Search Results

Search found 8923 results on 357 pages for 'wireless keyboard'.

Page 88/357 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

• Can't control connection bit rate using iwconfig with Atheros TL-WN821N (AR7010)

  - by Paul H

  I'm trying to reduce the connection bit rate on my Atheros TP-Link TL-WN821N v3 usb wifi adapter due to frequent instability issues (reported connection speed goes down to 1Mb/s and I have to physically reconnect the adapter to regain a connection). I know this is a common problem with this device, and I have tried everything I can think of to fix it, including using drivers from linux-backports; compiling and installing a custom firmware (following instructions on https://wiki.debian.org/ath9k_htc#fw-free) and (as a last resort) using ndiswrapper. When using ndiswrapper, the wifi adapter is stable and operates in g mode at 54Mb/s (whilst when using the default ath9k_htc module, the adapter connects in n mode and the bit rate fluctuates constantly). Unfortunately, with this setup I have to run my processor using only one core, since using SMP with ndiswrapper causes a kernel oops on my system. So I want to lock my bit rate to 54Mb/s (or less, if need be) for connection stability, using the ath9k_htc module. I've tried 'sudo iwconfig wlan0 rate 54M'; the command runs with no error but when I check the bit rate with 'sudo iwlist wlan0 bitrate' the command returns: wlan0 unknown bit-rate information. Current Bit Rate:78 Mb/s Any ideas? Here's some info (hopefully relevant) on my setup: Xubuntu (12.04.3) 64bit (kernel 3.2.0-55.85-generic) using Network Manager. My Router is from Virgin Media, the VMDG480. lshw -C network : *-network description: Wireless interface physical id: 1 bus info: usb@1:4 logical name: wlan0 serial: 74:ea:3a:8f:16:b6 capabilities: ethernet physical wireless configuration: broadcast=yes driver=ath9k_htc driverversion=3.2.0-55 firmware=1.3 ip=192.168.0.9 link=yes multicast=yes wireless=IEEE 802.11bgn lsusb -v: Bus 001 Device 003: ID 0cf3:7015 Atheros Communications, Inc. TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287] Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 idVendor 0x0cf3 Atheros Communications, Inc. idProduct 0x7015 TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287] bcdDevice 2.02 iManufacturer 16 ATHEROS iProduct 32 UB95 iSerial 48 12345 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 60 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 6 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) iwlist wlan0 scanning: wlan0 Scan completed : Cell 01 - Address: C4:3D:C7:3A:1F:5D Channel:1 Frequency:2.412 GHz (Channel 1) Quality=37/70 Signal level=-73 dBm Encryption key:on ESSID:"my essid" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Master Extra:tsf=00000070cca77186 Extra: Last beacon: 5588ms ago IE: Unknown: 0007756E69636F726E IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 32040C121860 IE: Unknown: 2D1AFC181BFFFF000000000000000000000000000000000000000000 IE: Unknown: 3D1601080400000000000000000000000000000000000000 IE: Unknown: DD7E0050F204104A0001101044000102103B00010310470010F99C335D7BAC57FB00137DFA79600220102100074E657467656172102300074E6574676561721024000631323334353610420007303030303030311054000800060050F20400011011000743473331303144100800022008103C0001011049000600372A000120 IE: Unknown: DD090010180203F02C0000 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00 iwconfig: lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"my essid" Mode:Managed Frequency:2.412 GHz Access Point: C4:3D:C7:3A:1F:5D Bit Rate=78 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0,

  Read the article

• How to stop my wireless adapter from received dhcp from router (windows)

  - by baobeiii

  Hi, I have a windows 7 computer which is connected via vpn to an OpenVpn server which happens to be in another country. I have all internet traffic being routed from my computer through the vpn to the server. However dns queries are not going through the vpn, but are instead going directly to my isp's dns via a route outside of the vpn tunnel. This is happening because my wireless adapter is configured to obtain DNS server address automatically. The router that stands between my computer and the internet happens to have a DCHP server running on it that is assinging my computer with the DNS addresses of the isp. The issue is, i haven't been able to stop my wireless adapter on my computer from receiving the dns settings from the router. I've tried selecting 'use the following dns server addresses' and then just leaving them blank, but ipconfig /all shows me that this hasn't worked and i'm still getting dns form the router. So is there any way to completely stop my windows wireless adapter from receiving these settings from the router? I have the OpenVpn server pushing to my computer's tun adapter the dns that it should be using. I'd rather solve this in a way that doesn't involve disabling the dhcp server on the router or fiddling with the router. The reason is i'm on a laptop and i want my vpn to not leak dns even when i'm out, for example in wireless hotspots. I know if i could just force the wireless adapter to ignore the router's dhcp server then my dns queries would go through the tunnel to the dns address pushed by the OpenVpn server. Sorry, i know thats long winded, if you have any idea's please do tell me. Thanks and merry xmas.

  Read the article

• Built-in trackpad and keyboard stopped working on my MacBook when I paired with Bluetooth keyboard a

  - by Daveyjoe

  I paired the magic mouse and keyboard from my iMac with my MacBook, now I can't use the built-in trackpad and keyboard anymore. I've tried deleting them from the Bluetooth preference pane but that doesn't fix the issue. I've used other bluetooth mice and keyboards with this MacBook before and not had this problem. My only thought is that possibly it's related to the fact that the peripherals came with the iMac and my MacBook now thinks that it's an iMac and doesn't have a built-in trackpad/keyboard.

  Read the article

• Access Domain over Wireless

  - by William

  I have an active directory server and all hard wired clients connect perfectly fine. However any wireless clients do not recognize that they are connected to the domain, despite the dns server being appropriately set to the domain controller for both wired and wireless connections. Also - both wired and wireless clients are on the same subnet. I am using a Verizon food actiontec router. What am I missing? For instance, this is the same computer connected first via an Ethernet cable and second via the wireless.

  Read the article

• 13.10 suspend kills wifi

  - by ser

  i tried to post to this thread Hardware wireless switch has no effect after suspend and 13.10 upgrade for if i understand their question i am having the same problem but the answer option won't work for me and maybe i am not supposed to post there anyway, i dunno lol...ack when i come out of suspend, the wireless is disconnected with the only way to get it to reinitialize/be recognized is to do a full restart. at first i thought it was my gnome shell (for lock screen disappeared there with 13.10) but when i switched to the default ubuntu it's still doing it and it's kinda driving me nuts for i have to reopen all my files and browsers/tabs/windows everytime. i'm only a geekling so i don't know how to show the terminal stuff the above asker shows, but it sounds like the same issue and it only started with 13.10 upgrade a few days ago. any help would be much appreciated!!! thanks so much ser

  Read the article

• In 12.04, with my Linksys WUSB54G USB adapter I can see the networks, but cannot connect to any of them

  - by tobye

  I recently loaded Ubuntu version 12.04 onto my computer, and I have a WUSB54G v4 USB wireless adapter. I first tried to get it to work by simply plugging my adapter into an open USB port. This seemed to work fine, it came up with a list of wireless adapters, so I clicked on the correct one and entered the security code. It looked like it was going to connect. It tried for about five minutes before I stopped it. I then decided to create a network as I also have one setup. I did this and it connected, only one problem, I couldn't get onto the internet. Please help me, I am new to Ubuntu and am totally lost.

  Read the article

• NetworkManager refuses to manage my WLAN interface

  - by user104167

  I'm using Ubuntu 12.10 with Gnome 3.6 on a brand-new Samsung NP900X4C. The installer detected the wireless adapter, took in the SSID and WPA passphrase, wrote these into /etc/network/interfaces and connected perfectly. Once installation was finished I wanted to switch to using NetworkManager to manage the wireless adapter, since this is much more convenient than fiddling with /etc/network/interfaces every time I find a new hotspot. Therefore I edited /etc/NetworkManager/NetworkManager.conf to set: [ifupdown] managed=true When I rebooted NetworkManager, the problems started: - The NetworkManager tray applet changed from saying device not managed to device not ready - I lost all internet connectivity as wlan0 would not associate to the Access Point - if I set managed=false in NetworkManager.conf and restarted both NetworkManager and networking services from the command-line, the Gnome desktop "semi-crashed" and lost all its Window Decorations, the panel, the launcher and basically became unusable. However if I restart the computer completely after setting managed=false, wlan0 once again works perfectly.

  Read the article

• C# - Sending keyboard events to (last) selected window

  - by Mil

  Hi guys, I want to use virtual keyboard assembly found here http://www.codeproject.com/KB/miscctrl/touchscreenkeyboard.aspx like on screen keyboard (OSK.exe) in Windows. Can someone please tell me how can I use it so that it always stays on top and yet for user to be able to select other windows on dekstop for keyboard input, just like "on screen keyboard" in Windows, specifically I don't know how to select last selected window (can't use GetForegroundWindow or GetFocus only, because when user clicks on virtual keyboard it gets focused and I get handle of keyboard window itself)? This is very urgent to me so any advice would be greatly appreciated. Thanks in advance.

  Read the article

• Joining two routers together, but I have no access to the second router, although I know it's IP address and Gateway

  - by JohnnyVegas

  I have temporarily moved into a rented apartment for 4 months, which has wireless. The trouble I am having is that the access points here are wifi only and no RJ45 and I need to use RJ45 to connect some equipment that I am working with. I have purchased an RT-N66U and installed Tomato (shibby ver. 1.28) and successfully replaced the existing access point, but now I want to enable the access point that I have replaced as it links wirelessly to 3 others. Can I plug in a cable from the access point to my RT-N66U and get it to access the internet via my router? I have no access to the existing wireless access point, and don't want to reset it as it's not mine. There is another router situated in the roof somewhere which I also have no access to, but it's supplying my RT-N66U internet and I most definitely have a double-nat, which although isn't the best way of doing things I am limited with what I can do. Any suggestions on routing tables, vlans etc would be helpful, but I have no experience in these fields before - but I know the tomato firmware can cater for this. My router is set to IP 10.0.1.1 and dhcp is 10.0.1.100-200 The wireless access point address was 192.168.1.2 but this was assigned by the router in the roof which has the address 192.168.1.1. There is a cable from this router going to a wall socket which I now have my RT-N66u attached to via the WAN port. I understand it's scruffy and it isn't the way to do things but I have tried to ask for the admin details but as the wireless network is looked after by a third party and nobody knows their details I am stuck with this dilemma. I could buy three wireless access points and replace the existing but this isn't what I want to do, and although I have installed plenty of DD-WRT wireless repeater bridges they simply don't work here for some unknown reason. The phone line here is very noisy too and I don't have the rights to install ADSL in a building that isn't mine, and 3G coverage isn't good enough either. Thanks for your time

  Read the article

• I can't connect to my network, except in safe mode

  - by eidylon

  My laptop cannot connect to my network all of a sudden except in safe mode. When it boots, it will show the networks available in the tray popup, but if I click connect on any, it says "Unable to connect" and the troubleshooter is useless. Shortly thereafter all the networks disappear. I have tried removing IPv6 support as I have seen that cause problems. No joy. I've also tried removing the wireless network adapter in Device Manager and reinstalling it, also no joy. I've also tried attaching a USB wireless adapter, and it has the same problem. If I boot in safe mode, then it has no problems at all. Three other devices in the house connect fine, so I am pretty sure it is nothing to do with the router. Any ideas what to check next? I am running Win7 Ultimate on a 2GHz Quadcore with 8GB RAM with a Broadcom 802.11n wireless card. EDIT: RE wired connections: What is very weird is that if i plug in a wired connection, then not only does it connect via the wired connection, but the wireLESS also starts working perfectly. And a soon as I unplug the wire, then the wireLESS stops working again! So it seems the wireless is right now working only in safe-mode, or when a wired connection is also plugged in.

  Read the article

• XP/Intel wirelss only showing 'hpsetup' ad-hoc network that isn't there

  - by ewall

  Trying to help my friend with her work XP laptop, which recently stopped seeing any wireless SSIDs except the SSID 'hpsetup' (presumably from a wireless-enabled HP printer). Relevant information: The laptop is a Lenovo T500 (Centrino 2 chipset) with XP SP3. The network adapter is Intel WiFi Link 5300 AGN (built-in). The latest version (13.5) of the Intel drivers only are installed, not the Intel config software, so XP is using the Wireless Zero-Config manager. The wireless router is a NetGear WGR614 v7 with 802.11b/g. The SSID is broadcasting, and all the other laptops in the house can see and connect to it. On the laptop, I have tried repairing the network connection, disabling power management, turning off 802.11a & n radio, and more... but it didn't help. Some of the wireless settings are managed by Group Policy from her office (I get the "At least one of your changes was not applied successfully to your wireless configuration" message). It is enforced to connect to "Access point (infrastructure) networks only". The real kicker is that my laptop does not an SSID named 'hpsetup' here, but it can see several broadcasted SSIDs including the one we want, while my friend's laptop doesn't see any SSID except 'hpsetup'. Any suggestions?

  Read the article

• Would a USB hub work in reverse?

  - by Tim

  Imagine for a moment with a 4 port USB hub. Normally how this would work is the hub has one plug that goes to the computer, then 4 ports that you can plug in other things to (thumb drive, keyboard, mouse etc). I am wondering if I can use it in reverse. So I would have 1 keyboard going in to the hub, and then plug in male to male usb cables from the 4 ports to 4 different PCs, my aim is that when a key is pressed on the keyboard all 4 PCs will receive it as if the keyboard were plugged in to them. Does anyone know if this would work? And if not does anyone have any ideas how I could get the same effect? EDIT: So I am looking for more of a KVM switch type device rather than a USB hub. However all of the KVM switches I've found use some sort of mechanism to select which computer you'll be using. (some are physical switches / buttons, others do it via software "automatically" some how) However I need to have 1 keyboard hooked up to 2 computers and when I press a key on the keyboard I want the keypress to be sent to both computers simultaneously, not to one or the other. Does anyone know if KVMs with this feature exist?

  Read the article

• vb.net, How can I limit a textchanged event for a textbox to keyboard input only?

  - by Luay

  Hi everyone, Please allow me to explain what I have and what I am trying to achieve. I have a textbox (called txtb1) and a button under it (called btn_browse) on a winform in a vb.net project. When the user clicks the button a folder browser dialog appears. The user selects his desired folder and when he/she clicks 'ok' the dialog closes and the path of the folder selected appears in the textbox. I also want to store that value in a variable to be used somewhere else(the value will be copied to an xml file when the user clicks 'apply' on the form, but this has no effect nor is related to my problem). To achieve that I have the following code: Public myVar As String Private Sub btn_browse_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btn_browse.Click Dim f As New FolderBrowserDialog If f.ShowDialog() = DialogResult.OK Then txtb1.Text = f.SelectedPath End If myVar = txtb1.text f.Dispose() End Sub This part works with no problems. Now, what if the user either: 1- decides to enter the path manually rather than use the browse button. or, 2- after using the browse button and selecting the folder they decide to manually change the location In trying to solve this I added a textchanged event to the textbox as follows: Private Sub txtb1_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtb1.TextChanged myVar = txtb1.Text End Sub However, this is not working. Apparently, and I don't know if this is relevant, when the user selects the desired folder using the browse button the textchanged event is also triggered. and when I click on the textbox (to give it focus) and press any keyboard key the application simply stops responding. So my questions are: am I going about this the right way? if my logic is flawed, could someone point me to how usually such a thing could be achieved? is it possible to limit the triggering events to only keyboard input as a way around this? I tried the keydown and keypress events but I am getting the freeze. I would be grateful for your help. Thanks

  Read the article

• Numpad doesn't work after booting up - forced to reconnect USB keyboard after startup

  - by HorusKol

  I've tried this on two different USB keyboards - both of which work fine on a different computer running Windows XP. For some reason, the numerical keypad doesn't work probably immediately after booting up - neither the numbers work, nor the 'home' commands and so on that you can use with the numlock off. It doesn't make a difference whether I press numlock on or off - the keypad doesn't work correctly no matter what state this is in. However, once I've booted the machine I can disconnect/reconnect the USB connector for the keyboard, and it will work exactly as expected. I'm running Gnome on Ubuntu 10.04. The only other USB devices connected is a mouse - and I've experienced no problems with that. This is a direct connection to the box (not via an external USB hub)

  Read the article

• Detecting long held keys on keyboard

  - by Robinson Joaquin

  I just want to ask if can I check for "KEY"(keyboard) that is HOLD/PRESSED for a long time, because I am to create a clone of breakout with air hockey for 2 different human players. Here's the list of my concern: Do I need other/ 3rd party library for KEY HOLDS? Is multi-threading needed? I don't know anything about this multi-threading stuff and I don't think about using one(I'm just a NEWBIE). One more thing, what if the two players pressed their respective key at the same time, how can I program to avoid error or worse one player's key is prioritized first before the the key of the other. example: Player 1 = W for UP & S for DOWN Player 2 = O for UP & L for DOWN (example: W & L is pressed at the same time) PS: I use GLUT for the visuals of the game.

  Read the article

• Mouse buttons and all keyboard buttons except alt and super randomly stops working

  - by bobbaluba

  A couple of times lately, unity appears to not accept button presses from neither the mouse or the keyboard. This happens after a random amount of time, usually a couple of hours, or right after boot. The weird thing is: I can still move the mouse around. I can press alt to get the unity menu thingy (but i can't type anything in it) I can press super to show/hide the unity search. None of the applications seem to get the input Ive tried connecting a second mouse, same issue I can press ctrl+alt+f1 to drop to a shell tty The shell works fine Now, this is definitely a bug, probably in unity(?), but it's hard to search for when I don't know what's causing it. Is there something I can do to debug? I've found some people that appears to be having the same problem with the mouse only, but most of the time, their questions are unanswered or closed for being too specific. What would be a good strategy to fix this? Should I report it as a bug?

  Read the article

• Hack a Wireless Doorbell for Customizable Ring Tones

  - by Jason Fitzpatrick

  When it comes to door bells, why limit yourself to a simple bell toll when you could be alerted to visitors by the Super Mario Bros. theme? This customizable doorbell hack brings ring tones to your front door. Check out the video above to see it assembled and in action, then hit up the link below for the wiring diagrams and step-by-step instructions. How to Add Custom Ringtones to a Wireless Doorbell [via Hacked Gadgets] How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

  Read the article

• Keyboard shortcut: Win key doesn't work for custom commands

  - by Xiè Jìléi

  It's all ok before upgraded from 10.04 to 12.04. It seems all right. In keyboard shortcut window, if I pressed Win+V, it can capture the key combination as Super+V, no problem. I've checked the output from xev utility, the left and right Win keys are translated to Super_L and Super_R correctly. I have found a workaround, though. Using gconf-editor, edit the entries /desktop/gnome/keybindings/*/binding and replace <Super> with <Mod4> for the problem bindings. However Super+... keys do work for most built-in actions such as "switch workspace", they just don't work for custom commands.

  Read the article

• Printing to a printer connected to a wireless router

  - by mspencer

  I have a Netgear WNDR4500 wireless router which allows me to print wirelessly to a printer connected to it via a USB cable. However, the software used to print to it only works for Windows and OS X. I've seen the question Printing to a printer attached to a network USB hub, and tried the instructions it gave using my router's IP address, but when I print a test page it says copying data then says printer is in use. In the printer queue window it says not connected. How can I print to the printer using Ubuntu? Thanks.

  Read the article

• Keyboard settings for a Mac+PC world

  - by Sahil Malik

  SharePoint, WCF and Azure Trainings: more information I’m one of those weridos who lives in a Mac+PC world. I write code for both iOS and Windows platforms. I also travel quite a bit, and airlines and airport security are starting to weigh your carry ons, and beginning to frown on the powerplant of batteries you need to carry to power SharePoint on an airplane. This means, my main work machine has to be a Macbook Pro, since it is the only machine that can do both XCode and Visual Studio Virtualized and SharePoint virtualized nicely. The problem this causes of course, is you will literally pull your hair out when dealing with keyboard/shortcut differences. So here is my work setup, Running Mac for all my normal work Virtualizing using VMWare Fusion – and sometimes I move these VMs to my windows server so I can run them on VMware workstation. Frequently RDP’ing into VMs in the cloud or running on my home server. So, Read full article ....

  Read the article

• Wireless always disconnect

  - by Silas

  I upgraded my Ubuntu 10.10 for Ubuntu 12.04. I have a Emachines E625 With Ubuntu 12.04 my wireless always disconnects every 10 sec. It didn't do that with 10.10. Here is my config: Linux sylvain-eMachines-E625 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:54:40 UTC 2012 i686 athlon i386 GNU/Linux total used free shared buffers cached Mem: 1759 1425 333 0 46 925 -/+ buffers/cache: 452 1306 Swap: 1788 0 1788 02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 05:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) I will really enjoy an answer to solve this problem. Thank you in advance! Silas

  Read the article

• Ubuntu stops letting wired or wireless mice click through after a short while

  - by Jonathan Chan

  Hi! I have a very confusing problem that renders Ubuntu near unusable. Whenever I try to use any wired or wireless mouse with my Ubuntu 10.10 install, clicks stop going through - often times, this blockage of clicks happens in less than a minute. Sometimes no clicks are accepted, other times, clicks are accepted in certain windows and denied in others. The end result is the same, and I am forced to resort to using the keyboard to navigate. If anyone could help me resolve this problem, I would be very appreciative, as it would finally allow me to try Ubuntu. Thanks!

  Read the article

• Inputting cheat codes - hidden keyboard input

  - by Fibericon

  Okay, here's what I want to do - when the player is at the main menu, I want them to be able to type in cheat codes. That's the only place I want it to work. I don't want to give them a text box to type into. Rather, I want them to simply type in a word (let's say "cheat", just for simplicity sake) that activates the cheat code. I only need to capture keyboard input when the window is in focus. What can I do to accomplish this?

  Read the article

• Unwittingly activate wrong wireless driver and now cannot activate the correct one

  - by Sumeth Chaochuti

  I just installed Kubuntu 10.10 on my MacBook 3,1 and found no wireless connection. Using KPackageKit I activated Broadcom b43 because it had already been selected for me. When I subsequently tried to activate Broadcom STA, however, I was returned with an error. After reading Jockey log I removed the wrong driver and reinstalled all drivers so that I can activate the correct one. It hasn't work even though KPackageKit now shows that I have installed: bcmwl-kernel-source bcmwl-modaliases broadcom-sta-common broadcom-sta-source According to the log it appears as if there are conflicts but I don't know how to rectify it. I'm completely new to the platform, just started using Kubuntu 2 days ago. I'll appreciate any advice anyone can give. Thanks.

  Read the article

• Wireless mouse temporarily freezes when resume from standby

  - by R Pennese

  I have been getting a very annoying problem since recently in Ubuntu 12.04, probably due to another update that did more bad than good... When I resume from sleep on my Lenovo Thinkpad T420, my wireless laser mouse (Logitech M705) freezes at regular intervals (15.20 seconds) for 5 seconds then works again. This happens regardless if the computer is on battery or on AC power. How do I debug this? I am getting tired of the fact that my system gets more and more unstable over time while it should be the opposite...

  Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >