Search Results

Search found 9706 results on 389 pages for 'boot ini'.

Page 89/389 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

  • Can't boot Ubuntu 12.04 from external Hard Drive using Mac

    - by Catgirl the Crazy
    Recently, I upgraded the RAM and hard drive on my Early 2008 Macbook to improve the performance. Rather than throw away the old hard drive, I bought an enclosure for it to turn it into an external hard drive, and, since all the data was migrated to my new drive, I decided to install Ubuntu on it for funsies (note: I am a near-total Ubuntu n00b). My first attempt to install Ubuntu didn't work (it gave me errors about not being able to find the BIOS or something), but my second attempt finished successfully (can't remember what, if anything, I did different). However, when I plug the external drive into my Macbook, it gives me a message saying it can't read the disk. Moreover, when I go into the Startup Manager (i.e.: what you get when you turn on the Macbook while holding the option key), the external drive is not one of the available startup disks. I thought this might be because I have an older Macbook, so I tried booting it with my mom's Late 2011 Macbook, and got the same results. Then I tried booting it through my dad's Dell laptop that runs Windows 7, and that time it worked. This is really counter intuitive to me, since the hard drive originally came from a Macbook, so if anything you'd think it would be less compatible with the Windows laptop than the Macbook. In case it helps, here's a link to a picture of how I set up the partition table while doing the install (not shown there is the fact that I checked the "Format?" box next to the /boot partition, since it gave me a warning when I tried to continue the installation without doing so) Anyone have any clue at all? If it helps, the hard drive I'm using is a 120GB 5400-rpm Serial ATA hard disk drive.

    Read the article

  • External monitor is blank if I boot with the monitor plugged in

    - by Ronald
    Ubuntu 12.04 has problem with Intel GM45 Chipset, featuring the the Mobile Intel® Graphics Media Accelerator (GMA) 4500MHD I have a COMPAQ Presario CQ70 laptop with an Intel GM45 chipset that features the Mobile Intel® Graphics Media Accelerator (GMA) 4500MHD. I was using the second HDMI video port to drive both a projector or a second monitor. Everything was working fine under Ubuntu 8.04, 9.04, 10.04 and 11.04, however, when I upgraded to 12.04 the second monitor stopped working. What I mean when I say stopped working is: boot with monitor plugged in. Blank screen! Power off, unplug monitor and power on everything works. Plug in monitor (only mode that works in Mirror mode) two monitors that look same. Close laptop lid. screen goes blank only option for useful system is power off and unplug monitor. If I attempt to Adjust the monitor to maximum resolution that the monitor will handle and turn off mirror mode nothing can be moved onto that screen. This all worked fine with earlier versions of Ubuntu, is there a notes about the changes to the graphics management system in 12.04, like there is for the resolver change?

    Read the article

  • ASUS EPC 1015CX won't boot with display after installing additional drivers

    - by Dinesh
    I have a ASUS EPC 1015CX with Ubuntu 12.04 LTS installed using wubi alongside Windows 7. It worked perfectly after installing except that the supported screen resolution was only 800*600 instead of 1024*600. The specifications of the 1015CX device can be found here I tried installing additional drivers which was Broadcom for wireless and Cedarview-drm. By this time there was no display coming up after the boot. I could hear a voice and then the letters I typed got pronounced correctly. So, I guessed the issue has to be with the graphic terminal. I tried repair broken packages in the menu and booted and the display is now at 1024*600. But, if I restart normally the problem continues like before. As per what I found out after searching, I again opened additional drivers and installed Cedarview-graphics-driver. I tried restarting hoping it will work. But again, the result was same. There was no display but the system was working. I did more searching and followed the instructions found here. But still the result was same. I am keen to switch to linux from windows after hearing and learning great things about it. I know this community is good and always helping. I wanted to thank you all for the help in advance. Please let me know what I am doing wrong and help me to switch to linux from this same old windows.

    Read the article

  • mdadm starts resync on every boot

    - by Anteru
    Since a few days (and I'm positive it started shortly before I updated my server from 13.04-13.10) my mdadm is resyncing on every boot. In the syslog, I get the following output [ 0.809256] md: linear personality registered for level -1 [ 0.811412] md: multipath personality registered for level -4 [ 0.813153] md: raid0 personality registered for level 0 [ 0.815201] md: raid1 personality registered for level 1 [ 1.101517] md: raid6 personality registered for level 6 [ 1.101520] md: raid5 personality registered for level 5 [ 1.101522] md: raid4 personality registered for level 4 [ 1.106825] md: raid10 personality registered for level 10 [ 1.935882] md: bind<sdc1> [ 1.943367] md: bind<sdb1> [ 1.945199] md/raid1:md0: not clean -- starting background reconstruction [ 1.945204] md/raid1:md0: active with 2 out of 2 mirrors [ 1.945225] md0: detected capacity change from 0 to 2000396680192 [ 1.945351] md: resync of RAID array md0 [ 1.945357] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 1.945359] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 1.945362] md: using 128k window, over a total of 1953512383k. [ 2.220468] md0: unknown partition table I'm not sure what's up with that detected capacity change, looking at some old logs, this does have appeared earlier as well without a resync right afterwards. In fact, I let it run yesterday until completion and rebooted, and then it wouldn't resync, but today it does resync again. For instance, yesterday I got: [ 1.872123] md: bind<sdc1> [ 1.950946] md: bind<sdb1> [ 1.952782] md/raid1:md0: active with 2 out of 2 mirrors [ 1.952807] md0: detected capacity change from 0 to 2000396680192 [ 1.954598] md0: unknown partition table So it seems to be a problem that the RAID array does not get marked as clean after every shutdown? How can I troubleshoot this? The disks themselves are both fine, SMART tells me no errors, everything ok.

    Read the article

  • mdadm: breaks boot due to "is not ready yet or not present" error

    - by BarsMonster
    This is so damn frustrating :-| I've spent like 20 hours on this nice error, and seems like dozens of people over Internet too, and no clear solution yet. I have non-system RAID-5 of 5 disks, and it's fine. But during boot up it says that "/dev/md0 is not ready yet or not present" and asks to press 'S'. Very nice for Ubuntu Server - I have to bring monitor and keyboard to go next. After this system boots and it's all fine. md0 device works, /proc/mdstat is fine. When I do mount -a - it mounts this array without errors and works fine. As a dumb and shameful workaround I added noauto in /etc/fstab, and did mounting in /etc/rc.local - it works fine then. Any hints how to make it work properly? fstab: UUID=3588dfed-47ae-4c32-9855-2d69df713b86 /var/bigfatdisk ext4 noauto,noatime,data=writeback,barrier=0,nobh,commit=5 0 0 mdadm config: It is autogenerated: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR CENSORED # definitions of existing MD arrays ARRAY /dev/md/0 metadata=1.2 bitmap=/var/md0_intent UUID=efccbeb6:a0a65cd6:470dcdf3:62781188 name=LBox2:0 # This file was auto-generated on Mon, 10 Jan 2011 04:06:55 +0200 # by mkconf 3.1.2-2

    Read the article

  • mdadm: brakes boot due to "is not ready yet or not present" error

    - by BarsMonster
    This is so damn frustrating :-| I've spent like 20 hours on this nice error, and seems like dozens of people over Internet too, and no clear solution yet. I have non-system RAID-5 of 5 disks, and it's fine. But during boot up it says that "/dev/md0 is not ready yet or not present" and asks to press 'S'. Very nice for Ubuntu Server - I have to bring monitor and keyboard to go next. After this system boots and it's all fine. md0 device works, /proc/mdstat is fine. When I do mount -a - it mounts this array without errors and works fine. As a dumb and shameful workaround I added noauto in /etc/fstab, and did mounting in /etc/rc.local - it works fine then. Any hints how to make it work properly? fstab: UUID=3588dfed-47ae-4c32-9855-2d69df713b86 /var/bigfatdisk ext4 noauto,noatime,data=writeback,barrier=0,nobh,commit=5 0 0 mdadm config: It is autogenerated: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR CENSORED # definitions of existing MD arrays ARRAY /dev/md/0 metadata=1.2 bitmap=/var/md0_intent UUID=efccbeb6:a0a65cd6:470dcdf3:62781188 name=LBox2:0 # This file was auto-generated on Mon, 10 Jan 2011 04:06:55 +0200 # by mkconf 3.1.2-2

    Read the article

  • Ubuntu 12.04 nomodeset fixes boot problem but causes screen resolution to get stuck

    - by Thunder
    I've been searching the askubuntu forum for the past 3 days trying to figure out what's going on with my system and I have tried a lot of things but to no avail. So, I will explain my situation and tell you what I have tried and I hope someone can help me :) I have an: HP Workstation xw4100 Pentium(R) 4 3.00 GHz 1.5 GB RAM NVIDIA Quadro4 380 XGL graphics card It came with Windows XP and I set it up (with WUBI) to dual boot with Ubuntu 12.04 After installation I had the problem that so many people had with it booting to a black screen (mine was actually booting to the terminal basic shell) that is fixed by adding nomodeset into the grub. When I do that, MY screen resolution becomes stuck in 1280x768 (as opposed to 1366x768 before adding nomodeset) (and also, when running XP the best resolution is 1280x720) When I go to "additional drivers" it doesn't show any proprietary drivers, so I manually downloaded them using this command: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current but after rebooting, that made the graphics even worse (now stuck as 800x600) SO I tried to configure the drivers with sudo nvidia-xconfig but that simply created an empty xorg.config file. I found one place where a guy gave information to manually input into the xorg.config file but that had no effect at all. Lastly I tried to install previous versions of the NVIDIA drivers, but they wouldn't even fully install. So now I have just re-installed Ubuntu 12.04 and I either need to find a better solution to the first problem (nomodeset) or get the nouveau driver to correctly configure to work with my nvidia graphics. Thanks for your help ahead of time!

    Read the article

  • Colored Vertical Lines upon boot and nomodeset DOES NOT fix it

    - by user2851032
    I have installed Lubuntu 13.04 on a Dell Inspiron 1501 laptop, rebooted the machine and encountered this problem. I edited the GRUB configuration to remove "quite splash" and enter "nomodeset", updated grub, and everything was fine. I could reboot the machine without any trouble. However, if I unplug the machine, wait a few seconds, and plug it back in, the problem with the colored lines comes back and nomodeset no longer helps to solve the problem. I tried using radeon.modeset=0 instead of nomodeset and that also works on multiple reboots until I unplug the machine and plug it back in. I was finally able to get around the problem by entering "radeon.exapixmaps=0" instead of radeon.modeset=0. I suppose I kind of made up that boot option using some information from an Arch Wiki page. This would work throughout reboots and even if I unplugged the laptop. It was working fine for quite a while. A few weeks later, I had some unrelated issues with the Java iced-tea plugin, and since 13.10 had just come out, I thought I would try upgrading. So upgrading didn't fix the problem with Java, and after unplugging the machine and trying to use it later, I was back to this problem with the black screen and colored vertical lines. I am completely out of ideas on what to try. It took me a week to figure out how to get it working the first time, but the solution I had isn't working anymore.

    Read the article

  • Boot ubuntu 12.04 in 3D - nomodeset quiet splash install

    - by rahi
    I would like to enable 3D in Ubuntu 12.04. I recently tried to install ubuntu on a new computer. When the installation was complete and I rebooted the machine, I could only see a blank screen. After some searching, I followed this tutorial which instructed me to boot with "nomodeset" enabled. I choose this on the USB I was installing ubuntu 12.04 from. Fortunately, the ubuntu installation on the new computer was successful. When I tried to change the size of the unity launcher icons, I did not see that option (as I see on my other computer running ubuntu 12.04). I tried installing MyUnity and it told me that the computer I had just installed 12.04 to was running in 2D. To my knowledge. all the software is up to date (as I ran the Software Updater). In addition, when I look for Additional Drivers, I see a message that says "No proprietary drivers are in use on this system". When I look under System Details Graphics, I see the Driver as "VESA:Intel Sandybridge/Ivybridge Graphics. When I hold the shift key on when my machine boots up, and type "e" on the Grub menu, I see the following towards the end, "nomodeset quiet splash $vt_handoff". Does this have anything to do with the plain 2D ubuntu 12.04 experience? Again, what I'd like to do now is get the 3D experience on my new machine running 12.04. Please let me know if you need more information.

    Read the article

  • Cryptswap boot error - can't mount?

    - by woody
    I believe i have my swap set up but am not sure because on start up it says that it is something along the lines of "could not mount /dev/mapper/cryptswap1 M for manual S for skip". But it appears to be mounted? I have already tried this solution with no success. When i run free -m the output is: total used free shared buffers cached Mem: 3887 769 3117 0 54 348 -/+ buffers/cache: 366 3520 Swap: 4026 0 4026 and sudo bklid is: /dev/sda1: UUID="9fb3ccd6-3732-4989-bfa4-e943a09f1153" TYPE="ext4" /dev/mapper/cryptswap1: UUID="bd9fe154-8621-48b3-95d2-ae5c91f373fd" TYPE="swap" and cat /etc/crypttab is: cryptswap1 /dev/sda5 /dev/urandom swap,cipher=aes-cbc-essiv:sha256 my /etc/fstab is: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=9fb3ccd6-3732-4989-bfa4-e943a09f1153 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation #UUID=bb0e378e-8742-435a-beda-ae7788a7c1b0 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 cat /proc/swaps output is: Filename Type Size Used Priority /dev/dm-0 partition 4123644 0 -1 Is my swap not setup correctly or how can i fix my boot message?

    Read the article

  • Install Mac OS Lion on Macbook with existing Ubuntu 12.04 dual boot

    - by kash
    I don't usually create my own questions, because I can find what I need through other people's questions. However, this one doesn't seem to be anywhere, except in one place where someone is talking about not using Apple hardware. So here it goes. I am using Apple hardware. I have a MacBook 1,1 with Intel Core2Duo running Ubuntu Precise Pangolin flawlessly. I never considered starting with Mac OSx and dual-booting because I never liked Mac OS. Now that I'm realizing that the only way I'm going to be able to run my DAW (Reaper) nicely and use a Firewire recording interface is to run Mac OSx, I'm considering it again. I want to go the opposite direction of most people and install Mac OSx next to an existing Ubuntu installation and have a boot menu with refit. I've installed refit in Ubuntu and I've converted the .dmg file for Mac OS Lion to a .iso file. Now, should I mount the .iso in Ubuntu and run it there, or burn a DVD and restart? I'm trying to gauge how to do this without hurting my existing Ubuntu installation. I will of course keep looking for existing answers in the meantime.

    Read the article

  • Upgrading Ubuntu(32 bit) 10.10 -> 11.04 fails and causes a kernel panic on boot

    - by Ubuntu Upgrade
    On Ubuntu 10.10 machine Upgrade to Ubuntu 11.04 using the update manager. The upgrade fails and leaves the system in an unstable state. When I reboot the system I get a kernel panic on boot. The error points to /opt/abc/runtime/lib/libc.so.6. By researching on this I found that there is a third party software abc causes problem. It has it's own runtime(libc) library. In /lib/ directory there is a link file /lib/ld-abc.so.2 ---/opt/abc/runtime/lib/ld-linux.so.2. If we rename this file to /lib/abc.so.2 or remove this file the the upgrade is success. Here is the upgrade log of where it crashes(apt-term.log) ===== Services restarted successfully. Processing triggers for libc-bin ... ldconfig deferred processing now taking place /usr/bin/dpkg: /opt/abc/runtime/lib/libc.so.6: version `GLIBC_2.11' not found (required by /usr/bin/dpkg) /usr/bin/dpkg: /opt/abc/runtime/lib/libc.so.6: version `GLIBC_2.8' not found (required by /lib/libselinux.so.1) ===== Could you please let me know what would be the problem of having a run time link library file in /lib directory. Does the ubuntu upgrade check the 3rd part runtime as well?

    Read the article

  • My new hard drive won't automount on boot

    - by user518
    I installed a new hard drive right before installing the new Ubuntu 11.10 by reformatting, not upgrading. I was able to mount my drive, and partition it. It's a 1TB, and I was able to transfer all of my music, and videos to it. For some reason, it won't mount on boot, and I can't figure out how to manually mount it afterwards either. Here's my current /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=e0fbdf09-f9a0-4336-bac3-ba4dc6cfbcc0 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=adf15180-c84c-4309-bc9f-085fd7464f89 none swap sw 0 0 /dev/sdc1 /media/sdc1 ext4 defaults 0 0 The last line is what I added for my hard drive. Here's the output from sudo lshw -C disk: % sudo lshw -C disk ~ *-disk:0 description: ATA Disk product: ST3250310AS vendor: Seagate physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 3.AD serial: 6RYBF2QE size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000da204 *-cdrom description: DVD-RAM writer product: DVD+-RW DH-16A6S vendor: PLDS physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: YD11 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc

    Read the article

  • Used mountmanager now Ubuntu hangs on boot

    - by fpghost
    I was using MountManager in Ubuntu 12.04 to set user permissions in mounting hard drives. I set each partititon to be mountable by everyone instead of admin only. Then I clicked Apply in the file menu and it gave me the message successfully updated. Upon restarting Ubuntu, just hangs on the splash screen and does not boot any further. Windows still boots fine. How can I fix these? please help thanks From LiveUSB: my fstab looks like: overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0 /dev/sda5 swap swap defaults 0 0 /dev/sda7 swap swap defaults 0 0 Is this corrupted? Other things that may be helpful: blkid returns /dev/loop0: TYPE="squashfs" /dev/sda1: LABEL="System Reserved" UUID="0AF26C31F26C22E5" TYPE="ntfs" /dev/sda2: UUID="5E1C88E31C88B813" TYPE="ntfs" /dev/sda3: UUID="94B2BB7DB2BB6282" TYPE="ntfs" /dev/sda5: UUID="41b66b9a-2b48-45cf-b59d-cd50e41ec971" TYPE="swap" /dev/sda6: UUID="c73ca79e-4fa4-4bde-967e-670593736f6a" TYPE="ext4" /dev/sda7: UUID="c05d659f-103c-4444-9dc4-3121b9e081d6" TYPE="swap" /dev/sdb1: LABEL="PENDRIVE" UUID="1DE8-0A49" TYPE="vfat" and cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=1950000k,nr_inodes=206759,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=783056k,mode=755 0 0 /dev/sdb1 /cdrom vfat rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,erro rs=remount-ro 0 0 /dev/loop0 /rofs squashfs ro,noatime 0 0 tmpfs /cow tmpfs rw,noatime,mode=755 0 0 /cow / overlayfs rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 gvfs-fuse-daemon /home/ubuntu/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=999,group_id=999 0 0

    Read the article

  • Ubuntu 12.04 fresh install wont boot up

    - by user147220
    im running ubuntu 12.04 and it refuses to boot up. the screen will come on for a second, the mosue will appear, then itll go black again all inside about 3 seconds. i let it just do that for a while and eventually a window popped up saying i had a display issue. I didn't have a mouse but there was a button saying "ok" at the bottom that i couldnt click on. i hit enter, got through that screen, now im looking at another that says "What would you like to do?" - run in low-graphics mode for just one session - reconfigure graphics - troubleshoot the error - exit to console login then two buttons, cancel, and ok. I dont have a mouse and its not letting me navigate between these options with tab. firstly, if i make it through these windows will it get me into the computer so i can try and fix whats going on? also, whats going on here? also, how can i click on these buttons without the use of tab or a mouse?

    Read the article

  • How can I dual boot my iphone or ipad to run a very simple custom os?

    - by Jim98
    I am an experienced C/C++ programmer and have worked with assembly and many other programing language and I want to start a project as a learning process. I want to try and run a simple custom os on the iphone or ipad. What knowledge would I need to do this, and how does the iphone or ipad bootloader load the os and how could I modify it to load a custom os? Im not really sure what to ask here so I really just need to get as much information as possible so I could ask some more informed questions to get my project started Thanks

    Read the article

  • Booting the liveCD/USB in EFI mode fails on Samsung Tablet XE700T1A

    - by F.L.
    My tablet is Samsung Series 7 Slate (XE700T1A-A02FR (French Language)). It operates an Intel Sandy Bridge architecture. The main issue about this tablet is that it ships with an installed Windows 7 in (U)EFI mode (GPT partition table, etc.), so I'd like to get an EFI dual boot with Ubuntu. But it seems I can't boot on the liveCD in EFI mode. It starts loading (up to initrd), but I then get a blank (black) screen. I've tried the nomodeset kernel option (as well as removing quiet and splash) with no luck. [2012-09-27] I have used the Ubuntu 12.04.1 Desktop ISO (I have read somewhere that it is the only one that can boot in EFI mode). I'd say this has something to do with UEFI since the LiveCD boots in bios mode but not in efi mode. Besides, I am not sure my boot info will help, since I can't boot the LiveCD in EFI mode. As a result I can't install ubuntu in EFI mode. So it would be the boot info from the liveCD boot in bios mode. This happens on a ubuntu-12.04.1-desktop-amd64 iso used on a LiveUSB. Live USB was created by dd'ing the iso onto the full disk device (i.e. /dev/sdx no number) of the Flash drive. I have also tried copying the LiveCD files on a primary GPT partition, but with no luck, I just get the grub shell, no menu, no install option. [2012-09-28] I tried today a flash drive created with Ubuntu's Startup Disk Creator and the alternate 12.04.1 64 bit ISO. I get a grub menu in text mode (which meens it did start in efi mode) with install options / test options. But when I start any of these, I simply get a black screen (no cursor, neither mouse nor text-mode cursor). I tried removing the 'quiet' option and adding nomodeset and acpi=off, but it didn't do any good. So this is the same result as for the LiveCD. [2012-10-01] I have tried with a version of the secure remix version via usb-creator-gtk. The boot on the USB key has the same symptoms. Boot in EFI mode is impossible (I have menu but whatever entry I choose, I get the blank screen problem). The boot in BIOS mode works, I did the install. Then I used boot-repair to try installing grub-efi and get a system that would boot in efi mode. But I can't boot this system, because the EFI firmware doesn't seem to detect that sda contains a valid efi partition. Here is the resulting boot-info Boot info 1253554 [2012-10-01] Today, I have reinstalled the pre-shipped version of windows 7, and then installed ubuntu from a secure-remix iso dumped on USB flash drive vie usb-creator-gtk booted in BIOS mode. When install ended, I said "continue testing" then I used boot-repair to try get the bootloader installed. Now, when I boot the tablet, I get the grub menu, it can chainload windows 7 flawlessly. But when I try to start one of the ubuntu options I get the same old blank screen. Here is the new boot-info: Boot info 1253927 [2012-10-01] I tried installing the 3.3 kernel by chrooting a live usb boot (secure remix again) into the installed system. Same symptoms. I feel the key to this is that the device's efi firmware (which is EFI v2.0) would expose the graphics hardware in a way that prevents the kernel to initialize it, and thus prevents it from booting (the kernel stops all drive access just after the screen turns kind of very dark purple). Here is some info on the UEFI firmware as given by rEFInd: EFI revision: 2.00 Platform: x86_64 (64 bit) Firmware: American Megatrends 4.635 Screen Output: Graphics Output (UEFI), 800x600 [2012-10-08] This week end I tried loading the kernel with elilo. Eventhough I didn't have more luck on booting the kernel, elilo gives more info when loading the kernel. I think the next step is trying to load a kernel with EFI stub directly.

    Read the article

  • API numbers don't match on compiled PHP extension

    - by tixrus
    I'm trying to get GD into my PHP. I recently installed PHP5.3.0 on my system running Mac Leopard using mac ports. It did not come with the gd module. So I downloaded gd, compiled it as an extension module as per http://www.kenior.ch/macintosh/adding-gd-library-for-mac-os-x-leopard, made php.ini point to it, restarted apache etc. But no GD. So in apache error log it says PHP Warning: PHP Startup: gd: Unable to initialize module\nModule compiled with module API=20060613\nPHP compiled with module API=20090115\nThese options need to match\n in Unknown on line 0 So a bit of googling says I should not use the phpize I have before configuring and making these. I should use a new one called phpize5. I surely don't have any such thing. Unless its packed up inside something else in my php5.3. distro. Where do you get it. In Ubuntu I could just run sudo apt-get install php-dev, (apparently) and it would just appear by magic. At least that's what the webpage said. Unfortunately I am running MacOSX version Leopard. How can I build this GD module on Leopard so that it will match the API number in my PHP?

    Read the article

  • Install Linux Mint on PC without bootable CD

    - by crosenblum
    Unfortunately my PC's CD drive is not bootable; I have such a mixture of SATA and IDE drives, so until I have more money to redo my controller setup, I can't boot from any cd. Currently, I have a DVD burned with latest version of Linux Mint, and I have an USB drive with an old version of Mint. I have a partition ready to install Linx Mint into, but no idea how to install it, since I can only boot to my hard drive. I am totally unable to boot to CD, so that is definitely out. My main partition is WinXP Pro SP3. Is there software I can use to format my Linux partition, so that I can then just copy Mint over to that partition? Or is there a better way to install linux mint? I have to do it within Windows XP, since that's all that I can boot right now. I have considered Mint4Win, but that doesn't allow a full installation of Linux Mint. Any ideas?

    Read the article

  • a disk read error occurred

    - by kellogs
    Hi, ¨a disk read error occurred¨ appears on screen after choosing to boot into Windows XP from GRUB. [root@localhost linux]# fdisk -lu Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x48424841 Device Boot Start End Blocks Id System /dev/sda1 63 204214271 102107104+ 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 204214272 255606783 25696256 af HFS / HFS+ Partition 2 does not end on cylinder boundary. /dev/sda3 255606784 276488191 10440704 c W95 FAT32 (LBA) Partition 3 does not end on cylinder boundary. /dev/sda4 276490179 312576704 18043263 5 Extended /dev/sda5 * 276490240 286709759 5109760 83 Linux /dev/sda6 286712118 310488254 11888068+ b W95 FAT32 /dev/sda7 310488318 312576704 1044193+ 82 Linux swap / Solaris sda is a 160GB hard disk with quite a few partitions and 3 OSes installed. I am able to boot into Linux and Mac OS fine, but not into Windows anymore. The Windows system is located on /dev/sda1. I can not recall how exactly have I used testdisk but it once said that ¨The harddisk /dev/sda (160GB / 149 GB) seems too small! (< 172GB / 157GB)¨ or something simillar. So far I have tried to ¨fixboot¨ and ¨chkdsk¨ from a recovery console on the affected windows partition (/dev/sda1), the plug off power cord for 15 seconds trick, reinstalling GRUB, repairing the MFT and boot sector of the affected partition via testdisk, what next please ? Thank you!

    Read the article

  • Linux Uninstalling errors

    - by Zack
    I want to uninstall back-track 5 so I deleted the partitions for back-track os. After deleting the partition that used to be for back-track becomes free space as in picture. But I can't delete that partition nor creating a new partition. I used G-Parted from hiren boot cd but it says there is no partition table, you need to create a partition table. But actually I have 5 partitions already. And I thought of restarting might fix it. But after showing post screen my laptop show grub error. I don't know what to do, and I tried to install back-track again to fix the problem but it also says that i do not have any partitions. I can only boot windows by passing through hiren boot cd. But most of the time My computer is not recognizing the external dvd drive, nor the internal so i have to restart again and again, hoping to catch the time computer recognize the dvd drive. Can I change the boot loader to correct the grub error? SOLVED : I have solved the grub error by writing MBR again by using EasyBCD But I still have the format error.

    Read the article

  • "sr0" I/O read boot error in Xubuntu 12.10

    - by Entropicurity
    Just recently upgraded Xubuntu 12.10 after having installed 12.04 originally. Ever since that happened, any time I inserted a disk into my DVD/CD reader/writer I would end up getting a number of error messages from my DVD player/Audio player softer, typically with any of them either crashing or returning a GStreamer backend error. So doing some research I tried to mount it manually, and it typically returned the error messages you'll see below: (using the dmesg | grep "sr0" command) [17545.435584] end_request: I/O error, dev sr0, sector 0 [17545.492968] sr 3:0:0:0: >[sr0] [17545.492981] sr 3:0:0:0: >[sr0] [17545.492992] sr 3:0:0:0: >[sr0] [17545.493003] sr 3:0:0:0: >[sr0] CDB: [17545.493020] end_request: I/O error, dev sr0, sector 0 [17545.493058] EXT3-fs (sr0): error: unable to read superblock [17545.553224] sr 3:0:0:0: >[sr0] [17545.553237] sr 3:0:0:0: >[sr0] [17545.553247] sr 3:0:0:0: >[sr0] [17545.553258] sr 3:0:0:0: >[sr0] CDB: [17545.553275] end_request: I/O error, dev sr0, sector 0 [17545.553312] EXT4-fs (sr0): unable to read superblock [17545.611482] sr 3:0:0:0: >[sr0] [17545.611494] sr 3:0:0:0: >[sr0] [17545.611504] sr 3:0:0:0: >[sr0] [17545.611514] sr 3:0:0:0: >[sr0] CDB: [17545.611531] end_request: I/O error, dev sr0, sector 0 [17545.611568] FAT-fs (sr0): unable to read boot sector When I grepped this, the number of error messages just seemed to spill all over the screen, and typically all revolve around the I/O error. I then went into VLC and tried to run the stuff through there, but for some reason it won't read with the default devices. Instead I have to manually input sr0 into each of the /dev/ references and it will play just fine, until I exit out of the program, at which point I have to re-input everything. I have already installed all the media dependencies, both open source and restricted, through the software center. I just found this strange, as out of the box 12.04 there wasn't any problem what so ever. At this point, it could be that all my audio CD's are not in a format that is familiar with the OS (I've read in some places that EXTF4 has issues with this) but I don't see how that could be a problem when the above error messages even tested to see if it is EXT3 as well? I've tried my best to troubleshoot this up till now using existing topics, but it seems that this is a regular problem with a multitude of varying factors that incorporate into it, including but not limited to read/write problems with the format of the CD and right protection. Is there something integral that I am missing?

    Read the article

  • PLESK PostFix Error Local in maillog, how to troubleshoot

    - by RCNeil
    I'm using the PHP mail() function, using PostFix, on CentOS6, Plesk 10.4, and my email is not getting delivered to a particular address. My personal GMail and Yahoo email addresses receive email from my server fine and do not produce errors. After a wonderful suggestion on here, I checked my mail logs, and this is the error I see : Apr 10 10:26:29 ######### postfix/qmgr[8323]: 19EA21827: from= <[email protected]>, size=645, nrcpt=1 (queue active) Apr 10 10:26:29 ######### postfix-local[8331]: postfix-local: [email protected], [email protected], dirname=/var/qmail/mailnames Apr 10 10:26:29 ######### postfix-local[8331]: cannot chdir to mailname dir name: No such file or directory Apr 10 10:26:29 ######### postfix-local[8331]: Unknown user: [email protected] Apr 10 10:26:29 ######### postfix/pipe[8330]: 19EA21827: to=<[email protected]>, relay=plesk_virtual, delay=0.15, delays=0.11/0/0/0.04, dsn=2.0.0, status=sent (delivered via plesk_virtual service) Apr 10 10:26:29 ######### postfix/qmgr[8323]: 19EA21827: removed [email protected] is the name I've declared in php.ini for sendmail_from = "[email protected]" sendmail_path = "/usr/sbin/sendmail -t -f [email protected]" and the recipient is supposed to be [email protected]. Is this an error on my side or the recipients? Can I address this on my server? Many thanks SF.

    Read the article

  • Windows 7 boots to black screen with blinking cursor

    - by murgatroid99
    I have an Alienware M17x that dual boots into Ubuntu 11.04 and Windows 7 Home Premium. Currently, the computer starts at the GRUB loader and will boot into Ubuntu, but if I try to boot into Windows, I immediately get a black screen with a blinking cursor in the upper left corner. The output of fdisk -l is Device Boot Start End Blocks Id System /dev/dm-0p1 1 5 40131 de Dell Utility Partition 1 does not start on physical sector boundary. /dev/dm-0p2 6 1918 15360000 7 HPFS/NTFS Partition 2 does not start on physical sector boundary. /dev/dm-0p3 * 1918 64772 504878877+ 7 HPFS/NTFS Partition 3 does not start on physical sector boundary. /dev/dm-0p4 64772 77827 104858625 5 Extended Partition 4 does not start on physical sector boundary. /dev/dm-0p5 64772 67204 19531008 83 Linux /dev/dm-0p6 67204 74498 58593536 83 Linux /dev/dm-0p7 74498 77577 24731648 83 Linux /dev/dm-0p8 77578 77827 2000128 82 Linux swap / Solaris I have used the Windows rescue CD, and run the automatic error fixer until it finds no errors. I have run chkdsk /R on both the main Windows 7 (/dev/dm-0p3) partition and the recovery partition (/dev/dm-0p2). I set the main Windows 7 partition to be active. I also tried running in the recovery console the commands bootrec /fixmbr bootrec /fixboot bootrec /rebuildbcd None of these helped and the last set of commands deletes grub, which I then have to reinstall from Ubuntu. I think the last thing I did in windows before this started was install the newest ATI driver for my video card. This would suggest using system restore, and I actually had a restore point earlier (after the problem started), but after whatever I did that restore point does not appear in the list on the recovery disk any more, so I cannot do a system restore. Is there anything else I can try to make Windows boot properly again? Edit: Running the suggested commands bootsect /nt60 c: bcdboot c:\windows /s c: was also ineffective.

    Read the article

  • Intell SSD + Win 7 after crash can not repair, can not re install

    - by Ori
    I have Lenovo w520, after i bought it i took away old hhd (no longer with me) and replaced it with intel ssd, it worked perfectly for 1 year or so, today my system fr0ze and after waiting for some time i didi hard reset - it wasn't able to boot anymore at all, i do not see any messages from windows ever, it only loads Intel boot utility that suggests to pick one of 3 devices to boot, it has my hdd there but nothing happens. /I dont have recovery tools from lenovo since i moved to another country, i got win 7 cd from a friend (came with his laptop) abd if in bios i have AHCI - it doesnt see my ssd, if compatible mode - it sees it but format not available, partition creation gives b\me 8007045 error. I tried diskpart, in compatible mode it sees my disk but doesnt do recover or clean all, also win 7 disk tools dont do anything if i try to do boot fix... I am ok with erasing it but i seem not to be able too, i jus tneed the machine to wpork asap, all my files are on external drives so i dont care about formatting. please help! I am given a very old machine by a friend so i am able to browse internet... it is under XP...

    Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >