Search Results

Search found 3112 results on 125 pages for 'daylight saving'.

Page 89/125 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• My Linux desktop sees my HDMI-connected monitor, but my monitor says "No signal"

  - by hrunting

  I have a Gigabyte H55M-UD2H motherboard and an Acer S271HL monitor. When I connect the monitor to the motherboard via VGA, signal works perfectly. When I connect the monitor via HDMI, the system "sees" the connection, but the monitor receives no signal (the monitor shows a blue box which reads "No Signal" and then the monitor goes into power-saving state). Some fun facts about this: if I hook a different monitor to this box via HDMI, the monitor receives the output without issue (same computer/motherboard, same cable, different monitor) if I connect a different computer to the monitor via HDMI, the monitor receives the output without issue (different computer, same cable, same monitor) no signal is received whether in the OS or in the BIOS there are no BIOS options for controlling video output other than for selection of onboard vs. PCI/PCI-E-based video card (the system has no dedicated video card installed) The box is running Linux, so I have the output of xrandr which shows the connection and the monitor modes detected via DDC: ~$ xrandr --prop Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on HDMI2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 598mm x 336mm EDID: 00ffffffffffff000472ca028d128022 1c160103803c2278ca7b45a4554aa227 0b5054bfef80714f8140818081c08100 9500b300d1c0023a801871382d40582c 450056502100001e000000fd00384c1f 5311000a202020202020000000fc0053 323731484c0a202020202020000000ff 004c55573044303130383531300a01e5 020324f14f0102030405060790111213 1415161f230907078301000067030c00 1000382d023a801871382d40582c4500 56502100001f011d8018711c1620582c 250056502100009f011d007251d01e20 6e28550056502100001e8c0ad08a20e0 2d10103e960056502100001800000000 000000000000000000000000000000de Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 HDMI3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP2 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on How do I get this monitor to recognize the output from this HDMI socket?

  Read the article

• SATA HDD stuttering on reads (LED on)

  - by jdehaan

  I hope I can get some new ideas to solve the issue. What I have: AMD Phenom II X4 905e Box, Sockel AM3 Gigabyte GA-MA790XTA-UD4, AMD 790X, AM3 ATX WD Caviar GreenPower 1,5TB SATA II 4GB Kit OCZ DDR3 PC3-10666 Platinum Low-Voltage CL7 HIS HD 4670 iSilence4 DDR3 1024MB Native HDMI Dual-DVI, PCI-Express Behavior: Everything works normally excepting the HDD accesses. The drive seems to get stuck in reading data (LED drive by Mainboard is on for a while) then recovers and goes on. There is a delay of more than 30s sometimes. Often it is a matter of 5-10s. This does not seem related to the workload of the disk. What I tried so far: Use different SATA port: I switched from the SATA3 to SATA2 then the SATA driven by the CPU, no difference. Turned AHCI off, drove the SATA in IDE mode, same behavior, now I felt like the HDD has problems Deactivated energy saving settings (BeQuiet, ...), disabled 3 CPUs (msconfig) supposing some race condition or trouble with changing freqs, same trouble With Windows7 Professional 64Bit, I installed the hotfix http://support.microsoft.com/?scid=kb%3Ben-us%3B976418&x=8&y=9 with no success. The problem description matches what I experienced, so I felt lucky but was quite in a sad mood after being deceived. Burned the DLG 5.04f DataLifeGuard CD from WD to check the drive. All tests passed, to my surprise! Installed an Ubuntu on the same drive i386 flavour. Drive still in IDE mode, exactly the same behavior. So the OS does not matter. What I did not try yet: http://www.gigabyte.eu/Support/Motherboard/BIOS_Model.aspx?ProductID=3263 I have a F2 BIOS and there is a F3a Beta, did someone have similar issues that were solved by this update? It is a beta so I fear upgrading a bit and I could find no release notes at all on the net, not really serious work maybe they had issues translating from Chinese??? Using another HDD drive Does someone have other hints or a similar issue? Maybe it is neither the HDD nor the Mainboard/BIOS?

  Read the article

• Hard drive had reallocated sectors...but now it magically doesn't! Can I trust it?

  - by rob

  Last week my SMART diagnostics utility, CrystalDiskInfo, reported that the external hard drive that I was saving my backups to had suddenly reported 900+ reallocated sectors. I double-checked to confirm, then ordered a replacement drive. I spent all of this week copying data from that drive to the new drive. But toward the end of the copy, something peculiar happened. CrystalDiskInfo popped up an alert that the reallocated sector count had gone back down to 0. I know that when SMART detects a read error on a block, it adds that block to the current pending reallocation list. If it subsequently is successfully written or read later, it is removed from the list and assumed to be fine, but if a subsequent write fails, it is marked bad and added to the reallocated sector count. What concerns me most is that I've never read anywhere that a sector can be recovered as "good" after it has been marked as a bad sector and remapped. I've just finished running an extended SMART diagnostic, and it found no surface errors. Now I'm doubtful that the manufacturer will honor a warranty claim if the SMART info does not report any problems. Has anyone had this happen? If so, then is the drive, indeed, okay, or should I be concerned about an imminent failure?

  Read the article

• Acer LCD says "no signal"

  - by Ken

  I have an Acer 24" LCD (model "AL2423WDR") that's about 3 years old. It worked perfectly for most of its lifetime so far. Recently it started giving problems. When I turn it on, it either says "no signal" on the display, or the power light goes yellow (as if in power-saving mode). This happens with both DVI and VGA (both of which worked fine before), and stranger still, the 4 buttons on the front, for accessing the on-screen menus, don't do anything. I've also tried different computer hardware and software (PC/Mac, Linux/MacOS), but nothing has worked. I've tried power-cycling it (with both the power button and the power switch), and also unplugging it entirely. The nonworking buttons suggest to me an issue with the firmware. I found a place on Acer's website that says I can send it in to have it fixed, at my expense, but I'll avoid that if I can. Is there a way to fully reset it manually? Or is there something else I can try?

  Read the article

• PowerPoint save group as picture creates asymmetric edge, how to fix?

  - by Se Norm

  I created tons of figures for my thesis in PowerPoint and now I realized that when I try to save the grouped items (= one figure) as a picture (EMF), it somehow asymmetrically adds a border on the left and the bottom. First one is original group, second is the same pasted as a picture. Original group: Pasted as a picture: Does anyone have an idea how to fix that for a huge number of figures? I think it only started happening when I used a page size of 1m x 1m in PowerPoint to be able to zoom in more for some figures. However, I cannot not simply change the page size now as it messes up font and object sizes. Also, copying it into a smaller page and then saving as EMF doesn't do the trick. Maybe it is not related to the page size after all. Cropping every figure individually would be a lot of work, so I hope there is a different solution. I found the origin of the problem: the text label in the left bottom corner of each image (0s, 8s, 16s). I still do not understand why it is happening though, since the text label does not expand over the edge of the image (it was aligned using the align left function). It would still be great if there was an easy way to fix this, especially as I want to keep the text where it is.

  Read the article

• Windows XP laptop doesn't appear in WSUS All computers list

  - by George

  I have this one laptop that doesn't appear in WSUS all computers list. We have about 23-25 PCs/laptops/servers in the network, all, but one are listed in WSUS. This is what I have done so far: 1) Changing Updates on local PC: Go to your Windows XP client and start a new Microsoft Management Console (MMC). At Start, Run, type MMC. Use Ctrl+M to add a new snap-in. Click Add, and then add the Group Policy Object Editor for the Local Computer. Click Close, and then click OK. Expand the Local Computer Policy. Under Computer Configuration, go to Administrative Templates, Windows Components, Windows Update. In the right-hand pane, double-click Specify intranet Microsoft update service location. Configure the settings to reflect my WSUS server. Click OK and then close the MMC without saving it. executed wuauclt.exe /detectnow 2) Edited registry key to be pushed to the PCs using GPO [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate] "WUServer"=http://wsusserver "TargetGroupEnabled"=dword:00000001 "TargetGroup"="WINXP" "WUStatusServer"=http://wsuswerver 3) executed wuauclt /resetauthorization /detectnow 4)Synchronised and refreshed the group I am running out of ideas here. The client is running Windows XP pro, WSUS version is 3.0 and is running on Windows 2008 R2 64-bit. Please, help! Thanks! EDIT 13.IX.2012 @ 15.40 I should have also mentioned that we do have a Windows Update GPO for workstations group and that laptop is a part of that group.

  Read the article

• Alternatives to using email (in particular, Outlook) as a knowledge store?

  - by Umber Ferrule

  I suspect that, like many people, I use my work email account (accessed via Outlook 2007) to store information. I generally try to group similar things in folders and sub-folders, but with a multitude of folders this gets very unwieldy. In particular, it can be a bind to locate things using Outlook's tree structure. (As an aside: I've yet to come across a good free search add-on for Outlook.) I realise Outlook is not the best place to store all my information and I'd prefer not to. In an ideal world I'd like to be able to organise all of the information stored in Outlook in a MindMap (my software of choice being Freemind) or Wiki. To maintain an email audit-trail, I've considered saving individual emails as files using a MindMap or Wiki to link them. What do people think of this? (I can't say I relish the thought of the exporting process!) Whatever I do is going to involve some pain (i.e. setting up a Wiki/MindMap) or sticking with what Outlook provides currently. Has anyone been in the same position? Has anyone mass-migrated information from Outlook? If so, what was the best way? Any ideas or alternative proposals?

  Read the article

• BackupPC - why does it use rsync --sender --server ... ?

  - by Jakobud

  I'm in the process of experimenting with BackupPC on a CentOS 5.5 server. I have everything pretty much setup with default values. I tried setting up a basic backup for a host's /www directory. The backup fails with the following errors: full backup started for directory /www Running: /usr/bin/ssh -q -x -l root target /usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/ Xfer PIDs are now 30395 Read EOF: Connection reset by peer Tried again: got 0 bytes Done: 0 files, 0 bytes Got fatal error during xfer (Unable to read 4 bytes) Backup aborted (Unable to read 4 bytes) Not saving this as a partial backup since it has fewer files than the prior one (got 0 and 0 files versus 0) First of all, yes I have my ssh keys setup to allow me to ssh to the target server without requiring a password. In the process of troubleshooting, I tried the above ssh command directly from the command line, and it hangs. Looking at the end of the debug messages for SSH I get: debug1: Sending subsystem: /usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/ Request for subsystem '/usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/' failed on channel 0 Next I started looking at the rsync flags. I did not recognize --server and --sender. Looking at the rsync man pages, sure enough, I don't see anything about --server or --sender in there. What are those in there for? Looking at the BackupPC config I have this: RsyncClientPath = /usr/bin/rsync RsyncClientCmd = $sshPath -q -x -l root $host $rsyncPath $argList+ And for the arguments, I have the following listed: --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive Notice there is no --server, --sender or --ignore-times. Why are these things getting added in? Is this part of the problem?

  Read the article

• Outlook 2007 - Right Click Email > Move To {Folder Name}

  - by HK1

  I know it seems like an elementary question. What's the simplest and fastest way to move a read/completed email to a different folder in Outlook 2007 (connected to Exchange 2007)? I have a particular user that is challenged by technology. Using keyboard shortcuts is not an option. Dragging and dropping things - forget it. And too many clicks is frustrating to him. He keeps his email inbox completely clean (OCD=True) but he does that by deleting every single email as quickly as he's done with it. If an email can't be resolved in a day or two it almost drives him to insanity. As far as he's concerned, there's only one right thing to do with an email - reply to it and then delete it. He's being asked to save emails unless they are clearly trash. I'm trying to figure out what the simplest method is to move an email to a "Saved Emails" or "Archived" folder (don't confuse "folder" with .PST file, that's irrelevant for this discussion). I envisioned that I could possibly hi-jack every delete and put the email in his Saved folder. But I don't like this option because some emails are truly trash and I don't want him saving those. What I'd really like to do is something like this: Right Click Email in List > Move To {Folder Name} Is there a simple way to do this? Maybe someone has another suggestion on how to handle this situation.

  Read the article

• mod_cache not working

  - by Pistos

  I have a PHP site that has many dynamically generated pages. I'm trying to turn to mod_cache to help boost performance, because in most cases, content does not change in a given day. I have configured mod_cache as best I could, following examples around the web, including the mod_cache page on apache.org. When I set LogLevel debug, I see a bit of information about the caching that is [not] happening. There are plenty of pairs of lines like this: [Fri Jun 01 17:28:18 2012] [debug] mod_cache.c(141): Adding CACHE_SAVE filter for /foo/bar [Fri Jun 01 17:28:18 2012] [debug] mod_cache.c(148): Adding CACHE_REMOVE_URL filter for /foo/bar Which is fine, because I've set CacheEnable disk /foo, to indicate that I want everything under /foo cached. I'm new to mod_cache, but my understanding about these lines is that it just means that mod_cache has acknowledged that the URL is supposed to be cached, but there are supposed to be more lines indicating that it is saving the data to cache, and then later retrieving them on subsequent hits to the same URL. I can hit the same URL till I'm blue in the face, whether with F5 refreshing, or not, or with different browsers, or different computers. It's always that pair of lines that shows in the logs, and nothing else. When I set CacheEnable disk /, then I see more activity. But I don't want to cache the entire site, and there are many, many different subpaths to the site, so I don't want to have to modify code to set no-cache headers in all the necessary places. I'll mention that mod_rewrite is in use here, rewriting /foo/bar to something like index.php?baz=/foo/bar, but my understanding is that mod_cache uses the pre-rewrite URL, not the post-rewrite URL. As far as I can tell, I have the response headers not getting in the way of caching. Here's an example from one hit: Cache-Control:must-revalidate, max-age=3600 Connection:Keep-Alive Content-Encoding:gzip Content-Length:16790 Content-Type:text/html Date:Fri, 01 Jun 2012 21:43:09 GMT Expires:Fri, 1 Jun 2012 18:43:09 -0400 Keep-Alive:timeout=15, max=100 Pragma: Server:Apache Vary:Accept-Encoding mod_cache config is as follows: CacheRoot /var/cache/apache2/ CacheDirLevels 3 CacheDirLength 2 CacheEnable disk /foo What is getting in the way of mod_cache doing its job of caching?

  Read the article

• How to run the CPU at something like 75%?

  - by Tobias Kienzler

  My notebook is too old for me to invest into a new fan (it will simply be replaced by a new one when the final heat death occurs), but when it runs on full speed I feel like sitting in front of a vacuum cleaner with integrated cooking... I'm currently using NHC, the Max Battery mode of which let's the CPU run at 50% (~800 MHz). That's fine for most applications, and both temperature and noise remain low. However, on some occasions I need a bit more speed, more around 75% maybe. Can I set the power saving settings somehow so that the CPU won't surpass 75% of it's capability so that an acceptable compromise between power and noise is achieved? I can't set the CPU frequency in the BIOS and since on rare occasions I'd like to be able to switch to 100% without much hassling, hardware solutions like setting jumpers are no option. This answer to a similar (linux!) question mentions NHC should be able to offer these options, but for me they are all greyed out: The notebook is an Asus Z9200K, I guess NHC doesn't support its chipset enough for these advanced options.

  Read the article

• Photoshop CS6 Corrupted File recovery

  - by Ben Franchuk

  Last night I was working on a client application mock-up in photoshop, but was goin to take a break from my work so I saved the .PSD file on my internal HDD and put my computer into stand-by mode once the file had finished saving. Unfortunately my computer crashed while it was entering stand-by and shut itself down (photoshop was still open). I did not boot it again to make sure all my files were ok because they had already been saved, but today once I opened up the file again it was extremely corrupted and also completely un-editable (screenshot bellow). so what im asking is there any way to recover my work, or at least some of it? i have put in a good few days work on this project and would hate to have to restart it. the size of the file is 3070 KB, even though it reads as 712 KB in photoshop. i dont know if these file sizes are larger or either smaller than the original non-corrupted file's size, but considering all the layers in the file i suspect it was larger before it corrupted. im using windows XP professional 32bit SP3. both my OS and said .PSD file are located on the same internal HDD (74.4 GB). i do have an external HDD (1.5 TB) but i primarily only use it for movies music and tv shows. i dont know if it was plugged in t the time of me editing the document last, though, if it means anything. i have tried many image and PSd recovery softwares but none have returned any results that may help recover my work. edit: i tried using a photo reccovery software (odboso Photorecovery) that actually seems to recover the corrupted file in question judging by the size of the file, but i cannot recover it because of the licence fee. knowing that the file is still likely on my HDD, what location might it be located?

  Read the article

• Some HTTPS connections via NAT fail, but work on firewall itself.

  - by hnxn

  Hi, I am having trouble establishing some HTTPS connections from internal machines, even though these same connections work if initiated on the firewall itself. The firewall machine is running Ubuntu 10.04.1 and shorewall 4.4.6. The internet connection is Bell PPPoE DSL (in Canada). I have tried various MTU settings, it doesn't seem to make any difference. Other protocols (HTTP, FTP, etc) generally work. The problem seems to be limited to certain sites; this one never works from an internal machine, but always works from the firewall itself: From internal machine: $ wget https://images.fedex.com/images/ascend/shared/headers/nxgen/corp_logo.gif --2011-01-13 20:51:31-- https://images.fedex.com/images/ascend/shared/headers/nxgen/corp_logo.gif Resolving images.fedex.com... 184.24.96.69 Connecting to images.fedex.com|184.24.96.69|:443... connected. ^C From firewall: $ wget https://images.fedex.com/images/ascend/shared/headers/nxgen/corp_logo.gif --2011-01-13 20:58:28-- https://images.fedex.com/images/ascend/shared/headers/nxgen/corp_logo.gif Resolving images.fedex.com... 184.24.96.69 Connecting to images.fedex.com|184.24.96.69|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 840 [image/gif] Saving to: `corp_logo.gif' 2011-01-13 20:58:28 (149 MB/s) - `corp_logo.gif' saved [840/840] This URL always works from both internal and firewall: https://encrypted.google.com/images/logos/ssl_logo_lg.gif Any troubleshooting tips would be greatly appreciated!

  Read the article

• Dell XPS 17 Laptop USB SS Ports don't work until machine rebooted

  - by Matt

  I have a new Dell XPS 17 laptop and have an issue that the two USB SS ports on the rear of the machine are not recognising anything when I start-up. Have tried mouse, keyboard, headset, USB display. If I plug a USB hub in the power light on the hub lights (presume this is hard-wired) but a mouse plugged into the hub does not light up. If I restart the pc the ports work fine. Also the other two USB ports work fine all the time. I have switched off the power saving setting on the device manager (Power managementAllow the computer to turn off this device to save power) and also in the advanced power settings (USB Settings USB Selective suspend setting:disabled) I have also disabled USB powershare in the BIOS (not sure what this actually does!) This is becoming very annoying having to restart the machine every day before I can start work Running Win 7 Pro x64 EDIT: I have found that setting USB Emulation to Disabled has helped the devices to be recognised during start up but they keep dropping out completely when in use EDIT 2: I contacted Dell about this issue who told me to update the BIOS driver, when I asked if I should downgrade from the factory installed A13 to the A12 posted on the dell website they said no. However there is now an A14 available on the website has anyone tried this?

  Read the article

• tod to avi mpg wmv, convert tod (.mpeg-2) to avi mpg wmv for Movie Maker.

  - by yearofhao

  Need to convert .tod (mpeg-2) to avi mpg wmv download from JVC Everio to PC with tod to avi mpg wmv converter convert tod to uncompressed/raw avi, mpg wmv Have a JVC Everio camcorder? Then you may encounter problems when saving the .tod files to your computer windows movie maker says it can't recognize and edit them to make videos. You may play them using media player but the problem is how to edit them? The bundled software Power cinema could be annoying, since you can only edit when the camera is plugged in to the PC - Power cinema can’t seem to edit from the saved clips alone. So, how do you save them to PC so that you can edit them without the camera and also using windows movie maker? JVC Everio Tod to avi mpg wmv converter costs you a penny to but help you perfectly convert tod file to AVI, MPG, WMV, YouTube FLV, MP4, DV, QuickTime.MOV or other common video formats with fast speed and while keeping the original HD quality. High definition TOD recordings from JVC Camcorders can playback fluidly, convert smoothly and edit professionally on with iOrgsoft TOD file converter iOrgsoft tod to avi mpg wmv Converter has been mostly used by Windows users who use Windows 7 or Vista, after the .tod (mpeg-2 the same codec) downloaded from JVC Everio to PC, it’s best to convert tod to avi, convert to xvid divx, convert tod to uncompressed avi or convert tod to raw avi, tod to mpg, tod to wmv, which are three Windows movie maker best formats to import. TOD to avi mpg wmv converter is a competent video-editing program that allows you to clip/cut TOD video clip, crop the video to encode, and help transfers video to devices like iPhone, iPod, to HDTV connected with Apple TV.

  Read the article

• Improving browser performance while using lots of tabs?

  - by Andrew

  My browsing habits cause me to open lots of windows and tabs, either related to different projects I'm working on or things I may want to read later. I use OSX and use about 5 spaces with multiple windows in each space. The problem is eventually I'll have around 200 or more tabs open (spread over 15-20 windows) that I don't want to close. Needless to say, my computer's performance starts to degrade. As I write this on my mobile, Safari on my laptop is locking up the computer. I used to use Chrome but found better performance with Safari. What I'd like to know, is there a graph of browser performance based on tab usage? I don't need a browser that keeps all tabs active. It would be great if the browser could increase performance by "putting tabs to sleep". Or if there was some sort of tool for saving a "workspace" of tabs that you could reactivate the next time you are working on that project. What sort of solution can you recommend to solve this problem?

  Read the article

• wget is working only when used with sudo

  - by Yusuf

  I'm having quite a strange behavior with wget since yesterday. I can download files by using sudo wget, but when I try the same file with only wget, I can get this error: yusufh@ubuntu-yuh:~$ wget http://www.kegel.com/wine/winetricks --2010-12-17 09:34:11-- http://www.kegel.com/wine/winetricks Resolving www.kegel.com... failed: Name or service not known. wget: unable to resolve host address `www.kegel.com' and with sudo wget: yusufh@ubuntu-yuh:~$ sudo wget http://www.kegel.com/wine/winetricks --2010-12-17 09:35:37-- http://www.kegel.com/wine/winetricks Connecting to 127.0.0.1:5865... connected. Proxy request sent, awaiting response... 200 OK Length: 190672 (186K) [text/plain] Saving to: `winetricks' 100%[==================================================================================================>] 190,672 --.-K/s in 0.03s 2010-12-17 09:35:37 (6.92 MB/s) - `winetricks' saved [190672/190672] After the comments below, here is an update: I can use Google Chrome or Firefox perfectly without running it as root. I use ntlmaps to connect to the office proxy. So I need to use 127.0.0.1:5865 as the proxy for clients. Result for env | grep -i proxy: NO_PROXY=localhost,127.0.0.0/8,*.local, http_proxy=127.0.0.1:5865 ftp_proxy=127.0.0.1:5865 all_proxy=socks://127.0.0.1:5865/ ALL_PROXY=socks://127.0.0.1:5865/ https_proxy=127.0.0.1:5865 no_proxy=localhost,127.0.0.0/8,*.local while sudo env | grep -i proxy is empty! HELP!

  Read the article

• Office 2010 Trusted Locations not working after restart

  - by Josh King

  In Excel 2010, on Windows XP, I am unable to open files - through the open dialog box - from a network drive. The sever has already been added to the Trusted Locations and now most security settings turned down or off. Excel will show "Downloading ..." on that status bar and a progress bar which doesn't progress. We have left Excel sitting in this state for 30+ minutes and no change. A similar problem occurs when saving files to network shares. If we use explorer to navigate to the files and double click them they open flawlessly. No add-ins are active. We also have this problem in Word 2010, but the server was not initially in the Trusted Locations. I added it and it worked until the PC was reset, it now exhibits the same issues as Excel where the server is in the Trusted locations but will not open files. I have tried removing the server from the Trusted Location in both applications, restarting the PC and re-adding them (testing before, after and in-between) and had no luck.

  Read the article

• wget hangs in http request sent awaiting response in some sites

  - by gkr

  Using Ubuntu 12.04. wget hangs in http request sent, awaiting response... in some sites. Browser's are not opening sites that are failed in wget. But in WinXP everything works. This works gkr@gkr-desktop:~/Documents/curl$ wget google.com --2012-06-12 21:29:37-- http://google.com/ Resolving google.com (google.com)... 74.125.236.174, 74.125.236.160, 74.125.236.161, ... Connecting to google.com (google.com)|74.125.236.174|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: http://www.google.com/ [following] --2012-06-12 21:29:38-- http://www.google.com/ Resolving www.google.com (www.google.com)... 74.125.236.179, 74.125.236.180, 74.125.236.176, ... Connecting to www.google.com (www.google.com)|74.125.236.179|:80... connected. HTTP request sent, awaiting response... 302 Found Location: http://www.google.co.in/ [following] --2012-06-12 21:29:38-- http://www.google.co.in/ Resolving www.google.co.in (www.google.co.in)... 74.125.236.184, 74.125.236.191, 74.125.236.183, ... Connecting to www.google.co.in (www.google.co.in)|74.125.236.184|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `index.html.3' [ ] 13,383 --.-K/s in 0.04s 2012-06-12 21:29:39 (308 KB/s) - `index.html.3' saved [13383] gkr@gkr-desktop:~/Documents/curl$ This site just stops/hangs in awaiting response. gkr@gkr-desktop:~/Documents/curl$ wget grooveshark.com --2012-06-12 21:27:29-- http://grooveshark.com/ Resolving grooveshark.com (grooveshark.com)... 8.20.213.76 Connecting to grooveshark.com (grooveshark.com)|8.20.213.76|:80... connected. HTTP request sent, awaiting response... ^C gkr@gkr-desktop:~/Documents/curl$ Thanks

  Read the article

• DNS issue on Fedora 12? wget wordpress.org fails where wget www.google.com works

  - by Tom Auger

  I'm administering a Fedora 12 box, but am quite new to networking specifics. Recently one of our WordPress apps hosted on our server has stopped being able to perform its auto-update or auto-download of plugins. Investigating further, I have tried the following: $ wget wordpress.org --2010-12-17 11:26:50-- http://wordpress.org/ Resolving wordpress.org... failed: Temporary failure in name resolution. wget: unable to resolve host address âwordpress.orgâ Whereas: $ wget www.google.com --2010-12-17 11:27:26-- http://www.google.com/ Resolving www.google.com... 74.125.226.82, 74.125.226.84, 74.125.226.80, ... Connecting to www.google.com|74.125.226.82|:80... connected. HTTP request sent, awaiting response... 302 Found Location: http://www.google.ca/ [following] --2010-12-17 11:27:26-- http://www.google.ca/ Resolving www.google.ca... 173.194.32.104 Connecting to www.google.ca|173.194.32.104|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: âindex.html.4â [ <=> ] 9,079 --.-K/s in 0.02s 2010-12-17 11:27:26 (462 KB/s) - âindex.html.4â Interestingly: $ ping wordpress.org PING wordpress.org (72.233.56.138) 56(84) bytes of data. 64 bytes from wordpress.org (72.233.56.138): icmp_seq=1 ttl=50 time=81.5 ms 64 bytes from wordpress.org (72.233.56.138): icmp_seq=2 ttl=50 time=67.3 ms ^C --- wordpress.org ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1783ms rtt min/avg/max/mdev = 67.361/74.448/81.536/7.092 ms and $ nslookup wordpress.org Server: 192.168.2.1 Address: 192.168.2.1#53 Non-authoritative answer: Name: wordpress.org Address: 72.233.56.138 Name: wordpress.org Address: 72.233.56.139 nscd has been stopped and flushed. iptables appear to be clean. At this point I have exhausted my limited abilities to diagnose the issue. Can anyone suggest a resolution path?

  Read the article

• Router block some sites

  - by Mahesha999

  Hi I was using ADSL Modem/Router earlier. The device is quite old Pronet PN-ADSL 101 E/U model (pics: http://bit.ly/P2YaWy, http://bit.ly/OA700l) Since it had only one RJ45 out, I bought new Wireless Router TPLink TL-WR941ND. It has 4 RJ45 out and 3 wireless antennas. I configured my old router in bridge. Now, if I have to connect my pc to Internet through the old router, I have to enter username and password. Then I connected the RJ45 output of old router to the WAN in of new router. and ran the CD of new router. It configured the new router in PPPoE by saving the username and password in router to dial automatically. So now I have to just plug in the wires in my new routers any RJ45 out. I am able to access the Internet when I connect through new router (both wired and wirelessly), but some sites are getting blocked. Most notably yahoo.com (though ymail.com is working), Microsoft.com. msn.com. These sites work perfectly fine when I connect my pc directly to my old router and enter username and password manually. (However others like google.com. facebook.com works fine when connect through new router) So here these some sites need some parameter set but I am unable to find them out. Can anyone help me. My friend said he also faced same problem. Surprisingly he advised me to see if the same websites will work through Opera turbo mode and boom they worked. So what could be the problem?

  Read the article

• What was your biggest waste of money, and what should you have bought instead? [closed]

  - by rob

  I waste a lot of money on computer equipment and other electronics that I don't really need. I've also bought software that I've never really used, or which as been replaced by better free software. As I'm buying things, it doesn't seem like much--fifty bucks here, a hundred dollars there. But when I go back and look at how much I've spent over my past few electronics purchases, I usually start to think of the other things I could have bought with that money instead. Most of the computer hardware and electronics don't usually improve my life by much, if at all. Case in point: back when I was in college, I prided myself on getting the best deals for computer hardware, but when I went back and added up all the money I had spent, I had probably wasted close to a thousand dollars on "cheap" $100 hard drives that eventually all went bad (including the warranty replacements). Even if they did still work, it would not be worth the effort to use them, because they're too small and too noisy by today's standards. I've also spent thousands more on other junk, such as RAM and CPU upgrades that only gave modest performance jumps, and wireless audio transmitters that I used for a short time to stream music from the now-defunct Yahoo! Music service. Every time I see a really great deal on RAM or video cards, I come one click away from buying them, but these days I'm usually able to resist. I've been wanting to get into woodworking ever since I moved into my house, and five years later I'm finally saving up for a $600 table saw. Sure, I've already got a toolbox and a couple of the essential power tools like a drill and a jigsaw, but I can't help but think that I'd have an entire shop full of woodworking tools and a lot of nice wood furniture if I hadn't wasted all that money back in college. What has been your biggest waste of money on computer stuff and technology? If you had all that money back, would you make the same mistake again and buy the same types of things, or would you spend it on something else?

  Read the article

• Best video codec to store my own collection

  - by Jack

  Hello! I think this question has already been asked but with different flavours. My problem resised in the fact that my camera (Canon G9) creates video with almost raw codec (I think it's plain old MPEG) so a 10 minutes video is almost 900mb. I would like to convert them in a format that has a good trade-off between space and quality, but I would prefer having the quality as good as the original (of course this is not possible because of lossy compression) just saving as much space is possible with a minimal lose of quality. Which codec should I look for? H264? It seems to be the champion of the moment.. otherwise which other ones could I try? XviD? Which parameters should I use? I mean how many kbits/s is a fair good bitrate to keep high quality? And what about audio codec? video specs are 640x480 at 30fps or 1024x768 at 15fps.. thanks in advance!

  Read the article

• What are some of the best answer file settings for a WDS Deployment?

  - by drpcken

  I've had my head buried in answer files for days now and have gotten quite comfortable setting them up, test, etc... I use a handful of Components to help my migrations, for my unattend.xml I like: Windows-International-Core-WinPE -- this is good for setting Locales the preboot environment (en-us for us english US speakers). Keeps me from having to set these on the initial image boot. Windows-Setup_neutral -- I like the WindowsDeploymentServices -> ImageSelection, especially if I'm only pushing a single image. This keeps me from having to select it each time. My OOBE_Unattend.xml is really useful and I barely have to touch anything during this part of the installation: Windows-Shell-Setup_neutral -- This lets me put a ProductKey in for my MAK volume license (very useful and time saving). I can also set the TimeZone for the installation. Windows UnattendedJoin_neutral -- I couldn't live without this component. It joins the machine on my domain before logging in as a domain administrator. I would hate to not have this ability. Windows-International-Core -- Again this component really speeds up the OOBE process. I configure my locals and time zone so I don't have to do it by hand when the machine enteres OOBE. Windows-Shell-Setup -- Allows you to configure an autologon when the new machine is finished. I like to logon as a domain admin automatically for customizing and troubleshooting the new machine immediately after it is imaged. Also the OOBE component under here lets me skip the EULA, Hide Wireless Setup, and set my default NetworkLocation. All of this makes the entire OOBE totally automated. What are some other good components I am missing as far as helping me get these images pushed and configured as quickly as possible?

  Read the article

• Including email, IMs, configs, etc. in documentation or notes

  - by Jason Antman

  The shop I work in is pretty laid-back. We're on a documentation kick, only because historically we've been very bad with it. We do a lot of our brainstorming in face-to-face meetings, and also do a lot of communication via IM in addition to email. While I'm usually pretty good about documentation and keeping copious lab notes, I just finished a build of a host and spent hours searching through IMs, emails, files on my workstation, etc. to pull out anything I missed in my lab notes, which formed a large amount of the basis for the internal documentation. Does anyone have any thoughts on, aside from manually saving things to a project directory, managing various data sources (especially email and IM) and tracking them on project basis? Ideally, I'd like an easy way to put copies of emails, IM logs, etc. into a project-specific directory on my workstation and then just have a cron job that syncs that up with a shared folder. This isn't really a candidate for anything more advanced, as the bulk of the data will be copies of configs, code, etc. Here are the big restrictions: Email is via a centralized Zimbra install, so nothing can happen server-side. My workstation is Linux. Aside from writing Pidgin and Thunderbird plugins that let me tag chats and emails as belonging to a project, and then copy them to the appropriate place... any thoughts? Suggestions? Thanks, Jason

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >