Search Results

Search found 13091 results on 524 pages for 'dns servers'.

Page 89/524 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• Host Name Resolution - ISA 2006 - VPN PPTP

  - by Brian Lee Jackson

  We are running an ISA 2006 server and PPTP VPN connection works fine. Clients are able to connect to internet, access Outlook, CRM, etc. The problem we are encountering is that host name resolution is not working. Example, when connected via VPN I can’t ping any box other than the VPN server by the host name. Nslookup also fails. I can ping everything fine via IP address. But for clients, they need to be able to access their “mapped” drives over the VPN which all are mapped by host name. I recently took over this position and it sounds like this used to work. What would be the best place to check first? I haven’t had much exposure to ISA and have been reading up a bit on installation procedures, etc. DNS is hosted and running on our domain controller, as well as WINS. It isn’t on the ISA box. Is there a firewall policy that perhaps got removed? What usually is required for host name resolution to pass through. Any help would be appreciated, thanks!

  Read the article

• Proxy auto-config dnsResolve doesn't seem to resolve subdomains

  - by HorusKol

  We're running on a Windows domain, and have a DNS to control computer names on our intranet. The following PAC works great for basic hostnames on our intranet - but we're setting up some subdomain-like names (example, redesign.buildbox), and it isn't resolving these. These subdomains are resolvable through other means (such as nslookup). Other than checking to see if the host has ".buildbox" or other domain, is there a way to make it work? Maybe I could try appending the Windows domain to host (can you concatenate strings in a PAC)? function FindProxyForURL(url, host) { // If IP address is internal or hostname resolves to internal IP, send direct. var resolved_ip = dnsResolve(host); if (isInNet(resolved_ip, "129.2.2.0", "255.255.255.128")) return "DIRECT"; if (isInNet(resolved_ip, "10.1.1.0", "255.255.255.0")) return "DIRECT"; if (isInNet(resolved_ip, "150.1.2.0", "255.255.255.248")) return "DIRECT"; // All other traffic uses below proxies, in fail-over order. return "PROXY 192.111.222.111:8080; DIRECT"; }

  Read the article

• Unable to connect to second name of Windows 2008 Server R2 machine from XP

  - by Tumba

  I used the command netdom computername /add:newname.domainname.com to add a second name to a server running Windows 2008 Server R2. After restarting the server, I had DNS "A" entries for both names. In addition, the second name was added to HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters\OptionalNames, which I believe should have taken care of any NetBIOS resolution. From my Windows 7 workstation, I can ping both names and running net view on both names reveals the same list of resources. From Windows XP, I can ping both names, but net view only works on the first name. Running net view on the second name returns: System error 52 has occurred. You were not connected because a duplicate name exists on the network. Go to System in Control Panel to change the computer name and try again. What do I need to do to make the second name usable from XP clients? Update: I was able to resolve the problem by adding the REG_DWORD key DisableStrictNameChecking = 1 to HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters, then restarting the Server service. However, I do not understand why this was necessary.

  Read the article

• Not able to access Silverlight.net and ONLY Silverlight.net - All other domains work!

  - by Sootah

  Alrighty folks, I have an extremely odd problem. I am able to surf the web fine with one odd (and really annoying at the moment) exception: Microsoft's Silverlight.net. Every other site that I go to works just fine. This is quite frustrating because I'm in the middle of programming a web app in Silverlight 4.0, and whenever I do a search for any code examples, tutorials, or whatnot at least 50% of the results are hosted in the silverlight.net forums. The error message that I get is: Oops! Google Chrome could not find www.silverlight.net It doesn't work in my other browsers either (both IE and FireFox). What's odd, is that while the error message would lead me to assume it's a DNS error, I can ping the URL just fine. C:\Users\The Doot>ping silverlight.net Reply from 206.72.125.201: bytes=32 time=106ms TTL=106 Reply from 206.72.125.201: bytes=32 time=106ms TTL=106 Reply from 206.72.125.201: bytes=32 time=106ms TTL=106 Reply from 206.72.125.201: bytes=32 time=106ms TTL=106 Ping statistics for 206.72.125.201: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 103ms, Maximum = 110ms, Average = 106ms I've checked my HOSTS file, and there's nothing that refers to ANY Microsoft URL in there. What could be causing this!?? More importantly, how do I fix it? Just for kicks, I've even included the results of a traceroute here for your enjoyment. OS: Windows 7 Ultimate Thanks in advance! -Sootah

  Read the article

• ping incorrectly pinging 127.0.0.1

  - by AlexW

  I've got an odd DNS issue. I'm running a dual ipv4/ipv6 environment on Linux. Pinging some sites results in ping pinging 127.0.0.1. e.g. #> ping authserver.mojang.com PING authserver.mojang.com (127.0.0.1) 56(84) bytes of data. 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.045 ms 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=2 ttl=64 time=0.043 ms 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=3 ttl=64 time=0.058 ms --- authserver.mojang.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2000ms rtt min/avg/max/mdev = 0.043/0.048/0.058/0.010 ms Dig, however correctly returns the following: # dig authserver.mojang.com ; <<>> DiG 9.9.3-P2 <<>> authserver.mojang.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 15800 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 512 ;; QUESTION SECTION: ;authserver.mojang.com. IN A ;; ANSWER SECTION: authserver.mojang.com. 5 IN A 54.235.119.47 ;; Query time: 14 msec ;; SERVER: 2001:4860:4860::8888#53(2001:4860:4860::8888) ;; WHEN: Sat Nov 09 15:34:40 GMT 2013 ;; MSG SIZE rcvd: 66 I'm confused! My web browser returns the correct website, and the same computer booted into Windows also works correctly.

  Read the article

• bind9 - forwarders are not working

  - by Sarp Kaya

  I am experiencing an issue with bind. If i want to resolve any domain name that is on the zone file. It works fine. However, when I try to resolve anything that does not belong to the zone file. I know that actual DNS servers that are being forwarded are working fine. But somehow bind9 fails to use them. The content of /etc/bind/named.conf.options is: options { directory "/var/cache/bind"; forwarders { 131.181.127.32; 131.181.59.48; }; dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; I have also tried to use only one ip address and it still did not work. also the content of /etc/bind/named.conf is: include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones"; So there is no problem with including options file. Any recommendations for fixing this problem?

  Read the article

• How to safely send newsletters on VPS (SMTP) w/ non-hosted domain as "From" email?

  - by Andy M

  Greetings, I'm trying to understand the safest way to use SMTP. I'm considering purchasing a second virtual server mainly for email sending, on which I will set up PHPlist (a free open-source mailing program), so we have the freedom to send unlimited newsletters (...well, 10,000 per day at least, which requires a VPS rather than shared hosting). Here's my current setup with a paid mass-mailing software: I have a website - let's call it MyHostedDomain.org. I send newsletters with the From / Reply To address as [email protected], which isn't being hosting by me but I have access to the email account. Can I more or less safely set this up with an SMTP server on a VPS? i.e. send messages using [email protected] as the visible address, but having it all go through my VPS SMTP? I cannot authenticate it, right? Is this too risky a practice? Is my only hope to use an address with a domain on the VPS, i.e. [email protected]? I already have a Reverse DNS record for the domain hosted on my current VPS. I also see other suggestions, like SenderID and DKIM. But with all these things combined, will this still work? I don't want to get blacklisted, but the good thing is this is a somewhat private list, and users opt-in to subscribe. So it's a self-made audience. (If it makes you feel better, this is related to a non-profit activity, not some marketing scam...it's for a good cause, I assure you!)

  Read the article

• dnsmasq Client TTL

  - by user548971

  I have a situation where my hosts file is constantly changing. Because of this I don't want clients to cache ip addresses resolved using the hosts file. Here is the command that starts dnsmasq for me: /usr/sbin/dnsmasq -K -R -y -Z -b -E -S 8.8.8.8 -l /tmp/dhcp.leases -r /tmp/resolv.conf.auto --stop-dns-rebind --rebind-localhost-ok --dhcp-range=lan,192.168.2.2,192.168.2.249,255.255.255.0,12h -2 eth0 In looking at this site: http://www.thekelleys.org.uk/dnsmasq/docs/dnsmasq-man.html I see that the -T option has this description: -T, --local-ttl=<time> When replying with information from /etc/hosts or the DHCP leases file dnsmasq by default sets the time-to-live field to zero, meaning that the requester should not itself cache the information. This is the correct thing to do in almost all situations. This option allows a time-to-live (in seconds) to be given for these replies. This will reduce the load on the server at the expense of clients using stale data under some circumstances. My command doesn't have the -T option. Do I need it or does dnsmasq default TTL to zero without it?

  Read the article

• How to access XAMPP virtual hosts from iPad on local network?

  - by martin's

  Using XAMPP on one machine. Multiple virtual hosts defined. One per project. Format is .local For example: apple.local microsoft.local client-site.local our-own-internal-site.local All works perfectly from that one machine. I now want to have other systems within the network access the various sites. The main reason for wanting to do this is to be able to test site functionality and layout from mobile devices without having to upload partial work to public servers. I can access the main XAMPP default site by simply entering the IP address of the XAMPP machine in, say, Safari on an iPad. However, there is no way to reach .local that I can see. Would this entail setting up a DNS server within the network? We have a mixture of Windows and Mac machines. No Linux. The XAMPP machine is Vista 64. I don't want real external internet access to be affected in any way, just ".local" pointed to the XAMPP machine if that makes sense.

  Read the article

• My nameserver isn't registered?

  - by jflory7

  My problem is that I am trying to set my domain's nameservers to the nameservers of my dedicated server. My domain is hosted by Namecheap, and everytime I try to input the two nameservers for my private server, one of them is rejected for being unregistered. My dedicated server's control panel is managed through Parallels Plesk 11.5, and the nameservers provided to me are one from the actual provider, OVH (sdns1.ovh.ca), and the other is an actual unique nameserver that points directly to my specific dedicated server. Previously, for another domain I own, I was successfully able to get Namecheap to take the nameserver without an error, so I know this is possible. I know that it works for one of my other domains. After being redirected by Namecheap to contact the server provider, I called OVH and they said it was something I would have to do myself. One interesting detail the OVH representative mentioned was that he saw that my port 53 was closed, which is the port that handles DNS. The only problem is that I have no idea or knowledge as how to open this port back up. So, my final question is how can I get this nameserver working in Namecheap to point to my dedicated server? If you need any more details, feel free to ask for clarification.

  Read the article

• Allow outgoing connections for DNS

  - by Jimmy

  I'm new to IPtables, but I am trying to setup a secure server to host a website and allow SSH. This is what I have so far: #!/bin/sh i=/sbin/iptables # Flush all rules $i -F $i -X # Setup default filter policy $i -P INPUT DROP $i -P OUTPUT DROP $i -P FORWARD DROP # Respond to ping requests $i -A INPUT -p icmp --icmp-type any -j ACCEPT # Force SYN checks $i -A INPUT -p tcp ! --syn -m state --state NEW -j DROP # Drop all fragments $i -A INPUT -f -j DROP # Drop XMAS packets $i -A INPUT -p tcp --tcp-flags ALL ALL -j DROP # Drop NULL packets $i -A INPUT -p tcp --tcp-flags ALL NONE -j DROP # Stateful inspection $i -A INPUT -m state --state NEW -p tcp --dport 22 -j ACCEPT # Allow established connections $i -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow unlimited traffic on loopback $i -A INPUT -i lo -j ACCEPT $i -A OUTPUT -o lo -j ACCEPT # Open nginx $i -A INPUT -p tcp --dport 443 -j ACCEPT $i -A INPUT -p tcp --dport 80 -j ACCEPT # Open SSH $i -A INPUT -p tcp --dport 22 -j ACCEPT However I've locked down my outgoing connections and it means I can't resolve any DNS. How do I allow that? Also, any other feedback is appreciated. James

  Read the article

• sporadic routing to another website when opening a common url

  - by user226098

  I have a strange problem in our office: Sometimes when opening a url from one of our projects random url in any browser not the right website shows up but some other website. In most of the cases it redirects to google.com with some parameters like https://www.google.de/?gfe_rd=cr&ei=krOOU8_kGcSKswadyYDQBw&gws_rd=ssl or just the ugly google 404 page). But today it remains on the origial url but shows up the the content of http://debug.netdna-cdn.com/. This happens about 1 time a week and for no apparent reason. Even stranger it only occurs on a single pc in the network. It now happens on two different computers in the network. Both use windows 8. The problem cannot be fixed by clearing the browser cache but by rebooting the pc or using ipconfig /flushdns. So I think it has something to do with the dns cache of the machine. But I have no idea what the reason is for this and how i can figure out how to solve it. Any ideas?

  Read the article

• Google MAIL not arriving - relay not allowed

  - by renevdkooi

  I have a server with sendmail, hosting my domain mind-zone.nl, i changed the MX records to point to the server. When I use Hotmail or any other client the email arrives and everything is fine. ONLY mail from GMAIL server is bounced and gmail returns "relay denied". I have set all the virtual server host settings etc, from command line I can send mails as well, hotmail works, etc. Just not gmail. The strange thing is, this is what gmail returns: Look at the lower part: "Received by" it returns some IP address which is not mine and has absolutely nothing with my domain. While when I do a NSLOOKUP and change to google's DNS server it will state that the IP Address for my domain is correctly pointing at my server. Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 5.7.1: Relay access denied (state 14). ----- Original message ----- MIME-Version: 1.0 Received: by 10.14.37.138 with SMTP id y10mr3421504eea.43.1297665573901; Sun, 13 Feb 2011 22:39:33 -0800 (PST) Received: by 10.14.29.75 with HTTP; Sun, 13 Feb 2011 22:39:33 -0800 (PST)

  Read the article

• rDNS for SMTP server locally with Mail hosted by third party

  - by Zleviticus

  Ok We have a difference of opinion on something and wanted to get some expert advice. We host our mail with our main domain "OurDomain.net" with a third part mail provider. We have an in house application that has to be able to send mail out to our clients. The problem is that sometimes the mail is flaky and will stop users from functioning in the program for 30 sec or more and appears to lock up. We have determined that the issue is with the mail piece. One solution is to use Database mail to queue up outbound emails to send out. The other is to set up an intenal SMTP server and send out mail through it. My fear is that we wil not be able to get rDNS to work properly and most of the mail will be blocked by our various client spam filters. Is it possible to set up the DNS for the servers so that we can send mail out like [email protected] using the smtp server in house and still pass the rDNS parameters that are normally set on spam filters? enquiring minds want to know.

  Read the article

• iptables rules to allow HTTP traffic to one domain only

  - by Zenet

  I need to configure my machine as to allow HTTP traffic to/from serverfault.com only. All other websites, services ports are not accessible. I came up with these iptables rules: #drop everything iptables -P INPUT DROP iptables -P OUTPUT DROP #Now, allow connection to website serverfault.com on port 80 iptables -A OUTPUT -p tcp -d serverfault.com --dport 80 -j ACCEPT iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT #allow loopback iptables -I INPUT 1 -i lo -j ACCEPT It doesn't work quite well: After I drop everything, and move on to rule 3: iptables -A OUTPUT -p tcp -d serverfault.com --dport 80 -j ACCEPT I get this error: iptables v1.4.4: host/network `serverfault.com' not found Try `iptables -h' or 'iptables --help' for more information. Do you think it is related to DNS? Should I allow it as well? Or should I just put IP addresses in the rules? Do you think what I'm trying to do could be achieved with simpler rules? How? I would appreciate any help or hints on this. Thanks a lot!

  Read the article

• Directory service unavailiable, new hardware same settings

  - by Alex

  I'm working on a project with 2 sites connected by a VPN. Site 1 has the main server and there is a secondary server at site 2 which I am trying to replace. The current setup works perfectly however I can't for the life of me get the replacement server at site 2 up and running. I'm trying to replace like for like just upgraded hardware. I have installed the OS (all Server 2003 Standard SP2) and used exactly the same settings as the old server. I have setup Active Directory, DNS Server, DHCP Server and WINS Server configured. I have used all the same settings as the old server (except IP address and name). I can access the active directory but I can't do anything; add, edit, delete all returns "the directory service is unavaliable". No-one can login on any of the computers on site 2 and the internet is down. Plugging the old server back in and connecting it to the network rectifies the issue (so both new and old are connected at site 2), everyone can login and the internet is back (curious since the modem connects direct to the switch, and even with the new server online I can connect to the router via IP but not the net). I really don't have much experience but I've been roped into doing this because my company is too cheap to hire a real network admin. Any suggestions of where I can start to troubleshoot this, its driving me crazy and I only have a day before all the users are back on site.

  Read the article

• No internet through a web browser but Skype still works

  - by kim3er

  We get our office broadband through a BT Business Broadband WiFi router. We have a mixture of macs and windows PC/laptops connecting to it at any one time. All devices are able to connect to the wireless signal with pretty much full signal. However, only two computers (one windows, one os x) are able to consistently connect to the internet. The other three (one windows, two os x), while they can always connect to the wifi, exhibit one of three characteristics. No internet at all. Programs like Skype work, but no internet through a browser. Internet works, but with intermittent lag when switching between different sites. I'm assuming while trying to resolve different addresses. Ignoring point 1 for moment, my gut is telling me DNS. It is an up to 20MB line that usually gets to between 13MB and 15MB downstream. The router is capable of dealing with the amount of wireless devices that we're throwing at it. Has anyone got any suggestions for how I might further diagnose this problem (preferably in OS X)? Rich

  Read the article

• Some websites hosted on my server cant be reached from some places.

  - by valter

  Hello. I have a bloblem that is causing me headaches to solve. I have a webserver at 100tb.com, running CentOS. I also have these nameservers setted up: 67.213.220.170 ns1.maisturismo.net 67.213.220.171 ns2.maisturismo.net My domain is at Godaddy. I added two Host Summary pointig to the nameserver ips... NS1 to the first IP, and NS2 to the second... Than I changed the nameservers of maisturismo.net to ns1.maisturismo.net and ns2.maisturismo.net http://img20.imageshack.us/i/dnswm.jpg/ Bellow the image showing my dns records to maisturismo.net http://img137.imageshack.us/i/nameservers.jpg/ Its strange... Everythink looks fine, but the webiste is not reachable from [zend2.com][1] proxy, and from some other places, like a friend's house, that dont use the same web provider that I use. I have another nameserver setted up on my server, that have the same problem, All websites that use it cant be reached from zend2.com and from my friends house, except a ".com.br"(Brazillian Domain). Do you have same idea about, what is causing this? I really cant imagine what is the problem... Thanks. [1]: http:// zend2.com

  Read the article

• CNAME vs A records

  - by deb

  I built a small rails app that allow users to make a simple site. It uses subdomain accounts ex: deb.myapp.com Whenever an user wanted to have a domain name associated with their site, they would change their NS records to point to slicehost where the application is hosted and I would manage the DNS records myself. However, as more people are using the application this is not an option for me anymore. I prefer users to keep their nameservers at goddady, register.com, etc, so they can log in and manage their own MX records or whatever else they need to change. My question is, should I have them change the A records to point to my server's ip, or should I have them create a CNAME record? Do they need to delete the default A records to allow the CNAME record to work? Will the A record take precedence and overrule the CNAME record? Thanks in advance. Sorry if this is a very basic question. I've read other posts and I can't find a definite answer.

  Read the article

• Softfail / Failure Notice on SMTP

  - by pascal1954

  Hey, i'm searching for an answer for about 24 hours now and I still can't find any really useful help... The problem appears as the following: I'm running a debian server with Plesk 9.5.3 and qmail. Since a few weeks I'm not able to send mails to some particular servers (like web.de, aol.com). Hence I get failure notices like "Sorry, I wasn't able to establish an SMTP connection." But when I try to send mails to gmail.com - it works! Gmail only reports a softfail in the mail header like so: Received: from h1600XXX.?none? (DOMAIN2.TLD [XX.XXX.XX.XX]) Received-SPF: softfail (google.com: best guess record for domain of transitioning [email protected] does not designate 85.XXX.XX.XX as permitted sender) client-ip=85.XXX.XX.XX This sounds like a dns problem for me, but I can't get an answer for that... What makes me wondering is: h1600XXX is correct, but it should look like h1600XXX.stratoserver.net, not ?none? DOMAIN2.TLD (first line) is different from DOMAIN1 (second line). Both are hosted on this machine, but is this correct? DOMAIN1 is the one I send this mail from. Hopefully someone could help me! If you need more specific information, let me know. Thanks in advance!!! Best regards

  Read the article

• Can't reach only certain websites from my Wifi (with macbook and iphone)

  - by trampj

  I can't access certain websites neither from my macbook nor from my iphone when connected to my Wifi. The same website can be opened from another windows computer connected to the same Wifi. This is what happens when I try to ping it: PING ilpost.it (151.1.175.113): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 ... And when I try to traceroute it: host-001:~ j$ traceroute www.ilpost.it traceroute to ilpost.it (151.1.175.113), 64 hops max, 52 byte packets 1 vodafonedslrouter (192.168.1.1) 2.965 ms 0.743 ms 0.745 ms 2 * 2.96.54.77.rev.vodafone.pt (77.54.96.2) 12.076 ms 10.871 ms 3 77.41.30.213.rev.vodafone.pt (213.30.41.77) 14.145 ms 10.693 ms 11.960 ms 4 85.205.11.49 (85.205.11.49) 9.658 ms 8.946 ms 9.085 ms 5 85.205.13.105 (85.205.13.105) 57.497 ms 57.621 ms 48.080 ms 6 188.111.129.17 (188.111.129.17) 49.483 ms 51.338 ms 48.852 ms 7 85.205.25.174 (85.205.25.174) 47.891 ms 49.219 ms 47.821 ms 8 * * * 9 * * * 10 * * * 11 * * * I've flushed my DNS cache but nothing changed. This is quite dramatic as it seems to depend on 85.205.25.174 hop and don't know how to avoid it. Any suggestions? I add that 3 days ago everything worked fine. Then it has stopped.

  Read the article

• Can't reach only certain websites from my Wifi (with macbook and iphone)

  - by mellin

  I can't access certain websites neither from my macbook nor from my iphone when connected to my Wifi. The same website can be opened from another windows computer connected to the same Wifi. This is what happens when I try to ping it: PING ilpost.it (151.1.175.113): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 ... And when I try to traceroute it: host-001:~ j$ traceroute www.ilpost.it traceroute to ilpost.it (151.1.175.113), 64 hops max, 52 byte packets 1 vodafonedslrouter (192.168.1.1) 2.965 ms 0.743 ms 0.745 ms 2 * 2.96.54.77.rev.vodafone.pt (77.54.96.2) 12.076 ms 10.871 ms 3 77.41.30.213.rev.vodafone.pt (213.30.41.77) 14.145 ms 10.693 ms 11.960 ms 4 85.205.11.49 (85.205.11.49) 9.658 ms 8.946 ms 9.085 ms 5 85.205.13.105 (85.205.13.105) 57.497 ms 57.621 ms 48.080 ms 6 188.111.129.17 (188.111.129.17) 49.483 ms 51.338 ms 48.852 ms 7 85.205.25.174 (85.205.25.174) 47.891 ms 49.219 ms 47.821 ms 8 * * * 9 * * * 10 * * * 11 * * * I've flushed my DNS cache but nothing changed. This is quite dramatic as it seems to depend on 85.205.25.174 hop and don't know how to avoid it. Any suggestions? I add that 3 days ago everything worked fine. Then it has stopped.

  Read the article

• Help - since adding an elastic load balancer to my EC2 web application I cannot connect with the MySQL database (not in AWS)

  - by undefined

  I have a web application that uses an EC2 instance to receive uploaded images, resize and store on S3 and update my MySQL database with the image record. This database is hosted outside Amazon Web Services and so obviously involves communication between the EC2 instance and the database. Images are posted to the upload server from a Flash client which receives the IP address of the upload server when it is loaded and so sends images to 1.12.23.34/resize_script.php This has worked great .. until i started to try and include a load balancer. Since the ELBs do not use an IP address but a DNS address I am now passing this to Flash. Now when I upload images I get the following response from the server - Could not connect to MySQL: Lost connection to MySQL server at 'reading initial communication packet', system error: 111 What might be causing the lost connection to MySQL server. Is there any additional steps I need to take to allow my upload servers to be load balanced? I have set the host property of my MySQL privileges for this user to % any pointers greatly appreciated thanks.

  Read the article

• Restarting postgres DB servers in a master-slave setup

  - by NRS

  Is there any documentation on gracefully restarting servers that have PITR implemented. We have a master-slave setup. I want to make sure servers are rebooted in the correct order so as not to mess up WAL shipping. Should i disable WAL shipping prior to server restart?

  Read the article

• Logging to multiple syslog servers - log4j

  - by Vizek

  Can I send logging information to multiple syslog servers? Our IT department has 2 syslog servers (for redundancy) and wants the application to log to both of them. Is adding 2 lines for syslog host going to work? I guess creating 2 separate syslog appenders (SYSLOG1, SYSLOG2) will work, but wanted to explore this path first.

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >