Search Results

Search found 15168 results on 607 pages for 'enterprise manager 11g'.

Page 89/607 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• Bridging: Loosing WLAN network connection with 4addr on option - Why?

  - by WitchCraft

  Question: For use with my Xen VM, I need to create a virtual network interface (vif) that is bridged to wlan0. If in /etc/network/interfaces I add auto xenbr0 iface xenbr0 inet dhcp And then later do brctl addif xenbr0 wlan0 I get this error message. can't add wlan0 to bridge xenbr0: Operation not supported I found out that Linux won't let you bridge a wireless interface in managed mode at all unless you enable the 4addr option (needed to recompile iw): iw dev wlan0 set 4addr on Afterwards brctl addif xenbr0 wlan0 works, and brctl show shows xenbr0 as bridged to wlan0. Unfortunately, as soon as I execute iw dev wlan0 set 4addr on my entire network connection is gone (no connection). As soon as then I execute iw dev wlan0 set 4addr off I reconnect and it works again. If I re-execute 4addr on, it breaks again, if I execute 4addr off, it works again. Unfortunately, I can't just turn 4addr on, activate the bridge and then turn it back off (error: device not ready). Does anybody know why I loose my connection ?

  Read the article

• SüdLeasing reduziert mit e-Lease auf SOA-Basis Verwaltungskosten um über 1,5 Mio. Euro

  - by franziska.schneider(at)oracle.com

  Mit dem SüdLeasing Projekt e-Lease (electronic leasing process) wurde laut Dr. Buchacker eine maßgeschneiderte, exzellent ausbaufähige „Zukunftsplattform" geschaffen. Die Geschäftsprozesse des Unternehmens wurden gemeinsam mit Oracle und dem langjährigen Oracle Partner PROMATIS auf der neuen Plattform einheitlich abgebildet und verschlankt. Dabei wurden auch bestehende Legacy-Systeme einbezogen. Heute werden auf dieser Oracle basierten service-orientierten Architektur (SOA) die betrieblichen Abläufe automatisiert, optimiert und flexibel weiterentwickelt. Zunächst stand das Finanzdienstleistungsunternehmen vor der Herausforderung unternehmensweit die Durchlaufzeiten, die Kooperation und den Service durch Business Process Streamlining zu verbessern. Neben Einsparungen bei Aktenordnern, Ablagematerialien und bei der Archivierung sollten vor allem die Abteilungen „Markt" und „Marktfolge" mittels einer durchgängigen IT-Unterstützung der Arbeitsabläufe besser ineinander greifen. Parallel dazu beabsichtigte man durch sukzessive Entlastung der Mitarbeiter in den drei Haupt- und Bearbeitungsstandorten sowie in den 19 Vertriebsniederlassungen zusätzliche Kapazitäten zu gewinnen. Bereits kurz nach der Einführung von e-Lease in 2008 hatten sich die Verwaltungskosten in der SüdLeasing Zentrale um rund 1,5 Mio. Euro reduziert. Link zur kompletten Kundenreferenz Oracle und PROMATIS haben mit den im Projekt eingesetzten Oracle Produkten, dem Know-how und Engagement der Berater maßgeblich zum Erfolg von e-Lease beigetragen." - Dr. Ullrich Buchacker, Direktor und Abteilungsleiter IT/Organisation, SüdLeasing GmbH.

  Read the article

• Partial upgrade error

  - by Dan

  this is an issue I have googled a lot and I have tried a lot of fixes, but non of them really worked. At some point (I can't remember when/how) my Update system sort of broke, and since then it is always complaining about "Not all updates can be installed, run a Partial Upgrade". If I click on Partial Upgrade, I get the following result But running apt-get install -f does not fix anything, and at the end I always get the following message Funny thing is that my apt-get system works perfect on Console. I can update my system through apt-get update, apt-get upgrade etc.. So.. how can I fix the graphic interface? I understand that my apt-get system is not broken, but somehow its GUI it is. Any thoughts about it? THANKS! P.D: I have already tried sudo dpkg --configure -a and sudo apt-get autoremove

  Read the article

• ubuntu 12.10 not updating

  - by gunjan parashar

  i have upgrade to ubuntu 12.10 from ubuntu 12.04 after that it is not updating software updater gives the following error : W:Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/Release.gpg Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://extras.ubuntu.com/ubuntu/dists/quantal/Release.gpg Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal/Release.gpg Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal-updates/Release.gpg Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal-backports/Release.gpg Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal-security/Release.gpg Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal-proposed/Release.gpg Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal/restricted/source/Sources Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal/main/source/Sources Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal/multiverse/source/Sources Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal/universe/source/Sources Unable to connect to 10.4.42.15:8080: : W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal-proposed/universe/i18n/Translation-en Unable to connect to 10.4.42.15:8080: E:Some index files failed to download. They have been ignored, or old ones used instead. along with this i am not able to install any thing from software center , it just asks to use this source and after that it just keeps on quering software sources and nothing happens after that plz help me out , this 12.10 has became a great problem for me and forgive for my poor engish

  Read the article

• How to resolve the "Failed to download repository" error?

  - by jojo

  I've tried to update but then I got this error Here's the error information in that box: W:GPG error: http://extras.ubuntu.com precise Release: The following signatures were invalid: BADSIG 16126D3A3E5C1192 Ubuntu Extras Archive Automatic Signing Key <[email protected]>, W:Failed to fetch http://ppa.launchpad.net/unity-team/hud/ubuntu/dists/precise/main/source/Sources 404 Not Found, W:Failed to fetch http://ppa.launchpad.net/unity-team/hud/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found, E:Some index files failed to download. They have been ignored, or old ones used instead. And my Internet connection is working fine. After trying $ sudo apt-get install ppa-purge Reading package lists... Done Building dependency tree Reading state information... Done ppa-purge is already the newest version. The following packages were automatically installed and are no longer required: language-pack-zh-hans language-pack-kde-en language-pack-kde-zh-hans language-pack-kde-en-base kde-l10n-engb kde-l10n-zhcn language-pack-zh-hans-base firefox-locale-zh-hans language-pack-kde-zh-hans-base Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. $ sudo ppa-purge ppa:unity-team/hud Updating packages lists W: GPG error: http://extras.ubuntu.com precise Release: The following signatures were invalid: BADSIG 16126D3A3E5C1192 Ubuntu Extras Archive Automatic Signing Key <[email protected]> W: Failed to fetch http://ppa.launchpad.net/unity-team/hud/ubuntu/dists/precise/main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/unity-team/hud/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead. Warning: apt-get update failed for some reason PPA to be removed: unity-team hud Warning: Could not find package list for PPA: unity-team hud I've tried $ sudo apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 16126D3A3E5C1192 Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.v6Ucus0B10 --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --recv-keys --keyserver keyserver.ubuntu.com 16126D3A3E5C1192 gpg: requesting key 3E5C1192 from hkp server keyserver.ubuntu.com gpg: key 3E5C1192: "Ubuntu Extras Archive Automatic Signing Key <[email protected]>" not changed gpg: Total number processed: 1 gpg: unchanged: 1 And then started the same procedure but of no use.

  Read the article

• Ubuntu Extras keyring error

  - by Pawan Neupane

  Recently I got lots of GPG errors and tried the following methods at various stages: sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 3E5C1192 sudo apt-get install -reinstall ubuntu-extras-keyring (For Ubuntu Extras only) gpg –keyserver keyserver.ubuntu.com –recv 3E5C1192 gpg –export –armor 3E5C1192 | sudo apt-key add - sudo apt-get update sudo aptitude -o Acquire::http::No-Cache=True -o Acquire::BrokenProxy=true update sudo -i apt-get clean cd /var/lib/apt mv lists lists.old mkdir -p lists/partial apt-get clean apt-get update I again got BADSIG error for extras.ubuntu.com today. So, I'm really at a loss what's causing this error to occur time and again. I really want to solve this problem once and for all.

  Read the article

• Network is not working anymore - Ubuntu 12.04

  - by Jonathan

  Network is not working anymore - Ubuntu 12.04 Hello, I have a problem with my network connection. I have been using the same laptop with Ubuntu and the same connection for more than a year, and suddenly yesterday the connection stopped working (both wireless and wired). I've tested with another computer and the connection is fine (both wireless and wired). I've been reading similar posts but I haven't found a solution yet. I tried a few commands that I'm posting here (my system is in spanish, so I have traslated it to english, maybe the terms are not accurate): grep -i eth /var/log/syslog | tail Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): now managed Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): device state change: unmanaged - unavailable (reason 'managed') [10 20 2] Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): bringing up device. Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): preparing device. Jun 3 18:45:40 vanesa-pc kernel: [ 7351.845743] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X Jun 3 18:45:40 vanesa-pc kernel: [ 7351.845984] forcedeth 0000:00:0a.0: eth0: no link during initialization Jun 3 18:45:40 vanesa-pc kernel: [ 7351.847103] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): deactivating device (reason 'managed') [2] Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:0a.0/net/eth0 Jun 3 18:45:40 vanesa-pc kernel: [ 7351.848817] ADDRCONF(NETDEV_UP): eth0: link is not ready ifconfig -a eth0 Link encap:Ethernet addressHW 00:1b:24:fc:a8:d1 ACTIVE BROADCAST MULTICAST MTU:1500 Metric:1 Packages RX:0 errors:16 lost:0 overruns:0 frame:16 Packages TX:123 errors:0 lost:0 overruns:0 carrier:0 colissions:0 length.tailTX:1000 Bytes RX:0 (0.0 B) TX bytes:26335 (26.3 KB) Interruption:41 Base address: 0x2000 lo Link encap:Local loop Inet address:127.0.0.1 Mask:255.0.0.0 Inet6 address: ::1/128 Scope:Host ACTIVE LOOP WORKING MTU:16436 Metrics:1 Packages RX:1550 errors:0 lost:0 overruns:0 frame:0 Packages TX:1550 errors:0 lost:0 overruns:0 carrier:0 colissions:0 long.tailTX:0 Bytes RX:125312 (125.3 KB) TX bytes:125312 (125.3 KB) iwconfig lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network *-network description: Ethernet interface product: MCP67 Ethernet manufacturer: NVIDIA Corporation Physical id: a bus information: pci@0000:00:0a.0 logical name: eth0 version: a2 series: 00:1b:24:fc:a8:d1 capacity: 100Mbit/s width: 32 bits clock: 66MHz capacities: pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 latency=0 link=no maxlatency=20 mingnt=1 multicast=yes port=MII resources: irq:41 memoria:f6288000-f6288fff ioport:30f8(size=8) memoria:f6289c00-f6289cff memoria:f6289800-f628980f lsmod Module Size Used by usbhid 41906 0 hid 77367 1 usbhid rfcomm 38139 0 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 bluetooth 158438 10 rfcomm,bnep binfmt_misc 17292 1 joydev 17393 0 hp_wmi 13652 0 sparse_keymap 13658 1 hp_wmi nouveau 708198 3 ttm 65344 1 nouveau drm_kms_helper 45466 1 nouveau drm 197692 5 nouveau,ttm,drm_kms_helper i2c_algo_bit 13199 1 nouveau psmouse 87213 0 mxm_wmi 12859 1 nouveau serio_raw 13027 0 k8temp 12905 0 i2c_nforce2 12906 0 wmi 18744 2 hp_wmi,mxm_wmi video 19068 1 nouveau mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp forcedeth 58096 0 Let me know if I can give you more information. Thank you very much in advance, Jonathan

  Read the article

• Drivers Unresponsive, Only Ubuntu 8.0 can install

  - by Nate Dogg

  I tried to install through boot through disk, but the windows set-up says there's no hard drive. The new ubuntu cd's i've made do not work. I can't update anything on old ubuntu. This is all due to my computer turning off during a recent version upgrade of ubuntu. Kernel error? idk. Going throught my computer, none of my media drivers are responsive, or cd writing drivers, and I guess I have no hard drive (only old ubuntu can read?). Serious need of help, I cant write college papers on this....

  Read the article

• Wifi hotspot to connect to Android using non-AP supported cards

  - by 3l4ng

  I'm running Ubuntu 13.10 64b on a Dell Inspiron N5010. My wireless device (found using lspci) is Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01). I bought a new android phone and want to connect to Internet by using the laptop as a Wireless Access Point (ad-hoc doesn't work with Android). I tried following tutorials like the one at How to setup a wi-fi hotspot (access point mode)?. The relevant output from iw list was Supported interface modes: * IBSS * managed Running sudo hostapd /path/to/conf/file gave me (eth1 is the wireless, verified by iwconfig) Failed to create interface mon.eth1: -95 (Operation not supported) Could not set channel for kernel driver eth1: Unable to setup interface. Could not connect to kernel driver. I am able to use Connectify and Virtualrouter on Windows, and the phone works great. How do I get an access point running on Ubuntu? I'm open to other alternatives as well.

  Read the article

• Getting started with Document Set in SharePoint2010

  - by ybbest

  Folders are widely used in traditional file based system, in SharePoint world you can create folder in the document library as well. However, there is a new improved feature in SharePoint called Document Set; you can attach metadata to the document set. To get start with Document set, you can perforce the following steps. 1. Go to Site Settings >>Site collection features >>Activate the Document Sets feature. 2. After the Document Sets feature is activated, you will get a new content type called Document Set. 3. Next, we can create a custom content type called Loan Application Document Set that inherited from Document Set Content Type. 4. Then I create a new column called Application Number. 5. Add this field to the loan application content type 6. Create a new Content Type called Loan Contract form that inherited from Document content type. 7. Add the Application Number to the Loan Contract form content type. 8. Create a new Content Type called Loan Application form that inherited from Document content type and add Application Number to it.(The same step as above.) 9.Go to the Loan Application Document Set content type and go to the Document Set Settings. 10. You can define which content type you would like this Document set contains and you can also define the default document for each content type. When you create a new document set, those default documents will get automatically created in the document set. You can also define the Shared field that shared across content types; in my case I define the Application number and description as my shared fields. Finally, you can define the fields that you’d like to show in the document set welcome page. 11. Now create a new document library and attach those content types to the document library and create a new loan application document set. 12. You will see the default document created in the document set.If you updated Application Number on the document set , the field will get updated in the documents inside the document set as well.

  Read the article

• BIP and Mapviewer Mash Up I

  - by Tim Dexter

  I was out in Yellowstone last week soaking up various wildlife and a bit too much rain ... good to be back until the 95F heat yesterday. Taking a little break from the Excel templates; the dev folks are planing an Excel patch in the next week or so that will add a mass of new functionality. At the risk of completely mis leading you I'm going to hang back a while. What I have written so far holds true and will continue to do so. This week, I have been mostly eating 'mapviewer' ... answers on a post card please, TV show and character. I had a request to show how BIP can call mapviewer and render a dynamic map in an output. So I hit the books and colleagues for some answers. Mapviewer is Oracle's geographic information system, hereby known as GIS. I use it a lot in our BIEE demos where the interaction with the maps is very impressive. Need a map of California and its congressional districts? I have contacts; Jerry and David with their little black box of maps. Once in my possession I can build highly interactive, clickable maps that allow the user to drill into more information using a very friendly interface driving BIEE content and navigation. But what about maps in BIP output? Bryan Wise, who has written some articles on this blog did some work a while back with the PL/SQL API interface. The extract for the report called a function that in turn called the mapviewer server, passing a set of mapping requirements, it then returned a URL to a cached copy of that map. Easy to then have BIP render that image. Thats still very doable. You need to install a couple of packages and then load the mapviewer java APIs into the database. Then you can write your function to the APIs. A little involved? Maybe, but the database is doing all the heavy lifting for you. I thought I would investigate another method for getting the maps back into BIP. There is a URL interface you can call, this involves building an XML message to be passed to the mapviewer server. It's pretty straightforward to use on the mapviewer side. On the BIP side things are little more tricksy. After some unexpected messing about I finally got the ubiquitous Hello World map to render using the URL method. Not the most exciting map in the world, lots of ocean and a rather long URL to get it to render. http://127.0.0.1:9704/mapviewer/omserver?xml_request=%3Cmap_request%20title=%22Hello%20World%22%20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E Notice all of the encoding in the URL string to handle the spaces, quotes, etc. All necessary to get BIP to make the call to the mapviewer server correctly without truncating the URL if it hits a real space rather than a %20. With that in mind constructing the URL was pretty simple. I'm not going to get into the content of the URL too much, for that you need to bone up on the mapviewer XML API. Check out the home page here and the documentation here. To make the template portable I used the standard CURRENT_SERVER_URL parameter from the BIP server and declared that in my template. <?param@begin:CURRENT_SERVER_URL;'myserver'?> Ignore the 'myserver', that was just a dummy value for testing at runtime it will resolve to: 'http://yourserver:port/xmlpserver' Not quite what we need as mapviewer has its own server path, in my case I needed 'mapviewer/omserver?xml_request=' as the fixed path to the mapviewer request URL. A little concatenation and substringing later I came up with <?param@begin:mURL;concat(substring($CURRENT_SERVER_URL,1,22),'mapviewer/omserver?xml_request=')?> Thats the basic URL that I can then build on. To get the Hello World map I need to add the following: <map_request title="Hello World" datasource="cagis" format="GIF_STREAM"/> Those angle brackets were the source of my headache, BIPs XSLT engine was attempting to process them rather than just pass them. Hok Min to the rescue ... again. I owe him lunch when I get out to HQ again! To solve the problem, I needed to escape all the characters and white space and then use native XSL to assign the string to a parameter. <xsl:param xdofo:ctx="begin"name="pXML">%3Cmap_request%20title=%22Hello%20World%22 %20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E</xsl:param> I did not need to assign it to a parameter but I felt that if I were going to do anything more serious than Hello World like plotting points of interest on the map. I would need to dynamically build the URL, so using a set of parameters or variables that I then concatenated would be easier. Now I had the initial server string and the request all I then did was combine the two using a concat: concat($mURL,$pXML) Embedding that into an image tag: <fo:external-graphic src="url({concat($mURL,$pXML)})"/> and I was done. Notice the curly braces to get the concat evaluated prior to the image call. As you will see next time, building the XML message to go onto the URL can get quite complex but I have used it with some data. Ultimately, it would be easier to build an extension to BIP to handle the data to be plotted, it would then build the XML message, call mapviewer and return a URL to the map image for BIP to render. More on that next time ...

  Read the article

• Wired Network not working on Ubuntu 11.10 + Strange Behavior with Manual Conf

  - by Mauricio Cruz

  I'm new to Ubuntu - to be honest this is my very first day trying it... and I've already spent hours trying to make my wired connection work. I've been using this wired network with Windows and OSX, and in both systems I also had some trouble trying to connect in the past (and the troubleshooters did their magic and helped me get connected). Today, this is what I got: I'm running Ubuntu 11.10; ifconfig: eth0 Link encap:Ethernet HWaddr 78:2b:cb:c3:bf:8f UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1 errors:0 dropped:0 overruns:0 frame:0 TX packets:343 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:70 (70.0 B) TX bytes:63273 (63.2 KB) Interrupt:20 Memory:e2e00000-e2e20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1859 errors:0 dropped:0 overruns:0 frame:0 TX packets:1859 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:149368 (149.3 KB) TX bytes:149368 (149.3 KB) wlan0 Link encap:Ethernet HWaddr 10:0b:a9:82:55:c0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:15484 errors:0 dropped:0 overruns:0 frame:0 TX packets:16871 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:12048377 (12.0 MB) TX bytes:2677679 (2.6 MB) I also have some information from Windows ipconfig /all that I ran at my friend's machine Ipv6 Address: <address> preferential Ipv4 Address: 172.26.65.23 <preferential> Netmask: 255.255.254.0 Default Gateway: 172.26.64.1 DHCP Server : <address> DNS Servers : <address> DNS Suffix : <suffix> The weird thing is that I've tried to configure everything manually, using "Network Connections". When I add everything inside IPv4 Settings, the connection is finally successful, but only for 4~5 seconds before getting disconnected again... Update:I just changed the Connection Method to "Local-Link Only", and the same described above happens: At first, it says "Connection Stablished", but after a few seconds, the wired network gets disconnected. I hope someone can help me get connected! Thanks!

  Read the article

• Host is unreacheble with static networking configuration via /etc/network/interfaces while GUI NetworkManager is ok

  - by Riccardo

  I have some trouble setting-up the network interface using the static IP configuration. I run ubuntu 12.04 kernel 3.11.0-22 with the back-ports enabled. I followed these instructions from help.ubuntu.com but there seems to exist some conflict between the GUI approach (NetworkManager) and the command line approach. $ sudo nano /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.1.1.50 gateway 10.1.1.10 netmask 255.255.255.0 dns-nameservers 192.168.3.45 192.168.8.10 $ sudo /etc/init.d/networking restart I than try to ping for example google.com ping -c 3 www.google.com the response is that the host is unreachable. The icon on the top right of the desktop says: wired network disconnected. If I work using the GUI approach (Edit Connections and so on...) all works great. Can same one explain to me where I wrong? $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 90:e6:ba:07:4a:77 inet addr:10.1.1.50 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::92e6:baff:fe07:4a77/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:39619 errors:0 dropped:0 overruns:0 frame:0 TX packets:18520 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:19030895 (19.0 MB) TX bytes:2768769 (2.7 MB) $ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0

  Read the article

• Real Excel Templates 1.5

  - by Tim Dexter

  Not the next installment quite yet, just an update from what I knew yesterday. Right after I posted the Real Excel Templates I. Mike from the PM team got in touch to say he and Shirley had just had a meeting with a customer about the Excel Templates and all the fab features. He included BIPs extended functions, data pre-processing, sub templates and other functionality which was great new news. One caveat, much of the really new stuff, is not quite out in the wild yet. Will let you know as soon as I know more. Shirley and I shared a conversation around being able to re-group data in the templates. It's one of the most powerful features of the RTF template. Providing the ultimate flexibility in layouts. As I wrote yesterday, you need hierarchical data for Excel templates. I stand corrected, 'Of course you can do that in Excel, here's an example' said Shirley 'Very cunning Shirley, very cunning' says I. You can basically use the hidden sheet to re-group the data using native XSL. I'll cover the 'how' later. As you can see Excel templates are the new 'black' with lots of attention and more importantly development cycles to take them forward. Looks like we are going to have a great weekend weather wise here in Colorado. The yard work and pond are beckoning. Maybe the trout will be rising and I can give my rusty fly casting skills a run for their money. I need some stupid fish thou :0) See ya'll next week!

  Read the article

• terminal does not find xmonad.hs

  - by arpho

  Iam using xmonad on ubuntu 13.04, in ~/.xmonad my computer has the file xmonad.hs, if I try to read it from terminal using nano it opens a new file, I can access the file opening it from geany or gedit, but if I try to recompile it, the system does not find that file, so I cannot configure xmonad, every thing I try on this file from console does not work, because terminal even if I am root cannot see it, can you help me solve this issue?

  Read the article

• expand window to free space on screen in kde

  - by Pascal Rosin

  I am using Kubuntu and I want to expand the current window to the free space on the screen or to say it more precisely: I want to make the current window as big as possible without overlapping new windows (windows already overlapped should be ignored). Is there a keyboard shortcut or an extension to the KDE Window management, that realizes such a shortcut or a window button? I would also appreciate a hint, how to write a script that could do this window thing on keyboard shortcut invocation. I am a programmer but don't know what the best way is to control KDE Windows via script.

  Read the article

• Wireless Problem on Acer Aspire 5610z

  - by Ugur Can Yalaki

  I installed ubuntu 12.04 on my machine, but I can't get wireless connection to work. My computer is Acer Aspire 5610z. I found that some other people that have same computer, face the same problem. Here is some information about it: ****** info trace ****** * uname -a * Linux ucy-Aspire-5610Z 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux * lsb_release * Distributor ID: Ubuntu Description: Ubuntu 12.04.3 LTS Release: 12.04 Codename: precise * lspci * 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) Subsystem: AMBIT Microsystem Corp. Device [1468:0422] Kernel driver in use: b43-pci-bridge 06:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Acer Incorporated [ALI] Device [1025:0090] Kernel driver in use: b44 * lsusb * Bus 001 Device 004: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 5986:0100 Acer, Inc Orbicam Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub * PCMCIA Card Info * PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 * iwconfig * * rfkill * 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no * lsmod * ssb_hcd 12781 0 ssb 51554 2 ssb_hcd,b44 * nm-tool * NetworkManager Tool State: connected (global) Device: usb0 [Wired connection 2] ------------------------------------------- Type: Wired Driver: rndis_host State: connected Default: yes HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: on IPv4 Settings: Address: 192.168.42.7 Prefix: 24 (255.255.255.0) Gateway: 192.168.42.129 DNS: 192.168.42.129 IPv6 Settings: Address: ::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 Address: fe80::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 DNS: fe80::504d:76ff:fe86:db04 Device: eth2 ----------------------------------------------------------------- Type: Wired Driver: b44 State: unavailable Default: no HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: off * NetworkManager.state * [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true * NetworkManager.conf * [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false * interfaces * auto lo iface lo inet loopback * iwlist * * resolv.conf * nameserver 127.0.0.1 * blacklist * [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist-bcm43.conf] blacklist b43 blacklist b43legacy blacklist ssb blacklist bcm43xx blacklist brcm80211 blacklist brcmfmac blacklist brcmsmac blacklist bcma [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac * modinfo * filename: /lib/modules/3.8.0-32-generic/kernel/drivers/usb/host/ssb-hcd.ko license: GPL description: Common USB driver for SSB Bus author: Hauke Mehrtens srcversion: E127A51EDC8F44D2C2A8F15 alias: ssb:v4243id0819rev* alias: ssb:v4243id0817rev* alias: ssb:v4243id0808rev* depends: ssb intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 filename: /lib/modules/3.8.0-32-generic/kernel/drivers/ssb/ssb.ko license: GPL description: Sonics Silicon Backplane driver srcversion: 14621F6EC014F731244437C alias: pci:v000014E4d00004350sv*sd*bc*sc*i* alias: pci:v000014E4d0000432Csv*sd*bc*sc*i* alias: pci:v000014E4d0000432Bsv*sd*bc*sc*i* alias: pci:v000014E4d00004329sv*sd*bc*sc*i* alias: pci:v000014E4d00004328sv*sd*bc*sc*i* alias: pci:v000014E4d00004325sv*sd*bc*sc*i* alias: pci:v000014E4d00004324sv*sd*bc*sc*i* alias: pci:v000014E4d0000A8D6sv*sd*bc*sc*i* alias: pci:v000014E4d00004322sv*sd*bc*sc*i* alias: pci:v000014E4d00004321sv*sd*bc*sc*i* alias: pci:v000014E4d00004320sv*sd*bc*sc*i* alias: pci:v000014E4d00004319sv*sd*bc*sc*i* alias: pci:v000014A4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004315sv*sd*bc*sc*i* alias: pci:v000014E4d00004312sv*sd*bc*sc*i* alias: pci:v000014E4d00004311sv*sd*bc*sc*i* alias: pci:v000014E4d00004307sv*sd*bc*sc*i* alias: pci:v000014E4d00004306sv*sd*bc*sc*i* alias: pci:v000014E4d00004301sv*sd*bc*sc*i* depends: intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 * udev rules * PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb1:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb2:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb3:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" * dmesg * [ 2.385241] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00 [ 2.385256] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 2.385266] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 2.385276] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 2.385286] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 2.448147] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 2.468112] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00 [ 2.468124] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 2.468132] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 2.468140] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 2.508230] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 [ 2.528620] b44 ssb1:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver ******** done ******** Thank you already for your help.

  Read the article

• installArchives() failed: perl: warning: Setting locale failed.

  - by Alwin Doss

  I get the following error while updating ubuntu 12.04 LTS installArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... (Reading database ... (Reading database ... 5%% (Reading database ... 10%% (Reading database ... 15%% (Reading database ... 20%% (Reading database ... 25%% (Reading database ... 30%% (Reading database ... 35%% (Reading database ... 40%% (Reading database ... 45%% (Reading database ... 50%% (Reading database ... 55%% (Reading database ... 60%% (Reading database ... 65%% (Reading database ... 70%% (Reading database ... 75%% (Reading database ... 80%% (Reading database ... 85%% (Reading database ... 90%% (Reading database ... 95%% (Reading database ... 100%% (Reading database ... 430284 files and directories currently installed.) Preparing to replace libxml2-dev 2.7.8.dfsg-5.1ubuntu4.1 (using .../libxml2-dev_2.7.8.dfsg-5.1ubuntu4.2_i386.deb) ... Unpacking replacement libxml2-dev ... Preparing to replace libxml2 2.7.8.dfsg-5.1ubuntu4.1 (using .../libxml2_2.7.8.dfsg-5.1ubuntu4.2_i386.deb) ... Unpacking replacement libxml2 ... Preparing to replace gstreamer0.10-plugins-bad 0.10.22.3-2ubuntu2 (using .../gstreamer0.10-plugins-bad_0.10.22.3-2ubuntu2.1_i386.deb) ... Unpacking replacement gstreamer0.10-plugins-bad ... Preparing to replace libgstreamer-plugins-bad0.10-0 0.10.22.3-2ubuntu2 (using .../libgstreamer-plugins-bad0.10-0_0.10.22.3-2ubuntu2.1_i386.deb) ... Unpacking replacement libgstreamer-plugins-bad0.10-0 ... Preparing to replace ubuntu-keyring 2011.11.21 (using .../ubuntu-keyring_2011.11.21.1_all.deb) ... /var/lib/dpkg/info/samba4.postinst: 14: /var/lib/dpkg/info/samba4.postinst: /usr/share/samba/setoption.pl: Permission denied dpkg: error processing samba4 (--configure): subprocess installed post-installation script returned error exit status 126

  Read the article

• Battery management doesn't recognize removal of power supply

  - by Jason

  I have a Lenovo Y460p running Ubuntu 12.04 (64-bit). The battery does charge normally, but unplugging the power supply only very briefly shows the correct battery indicator. After about 1 second, it reverts to the charging indicator. If the power supply is connected the power statistics show: "Supply Yes" "Online Yes" If it is not connected it shows: "Supply Yes" "Online No" My problem is almost exactly like the one in this post: Ubuntu 11.10 power management does not recognize removal of power supply The only exception is that my system does not dual-boot with Windows. This is Ubuntu only. The computer in the other post is a Lenovo as well; not sure if that has anything to do with it. Any help would be greatly appreciated. Thanks.

  Read the article

• Trigger Happy

  - by Tim Dexter

  Its been a while, I know, we’ll say no more OK? I’ll just write …In the latest BIP 11.1.1.6 release and if I’m really honest; the release before this (we'll call it dot 5 for brevity.) The boys and gals in the engine room have been real busy enhancing BIP with some new functionality. Those of you that use the scheduling engine in OBIEE may already know and use the ‘conditional scheduling’ feature. This allows you to be more intelligent about what reports get run and sent to folks on a scheduled basis. You create a ‘trigger’ analysis (answer) that is executed at schedule time prior to the main report. When the schedule rolls around, the trigger is run, if it returns rows, then the main report is run and delivered. If there are no rows returned, then the main report is not run. Useful right? Your users are not bombarded with 20 reports in their inbox every week that they need to wade throu. They get a handful that they know they need to look at. If you ensure you use conditional formatting in the report then they can find the anomalous data in the reports very quickly and move on to the rest of their day more quickly. You could even think of OBIEE as a virtual team member, scouring the data on your behalf 24/7 and letting you know when its found an issue.BI Publisher, wanting the team t-shirt and the khaki pants, has followed suit. You can now set up ‘triggers’ for it to execute before it runs the main report. Just like its big brother, if the scheduled report trigger returns rows of data; it then executes the main report. Otherwise, the report is skipped until the next schedule time rolls around. Sound familiar?BIP differs a little, in that you only need to construct a query to act as the trigger rather than a complete report. Let assume we have a monthly wage by department report on a schedule. We only want to send the report to managers if their departmental wages reach and/or exceed a certain amount. The toughest part about this is coming up with the SQL to test the business rule you want to implement. For my example, its not that tough: select d.department_name, sum(e.salary) as wage_total from employees e, departments d where d.department_id = e.department_id group by d.department_name having sum(e.salary) > 230000 We're looking for departments where the wage cost is greater than 230,000 Dexter Dollars! With a bit of messing I found out you can parametrize the query. Users can then set a value at schedule time if they need to. To create the trigger is straightforward enough. You can create multiple triggers for users to select at schedule time. Notice I also used a parameter in the query, :wamount. Note the matching parameter in the tree on the left. You also dont need to return multiple columns, one is fine, the key is if there are rows returned. You can build the rest of your report as usual. At scheduling time the Schedule tab has a bit more on it. If your users want to set the trigger, they check the Use Trigger box. The page will then pop fields to pick the appropriate trigger they want to use, even a trigger on another data model if needed. Note it will also ask for the parameter value associated with the trigger. At this point you should note that the data model does not make a distinction between trigger and data model (extract) parameters. So users will see the parameters on the General and Schedule tabs. If per chance you do need to just have a trigger parameters. You can just hide them from the report using the Parameters popup in the report designer, just un-check the 'Show' box I have tested the opposite case where you do not want main report parameters seen in the trigger section. BIP handles that for you! Once the report hits its allotted schedule time, the trigger is executed. Based on the results the report will either run or be 'skipped.' Now, you have a smarter scheduler that will only deliver reports when folks need to see them and take action on the contents. More official info here for developers and here for users.

  Read the article

• Unable to Connect to Internet with 3G USB Dongle for Particular ISP

  - by Kush

  I'm using USB 3G Dongle for Internet. Previously I was using Tata Docomo (India) as provider, and the Internet was working fine. Now I've changed to BSNL, but I'm unable to connect to the Internet on Ubuntu. However, I've checked access point settings and other configuration which are required for BSNL, and it is working fine with same Dongle on Windows 7. Also, I'm able to connect Internet with other providers on Ubuntu, but problem persists only with Ubuntu. The access point for BSNL in my region is bsnlnet. In fact I configure the Dongle with BSNL using default Network Configuration wizard that pops up when USB Dongle is attached. When Dongle is attached and configured with BSNL, I can see network strength in Messaging menu, in Mobile Broadband category, of Ubuntu (note: my network icon still shows "not connected" status). And when I try to use the connection that I've created, it fails to connect. So far, I tried using Sakis3g script that I came up with while wandering over this issue on other forums, it didn't worked either. I also made sure that there are no special configuration made for BSNL on my Windows 7 installation, and still it is working fine there, the problem is only with Ubuntu. How can I fix it?

  Read the article

• Is there a keybind to minimize all windows, without a toggle?

  - by George Marian

  I know about the show desktop keybind (default Ctrl+Alt+D), which I use often enough. However, I'm looking for a way to minimize all windows without activating "show desktop". I'm on a default install (i.e Gnome, Metacity & Compiz). I've looked through all the locations to configure keybinds, that I know. I've also looked at the default keybind list in the Ubuntu wiki and in the Compiz wiki. (Not to mention, searching here.) I'm interested in knowing where it is available, if not in Gnome/Metacity/Compiz, or some other way to accomplish this with a keybind.

  Read the article

• Explaining Explain Plan Notes for Auto DOP

  - by jean-pierre.dijcks

  I've recently gotten some questions around "why do I not see a parallel plan" while Auto DOP is on (I think)...? It is probably worthwhile to quickly go over some of the ways to find out what Auto DOP was thinking. In general, there is no need to go tracing sessions and look under the hood. The thing to start with is to do an explain plan on your statement and to look at the parameter settings on the system. Parameter Settings to Look At First and foremost, make sure that parallel_degree_policy = AUTO. If you have that parameter set to LIMITED you will not have queuing and we will only do the auto magic if your objects are set to default parallel (so no degree specified). Next you want to look at the value of parallel_degree_limit. It is typically set to CPU, which in default settings equates to the Default DOP of the system. If you are testing Auto DOP itself and the impact it has on performance you may want to leave it at this CPU setting. If you are running concurrent statements you may want to give this some more thoughts. See here for more information. In general, do stick with either CPU or with a specific number. For now avoid the IO setting as I've seen some mixed results with that... In 11.2.0.2 you should also check that IO Calibrate has been run. Best to simply do a: SQL> select * from V$IO_CALIBRATION_STATUS; STATUS        CALIBRATION_TIME ------------- ---------------------------------------------------------------- READY         04-JAN-11 10.04.13.104 AM You should see that your IO Calibrate is READY and therefore Auto DOP is ready. In any case, if you did not run the IO Calibrate step you will get the following note in the explain plan: Note -----    - automatic DOP: skipped because of IO calibrate statistics are missing One more note on calibrate_io, if you do not have asynchronous IO enabled you will see:  ERROR at line 1: ORA-56708: Could not find any datafiles with asynchronous i/o capability ORA-06512: at "SYS.DBMS_RMIN", line 463 ORA-06512: at "SYS.DBMS_RESOURCE_MANAGER", line 1296 ORA-06512: at line 7 While this is changed in some fixes to the calibrate procedure, you should really consider switching asynchronous IO on for your data warehouse. Explain Plan Explanation To see the notes that are shown and explained here (and the above little snippet ) you can use a simple explain plan mechanism. There should  be no need to add +parallel etc. explain plan for <statement> SELECT PLAN_TABLE_OUTPUT FROM TABLE(DBMS_XPLAN.DISPLAY()); Auto DOP The note structure displaying why Auto DOP did not work (with the exception noted above on IO Calibrate) is like this: Automatic degree of parallelism is disabled: <reason> These are the reason codes: Parameter -  parallel_degree_policy = manual which will not allow Auto DOP to kick in  Hint - One of the following hints are used NOPARALLEL, PARALLEL(1), PARALLEL(MANUAL) Outline - A SQL outline of an older version (before 11.2) is used SQL property restriction - The statement type does not allow for parallel processing Rule-based mode - Instead of the Cost Based Optimizer the system is using the RBO Recursive SQL statement - The statement type does not allow for parallel processing pq disabled/pdml disabled/pddl disabled - For some reason (alter session?) parallelism is disabled Limited mode but no parallel objects referenced - your parallel_degree_policy = LIMITED and no objects in the statement are decorated with the default PARALLEL degree. In most cases all objects have a specific degree in which case Auto DOP will honor that degree. Parallel Degree Limited When Auto DOP does it works you may see the cap you imposed with parallel_degree_limit showing up in the note section of the explain plan: Note -----    - automatic DOP: Computed Degree of Parallelism is 16 because of degree limit This is an obvious indication that your are being capped for this statement. There is one quite interesting one that happens when you are being capped at DOP = 1. First of you get a serial plan and the note changes slightly in that it does not indicate it is being capped (we hope to update the note at some point in time to be more specific). It right now looks like this: Note -----    - automatic DOP: Computed Degree of Parallelism is 1 Dynamic Sampling With 11.2.0.2 you will start seeing another interesting change in parallel plans, and since we are talking about the note section here, I figured we throw this in for good measure. If we deem the parallel (!) statement complex enough, we will enact dynamic sampling on your query. This happens as long as you did not change the default for dynamic sampling on the system. The note looks like this: Note ----- - dynamic sampling used for this statement (level=5)

  Read the article

• The Social Business Thought Leaders - Esteban Kolsky

  - by kellsey.ruppel

  Esteban Kolsky's presentation at the Social Business Forum 2012 was meaningfully titled “Everything you wanted to know about Customer Service using Social but had no one to ask”.  A recent survey by ThinkJar, Kolsky’s independent analyst firm, reported how more than 90% of the interviewed companies consider embracing social channels in customer service the right thing to do for the business and its customers. These numbers shouldn't be too surprising given the popularity of services such as Twitter and Facebook (59% and 60% respectively in the survey) among organizations, the power consumers are gaining online and the 40% preference they have to escalate issues on social services. Moreover, both large enterprises and small businesses are realizing how customer retention is cheaper and easier than customer acquisition. Many companies are looking at communities and social networks as an opportunity to drive loyalty, satisfaction and word of mouth. However, in this early phase the way they are preparing to launch social support appears to be lacking at best: 66% have no defined processes for customer service over social channels 68% were not able to estimate ROI before deploying social in customer service Only 8% found the expected ROI Most of the projects are stuck in the pilot or testing phase In his interview for the Social Business Thought-Leaders, Esteban discusses how to turn social media hype in business gains by touching upon some of the hottest topics organizations face when approaching social support: How to go from social media monitoring to actionable insights How Social CRM should be best positioned in regard to traditional CRM The importance of integrating social data to transactional data  Conversations with customer service organizations points to 2012 as the year of "understanding what social means for supporting customers". Will 2013 be the year it all becomes reality? We invite you to listen to Esteban Kolsky's interview to understand how to most effectively develop cross-channel strategies that include social channels and improve both customer satisfaction and the overall customer experience.

  Read the article

• Window focus confusion in unity

  - by Bryan Agee

  I like having focus prevention set to high, so that I don't have some stupid auto-launched app steal my typing in the middle of something else. Unfortunately, Unity keeps focus on the right window while raising the new one. A number of times, this has caused me to close an application by accident that had control of the menu bar, even though it was underneath the new window. Is there a way to prevent raise without focus?

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >