Search Results

Search found 17018 results on 681 pages for 'floppy disk drive'.

Page 89/681 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• Why won't Kubuntu load my CD?

  - by Visualblocks

  I'm running Kubuntu 12.04.1 LTS and Kubuntu hasn't recognised my CD! Here are the results of a sudo fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000c5a81 Device Boot Start End Blocks Id System /dev/sda1 * 2048 964603903 482300928 83 Linux /dev/sda2 964605950 976771071 6082561 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 964605952 976771071 6082560 82 Linux swap / Solaris How am I meant to view it in say, Dolphin?

  Read the article

• How to create a filesystem mountable by windows in linux?

  - by wcoenen

  I have attached an external USB disk to my debian gnu/linux system. The disk showed up as device /dev/sdc, and I prepared it like this: created a single partition with fdisk /dev/sdc (and some more commands in the interactive session that follows) formatted the partition with mkfs.msdos /dev/sdc1 If I then attach the USB disk to a Windows XP or Vista system, then no new drive becomes available. The disk and its partition show up fine in the disk managment tool under "computer management", but apparently the file system in the partition is not recognized. How do I create a FAT32 file system which can actually be used in windows? edit: I've given up on this and went with a NTFS file system created by windows. In debian lenny this can be mounted read-write but apparently it requires you to install the "ntfs-3g" package and explicitly pass the -t ntfs-3g option to the mount command.

  Read the article

• What is the effect on LVM snapshot size when a file block is rewritten with it's original contents?

  - by NevilleDNZ

  I'm exploring using LVM snapshot's to off site incremental archives from a snapshot "master" file system. In essence: simply copy across only the files on the "master" that have changed since the last incremental copy to the "archive". Then snapshot the "archive" to retain the incremental. I am a bit puzzled as to the block usage behaviour of the archive's own incremental snapshot. I'm expecting that LVM is not smart enough to know that the "file block" is actually unchanged, and the a new copy will be allocated and written for the fresh "archive" file system. Can anyone confirm this, or point me to a document/page that gives some hints? BTW: the OS hard disk cache, hard disk physical cache and hard disk itself also doesn't need to do any actual "disk writes" as the "disk block" likewise is unnecessary. Any pointers to discussion of this style of optimisation would also be ineresting.

  Read the article

• POSH-y SQL Disk Space Monitoring

  - by merrillaldrich

  In a prior post I expressed my dismay that apparently Operations Manager (which I dig in other respects) has no love for SQL Server storage that uses mount points. Herewith, henceforth, forthwith is a PowerShell workaround I am using until I find out I am wrong, or there’s a management pack fix. The crux of the issue, I think, is that SQL Server itself has basically no visibility to the disks mounted using mount points, and that blind spot carries through to the management pack. That much is well...(read more)

  Read the article

• How to resize the disk of a Fedora guest VM in VMWare ESXi

  - by Cerin

  How do I resize (specifically increase) the disk size of a Fedora guest VM running under VMWare ESXi 4.1? I have a Fedora 16 VM with an ext4 formatted disk, and I've increased its disk size using the vSphere client from 50GB to about 250GB. I rebooted the guest, and it correctly shows this size using fdisk -l /dev/sda. However, df -H still shows the old size. I've found a few KB articles explaining how to resize partitions for some flavors of Linux, but nothing for Fedora with ext4. That article seems to imply I have to create a completely new partition, and that I can't simply expand the existing partition. Using Gparted, it also prevents me from simply resizing the existing partition. Is this impossible to do under Linux?

  Read the article

• Proper way to connect SATA and IDE Hard drives together?

  - by Bartek

  I have an old IDE hard drive that has a broken Windows install on it. It just won't boot up, and I've tried a variety of solutions. That's fine, I really just need a few files on the hard drive. I have a computer that uses a SATA connected hard drive. It's a working PC. I would like to connect the old IDE hard drive to that compute and basically browse through the file system, grab the files, and copy them to my existing computer. My problem is with my few attempts to connect the IDE drive I would get Boot Disk Failures and so forth. I guess it's trying to boot from the IDE but I'm not really sure. Any help would be appreciated, Thanks!

  Read the article

• Ubuntu 13.XX unable to mount USB HDD. Tried everything. I/O error boot sector/file system

  - by XaviGG

  I know that there are many posts related but none of them helped me. I will jump to the last test because it is the one that should work, but it does not. An external HDD with single partition slow NTFS formatted in Windows, empty and clean. Checked for errors, it tells that not errors where found. Moving to Ubutnu 13.04... Gparted throws the first error when trying to read the disk: Input/output error It appears as unknown the content of the disk. Unable to create partition table or format it, getting the same error when trying. If I try to mount it in the terminal it tells me the same, specifying that also there is an I/O error reading the boot sector. I have this problem since I upgraded (always with fresh install) to 13.04. I thought it will be solved by the 13.10 but it has the same behavior. I tried with two different HDD (HD and SSHD) that work perfectly in Windows 7. In 13.04 at least I got a trying of mounting where the icon of the drive started showing and disappearing until finally it disappeared. But now it doesn't even try. Possible causes: -The HDD was my old main HDD, so it had WIN,RECOVERY,SYSTEM,UBU,SWAP partitions. Maybe the way or place where the partition table is defined is not the best for an external HDD but I don't know a lot in that topic. I would appreciate a lot if someone can give me a guideline to convert one of these HDD in a working external HDD. No files to recover, nothing to care about. Just format completely the disk and be able to use it for storing backups without having to move the files first to the windows partition, load windows and then copy them to the external HDD. Because I want to use a file comparator for the backups. Thanks a lot Edit 1: I found an option in Windows to convert it to a dynamic HDD that warns me that I wont be able to run O.S. after changing. I suppose that is what I need because in the current mode I cannot safely extract it. But it tells me an error that it couldn't change the mode.

  Read the article

• How to speed up rsync/tar of large Maildir

  - by psusi

  I have a very large Maildir I am copying to a new machine ( over 100 BaseT ) with rsync. The progress is slow. VERY SLOW. Like 1 MB/s slow. I think this is because it is a lot of small files that are being read in an order that essentially is random with respect to where the blocks are stored on disk, causing a massive seek storm. I get similar results when trying to tar the directory. Is there a way to get rsync/tar to read in disk block order, or otherwise overcome this problem?

  Read the article

• SEO Marketing Strategies - Top Strategies to Drive Insane Traffic to Your Website

  SEO Marketing strategies are used to optimise online marketing campaigns and websites. Everything you do online should be optimised for the search engines, whether it is just your website or PPC campaigns, banner ads, articles, video's blogs etc...... Optimising your marketing efforts will drive insane traffic to your website, boosting your sales and profits. Let's take a closer look here.

  Read the article

• How to use unused space in ubuntu

  - by Ravi.Kumar

  I installed ubuntu on my machine with only 80 GB of memory anticipating that I will remove it later but now I want to keep it forever (until I am frustrated with linux). I have 500 GB in my machine and now I want to use that raw 420 GB of space. How I can I do that ? with "space/memory" I am referring to secondary memory not Ram. Here is output of : sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000dcb77 Device Boot Start End Blocks Id System /dev/sda1 * 2048 136718335 68358144 83 Linux

  Read the article

• USB connection issue

  - by user1664417

  Currently Im facing an issue when Im trying to connect any usb flash drive to my pc. ok, below is what happens to me: 1) I can connect usb keyboard and mouse without any issue. 2) however when i connect usb flash drive, there are 2 situations that are occuring randomly a) there is no usb drive mount in my computer, when device manager is checked, it shows error code 10, but is shown in disk management. b) my computer will have usb drive mounted, but when I click on it, it is empty. on right click the properties, the disk space show 0. (there are files within the usb) what i have done is: 1) run CCleaner to repair the registry, restart and try, but still not working. 2) uninstall the drive in device manager, restart and try, but still not working. 3) tried the port that connects mouse and keyboard, but does not work. anyone who experienced these problems before please guide me. any suggestions or solutions would be greatly appreciated. Thanks, Tony

  Read the article

• How to delete old pagefile.sys and hiberfile.sys on secondary disk (old windows install)

  - by Silvermist

  A while ago I swapped my main hard disk for a SSD. Now the old one is used as a secondary hard disk, and my OS is a fresh windows install on the main SSD disk. Nevertheless, there are still huge pagefile.sys and hiberfile.sys on that secondary hard drive. Those are not the ones used by the current windows, as those do exist on C:. I tried to attrib -s -h them, but it refused with "Access denied". Any idea how to delete those old unused system files and reclaim the space?

  Read the article

• What are the Windows G: through Z: drives used for?

  - by Tom Wijsman

  In Windows you have a C: drive. The first things labeled beyond that seems to be extra stuff. So my DVD drive is D: and if you put in a USB stick it becomes F:. And then some people also have A: and B:. But then, what and where are G: through Z: drives for? Is it possible to connect so many things to a computer to make them all in use? Or more than them? Would it give a BSOD? Or would this slow down the system somehow? Or what would happen? What if I want to connect even more drives to the computer? Because with the hard drive limits it's more efficient to buy more drives than to buy a single drive with a lot of capacity. Is it possible to create drive letters like 0: through Z: or AA: through ZZ:?

  Read the article

• Putting Ubuntu Server on to a networked HDD

  - by SimplySimon

  Firstly, I know very little about servers and secondly the 1Tb HDD I have has network capabilities, but no software is installed on it, so when connected to the computer it is seen as a network connection, but not as a drive. Any advice on how to get started would be great. Up until now, I have been using it as a USB drive which worked well, but when this is sorted, I would like it to be connected directly to our BT HomeHub accessible through the WiFi for all the family to use as a film and back up repository. I would then be able to set up individual accounts for each family member to use and may be, if possible, make it accessible from outside locations. The First question then is: How can I install Ubuntu server on the 1Tb HDD attached directly to the computers network port but which doesn't show up in Nautilus? HDD Western Digital 1.0Tb LBA 1953525168 Model: WD10EACS-00DB0 DCM: DHRNHT2CF

  Read the article

• Fixing USB drive auto-notify

  - by steevc

  Yesterday I was copying files from SD cards, but at some point they stopped auto-mounting. Didn't notice any errors. I can still mount by right-clicking the appropriate file in /dev in Konqueror. UPDATE: Slight correction. The drives never automounted, but I've stopped getting the notification that a drive is plugged in. What processes should I be checking? Something in Device Actions? I'm using Kubuntu 10.04

  Read the article

• How to make a launcher that will first navigate to a folder and then execute a command that resides in normal /usr/bin/

  - by Nirmik

  Okay this Question is basically directed for using GRIVE the linux client for Google Drive Details on how to do it are Here. The thing is that,evrytime i want the folder to sync,I have to navigate to the google drive folder and then execute the grive commnd. I want to make it simple..I want to make a launcher(I know how to make a *.desktop file). But in a .desktop file you always give path to executable file(generally .sh). Here,there is no script in the Grive folder.The app is as usual in /usr/bin/grive Now how do I make the launcher to first navigate to the grive folder and then execut the grive command.. Thanx :)

  Read the article

• Boot Ubuntu on smartphone SD card?

  - by berad

  Now here's what I want: Ubuntu on the SD card that lives in my phone. I like using Ubuntu portably and my phone as a flash drive, but I haven't been able to make these work together yet. I've tried booting off my Huawei U8800 (Android 2.2) and Nokia E66 with a micro-SD card (with 11.10, boots OK in a card-reader) on an eeepc 901 without luck. The Huawei doesn't show up in the BIOS boot menu. BIOS sees the Nokia but halts at "Boot error". I guess this is related to the phone's flash drive emulation and how it handles bootsectors, but I don't know enough about how that works to go any further. Has anyone succeeded in this?

  Read the article

• Can't install Ubuntu using Wubi on a Windows dynamic disk [closed]

  - by Tharindu

  Possible Duplicate: I can't able to install ubuntu alongside with Win7 ..: When I try to install ubuntu 12.04 - 64 bit alongside win 7 prof. 64 bit it generated the following error. How could I proceed without having this? I - An error occurred: Error executing command command= C:\Windows\sysnative\bcdedt.exe /set {1 bO4672f-5969-11)-a75c-d3d3Od877b8O} device partition= F: retval=1 stderr=An error has occurred setting the element data. The request is not supported. stdout For more information, please see the log file c\users\dell\appdata\local\temp\wubi-12.04

  Read the article

• Win Server 2008 R2 SP1 Repair Disk

  - by Horst Walter

  Is there nothing like "creating a repair disk" for Win Server 2008 R2 SP1. Or am I just missing it? Under Win7 I do just enter "Repair" and it finds "create a repair disk". Sorry - but I am not a professional Admin. Just using the server for my development environment. If there is no repair disk, is there something similar or something I should create in case I do have a system failure? Sure, a full backup is done, but anything else?

  Read the article

• Is it reasonable to make a RAID-1 array with a ram disk and a physical disk to maximize read performance and protect data?

  - by Petr Pudlák

  In one of the answers on SO (I forgot which one) I've seen a suggestion to make a RAID-1 array composed of a RAM disk and a physical partition. By adding the physical partition with --write-mostly and enabling --write-behind the system should read everything instantly from the RAM disk but still save all data to the physical partition so that the data are preserved and the RAID array can be assembled again after reboot. Is such a setup reasonable? Will it perform any better in some scenario than having just the physical partition and perhaps tweaking the kernel to favor disk cache (swappiness and vfs_cache_pressure)?

  Read the article

• Problems after installing Ubuntu LiveUSB on my 2nd HD

  - by user113106

  I decided to create a Ubuntu USB installer using the Universal USB Installer, selecting a Ubuntu 12.10 ISO. I selected my D: drive, my NON-windows7 carrying drive as install. After this I Re-booted my system and my PC began to Run the Ubuntu Boot-startscreen every time I power up the machine, giving errors like this: Root=Unknown I used my girlfriend's laptop to create, on the exact same way, a real! USB Ubuntu installer. Booting from that USB, picking the option Run Ubuntu from this USB I get the following error: http://postimage.org/image/63qkv98c1/ Let's try installing it from that USB to a Hard-Disk: http://postimage.org/image/usqbwymfx/ As I said: I do not have the Option to pick my Boot-section, at this very moment I can only access to the Ubuntu installation and nothing else. I've read about 90% of other Questions that could've been related, but I could not find a solution. BTW I'm running a Acer Aspire 2Quadcore 4gb DDR 2 Ati Radeon HD, 64bit and I've set my Bios OS-usage from Windows to "Others"

  Read the article

• Do you lose everything when you have a hard disk failure in a multi-hard disk LVM that does NOT use RAID?

  - by user72630

  I'm debating about using LVM for a media/file server because I would like to combine multiple physical hard disks into one volume. I do not wish to use any RAID in my LVM so my question is: If one of the multiple hard disks in my volume were to go down would I lose all my data or would I just lose the data that was stored on that individual disk? Also, if I were to just lose the data on the individual disk, would it be as simple as replacing that disk and restoring what was on it from a backup to recover? Thanks everyone.

  Read the article

• Tools for tracking disk usage

  - by Carey

  I manage a number of linux fileservers. These all run applications written from 0-10 years ago. As sometimes happens, a machine will come close to, or run out of disk space. Reasons include applications not rotating log files, a machine with 500GB of disk producing 150GB of new files every month that were not written to tape, databases gradually increasing in size, people doing silly things...generally a bit of chaos. Anyway, when a machine unexpectedly goes from 50% to 100% full in a couple of hours, I figure out what broke (lots of "du") and delete files or contact someone. I also can look at cacti graphs to figure out what the machine's normal disk usage is (e.g. for /home). Does anyone know of any tools that will give finer grained information on historial usage than a cacti/RRD graph? Like "/home/abc/xyz increased 50GB in the last day".

  Read the article

• Drive-By SEO For Your Blog (From the Marketing-Is-A-Habit-Not-Rocket-Science Worldview)

  My take is that if you don't have lots of time and budget, but you don't want to be left in the dark, dingy corners of the search engines (and social networks), learn how to drive-by SEO your blog. If it's simple and quick, you're more likely to make it a habit.

  Read the article

• Issues with external mounting after pysdm removed

  - by K. R. Huard

  So, I'm very new to ubuntu. I was having troubles getting my external hard drive to be read/write permission. It's owner is my macbook, and writing on the drive was repeatedly denied. In trying to sort this out, I tried the Nautilus commands (no success), installed the PYSDM application, changed some things (as suggested by this user in this forum http://askubuntu.com/a/113992 )but then found that I was getting an error message whenever I tried to mount an external storage device. The error is: Unable to mount DERPSTICK error mounting: mount exited with exit code 1: helper failed with: [mntent]: line 14 in etc/fstab is bad mount: only root can mount /dev/sdc1/ on /media/sdc1 Others with similar problems put their fstab up here, but I'm not sure how to bring it up, or if I should even try. Thanks for your time!

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >