Search Results

Search found 4068 results on 163 pages for 'intel gma'.

Page 89/163 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

  • Grub-Efi wrong resolution

    - by Nikki Kononov
    My question, as it comes from the title, related to grub, but it's a different thing. I re-installed Windows 7 and Ubuntu 12.10 in UEFI mode (before that I was using normal BIOS) and everything went perfectly fine. Both systems load as they should but there is one thing that keeps bothering me. The problem is before I installed both systems in UEFI I used to boot in both system using common grub (non-uefi) and resolution in this grub was correct (which is 1366x768). Right now with grub-efi I have wrong resolution (which is seems to be 640x480). So my question is can can I safely set grub-resolution using grub config files or issue is related to something else? (for instance graphics card). I am using Ubuntu 12.10 Intel HD 3000 + Nvidia GT 540M Optimus (I am using bumblebee) Kernel 3.5.0-19-generic all updates installed! I also added ubuntu x-swat ppa for drivers. Thank you for your help!

    Read the article

  • Windows 8 fresh install and 12.10 dual boot

    - by Sir Linuxalot
    I have a question concerning Windows 8 and dual booting with Ubuntu 12.10. I've researched answers here, but haven't seen a question that resembles mine exactly: Ubuntu install and dual Boot with Windows 8 UEFI UEFI hardware and dual booting with windows Ubuntu 12.10 wont boot Specifically, I'm pondering installing a fresh install of Windows 8 (for game purposes), and a fresh install of 12.10 and dual booting them. I'm not sure if UEFI is hardware specific or software specific, and I'm worried if I try to implement the dual boot I'm going to run into UEFI issues and have to go through the grief of getting things up and running by following a long and tedious procedure. Can I, starting with Windows 8, then install 12.10 without too much hassle? My current hardware config is: Microstar Motherboard 7514 with an Intel Core 2 Duo processor. The drive I'm thinking of using is a Western Digital TB drive, new out of the box. As always, any help would be appreciated. Thanks.

    Read the article

  • Blank Screen After Ubuntu 12 installation

    - by Atul
    On my dell laptop, running with windows 7, I installed Ubuntu 12. I used it for sometime, then i re-started to switch to windows. First time it got boot up with windows but then it got hanged. I re-started again and then blank screen with blinking cursor came and beep sounds also started to came. I read in few forums and this seems like a common issue with Ubuntu. I tried using the bootable USB for both windows 7 and Ubuntu but none of these are even getting detected. Please let me know if any of know the work-around. Below is configuration" Machine: Dell Studio BIOS: Phoenix OS: Windows 7 Motherboard: Intel

    Read the article

  • Ubuntu 12.10 "fakeRAID" RAID0 installation

    - by João André
    I have 2 80 Gb HDD's with a RAID 0 motherboard configuration (Intel Z77, fakeRAID) with a 100 Gb partition running Windows 7 and a 60 Gb partition where I would like to install Ubuntu 12.10. However, even though the installer seems to correctly detect the RAID 0 array, GRUB2 is not installed and the computer boots into Windows normally. The same thing does not happen when installing Fedora 17. The installer (Anaconda) also detects the disk array, but GRUB2 installation is successful. What exactly are the differences between Ubiquity and Anaconda? And is there a way to correctly install GRUB2 in a fakeRAID system, since there are no alternative Ubuntu CDs?

    Read the article

  • OpenGL (glx) not working with ubuntu 12.10

    - by user26766
    It all started when I installed nvidia's own (download from website) driver. Uninstalling it and reverting back to nvidia-current didn't solve the problem, so I have been playing with this for a while. It seems glx support is missing, and my intel graphics is not responding. gnome loads only in fallback mode. Here are some outputs: glxinfo name of display: :0.0 Error: couldn't find RGB GLX visual or fbconfig glxgears Error: couldn't get an RGB, Double-buffered visual optirun glxgears works fine lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff) Here's the content of log file when just after running glxinfo: less /var/log/Xorg.0.log | grep gl [ 112.156] (II) LoadModule: "glx" [ 112.157] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 112.157] (II) Module glx: vendor="X.Org Foundation" [ 112.157] (II) UnloadModule: "glx" [ 112.157] (II) Unloading glx [ 112.157] (EE) Failed to load module "glx" (module requirement mismatch, 0) Some more info... lsmod Module Size Used by bbswitch 13612 0 pci_stub 12623 1 vboxpci 23195 0 vboxnetadp 25671 0 vboxnetflt 23480 0 vboxdrv 320372 3 vboxpci,vboxnetadp,vboxnetflt parport_pc 32689 0 ppdev 17074 0 bnep 18141 2 rfcomm 46620 12 binfmt_misc 17501 1 snd_hda_codec_hdmi 32049 1 snd_hda_codec_realtek 78147 1 joydev 17458 0 uvcvideo 76750 0 videobuf2_core 32852 1 uvcvideo videodev 120310 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12861 1 uvcvideo videobuf2_memops 13405 1 videobuf2_vmalloc snd_hda_intel 33492 3 coretemp 13401 0 kvm_intel 132760 0 arc4 12530 2 snd_hda_codec 134213 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel kvm 414111 1 kvm_intel iwlwifi 386837 0 i915 520799 2 snd_hwdep 17699 1 snd_hda_codec snd_pcm 96668 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec psmouse 100389 0 drm_kms_helper 49113 1 i915 ghash_clmulni_intel 13221 0 snd_seq_midi 13325 0 snd_rawmidi 30513 1 snd_seq_midi btusb 22475 0 drm 288436 3 i915,drm_kms_helper serio_raw 13216 0 snd_seq_midi_event 14900 1 snd_seq_midi snd_seq 61555 2 snd_seq_midi,snd_seq_midi_event mac80211 535936 1 iwlwifi bluetooth 209249 22 bnep,rfcomm,btusb snd_timer 29426 2 snd_pcm,snd_seq snd_seq_device 14498 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78921 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 206797 2 iwlwifi,mac80211 aesni_intel 51038 1 cryptd 20404 2 ghash_clmulni_intel,aesni_intel aes_x86_64 17256 1 aesni_intel dell_wmi 12682 0 sparse_keymap 13891 1 dell_wmi dcdbas 14439 0 i2c_algo_bit 13414 1 i915 microcode 22804 0 lpc_ich 17062 0 soundcore 15048 1 snd snd_page_alloc 18485 2 snd_hda_intel,snd_pcm video 19391 1 i915 mac_hid 13206 0 wmi 19071 1 dell_wmi mei 40691 0 lp 17760 0 parport 46346 3 parport_pc,ppdev,lp ahci 25721 3 libahci 31192 1 ahci atl1c 41102 0 how can I fix this? any ideas? Here is another thing I've tried: sudo apt-get purge nvidia* sudo reboot sudo apt-get install bumblebee bumblebee-nvidia didn't make any difference. The most relevant post I found on the web was this: http://ubuntuforums.org/archive/index.php/t-1722306.html Here it's explained that the problem is with the priority of shared libraries that are loaded for glxinfo. Here's what I get when I look up the libraries: linux-vdso.so.1 => (0x00007fff6bf8b000) libGL.so.1 => /usr/lib/x86_64-linux-gnu/mesa/libGL.so.1 (0x00007f22d6ccd000) libX11.so.6 => /usr/lib/x86_64-linux-gnu/libX11.so.6 (0x00007f22d6993000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f22d65d3000) libglapi.so.0 => /usr/lib/x86_64-linux-gnu/libglapi.so.0 (0x00007f22d63ad000) libXext.so.6 => /usr/lib/x86_64-linux-gnu/libXext.so.6 (0x00007f22d619b000) libXdamage.so.1 => /usr/lib/x86_64-linux-gnu/libXdamage.so.1 (0x00007f22d5f97000) libXfixes.so.3 => /usr/lib/x86_64-linux-gnu/libXfixes.so.3 (0x00007f22d5d91000) libX11-xcb.so.1 => /usr/lib/x86_64-linux-gnu/libX11-xcb.so.1 (0x00007f22d5b8f000) libxcb-glx.so.0 => /usr/lib/x86_64-linux-gnu/libxcb-glx.so.0 (0x00007f22d5977000) libxcb.so.1 => /usr/lib/x86_64-linux-gnu/libxcb.so.1 (0x00007f22d5759000) libXxf86vm.so.1 => /usr/lib/x86_64-linux-gnu/libXxf86vm.so.1 (0x00007f22d5553000) libdrm.so.2 => /usr/lib/x86_64-linux-gnu/libdrm.so.2 (0x00007f22d5346000) libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f22d5129000) libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f22d4f25000) /lib64/ld-linux-x86-64.so.2 (0x00007f22d6f54000) libXau.so.6 => /usr/lib/x86_64-linux-gnu/libXau.so.6 (0x00007f22d4d20000) libXdmcp.so.6 => /usr/lib/x86_64-linux-gnu/libXdmcp.so.6 (0x00007f22d4b1a000) librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007f22d4911000) It seems "mesa" instead of nvidia-current is being used. However I didn't find any obvious link to /lib/nvidia-current in /etc/ld.so.conf (where the directories containing the shared libraries are listed). I don't know if there's anything missing or if this is normal. thanks, UPDATE: The problem was solved by updating to Ubuntu 13.04. It seems bumblebee was to blame, but I'm not sure what was going wrong...

    Read the article

  • I need acpi=off to boot, but this seems to disable wifi

    - by TheExp3rt
    To boot my computer, I have to use acpi=off in kernel options. Doing this apparently causes my wifi adapter to be switched off and prevents my mouse and USB keyboard to not work. If I change acpi=off to nomodeset, it fixes these problems. But then it sets my computer at a lower resolution. I am currently running Kubuntu 13.10, although none of the updates, starting from 12.04, changed the need for acpi=off. I assume I need acpi=off in because I have an oldish computer with an intel motherboard How can I boot without acpi=off? Output of uname -a: 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC x86_64 x86_64 x86_64 GNU/Linux

    Read the article

  • Unity spontaneously logs out in Ubuntu 12.04

    - by Yang
    This started happening after I upgraded from 11.10. I'm running on a Latitude 13 laptop with an Intel Mobile 4 Series Chipset Integrated Graphics Controller (not Nvidia) - no proprietary drivers. It seems to happen under load, though I can't tell if the load is caused by something with this problem or by a program I'm running. I'd like to try nailing this problem. Ideally I don't want to switch to something else (at least not before knowing that that's the only way out and that it's specific to Unity and not, say, X).

    Read the article

  • Mac mini 2012 graphic upgrade for UE4 Unity3D Blender

    - by DaCrAn
    I have a mac mini (late 2012) i7, 16gb ram Vengeance graphic card intel HD4000. I buy recently a thunderbolt expansion PCIE whit support a graphic card PCIE 2.0 16x whit space for Full leght card. I have dubts about what graphic card gona give me the best results for using the Unreal Engine 4 UE4 or Unity3D, and Blender. My badget cover a Nvidia Quadro K4000 3gb or ATI Firepro W7000 4gb. Any recomendation? What professional graphic card can be better for design games in 3D? Thanks. DaCrAn

    Read the article

  • Ubuntu freezes/crash after wake when upgraded to 13.10

    - by krustbr
    Back on 13.04 it didn't occurred. I've upgraded to 13.10, systems apparently working fine, but, when I put it to sleep(using or not using extended monitor) and try to wake up, I see the screen(both), without lock-screen, but completely freeze, Neither tty open, nor the keyboard works. So, only option remains is to force shut-down. Any clue how to investigate the cause or fix it? Thanks in advance, any info that'll help you could ask! Ubuntu 13.10 x64 - not a fresh install/upgraded - with Unity Dell Vostro 3550 AMD Proprietary Drivers - 13.11 / Hybrid with Intel

    Read the article

  • Need new developers-laptop, with ubuntu. Multiple ext displays, ssd, dock, NO DVD [closed]

    - by Ole Morten Amundsen
    I'm having a really hard time finding a great alternative for Macbook Pro (I have a MB pro '08). I'd like to return to ubuntu and need a kick-ass laptop. If you help, you've lead me back to linux :) Req: ubuntu friendly lots of memory 8G+ ssd 160GB+ great processor (intel sandy?) connect up to three external displays. this triple display looks cool No optical drive, NO DVD 13-17" dock. In place of the ridiculous optical drive (It's like having a floppy drive IMO): extra battery? 2nd ssd? extra graphics card? your suggestion The laptop should be designed for not having dvd. I can't find many, unless they are tiny 11"... I'm exited to know your answers!

    Read the article

  • Lenovo Y460 Shutdown/Reboot/Logoff doesn't work

    - by ultimatebuster
    This is a part of the massive dump of problems I'm encountering with my Lenovo Y460 and Ubuntu. Problem: Cannot shutdown/reboot/logoff. Logoff issue: http://ubuntuforums.org/showthread.php?t=1791439 Shutdown and Reboot often freezes without doing anything. Currently can only use hard reset. Maybe related to the tricks I did to work around the ATI/Intel issue. See: Lenovo Y460 ATI PowerXpress issue I'm not sure where I can find the shutdown/reboot logs. If you tell me I'll be happy to provide them. Not sure what to do as of right now other than never shutdown/reboot or logoff

    Read the article

  • Choppy video in vlc even with hardware acceleration on ATI Radeon HD

    - by l0b0
    After installing Catalyst 11.12 and studying instructions (1, 2) to enable hardware acceleration I ended up with the following command: sudo apt-get install xvba-va-driver libva-glx1 vainfo && \ vainfo && \ vlc --verbose 2 --ffmpeg-hw video.1080p.x264.mkv The output confirms that it's using the VA API: avcodec decoder: Using VA API version 0.32 for hardware decoding. But even after a reboot the video still looks choppy. There's no vlc output to indicate that the codec is having trouble, or that it's skipping frames. Any idea what could be the problem? Using vlc 1.1.12 with default settings. Also tried (in sequence): sudo apt-get install libva-glx1 sudo apt-get install --reinstall libgl1-mesa-glx:i386 libgl1-mesa-glx:amd64 libgl1-mesa-dri:i386 libgl1-mesa-dri:amd64 xserver-xorg-core Rebooting No luck yet. Specs from /proc/cpuinfo : Intel Core i7 CPU 950 @ 3.07GHz

    Read the article

  • No sound while playing multi-media in Ubuntu 12.04 for XPS15

    - by ved2254
    I have an XPS15 laptop, core i5, 8GB ram. Whenever I login my laptop I here the startup bongo sound. But my sound system just doesn't play anything, may it be a short audio clip or a movie. Output of lshw -c multimedia is : WARNING: you should run this program as super-user. *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:51 memory:f1c00000-f1c03fff WARNING: output may be incomplete or inaccurate, you should run this program as super-user. Headphones work just fine but there is no sound from the speakers. Is it a bug in multi-media players or ALSA?

    Read the article

  • Not able to suspend or hibernate

    - by Tim
    My Ubuntu 10.10 on my laptop Lenovo T400 is not able to suspend or hibernate. Whenever I click Suspend or Hibernate, the moon LED on the bottom of the lid flashes a few seconds, the screen quickly shows something like "some devices fail to suspend, error 5", and then the moon LED goes off and the display still has ambient light illumination. I suppose in suspend or hibernation state, the display should have no illumination, just like when the laptop is turned off, right? If I press any key, the unlock screen dialogue will pop out. I searched a little on the internet, and installed 'acpi-support' according to some advice but it does not help. Any suggestions to solve this problem? Thanks and regards! ADDED: Laptop specifications: CPU Intel Mobile Core 2 Duo P8800 @ 2.66GHz Penryn 45nm Technology RAM 1.9GB Single-Channel DDR3 @ 532MHz (7-7-7-20) Motherboard LENOVO 2764CTO (None) Graphics ThinkPad Display 1440x900 @ 1440x900 ATI Mobility Radeon HD 3400 Series (Lenovo) Hard Drives 244GB Western Digital WDC WD2500BEVS-08VAT2 (SATA) Optical Drives HL-DT-ST DVDRAM GSA-U20N AZCDW EFCPUZ452 SCSI CdRom Device AZCDW EFCPUZ452 SCSI CdRom Device Audio Conexant 20561 SmartAudio HD

    Read the article

  • Traktor Audio 2 DJ soundcard configuration

    - by Jaroslav
    I have a Traktor Audio 2 DJ USB sound card (the first version of what it's now called simply Traktor Audio 2) The problem in settings it only sees one output, when there should be two (I need that for Mixxx etc.) Also I want to be able set the sample rate to one of these: 44.1, 48, 88.2, 96 kHz or at least check which one is set. Additionally if possible setting the latency would be an advantage. Some info: $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: TraktorAudio2 [Traktor Audio 2], device 0: Traktor Audio 2 [Traktor Audio 2] Subdevices: 1/2 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 $ cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA ATI HDMI HDA ATI HDMI at 0xfdcfc000 irq 45 1 [TraktorAudio2 ]: snd-usb-caiaq - Traktor Audio 2 Native Instruments Traktor Audio 2 (usb-0000:00:1d.7-8)

    Read the article

  • XBMC freezes pc after viewing movies

    - by Eric
    Tough to replicate, but basically after watching any movie in my library on XBMC, it'll randomly start freezing my pc. All I can do is either force shutdown by holding down the power button or wait for it to shut itself down. It's not any particular movie, it's not any particular amount of time watching one. It only happens while using XBMC. PC is older, I know the hardware is outdated, but it's not overheating nor is a simple movie too much for it to play, at least I don't think it is. Specs: Intel Core 2 6400. nVidia Quardro FX 560 4GB RAM So any suggestions? I don't have any bug/error reports because it doesn't print out any. I'm trying to find a program like XBMC, as I like having my movies organized and not have to hunt through folders to find them, so any suggestions there?

    Read the article

  • Which of VLC's dependencies causes sound device detection?

    - by Raphael
    I am setting up a headless music server based on the minimal Ubuntu image. After having installed the packages openssh-server,pulseaudio, libmad0,flac,liboff0,libid3tag0,libvorbis0a,ffmpeg, mpd,mpc,mpdscribble, paman,paprefs,pavumeter neither my internal soundcard nor the external DAC where detected by pulseaudio, that is pactl list did only list the dummy devices. Several reboots did not change that. The hardware devices are detected properly: ~$ lsusb | grep Texas Bus 002 Device 002: ID 08bb:2706 Texas Instruments Japan ~$ lspci | grep Audio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Following a hunch, I installed vlc with all dependencies. After a reboot, both devices are detected! ~$ pactl list | grep "Sink: alsa_output" Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo Monitor of Sink: alsa_output.usb-Burr-Brown_from_TI_USB_Audio_DAC-00-DAC.analog-stereo Now I would like to remove VLC again but keep the devices. The question is: which of the many dependencies of VLC enables proper device detection? And why on earth is it not a dependency of pulseaudio?

    Read the article

  • How can I avoid the random restart of the xserver?

    - by Bernd
    I'm using a desktop pc with 64bit Ubuntu 12.04 (Kernel 3.2.0-24-generic). Hardware specs are - Intel Core i7 CPU 860 @ 2,80GHz x 8 - Nvidia GeForce GTS 250 - 750 GB Hard Disk ATA WDC WD7501AALS-00E3A0 (for my /home partition) - 128 GB Solid-State Disk ATA PLEXTOR PX-128M2S (for all other partitions) Since I reinstalled the PC with Ubuntu 12.04 the xserver restarts randomly. Most times when I watch a video in the browser (maybe a flash issue?) but sometimes the restart/crash appears when I'm working in an text-editor. How can I locate the problem? Which information is needed for a useful answer?

    Read the article

  • I can see traffic coming from google ads, even though I don't have any google ads running, how is that possible?

    - by freethinker
    I can see "googleads.g.doubleclick.net/pagead/ads...." as a referrer on my website. However I am not running any google ads. So how am I getting the traffic? Here's the complete URL http://googleads.g.doubleclick.net/pagead/ads?output=html&h=250&slotname=5275434421&w=300&lmt=1311690266&flash=10.1.102&url=http%3A%2F%2Fwww.humbug.in%2Fsuperuser%2Fes%2Fpromiscuous-modo-con-intel-centrino-adelantado-n-6200-agn-tarjeta-inalambrica--214946.html&dt=1311690268347&bpp=3&shv=r20110713&jsv=r20110719&prev_slotnames=7553874535%2C5896307875%2C8590890981&correlator=1311690268052&frm=4&adk=3153418812&ga_vid=1396001617.1311690268&ga_sid=1311690268&ga_hid=558368546&ga_fc=1&u_tz=-180&u_his=1&u_java=0&u_h=1024&u_w=1280&u_ah=960&u_aw=1280&u_cd=24&u_nplug=6&u_nmime=22&biw=1263&bih=851&fu=0&ifi=4&dtd=441&xpc=T5MgG9EVV9&p=http%3A%2F%2Fwww.humbug.in

    Read the article

  • Why does starting a program log me out?

    - by Bruce McKean
    I'm not a computer nerd but have been able to fix Ubuntu/Linux problems in the pass two years with a Google search but this on has me stumped. I upgraded to 12.04 about thirty days ago and all was well except that every time I tried to load KeePassX it would go to the login screen. I installed KeePass2 and all seemed to work. Last week I tried to load Bibble5 (Raw photo editor) and it would try to load and then back to the login screen. After a few days I gave up and downloaded Corel After Shot Pro (Corel's now owns Bibble5) and it has the same problem. Could someone please head me into the steps I need to follow to find out what is the cause? I'm interested in learning more about the Linux system. How to correct any future problems like this? Computer Specification: Processor : 8x Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz Memory : 8155MB (1092MB used) Operating System : Ubuntu 12.04 LTS Graphics Card : GeForce GT 520/PCIe/SSE2

    Read the article

  • USB gets disabled when i boot in linux (ubuntu 3.5.7)

    - by Gaurav Vyas
    I have connected USB keyboard & mouse to core i7 intel processor.When i boot my system in ubuntu with kernel 3.2.21 it runs properly i.e usb keyboard & usb mouse works satisfactorily. ISSUE When i boot my system in linux(ubuntu 3.5.7) USB keyboard & usb Mouse stops working.i have to boot my system by pressing "e" and then "Enter" i.e it directly links with the hardware.Mouse doesnt get power i.e LED under my optical mouse doesnt glow. kindly help me.

    Read the article

  • How do I get a Qualcomm Atheros Killer E2200 gigabit ethernet card working on a MSI Z87-GD65?

    - by Travis Allen
    So I literally just built my first computer from scratch and I can't get the network card to work as I've gathered it requires getting some drivers somehow.. Motherboard : MSI Z87-GD65 CPU : Intel Haswell i7 Ubuntu Ver : 12.04 Using the on-board network port Please help I'm about to start crying into my keyboard over this (not really). Any info would be greatly appreciated, also please be very specific as to what I have to do as I have not used Ubuntu very much so talk to me like a child, I won't take offence. Also I've already tried following the instructions here : How do I get a Qualcomm Atheros Killer E2200 gigabit ethernet card working? I don't know if I'm just retarded or am missing something

    Read the article

  • What's the story with TRIM support?

    - by Kent Boogaart
    The situation with TRIM in Ubuntu has me utterly confused. I don't know whether I need to manually run it or not. Sources I've found are disparate and unclear. I have Ubuntu 10.04 with latest updates (including kernel 2.6.32-26). I have an Intel X-25M drive with latest firmware, and it is formatted as ext4. So, does TRIM support run automatically? If not, how do I check if I need to run it, and then how do I run it if necessary?

    Read the article

  • How to disable laptop internal keyboard

    - by Abhijit Navale
    I am using external usb keyboard. I want to disable laptop's internal keyboard using software. I know that i can just remove the internal keyboards wire and disconnect it physically, but i wanted to disable it using software so that later I can enable it by just executing a command in terminal easily. I am talking about disabling the keyboard and NOT the keyboard layout. I am having Hp-Compaq Presario A965 TU Laptop Intel Centrino Core 2 Duo(Freq. 2 GHz). I am using 64 bit Ubuntu Lucid Lynx.

    Read the article

  • can't see myself in Skype video call

    - by seb
    I'm running 12.04 and I've installed skype via the software centre. As with 11.10 everything works fine with 12.04 as well. There is only one thing that does not work. I can't see myself in Skype video calls. The video call works fine, I can see the other side the other side can see me. Buid in microphone works. If I click on 'show myself' during the video call nothing happens. I know that it works on Ubuntu in general as I had it working a while back on a different machine (Xubuntu 11.04). Could that be related to the GPU? I'm now on a intel/nvidia one. Any Ideas where I can hunt for some options or tweaking?

    Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >