Search Results

Search found 13218 results on 529 pages for 'live usb'.

Page 89/529 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• Resize a pendrive Linux?

  - by user11239

  I'm running Ubuntu from USB media, which has a drive capacity of 250 GB, all existing as one FAT32 partition. However, when I created the bootable Ubuntu drive, only 4.79 GB were allocated for usage. Rather than put files directly into the /cdrom where the drive is mounted, I want to expand what is listed here in aufs to be at least 200 GB. I'm hopeful that I can do this live. Output of df : Filesystem 1K-blocks Used Available Use% Mounted on aufs 4051904 4050108 0 100% / none 1542852 284 1542568 1% /dev /dev/sdb1 244076800 4901648 239175152 3% /cdrom /dev/loop0 688000 688000 0 100% /rofs none 1547840 1496 1546344 1% /dev/shm tmpfs 1547840 4828 1543012 1% /tmp none 1547840 80 1547760 1% /var/run none 1547840 0 1547840 0% /var/lock none 1547840 0 1547840 0% /lib/init/rw Output of fdisk -l : Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00083fe4 Device Boot Start End Blocks Id System /dev/sdb1 * 1 30401 244196001 c W95 FAT32 (LBA) So basically what I want to do is get /dev/sdb1 to be entirely, or almost entirely read as aufs. I'm confused over how to do this, as the file systems are all part of /dev/sdb1 on one big partition, rather than separate partitions for separate file systems.

  Read the article

• How to get Wifi Working Properly - I am Noob

  - by user287853

  I'm a noob to Ubuntu, but not computers. I installed a full version of Ubuntu version 12 whatever it is. I run it on a machine that has Win7/Win8 on another hard drive. My wireless adapter is some tiny USB stick I got on eBay - it works great in Windows, but I can't get it to work in Ubuntu. More precisely, Ubuntu is providing me a list (sometimes) of wireless networks in the area and when I try to connect to mine it just keeps password prompting me even though the one I use is correct. I looked over all the settings multiple times and don't believe there is anything in error regarding what it takes to connect to my network. So, I thought maybe it is a driver issue and came across NDIS. I thought I should try installing it, but I don't know how when I can't connect the Ubuntu machine to the Internet. I tried some commands to no avail. I have the Ubuntu installation disc and it shows a NDIS common and utils .deb files in there. Can someone out there help me out to get this wireless setup so I can get online?

  Read the article

• Force startx to run X in a specific resolution and refresh Rate

  - by Z9iT

  From my past experience (using Win-Xp), this particular monitor works only on 60Hz , Best resolution being 1024x768. I have "installed and configured" Ubuntu 12.04 Minimal (on USB stick) so that most of the time terminal is used, however, whenever there is a need to enter GUI, I may issue startx command to go into gnome. However the problem is that on this particular system, issuing this command poses problem because its default refresh rate won't synchronize with the monitor. The display keep on flickering and utterly unreadable. It is visible that gnome has been loaded and default wallpaper and desktop items are visible. But the problem is due to refresh rate different than 60Hz. I am looking for a command attribute to startx command which will force the refresh rate to 60Hz and resolution preferably to 1204x768 I can open terminals with Ctrl+Alt+T and enter commands. Key combinations like Ctrl+Alt+NumPlus works flawlessly in distributions like solaris, but it's not working for me. Also the commands like xrandr -r 60 60 being refresh rate wont work. The same problem is faced even when I boot from a live CD

  Read the article

• fwupd to update OCZ RevoDrive firmware gets a 'Permission denied' error

  - by Late

  Try as I might I just don't get it working (http://www.ocztechnology.com/ssd_tools/OCZ_RevoDrive_and_RevoDrive_X2/). There's another thread here with an similar issue here: Command is giving me "bash: ./fwupd: cannot execute binary file" I'm running command ./fwupd /dev/sdb which keeps returning me bash: ./fwupd: Permission denied I have tried running both bit versions available of fwupd with both of the latest 32- and 64-bit Ubunty 11.10, running the OS from an USB stick, but to no avail (could this be the problem?). In the other thread it was suggested that chmod +x fwupd (or chmod 0755 fwupd) should resolve this issue, but at least for me it has been for naught. It was also suggested to install certain libraries, but those were already included in the Ubunty build and I didn't have any luck after updating with apt-get. I also tried giving fwupd more privileges, r, x and w but same charade, run it in different ways from different places (where I'd have the fwupd present, ofc) among other things. What I also tried is giving the Ubunty 10.04 LTS a shot but it didn't even launch on either of my computers, though that's not the issue here. If anyone has any ideas on what the problem is and how I could get this working, it would be most appreciated!

  Read the article

• How do I write to an outer truecrypt volume when the inner volume protection prevents writng?

  - by con-f-use

  In a nutshell After some time using the outer volume of a hidden volume in Truecrypt I cannot write to the outer volume anymore. The protection of the inner volume always kicks in before. How do I fix this? Details I'm using truecrypt's two layered encryption of a USB stick. The outer container carries my semi-sensitive stuff while the inner hidden values has a bit more valuable information. I use both, the inner and outer volume regularly and that is part of the problem. Truecrypt can mount the outer volume for writing while protecting the inner. Usually the inner volume, when not protected this way (or mounted read-only) would be indistinguishable from free space. That is of course part of the plausible deniability scheme of truecrypt. At the beginning, everything worked as expected. I could copy and delete data to the outer volume as I pleased. Now it seams that I have written and deleted enough data to have filled the outer volume once. Despite the write protection Ubuntu tries now to write to the continuous "free space" that is the inner volume. It does that although enough other free space is on the outer volume. But on this free space there used to be data so its fragmented and the file system write prefers continuous space. The write on the continuous free space of the outer volume of course fails (with the error message in the picture above) as Truecrypt's inner-volume-protection kicks in. The Question I know this is expected behaviour, but is there a better way to write to the outer volume that does not attempt to write to the hidden free space at the end? The whole question could be more generally rephrased to: How do I control, where on a partition data is written in Ubuntu?

  Read the article

• Lots of Internet browsing issues, all browsers

  - by dario_ramos

  Before the upgrade, everything was working fine. Now, however, I can connect to the Internet but a lot of stuff fails, and the weirdest thing is that it happens with Firefox, Chromium and Opera. Some of the things that fail: I can't log in to Stack Overflow, after entering user/pass it loads for a long time on Firefox and throws Error 408 (browser request timed out) on Chromium and Opera I can't log in to Hotmail, similar symptoms I can login to Facebook, but when I try to write a comment, or just post something in my wall, it stays loading for a long time, and then fails The first two issues seem to be related to secure pages, and the second one is another issue altogether, I believe. However, they all happen with all browsers, which is really weird. Talking about weird: I connect using a Huawei SmartAX MT 810 USB modem, which cost me blood and tears to get it working under Ubuntu. I ordered an ethernet modem/router with my ISP, and I'm still waiting, but this issue intrigues me anyway. Has anyone experienced this kind of problems? I Googled around, but couldn't find a similar case.

  Read the article

• jQuery live() ... have to click twice to activate links?

  - by neezer

  I have the following bit of code, simply: $(function() { $('a.add-photos-link').live('click', function(e) { $(this).colorbox({ overlayClose: false, onComplete: function() { $('#add_photos').submit(function(e) { // more stuff to do e.preventDefault(); }); } }); e.preventDefault(); }); }); However, this only seems to work after single-clicking on the link TWICE. These links are dynamically added to the page (a.add-photos-link). Why is this happening and what can I do to fix it so it fires after the first single-click?

  Read the article

• How invoke live method with arguments

  - by dorelal

  I am learning how to write jQuery plugin. So why I am doing what I am doing does not matter. I writing a plugin called live2 which does nothing else but internally calls live method. (function($) { $.fn.live2 = function() { /* if there are no elements then just return */ if (!this.length) return this; return this.each(function() { var $this = $(this); jQuery.fn.live.apply(this, arguments); }); // end of return this.each(function()) }; // end of plugin })(jQuery); Above code should be invoked just live any live method. Instead of live use live2. $('#container').live2('click',function(){ return false; }) But the plugin is not working. Any idea what the fix should be.

  Read the article

• Can this USB3 behaviour be anything else than a hardware failure?

  - by Jonas Wielicki

  While my motherboard is half a year old now (ASUS M5A99X EVO), I only recently made use of the USB3 boards (after purchase of USB3 external harddrive). However, I am encountering issues. I am running linux 3.6.7-4.fc16.x86_64. Initially, the harddrive worked fine with USB3 (amazing ˜160MB/s), but I had some problems after putting after putting the harddrive to sleep manually after use (backup) with hdparm -Y. After some time, the device disappears from lsusb and i see the following in dmesg: [ 1924.091107] xhci_hcd 0000:05:00.0: xHCI host not responding to stop endpoint command. [ 1924.091114] xhci_hcd 0000:05:00.0: Assuming host is dying, halting host. [ 1924.091147] xhci_hcd 0000:05:00.0: HC died; cleaning up [ 1924.091233] usb 11-1: USB disconnect, device number 2 [ 1924.091272] sd 6:0:0:0: Device offlined - not ready after error recovery Testing with my (USB3 capable) notebook, I could not immediately reproduce the behaivour. I put the drive to sleep with hdparm -Y and waited for like an hour, but it was still listed in lsusb and responded after a few seconds delay when I tried after the hour of waiting. After an hour, on the desktop, the device would've usually vanished. Googling for this issue, I came across hints that playing around with IOMMU settings and upgrading the BIOS might help. I upgraded the BIOS and tried both with and without IOMMU enabled, got similar results. Most disturbing is, that one of the two USB 3.0 hubs sometimes also disappears from lsusb (or does not show up after boot at all). I've also heard that there are some hardware issues with ASUS USB3 ports. Applying mechanic force to the capble doesn't push the issue to one side or the other. Also, udev seems to reenumerate all devices if I plug the HDD into the USB 3.0 port without success (I can notice from my keyboard layout being changed to the default, which I do not use normally). The drive is externally powered and the external power supply is plugged in (it also stays powered when unplugging from USB, although it will spin down then). So before I try to return the board, I wanted to find out whether this can be anything else than a failure on the motherboard?

  Read the article

• How play the video using “HTTP Live Streaming” in iphone?

  - by Warrior

  I am new to iphone development,I am parsing a XML URL and display its content in the table, when i click a row , its corresponding parsed tube URL is played using the movie player.I am using media player framework.Here is my code NSURL *movieURL = [NSURL URLWithString:requiredTubeUrl]; if (movieURL) { if ([movieURL scheme]) { MoviePlayerController *myMovie = [[MoviePlayerController alloc]init]; [myMovie initAndPlayMovie:movieURL]; } } This is working fine, but i want to play the video using "HTTP Live Streaming".How can i do that? Any tutorials and sample code would me more helpful.Thanks.

  Read the article

• Installing on a mac without a CD burner or USB boot

  - by Rafael

  I am new to Ubuntu, i installed it in an old PC and now it works GREAT!!! My Macbook pro has a glitch and refuses to run Mac OS X, so i installed Windows, and i really want Ubuntu since Windows is not for me. Here's the problem(s) my drive only READS DVDs, if i put a blank in it, it will ignore it and my mac has the updated EFI, so no booting from a USB connected device! I also tried Wubi, but then i cant make it a FULL partition and get rid of windows!!! Thank you!

  Read the article

• How to Create a Portable Version of RocketDock for a USB Flash Drive

  - by Lori Kaufman

  RocketDock is a lightweight, highly customizable application launcher, or dock, for Windows. You can install it on your computer or use a portable version on a USB flash drive to provide quick access to your portable programs. We’ll show you how to make RocketDock portable. However, first you must install RocketDock before making it portable. See our article about installing, setting up, and using RocketDock. Once you have installed RocketDock, right-click anywhere on the dock or on the icons on the dock and select Dock Settings from the popup menu. HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online

  Read the article

• Cannot connect to secure wireless with Netgear wna3100 USB

  - by Vince Radice

  I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

  Read the article

• How to run installation CD for second monitor?

  - by dobsoft

  I am running ubuntu 14 off of a live USB. I have a second monitor that I would like to use while using ubuntu. It has an installation cd that you have to install before using, and when I click on the .exe file the Archive Manager tries to open it and says an error occurred while loading the archive. Thanks for the help. Edit: additional information It just doesn't show up when when I'm in the display settings area. I press the locate(name is probably something else) monitor button too. I know it needs the CD because when I was using it with Windows it didn't work until I went through the installation process on the CD. If ubuntu doesn't use .exe files is there a way to use the CD still? Monitor info from label: -acer LCD monitor -model number: S200HQL Version: S200HQL bd I connect it to my computer using a VGA cord which is connected to a j5create VGA to USB adapter. Not sure if this helps: VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) lsusb output: Bus 002 Device 004: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 005: ID 0bc2:2100 Seagate RSS LLC Bus 002 Device 007: ID 0711:5200 Magic Control Technology Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1bcf:2c18 Sunplus Innovation Technology Inc. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• Boot Ubuntu from a bootable USB hangs on purple screen

  - by user210946

  I recently bought a laptop (Lenovo Y410P) with Windows 8 pre-installed and I'm trying to dual boot Windows 8 and Ubuntu 13.0. I created a bootable usb using Pendrive. Then I changed the Boot Mode to Legacy Support and the boot order so it boots from the flash storage first. When I restarted the computer, I got the error message "SYSLINUX 4.06 EDD 2012-10-23 Copyright (c) 1994-2012 H. Peter Anvin et al" and it just hung there. Fair enough. After some googling I formatted my flash drive in FAT format instead of FAT32. The "SYSLINUX..." error message is gone but now it hangs on a purple screen http://imgur.com/WbdXpZN Does anyone have a suggestion what to do here? I've looked at various posts but none of them seems to have a solution that the author confirmed it worked.

  Read the article

• Grub failure after cat removed USB drive

  - by user76270

  I had a perfectly working Ubuntu Server system with U12.4 and Server installed and was setting up the mail system. When I was absent from my computer room my cat (furry type) apparently got to play with a USB dongle on an extension cable and removed it. The system went berserk and now will not boot. I ran Ubuntu 12.4 on the install disk and the directory structure and every thing appears to still be on the drives. How do I recover the GRUB boot section without the system repartitioning everything and wiping everything else? Please I am a total newb when it comes to Linux errors and fixing them.

  Read the article

• Grub rescue after installing Ubuntu from USB

  - by Victor Suarez

  I have Windows 7 installed in my internal HDD and wanted to try out Ubuntu so I have an USB to put Ubuntu LiveUSB on and installed Ubuntu on a external HDD and everything worked out fine. Now the problem. If I remove the external HDD and try to boot Windows normally it shows the grub rescue screen. The only way to boot into Windows is by having the external HDD attached. Is there any way I can make it so I won't have to have the external HDD attached to be able to boot my Windows 7?

  Read the article

• Can I make a bootable USB flash drive for Mac from Windows

  - by Patrick

  Problem: MacBook hard drive crashed and is ruined. I need to work on a music assignment on a program only available for Mac OS X and Ubuntu, and will not be able to get a new hard drive for the Mac before the assignment is due. I only have non-administrator access to Windows XP and 7 computers. Can I make a USB drive with Ubuntu on it so I can use my MacBook with this? Can I create this from a Windows computer? Please give detailed steps, if possible, for I am a noob when it comes to computers, and especially Linux.

  Read the article

• Wifi USB interface being detected after some time

  - by Dani

  I've got a wifi interface connected by USB (its chipset is the zd1211b, which I think it works with the zyd driver). When I log into my ubuntu 12.04 it don't detect the inteface but after waiting an indeterminate amount of time (sometimes a few minutes, sometimes half an hour or more) it is detected and it works fine. It's just to weird and also very annoying because you don't know when are you going to be able to use the wireless connection. Any solution to this? Can I force somehow the SO to detect the interface?

  Read the article

• Ubuntu will not load up from my USB

  - by Ryan Mungwira

  I have a Sony Vaio Duo 13 and I am trying to get Ubuntu 13.10 to run on a partition on my Ultrabook but it will not load up from the USB drive. It goes to the black screen that asks if you just want to Try Ubuntu or if you want to Install it. I click just to try and it will not load. It acts like it is going to start up but then it just goes to a blank black screen and then I have to a hard restart. It does that when I click install as well. And I have tried disabling the Secure Install on my computer as well and nothing happens! What do I do?!?

  Read the article

• No keyboard after suspend, even after hard reset

  - by subatomics

  all. While I was using a Ubuntu 9.1 live CD, I put the computer (Toshiba Satellite C655) into standby. After I resumed, the keyboard stopped functioning, though the mouse (USB) still worked. I decided to turn off the computer, but after Ubuntu shuts down, it asks you to press "enter" to actually turn the machine off. The keyboard was still dead, so I all I could do was use the on/off switch to power down the computer. Now, when I try to boot the computer, nothing happens. Before this problem, I would see a menu asking me to select an OS (I had Windows 7 and Windows XP installed). I cannot use any emergency measures because I need to press F12 to boot from a CD, and the keyboard is still not working. I tried removing the HD to force a boot from the CD, but it didn't work. I also tried to plug in a USB keyboard, which failed as well. Right now, I have no idea how to fix this. Any ideas? Thanks.

  Read the article

• USB internet not accessible

  - by Eric

  I'm brand new to ubuntu and linux. We access internet from a usb stick issued by a local telephone company. When I plug the stick into the computer, I see the device listed under internet connections as a mobile broadband device but it is grayed out and inaccessible. I tried to create a new mobile broadband connection but my country (Gabon) is not listed and we have no payment plans per se (we pay from a pre-paid card system).. Any clues as to how I can get the system to recognize the internet connection? Thanks for any help...

  Read the article

• Auto mount USB drive with permissions for all users

  - by oneaustin

  I have an Ubuntu 14.04 based Media Center and I store the media files on a USB HDD. I add files to drive directly on a Mac so I have it formatted as FAT32. The problem is that after reconnecting the drive to the Ubuntu, it mounts at /media/user/drivename and only the root user is allowed access. I need several applications to have full access to this drive. I can change file permissions in the terminal but it doesn't change because of the /media/user location. I am able to manually sudo mount /dev/sdc1 /media/drivename & sudo chmod 777 /media/drivename but the mount point changes each time. Is there a way to make this drive always mount where root and other applications have access?

  Read the article

• Languages and tools that are "portable" (work well from a USB storage drive) [closed]

  - by CodexArcanum

  I'm a huge fan of running programs from my portable hard drive: it means I always have my favorite tools no matter what computer I'm on. Sadly, development tools seem to be hard to get portable at times. I recently realized that the "portable" version of MinGW I was using off my USB drive was actually interfering with a locally installed version of MinGW, so sometimes even the tools you think are portable, aren't. So what are the best portable development tools that you've used? What runs well on a portable media, leaves the host machine clean, and generally makes moving around easier for you?

  Read the article

• How to update the USB Ubuntu (ISO) with new software

  - by nakata

  I have Peppermint (based on Ubuntu) running of USB. Its bascially an ISO image that loads using Grub4Dos. Problem is that I each time I load Ubuntu - and want to use i.e. teamviewer or Firefox...I have to install it on the running live system. Since its running from a ISO image...a reboot means the software is gone. I can edit/open the ISO image using WinImage (on XP) - would you know how I can add extra software into this ISO image so next time Ubuntu loads...the new software is on there? Is there some special repositary director where I should copy the software files into and recreate the ISO image? The directory structure of this iso image is along the lines of: .disk [BOOT] Casper dists install isolinux pool preseed Appreciate your help with this. The software I am really interested in installing is the plugin for LogMeIn (for which I may need Firefox...thus I need Firefox installation) and Teamviewer. Thanks Nakata

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >