Search Results

Search found 6035 results on 242 pages for 'longer'.

Page 89/242 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• Laptop connects to other network but not to my home wireless

  - by Nilesh

  My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

  Read the article

• Why do Cisco IOS routers hang in the middle of large downloads?

  - by cjavapro

  After a few years in use. We have seen Cisco 871 and 851 routers that would hang if you had a single download that was more than 100M large. It is intermittent. Sometimes the problem goes away, sometimes it happens on very small downloads (just a 10KB web page). It seems that the just about all the downloads eventually finish, but the bigger the download the longer the hang. Is there a way to resolve this? (short of router replacement which is what we have been doing)

  Read the article

• Source of Unexplained Requests in Server Logs

  - by Synetech inc.

  Hi, I am baffled by some entries in my server logs, specifically the web-server logs. Other than normal, expected traffic, I have noticed three types of request errors (eg 404, etc.): Broken links, ie links from old, external pages that point to pages that are no longer here Sequences of probes, ie some jerk trying to hack in by scanning my server for a series of exploitable admin type pages and such What appear to be completely random requests for things that have never existed on the server or even have anything to do with the server, and appear by themselves (ie not a series of requests like the probes) Could it somehow be a mistyped URL or IP? That’s about the only thing that I can think of, but still, how could I get a request on say, foobar.dyndns.org (12.34.56.78) for something like www.wantsfly.com/prx2.php or /MNG/LIVE or http://ant.dsabuse.com/abc.php?auth=45V456b09m&strPassword=X%5BMTR__CBZ%40VA&nLoginId=43. (Those are a few actual requests from my logs.) Can someone please explain scenario three to me? Thanks.

  Read the article

• How to perform fresh linux install while preserving software raid and user accounts

  - by slayton

  I have a system with two software raid arrays. The OS is Ubuntu 9.04 and is no longer receiving updates. I'd like to update the system to 12.04 rather than trying to do the automatic update from 9.04-> 9.10-> ... -> 12.04. My main drive has 2 partitions that are mounted at / and /home. Is it possible to do a fresh install of linux to the partition where / is mounted while preserving user accounts and preferences (such as passwords, home dir locations, etc...)? Additionally what do I need to do to keep my software raid array intact following the OS re-install?

  Read the article

• Choosing a type for search results in C#

  - by Chris M

  I have a result set that will never exceed 500; the results that come back from the web-service are assigned to a search results object. The data from the webservice is about 2mb; the bit I want to use is about a third of each record, so this allows me to cache and quickly manipulate it. I want to be able to sort and filter the results with the least amount of overhead and as fast as possible so I used the VCSKICKS timing class to measure their performance Average Total (10,000) Type Create Sort Create Sort HashSet 0.1579 0.0003 1579 3 IList 0.0633 0.0002 633 2 IQueryable 0.0072 0.0432 72 432 Measured in Seconds using http://www.vcskicks.com/algorithm-performance.php I created the hashset through a for loop over the web-service response (adding to the hashset). The List & IQueryable were created using LINQ. Question I can understand why HashSet takes longer to create (the foreach loop vs linq); but why would IQueryable take longer to sort than the other two; and finally is there a better way to assign the HashSet. Thanks Actual Program public class Program { private static AuthenticationHeader _authHeader; private static OPSoapClient _opSession; private static AccommodationSearchResponse _searchResults; private static HashSet<SearchResults> _myHash; private static IList<SearchResults> _myList; private static IQueryable<SearchResults> _myIQuery; static void Main(string[] args) { #region Setup WebService _authHeader = new AuthenticationHeader { UserName = "xx", Password = "xx" }; _opSession = new OPSoapClient(); #region Setup Search Results _searchResults = _opgSession.SearchCR(_authHeader, "ENG", "GBP", "GBR"); #endregion Setup Search Results #endregion Setup WebService // HASHSET SpeedTester hashTest = new SpeedTester(TestHashSet); hashTest.RunTest(); Console.WriteLine("- Hash Test \nAverage Running Time: {0}; Total Time: {1}", hashTest.AverageRunningTime, hashTest.TotalRunningTime); SpeedTester hashSortTest = new SpeedTester(TestSortingHashSet); hashSortTest.RunTest(); Console.WriteLine("- Hash Sort Test \nAverage Running Time: {0}; Total Time: {1}", hashSortTest.AverageRunningTime, hashSortTest.TotalRunningTime); // ILIST SpeedTester listTest = new SpeedTester(TestList); listTest.RunTest(); Console.WriteLine("- List Test \nAverage Running Time: {0}; Total Time: {1}", listTest.AverageRunningTime, listTest.TotalRunningTime); SpeedTester listSortTest = new SpeedTester(TestSortingList); listSortTest.RunTest(); Console.WriteLine("- List Sort Test \nAverage Running Time: {0}; Total Time: {1}", listSortTest.AverageRunningTime, listSortTest.TotalRunningTime); // IQUERIABLE SpeedTester iqueryTest = new SpeedTester(TestIQueriable); iqueryTest.RunTest(); Console.WriteLine("- iquery Test \nAverage Running Time: {0}; Total Time: {1}", iqueryTest.AverageRunningTime, iqueryTest.TotalRunningTime); SpeedTester iquerySortTest = new SpeedTester(TestSortableIQueriable); iquerySortTest.RunTest(); Console.WriteLine("- iquery Sort Test \nAverage Running Time: {0}; Total Time: {1}", iquerySortTest.AverageRunningTime, iquerySortTest.TotalRunningTime); } static void TestHashSet() { var test = _searchResults.Items; _myHash = new HashSet<SearchResults>(); foreach(var x in test) { _myHash.Add(new SearchResults { Ref = x.Ref, Price = x.StandardPrice }); } } static void TestSortingHashSet() { var sorted = _myHash.OrderBy(s => s.Price); } static void TestList() { var test = _searchResults.Items; _myList = (from x in test select new SearchResults { Ref = x.Ref, Price = x.StandardPrice }).ToList(); } static void TestSortingList() { var sorted = _myList.OrderBy(s => s.Price); } static void TestIQueriable() { var test = _searchResults.Items; _myIQuery = (from x in test select new SearchResults { Ref = x.Ref, Price = x.StandardPrice }).AsQueryable(); } static void TestSortableIQueriable() { var sorted = _myIQuery.OrderBy(s => s.Price); } }

  Read the article

• SSH not working after Restoring Running-Config to a Replacement Cisco Router

  - by Kyle Brandt

  One of my Cisco routers died over the weekend, Cisco sent the replacement and I restored the the config using copy tftp: running-config. Everything seems to work fine but I can no longer ssh into the router (I can telnet). The connection is refused, so it isn't listening on port 22 it seems like. I had previously backed up the config by just doing ssh router 'show run' > backup_config from my workstation. So: Is there anything wrong with my method of backup vs copy running-config tftp:? I know I haven't given any debug information, but is there something typical I need to do to get ssh working?

  Read the article

• RAM module randomly stopped working

  - by nhinkle

  My laptop is a Dell Inspiron e1505. It came with 2x512 MB of RAM installed, and about a year and a half ago I decided to upgrade it to 2x1 GB. I bought two 1GB memory modules from newegg and installed them, and all worked fine. Just last night my laptop was working fine; this morning I booted up and there was a BIOS warning saying "amount of system memory has changed". I tried reseating the modules, but that didn't fix it. Then I removed each one individually, and determined that one of the sticks appears to no longer be working. This happened very abruptly - I hadn't noticed any problems which might have been indicative of impending failure. Does anybody have any clue what may have caused this, and if there's any hope of making it work again? The memory only had a 30 day warranty, so I can't RMA it.

  Read the article

• Re-Calibrate Toshiba battery meter with Windows 7

  - by Farseeker

  Hi All. I have a Toshiba U300 laptop. Back in the olden days (circa-2000) you could re-calibrate the battery meter from the BIOS when your battery was no longer reading accurately. My battery was shot, so I bought a brand new one, however Windows 7 still seems to count down the battery life in at the same speed as the old one did. This time, when it alleged 0%, I turned the laptop back on and got another 90 minutes of life out of it, at 0%. Is there a tool or utility for Toshiba laptops that can fix it back to being accurate? I've read the other threads on SU about cycling the battery but that just doesn't seem to do it in this case. Update: After the last cycle, the battery meter now reads 100% but the indicator on the front of the laptop is still orange (indicating not fully charged)

  Read the article

• How do i enable deflate on apache2? debian

  - by acidzombie24

  I looked at the other answers and those solutions did not help. I am completely confused how to do this. I know almost nothing about apache nor how to use it and nearly all the article say write this but doesnt tell me where. So far i have done this # a2enmod deflate Module deflate already enabled Then i tried writing this in httpd.conf AddOutputFilterByType DEFLATE text/html text/plain text/xml text/css Then i wrote a longer version which involved deflate.c. After those didnt work i deleted them all and wrote the AddOutputFilterByType line in apache2/sites-enabled/000-default inside of I used this to test http://www.whatsmyip.org/http_compression/ everytime it says no compression. I used another site but i could never compress. Also i restart the server everytime i save a file so what could be the problem and how do i enable this properly?

  Read the article

• Firefox completes the address bar with content absent from my history

  - by Antoine

  I have set Firefox to complete the address bar with elements from the history only ( other options are: nothing, bookmarks, and a history+bookmarks). However, Firefox still continues to complete the address bar with elements that are no longer in my history. A search in the history returns 0 result for the incriminated string. How can I solve this without loosing my entire history? I have already tried shift+delete on the elements I would like to delete, without success. How can I find the source of a certain completion ? (like an SQL request in the sqlite3 files used to store history) I'm using Firefox 16.0.2 on OS X 10.8.2.

  Read the article

• Cannot Join a Domain on VM

  - by arvind0007

  Hi Guys. I have installed Windows 2003 server R2 on a VM. This VM is running on Windows XP PRO. When i try to make this XP Pro PC join the domain on the VM it tries to locate the server and gives me the following error message " The specified network name is no longer available", despite the fact that i can still see this domain on my network. can anyone help with this please. This is the very first time i am trying connecting a client to a VM server so hope am not doing anything wrong.. thanks

  Read the article

• What kind of SATA interface is on a Thinkpad X120E?

  - by Jorge Castro

  I recently ordered a Thinkpad X120E with an AMD Fusion (Zacate) chipset. I am eyeballing an SSD for it, however newer SSDs are coming out with 6Gbps SATA interfaces. I doubt such a cheap laptop has 6Gbps SATA, but I'm debating waiting the a bit longer until the Intel 510 series come out, if anything to future proof myself by putting it in this laptop and then later on when I do upgrade to a laptop with 6Gbps SATA I'll be good to go. The hardware manual mentions that the motherboard is for a "AMD Fusion E-350" but the specifications of each hardware part isn't part of the manual. Does anyone have any information on the kind of SATA controllers in Fusion laptops so I can make a better purchasing decision?

  Read the article

• Apache: Use Specific Applicaion for CGI scripts

  - by RandomInsano

  I have two servers, one in production and one for development. The production server is Solaris, dev is FreeBSD. Because of this, python is installed in different directories. I'm using Python right now for making CGI scripts, and needing to remember to swap my hashbangs when I copy from dev to production is a little annoying (Same issue for SVN updates depending on which server I'm comitting from). Is there a way to configure apache so that I no longer need to hashbangs? Like, if it would lauch python and supply the CGI script for it? Might be a bit of a stretch, but no harm in asking

  Read the article

• rsyslog appears to act on old configuration

  - by Jeff Lee

  I'm using a template to dynamically generate rsyslog filenames. I've made some changes from my original format, but rsyslog still appears to be using both the new template and the old after restarting. My filename template went from this: $template RemoteDailyLog,"/var/log/remote/%hostname%/%$year%/%$month%/%$day%.log" To this: $template RemoteDailyLog,"/var/log/remote/%hostname%/%fromhost-ip%/%$year%/%$month%/%$day%.log" I stopped rsyslogd using service rsyslog stop, deleted all of my log files using rm -rf /var/log/remote/*, and then restarted rsyslogd with service rsyslog start. The problem is rsyslog seems to be building folder structures of the type "/var/log/remote/%hostname%/%$year%/%$month%/%$day%.log" (i.e., without the remote IP), which no longer appears anywhere in my configuration. Is it possible that old log or config data have been cached somewhere and are being preserved through the server restart? This is creeping me out a little.

  Read the article

• Apache - mod_pagespeed freezes my website

  - by Jonathan Rioux

  I have installed the mod_pagepseed module for Apache. I am using Debian so I downloaded the .deb file, and installed it successfully. I then configured some filters, and it worked like a charm for some minutes. Then after something like 10 minutes, my website no longer responded to the requests. When I was requesting for my website, it said "Waiting for www.blablabla.com" and I never got the page back from the server. I checked the processes running on my Debian box with top -d 0.5, and nothing eats up the CPU. To make my website responding to requests again, I must do a /etc/init.d/apache2 restart. And then it works again with mod_modspeed applying it's filters for a couple of minutes, and no more response again. How can I diagnose this issue? Is there some other configurations in the mod_pagespeed.conf file that I must set?

  Read the article

• Running .NET app from network share in Win 7?

  - by mlangille

  We have a .NET 1.1 application that we keep on a netowork share. We install the .NET Framerwork to the local PCs and also set the full trust via the following: %windir%\Microsoft.NET\Framework\v1.1.4322\caspol -pp off -cg LocalIntranet_Zone FullTrust This has worked fine on all PCs to date however now we have a few new PCs with Win7 and the process no longer is working. The app will run fine from a local drive in Win7 but running the networked copy results in a general exception error. Any ideas on how to get this to work under Win7?

  Read the article

• Is it possible to use the IE10 App without making Internet Explorer the default browser?

  - by nhinkle

  Windows 8 comes with two versions of Internet Explorer: the normal desktop version, which looks just like IE9, and the Modern UI version, which is a full-screen tablet-style app. By default, links opened in desktop mode open in desktop IE, and links opened in Modern UI apps open in the full-screen app. When you set a new default browser (like Google Chrome, which has a Modern UI mode now), you can no longer access IE10 in the Modern UI at all - the tile disappears from the start screen, and there's no way to manually invoke it. I don't use IE10 much, but I'd like to have access to it in Metro mode, because it's handy for testing things out. I don't want to have IE be my default browser though. Is there any way to get the IE10 "App" to show up without setting IE to be the default browser everywhere?

  Read the article

• recovering a broken GNOME-desktop in debian wheezy

  - by morgon

  an hour ago I had a working gnome-desktop on my debian system (thinkpad x121e). Then I installed compiz that crashed. After a reboot the gnome-desktop no longer started. Then I did some upgrades with aptitude, all gnome-packages seem to be there, but it is still not working. On startup I get a login-dialog, when I login there is no desktop, only some window-manager running that allows me to start a terminal. When I run "gnome-session" I get the error message "failed to load session "gnome". So how do I get back to a working desktop? I have tried "tasksel install gnome-desktop --new-install" but that just displays a progress window that after half an hour still shows 0%. Can someone help me please? I have tried "

  Read the article

• When browsing a specific network share remotely, Windows Explorer continuously jumps back to the parent folder

  - by Evil Pigeon

  I am accessing a specific network path on another domain. It looks something like this: \\CoputerName.OtherDomain.in\c$\Inetpub\Testing\Website\ In under 30 seconds, I am automatically jumped back to \\CoputerName.OtherDomain.in\c$\Inetpub\Testing\ In less time it then jumps back to \\CoputerName.OtherDomain.in\c$\Inetpub\ Then it jumps back to c$ for its final resting place. \\CoputerName.OtherDomain.in\c$\ At first I thought this had to with a faulty keyboard, but this behaviour also occurs when the window does not have focus. It's as if windows thinks that the folder no longer exists (as in someone else has deleted or moved it). This behaviour is not specific to my PC either, it occurs from other machines in the office. Edit: It looks like this issue only occurs from other Windows 7 machines. There are no issues accessing the path from XP.

  Read the article

• Looking for alternative to NetNewsWire and Google Reader

  - by Janine Sisk

  I have used NetNewsWire on both Mac and iPhone for years, and have been reasonably happy. Unfortunately the latest version of NNW for Mac, which I just upgraded to, now matches Google Reader's policy of marking items read after 30 days. The older version I had been using did not do this. I regularly keep unread items for way longer than 30 days, and do eventually read them, so this is a major bummer for me. The iPhone version has behaved this way forever, but I was ok with that as long as I had the full list on my desktop. Keeping in sync between the iPhone and Mac is very important, so I need to find another online solution with clients available on both sides. I've done a little digging but haven't found much; it seems like Google has pretty much taken over this space. Any suggestions?

  Read the article

• How to see whats taking up space on your hard drive

  - by sam

  Im thinking of switching to one of the macbook pro retinas with a 256gb ssd, im making the move from a 512gb hd, which at the moment is split into a 60bg windows partition (which i dont think im going to have on my new machine) and a 440gb main partition of the main partition ive got 140gb free. So all in if i disregard the 60gb windows part ive got about 200gb free so im using 300gb, which is still a bit to much, ive had this machine 4/5 yrs so its likely to be clogged with files that i no longer need, is there a tool that i can use to view my current hd and see whats taking up the most room, so i can begin to see where i can cut down ? just for a bit of background my current machine runs osx.

  Read the article

• Restarted computer, now wireless and Visual Studio is broken

  - by Earlz

  I installed the new update for TortoiseSVN which requires a restart. Upon restarting a lot of things broke. I'm currently running a virus scan, but what would cause this? Among the things that no longer work is Visual Studio. It now says "Invalid License Data. A reinstall is required" and my wireless internet does not work. When I go to connect to my network it will say "Can not connect" and then when I diagnose the problem it says "The connection to accesspoint-name was cancelled" (and yes, canceled is misspelt like that) What could have caused this? My computer did not install any updates or anything like that upon restarting and it was running fine before I restarted it.

  Read the article

• Sendmail Alias for Nonlocal Email Account

  - by Mark Roddy

  I admin a server which is running a number of web applications for a software dev team (source control, bug tracking, etc). The server has sendmail running solely as a transport to the departmental email server over which I have no control. We have someone who is still in the department but no longer on the dev team so I need to configure the transport agent to redirect all outgoing email (which would be coming from these applications) to the person that has taken their place. I added an entry in /etc/aliases like such: [email protected]: [email protected] But when I run /etc/init.d/sendmail newaliases I get the following error: /etc/mail/aliases: line 32: [email protected]... cannot alias non-local names So clearly I'm doing something I shouldn't. Is there a way to get aliases to work with non-local names or alternatively is their a way to accomplish my goal of redirecting outgoing mail for this user to another one? Technical Specs if the matter: Ubuntu 6.06 sendmail 8.13 (ubuntu provided package)

  Read the article

• Attempting to caue packet loss with netem doesn't work - possibly because of NAT (but delay does work)

  - by tomdee

  I have traffic from a WIFI access point routed via an Ubuntu box. I have two network interfaces which are NATed *filter :INPUT ACCEPT [11:690] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [37:6224] -A FORWARD -s 192.168.2.0/24 -i eth1 -o eth0 -m conntrack --ctstate NEW -j ACCEPT -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT COMMIT # Completed on Thu Mar 15 13:37:21 2012 # Generated by iptables-save v1.4.10 on Thu Mar 15 13:37:21 2012 *nat :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -j MASQUERADE COMMIT If I run a ping app on an Android device connected to the WIFI network I can happily ping google. If I use netem to introduce some delay tc qdisc change dev eth0 root netem delay 100ms I can clearly see pings taking longer. If I use netem to introduce some packet loss tc qdisc change dev ifb0 root netem loss 50% then I see no change. Packet loss does work fine for locally generated traffic, just not for traffic coming in over the network that's being NATed. Any ideas how to sort this out?

  Read the article

• SQL Server 2008 R2 Replication log reader could not execute sp_replcmds

  - by user49352

  This log reader agent worked perfectly for several months until the user referenced in the error was removed from the domain. After that time the error 'The process could not execute 'sp_replcmds' on 'SERVER'' was received with more detail 'Could not obtain information about Windows NT group/user' that referenced said user. This user was referenced nowhere in the the log reader agent other than the Publication Access List from which it was subsequenctly removed. The agent would still not successfully start up. The simple problem here, I believe, is that the log reader agent was created under that user and that no longer exists in the domain. Is there an 'owner' somewhere that needs to be changed? Every other function on the database continues to execute successfully. Any other help or thought would be appreciated.

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >