Search Results

Search found 19928 results on 798 pages for 'multiple constructors'.

Page 89/798 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• three monitors with radeon 5870 on 1920x 1080

  - by antoniocs

  Hey! I have 3 monitors, 2 24 inch and one 22 inch. The max resolution of the 24 inch monitors is 1920 x 1080 and the 22 is a bit less (can't remember right now). I read Jeff's post about the display port adapters and I was wondering if passive adapter would do the trick since neither of the monitors have big resolutions. Thanks

  Read the article

• Both screens always stay on after adding second monitor

  - by J.Merrill

  I had a single 1920x1080 monitor on a Windows 7 desktop PC and, per "power management" (not screen saver), the screen would go blank after 10 minutes. I added another monitor (2560x1600 if that matters) and since then, neither screen has ever blanked. I've tried turning on the "blank" screen saver, but that didn't help either -- I can go away for hours and when I come back, both screens are on. I've seen others with similar issues apparently caused by e.g. wireless mice that seem to move infinitesimally, but I've got the same wired mouse I had before. I can't understand why neither the screen saver nor power management is doing what it should to blank the screens, when "power management" used to do it when there was only one monitor. Maybe it doesn't matter so much with current LCD display technology (no "burn in") but doesn't a monitor use more power when "power management" hasn't turned off the display? Thanks for any suggestions.

  Read the article

• Triple monitor setup in linux

  - by Brendan Abel

  I'm hoping there are some xorg gurus out there. I'm trying to get a three monitor setup working in linux. I have 2 lcd monitors and a tv, all different resolutions. I'm using 2 video cards; a 9800 GTX and 7900Gt. I've seen a lot of different posts about people trying to make this work, and in every case, they either gave up, or Xinerama magically solved all their problems. Basically, my main problem is that I cannot get Xinerama to work. Every time I turn it on in the options, my machine gets stuck in a neverending boot cycle. If I disable Xinerama, I just have three Xorg screens, but I can't drag windows from one to the other. I can get the 2 lcds on Twinview, and the tv on a separate Xorg screen no problem. But I don't really like this solution. I'd rather have them all on separate screens and stitch them together with Xinerama. Has anyone done this? Here's my xorg.conf for reference. p.s. This took me all of 30 seconds to set up in Windows XP! p.s.s. I've seen somewhere that maybe randr can solve my problems? But I'm not quite sure how? Section "Monitor" Identifier "Main1" VendorName "Acer" ModelName "H233H" HorizSync 40-70 VertRefresh 60 Option "dpms" EndSection #Section "Monitor" # Identifier "Main2" # VendorName "Acer" # ModelName "AL2216W" # HorizSync 40-70 # VertRefresh 60 # Option "dpms" #EndSection Section "Monitor" Identifier "Projector" VendorName "BenQ" ModelName "W500" HorizSync 44.955-45 VertRefresh 59.94-60 Option "dpms" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nvidia" BusID "PCI:5:0:0" BoardName "nVidia Corporation G92 [GeForce 9800 GTX+]" Option "ConnectedMonitor" "DFP,DFP" Option "NvAGP" "0" Option "NoLogo" "True" #Option "TVStandard" "HD720p" EndSection Section "Device" Identifier "Card2" Driver "nvidia" VendorName "nvidia" BusID "PCI:4:0:0" BoardName "nVidia Corporation G71 [GeForce 7900 GT/GTO]" Option "NvAGP" "0" Option "NoLogo" "True" Option "TVStandard" "HD720p" EndSection Section "Module" Load "glx" EndSection Section "Screen" Identifier "ScreenMain-0" Device "Card1-0" Monitor "Main1" DefaultDepth 24 Option "Twinview" Option "TwinViewOrientation" "RightOf" Option "MetaModes" "DFP-0: 1920x1080; DFP-1: 1680x1050" Option "HorizSync" "DFP-0: 40-70; DFP-1: 40-70" Option "VertRefresh" "DFP-0: 60; DFP-1: 60" #SubSection "Display" # Depth 24 # Virtual 4880 1080 #EndSubSection EndSection Section "Screen" Identifier "ScreenProjector" Device "Card2" Monitor "Projector" DefaultDepth 24 Option "MetaModes" "TV-0: 1280x720" Option "HorizSync" "TV-0: 44.955-45" Option "VertRefresh" "TV-0: 59.94-60" EndSection Section "ServerLayout" Identifier "BothTwinView" Screen "ScreenMain-0" Screen "ScreenProjector" LeftOf "ScreenMain-0" #Option "Xinerama" "on" # most important option let you window expand to three monitors EndSection

  Read the article

• How to switch off the monitor when mouse reaches the edge of the screen?

  - by evgeny9

  I have 2 computers at home (Windows XP and Windows 7), but one monitor for both of them. They are connected to this monitor using different interfaces: DVI and VGA. I'm also using one keyboard and one mouse to control both PCs with the help of Synergy or Input Director. But I still need to manually switch between monitor interfaces. I wonder, if there's some way (software) that will switch this interfaces (turn off the monitor), when reach the edge of the screen with the mouse. Until now I found several answers, which help to avoid pressing hardware buttons, but still can not do the job automatically based on mouse pointer coordinates. Thank you.

  Read the article

• Setting up a copy of a site with IIS 7?

  - by SJaguar13

  I have a site running on IIS with a dyndns.org domain that points to the IP of the Windows 2008 machine hosting it. I need a copy of that site for development purposes. I set up another folder with all the files, and create a new site in IIS. I don't really have a domain for it, so I was just going to use the IP address. When I go to localhost, 127.0.0.1, or the internal IP, I get bad hostname. If I use the IP address on port 80 (the same as the real version of the site), I get 404 not found. If I use a different port so I don't have them both on the same IP with the same port, I get connection timed out. How do I go about setting this up?

  Read the article

• IIS6 can't find site on local network

  - by chezy525

  I have a windows 2003 server with dual NICs running IIS6. I can access everything remotely, but the internal network can't seem to find the site regardless of which IP Address I try to go to. There are really several weird things that are happening here, but I'm going to limit this question to what I'm guessing to be the simplest problem (the solution to which I'm hoping solves other things as well): From the server itself, I can access the webpage using the primary IP address (i.e. http://192.168.1.2/index.htm), but not using the secondary IP address (i.e. http://10.10.10.2/index.htm). Self pinging both IP addresses works, and the "Web site identification" in IIS has the IP address set to "(All Unassigned)"... which I believe should bind both IP addresses to this site. I apologize if I'm not providing enough details about my setup, but at this point I don't even know what's relevant...

  Read the article

• How can use mod_rewrite to redirect a multiple specific URLs containing multiple query strings?

  - by Derek

  Hi there folks, we recently migrated a site from a custom CMS to drupal. In an effort to preserve some links that our users bookmarked (we have about 120 redirects) we would like to forward the original URLs to a new URL. I have been searching for a couple days, but can't seem to find anything simple to what I need. We have existing URLS that contain one or more query strings, for example: /article.php?issue_id=12&article_id=275 and we would like to forward to the new location: http://foobar.edu/content/super-happy-fun-article I started using: RewriteEngine On RewriteRule ^/article\.php?issue_id=12&article_id=275$ http://foobar.edu/content/super-happy-fun-article [R=301,L] This, however, does not work. A simple RewriteRule works: RewriteRule ^test\.php$ index.php It is unclear to me how I need to use {QUERY_STRING} with multiple Basically it's 120 simple redirects that go from one existing URL to a new one. I don't need ranges [0-9], because there is no sequential order to existing URLs. Perhaps I can do what I need with RewriteMap and a simple text file that contains a line like this: index.php?issue_id=12&articleType_section=0&articleType_id=65 http://foobar.edu/category/fall-2008 If anyone has any idea on using mod_rewrite to accomplish this or if there is a better, or more simple mod, I am open to that as well. Thanks!

  Read the article

• DIrect videos and slideshows fullscreen from another display

  - by neurino

  I have 3 displays: 1 control display I can see 2 40" Full HD displays I can't see my need is to play videos and presentations fullscreen on the two 40" screens while being able to control them from the control display. So far I am able to achieve this with a cumbersome set of keyboard shortcuts like: open VLC on control display send to left display with Win + Shift + Left go fullscreen with f and more combinations to restore, get VLC on control display etc. This is really error prone and not professional. Also I wish I have a media player and a slideshow player that can: send the same video / slideshow to the two 40" displays at the same time send two different videos / slideshows, one each 40" display having all controls on the central display, the only one I can see. Any advice welcome, thank you for your support.

  Read the article

• Windows 7, how to get unlock (Press Ctrl+Alt+del) prompt on all monitors?

  - by Zugwalt

  I have a laptop that I keep shut in a docking station as I have two screens connected to the laptop and it cannot display to both of those AND its own screen. However, when my computer locks by itself (Not when I lock it using Ctrl+Alt+Del) the login prompt is ONLY on it screen (at least its there when I open it up) and my primary external monitor is off and my other one is all black. This means to log in I have to hit Ctrl+Alt+Del and blindly enter my password--which I don't mind too much, but would prefer if I could actually see the unlock/login prompt instead of typing on a black screen. Any way to have it show the login prompt on all monitors?

  Read the article

• How do I move an Amazon micro instance to a small instance?

  - by Navetz

  I want to move my instance to a micro instance to a small instance but when I try to launch a new AMI based on my Micro instance AMI it only gives me the option for 64 bit instances. My initial ami is based off an ubuntu 10.04 image. Is it not possible to move between 64 bit and 32 bit instance? Would it be possible to use a load balancer to have a 32bit instance and a 64bit instance work together? I have a website/web app that I will be uploading huge volumes of data to. I will be starting with 65gigs of images and then moving up to 100+ gigs of images. I am not sure which instance type would be best for this. I was going to use a load balancer and auto scaling to increase the number of instance when the load is high. Also when using a load balancer, does one of the AMI instance become the primary image and the rest act as clones of it?

  Read the article

• Maximum number of monitors Win 7 Supports?

  - by cpuguru

  I want to set up a system with (9) monitors arranged in a 3x3 grid. Is this configuration possible with Windows 7? Does it max out at a set number of monitors? Any suggestions about known working hardware combinations would be much appreciated. Currently considering (3) nVidia Quadro NVS420 cards to drive the array.

  Read the article

• Can I get 4 screens running on an ATI Radeon HD 5700 series video card?

  - by Wayne

  I have successfully run 3 displays using the 5700, but i want to run a 4th screen off the HDMI Port. Mainly I would like it to Mirror the primary monitor onto the TV connected to the HDMI Port. Any help at all would be greatly appreciated. I can get a signal to it, i just have to disable one of my original 3 monitors. Im not willing to do that. So other than disabling one of my monitors, does anyone have any suggestions?

  Read the article

• What to do with spare USB thumb drive?

  - by Brandon

  Just got a new USB thumb drive and now have a spare 8GB one laying around. Just curious as to what people do with their spare ones.

  Read the article

• Xinerama 3 displays can't have main display in the middle

  - by mononym

  I have 3 monitors running on 2 cards, they are all working as 3 seperate displays, however, if i move the main display from the left (0,0) i cannot drag to the left window as the mouse goes crazy and crashes my system (i have to restart x) I would much prefer my main display to be in the centre. Any help appreciated

  Read the article

• How to get monitor resolution of 1680x1050 using ATI Radeon HD 2600 PRO in a dual monitor setup

  - by user7651

  I have Sapphire ATI Radeon HD 2600 PRO graphics card in my Windows Server 2008 x64 machine. It has two outputs a VGA and a DVI. I have connected the DVI to my Dell 24" monitor with 1900x1200 resolution and it works 100%. The VGA I have connected to my second monitor a Samsung 22" with native resolution of 1680x1050. But the ATI driver and Catalyst control centre doesn't show this resolution as an option. If I choose a lower resolution like 1280x1024 it looks really bad and fuzzy. I searched in google and downloaded the powerstrip tool that allowed me to create a custom resolution of 1680x1050 and then this option shows up in Catalyst control centre and my 2nd monitor works fine now. But I don't want to pay for an application to choose a display resolution. Why doesn't ATI show me that option by default even though it has no problem in actually supporting the display at resolution. Is there a way to get 1680x1050 resolution using ATI drivers only ?

  Read the article

• How to move mail accounts when migrating webhosting

  - by pkswatch

  I am migrating my website abc.com from one webhosting company to another in a shared hosting environment. Both have cpanel. And the second hosting account i am preparing to move is my multi-domain hosting account with 3 domains already in it. The problem is, i have many email accounts associated with my website abc.com, which are accessed using webmail. So if i move it to the other host, will i lose all those accounts and their emails? If yes, then how should i synchronise the email accounts so that all the accounts and the contained emails remain intact? I saw some several sync tools like IMAP Sync, etc. But these require two hosts while synchronizing, and as you see, i have just one domain name to be synchronized over 2 servers. PS, i do not have any ssh access on either of them, and i have made complete backup of all files using backup wizard in cpanel.

  Read the article

• Third monitor with AMD cards WITHOUT Eyefinity

  - by Resorath

  I have two AMD Radeon HD 6870 video cards in CrossFireX configuration and I would like to add a third monitor. I understand to use "Eyefinity" you need to use an active mini displayport to DVI adapter. I am not interested in the benefits of "Eyefinity", I just want a third monitor with Windows extended desktop. Is it possible to use either the HDMI head on the first card or the DVI heads from the second card to get a third monitor running without "Eyefinity" and an active adapter?

  Read the article

• If I run two monitors from two different graphic cards, can I still have Twinview?

  - by rumtscho

  I am planning to get a second 2560x1440 monitor for home. The trouble is, I only have 1xDVI, 1xVGA on my graphics card (a 250 GT). I don't want to buy a new graphics card until the prices for the 500 series have stabilized, so probably not before summer (or will it happen earlier? I don't remember how it was for other series, and I couldn't find long-term price history for video cards). The solution I had in mind is to get the 7600 GS from my old PC, which also has 1xDVI, 1xVGA, and run each monitor on a separate card. I have never done that, and I was wondering 1. If I will be able to run the monitors in Twinview then, or will I be stuck with separate X sessions, and 2. Whether there are some other disadvantages as compared to a single-head graphics card. (I am using the proprietary driver because I need compiz). As an aside, how do I find out whether the DVI port on the old graphics card is dual link?

  Read the article

• How can I get mouse capture to work in virtualbox when I move guest window to second monitor?

  - by Dan

  I'm running VirtualBox on a Win7 host. Guest OS is Centos. My setup is a laptop (screen 1) with a huge external monitor (screen 2). I'm only telling Centos there is one monitor though. When I start up VirtualBox on screen 1, the mouse capture works fine. I don't have mouse integration because (I think) the kernel on Centos is too old to support it. That's fine, I don't mind doing the Right-Control thing. The problem I have is that when I drag the whole VM window over to my second monitor, the mouse capture doesn't work right anymore. I click inside the VM and can move the VM cursor a little bit, but I can't always get to the edges of the VM screen -- before I get all the way to an edge, the cursor will escape from the VM as if I had hit right-control. But it's still captured according to the icon, and if I then hit right-control, the guest cursor jumps to a different screen location. My workaround: if I have the VM window mostly on screen 2, but a small corner of it still on screen 1, then the mouse capture works correctly. Is there a setting to make this work better?

  Read the article

• Splitting an HTTP request into multiple byte-range requests

  - by redpola

  I have arrived at the unusual situation of having two completely independent Internet connections to my home. This has the advantage of redundancy etc but the drawback that both connections max out at about 6Mb/s. So one individual outbound http request is directed by my "intelligent gateway" (TP-LINK ER6120) out over one or the other connection for its lifetime. This works fine over complex web pages and utilises both external connects fine. However, single-http-request downloads are limited to the maximum rate of one of the two connections. So I'm thinking, surely I can setup some kind of proxy server to direct all my http requests to. For each incoming http request, the proxy server will issue multiple byte-range requests for the desired data and manage the reassembly and delivery of that data to the client's request. I can see this has some overhead, and also some edge cases where there will be blocking problems waiting for data. I also imagine webmasters of single-servers would rather I didn't hit them with 8 byte-range requests instead of one request. How can I achieve this http request deconstruct/reconstruction? Or am I just barking mad?

  Read the article

• Dual Monitors Switching While Running Full-Screen Game?

  - by Phil Sandler

  I have a dual-monitor setup, and currently I can run a full screen game (Warcraft 3 and Starcraft 2 currently) and see still see anything I have open on my second monitor. I can't move my mouse from one monitor to the other, which is a good thing. However, I would like to know if it's possible to press some key combination and "release" my mouse control from the full screen game to my second monitor without the game minimizing (which is what happens when I ALT - Tab).

  Read the article

• Multi-monitors and the corners of the screen

  - by Neil Barnwell

  I currently have two monitors (let's call them "left" and "middle" - you'll see why in a sec), and would love three (let's call it "right"). However, I often will throw the mouse-cursor up to the top-right corner on "middle" because for a maximised window that's where the close button will be. If I add the "right" monitor, the mouse cursor will just carry on off "middle" into "right", and aiming for the close button on "middle" will become more difficult. I'm currently using UltraMon 3.10, but does anyone know of a way to get the mouse to stick to the corners, so that it doesn't go off into the other monitor (Synergy allows this by configuring the "gap" where the mouse is allowed to travel from monitor to monitor).

  Read the article

• How do I mirror a monitor in Windows Vista?

  - by Rylar

  How do I mirror a monitor in Windows Vista? I do not want to "extend" the desktop to the monitor, but I want the second monitor (a TV in this case) to be an exact copy of the main monitor.

  Read the article

• ssh Password-less login to multiple machines when you already have one

  - by tandu

  I'm a little bit confused about setting up a password-less login for multiple machines to begin with, but I think I could do it from scratch. The problem is I already have it set up for one machine and I don't want that to be blown away when I try to set it up for the other machine. Let's clarify: Machine A: the machine I'm connecting from Machine B: the machine I'm connecting to. Password required Machine C: the machine I'm connecting to. Password-less ssh I have read some tutorials on setting up password-less ssh to a certain site, but they usually start with "move id_rsa out of the way so it doesn't get blown away," but then at the end of the tutorial it's not moved back. If I had no help at all, here is what I would do: Log into B ssh-keygen -t rsa -f ~/id_rsa.other scp id_rsa.other.pub A:~/.ssh echo "Host A \n Identity File ~/.ssh/id_rsa.other" > ~/.ssh/config (Note that I realize these commands may not be exactly correct, but this is just the idea). What I'm not quite clear on is if I need to update the config for A, B, or both. I'm fairly certain to do a password-less login from A to B, it is A that needs the public key .. but I also suppose I need B to use the correct id_rsa file for that public key. Finally, I don't want the password-less login for C to be affected at all .. it's using id_rsa. Am I going wrong anywhere?

  Read the article

• Monitors go to sleep and come back blue

  - by TahoeWolverine

  Recently, my displays have been turning blue when they wake up from sleep. This has hapeened on my Macbook and on my 2nd monitor on my PC (which I use for VM and remote desktop). It's possible that part of it might be my eyes, but seeing the blue monitor next to my other monitor on my PC has convinced me that something is probably out of place. What might that be?

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >