Search Results

Search found 22250 results on 890 pages for 'multiple instances'.

Page 89/890 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• Second video card (PCI) under Windows 7

  - by dbkk101

  I'm trying to get an old PCI video card (Diamond Stealth 2500) along with a normal PCI-E video card. In BIOS, there is a setting to switch between PEG/PCI or PCI/PEG on startup (PEG is PCI-E Graphics). When I use PCI/PEG only the old PCI card works, when I use the other one, only the new PEG card works. In PEG/PCI mode, Windows 7 recognizes the card and shows it in Device Manager as Standard VGA adapter, but it shows a warning for the device ("This device cannot start. (Code 10)").

  Read the article

• Can two Identical devices be present on the same bus in any PCI Topology

  - by vaibbhav

  As per the PCI standard, devices are identified on the basis of Vendor Id, Device Id and the bus no. All devices of same type have identical vendor id and device id. If I put two such devices on the same bus say bus 0. How will the PCI Software Subsystem distinguish between the two? If such a case is not possible in PCI, then can such thing be possible through PCI Express Switch?

  Read the article

• Ubuntu Lucid: Erratic screen behaviour after boot

  - by fgysin

  In short: about 50% of the time I have a screwed up monitor setup after reboot. About 50% it is totally correct. Now the longer version: I updated my machine from 9.04 to 10.04 (via 9.10). At first I run into some monitor problems (I have a 3-monitor setup) because of the known bug in the new xserver driver for xinerama. This messes up behaviour if the mouse goes either left or above the screen number 0, i.e. I had to make my left-most monitor screen 0. Everything worked out fine finally, I got my 3-monitor setup back with xinerama enabled to get one big desktop streched over 3 screens. Now the fun part: Every time I start up my machine only one of the 3 monitors gets a signal and is woken up: it only recognizes the left-most monitor (screen 0) and crams all the desktop stuff into this one screen. If I go into nvidia settings I only see one physical device although all 3 are connected and have power. When I look into the xorg.conf I can still see my old setup with 3 devices, 3 screens, xinerama active etc... But I was totally unable to get 3 montitors to work. (I tried unplugging monitors, reconfiguring whole nvidia setup, ...) But it gets even better: When I restart my machine (i.e. choose the restart option from the Ubuntu menu) it shuts down and tries to restart. The restart then gets stuck after showing the Ubuntu splash screen with the 'loading bar' (the moving dots thingy) and I am forced to kill the machine by cutting power. But after the power cut the machine boots up normally and suddenly I get my 3 monitor setup back up working. That is until the next time I shut down and start up, where it all starts over again and I only have one monitor... (see above) I really have a hard time seeing where the error is. It must be that the restart boot somehow differs from the 'normal' boot. But the fact that it gets stuck and I need to cut power which then basically triggers a 'normal' boot does not really support this theory... My setup (please tell me if you need further info): 3 monitors as 3 screens as one desktop (with xinerama) 2 nvidia cards where screen 0 and 1 are on card 0 and screen 2 is on card 1 Ubuntu 10.04 Lucid Lynx (updated from 9.10, 9.04, ....) I would appreciate every idea on the subject, at the moment I really don't have any clue what to do...

  Read the article

• How do I enable an extended desktop across two monitors in Knoppix 6?

  - by Janice

  I want to have an extended desktop that spans two screens, but Knoppix's monitor settings only allow me to mirror but not create an extended desktop. I'm not very good with the command-line but I know how to use apt-get. Is there some package I can download to do this?

  Read the article

• Laptop VGA Out Stopped Working

  - by Jack7890

  I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

  Read the article

• Install grub on 2nd hard drive

  - by jldupont

  I have 2 HDs in my machine: Drive 1 with grub and my Windows XP OS Drive 2 with only Ubuntu 9.04 I would like to be able to boot directly from drive 2. I am missing grub on drive 2... how do I add it? EDIT: I ended up reinstalling the whole OS.

  Read the article

• Is this a solution for having multiple SSL certificates on the same IP

  - by Saif Bechan

  I am running CentOS running on a VPS. I read some guides on having multiple SSL certificates on the same system, but I can not get the basics to work. The guide I got that makes the most sense to me is the doing the following. In CentOS I can make virtual NIC's. So I made 2 virtual NIC's to start with. 192.168.10.1, 192.168.10.2. Now I work in ISP manager Pro, so this is listening on my primary ip 1.1.1.1 For each website I have them listening on 192.168.10.1:80, 192.168.10.1:443 In the hosts file I made the following 2 entries 192.168.10.1 1st.com 192.168.10.2 2nd.com Now the strange thing is that when I browser to 1st.com I do not get the website located at 192.168.10.1, I get the website located at my prim IP 1.1.1.1 Should I do something like forwarding or routing for this setup to work? And the basic question: Will this setup even work? Are the SSL certificates based on the IP adress, or are the based on the host name, 1st.com and 2nd.com.

  Read the article

• Monitor occasionally doesn't display properly

  - by homestead

  Hi, I am using dual monitors, and this behavior has occured on 2 different computers (using the same monitors). When I turn the monitors off, and then on again after a while, 1 monitor turns on, displays the Dell logo etc. but doesn't display the windows login. It is just a blank page, and then the green light turns orange. Turning it on/off many times or just waiting a while eventually results in it working again, but I am very confused why!

  Read the article

• 3 Monitors 2 different graphic cards

  - by Michael

  I am looking to add a third monitor to my workstation. I currently have 2 monitors connected to a geforce gt 120. I am wanting to find the cheapest solution on adding another monitor, I have a old ati x300 laying around and wanting to know if I would be able to use that to power the other monitor and if it would conflict with my other graphic card (I am not a gamer). What I want to do is have the at x300 power 1 monitor via dvi and the gt 120 power 2 monitors via vga and dvi. Thanks edit: im running windows 7 64bit

  Read the article

• What's problem with multi monitor usage in rdc7?

  - by e-turhan

  Hello, I want to use dual monitors with remote desktop on windows 7 ultimate. Host machine is win server 2008 r2. I open the run window type mstsc /multimon and press enter, also "use all my monitors for the remote session" is checked.By this way RDC is opening but only in one monitor.Do I need to do any changes on host too? I have tried /span attribute and it worked but I don't want it.

  Read the article

• FTP client that supports 2 concurrent FTP sessions

  - by oninea

  I'm looking for an FTP client that can connect to two different FTP servers at the same time and allow file transfer or synchronization between those two servers. Basically what I want to achieve is to transfer/synchronize files between 2 different sites from my local machine. Are there any clients around that support this functionality? If there are none, is there an alternative to achieve this? I've taken a look at net2ftp, a web based FTP client, which provides almost the same functionality that I need. What I'm looking for though is a desktop app. Any ideas?

  Read the article

• Laptop VGA Output Stopped Working

  - by Jack7890

  I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

  Read the article

• Multiple WAN interfaces on SonicWall TZ 100?

  - by Chad Decker

  I'm using a SonicWall TZ 100 with a basic configuration of X0 for the LAN and X1 for the WAN. The WAN uses DHCP to obtain its routable IP address. I want to obtain a second routable IP from my ISP. I'm in luck because my cable company will provide me with an additional dynamic IP for $5/mo. How do I bind this IP to my SonicWall? My additional dynamic IP will not be consecutive to the original one. It won't even be on the same class C. I think what I want to do is to use one of the empty ports/interfaces (X2, X3, or X4), tell that interface to use DHCP, and then add that interface to the WAN "zone". I can't figure out how to do this though. Here's what I've tried so far: (1) I've looked in Network Interfaces. I see X0 and X1 but the other unused interfaces don't show up. I don't see an "Add" button to add the new interfaces. (2) I've looked in Network Zones. I see that X0, X2, X3, X4 are in the LAN zone. I tried to drag X3 into the WAN zone but I can't. Nor does clicking the "Configure" button allow me to move an unused interface from LAN to WAN. (3) I've read the post entitled Splitting up multiple WAN's on Sonicwall. This doesn't seem applicable to me. Any thoughts?

  Read the article

• Why Does My iMac Keep Setting the Screen Brightness to 'Full'?

  - by TomB

  I have a 2 week old 24" iMac running Mac OS X 10.6. It is the primary monitor with the menu bar on the top of display. I have an external monitor as well, a 19" Viewsonic LCD. The LCD is set to the left side of the iMac, rotated 90 degrees CCW and has the Dock along the far left edge. When I restart the screen brightness on the iMac reverts to Full brightness. The Viewsonic LCD retains the setting I have for it. I am using a Mini DVI to DVI cable for the external display. I even tried setting my Huey Pro to do automatic screen adjustment based on ambient lighting but the iMac still goes to stun with a reboot. I am sure it is something dumb I have overlooked.

  Read the article

• How to quickly switch monitors on multi-monitor setup?

  - by Saxtus

  At my desktop PC, I have 3 displays hooked up on my Palit GeForce GTX 480 to extend my desktop: DVI: Samsung SyncMaster T220 (22" 16:10, 1680x1050, as my main) DVI: Samsung SyncMaster 940BF (19" 4:3, 1280x1024) HDMI: Sony Bravia KDL-32D3000 (32" 16:9, 1360x768) As expected, the GFX card can only utilize 2 of the displays at any given time, so I have to manually switch using Windows' "Display Properties" dialog, each time I want to switch between them. I've tried UltraMon, DisplayFusion and PowerStrip (so please don't refer me to a question where those are given as solutions) but they are unable to switch monitors. Instead they can only change display resolutions and settings on the existing active monitors, with specially weird results when I've saved the monitor states and then tried to switch monitors using the saved states! Any idea on how to bypass the awful "Display Properties" dialog and it's "confirm your change" timer?

  Read the article

• lighttpd with multiple IPs, each with a UCC certificate and many hostnames

  - by Dave

  I'd like to get lighttpd working with UCC certificates, but I can't seem to figure out the correct syntax. Essentially, for each IP address, I have one UCC certificate and a bunch of hostnames. $SERVER["socket"] == "10.0.0.1:443" { ssl.engine = "enable" ssl.ca-file = "/etc/ssl/certs/the.ca.cert.pem" ssl.pemfile = "/etc/ssl/private/websitegroup1.com.pem" $HTTP["host"] =~ "mywebsite.com" { server.document-root = /var/www/mywebsite.com/htdocs" } The above code works fine for one hostname, but as soon as I try to set up another hostname (note the same SSL cert): $SERVER["socket"] == "10.0.0.1:443" { ssl.engine = "enable" ssl.ca-file = "/etc/ssl/certs/the.ca.cert.pem" ssl.pemfile = "/etc/ssl/private/websitegroup1.com.pem" $HTTP["host"] =~ "anotherwebsite.com" { server.document-root = /var/www/anotherwebsite.com/htdocs" } ...I get this error: Duplicate config variable in conditional 6 global/SERVERsocket==10.0.0.1:443: ssl.engine Is there any way I can put a conditional so that only if ssl.engine is not already enabled, enable it? Or do I have to put all my $HTTP["host"]s inside the same $SERVER["socket"] (which will make config file management more difficult for me) or is there some entirely different way to do it? This has to be repeated for multiple IPs too (so I'll have a bunch of SERVER["socket"] == 10.0.0.2:443" etc), each with one UCC cert and many hostnames. Am I going about this the wrong way entirely? My goal is to conserve IP addresses when I have many websites that are related and can share an SSL certificate, but still need their own SSL-accessible version from the appropriate hostname (instead of a single secure.mywebsite.com).

  Read the article

• How do I stop panning on a monitor that supports a specific resolution?

  - by IronicMuffin

  Hi all, I've been battling this for a few days now. Any and all help is appreciated. I have a planar monitor with a native res of 1280x1024. At one point, I had used PowerStrip to override "something" and set the res to 1600x1200, and it worked great. I then installed new intel graphics drivers for my 86895g (or w/e model) video card, which screwed up whatever settings I had. If I set it to 1600x1200 this time, it would set the res correctly, but give me a 1280x1024 viewport and the screen would pan when the mouse got to the edges of the screen. Absolutely not useful. Ok, so I was limited to 1280x1024 now. W/e. Now...enter new video card with two video ports. I have two monitors now and the latest nVidia drivers. I decide to try to get dual 1600x1200 going...ended up screwing the original monitor up so much now that it's at 1280x1024, with a 1024x768 viewport and panning! Absolutely not usable now. So what I need, and I can't seem to find on any forums, is help doing one or more of the following: Clearing out all monitor/edid info out of the windows registry without corrupting the registry. Actually correctly override the EDID values and get my sweet res back. Some other way of getting back to at least dual 1280x1024 with NO panning. Note: My device manager shows 4 monitors for some reason. My registry shows entries for all sorts of monitors that have been hooked up to the machine over the years. It's making it difficult to debug. Experience with PowerStrip would be helpful. I've been mucking with Phoenix EDID designer and MonInfo as well, but I'm stumbling around in the dark with these. Windows XP SP2 nVidia GeForce 6200 nVidia drivers: v258.96 Monitor: Planar PL 1910M Thanks!

  Read the article

• Walkthrough/guide building aplication server for multi tenant web app [on hold]

  - by Khalid Adisendjaja

  The web app will detect a subdomain such as tenant1.app.com, tenant2.app.com, etc to identify tenant environment, each tenant environment will have a different database credential (port,db name,etc) but still connecting to the same database server. Each tenant should use app.com for their main domain, using their own domain is prohibitted. Each tenant will have their own rest api endpoint such as tenant1.app.com/api/v1/xxxx, tenant2.app.com/api/v1/xxxx, tenant3.app.com/api/v1/xxxx I've come to a simple solution by setting a wildcard subdomain (*.app.com) on webserver Apache/Nginx vhost configuration file. I have googled so many concept for building a multi-tenant app server but still don't understand how to really done it, what is the right way to do it and what is actually required to do this task. So I've come to this questions, Do I need a proxy server, dns masking, etc.. How to monitor each tenants activity What about server performance, load balancing, and scalability How to setup ssl certificate for each tenant what about application cache for each tenant Is it reliable to use the setup for production etc ... I have a very litte experience on server infrastructure, so I'm looking for a DIY walkthrough, step by step guide, or sophisticate solution ready to implemented for production

  Read the article

• Getting Dell E6320 with I7 to work with 3 monitors at 1920x1080p x 3

  - by MadBoy

  I want to buy Dell E6320 which comes with Intel Core I7-2620M (2.70GHz, 4MB cache, Dual Core) with Intel HD Graphics 3000. Laptop will come with docking station. I want to connect 3 monitors to that docking station so that working at home would give me some additional boost. Docking station will allow me to connect only 2 monitors so I'm looking at following other options: Matrox TRIPLEHEAD2GO DIGITAL Edition or TRIPLEHEAD2GO DP Edition. But reading Matrox Support Page intel GPU can't run the highest resolution with 3 monitors connected, it even gets worse since it seems monitors would have to be able to work at 50hz. Also I'm not sure but it seems that Matrox doesn't split the monitors as 3 separate monitors but simply as one big space (which is a bit opposite to what I need) Buy 2 or maybe just 1 USB based monitor but it would also mean having 1 or 2 different monitors then the main one, unless I buy 3 USB based monitors which would mean more money to spend. Also I found only couple of models and most of them require USB 3.0 and no other cables to plug in (nice but costly - couldn't find decent monitor with only USB for sending signal and having power connected normally) . But docking station has only one USB 3.0 port. Can I use hub and still get it to work? Find some converters from Digital to USB (I think DisplayLink does some?) Buy different laptop but what kind? I need it to be I7, small (13"), fast and lightweight. At same time it requires docking station that I can use at home to connect 3 external monitors. Some other suggested solution... Edit: I need 3 monitors for work in terms of coding in Visual Studio or having word/excel/outlook open. Nothing fancy. Maybe some movie once in a while.

  Read the article

• How to Use 3 Monitors

  - by The.Anti.9

  Right now my setup has a nice big 24" flatscreen in the center, and a 19" flatscreen to the left. And a big gaping hole on the right. I have a 3rd monitor to put there, but I'm not sure how to get the computer to recognize it. Do I need a graphics card with 3 ports? Or can I span the monitors over non SLI-Linked graphics cards? Is it possible to plug my 3rd monitor into the on-board VGA port and have it work?

  Read the article

• 3 monitors, 2 X screens, Twinview not working as expected

  - by mononym

  Hi Guys, I have 3 monitors on 2 graphics cards (both nvidia) to get all 3 working i set 2 as twinview and one to have its own x screen. but when i do this, the twinview screens (which previously worked like 2 seperate screens) now work as one, ie a maximised window is across both screens How can i get the twinview to work as 2 seperate screens again?

  Read the article

• Dell 620 display is too bright to use

  - by keith

  I have a Dell D620 with a display problem. In windows 7 the display seems to be too bright, the text is broken up, the only way to see the mouse is at a very oblique angle. Changing the brightness with fn and brightness control has little/no effect. When I put it in high contrast mode I can see all the colors, but any windows pictures etc are still useless. I cannot get it to connect to an external monitor via VGA port or via a USB-VGA connector.

  Read the article

• Controlling clone access to multiple mercurial repos served via hgwebdir.cgi

  - by chrislawlor

  I'm trying to host multiple hg repositories to use for my clients. I need to control access to each repository individually - not just push access, but clone as well. I've got an .htaccess set which requires authentication globally: AuthUserFile /path/to/hgweb.passwd AuthGroupFile /dev/null AuthName "Chris Lawlor Client Mercurial Repositories" AuthType Basic <Limit GET POST PUT> Require valid-user </Limit> <FilesMatch "\.(htaccess|passwd|config|bak)$"> Order Allow,Deny Deny from all </FilesMatch> Then in each repository, I've got a .hg/hgrc file requiring a valid user [web] allow_push = <comma seperated user list> This almost does what I need. The problem is that I need to add ALL my clients to hgweb.passwd, which gives them clone access to ALL of the repositories. The only solution I can think of is to have another .htaccess and .passwd file in EACH repository. I don't really want to do that though, seems a little convoluted. I can already specify a list of authorized users for each repository in that repos' hgrc file with the allow_push setting. If only there were an allow_clone setting as well... All the documentation I've found for hgwebdir.cgi is incomplete. I've read: http://mercurial.selenic.com/wiki/HgWebDirStepByStep http://hgbook.red-bean.com/read/collaborating-with-other-people.html#sec:collab:cgi http://hgbook.red-bean.com/read/collaborating-with-other-people.html And others. I've yet to find a comprehensive list of hgrc settings. I guess this is as much an Apache question than a mercurial question. Unless I can find a better approach, I'll be going with a seperate .htaccess and .passwd file for each repo. This is a virtual host on Webfaction if it matters - set up roughly like this http://docs.webfaction.com/software/mercurial.html

  Read the article

• How to have more than 1 addons set installed on a single windows account?

  - by Bartek Szabat

  I'd like to have different addons set enabled when I'm using firefox for every day internet browsing and different addons set when I'm using firefox as web development tool. Is there any painless way for this? Also it would be nice to be able to use them both at the same time on the separate windows.

  Read the article

• Why is my second monitor not working?

  - by StampedeXV

  Since I have my new computer, I have a very weird problem. Facts: New Computer: Motherboard: ASRock Z77 Pro 3 Graphics-card: Asus1GB D5 X EN GTX560 DCII OC/2DI R CPU: Intel i5-3570 Windows 7 64bit 500W beQuiet special edition (92% efficiency) 8GB 1333MHz DDR3 Corsair RAM (CL9) Scythe Mugen 2 2 magnetic HDDs + 1 SDD 1 DVD-R Old Computer: Motherboard: Asus P55 something Graphics-card: Asus1GB D5 X EN GTX560 DCII OC/2DI R CPU: Intel i7-870 Windows 7 64bit 550W Corsair 8GB 1333MHz DDR3 Corsair RAM (CL9) Scythe Mugen 3 2 magnetic HDDs + 1 SDD 1 DVD-R On the old computer it worked fine with two monitors. Moving to the new (I took the same Graphics-card) it only works with one. The weird thing I mentioned is: not matter which one. But if I put both there, only one is available. There is no reaction at the start (where normally (at least if I remember correctly) the monitor shortly went from "standby" to "on"). Windows does not recognize a second monitor in the Device Manager. I have the latest drivers for Motherboard and Graphics-card. I have the latest BIOS drivers. I am out of ideas. Edit: completed computer setup

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >