Search Results

Search found 4028 results on 162 pages for 'mysqld safe'.

Page 89/162 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• Linux bash: when to use egrep instead of grep?

  - by Michael Mao

  Hi all : I am preparing for a Linux terminal assessment now, I tried to Google and found most resources are referring to the basic "grep" rather than the more powerful "egrep" -- well, that is at least what the professor said in lecture. I am always working with small samples so performance tuning is a thing too far away. So basically I'd like to know are there any areas where I must switch to egrep to do it in a better way? Is it safe to work with basic "grep" as for now? will there be potential risks? Sorry about my limited knowledge on Linux shell commands, the man page looks like a maze to me and honestly I haven't put much time in understanding all the features both command provide.

  Read the article

• "EISA Configuration" partition

  - by jpbochi

  I have a new Alienware M17x running Vista x64. I just found out that it came with a misterious "EISA Configuration" partition. On Disk Management, my Disk 0 tells me that my HD has about 300 GB. The EISA partition has 12 GB. That's big enough to know why is it there. So, this is more of a bundle question. What is this "EISA Configuration" partition? Is it safe to remove it somehow? If so, how can I delete it? I mean join it with the primary partition, or set it as a secondary small partition.

  Read the article

• Can't connect to MySQL on CentOS 5 Error 13 - Permission Denied

  - by abszero

  Ok, I have an install of CentOS 5 running as a GuestOS in VirtualBox. The network card for the Cent box is bridged with that of my host OS so that the boxes can see each other. Cent has an IP of 192.168.1.108 and my Host box has an IP of .104. Everything, with regard to networking, seems to be working properly as I can access the Drupal install that is on the Cent box from a web browser on my host box by navigating to http://192.168.1.108 however when I try to configure the database for Drupal through the Drupal install interface I am getting the Can't connect to MySQL error. First I thought this might of been a Firewall issue so I stopped iptables but that had no effect. I thought maybe the user I had setup did not have access to the server so I tried root and that did not work. Searching on the net said that I needed to provide a bind-address parameter to my.cnf so I did that with no change. (As a side note the length of my my.cnf file was MUCH shorter than the ones presented online. In fact under mysqld all I have are datadir, socket, user, and bind-address. Is this normal or should the file be more verbose?) After a few hours of messing with permissions and such I tried using 'localhost' as the value for the database server, from my HOST OS, and the Drupal install kicked off without a problem. So while my issue is resolved I am curious as to why 'localhost' works and why 192.168.1.108 did not? Is there something i need to do to specifically access the MySQL box via the aforementioned IP? Thanks.

  Read the article

• BSOD on windows 7 with SSD during boot after improper shutdown

  - by Bob

  I have a BSOD on windows 7 with SSD during boot after improper shutdown (while windows animation logo is moving). The computer restart imediatly after BSOD, and windows proposes to launch startup repair (if i do it, it takes +-5min and fixes the problem : computer starts normally). However, after any new improper shutdown, i got the same problem. Remarks: If i unplug, re-plug the SSD whyle system is shutdown, i have the same problem. If i reproduce the situation with old HDD, i havn't the problem Previously, i had a different problem: BSOD when waking up after sleep, which was fixed by installing drivers (ethernet, usb, graphic card) I have made ram chech and ssd check and found no problems Starting with safe mode after improper shutdown causes a BSOD at loading of classpnp.sys Configuration: System: HP compaq 8510p SSD: OCZ vertex-2 2.5 Boot options: SATA native mode - Enable, HDD transalation mode - LBA-assisted

  Read the article

• Correct way of bringing network interface down in linux

  - by Karolis T.

  For example: $ ifconfig dummy0 up $ ifconfig dummy0 "192.168.1.190 netmask 255.255.255.0" Calling ifconfig with no parameters shows the interface dummy0 Link encap:Ethernet HWaddr b6:1f:f3:92:6d:20 inet addr:192.168.1.190 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::b41f:f3ff:fe92:6d20/64 Scope:Link UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:15 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:1050 (1.0 KiB) How can I bring the interface down so that it doesn't show up in ifconfig ifconfig -a ifconfig dummy0 without rmmod dummy because dummy is used just for example purposes. If there is no way to do that, what "throw-away" IP could I set to it and be safe from any trouble? like $ ifconfig dummy0 down $ ifconfig dummy0 0.0.0.0

  Read the article

• Wireless Keyboard/Mouse: Should batteries be removed when not in use?

  - by abel

  I recently bought a Logitech Wireless Keyboard and mouse. I use it almost daily but for a couple of hours only. The keyboard has 2 AAA batteries and the mouse has 1 AA battery. The box mentions that the keyboard has a 24 month battery life and the mouse has a 5 month battery life. Should I keep the batteries in the keyboard/mouse, when they are not in use?Is it safe? Does the battery life mean 24 months of continuous usage or 24 months of average usage?

  Read the article

• UFW: force traffic thru OpenVPN tunnel / do not leak any traffic

  - by hotzen

  I have VPN access using OpenVPN and try to create a safe machine that does not leak traffic over non-VPN interfaces. Using the firewall UFW I try to achieve the following: Allow Access from LAN to the machine's web-interface Otherwise only allow Traffic on tun0 (OpenVPN-Tunnel interface when established) Reject (or forward?) any traffic over other interfaces Currently I am using the following rules (sudo ufw status): To Action From -- ------ ---- 192.168.42.11 9999/tcp ALLOW Anywhere # allow web-interface Anywhere on tun0 ALLOW Anywhere # out only thru tun0 Anywhere ALLOW OUT Anywhere on tun0 # in only thru tun0 My problem is that the machine is initially not able to establish the OpenVPN-connection since only tun0 is allowed, which is not yet established (chicken-egg-problem) How do I allow creating the OpenVPN connection and from this point onward force every single packet to go thru the VPN-tunnel?

  Read the article

• How to best migrate one Windows 2008 R2 / SharePoint / Exchange / Terminal Services (All-in-one) int

  - by MadBoy

  Hello, My client has one machine with Windows 2008 R2 and everything on it. By everything I mean AD, DNS, SharePoint 2010 Standard, Exchange 2010 Standard, Terminal Services, Office 2010 and a bunch of additional apps. Everything stands on I7 x 2 and 36gb ram for 7 people total. I've decided that we should virtualize it and split things into 4 VM's and keep host only with Hyper-V installed to host all the machines. What problems should I expect? What good advices can you give. My plan is that when i move everything to VM's i will move vm's to safe place and format the host as it has a lot of really bad things happening on it. But this also means that everything will be wiped from current solution so I have to be sure that Exchange etc will work when host gets wiped. MadBoy

  Read the article

• Which versions of C++ redistributables can I remove?

  - by Marnix

  I have a number of Microsoft Visual C++ 2005 and 2008 Redistributable and I would like to know which ones are safe to remove, because there are actually more than 10 installed on my computers. Microsoft Visual C++ 2005 ATL Update kb973923 - x64 8.0.50727.4053 Microsoft Visual C++ 2005 Redistributable Microsoft Visual C++ 2005 (x64) Microsoft Visual C++ 2008 ATL Update kb973924 - x64 9.0.30729.4148 Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17 Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.17 Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148 Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4974 Microsoft Visual C++ 2010 x64 Runtime - 10.0.30319 It could be that these versions are all different, but a confirmation of that is fine for me as well. Thanks in advance. PS. I'm using an x64 machine one windows 7.

  Read the article

• Is there a command line (or autohotkey) way of dismounting a USB drive?

  - by justintime

  I find dismounting a USB drive takes far too many mouse clicks for my liking. Is there are command line way of doing it (XP and Vista)? Addition I have an eye condition that makes hand mouse coordination difficult so any suggestion that there aren't too many clicks will be downvoted as not answering my question. However I use AutoHotkey a lot and one use case would be to call it from an AHK script. So if there is a way to code it in AHK that will do. Added this to the tags. Further question - is it safe to remove a disk when the computer is a. on Standby or b. Hibernated. I recall that W2000 got uspet if you pulled a disk from a hibernated machine. Or is it better to explicitly dismount or sync before you hibernate or standby - prabably in a script.

  Read the article

• Mass remove passwords from rar archives

  - by ldigas

  Is there a way to (I'm using WinRAR; demo, but I'm willing to change it to whatever is needed) mass remove passwords from a bunch of files ? Problem description: for reasons unknown to me, some archiving was done for two-and-something years in RAR format, and all archives have passwords. I have a list of them, them all being similar (mostly something like John-03, John-04, John-05 ... e.g. name-month ...) but I need to manipulate the files at large, and it is a real problem removing and or dearchiving all those files, while entering passwords manually. What would be my best options concerning ? Ideally, I'm looking for some kind of archiver which tries out a predefined list of passwords, and asks only if non of them cracks the safe. Afaik, WinRAR has no such feature.

  Read the article

• No clue for high load average on top

  - by Oz.

  We have several machines on Amazon (ec2) of the type c1.xlarge with 16 cpus, running the Amazon AMI. Details on the machine: 7 GB of memory 20 EC2 Compute Units (8 virtual cores with 2.5 EC2 Compute Units each) 1690 GB of instance storage 64-bit platform I/O Performance: High API name: c1.xlarge One out of the several machines is showing a high load average, since we have run the last yum upgrade a couple of weeks a go. We did not yet update the other machines, and everything looks normal on them. The strange thing is that the top command not showing any hint for the cause of the load. CPUs are 4.8%us, 1.1%sy, 0.0%ni, 94.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st(see below). Mem is about 1.5GB free. Any idea what could it be, or where else can we check? Many thanks for the help. # # top # top - 07:57:42 up 4:18, 1 user, load average: 1.36, 1.45, 1.47 Tasks: 131 total, 1 running, 130 sleeping, 0 stopped, 0 zombie Cpu(s): 4.8%us, 1.1%sy, 0.0%ni, 94.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 7120092k total, 5644920k used, 1475172k free, 532888k buffers Swap: 0k total, 0k used, 0k free, 3463936k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1557 mysql 20 0 1829m 374m 6448 S 14.3 5.4 11:15.09 mysqld 6655 apache 20 0 416m 49m 3744 S 9.3 0.7 0:04.85 httpd 27683 apache 20 0 421m 54m 3708 S 9.0 0.8 0:00.99 httpd 6682 apache 20 0 424m 57m 3788 S 8.3 0.8 0:03.81 httpd 16816 apache 20 0 419m 51m 3760 S 4.3 0.7 0:04.09 httpd 22182 apache 20 0 417m 50m 3756 S 1.7 0.7 0:06.34 httpd 219 root 20 0 0 0 0 S 0.3 0.0 0:00.34 kworker/7:1 699 root 20 0 0 0 0 S 0.3 0.0 0:00.40 kworker/3:1 1 root 20 0 19376 1508 1212 S 0.0 0.0 0:00.29 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:00.71 ksoftirqd/0

  Read the article

• My linux server "Number of processes created" and "Context switches" are growing incredibly fast

  - by Jorge Fuentes González

  I have a strange behaviour in my server :-/. Is a OpenVZ VPS (I think is OpenVZ, because /proc/user_beancounters exists and df -h returns /dev/simfs drive. Also ifconfig returns venet0). When I do cat /proc/stat, I can see how each second about 50-100 processes are created and happens about 800k-1200k context switches! All that info is with the server completely idle, no traffic nor programs running. Top shows 0 load average and 100% idle CPU. I've closed all non-needed services (httpd, mysqld, sendmail, nagios, named...) and the problem still happens. I do ps -ALf each second too and I don't see any changes, only a new ps process is created each time and the PID is just the same as before + 1, so new processes are not created, so I thought that process growing in cat /proc/stat must be threads (Yes, seems that processes in /proc/stat counts threads creation too as this states: http://webcache.googleusercontent.com/search?q=cache:8NLgzKEzHQQJ:www.linuxhowtos.org/System/procstat.htm&hl=es&tbo=d&gl=es&strip=1). I've changed to /proc dir and done cat [PID]\status with all PIDs listed with ls (Including kernel ones) and in any process voluntary_ctxt_switches nor nonvoluntary_ctxt_switches are growing at the same speed as cat /proc/stat does (just a few tens/second), Threads keeps the same also. I've done strace -p PID to all process too so I can see if any process is crating threads or something but the only process that has a bit of movement is ssh and that movement is read/write operations because of the data is sending to my terminal. After that, I've done vmstat -s and saw that forks is growing at the same speed processes in /proc/stat does. As http://linux.die.net/man/2/fork says, each fork() creates a new PID but my server PID is not growing! The last thing I can think of is that all process data that proc/stat and vmstat -s show is shared with all the other VPS stored in the same machine, but I don't know if that is correct... If someone can throw some light on this I would be really grateful.

  Read the article

• How to back up a network volume to my Time Capsule?

  - by Mike

  I have a Time Capsule that I'm using for my backups. I have a network volume (coincidentally on the same time capsule) that I'd like to back up as well. How can I tell Time Machine to back up network volumes in addition to my main laptop hard drive? PS: yes, I know this setup isn't ideal. It'll incur 2x network overhead when backing up the network volume, plus my data won't be safe in the event of a drive failure since both copies will be on the same disk. However, it will give me some small amount of safety in the event I accidentally delete files on the network volume, among other things.

  Read the article

• My system administrator set up 2 databases that sync. Master-Master. However, these two databases a

  - by Alex

  DB1 and DB2. I made changes to DB1, and it does not seem to be on DB2. When I do "SHOW SLAVE STATUS\G" on DB2, there seems to be an error: mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: Master_User: Master_Port: Connect_Retry: 60 Master_Log_File: mysql-bin.0005496 Read_Master_Log_Pos: 5445649315 Relay_Log_File: mysqld-relay-bin.0041705 Relay_Log_Pos: 1624302119 Relay_Master_Log_File: mysql-bin.0004461 Slave_IO_Running: Yes Slave_SQL_Running: No Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 1062 Last_Error: Error 'Duplicate entry '4779' for key 1' on query. Default database: 'falc'. Query: 'INSERT INTO `log` (`anon_id`, `created_at`, `query`, `episode_url`, `detail_id`, `ip`) VALUES ('fdzn1d45kMavF4qbyePv', '2009-11-19 04:19:13', 'amazon', '', '', '130.126.40.57')' Skip_Counter: 0 Exec_Master_Log_Pos: 162301982 Relay_Log_Space: 136505187184 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL 1 row in set (0.00 sec) Then, I did show tables, and it seems like DB2 is lacking a table that I created on DB1...that means that for some reason, DB2 stopped syncing with DB1. How can I simply allow them to be in full synchronization again? All I want is DB2 to be exactly the same as DB1!

  Read the article

• Transfer nearly an entire file system to a fresh install as smoothly as possible

  - by Xander

  I've got a friend who needs his computer working in just a few hours. His files are safe, however, he managed to corrupt his main install of Windows 7. My plan is to go in with a Linux disk, copy his C:\ do a backup drive I've got and then reinstall. Restoring many of his files will be pretty simple (such as documents and such), however, things such as applications won't transfer as easily. Is there any easy way to transfer applications such as MS Office (which he needs in the morning) or other commercial software packages without having to go through the hassle of locating the keys and reinstalling them completely? I don't think just moving them over will work just because of the fact that I'm sure much of that is stored in the registry (validation stuff and such). Anyways, quick responses would be super nice! Also, additional help would be great!

  Read the article

• AWS EC2: How to determine whether my EC2/scalr AMI was hacked? What to do to secure it?

  - by Niro

  I received notification from Amazon that my instance tried to hack another server. there was no additional information besides log dump: Original report: Destination IPs: Destination Ports: Destination URLs: Abuse Time: Sun May 16 10:13:00 UTC 2010 NTP: N Log Extract: External 184.xxx.yyy.zzz, 11.842.000 packets/300s (39.473 packets/s), 5 flows/300s (0 flows/s), 0,320 GByte/300s (8 MBit/s) (184.xxx.yyy.zzz is my instance ip) How can I tell whether someone has penetrated my instance? What are the steps I should take to make sure my instance is clean and safe to use? Is there some intrusion detection techinque or log that I can use? Any information is highly appreciated.

  Read the article

• How can I find out which driver/file is being loaded when the system hangs during the Windows 7 boot

  - by user24247

  My desktop computer (1 OS, 1 drive, 1 partition) hangs during the Windows 7 boot process. When selecting F8 I can select Safe Boot which allows me to see the files processed during the boot process. I know that the last line displayed is the last file that was SUCCESFULLY loaded. How do I find out what the next line, and the potential candidate driver/file/program would have been? The unusual thing, at least in my experience, is that the freezing up of the system also happens when I boot from the Windows 7 install disks, which is preventing me from any repair options. With a failure of both, I cannot not restore Windows 7 to a previous date or uninstall drivers/programs that may be the cause of the hanging. Thanks for your responses. Marc

  Read the article

• How to find process that's using 100% of CPU

  - by Gabriel

  As i'm looking at htop and top i see that my processor usage is 100% allways. But i can not see any process that is using that much CPU. Htop shows me only 1-2 processes that use around 5% cpu time. Is there a way to find the processes that use that much cpu time? Here is the output of ps -eo pcpu,pid,user,args | sort -r -k1 | less %CPU PID USER COMMAND 0.8 20413 root jsvc.exec -user tomcat -cp ./bootstrap.jar -Djava.endorsed.dirs=../common/endorsed -outfile ../logs/catalina.out -errfile ../logs/catalina.err -verbose org.apache.catalina.startup.Bootstrap -security 0.3 631 mysql /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --pid-file=/var/lib/mysql/mysql.pid --skip-external-locking 0.2 3380 root /usr/local/apache/bin/httpd -k restart -DSSL 0.2 24698 root tailwatchd 0.2 22472 root /usr/local/jdk/bin/java -Djava.util.logging.config.file=/usr/local/jakarta/tomcat/conf/logging.properties -Dfile.encoding=UTF8 -XX:MaxPermSize=128m -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Djava.endorsed.dirs=/usr/local/jakarta/tomcat/common/endorsed -classpath /usr/local/jakarta/tomcat/bin/bootstrap.jar -Dcatalina.base=/usr/local/jakarta/tomcat -Dcatalina.home=/usr/local/jakarta/tomcat -Djava.io.tmpdir=/usr/local/jakarta/tomcat/temp org.apache.catalina.startup.Bootstrap start 0.1 32095 root cpanellogd - processing bandwidth 0.0 9733 root sleep 1m

  Read the article

• How do I create a calendar appointment from an e-mail in Outlook 2011?

  - by Jeff O

  How do I create a calendar appointment from an e-mail in Outlook 2011 for Mac? In Windows, the e-mail content and attachments are carried over just by dragging and dropping. Dragging and dropping on the Mac doesn't work. Is there any other function to take an e-mail and make it a calendar appointment? I'm trying to avoid emailing it to myself. Edit: Since someone went to the trouble to make email2task, is it safe to assume this feature is not available otherwise?

  Read the article

• Mikrotik server networks and Cain & Abel

  - by user269742

  I'm connected to the internet via a mikrotik server network. Recently, I read about that scaring application named Cain & Abel and all the capabilities it offered for malicious users. I don't know if anyone on my network is using or even aware of such application but my questions are: 1- How to protect myself from this program? 2- How to know if someone using such application against me? 3- Is Tor Bundle capable of protecting me from Cain & Abel? 4- If I filled my e-mail password via SSL page, Can Cain & Abel collect it? 5- Is it safe to use SKYPE or Yahoo Messenger voice chat if some one using Cain & Abel on my network?

  Read the article

• How likely can my data be recovered after Windows CHKDSK performed on a degraded RAID 5 array?

  - by chrisling106

  Hello there, We have a RAID 5 setup with 3 SATA disks, #2 went down as reported on the pre-POST screen. Unfortunately, for some reason out of my control, the system was rebooted with a degraded RAID :-O Windows XP (64-bit) loaded, CHKDSK ran automatically and done its recovery! From that point onwards, the following error prompts every time even in Safe Mode: lsass.exe - The endpoint format is invalid I took those 3 disks to the data recovery expert and need to wait at least 2-4 days for results. There are 2 VMs on multiple files stored in this RAID 5 array, and there's no backup! Sorry, I just inherited the system from an ex-staff who has left the company 2 months before I joined. How likely the data can be recovered?

  Read the article

• unable to install oracle

  - by Mohamed Saligh

  I have installed oracle few months back. I was running fine in my local system. Unfortunately my friend has removed all the directories in safe mode. meaning to say it was not properly un-installed from my system. I tried to remove all the Registry keys, Services associated with oracle. Now, I can install it. Unable to use any sqlplus services or anything. How to completely remove my hidden old files and services if any. Need to install and use it. Any help indeed

  Read the article

• Why times elapsed connecting to a server are different?

  - by user1634619

  I have a small program which connects to a server of my choice and measures the time elapsed to do so. Each time I run it it returns different result. My question is what does this time depend on ? Network congestion for one. If I choose a server that has multiple addresses e.g. google.com the length of physical link may differ from time to time ? Is it safe to assume that it also affects connection time ? Are there any other factors in place ?

  Read the article

• Windows xp problems

  - by anca

  I had problems with web virus cake 3.00 and I downloaded Malwarebytes Anti-WALWARE, I got rid of that virus but I did other problems. When I open my PC appears to skype error "exception in module Skype.exe at 0013CE7D.The EOleSysError RPC server is unavailable" and another one "Error in C: \ WINDOWS \ system32 \ Nvcpl.Dll Missing entry: NnStartup" when I install / uninstall a program says "Windows Installer service Could you not be accessed. This CAN occure if you are running Windows in safe mode, or if the Windows Installer is not corectly installes. Contact your support personnel for assistance. I have tried many "solutions" but nothing worked. Please HELP! It windows xp sp 2

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >