Search Results

Search found 3875 results on 155 pages for 'sha le'.

Page 89/155 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• Test tomcat for ssl renegotiation vulnerability

  - by Jim

  How can I test if my server is vulnerable for SSL renegotiation? I tried the following (using OpenSSL 0.9.8j-fips 07 Jan 2009: openssl s_client -connect 10.2.10.54:443 I see it connects, it brings the certificate chain, it shows the server certificate, and last: SSL handshake has read 2275 bytes and written 465 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 1024 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 50B4839724D2A1E7C515EB056FF4C0E57211B1D35253412053534C4A20202020 Session-ID-ctx: Master-Key: 7BC673D771D05599272E120D66477D44A2AF4CC83490CB3FDDCF62CB3FE67ECD051D6A3E9F143AE7C1BA39D0BF3510D4 Key-Arg : None Start Time: 1354008417 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) What does Secure Renegotiation IS supported mean? That SSL renegotiation is allowed? Then I did but did not get an exception or get the certificate again: verify error:num=20:unable to get local issuer certificate verify return:1 verify error:num=27:certificate not trusted verify return:1 verify error:num=21:unable to verify the first certificate verify return:1 HTTP/1.1 200 OK Server: Apache-Coyote/1.1 Content-Type: text/html;charset=ISO-8859-1 Content-Length: 174 Date: Tue, 27 Nov 2012 09:13:14 GMT Connection: close So is the server vulnerable to SSL renegotiation or not?

  Read the article

• Setting up a VPN tunnel between a Linux box and a Cisco FW

  - by Meni

  Hi. I have a linux box (ubuntu) and I have a service provider that will only allow an IPSEC tunnel connection between his network and my linux box. I have these details from the service provider: Service Provider: Peer IP – Lan on service provider's side - 10.10.10.10/24 Linux box details: Peer IP - Lan - Connection details: Phase1: Sha Aes 128 DH - group x Preshared – Lifetime – 24h Phase2: Sha Aes 128 Lifetime – 1h I am not sure which app I need to install on the linux box that will support this type of connection. Any ideas? Thanks!

  Read the article

• Is this a secure solution for RESTful authentication?

  - by Chad Johnson

  I need to quickly implement a RESTful authentication system for my JavaScript application to use. I think I understand how it should work, but I just want to double check. Here's what I'm thinking -- what do you guys think? Database schema users id : integer first_name : varchar(50) last_name : varchar(50) password : varchar(32) (MD5 hashed) etc. user_authentications id : integer user_id : integer auth_token : varchar(32) (AES encrypted, with keys outside database) access_token : varchar(32) (AES encrypted, with keys outside database) active : boolean Steps The following happens over SSL. I'm using Sinatra for the API. JavaScript requests authentication via POST to /users/auth/token. The /users/auth/token API method generates an auth_token hash, creates a record in user_authentications, and returns auth_token. JavaScript hashes the user's password and then salts it with auth_token -- SHA(access_token + MD5(password)) POST the user's username and hashed+salted password to /users/auth/authenticate. The /users/auth/authenticate API method will verify that SHA(AES.decrypt(access_token) + user.password) == what was received via POST. The /users/auth/authenticate will generate, AES encrypt, store, and return an access token if verification is successful; otherwise, it will return 401 Unauthorized. For any future requests against the API, JavaScript will include access_token, and the API will find the user account based on that.

  Read the article

• Oracle Applications Day 2012. Experience the Global Innovation of Management Applications

  - by antonella.buonagurio

  1024x768 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} 1024x768 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} 10 ottobre 2012 – Milano, East End Studios | 17 ottobre 2012 - Roma, Officine Farneto Partecipa all’appuntamento dedicato alla comunità di Clienti e Partner per fare networking e condividere le esperienze sulle soluzioni più innovative per affrontare le sfide attuali e future. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A Milano (10/10/2012) interverranno, tra gli altri:  Enrico Ancona, Amministratore Delegato - Imperia & Monferrina e Business Reply  Massimiliano Gerli, CIO - Amplifon e Michele Paolin, Senior Manager - Deloitte eXtended Business Services A Roma (17/10/2012) interverranno, tra gli altri: Giulio Carone, CFO - Enel Green Power e Claudio Arcudi, Senior Executive - Accenture Gianluca D’Aniello, CIO - Sky e Giorgio Pitruzzello, Manager - Deloitte Consulting Spartaco Parente, EPD Change & Label Control - Abbott e Business Reply Sono inoltre previsti i contributi delle aziende Abbott, Aeroporto di Napoli, Amplifon, Dema Aerospace, Enel Green Power, Fiera Milano, Imperia & Monferrina, La Rinascente, Safilo, Sky, Spal,Technogym, Tiscali e Tivù che parleranno di: Innovation for Human Resources Performance Management Excellence Empower Applications with Technology (Milano) Applications for Public Sector (Roma) Next Generation Global Operations Customer Experience Revolution Oltre dieci Instant Workshop ti permetteranno di conoscere e condividere l’esperienza dei Partner e delle aziende che utilizzano le soluzioni Oracle.In più, oltre dieci Instant Workshop per conoscere e condividere l’esperienza dei Partner e delle aziende che utilizzano con successo le soluzioni Oracle. Iscriviti sul sito Partecipa al concorso fotografico Oracle I.M.A.G.E. e vinci il tuo iPad! Scatta le immagini che per te descrivono i cinque concept dell’evento (Innovation, Management, Applications, Global, Experience) e inviale per e-mail. Per iscriverti al contest visita la pagina Concorso sul sito Non perdere l’evento più “social cool” dell’anno!

  Read the article

• CodePlex Daily Summary for Thursday, June 12, 2014

  CodePlex Daily Summary for Thursday, June 12, 2014Popular ReleasesLuna ORM - Data Layer Code Generator for Vb.Net and C#: Luna 4.14.6.7: Newer version, better LunaEngine with many new feature. Any class implements IDisposable.StackBuilder: StackBuilder 1.0.21.0: *Issue #9 : Take weight of case into account while searching optimal case... *Issue #10 : Changing direction of last layer to use remaining space while stacking a palette... *Issue #11 : New URL for AutoUpdater section in app.config... First working version of INTEX Corp Plugin...QuickMon: Version 3.15: This release expand on 'Presets' - now called Templates. A complete Template editor has been added so you can manage templates(edit, save, import and export). Existing agent configs can be saved as a template for reuse as well. Additionally a few other fixes were done as well. 1. Fixed Registry collector - allow 'blank' key value (<default> values) 2. Default Monitor pack history size is now 100 3. qmp file extension is now the defaultCommand Line Media Controller: v1.0.0.0: Initial ReleaseVidCoder: 1.5.23 Beta: Added first translations for 1.5. Includes new languages Portuguese, Japanese, Chinese Simplified and Czech. Many of these translations are still incomplete: you can help out on Crowdin. Added an option to pass through an input track if it matches the output codec. Updated HandBrake core to SVN 6209. Fixed crash on AAC passthrough. Fixed x264 settings getting set incorrectly when reverting from a preset with the Advanced tab. Fixed occasional crash when calculating remaining time. ...PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.4: Added New-Folder and Remove-Folder functions (Thanks to SueH) Added NoWait parameter to Execute-Process Added the ability for Deploy-Application.exe to point to a different .ps1 file by specifying it on the command-line Added checks to Deploy-Application.exe to verify the AppDeployToolkit folder exists Added PSAppDeployToolkit icon to Deploy-Application.exe Fixed issue where hang could occur if file version was null when using Get-FileVersion Improved exception handling and loggin...CS-Script Source: Release v3.8.1: Improved ConfigConsole AdvancedShell extensions support cs-script.7z - CS-Script Suite (binaries, documentation, samples) cs-script.ExtensionPack.7z - CS-Script Extension Pack (additional binaries and samples) cs-scriptDocs.7z - CS-Script DocumentationProligence Orchard PowerShell: OrchardPs 0.2: Version 0.2, build 5273 Major Features: Support for Orchard 1.7 and 1.8 Support for managing Orchard themes Added new cmdlets: Get-OrchardFeature, Get-Tenant, Enable-Tenant, Disable-Tenant, Get-OrchardTheme, Enable-OrchardTheme Minor Features: Added 'gopc' alias for Get-OrchardPsCommand cmdlet Hidden 'Configuration' node in Orchard VFS, as it is not yet implemented Bug Fixes: Fixed signatures for *.ps1xml files 'FromAllTenants' switch no longer fails on tenants which are not running ...BugNET Issue Tracker: BugNET 1.6: Version 1.6 is a major upgrade to the latest frameworks and components by Microsoft. It includes a major UI overhaul using the bootstrap framework to have a modern, mobile friendly and easily customized layout. Upgrade to .NET 4.5 ASP.NET social auth Add script bundling and optimization Improvements for mobile devices Bootstrap (UI overhaul) Rewritten / friendly URL's Please read our release notes for BugNET 1.6: http://blog.bugnetproject.com/2014/06/08/bugnet-1-6-and-bugnet-pro-1...CppWindowsAPI: Library Build 20140608 [3.0]: There are many changes since the older versions before v3.0. Portable to the VS2013. Note that there is something still needed to implement so the relative components have been removed from this release, which will be re-implemented into the future releases. md5: 49bf91dbe4e47dee24d1f62a0b482334 sha-1: 4eabffc1b00557cdf8e83df18ac247e230f4c1d0 md5: 4a63a4923c23bcd821e7411453779086 sha-1: 1bb8549b92c8d791346cfe7efcdaeaa37098591d md5: 371026dfcac75e33f331430cf2c65415 sha-1: 7b8a155f30206f...SFDL.NET: SFDL.NET (2.2.9.3): Changelog: Retry Bugfix (Error Counter wurde nicht korrekt zurückgesetzt) Neue Einstellung: Retry Wartezeit ist nun EinstellbarLoad Runner - Distributed HTTP Pressure Test Tool: Load Runner 1.2: 1. added support for distributed load test (read documentation for details) 2. added detail documentationbabelua: 1.5.7.0: V1.5.7.0 - 2014.6.6Stability improvement: use "lua scripts folder" as lua search path when debugging;MyBB: MyBB 1.6.13 Türkçe Kurulum Paketi: MyBB 1.6.13 - Resmi Tam Türkçe UTF-8 Sifir Kurulum Paketi Rar Pass - Sifresi: mybb.com.tr Yayinci site: http://www.mybb.com.tr Orjinal indirme adresi: http://download.mybb.com.tr Destek 1: http://destek.mybb.com.tr/showthread.php?tid=12326 Destek 2: http://tr.mybbdepo.com/mybb-1-6-13-turkce-sifir-kurulum-paketi-konusu.html Dosya: MyBB1613KurulumPaketiTR.rar MD5: d2745b79aa8cc5f8cc09e8a91b50d3cc SHA-1: 6fbb8e611e6d78f8cd3d88d7a773edc67ecc2a3e Ekleyen: XpSerkan MCTR TEAM - Gururla Sunar.SEToolbox: SEToolbox 01.033.007 Release 1: Fixed breaking changes in Space Engineers in latest update. Installation of this version will replace older version.Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.Fantom - Expression Based Dynamic Language Manager: Fantom Binary and Test Web Site: The first version of FantomDLL. Download binary and sample site for testing.Back Up Your SharePoint: SPSBackUP 0.1: Supports SharePoint 2010 and 2013 All settings with xml input file Clean backup history Notifications by mail Log script results in rtf fileNPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...Media Player (Technology Area): Media Player 0.3 (Codname Kalo): Themes are included, along with a picture viewer. This does not require 0.2 to be installedNew ProjectsAddress Auto lookup For MS CRM 2013: Address Lookup to find correct addresses in less time.Aspose for Spring.Java: Aspose for Spring Java provides source code and detailed usage instructions for extending the existing Spring.Java samples.Beatting Mole XNA Game on Windows Phone: The project game using XNA Game Engine in Windows PhoneBrecham.Obex: The library provides very broad OBEX support, providing not just the ‘Put’ operation , but also: Connect, Put, Get, SetPath, Delete, and Abort.Command Line Media Controller: This application provides a command line interface for issuing basic media controls to most media player applications.DevExpress Prism Adapters: DevExpress Prism Adapters is a project intented to provide different adapters for DevExpress controls integration with Microsoft Prism.FVSB: fvsbH Logger (8 logger): Create logs with a html format with a Visual Studio 2013 style.Masked Input For CRM 2013: Mask Input for more user friendliness and to avoid user typo errors.MovieDatabase: A movie database manipulation program that uses the movie database api.OpenNetworkTester: GUI-based bandwidth testing toolProgress Tracker: A simple pet project that allows users to set up daily tasks and track which ones they complete.ProjectShipping: summarySerXio: tfs, read tfs dataValu Akunting: Sistem Informasi Akuntansi Valudata KomputindoWindows Phone 8.1 Training for MIC15: Using for store training source code and resource url/files/.??????-??????【??】: ????????????????????,??????????,????????、????,??????????,??????????。??????-??????【??】: ??????????????????????????????,??????????,????,????,???,??????。??????-??????【??】: ????????????????,?????????????? ??。????????、????、????、?????????? ???????。????-????【??】: ??????,??????:?????,?????,??????,??????????,????????。????????!????-????【??】: ?????????????????????:????、????、??????????????,????????。????????!??????-??????【??】: ???????????,?????,???????????,???????,????,????,????,?????。??????-??????【??】: ????????????、???、??、??????????????????????????????,????????????????!????-????【??】: ???????????????????????????、????、????、???????????,????,????!?????-?????【??】: ???????????????8?，????????,????????,??????????,?????,????? ,????????!?????-?????【??】: ???????????????6?,???????????????????????????,??????????????,?????????！????-????【??】: ????????????????????????????,???????????????????????,???????。??????-??????【??】: ????????????????、??????、??????、??????、??????、?????、??????、????、????、????????！?????-?????【??】: ???????????????,????????,????:???????,??????,????,????,?????,?????,??????!?????-?????【??】: ????????????????,?????????????。?????????,???????,???????,?????????????。??????-??????【??】: ?????????????????,??????????????、???????、???????、???????、?????！??????-??????【??】: ????????????????????,????????????????,????????????????,??????！????-????【??】: ???????????????,?????????????。????????????,???????,???????,?????,?????。?????-?????【??】: ?????????????????????????,???????????,????????,?????????????????????。?????-?????【??】: ?????????????????????,????“???????,???????”?????,????????????！??????-??????【??】: ??????????????????????????,????,????,??????????。???????????????,??,??,??????????,??????...??????-??????【??】: ???????????????????,?????????????,????,?????????,?????????????,?????,?????!????-????【??】: ??????????????,?????????????? ??。????????、????、????、?????????? ???????。?????-?????【??】: ????????????????,???????????????。???????????,??????:????、????、???????！?????-?????【??】: ?????????????????,???????????,??????????????,??????????，??????????????！??????-??????【??】: ????????????,????,??????????? ???? ???? ?????????,???,??,?????!??????-??????【??】: ????????????????、????、????、??????、????、????????,????????、?????????,?????。????-????【??】: ????????????????:?????? ???? ??????,???????,??????,???????。?????-?????【??】: ????????????????,?????????????。????????????,???????,???????,?????,?????。?????-?????【??】: ?????????????????????????,???????????,????????,???????????????????????????-??????【??】: ???????????????????,?????????????,????,?????????,?????????????,?????,?????!??????-??????【??】: ?????????????????,???????????????。???????????,??????:????、????、???????！????-????【??】: ????????????????????????,????,????,??????????。???????????????,??,??,??????????,??????...?????-?????【??】: ?????????????????,???????????,??????????????,??????????，???????????????????-?????【??】: ?????????????????、?????、?????、????、?????,??????????。????????????????!??????-??????【??】: ????????????????????,????????????????,????????????????,??????！??????-??????【??】: ??????????????????????,????“???????,???????”?????,????????????！????-????【??】: ???????????????,??????????????、???????、???????、???????、?????！?????-?????【??】: ???????????????,????,????,??????,????“????、????、????、????”????????,??????.?????-?????【??】: ???????????????????,????????:??、??、???,?????????????????????!??????-??????【??】: ????????,??????:?????,?????,??????,??????????,????????。????????!??????-??????【??】: ???????????????????????:????、????、??????????????,????????。????????!??????-??????【??】: ?????????????????????????????,??????????,????,????,???,??????????-????【??】: ????????????????、????,??100%????,??????,????????????,???????????!????-????【??】: ??????????????????,??????????,????????、????,??????????,??????????。??????-??????【??】: ??????????????,????????,?????,???,???????????,???????????,?????,??????！??????-??????【??】: ??????????????????????????????????:???????,??????,????,????,????,?????！????-????【??】: ???????????????????，?????????/?,,???????????,??????????????!?????-?????【??】: ???????????????????????,????,????,????,???????,?????,?????.??????。?????-?????【??】: ???????????????、?????,????????????????????,????,????,??????。??????-??????【??】: ????????????????????,???????????????????????????,????:????,????,????,?????。?????-?????【??】: ???????????????????、????????、????????、????????、???????,????????????。?????-?????【??】: ????????????????,???????,??????。??????????,????,????,?????,????????????。???????-???????【??】: ??????????????????,??????,????,?????????????,????????,??????,????,?????...???????-???????【??】: ?????????????? , ???? ?????,??????????????,????,????,??????。?????-?????【??】: ???????????????????,??????????????,???????????,??????,????,??????,??????。??????-??????【??】: ????????????????,??????????????????????:???????,??????,????,????,????,????,????,???????！??????-??????【??】: ??????????????!???????????,??????,????,?????????????,????????,??????,????,?????...??????-??????【??】: ??????????????????、?????、?????、????、?????,??????????。????????????????!??????-??????【??】: ??????????????????????,????????,??????????,?????,????? ,????????!??????-??????【??】: ?????????????????,??????????、??????,??????????、????、????、???????。????-????【??】: ???????????、??????????????????,????????,?????,??????,????,????,????!?????-?????【??】: ?????????????????????,???????????????,???????,?????,?????,????? !!!?????-?????【??】: ?????????????????????,???????????????,????????????????????!???????-???????【??】: ????????????????????,??????????????????,?????????????。?????????,????????????。??????-??????【??】: ??????????????????,????,????,?????????.?????,?????!?????,?????????、??、??!??????-??????【??】: ???????????????????,?????????????,?????????????,??????,????,????,??????????！??????-??????【??】: ?????????????????,??????????、??????,??????????、????、????、???????。??????-??????【??】: ??????????????????????,???????????????,???????,?????,?????,????? !!!????-????【??】: ????????????????????,????????,??????????,?????,????? ,????????!?????-?????【??】: ?????????????????????,???????????????,????????????????????!?????-?????【??】: ?????????????????、????,??100%????,??????,????????????,???????????!??????-??????【??】: ??????????????????????????????,???????????????????????,???????。??????-??????【??】: ??????????????????:?????? ???? ??????,???????,??????,???????。????-????【??】: ????????????????、????、??????、????????,????????????,???????????！?????-?????【??】: ???????????,????,??????????? ???? ???? ?????????,???,??,?????!?????-?????【??】: ???????????????、????、????、??????、????、????????,????????、?????????,?????。??????-??????【??】: ?????????????:??????、????、????、????、????、??????、??????，???????!??????-??????【??】: ??????????????????,????,??.??.??.??.??.??.??.???，????，???????!????-????【??】: ??????????????，???????、???????????，????????、????、????、??????、????????。?????-?????【??】: ????????????????????????????，???????????????，????????、????、????、????、?????????，???????、???、???，??????????????????????，????????????、???????、??????????；???????????????-?????【??】: ???????????【.????.????.????.????.】??【??】:、??、??、??、??、??、??、??、??、??、??、???????????-??????【??】: ??????????????????、?????、?????、?????、?????、????,???????????,?????,??????！??????-??????【??】: ??????????????????,???、???!???????,????????????????,????????????,???!????-????【??】: ?????????????????????,????????????,?????、??、????,?????,???????????-?????【??】: ????????????????、????、????、??????????,???,?????,???????????????.?????-?????【??】: ????????????????????,?????????、??、??、????,??????????,?????????????！

  Read the article

• Try to delete files used by IIS

  - by Cédric Boivin

  I got a service coded in c# whoes deleted somes web site files hosted on iis, before an update. But sometime when i delete the files, they stay there. If I try to delete them manually, via explorer, the file are not deletable, because they are in state "Delete pending". There is the way my service try to delete the file try { // Enlève tout les attributs sur le fichiers afin de s'assurer que le fichier n'est pas en lecture seul File.SetAttributes(file, FileAttributes.Normal); // Supprime le fichier File.Delete(file); } It's there a way to avoid this state ? What can i do to force the delete by c# code? Could i release all process to the file by c# code ? The environnement is IIS 7.5 Windows 2008-r2 .net 4.0 Thanks

  Read the article

• Oracle annuncia la nuova release di Oracle Hyperion EPM System

  - by Stefano Oddone

  Lo scorso 4 Aprile, durante l'Oracle Open World tenutosi a Tokyo, Mark Hurd, Presidente di Oracle, ha annunciato l'imminente rilascio della release 11.1.2.2 di Oracle Hyperion Enterprise Performance Managent System, la piattaforma leader nel mercato mondiale dell'EPM. La nuova release introduce un insieme estremamente significativo di nuovi moduli, migliorie a moduli esistenti, evoluzioni tecnologiche e funzionali che incrementano ulteriormente il valore ed il vantaggio competitivo fornito dall'offerta Oracle. Tra le principali novità in evidenza: introduzione del nuovo modulo Oracle Hyperion Project Financial Planning, verticalizzazione per la pianificazione economico-finanziaria, il funding ed il budgeting di progetti, iniziative, attività, commesse arricchimento di Oracle Hyperion Planning con funzionalità built-in a supporto del Predictive Planning e del Rolling Forecast per supportare processi di budgeting e forecasting sempre più flessibili, frequenti ed efficaci introduzione del nuovo modulo Oracle Account Reconciliation Manager per la gestione dell'intero ciclo di vita delle attività di riconciliazione dei conti tra General Ledger e Sub-Ledger o tra sistemi contabili differenti arricchimento di Oracle Hyperion Financial Management con un'interfaccia web totalmente nuova e l'introduzione della Smart Dimensionality, ovvero la possibilità di definire modelli con più delle 12 dimensioni "canoniche" tipiche delle releases precedenti, con una gestione ottimizzata di query e calcoli in funzione della cardinalità delle dimensioni in gioco arricchimento di Oracle Hyperion Profitability & Cost Management con funzionalità di Detailed Profitability, ovvero la possibilità di implementare modelli di costing e profittabilità in presenza di dimensioni ad altissima cardinalità quali, ad esempio, gli SKU delle industrie Retail e Distribution, i clienti delle Banche Retail e delle Telco, le singole utente delle Utilities. arricchimento di Oracle Hyperion Financial Data Quality Management, in particolare della componente ERP Integrator, con estensione delle integrazioni pre-built verso SAP Financials e JD Edwards Enterprise One Financials introduzione di Oracle Exalytics, il primo engineered system specificatamente progettato per l'In-Memory Analytics che permette di ottenere performance di calcolo e di analisi senza precedenti al crescere dei volumi di dati, delle dimensioni dei modelli e della concorrenza degli utenti, supportando così processi di Business Intelligence, Planning & Budgeting, Cost Allocation sempre più articolati e distribuiti Il prossimo 19 Aprile nella sede Oracle di Cinisello Balsamo (MI) si terrà un evento dove verranno presentate in dettaglio le novità introdotte dalla nuova release dell'EPM System; l'evento sarà replicato il 3 Maggio nella sede Oracle di Roma. L'evento è pubblico e gratuito, chi fosse interessato può registrarsi qui. Per ulteriori informazioni potete fare riferimento alla Press Release Ufficiale Qui potete rivedere l'intervento di Mark Hurd all'Open World sulla Strategia Oracle per il Business Analytics

  Read the article

• Visual Studio Talk Show #118 is now online - Command-Query Responsibility Separation (French)

  - by guybarrette

  http://www.visualstudiotalkshow.com Erik Renaud: La séparation des responsabilités entre les commandes et les requêtes Nous discutons avec Erik Renaud de la séparation des responsabilités entre les commandes et les requêtes (Command-Query Responsibility Separation - CQRS). La plupart des applications lisent les données beaucoup plus fréquemment qu'ils font des écritures. Sur la base de cette déclaration, une bonne idée consiste à séparer le code qui est responsable de l’écriture des données du code qui est responsable des requêtes (lecture). Erik Renaud est un coach .NET et co-fondateur de nVentive, une société conseil qui aide les équipes de développement logiciel au moyen de « coaching » et de « guidance ». Ses mandats courants se concentrent dans les grandes institutions financières en créant de nouvelles équipes qui supportent directement leurs activités primaires. Erik cumule plus de 10 ans d’expérience en développement logiciel, en faisant du coaching pour des équipes pour des besoins en architecture, modélisation et analyse. Pour la seconde année, il a reçu de Microsoft la reconnaissance MVP. Il est un ScrumMaster certifié, ce qui l’aide à guider les équipes vers le succès, et offre souvent des formations pour les technologies orientées objet. Il peut être rejoint au [email protected], ou vu tout partout où le kendo est pratiqué. var addthis_pub="guybarrette";

  Read the article

• Hub Forum - Connecting Digital Influencers - Paris 10 & 11 Octobre 2013

  - by Louisa Aggoune

  ORACLE a sponsorisé la 4ème édition du HUB FORUM qui s'est déroulé à l'Espace Pierre Cardin. Les 10,11 oct 2013, plus de 1200 leaders du digital, de la communication, du marketing, de la publicité et de l'innovation se réunissaient pour 2 jours de Conférence lors de la 4ème édition du HUBFORUM Paris, organisé par le HUB Institute.C'est l'évènement qui rassemble les décideurs du monde du digital et leur propose de rencontrer les meilleurs experts en communication du moment mais aussi d’échanger autour des pratiques qui ont fait leurs preuves. Il offre une occasion exceptionnelle de parler du futur du marketing digital, des nouvelles technologies et des médias. Le HUB FORUM en chiffre c'est:- 18 580 mentions- 3 520 vues du live- 80 speakers- 1 200 participants Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} A cette occasion, Pascal Hary - Directeur du Développement des Ventes eXperience Client & Social Europe, a animé une conférence sur le thème  #Social Trend 2014. Pour découvrir l'album photo: https://www.facebook.com/hubforum

  Read the article

• Wrong data retrieved from database

  - by holyredbeard

  So, I want to retrieve the order of the elements of a list. The order is set before by the user, and are stored in the table below. Because I also want to retrieve name and description of the list elements I need to combine two tables (see below). However, what is actually retrieved is an array containing 16 elements (should be four because it only exists four elements as for now). The array is too long to post here, but I put it in a phpFiddle to be found here if you're interested. Well, I have really tried to find what's wrong (probably something easy as always), but with no luck. Thanks a lot for your time and help! listModel.php: public function GetOrderedElements($userId, $listId) { // $userId = 46 // $listId = 1 $query = "SELECT le.listElemId, le.listElemName, le.listElemDesc, lo.listElemOrderPlace FROM listElement AS le INNER JOIN listElemOrder AS lo ON le.listId = lo.listId WHERE lo.userId = ? AND lo.listId = ? ORDER BY listElemId"; $stmt = $this->m_db->Prepare($query); $stmt->bind_param("ii", $userId, $listId); $listElements = $this->m_db->GetOrderedElements($stmt); return $listElements; } database.php: public function GetOrderedElements(\mysqli_stmt $stmt) { if ($stmt === FALSE) { throw new \Exception($this->mysqli->error); } if ($stmt->execute() == FALSE) { throw new \Exception($this->mysqli->error); } if ($stmt->bind_result($listElemId, $listElemName, $listElemDesc, $listElemOrderPlace) == FALSE) { throw new \Exception($this->mysqli->error); } $listElements = array(); while ($stmt->fetch()) { $listElements[] = array('listElemId' => $listElemId, 'listElemName' => $listElemName, 'listElemDesc' => $listElemDesc, 'listElemOrderPlace' => $listElemOrderPlace); } var_dump($listElements); $stmt->Close(); return $listElements; } from the database: listElemOrder: listElemOrderId | listId | listElemId | userId | listElemOrderPlace 1 1 1 46 1 2 1 2 46 4 3 1 3 46 2 4 1 4 46 3 listElement: listElemId | listElemName | listId | listElemDesc | listElemOrderPlace 1 Elem A 1 Derp NULL 2 Elem B 1 Herp NULL 3 Elem C 1 Lorum NULL 4 Elem D 1 Ipsum NULL Note: 'listElemOrderPlace' in the table listElement is the final order of the elements (all users average), not to be mixed with the one with the same name in the other table, that's only a specific user's order of the list elements (which is the interesting one in this case).

  Read the article

• Creating static NAT blocks outbound traffic Cisco ASA

  - by natediggs

  Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

  Read the article

• Cisco ASA: Allowing and Denying VPN Access based on membership to an AD group

  - by milkandtang

  I have a Cisco ASA 5505 connecting to an Active Directory server for VPN authentication. Usually we'd restrict this to a particular OU, but in this case users which need access are spread across multiple OUs. So, I'd like to use a group to specify which users have remote access. I've created the group and added the users, but I'm having trouble figuring out how to deny users which aren't in that group. Right now, if someone connects they get assigned the correct group policy "companynamera" if they are in that group, so the LDAP mapping is working. However, users who are not in that group still authenticate fine, and their group policy becomes the LDAP path of their first group, i.e. CN=Domain Users,CN=Users,DC=example,DC=com, and then are still allowed access. How do I add a filter so that I can map everything that isn't "companynamera" to no access? Config I'm using (with some stuff such as ACLs and mappings removed, since they are just noise here): gateway# show run : Saved : ASA Version 8.2(1) ! hostname gateway domain-name corp.company-name.com enable password gDZcqZ.aUC9ML0jK encrypted passwd gDZcqZ.aUC9ML0jK encrypted names name 192.168.0.2 dc5 description FTP Server name 192.168.0.5 dc2 description Everything server name 192.168.0.6 dc4 description File Server name 192.168.0.7 ts1 description Light Use Terminal Server name 192.168.0.8 ts2 description Heavy Use Terminal Server name 4.4.4.82 primary-frontier name 5.5.5.26 primary-eschelon name 172.21.18.5 dmz1 description Kerio Mail Server and FTP Server name 4.4.4.84 ts-frontier name 4.4.4.85 vpn-frontier name 5.5.5.28 ts-eschelon name 5.5.5.29 vpn-eschelon name 5.5.5.27 email-eschelon name 4.4.4.83 guest-frontier name 4.4.4.86 email-frontier dns-guard ! interface Vlan1 nameif inside security-level 100 ip address 192.168.0.254 255.255.255.0 ! interface Vlan2 description Frontier FiOS nameif outside security-level 0 ip address primary-frontier 255.255.255.0 ! interface Vlan3 description Eschelon T1 nameif backup security-level 0 ip address primary-eschelon 255.255.255.248 ! interface Vlan4 nameif dmz security-level 50 ip address 172.21.18.254 255.255.255.0 ! interface Vlan5 nameif guest security-level 25 ip address 172.21.19.254 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 switchport access vlan 3 ! interface Ethernet0/2 switchport access vlan 4 ! interface Ethernet0/3 switchport access vlan 5 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone PST -8 clock summer-time PDT recurring dns domain-lookup inside dns server-group DefaultDNS name-server dc2 domain-name corp.company-name.com same-security-traffic permit intra-interface access-list companyname_splitTunnelAcl standard permit 192.168.0.0 255.255.255.0 access-list companyname_splitTunnelAcl standard permit 172.21.18.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.20.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.18.0 255.255.255.0 access-list bypassingnat_dmz extended permit ip 172.21.18.0 255.255.255.0 192.168.0.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 12288 logging buffered warnings logging asdm notifications mtu inside 1500 mtu outside 1500 mtu backup 1500 mtu dmz 1500 mtu guest 1500 ip local pool VPNpool 172.21.20.50-172.21.20.59 mask 255.255.255.0 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface global (outside) 2 email-frontier global (outside) 3 guest-frontier global (backup) 1 interface global (dmz) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 2 dc5 255.255.255.255 nat (inside) 1 192.168.0.0 255.255.255.0 nat (dmz) 0 access-list bypassingnat_dmz nat (dmz) 2 dmz1 255.255.255.255 nat (dmz) 1 172.21.18.0 255.255.255.0 access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 4.4.4.1 1 track 1 route backup 0.0.0.0 0.0.0.0 5.5.5.25 254 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 ldap attribute-map RemoteAccessMap map-name memberOf IETF-Radius-Class map-value memberOf CN=RemoteAccess,CN=Users,DC=corp,DC=company-name,DC=com companynamera dynamic-access-policy-record DfltAccessPolicy aaa-server ActiveDirectory protocol ldap aaa-server ActiveDirectory (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft aaa-server ADRemoteAccess protocol ldap aaa-server ADRemoteAccess (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft ldap-attribute-map RemoteAccessMap aaa authentication enable console LOCAL aaa authentication ssh console LOCAL http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart sla monitor 123 type echo protocol ipIcmpEcho 4.4.4.1 interface outside num-packets 3 frequency 10 sla monitor schedule 123 life forever start-time now crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 ! track 1 rtr 123 reachability telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 management-access inside dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy companynamera internal group-policy companynamera attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com group-policy companyname internal group-policy companyname attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com username admin password IhpSqtN210ZsNaH. encrypted privilege 15 tunnel-group companyname type remote-access tunnel-group companyname general-attributes address-pool VPNpool authentication-server-group ActiveDirectory LOCAL default-group-policy companyname tunnel-group companyname ipsec-attributes pre-shared-key * tunnel-group companynamera type remote-access tunnel-group companynamera general-attributes address-pool VPNpool authentication-server-group ADRemoteAccess LOCAL default-group-policy companynamera tunnel-group companynamera ipsec-attributes pre-shared-key * ! class-map type inspect ftp match-all ftp-inspection-map class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect ftp ftp-inspection-map parameters class ftp-inspection-map policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns migrated_dns_map_1 inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect ils inspect netbios inspect rsh inspect rtsp inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp inspect icmp inspect icmp error inspect esmtp inspect pptp ! service-policy global_policy global prompt hostname context Cryptochecksum:487525494a81c8176046fec475d17efe : end gateway# Thanks so much!

  Read the article

• Introducción a ENUM (E.164 Number Mapping)

  - by raul.goycoolea

  E.164 Number Mapping (ENUM o Enum) se diseñó para resolver la cuestión de como se pueden encontrar servicios de internet mediante un número telefónico, es decir cómo se pueden usar los los teléfonos, que solamente tienen 12 teclas, para acceder a servicios de Internet. La parte más básica de ENUM es por tanto la convergencia de las redes del STDP y la IP; ENUM hace que pueda haber una correspondencia entre un número telefónico y un identificador de Internet. En síntesis, Enum es un conjunto de protocolos para convertir números E.164 en URIs, y viceversa, de modo que el sistema de numeración E.164 tenga una función de correspondencia con las direcciones URI en Internet. Esta función es necesaria porque un número telefónico no tiene sentido en el mundo IP, ni una dirección IP tiene sentido en las redes telefónicas. Así, mediante esta técnica, las comunicaciones cuyo destino se marque con un número E.164, puedan terminar en el identificador correcto (número E.164 si termina en el STDP, o URI si termina en redes IP). La solución técnica de mirar en una base de datos cual es el identificador de destino tiene consecuencias muy interesantes, como que la llamada se pueda terminar donde desee el abonado llamado. Esta es una de las características que ofrece ENUM : el destino concreto, el terminal o terminales de terminación, no lo decide quien inicia la llamada o envía el mensaje sino la persona que es llamada o recibe el mensaje, que ha escrito sus preferencias en una base de datos. En otras palabras, el destinatario de la llamada decide cómo quiere ser contactado, tanto si lo que se le comunica es un email, o un sms, o telefax, o una llamada de voz. Cuando alguien quiera llamarle a usted, lo que tiene que hacer el llamante es seleccionar su nombre (el del llamado) en la libreta de direcciones del terminal o marcar su número ENUM. Una aplicación informática obtendrá de una base de datos los datos de contacto y disponibilidad que usted decidió. Y el mensaje le será remitido tal como usted especificó en dicha base de datos. Esto es algo nuevo que permite que usted, como persona llamada, defina sus preferencias de terminación para cualquier tipo de contenido. Por ejemplo, usted puede querer que todos los emails le sean enviados como sms o que los mensajes de voz se le remitan como emails; las comunicaciones ya no dependen de donde esté usted o deque tipo de terminal utiliza (teléfono, pda, internet). Además, con ENUM usted puede gestionar la portabilidad de sus números fijos y móviles. ENUM emplea una técnica de búsqueda indirecta en una base de datos que tiene los registros NAPTR ("Naming Authority Pointer Resource Records" tal como lo define el RFC 2915), y que utiliza el número telefónico Enum como clave de búsqueda, para obtener qué URIs corresponden a cada número telefónico. La base de datos que almacena estos registros es del tipo DNS.Si bien en uno de sus diversos usos sirve para facilitar las llamadas de usuarios de VoIP entre redes tradicionales del STDP y redes IP, debe tenerse en cuenta que ENUM no es una función de VoIP sino que es un mecanismo de conversión entre números/identificadores. Por tanto no debe ser confundido con el uso normal de enrutar las llamadas de VoIP mediante los protocolos SIP y H.323. ENUM puede ser muy útil para aquellas organizaciones que quieran tener normalizada la manera en que las aplicaciones acceden a los datos de comunicación de cada usuario. FundamentosPara que la convergencia entre el Sistema Telefónico Disponible al Público (STDP) y la Telefonía por Internet o Voz sobre IP (VoIP) y que el desarrollo de nuevos servicios multimedia tengan menos obstáculos, es fundamental que los usuarios puedan realizar sus llamadas tal como están acostumbrados a hacerlo, marcando números. Para eso, es preciso que haya un sistema universal de correspondencia de número a direcciones IP (y viceversa) y que las diferentes redes se puedan interconectar. Hay varias fórmulas que permiten que un número telefónico sirva para establecer comunicación con múltiples servicios. Una de estas fórmulas es el Electronic Number Mapping System ENUM, normalizado por el grupo de tareas especiales de ingeniería en Internet (IETF, Internet engineering task force), del que trata este artículo, que emplea la numeración E.164, los protocolos y la infraestructura telefónica para acceder indirectamente a diferentes servicios. Por tanto, se accede a un servicio mediante un identificador numérico universal: un número telefónico tradicional. ENUM permite comunicar las direcciones del mundo IP con las del mundo telefónico, y viceversa, sin problemas. Antes de entrar en mayores profundidades, conviene dar una breve pincelada para aclarar cómo se organiza la correspondencia entre números o URI. Para ello imaginemos una llamada que se inicia desde el servicio telefónico tradicional con destino a un número Enum. En ENUM Público, el abonado o usuario Enum a quien va destinada lallamada, habrá decidido incluir en la base de datos Enum uno o varios URI o números E.164, que forman una lista con sus preferencias para terminar la llamada. Y el sistema como se explica más adelante, elegirá cual es el número o URI adecuado para dicha terminación. Por tanto como resultado de la consulta a la base dedatos Enum siempre se da una relación unívoca entre el número Enum marcado y el de terminación, conforme a los deseos de la persona llamada.Variedades de ENUMUna posible fuente de confusión cuando se trata sobre ENUM es la variedad de soluciones o sistemas que emplean este calificativo. Lo habitual es que cuando se haga una referencia a ENUM se trate de uno de los siguientes casos: ENUM Público: Es la visión original de ENUM, como base de datos pública, parecida a un directorio, donde el abonado "opta" a ser incluido en la base de datos, que está gestionada en el dominio e164.arpa, delegando a cada país la gestión de la base de datos y la numeración. También se conoce como ENUM de usuario. Carrier ENUM, o ENUM Infraestructura, o de Operador: Cuando grupos de operadores proveedores de servicios de comunicaciones electrónicas acuerdan compartir la información de los abonados por medio de ENUM mediante acuerdos privados. En este caso son los operadores quienes controlan la información del abonado en vez de hacerlo (optar) los propios abonados. Carrier ENUM o ENUM de Operador también se conoce como Infrastructure ENUM o ENUM Infraestructura, y está siendo normalizado por IETF para la interconexión de VoIP (mediante acuerdos de peering). Como se explicará en la correspondiente sección, también se puede utilizar para la portabilidad o conservación de número. ENUM Privado: Un operador de telefonía o de VoIP, o un ISP, o un gran usuario, puede utilizar las técnicas de ENUM en sus redes y en las de sus clientes sin emplear DNS públicos, con DNS privados o internos. Resulta fácil imaginar como puede utilizarse esta técnica para que compañías multinacionales, o bancos, o agencias de viajes, tengan planes de numeración muy coherentes y eficaces. Cómo funciona ENUMPara conocer cómo funciona Enum, le remitimos a la página correspondiente a ENUM Público, puesto que esa variedad de Enum es la típica, la que dió lugar a todos los procedimientos y normas de IETF .Más detalles sobre: @page { margin: 0.79in } P { margin-bottom: 0.08in } H4 { margin-bottom: 0.08in } H4.ctl { font-family: "Lohit Hindi" } A:link { so-language: zxx } -- ENUM Público. En esta página se explica con cierto detalle como funciona Enum Carrier ENUM o ENUM de Operador ENUM Privado Normas técnicas: RFC 2915: NAPTR RR. The Naming Authority Pointer (NAPTR) DNS Resource Record RFC 3761: ENUM Protocol. The E.164 to Uniform Resource Identifiers (URI) Dynamic Delegation Discovery System (DDDS) Application (ENUM). (obsoletes RFC 2916). RFC 3762: Usage of H323 addresses in ENUM Protocol RFC 3764: Usage of SIP addresses in ENUM Protocol RFC 3824: Using E.164 numbers with SIP RFC 4769: IANA Registration for an Enumservice Containing Public Switched Telephone Network (PSTN) Signaling Information RFC 3026: Berlin Liaison Statement RFC 3953: Telephone Number Mapping (ENUM) Service Registration for Presence Services RFC 2870: Root Name Server Operational Requirements RFC 3482: Number Portability in the Global Switched Telephone Network (GSTN): An Overview RFC 2168: Resolution of Uniform Resource Identifiers using the Domain Name System Organizaciones relacionadas con ENUM RIPE - Adimistrador del nivel 0 de ENUM e164.arpa. ITU-T TSB - Unión Internacional de Telecomunicaciones ETSI - European Telecommunications Standards Institute VisionNG - Administrador del rango ENUM 878-10 IETF ENUM Chapter

  Read the article

• What is the fastest way to create a checksum for large files in C#

  - by crono

  Hi, I have to sync large files across some machines. The files can be up to 6GB in size. The sync will be done manually every few weeks. I cant take the filename into consideration because they can change anytime. My plan is to create checksums on the destination PC and on the source PC and than copy all files with a checksum, which are not already in the destination, to the destination. My first attempt was something like this: using System.IO; using System.Security.Cryptography; private static string GetChecksum(string file) { using (FileStream stream = File.OpenRead(file)) { SHA256Managed sha = new SHA256Managed(); byte[] checksum = sha.ComputeHash(stream); return BitConverter.ToString(checksum).Replace("-", String.Empty); } } The Problem was the runtime: - with SHA256 with a 1,6 GB File - 20 minutes - with MD5 with a 1,6 GB File - 6.15 minutes Is there a better - faster - way to get the checksum (maybe with a better hash function)?

  Read the article

• SHA256 in T-sql stored procedure

  - by WOPR

  Is it possible to generate a SHA-256 hash of a string from a stored procedure in Sql Server 2008?

  Read the article

• What is an s2k algorithm?

  - by WilliamKF

  What is the definition of an s2k algorithm? For example, "PBKDF2(SHA-1)" is an s2k algorithm. Here is some Botan code that refers to s2k: AutoSeeded_RNG rng; std::auto_ptr<S2K> s2k(get_s2k("PBKDF2(SHA-1)")); s2k->set_iterations(8192); s2k->new_random_salt(rng, 8); SymmetricKey bc_key = s2k->derive_key(key_len, "BLK" + passphrase); InitializationVector iv = s2k->derive_key(iv_len, "IVL" + passphrase); SymmetricKey mac_key = s2k->derive_key(16, "MAC" + passphrase); Also, what is a 'salt' in s2k?

  Read the article

• Problems with South/Django: not recognizing the Django App

  - by christmasgorilla

  I've got a Django project on my machine and when I try to use South to migrate the data schema, I get several odd errors. Example: $ python manage.py convert_to_south thisLocator /Library/Python/2.6/site-packages/registration/models.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead import sha /Users/cm/code/thisLocator/../thisLocator/batches/models.py:6: DeprecationWarning: the md5 module is deprecated; use hashlib instead import md5 There is no enabled application matching 'thisLocator'. I've followed the South documentation. Settings.py has it in the installed apps, I can run import south from the manage.py shell. Everyone else on my team is calling the app thisLocator. Am I doing something really stupid?

  Read the article

• AppEngine dev_appserver.py aborts with no error message

  - by Gj

  I have an app which works well live on AppEngine. However, when I try to run it locally with the dev_appserver.py, it aborts within ~1 second with: ~/ dev_appserver.py --debug_imports myapp /opt/local/share/google_appengine/google/appengine/api/datastore_file_stub.py:40: DeprecationWarning: the md5 module is deprecated; use hashlib instead import md5 /opt/local/share/google_appengine/google/appengine/api/memcache/__init__.py:31: DeprecationWarning: the sha module is deprecated; use the hashlib module instead import sha I'm on OS X 10.6.3, Python 2.6.4 + Django 1.1.1 + appengine 1.3.1 (all installed via macports) Any ideas? Thanks!

  Read the article

• Git: getting the ref of a commit by day?

  - by Joseph Silvashy

  How can I get the sha ref of a commit on a certain day?

  Read the article

• Is nothing truly ever deleted in git?

  - by allenskd

  I'm currently learning git, usually I'm a bit skeptic of VCS since I have a hard time getting used to them. I deleted a branch called "experimental" with some tmp files, I saw the files removed in my working directory so I scratched my head and wondered if this is normal, can I bring it back in case I need it again, etc. I found the SHA making the commit of the tmp files and recreated the branch with the provided sha and saw it again with all the files and their current content. Everything I do in the working directory can be reverted once I commit it? Might seem like a silly question to many people, but it kinda intrigues me so I want to know the limits

  Read the article

• hash password in SQL Server (asp.net)

  - by ile

  Is this how hashed password stored in SQL Server should look like? This is function I use to hash password (I found it in some tutorial) public string EncryptPassword(string password) { //we use codepage 1252 because that is what sql server uses byte[] pwdBytes = Encoding.GetEncoding(1252).GetBytes(password); byte[] hashBytes = System.Security.Cryptography.MD5.Create().ComputeHash(pwdBytes); return Encoding.GetEncoding(1252).GetString(hashBytes); } EDIT I tried to use sha-1 and now strings seem to look like as they are suppose to: public string EncryptPassword(string password) { return FormsAuthentication.HashPasswordForStoringInConfigFile(password, "sha1"); } // example output: 39A43BDB7827112409EFED3473F804E9E01DB4A8 Result from the image above looks like broken string, but this sha-1 looks normal.... Will this be secure enough?

  Read the article

• Question about the mathematical properties of hashes

  - by levand

  Take a commonly used binary hash function - for example, SHA-256. As the name implies, it outputs a 256 bit value. Let A be the set of all possible 256 bit binary values. A is extremely large, but finite. Let B be the set of all possible binary values. B is infinite. Let C be the set of values obtained by running SHA-256 on every member of B. Obviously this can't be done in practice, but I'm guessing we can still do mathematical analysis of it. My Question: By necessity, C ? A. But does C = A?

  Read the article

• Sending passwords over the web

  - by Falmarri

  So I'm working on a mobile platform application that I'd like to have users authenticate over the web. I was wondering the best way to do security. The user is sending a password for HTTP to a php server wich authenticates against a mysql database on the same server. Obviously I don't want to send the password in plain text over the internet, but I also don't want to do 2 SHA hashes. This is what the server looks like (in pseudocode) $pass = $_POST['pass']; if ((get PASSWORD where USERNAME = USERNAME) == SHA($pass)) return PASS; This is pretty standard and I don't think there's any other way to do this. But I was wondering how I should prepare the data before sending it over the internet.

  Read the article

• Checksum fail on visual studio 2010 Trial RTM

  - by Medo

  I'm getting 7790db7d2aac9e1ee8baa34d42988577689c9e7a should be SHA-1: 0x8371f6a8d090063fcc320617e94854374633df3c Am I the only one?

  Read the article

• Best way to convert between [Char] and [Word8]?

  - by cmars232

  I'm new to Haskell and I'm trying to use a pure SHA1 implementation in my app (Data.Digest.Pure.SHA) with a JSON library (AttoJSON). AttoJSON uses Data.ByteString.Char8 bytestrings, SHA uses Data.ByteString.Lazy bytestrings, and some of my string literals in my app are [Char]. This article seems to indicate this is something still being worked out in the Haskell language/Prelude: http // hackage.haskell.org/trac/haskell-prime/wiki/CharAsUnicode And this one lists a few libraries but its a couple years old: http //blog.kfish.org/2007/10/survey-haskell-unicode-support.html [Links broken because SO doesn't trust me -- whatever...] What is the current best way to convert between these types, and what are some of the tradeoffs? I don't want to pick something that is obsolete... Thanks!

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >