Search Results

Search found 2374 results on 95 pages for 'stops'.

Page 89/95 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

  • Expert iptables help needed?

    - by Asad Moeen
    After a detailed analysis, I collected these details. I am under a UDP Flood which is more of application dependent. I run a Game-Server and an attacker is flooding me with "getstatus" query which makes the GameServer respond by making the replies to the query which cause output to the attacker's IP as high as 30mb/s and server lag. Here are the packet details, Packet starts with 4 bytes 0xff and then getstatus. Theoretically, the packet is like "\xff\xff\xff\xffgetstatus " Now that I've tried a lot of iptables variations like state and rate-limiting along side but those didn't work. Rate Limit works good but only when the Server is not started. As soon as the server starts, no iptables rule seems to block it. Anyone else got more solutions? someone asked me to contact the provider and get it done at the Network/Router but that looks very odd and I believe they might not do it since that would also affect other clients. Responding to all those answers, I'd say: Firstly, its a VPS so they can't do it for me. Secondly, I don't care if something is coming in but since its application generated so there has to be a OS level solution to block the outgoing packets. At least the outgoing ones must be stopped. Secondly, its not Ddos since just 400kb/s input generates 30mb/s output from my GameServer. That never happens in a D-dos. Asking the provider/hardware level solution should be used in that case but this one is different. And Yes, Banning his IP stops the flood of outgoing packets but he has many more IP-Addresses as he spoofs his original so I just need something to block him automatically. Even tried a lot of Firewalls but as you know they are just front-ends to iptables so if something doesn't work on iptables, what would the firewalls do? These were the rules I tried, iptables -A INPUT -p udp -m state --state NEW -m recent --set --name DDOS --rsource iptables -A INPUT -p udp -m state --state NEW -m recent --update --seconds 1 --hitcount 5 --name DDOS --rsource -j DROP It works for the attacks on un-used ports but when the server is listening and responding to the incoming queries by the attacker, it never works. Okay Tom.H, your rules were working when I modified them somehow like this: iptables -A INPUT -p udp -m length --length 1:1024 -m recent --set --name XXXX --rsource iptables -A INPUT -p udp -m string --string "xxxxxxxxxx" --algo bm --to 65535 -m recent --update --seconds 1 --hitcount 15 --name XXXX --rsource -j DROP They worked for about 3 days very good where the string "xxxxxxxxx" would be rate-limited, blocked if someone flooded and also didn't affect the clients. But just today, I tried updating the chain to try to remove a previously blocked IP so for that I had to flush the chain and restore this rule ( iptables -X and iptables -F ), some clients were already connected to servers including me. So restoring the rules now would also block some of the clients string completely while some are not affected. So does this mean I need to restart the server or why else would this happen because the last time the rules were working, there was no one connected?

    Read the article

  • Computer makes hissing noise, turns off after few seconds

    - by Kaustubh P
    I have a problem similar to the questions posted here and here. This is my config: Asus M3N78-EM, with AMD Phenom X3 720 2800 Black Edition, 4GB Transcend DDR2 RAM, Nvidia 9400GT. HD is a 160 GB IDE, and a LG IDE DVD-ROM. The power button is a bit off, I have removed the cover of the switch, and the only way it turns on is just giving the "stick" under the cover a gentle press. It turns on sometimes, and at other times, I have to cut-off the power from the PSU, and try again. I will describe my problem in as detail as possible, please bear with me: The problem has started in the last week, a few months after I changed the to the powerswitch arrangement as described above. The PC makes a hissing noise, and I wasn't able to pin-point the noise source, because of the various other fans. At first, removing the HD, rebooting w/o the HD, turning it off, reconnecting and booting made the problem go away. But of late, it doesn't happen. As suggested in the other questions, I tried reducing the load by disconnecting both the IDE drives, and the problem (noise + turn-off) still occurs. I also connected another 80G IDE HD,today morning, adn it still made that noise, and turned off. I also opened up the PSU, but I couldn't see any fault in that, I tried rotating the fan by blowing into the blades, and with my fingers, but the hissing noise didn't come from there. Or maybe the speed wasn't enough to evoke that noise. A few weeks ago: I had cleaned the Cabinet and had repasted the processor and its fan using some thermal paste. Could that be at fault? I also used a vacuum to blow the dust out of the PSU, could the power have been too much, to maybe offset the fan or something? A label on the PSU says it uses a ball-bearing fan. That only leaves me with the Processor fan and the processor itself. I didn't try removing the processor fan and processor from the motherboard, and then turning the PC on, fearing damage. Will doing so cause any damage? What can I do to localize and pin-point the problem? Also, after a few tries, the Computer starts up. Sometimes it turns of within 2 seconds, sometimes after the POST. Once it turned off at the grub. Another time it booted completely and then turned off. The only way to ensure that the PC wont turn off, is if the hissing noise stops. EDIT: I suspect it to be the Processor/Processor fan, owing to the source of noise. All the config, except for the Cabinet, is just over a year old. EDIT2: I also just remembered, that I had set the "On-power resume" to turn on, i.e. If I supply he PC with power, it will turn itself on, w/o me needing to press the switch. I had done that to workaround the faulty power-switch, as noted above. EDIT3: I calculated the power my system needs, from the antec site, and I just arrived at 292W

    Read the article

  • Call to daemon in a /etc/init.d script is blocking, not running in background

    - by tony
    I have a Perl script that I want to daemonize. Basically this perl script will read a directory every 30 seconds, read the files that it finds and then process the data. To keep it simple here consider the following Perl script (called synpipe_server, there is a symbolic link of this script in /usr/sbin/) : #!/usr/bin/perl use strict; use warnings; my $continue = 1; $SIG{'TERM'} = sub { $continue = 0; print "Caught TERM signal\n"; }; $SIG{'INT'} = sub { $continue = 0; print "Caught INT signal\n"; }; my $i = 0; while ($continue) { #do stuff print "Hello, I am running " . ++$i . "\n"; sleep 3; } So this script basically prints something every 3 seconds. Then, as I want to daemonize this script, I've also put this bash script (also called synpipe_server) in /etc/init.d/ : #!/bin/bash # synpipe_server : This starts and stops synpipe_server # # chkconfig: 12345 12 88 # description: Monitors all production pipelines # processname: synpipe_server # pidfile: /var/run/synpipe_server.pid # Source function library. . /etc/rc.d/init.d/functions pname="synpipe_server" exe="/usr/sbin/synpipe_server" pidfile="/var/run/${pname}.pid" lockfile="/var/lock/subsys/${pname}" [ -x $exe ] || exit 0 RETVAL=0 start() { echo -n "Starting $pname : " daemon ${exe} RETVAL=$? PID=$! echo [ $RETVAL -eq 0 ] && touch ${lockfile} echo $PID > ${pidfile} } stop() { echo -n "Shutting down $pname : " killproc ${exe} RETVAL=$? echo if [ $RETVAL -eq 0 ]; then rm -f ${lockfile} rm -f ${pidfile} fi } restart() { echo -n "Restarting $pname : " stop sleep 2 start } case "$1" in start) start ;; stop) stop ;; status) status ${pname} ;; restart) restart ;; *) echo "Usage: $0 {start|stop|status|restart}" ;; esac exit 0 So, (if I have well understood the doc for daemon) the Perl script should run in the background and the output should be redirected to /dev/null if I execute : service synpipe_server start But here is what I get instead : [root@master init.d]# service synpipe_server start Starting synpipe_server : Hello, I am running 1 Hello, I am running 2 Hello, I am running 3 Hello, I am running 4 Caught INT signal [ OK ] [root@master init.d]# So it starts the Perl script but runs it without detaching it from the current terminal session, and I can see the output printed in my console ... which is not really what I was expecting. Moreover, the PID file is empty (or with a line feed only, no pid returned by daemon). Does anyone have any idea of what I am doing wrong ? EDIT : maybe I should say that I am on a Red Hat machine. Scientific Linux SL release 5.4 (Boron) Would it do the job if instead of using the daemon function, I use something like : nohup ${exe} >/dev/null 2>&1 & in the init script ?

    Read the article

  • Console Hangs when Attempting to Deploy Software Updates

    - by JCardenas
    When in the SCCM 2012 console under Software Updates, I click Deploy on a Software Update Group and the console hangs indefinitely. It just stops; I click away and back and Windows does not recognize that the console has stopped responding. I end up having to kill the console through Task Manager. I have left the console for hours and it never becomes responsive again. I have tried removing and reinstalling the SUP, without success. Server reboots do not help, either. The issue with the console occurs both on my desktop, and directly on the site server itself. Any ideas? I've checked server logs and found nothing that would be indicative of a problem. Update: I managed to find something from the SMSAdminUI.log file: [1, PID:820][10/12/2012 08:59:26] :Disposed ResultObject was passed to update delegate, ignoring but refresh operation may not complete correctly [14, PID:820][10/12/2012 13:53:57] :System.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode) at System.Management.ManagementObject.Initialize(Boolean getObject) at System.Management.ManagementBaseObject.get_wbemObject() at System.Management.PropertyData.RefreshPropertyInfo() at System.Management.PropertyDataCollection.get_Item(String propertyName) at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName) at System.Management.ManagementBaseObject.get_Item(String propertyName) at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details: instance of __ExtendedStatus { Operation = "GetObject"; ParameterInfo = "SMS_PackageToContent.ContentID=16794374,PackageID=\"CA100065\""; ProviderName = "WinMgmt"; }; \r\n [14, PID:820][10/12/2012 13:53:57] :(SMS_PackageToContent.ContentID=16794374,PackageID='CA100065') does not exist or its IsContentValid returns false. We will (re)download this content. [14, PID:820][10/12/2012 13:54:01] :Successfully validated or downloaded update fcadb0ea-90ce-4aad-bc95-192450f05211! [14, PID:820][10/12/2012 13:54:02] :System.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode) at System.Management.ManagementObject.Initialize(Boolean getObject) at System.Management.ManagementBaseObject.get_wbemObject() at System.Management.PropertyData.RefreshPropertyInfo() at System.Management.PropertyDataCollection.get_Item(String propertyName) at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName) at System.Management.ManagementBaseObject.get_Item(String propertyName) at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details: instance of __ExtendedStatus { Operation = "GetObject"; ParameterInfo = "SMS_PackageToContent.ContentID=16787459,PackageID=\"CA100065\""; ProviderName = "WinMgmt"; }; \r\n [14, PID:820][10/12/2012 13:54:02] :(SMS_PackageToContent.ContentID=16787459,PackageID='CA100065') does not exist or its IsContentValid returns false. We will (re)download this content. [14, PID:820][10/12/2012 13:54:03] :Successfully validated or downloaded update eec264ac-fbc7-4cc4-891b-7cc6ab5bfe0e! [14, PID:820][10/12/2012 13:54:03] :System.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode) at System.Management.ManagementObject.Initialize(Boolean getObject) at System.Management.ManagementBaseObject.get_wbemObject() at System.Management.PropertyData.RefreshPropertyInfo() at System.Management.PropertyDataCollection.get_Item(String propertyName) at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName) at System.Management.ManagementBaseObject.get_Item(String propertyName) at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details: instance of __ExtendedStatus { Operation = "GetObject"; ParameterInfo = "SMS_PackageToContent.ContentID=16784547,PackageID=\"CA100065\""; ProviderName = "WinMgmt"; }; \r\n [14, PID:820][10/12/2012 13:54:03] :(SMS_PackageToContent.ContentID=16784547,PackageID='CA100065') does not exist or its IsContentValid returns false. We will (re)download this content. [14, PID:820][10/12/2012 13:54:05] :Successfully validated or downloaded update 8d780338-eec1-4d31-b1cd-6187400c02f3! [14, PID:820][10/12/2012 13:54:05] :System.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode) at System.Management.ManagementObject.Initialize(Boolean getObject) at System.Management.ManagementBaseObject.get_wbemObject() at System.Management.PropertyData.RefreshPropertyInfo() at System.Management.PropertyDataCollection.get_Item(String propertyName) at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName) at System.Management.ManagementBaseObject.get_Item(String propertyName) at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details: instance of __ExtendedStatus { Operation = "GetObject"; ParameterInfo = "SMS_PackageToContent.ContentID=16787423,PackageID=\"CA100065\""; ProviderName = "WinMgmt"; }; \r\n [14, PID:820][10/12/2012 13:54:05] :(SMS_PackageToContent.ContentID=16787423,PackageID='CA100065') does not exist or its IsContentValid returns false. We will (re)download this content.

    Read the article

  • Hard drive write speed - finding a lighter antivirus?

    - by Shingetsu
    I recently have been getting a lot of system lag here (for example, the mouse and the display in general take about 15 seconds to react in the worst cases). After a lot of monitoring the resources, I found that the problem mainly happens when too much Disk I/O is being done. Three culprits have been identified: My browser had the highest write I/O with 35,000,000 I/O Write Bytes. Steam had the highest read I/O (when IDLE!!!) with 106,000,000 I/O Read Bytes. My antivirus (in both cases I will soon mention) was the runner up in both cases with: 30,000,000ish write and 80,000,000ish read. The first AV I had was Avast! which I had liked on my previous system. After noticing it taking so much I/O I switched to Panda (supposing it wouldn't use TOO much during idle phase). However it only used a bit less I/O. Just a lot less memory and cpu and somewhat more network. My browser at the moment is Maxthon 3 (which I like a lot). Before this I was running chrome which had similar data and much higher cpu when running in the background was enabled. I'm not going to be running steam all the time and there aren't many alternatives to it. I like my browser very much, but I AM willing to switch if there's an obvious problem (I'm in programming, however I'm not a very good sysadmin, especially not when it comes to windows). Finally, my system almost stops lagging when I turn off the antivirus (and preferably steam) (some remains but once in every 5-6 hours for a few seconds so it isn't a big problem). My question (has a few parts): Is it possible to configure steam to lower it's I/O usage? (and maybe network while we're at it?) Which antivirus (very preferably free) uses lowest I/O while idle (I leave PC alone during active scans so that isn't a problem). Is there an obvious problem with my current browser and, if so, is there a way to fix it or should I switch and, if so, to what? (P.S. I've been on FFox for some time too). Info on system: Windows 7 (32 bit T_T, I am getting a new one in a few months but I want to keep using system during that time though). Hard Drive (main) is a Raid0. (Also have an external 1TB one which contains steam (and steam alone). As such it doesn't get used by much anything other than steam and isn't a very large problem. However steam still uses some I/O of registry) CPU: Intel(R) Core(TM)2 CPU [email protected] RAM: 6GB (3.25GB usable) (this and CPU have little effect as shown in next section) Additional info: Memory usage during problematic times: 44% CPU usage during problematic times: 35% Page File: main drive: system managed. 1TB drive: none. The current system I'm using is about 6 years old and is mainly a place holder while I await the new one in a few months. Final words: this is my 1st post on Super User (this question wouldn't feel right on Stack Overflow where I usually stay). If it doesn't have it's place here please tell me. If anything is wrong with it, same. Edit Technically I'm looking for a live thread detection program with minimal IO usage. I already have good active scan capability: Kaspersky (the free scanner uses the paid database) and MalwareBytes. Edit 2 Noticed another one, it seems that windows media player has been using stuff even when off! Turning it off and restarting now. If the problem is fixed I'll tell you guys. The reason I didn't notice it before was because I didn't have resource manager in front of me at the MOMENT of the problem. Now I did and it was at the very top of the list!

    Read the article

  • Installing Lubuntu 14.04.1 forcepae fails

    - by Rantanplan
    I tried to install Lubuntu 14.04.1 from a CD. First, I chose Try Lubuntu without installing which gave: ERROR: PAE is disabled on this Pentium M (PAE can potentially be enabled with kernel parameter "forcepae" ... Following the description on https://help.ubuntu.com/community/PAE, I used forcepae and tried Try Lubuntu without installing again. That worked fine. dmesg | grep -i pae showed: [ 0.000000] Kernel command line: file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- forcepae [ 0.008118] PAE forced! On the live-CD session, I tried installing Lubuntu double clicking on the install button on the desktop. Here, the CD starts running but then stops running and nothing happens. Next, I rebooted and tried installing Lubuntu directly from the boot menu screen using forcepae again. After a while, I receive the following error message: The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again. Hitting Enter brings me to the desktop. For what errors should I search? And how? Finally, I rebooted once more and tried Check disc for defects with forcepae option; no errors have been found. Now, I am wondering how to find the error or whether it would be better to follow advice c in https://help.ubuntu.com/community/PAE: "Move the hard disk to a computer on which the processor has PAE capability and PAE flag (that is, almost everything else than a Banias). Install the system as usual but don't add restricted drivers. After the install move the disk back." Thanks for some hints! Perhaps some of the following can help: On Lubuntu 12.04: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe up bts est tm2 bogomips : 1284.76 clflush size : 64 cache_alignment : 64 address sizes : 32 bits physical, 32 bits virtual power management: uname -a Linux humboldt 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:45:51 UTC 2014 i686 i686 i386 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.5 LTS Release: 12.04 Codename: precise cpuid eax in eax ebx ecx edx 00000000 00000002 756e6547 6c65746e 49656e69 00000001 000006d6 00000816 00000180 afe9f9bf 00000002 02b3b001 000000f0 00000000 2c04307d 80000000 80000004 00000000 00000000 00000000 80000001 00000000 00000000 00000000 00000000 80000002 20202020 20202020 65746e49 2952286c 80000003 6e655020 6d756974 20295228 7270204d 80000004 7365636f 20726f73 30352e31 007a4847 Vendor ID: "GenuineIntel"; CPUID level 2 Intel-specific functions: Version 000006d6: Type 0 - Original OEM Family 6 - Pentium Pro Model 13 - Stepping 6 Reserved 0 Brand index: 22 [not in table] Extended brand string: " Intel(R) Pentium(R) M processor 1.50GHz" CLFLUSH instruction cache line size: 8 Feature flags afe9f9bf: FPU Floating Point Unit VME Virtual 8086 Mode Enhancements DE Debugging Extensions PSE Page Size Extensions TSC Time Stamp Counter MSR Model Specific Registers MCE Machine Check Exception CX8 COMPXCHG8B Instruction SEP Fast System Call MTRR Memory Type Range Registers PGE PTE Global Flag MCA Machine Check Architecture CMOV Conditional Move and Compare Instructions FGPAT Page Attribute Table CLFSH CFLUSH instruction DS Debug store ACPI Thermal Monitor and Clock Ctrl MMX MMX instruction set FXSR Fast FP/MMX Streaming SIMD Extensions save/restore SSE Streaming SIMD Extensions instruction set SSE2 SSE2 extensions SS Self Snoop TM Thermal monitor 31 reserved TLB and cache info: b0: unknown TLB/cache descriptor b3: unknown TLB/cache descriptor 02: Instruction TLB: 4MB pages, 4-way set assoc, 2 entries f0: unknown TLB/cache descriptor 7d: unknown TLB/cache descriptor 30: unknown TLB/cache descriptor 04: Data TLB: 4MB pages, 4-way set assoc, 8 entries 2c: unknown TLB/cache descriptor On Lubuntu 14.04.1 live-CD with forcepae: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts est tm2 bogomips : 1284.68 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 32 bits virtual power management: uname -a Linux lubuntu 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 i686 i686 i686 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty cpuid CPU 0: vendor_id = "GenuineIntel" version information (1/eax): processor type = primary processor (0) family = Intel Pentium Pro/II/III/Celeron/Core/Core 2/Atom, AMD Athlon/Duron, Cyrix M2, VIA C3 (6) model = 0xd (13) stepping id = 0x6 (6) extended family = 0x0 (0) extended model = 0x0 (0) (simple synth) = Intel Pentium M (Dothan B1) / Celeron M (Dothan B1), 90nm miscellaneous (1/ebx): process local APIC physical ID = 0x0 (0) cpu count = 0x0 (0) CLFLUSH line size = 0x8 (8) brand index = 0x16 (22) brand id = 0x16 (22): Intel Pentium M, .13um feature information (1/edx): x87 FPU on chip = true virtual-8086 mode enhancement = true debugging extensions = true page size extensions = true time stamp counter = true RDMSR and WRMSR support = true physical address extensions = false machine check exception = true CMPXCHG8B inst. = true APIC on chip = false SYSENTER and SYSEXIT = true memory type range registers = true PTE global bit = true machine check architecture = true conditional move/compare instruction = true page attribute table = true page size extension = false processor serial number = false CLFLUSH instruction = true debug store = true thermal monitor and clock ctrl = true MMX Technology = true FXSAVE/FXRSTOR = true SSE extensions = true SSE2 extensions = true self snoop = true hyper-threading / multi-core supported = false therm. monitor = true IA64 = false pending break event = true feature information (1/ecx): PNI/SSE3: Prescott New Instructions = false PCLMULDQ instruction = false 64-bit debug store = false MONITOR/MWAIT = false CPL-qualified debug store = false VMX: virtual machine extensions = false SMX: safer mode extensions = false Enhanced Intel SpeedStep Technology = true thermal monitor 2 = true SSSE3 extensions = false context ID: adaptive or shared L1 data = false FMA instruction = false CMPXCHG16B instruction = false xTPR disable = false perfmon and debug = false process context identifiers = false direct cache access = false SSE4.1 extensions = false SSE4.2 extensions = false extended xAPIC support = false MOVBE instruction = false POPCNT instruction = false time stamp counter deadline = false AES instruction = false XSAVE/XSTOR states = false OS-enabled XSAVE/XSTOR = false AVX: advanced vector extensions = false F16C half-precision convert instruction = false RDRAND instruction = false hypervisor guest status = false cache and TLB information (2): 0xb0: instruction TLB: 4K, 4-way, 128 entries 0xb3: data TLB: 4K, 4-way, 128 entries 0x02: instruction TLB: 4M pages, 4-way, 2 entries 0xf0: 64 byte prefetching 0x7d: L2 cache: 2M, 8-way, sectored, 64 byte lines 0x30: L1 cache: 32K, 8-way, 64 byte lines 0x04: data TLB: 4M pages, 4-way, 8 entries 0x2c: L1 data cache: 32K, 8-way, 64 byte lines extended feature flags (0x80000001/edx): SYSCALL and SYSRET instructions = false execution disable = false 1-GB large page support = false RDTSCP = false 64-bit extensions technology available = false Intel feature flags (0x80000001/ecx): LAHF/SAHF supported in 64-bit mode = false LZCNT advanced bit manipulation = false 3DNow! PREFETCH/PREFETCHW instructions = false brand = " Intel(R) Pentium(R) M processor 1.50GHz" (multi-processing synth): none (multi-processing method): Intel leaf 1 (synth) = Intel Pentium M (Dothan B1), 90nm

    Read the article

  • C# 4: The Curious ConcurrentDictionary

    - by James Michael Hare
    In my previous post (here) I did a comparison of the new ConcurrentQueue versus the old standard of a System.Collections.Generic Queue with simple locking.  The results were exactly what I would have hoped, that the ConcurrentQueue was faster with multi-threading for most all situations.  In addition, concurrent collections have the added benefit that you can enumerate them even if they're being modified. So I set out to see what the improvements would be for the ConcurrentDictionary, would it have the same performance benefits as the ConcurrentQueue did?  Well, after running some tests and multiple tweaks and tunes, I have good and bad news. But first, let's look at the tests.  Obviously there's many things we can do with a dictionary.  One of the most notable uses, of course, in a multi-threaded environment is for a small, local in-memory cache.  So I set about to do a very simple simulation of a cache where I would create a test class that I'll just call an Accessor.  This accessor will attempt to look up a key in the dictionary, and if the key exists, it stops (i.e. a cache "hit").  However, if the lookup fails, it will then try to add the key and value to the dictionary (i.e. a cache "miss").  So here's the Accessor that will run the tests: 1: internal class Accessor 2: { 3: public int Hits { get; set; } 4: public int Misses { get; set; } 5: public Func<int, string> GetDelegate { get; set; } 6: public Action<int, string> AddDelegate { get; set; } 7: public int Iterations { get; set; } 8: public int MaxRange { get; set; } 9: public int Seed { get; set; } 10:  11: public void Access() 12: { 13: var randomGenerator = new Random(Seed); 14:  15: for (int i=0; i<Iterations; i++) 16: { 17: // give a wide spread so will have some duplicates and some unique 18: var target = randomGenerator.Next(1, MaxRange); 19:  20: // attempt to grab the item from the cache 21: var result = GetDelegate(target); 22:  23: // if the item doesn't exist, add it 24: if(result == null) 25: { 26: AddDelegate(target, target.ToString()); 27: Misses++; 28: } 29: else 30: { 31: Hits++; 32: } 33: } 34: } 35: } Note that so I could test different implementations, I defined a GetDelegate and AddDelegate that will call the appropriate dictionary methods to add or retrieve items in the cache using various techniques. So let's examine the three techniques I decided to test: Dictionary with mutex - Just your standard generic Dictionary with a simple lock construct on an internal object. Dictionary with ReaderWriterLockSlim - Same Dictionary, but now using a lock designed to let multiple readers access simultaneously and then locked when a writer needs access. ConcurrentDictionary - The new ConcurrentDictionary from System.Collections.Concurrent that is supposed to be optimized to allow multiple threads to access safely. So the approach to each of these is also fairly straight-forward.  Let's look at the GetDelegate and AddDelegate implementations for the Dictionary with mutex lock: 1: var addDelegate = (key,val) => 2: { 3: lock (_mutex) 4: { 5: _dictionary[key] = val; 6: } 7: }; 8: var getDelegate = (key) => 9: { 10: lock (_mutex) 11: { 12: string val; 13: return _dictionary.TryGetValue(key, out val) ? val : null; 14: } 15: }; Nothing new or fancy here, just your basic lock on a private object and then query/insert into the Dictionary. Now, for the Dictionary with ReadWriteLockSlim it's a little more complex: 1: var addDelegate = (key,val) => 2: { 3: _readerWriterLock.EnterWriteLock(); 4: _dictionary[key] = val; 5: _readerWriterLock.ExitWriteLock(); 6: }; 7: var getDelegate = (key) => 8: { 9: string val; 10: _readerWriterLock.EnterReadLock(); 11: if(!_dictionary.TryGetValue(key, out val)) 12: { 13: val = null; 14: } 15: _readerWriterLock.ExitReadLock(); 16: return val; 17: }; And finally, the ConcurrentDictionary, which since it does all it's own concurrency control, is remarkably elegant and simple: 1: var addDelegate = (key,val) => 2: { 3: _concurrentDictionary[key] = val; 4: }; 5: var getDelegate = (key) => 6: { 7: string s; 8: return _concurrentDictionary.TryGetValue(key, out s) ? s : null; 9: };                    Then, I set up a test harness that would simply ask the user for the number of concurrent Accessors to attempt to Access the cache (as specified in Accessor.Access() above) and then let them fly and see how long it took them all to complete.  Each of these tests was run with 10,000,000 cache accesses divided among the available Accessor instances.  All times are in milliseconds. 1: Dictionary with Mutex Locking 2: --------------------------------------------------- 3: Accessors Mostly Misses Mostly Hits 4: 1 7916 3285 5: 10 8293 3481 6: 100 8799 3532 7: 1000 8815 3584 8:  9:  10: Dictionary with ReaderWriterLockSlim Locking 11: --------------------------------------------------- 12: Accessors Mostly Misses Mostly Hits 13: 1 8445 3624 14: 10 11002 4119 15: 100 11076 3992 16: 1000 14794 4861 17:  18:  19: Concurrent Dictionary 20: --------------------------------------------------- 21: Accessors Mostly Misses Mostly Hits 22: 1 17443 3726 23: 10 14181 1897 24: 100 15141 1994 25: 1000 17209 2128 The first test I did across the board is the Mostly Misses category.  The mostly misses (more adds because data requested was not in the dictionary) shows an interesting trend.  In both cases the Dictionary with the simple mutex lock is much faster, and the ConcurrentDictionary is the slowest solution.  But this got me thinking, and a little research seemed to confirm it, maybe the ConcurrentDictionary is more optimized to concurrent "gets" than "adds".  So since the ratio of misses to hits were 2 to 1, I decided to reverse that and see the results. So I tweaked the data so that the number of keys were much smaller than the number of iterations to give me about a 2 to 1 ration of hits to misses (twice as likely to already find the item in the cache than to need to add it).  And yes, indeed here we see that the ConcurrentDictionary is indeed faster than the standard Dictionary here.  I have a strong feeling that as the ration of hits-to-misses gets higher and higher these number gets even better as well.  This makes sense since the ConcurrentDictionary is read-optimized. Also note that I tried the tests with capacity and concurrency hints on the ConcurrentDictionary but saw very little improvement, I think this is largely because on the 10,000,000 hit test it quickly ramped up to the correct capacity and concurrency and thus the impact was limited to the first few milliseconds of the run. So what does this tell us?  Well, as in all things, ConcurrentDictionary is not a panacea.  It won't solve all your woes and it shouldn't be the only Dictionary you ever use.  So when should we use each? Use System.Collections.Generic.Dictionary when: You need a single-threaded Dictionary (no locking needed). You need a multi-threaded Dictionary that is loaded only once at creation and never modified (no locking needed). You need a multi-threaded Dictionary to store items where writes are far more prevalent than reads (locking needed). And use System.Collections.Concurrent.ConcurrentDictionary when: You need a multi-threaded Dictionary where the writes are far more prevalent than reads. You need to be able to iterate over the collection without locking it even if its being modified. Both Dictionaries have their strong suits, I have a feeling this is just one where you need to know from design what you hope to use it for and make your decision based on that criteria.

    Read the article

  • The new workflow management of Oracle´s Hyperion Planning: Define more details with Planning Unit Hierarchies and Promotional Paths

    - by Alexandra Georgescu
    After having been almost unchanged for several years, starting with the 11.1.2 release of Oracle´s Hyperion Planning the Process Management has not only got a new name: “Approvals” now is offering the possibility to further split Planning Units (comprised of a unique Scenario-Version-Entity combination) into more detailed combinations along additional secondary dimensions, a so called Planning Unit Hierarchy, and also to pre-define a path of planners, reviewers and approvers, called Promotional Path. I´d like to introduce you to changes and enhancements in this new process management and arouse your curiosity for checking out more details on it. One reason of using the former process management in Planning was to limit data entry rights to one person at a time based on the assignment of a planning unit. So the lowest level of granularity for this assignment was, for a given Scenario-Version combination, the individual entity. Even if in many cases one person wasn´t responsible for all data being entered into that entity, but for only part of it, it was not possible to split the ownership along another additional dimension, for example by assigning ownership to different accounts at the same time. By defining a so called Planning Unit Hierarchy (PUH) in Approvals this gap is now closed. Complementing new Shared Services roles for Planning have been created in order to manage set up and use of Approvals: The Approvals Administrator consisting of the following roles: Approvals Ownership Assigner, who assigns owners and reviewers to planning units for which Write access is assigned (including Planner responsibilities). Approvals Supervisor, who stops and starts planning units and takes any action on planning units for which Write access is assigned. Approvals Process Designer, who can modify planning unit hierarchy secondary dimensions and entity members for which Write access is assigned, can also modify scenarios and versions that are assigned to planning unit hierarchies and can edit validation rules on data forms for which access is assigned. (this includes as well Planner and Ownership Assigner responsibilities) Set up of a Planning Unit Hierarchy is done under the Administration menu, by selecting Approvals, then Planning Unit Hierarchy. Here you create new PUH´s or edit existing ones. The following window displays: After providing a name and an optional description, a pre-selection of entities can be made for which the PUH will be defined. Available options are: All, which pre-selects all entities to be included for the definitions on the subsequent tabs None, manual entity selections will be made subsequently Custom, which offers the selection for an ancestor and the relative generations, that should be included for further definitions. Finally a pattern needs to be selected, which will determine the general flow of ownership: Free-form, uses the flow/assignment of ownerships according to Planning releases prior to 11.1.2 In Bottom-up, data input is done at the leaf member level. Ownership follows the hierarchy of approval along the entity dimension, including refinements using a secondary dimension in the PUH, amended by defined additional reviewers in the promotional path. Distributed, uses data input at the leaf level, while ownership starts at the top level and then is distributed down the organizational hierarchy (entities). After ownership reaches the lower levels, budgets are submitted back to the top through the approval process. Proceeding to the next step, now a secondary dimension and the respective members from that dimension might be selected, in order to create more detailed combinations underneath each entity. After selecting the Dimension and a Parent Member, the definition of a Relative Generation below this member assists in populating the field for Selected Members, while the Count column shows the number of selected members. For refining this list, you might click on the icon right beside the selected member field and use the check-boxes in the appearing list for deselecting members. -------------------------------------------------------------------------------------------------------- TIP: In order to reduce maintenance of the PUH due to changes in the dimensions included (members added, moved or removed) you should consider to dynamically link those dimensions in the PUH with the dimension hierarchies in the planning application. For secondary dimensions this is done using the check-boxes in the Auto Include column. For the primary dimension, the respective selection criteria is applied by right-clicking the name of an entity activated as planning unit, then selecting an item of the shown list of include or exclude options (children, descendants, etc.). Anyway in order to apply dimension changes impacting the PUH a synchronization must be run. If this is really necessary or not is shown on the first screen after selecting from the menu Administration, then Approvals, then Planning Unit Hierarchy: under Synchronized you find the statuses Yes, No or Locked, where the last one indicates, that another user is just changing or synchronizing the PUH. Select one of the not synchronized PUH´s (status No) and click the Synchronize option in order to execute. -------------------------------------------------------------------------------------------------------- In the next step owners and reviewers are assigned to the PUH. Using the icons with the magnifying glass right besides the columns for Owner and Reviewer the respective assignments can be made in the ordermthat you want them to review the planning unit. While it is possible to assign only one owner per entity or combination of entity+ member of the secondary dimension, the selection for reviewers might consist of more than one person. The complete Promotional Path, including the defined owners and reviewers for the entity parents, can be shown by clicking the icon. In addition optional users might be defined for being notified about promotions for a planning unit. -------------------------------------------------------------------------------------------------------- TIP: Reviewers cannot change data, but can only review data according to their data access permissions and reject or promote planning units. -------------------------------------------------------------------------------------------------------- In order to complete your PUH definitions click Finish - this saves the PUH and closes the window. As a final step, before starting the approvals process, you need to assign the PUH to the Scenario-Version combination for which it should be used. From the Administration menu select Approvals, then Scenario and Version Assignment. Expand the PUH in order to see already existing assignments. Under Actions click the add icon and select scenarios and versions to be assigned. If needed, click the remove icon in order to delete entries. After these steps, set up is completed for starting the approvals process. Start, stop and control of the approvals process is now done under the Tools menu, and then Manage Approvals. The new PUH feature is complemented by various additional settings and features; some of them at least should be mentioned here: Export/Import of PUHs: Out of Office agent: Validation Rules changing promotional/approval path if violated (including the use of User-defined Attributes (UDAs)): And various new and helpful reviewer actions with corresponding approval states. About the Author: Bernhard Kinkel started working for Hyperion Solutions as a Presales Consultant and Consultant in 1998 and moved to Hyperion Education Services in 1999. He joined Oracle University in 2007 where he is a Principal Education Consultant. Based on these many years of working with Hyperion products he has detailed product knowledge across several versions. He delivers both classroom and live virtual courses. His areas of expertise are Oracle/Hyperion Essbase, Oracle Hyperion Planning and Hyperion Web Analysis.

    Read the article

  • Launching a WPF Window in a Separate Thread, Part 1

    - by Reed
    Typically, I strongly recommend keeping the user interface within an application’s main thread, and using multiple threads to move the actual “work” into background threads.  However, there are rare times when creating a separate, dedicated thread for a Window can be beneficial.  This is even acknowledged in the MSDN samples, such as the Multiple Windows, Multiple Threads sample.  However, doing this correctly is difficult.  Even the referenced MSDN sample has major flaws, and will fail horribly in certain scenarios.  To ease this, I wrote a small class that alleviates some of the difficulties involved. The MSDN Multiple Windows, Multiple Threads Sample shows how to launch a new thread with a WPF Window, and will work in most cases.  The sample code (commented and slightly modified) works out to the following: // Create a thread Thread newWindowThread = new Thread(new ThreadStart( () => { // Create and show the Window Window1 tempWindow = new Window1(); tempWindow.Show(); // Start the Dispatcher Processing System.Windows.Threading.Dispatcher.Run(); })); // Set the apartment state newWindowThread.SetApartmentState(ApartmentState.STA); // Make the thread a background thread newWindowThread.IsBackground = true; // Start the thread newWindowThread.Start(); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This sample creates a thread, marks it as single threaded apartment state, and starts the Dispatcher on that thread. That is the minimum requirements to get a Window displaying and handling messages correctly, but, unfortunately, has some serious flaws. The first issue – the created thread will run continuously until the application shuts down, given the code in the sample.  The problem is that the ThreadStart delegate used ends with running the Dispatcher.  However, nothing ever stops the Dispatcher processing.  The thread was created as a Background thread, which prevents it from keeping the application alive, but the Dispatcher will continue to pump dispatcher frames until the application shuts down. In order to fix this, we need to call Dispatcher.InvokeShutdown after the Window is closed.  This would require modifying the above sample to subscribe to the Window’s Closed event, and, at that point, shutdown the Dispatcher: // Create a thread Thread newWindowThread = new Thread(new ThreadStart( () => { Window1 tempWindow = new Window1(); // When the window closes, shut down the dispatcher tempWindow.Closed += (s,e) => Dispatcher.CurrentDispatcher.BeginInvokeShutdown(DispatcherPriority.Background); tempWindow.Show(); // Start the Dispatcher Processing System.Windows.Threading.Dispatcher.Run(); })); // Setup and start thread as before This eliminates the first issue.  Now, when the Window is closed, the new thread’s Dispatcher will shut itself down, which in turn will cause the thread to complete. The above code will work correctly for most situations.  However, there is still a potential problem which could arise depending on the content of the Window1 class.  This is particularly nasty, as the code could easily work for most windows, but fail on others. The problem is, at the point where the Window is constructed, there is no active SynchronizationContext.  This is unlikely to be a problem in most cases, but is an absolute requirement if there is code within the constructor of Window1 which relies on a context being in place. While this sounds like an edge case, it’s fairly common.  For example, if a BackgroundWorker is started within the constructor, or a TaskScheduler is built using TaskScheduler.FromCurrentSynchronizationContext() with the expectation of synchronizing work to the UI thread, an exception will be raised at some point.  Both of these classes rely on the existence of a proper context being installed to SynchronizationContext.Current, which happens automatically, but not until Dispatcher.Run is called.  In the above case, SynchronizationContext.Current will return null during the Window’s construction, which can cause exceptions to occur or unexpected behavior. Luckily, this is fairly easy to correct.  We need to do three things, in order, prior to creating our Window: Create and initialize the Dispatcher for the new thread manually Create a synchronization context for the thread which uses the Dispatcher Install the synchronization context Creating the Dispatcher is quite simple – The Dispatcher.CurrentDispatcher property gets the current thread’s Dispatcher and “creates a new Dispatcher if one is not already associated with the thread.”  Once we have the correct Dispatcher, we can create a SynchronizationContext which uses the dispatcher by creating a DispatcherSynchronizationContext.  Finally, this synchronization context can be installed as the current thread’s context via SynchronizationContext.SetSynchronizationContext.  These three steps can easily be added to the above via a single line of code: // Create a thread Thread newWindowThread = new Thread(new ThreadStart( () => { // Create our context, and install it: SynchronizationContext.SetSynchronizationContext( new DispatcherSynchronizationContext( Dispatcher.CurrentDispatcher)); Window1 tempWindow = new Window1(); // When the window closes, shut down the dispatcher tempWindow.Closed += (s,e) => Dispatcher.CurrentDispatcher.BeginInvokeShutdown(DispatcherPriority.Background); tempWindow.Show(); // Start the Dispatcher Processing System.Windows.Threading.Dispatcher.Run(); })); // Setup and start thread as before This now forces the synchronization context to be in place before the Window is created and correctly shuts down the Dispatcher when the window closes. However, there are quite a few steps.  In my next post, I’ll show how to make this operation more reusable by creating a class with a far simpler API…

    Read the article

  • Hosting WCF service in Windows Service

    - by DigiMortal
    When building Windows services we often need a way to communicate with them. The natural way to communicate to service is to send signals to it. But this is very limited communication. Usually we need more powerful communication mechanisms with services. In this posting I will show you how to use service-hosted WCF web service to communicate with Windows service. Create Windows service Suppose you have Windows service created and service class is named as MyWindowsService. This is new service and all we have is default code that Visual Studio generates. Create WCF service Add reference to System.ServiceModel assembly to Windows service project and add new interface called IMyService. This interface defines our service contracts. [ServiceContract] public interface IMyService {     [OperationContract]     string SayHello(int value); } We keep this service simple so it is easy for you to follow the code. Now let’s add service implementation: [ServiceBehavior(InstanceContextMode=InstanceContextMode.Single)] public class MyService : IMyService {     public string SayHello(int value)     {         return string.Format("Hello, : {0}", value);     } } With ServiceBehavior attribute we say that we need only one instance of WCF service to serve all requests. Usually this is more than enough for us. Hosting WCF service in Windows Service Now it’s time to host our WCF service and make it available in Windows service. Here is the code in my Windows service: public partial class MyWindowsService : ServiceBase {     private ServiceHost _host;     private MyService _server;       public MyWindowsService()     {         InitializeComponent();     }       protected override void OnStart(string[] args)     {         _server = new MyService();         _host = new ServiceHost(_server);         _host.Open();     }       protected override void OnStop()     {         _host.Close();     } } Our Windows service now hosts our WCF service. WCF service will be available when Windows service is started and it is taken down when Windows service stops. Configuring WCF service To make WCF service usable we need to configure it. Add app.config file to your Windows service project and paste the following XML there: <system.serviceModel>   <serviceHostingEnvironment aspNetCompatibilityEnabled="true" />   <services>     <service name="MyWindowsService.MyService" behaviorConfiguration="def">       <host>         <baseAddresses>           <add baseAddress="http://localhost:8732/MyService/"/>         </baseAddresses>       </host>       <endpoint address="" binding="wsHttpBinding" contract="MyWindowsService.IMyService">       </endpoint>       <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>     </service>   </services>   <behaviors>     <serviceBehaviors>       <behavior name="def">         <serviceMetadata httpGetEnabled="True"/>         <serviceDebug includeExceptionDetailInFaults="True"/>       </behavior>     </serviceBehaviors>   </behaviors> </system.serviceModel> Now you are ready to test your service. Install Windows service and start it. Open your browser and open the following address: http://localhost:8732/MyService/ You should see your WCF service page now. Conclusion WCF is not only web applications fun. You can use WCF also as self-hosted service. Windows services that lack good communication possibilities can be saved by using WCF self-hosted service as it is the best way to talk to service. We can also revert the context and say that Windows service is good host for our WCF service.

    Read the article

  • Customize the Five Windows Folder Templates

    - by Mark Virtue
    Are you’re particular about the way Windows Explorer presents each folder’s contents? Here we show you how to take advantage of Explorer’s built-in templates, which cuts down the time it takes to do customizations. Note: The techniques in this article apply to Windows XP, Vista, and Windows 7. When opening a folder for the first time in Windows Explorer, we are presented with a standard default view of the files and folders in that folder. It may be that the items are presented are perfectly fine, but on the other hand, we may want to customize the view.  The aspects of it that we can customize are the following: The display type (list view, details, tiles, thumbnails, etc) Which columns are displayed, and in which order The widths of the visible columns The order in which the files and folders are sorted Any file groupings Thankfully, Windows offers us a shortcut.  A particular folder’s settings can be used as a “template” for other, similar folders.  In fact, we can store up to five separate sets of folder presentation configurations.  Once we save the settings for a particular template, that template can then be applied to other folders. Customize Your First Folder We’ll start by setting up the first of our templates – the default one.  Once we create this template and apply it, the vast majority of the folders in our file system will change to match it, so it’s important that we set it up very carefully.  The first step in creating and applying the template is to customize one folder with the settings that all the rest will have. Choose a folder that is typical of the folders that you wish to have this default template.  Select it in Windows Explorer.  To ensure that it is a suitable candidate, right-click the folder name and select Properties, then go to the Customize tab.  Ensure that this folder is marked as General Items.  If it is not, either choose a different folder or select General Items from the list. Click OK.  Now we’re ready to customize our first folder. Changing the way one single folder is presented is straightforward.  We start with the folder’s display type.  Click the Change your view button in the top-right corner of every Explorer window. Each time you click the button, the folder’s view cycles to the next view type.  Alternatively you can click the little down-arrow next to the button to see all the display types at once, and select the one you want. Click the view you want, or drag the slider next to the one you want. If you have chosen Details, then the next thing you may wish to change is which columns are displayed, and the order of these.  To choose which columns are displayed, simply right-click on any column heading.  A list of the columns currently being display appears. Simply uncheck a column if you don’t want it displayed, and check the columns that you want displayed.  If you want some information displayed about your files that is not listed here, then click the More… button for a full list of file attributes. There’s a lot of them! To change the order of the columns that are currently being displayed, simply click on a column heading and drag it to where you think it should be.  To change the width of a column, click the line that represents the right-hand edge of the column and drag it left or right. To sort by a column, click once on that column.  To reverse the sort-order, click that same column again. To change the groupings of the files in the folder, right-click in a blank area of the folder, select Group by, and select the appropriate column. Apply This Default Template to All Similar Folders Once you have the folder exactly the way you want it, we now use this folder as our default template for most of the folders in our file system.  To do this, ensure that you are still in the folder you just customized, and then, from the Organize menu in Explorer, click on Folder and search options. Then select the View tab and click the Apply to Folders button. After you’ve clicked OK, visit some of the other folders in your file system.  You should see that most have taken on these new settings. What we’ve just done, in effect, is we have customized the General Items template.  This is one of five templates that Windows Explorer uses to display folder contents.  The five templates are called (in Windows 7): General Items Documents Pictures Music Videos When a folder is opened, Windows Explorer examines the contents to see if it can automatically determine which folder template to use to display the folder contents.  If it is not obvious that the folder contents falls into any of the last four templates, then Windows Explorer chooses the General Items template.  That’s why most of the folders in your file system are shown using the General Items template. Changing the Other Four Templates If you want to adjust the other four templates, the process is very similar to what we’ve just done.  If you wanted to change the “Music” template, for example, the steps would be as follows: Select a folder that contains music items Apply the existing Music template to the folder (even if it doesn’t look like you want it to) Customize the folder to your personal preferences Apply the new template to all “Music” folders A fifth step would be:  When you open a folder that contains music items but is not automatically displayed using the Music template, you manually select the Music template for that folder. First, select a folder that contains music items.  It will probably be displayed using the existing Music template: Next, ensure that it is using the Music template.  If it’s not, then manually select the Music template. Next, customize the folder to suit your personal preferences (here we’ve added a couple of columns, and sorted by Artist). Now we can set this view to be our Music template.  Choose Organize, then the View tab, and click the Apply to Folders button. Note: The only folders that will inherit these settings are the ones that are currently (or will soon be) using the Music template. Now, if you have any folder that contains music items, and you want it to inherit all of these settings, then right-click the folder name, choose Properties, and select that this folder should use the Music template.  You can also cehck the box entitled Also apply this template to all subfolders if you want to save yourself even more time with all the sub-folders. Conclusion It’s neat to be able to set up templates for your folder views like this.  It’s a shame that Microsoft didn’t take the concept just a little further and allow you to create as many templates as you want. Similar Articles Productive Geek Tips Fix For When Windows Explorer in Vista Stops Showing File NamesCustomize the Windows 7 or Vista Send To MenuFix for New Contact Group Button Not Displaying in VistaWhy Did Windows Vista’s Music Folder Icon Turn Yellow?Make Your Last Minute Holiday Cards with Microsoft Word TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7

    Read the article

  • EM12c Release 4: New EMCLI Verbs

    - by SubinDaniVarughese
    Here are the new EM CLI verbs in Enterprise Manager 12c Release 4 (12.1.0.4). This helps you in writing new scripts or enhancing your existing scripts for further automation. Basic Administration Verbs invoke_ws - Invoke EM web service.ADM Verbs associate_target_to_adm - Associate a target to an application data model. export_adm - Export Application Data Model to a specified .xml file. import_adm - Import Application Data Model from a specified .xml file. list_adms - List the names, target names and application suites of existing Application Data Models verify_adm - Submit an application data model verify job for the target specified.Agent Update Verbs get_agent_update_status -  Show Agent Update Results get_not_updatable_agents - Shows Not Updatable Agents get_updatable_agents - Show Updatable Agents update_agents - Performs Agent Update Prereqs and submits Agent Update JobBI Publisher Reports Verbs grant_bipublisher_roles - Grants access to the BI Publisher catalog and features. revoke_bipublisher_roles - Revokes access to the BI Publisher catalog and features.Blackout Verbs create_rbk - Create a Retro-active blackout.CFW Verbs cancel_cloud_service_requests -  To cancel cloud service requests delete_cloud_service_instances -  To delete cloud service instances delete_cloud_user_objects - To delete cloud user objects. get_cloud_service_instances - To get information about cloud service instances get_cloud_service_requests - To get information about cloud requests get_cloud_user_objects - To get information about cloud user objects.Chargeback Verbs add_chargeback_entity - Adds the given entity to Chargeback. assign_charge_plan - Assign a plan to a chargeback entity. assign_cost_center - Assign a cost center to a chargeback entity. create_charge_entity_type - Create  charge entity type export_charge_plans - Exports charge plans metadata to file export_custom_charge_items -  Exports user defined charge items to a file import_charge_plans - Imports charge plans metadata from given file import_custom_charge_items -  Imports user defined charge items metadata from given file list_charge_plans - Gives a list of charge plans in Chargeback. list_chargeback_entities - Gives a list of all the entities in Chargeback list_chargeback_entity_types - Gives a list of all the entity types that are supported in Chargeback list_cost_centers - Lists the cost centers in Chargeback. remove_chargeback_entity - Removes the given entity from Chargeback. unassign_charge_plan - Un-assign the plan associated to a chargeback entity. unassign_cost_center - Un-assign the cost center associated to a chargeback entity.Configuration/Association History disable_config_history - Disable configuration history computation for a target type. enable_config_history - Enable configuration history computation for a target type. set_config_history_retention_period - Sets the amount of time for which Configuration History is retained.ConfigurationCompare config_compare - Submits the configuration comparison job get_config_templates - Gets all the comparison templates from the repositoryCompliance Verbs fix_compliance_state -  Fix compliance state by removing references in deleted targets.Credential Verbs update_credential_setData Subset Verbs export_subset_definition - Exports specified subset definition as XML file at specified directory path. generate_subset - Generate subset using specified subset definition and target database. import_subset_definition - Import a subset definition from specified XML file. import_subset_dump - Imports dump file into specified target database. list_subset_definitions - Get the list of subset definition, adm and target nameDelete pluggable Database Job Verbs delete_pluggable_database - Delete a pluggable databaseDeployment Procedure Verbs get_runtime_data - Get the runtime data of an executionDiscover and Push to Agents Verbs generate_discovery_input - Generate Discovery Input file for discovering Auto-Discovered Domains refresh_fa - Refresh Fusion Instance run_fa_diagnostics - Run Fusion Applications DiagnosticsFusion Middleware Provisioning Verbs create_fmw_domain_profile - Create a Fusion Middleware Provisioning Profile from a WebLogic Domain create_fmw_home_profile - Create a Fusion Middleware Provisioning Profile from an Oracle Home create_inst_media_profile - Create a Fusion Middleware Provisioning Profile from Installation MediaGold Agent Image Verbs create_gold_agent_image - Creates a gold agent image. decouple_gold_agent_image - Decouples the agent from gold agent image. delete_gold_agent_image - Deletes a gold agent image. get_gold_agent_image_activity_status -  Gets gold agent image activity status. get_gold_agent_image_details - Get the gold agent image details. list_agents_on_gold_image - Lists agents on a gold agent image. list_gold_agent_image_activities - Lists gold agent image activities. list_gold_agent_image_series - Lists gold agent image series. list_gold_agent_images - Lists the available gold agent images. promote_gold_agent_image - Promotes a gold agent image. stage_gold_agent_image - Stages a gold agent image.Incident Rules Verbs add_target_to_rule_set - Add a target to an enterprise rule set. delete_incident_record - Delete one or more open incidents remove_target_from_rule_set - Remove a target from an enterprise rule set. Job Verbs export_jobs - Export job details in to an xml file import_jobs - Import job definitions from an xml file job_input_file - Supply details for a job verb in a property file resume_job - Resume a job or set of jobs suspend_job - Suspend a job or set of jobs Oracle Database as Service Verbs config_db_service_target - Configure DB Service target for OPCPrivilege Delegation Settings Verbs clear_default_privilege_delegation_setting - Clears the default privilege delegation setting for a given list of platforms set_default_privilege_delegation_setting - Sets the default privilege delegation setting for a given list of platforms test_privilege_delegation_setting - Tests a Privilege Delegation Setting on a hostSSA Verbs cleanup_dbaas_requests - Submit cleanup request for failed request create_dbaas_quota - Create Database Quota for a SSA User Role create_service_template - Create a Service Template delete_dbaas_quota - Delete the Database Quota setup for a SSA User Role delete_service_template - Delete a given service template get_dbaas_quota - List the Database Quota setup for all SSA User Roles get_dbaas_request_settings - List the Database Request Settings get_service_template_detail - Get details of a given service template get_service_templates -  Get the list of available service templates rename_service_template -  Rename a given service template update_dbaas_quota - Update the Database Quota for a SSA User Role update_dbaas_request_settings - Update the Database Request Settings update_service_template -  Update a given service template. SavedConfigurations get_saved_configs  - Gets the saved configurations from the repository Server Generated Alert Metric Verbs validate_server_generated_alerts  - Server Generated Alert Metric VerbServices Verbs edit_sl_rule - Edit the service level rule for the specified serviceSiebel Verbs list_siebel_enterprises -  List Siebel enterprises currently monitored in EM list_siebel_servers -  List Siebel servers under a specified siebel enterprise update_siebel- Update a Siebel enterprise or its underlying serversSiteGuard Verbs add_siteguard_aux_hosts -  Associate new auxiliary hosts to the system configure_siteguard_lag -  Configure apply lag and transport lag limit for databases delete_siteguard_aux_host -  Delete auxiliary host associated with a site delete_siteguard_lag -  Erases apply lag or transport lag limit for databases get_siteguard_aux_hosts -  Get all auxiliary hosts associated with a site get_siteguard_health_checks -  Shows schedule of health checks get_siteguard_lag -  Shows apply lag or transport lag limit for databases schedule_siteguard_health_checks -  Schedule health checks for an operation plan stop_siteguard_health_checks -  Stops all future health check execution of an operation plan update_siteguard_lag -  Updates apply lag and transport lag limit for databasesSoftware Library Verbs stage_swlib_entity_files -  Stage files of an entity from Software Library to a host target.Target Data Verbs create_assoc - Creates target associations delete_assoc - Deletes target associations list_allowed_pairs - Lists allowed association types for specified source and destination list_assoc - Lists associations between source and destination targets manage_agent_partnership - Manages partnership between agents. Used for explicitly assigning agent partnershipsTrace Reports generate_ui_trace_report  -  Generate and download UI Page performance report (to identify slow rendering pages)VI EMCLI Verbs add_virtual_platform - Add Oracle Virtual PLatform(s). modify_virtual_platform - Modify Oracle Virtual Platform.To get more details about each verb, execute$ emcli help <verb_name>Example: $ emcli help list_assocNew resources in list verbThese are the new resources in EM CLI list verb :Certificates  WLSCertificateDetails Credential Resource Group  PreferredCredentialsDefaultSystemScope - Preferred credentials (System Scope)   PreferredCredentialsSystemScope - Target preferred credentialPrivilege Delegation Settings  TargetPrivilegeDelegationSettingDetails  - List privilege delegation setting details on a host  TargetPrivilegeDelegationSetting - List privilege delegation settings on a host   PrivilegeDelegationSettings  - Lists all Privilege Delegation Settings   PrivilegeDelegationSettingDetails - Lists details of  Privilege Delegation Settings To get more details about each resource, execute$ emcli list -resource="<resource_name>" -helpExample: $ emcli list -resource="PrivilegeDelegationSettings" -helpDeprecated Verbs:Agent Administration Verbs resecure_agent - Resecure an agentTo get the complete list of verbs, execute:$ emcli help Stay Connected: Twitter | Facebook | YouTube | Linkedin | Newsletter Download the Oracle Enterprise Manager 12c Mobile app

    Read the article

  • Developer’s Life – Attitude and Communication – They Can Cause Problems – Notes from the Field #027

    - by Pinal Dave
    [Note from Pinal]: This is a 27th episode of Notes from the Field series. The biggest challenge for anyone is to understand human nature. We human have so many things on our mind at any moment of time. There are cases when what we say is not what we mean and there are cases where what we mean we do not say. We do say and things as per our mood and our agenda in mind. Sometimes there are incidents when our attitude creates confusion in the communication and we end up creating a situation which is absolutely not warranted. In this episode of the Notes from the Field series database expert Mike Walsh explains a very crucial issue we face in our career, which is not technical but more to relate to human nature. Read on this may be the best blog post you might read in recent times. In this week’s note from the field, I’m taking a slight departure from technical knowledge and concepts explained. We’ll be back to it next week, I’m sure. Pinal wanted us to explain some of the issues we bump into and how we see some of our customers arrive at problem situations and how we have helped get them back on the right track. Often it is a technical problem we are officially solving – but in a lot of cases as a consultant, we are really helping fix some communication difficulties. This is a technical blog post and not an “advice column” in a newspaper – but the longer I am a consultant, the more years I add to my experience in technology the more I learn that the vast majority of the problems we encounter have “soft skills” included in the chain of causes for the issue we are helping overcome. This is not going to be exhaustive but I hope that sharing four pieces of advice inspired by real issues starts a process of searching for places where we can be the cause of these challenges and look at fixing them in ourselves. Or perhaps we can begin looking at resolving them in teams that we manage. I’ll share three statements that I’ve either heard, read or said and talk about some of the communication or attitude challenges highlighted by the statement. 1 – “But that’s the SAN Administrator’s responsibility…” I heard that early on in my consulting career when talking with a customer who had serious corruption and no good recent backups – potentially no good backups at all. The statement doesn’t have to be this one exactly, but the attitude here is an attitude of “my job stops here, and I don’t care about the intent or principle of why I’m here.” It’s also a situation of having the attitude that as long as there is someone else to blame, I’m fine…  You see in this case, the DBA had a suspicion that the backups were not being handled right.  They were the DBA and they knew that they had responsibility to ensure SQL backups were good to go – it’s a basic requirement of a production DBA. In my “As A DBA Where Do I start?!” presentation, I argue that is job #1 of a DBA. But in this case, the thought was that there was someone else to blame. Rather than create extra work and take on responsibility it was decided to just let it be another team’s responsibility. This failed the company, the company’s customers and no one won. As technologists – we should strive to go the extra mile. If there is a lack of clarity around roles and responsibilities and we know it – we should push to get it resolved. Especially as the DBAs who should act as the advocates of the data contained in the databases we are responsible for. 2 – “We’ve always done it this way, it’s never caused a problem before!” Complacency. I have to say that many failures I’ve been paid good money to help recover from would have not happened had it been for an attitude of complacency. If any thoughts like this have entered your mind about your situation you may be suffering from it. If, while reading this, you get this sinking feeling in your stomach about that one thing you know should be fixed but haven’t done it.. Why don’t you stop and go fix it then come back.. “We should have better backups, but we’re on a SAN so we should be fine really.” “Technically speaking that could happen, but what are the chances?” “We’ll just clean that up as a fast follow” ..and so on. In the age of tightening IT budgets, increased expectations of up time, availability and performance there is no room for complacency. Our customers and business units expect – no demand – the best. Complacency says “we will give you second best or hopefully good enough and we accept the risk and know this may hurt us later. Sometimes an organization will opt for “good enough” and I agree with the concept that at times the perfect can be the enemy of the good. But when we make those decisions in a vacuum and are not reporting them up and discussing them as an organization that is different. That is us unilaterally choosing to do something less than the best and purposefully playing a game of chance. 3 – “This device must accept interference from other devices but not create any” I’ve paraphrased this one – but it’s something the Federal Communications Commission – a federal agency in the United States that regulates electronic communication – requires of all manufacturers of any device that could cause or receive interference electronically. I blogged in depth about this here (http://www.straightpathsql.com/archives/2011/07/relationship-advice-from-the-fcc/) so I won’t go into much detail other than to say this… If we all operated more on the premise that we should do our best to not be the cause of conflict, and to be less easily offended and less upset when we perceive offense life would be easier in many areas! This doesn’t always cause the issues we are called in to help out. Not directly. But where we see it is in unhealthy relationships between the various technology teams at a client. We’ll see teams hoarding knowledge, not sharing well with others and almost working against other teams instead of working with them. If you trace these problems back far enough it often stems from someone or some group of people violating this principle from the FCC. To Sum It Up Technology problems are easy to solve. At Linchpin People we help many customers get past the toughest technological challenge – and at the end of the day it is really just a repeatable process of pattern based troubleshooting, logical thinking and starting at the beginning and carefully stepping through to the end. It’s easy at the end of the day. The tough part of what we do as consultants is the people skills. Being able to help get teams working together, being able to help teams take responsibility, to improve team to team communication? That is the difficult part, and we get to use the soft skills on every engagement. Work on professional development (http://professionaldevelopment.sqlpass.org/) and see continuing improvement here, not just with technology. I can teach just about anyone how to be an excellent DBA and performance tuner, but some of these soft skills are much more difficult to teach. If you want to get started with performance analytics and triage of virtualized SQL Servers with the help of experts, read more over at Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • remove duplicate source entry [closed]

    - by yosa
    Possible Duplicate: Duplicate sources.list entry but cannot find the duplicates? This is my source.list and seems fine to me # deb cdrom:[Ubuntu 12.04 LTS _Precise Pangolin_ - Release amd64 (20120425)]/ precise main restricted # deb cdrom:[Ubuntu 12.04 LTS _Precise Pangolin_ - Release amd64 (20120425)]/ dists/precise/restricted/binary-i386/ # deb cdrom:[Ubuntu 12.04 LTS _Precise Pangolin_ - Release amd64 (20120425)]/ dists/precise/main/binary-i386/ # deb cdrom:[Ubuntu 11.10]/ natty main restricted # deb cdrom:[Ubuntu 11.04 _Natty Narwhal_ - Release i386 (20110427.1)]/ natty main restricted # deb cdrom:[Ubuntu 11.10 _Oneiric Ocelot_ - Release amd64 (20111012)]/ dists/oneiric/main/binary-i386/ # deb cdrom:[Ubuntu 11.10 _Oneiric Ocelot_ - Release amd64 (20111012)]/ oneiric main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://archive.ubuntu.com/ubuntu precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://archive.ubuntu.com/ubuntu precise multiverse ## Uncomment the following two lines to add software from the 'backports' ## repository. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. # deb-src http://ma.archive.ubuntu.com/ubuntu/ natty-backports main restricted universe multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu natty partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu precise main deb http://archive.ubuntu.com/ubuntu precise-updates restricted main multiverse universe deb http://security.ubuntu.com/ubuntu/ precise-security restricted main multiverse universe deb http://archive.ubuntu.com/ubuntu precise main universe deb-src http://extras.ubuntu.com/ubuntu precise main # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb-src http://archive.ubuntu.com/ubuntu precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://archive.ubuntu.com/ubuntu precise-updates restricted deb-src http://archive.ubuntu.com/ubuntu precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb-src http://archive.ubuntu.com/ubuntu precise universe deb-src http://archive.ubuntu.com/ubuntu precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb-src http://archive.ubuntu.com/ubuntu precise multiverse deb-src http://archive.ubuntu.com/ubuntu precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise-backports main restricted universe multiverse deb-src http://archive.ubuntu.com/ubuntu precise-backports main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu precise-security main restricted deb-src http://archive.ubuntu.com/ubuntu precise-security main restricted deb http://archive.ubuntu.com/ubuntu precise-security universe deb-src http://archive.ubuntu.com/ubuntu precise-security universe deb http://archive.ubuntu.com/ubuntu precise-security multiverse deb-src http://archive.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu oneiric partner # deb-src http://archive.canonical.com/ubuntu oneiric partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. ## Major bug fix updates produced after the final release of the ## distribution. ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu precise partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. # deb http://packages.dotdeb.org stable all # deb-src http://packages.dotdeb.org stable all # deb http://ppa.launchpad.net/bean123ch/burg/ubuntu lucid main # deb-src http://ppa.launchpad.net/bean123ch/burg/ubuntu lucid main this is the error given by apt-get update which stops at 64% reading W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ precise/main amd64 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_precise_main_binary-amd64_Packages) W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ precise/universe amd64 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_precise_universe_binary-amd64_Packages) W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ precise/main i386 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages) W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ precise/universe i386 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_precise_universe_binary-i386_Packages) W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ precise-updates/restricted amd64 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_precise-updates_restricted_binary-amd64_Packages) W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ precise-updates/restricted i386 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_precise-updates_restricted_binary-i386_Packages)

    Read the article

  • Gnome Do not Launching

    - by PyRulez
    When I try running gnome do, I get this. chris@Chris-Ubuntu-Laptop:~$ gnome-do pgrep: invalid user name: -u and it is not writable Trying sudo: chris@Chris-Ubuntu-Laptop:~$ sudo gnome-do [NetworkService] Could not initialize Network Manager dbus: Unable to open the session message bus. [Error 17:54:30.122] [SystemService] Could not initialize dbus: Unable to open the session message bus. (Do:2401): Wnck-CRITICAL **: wnck_set_client_type got called multiple times. (Do:2401): libdo-WARNING **: Binding '<Super>space' failed! [Error 17:54:30.649] [AbstractKeyBindingService] Key "" is already mapped. Tomboy.NotesItemSource "Tomboy Notes" encountered an error in UpdateItems: System.TypeInitializationException: An exception was thrown by the type initializer for Tomboy.TomboyDBus ---> System.Exception: Unable to open the session message bus. ---> System.ArgumentNullException: Argument cannot be null. Parameter name: address at NDesk.DBus.Bus.Open (System.String address) [0x00000] in <filename unknown>:0 at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 at Tomboy.TomboyDBus..cctor () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at Tomboy.NotesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Firefox.PlacesItemSource "Firefox Places" encountered an error in UpdateItems: System.InvalidCastException: Cannot cast from source type to destination type. at Mono.Data.Sqlite.SqliteDataReader.VerifyType (Int32 i, DbType typ) [0x00000] in <filename unknown>:0 at Mono.Data.Sqlite.SqliteDataReader.GetString (Int32 i) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource+<LoadPlaceItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem].AddEnumerable (IEnumerable`1 enumerable) [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem]..ctor (IEnumerable`1 collection) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.ToArray[PlaceItem] (IEnumerable`1 source) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Do.Universe.Linux.GNOMESpecialLocationsItemSource "GNOME Special Locations" encountered an error in UpdateItems: System.IO.FileNotFoundException: Could not find file "/root/.gtk-bookmarks". File name: '/root/.gtk-bookmarks' at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean anonymous, FileOptions options) [0x00000] in <filename unknown>:0 at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.FileStream:.ctor (string,System.IO.FileMode,System.IO.FileAccess,System.IO.FileShare) at System.IO.File.OpenRead (System.String path) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path, System.Text.Encoding encoding, Boolean detectEncodingFromByteOrderMarks, Int32 bufferSize) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.StreamReader:.ctor (string) at Do.Universe.Linux.GNOMESpecialLocationsItemSource+<ReadBookmarkItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at Do.Universe.Linux.GNOMESpecialLocationsItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . ^[^\Full thread dump: "<unnamed thread>" tid=0x0xb7570700 this=0x0x56f18 thread handle 0x403 state : not waiting owns () at (wrapper managed-to-native) Mono.Unix.Native.Syscall.read (int,intptr,ulong) <0xffffffff> at Mono.Unix.Native.Syscall.read (int,void*,ulong) <0x00023> at Mono.Unix.UnixStream.Read (byte[],int,int) <0x0008b> at NDesk.DBus.Connection.ReadMessage () <0x0003c> at NDesk.DBus.Connection.Iterate () <0x0001b> at NDesk.DBus.BusG/<Init>c__AnonStorey0.<>m__0 (intptr,NDesk.GLib.IOCondition,intptr) <0x00033> at (wrapper native-to-managed) NDesk.DBus.BusG/<Init>c__AnonStorey0.<>m__0 (intptr,NDesk.GLib.IOCondition,intptr) <0xffffffff> at (wrapper managed-to-native) Gtk.Clipboard.gtk_clipboard_wait_is_text_available (intptr) <0xffffffff> at Gtk.Clipboard.WaitIsTextAvailable () <0x00017> at Do.Universe.SelectedTextItem.UpdateSelection (object,System.EventArgs) <0x00027> at Do.Platform.AbstractApplicationService.OnSummoned () <0x00025> at Do.Platform.ApplicationService.<ApplicationService>m__31 (object,System.EventArgs) <0x00013> at Do.Core.Controller.OnSummoned () <0x00025> at Do.Core.Controller.Summon () <0x00027> at Do.Do.Main (string[]) <0x001eb> at (wrapper runtime-invoke) <Module>.runtime_invoke_void_object (object,intptr,intptr,intptr) <0xffffffff> "<unnamed thread>" tid=0x0xb2c81b40 this=0x0x194150 thread handle 0x412 state : interrupted state owns () at (wrapper managed-to-native) System.IO.InotifyWatcher.ReadFromFD (intptr,byte[],intptr) <0xffffffff> at System.IO.InotifyWatcher.Monitor () <0x0005f> at System.Threading.Thread.StartInternal () <0x00057> at (wrapper runtime-invoke) object.runtime_invoke_void__this__ (object,intptr,intptr,intptr) <0xffffffff> "Universe Update Dispatcher" tid=0x0xb29ffb40 this=0x0x569d8 thread handle 0x41b state : interrupted state owns () at (wrapper managed-to-native) System.Threading.WaitHandle.WaitOne_internal (System.Threading.WaitHandle,intptr,int,bool) <0xffffffff> at System.Threading.WaitHandle.WaitOne (System.TimeSpan,bool) <0x00133> at System.Threading.WaitHandle.WaitOne (System.TimeSpan) <0x00022> at Do.Core.UniverseManager.UniverseUpdateLoop () <0x0007a> at System.Threading.Thread.StartInternal () <0x00057> at (wrapper runtime-invoke) object.runtime_invoke_void__this__ (object,intptr,intptr,intptr) <0xffffffff> Tomboy.NotesItemSource "Tomboy Notes" encountered an error in UpdateItems: System.TypeInitializationException: An exception was thrown by the type initializer for Tomboy.TomboyDBus ---> System.Exception: Unable to open the session message bus. ---> System.ArgumentNullException: Argument cannot be null. Parameter name: address at NDesk.DBus.Bus.Open (System.String address) [0x00000] in <filename unknown>:0 at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 at Tomboy.TomboyDBus..cctor () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at Tomboy.NotesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Firefox.PlacesItemSource "Firefox Places" encountered an error in UpdateItems: System.InvalidCastException: Cannot cast from source type to destination type. at Mono.Data.Sqlite.SqliteDataReader.VerifyType (Int32 i, DbType typ) [0x00000] in <filename unknown>:0 at Mono.Data.Sqlite.SqliteDataReader.GetString (Int32 i) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource+<LoadPlaceItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem].AddEnumerable (IEnumerable`1 enumerable) [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem]..ctor (IEnumerable`1 collection) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.ToArray[PlaceItem] (IEnumerable`1 source) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Do.Universe.Linux.GNOMESpecialLocationsItemSource "GNOME Special Locations" encountered an error in UpdateItems: System.IO.FileNotFoundException: Could not find file "/root/.gtk-bookmarks". File name: '/root/.gtk-bookmarks' at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean anonymous, FileOptions options) [0x00000] in <filename unknown>:0 at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.FileStream:.ctor (string,System.IO.FileMode,System.IO.FileAccess,System.IO.FileShare) at System.IO.File.OpenRead (System.String path) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path, System.Text.Encoding encoding, Boolean detectEncodingFromByteOrderMarks, Int32 bufferSize) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.StreamReader:.ctor (string) at Do.Universe.Linux.GNOMESpecialLocationsItemSource+<ReadBookmarkItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at Do.Universe.Linux.GNOMESpecialLocationsItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . It stops when I try my key combination, ctrl-alt-. It does not pop up though.

    Read the article

  • Movement prediction for non-shooters

    - by ShadowChaser
    I'm working on an isometric 2D game with moderate-scale multiplayer, approximately 20-30 players connected at once to a persistent server. I've had some difficulty getting a good movement prediction implementation in place. Physics/Movement The game doesn't have a true physics implementation, but uses the basic principles to implement movement. Rather than continually polling input, state changes (ie/ mouse down/up/move events) are used to change the state of the character entity the player is controlling. The player's direction (ie/ north-east) is combined with a constant speed and turned into a true 3D vector - the entity's velocity. In the main game loop, "Update" is called before "Draw". The update logic triggers a "physics update task" that tracks all entities with a non-zero velocity uses very basic integration to change the entities position. For example: entity.Position += entity.Velocity.Scale(ElapsedTime.Seconds) (where "Seconds" is a floating point value, but the same approach would work for millisecond integer values). The key point is that no interpolation is used for movement - the rudimentary physics engine has no concept of a "previous state" or "current state", only a position and velocity. State Change and Update Packets When the velocity of the character entity the player is controlling changes, a "move avatar" packet is sent to the server containing the entity's action type (stand, walk, run), direction (north-east), and current position. This is different from how 3D first person games work. In a 3D game the velocity (direction) can change frame to frame as the player moves around. Sending every state change would effectively transmit a packet per frame, which would be too expensive. Instead, 3D games seem to ignore state changes and send "state update" packets on a fixed interval - say, every 80-150ms. Since speed and direction updates occur much less frequently in my game, I can get away with sending every state change. Although all of the physics simulations occur at the same speed and are deterministic, latency is still an issue. For that reason, I send out routine position update packets (similar to a 3D game) but much less frequently - right now every 250ms, but I suspect with good prediction I can easily boost it towards 500ms. The biggest problem is that I've now deviated from the norm - all other documentation, guides, and samples online send routine updates and interpolate between the two states. It seems incompatible with my architecture, and I need to come up with a better movement prediction algorithm that is closer to a (very basic) "networked physics" architecture. The server then receives the packet and determines the players speed from it's movement type based on a script (Is the player able to run? Get the player's running speed). Once it has the speed, it combines it with the direction to get a vector - the entity's velocity. Some cheat detection and basic validation occurs, and the entity on the server side is updated with the current velocity, direction, and position. Basic throttling is also performed to prevent players from flooding the server with movement requests. After updating its own entity, the server broadcasts an "avatar position update" packet to all other players within range. The position update packet is used to update the client side physics simulations (world state) of the remote clients and perform prediction and lag compensation. Prediction and Lag Compensation As mentioned above, clients are authoritative for their own position. Except in cases of cheating or anomalies, the client's avatar will never be repositioned by the server. No extrapolation ("move now and correct later") is required for the client's avatar - what the player sees is correct. However, some sort of extrapolation or interpolation is required for all remote entities that are moving. Some sort of prediction and/or lag-compensation is clearly required within the client's local simulation / physics engine. Problems I've been struggling with various algorithms, and have a number of questions and problems: Should I be extrapolating, interpolating, or both? My "gut feeling" is that I should be using pure extrapolation based on velocity. State change is received by the client, client computes a "predicted" velocity that compensates for lag, and the regular physics system does the rest. However, it feels at odds to all other sample code and articles - they all seem to store a number of states and perform interpolation without a physics engine. When a packet arrives, I've tried interpolating the packet's position with the packet's velocity over a fixed time period (say, 200ms). I then take the difference between the interpolated position and the current "error" position to compute a new vector and place that on the entity instead of the velocity that was sent. However, the assumption is that another packet will arrive in that time interval, and it's incredibly difficult to "guess" when the next packet will arrive - especially since they don't all arrive on fixed intervals (ie/ state changes as well). Is the concept fundamentally flawed, or is it correct but needs some fixes / adjustments? What happens when a remote player stops? I can immediately stop the entity, but it will be positioned in the "wrong" spot until it moves again. If I estimate a vector or try to interpolate, I have an issue because I don't store the previous state - the physics engine has no way to say "you need to stop after you reach position X". It simply understands a velocity, nothing more complex. I'm reluctant to add the "packet movement state" information to the entities or physics engine, since it violates basic design principles and bleeds network code across the rest of the game engine. What should happen when entities collide? There are three scenarios - the controlling player collides locally, two entities collide on the server during a position update, or a remote entity update collides on the local client. In all cases I'm uncertain how to handle the collision - aside from cheating, both states are "correct" but at different time periods. In the case of a remote entity it doesn't make sense to draw it walking through a wall, so I perform collision detection on the local client and cause it to "stop". Based on point #2 above, I might compute a "corrected vector" that continually tries to move the entity "through the wall" which will never succeed - the remote avatar is stuck there until the error gets too high and it "snaps" into position. How do games work around this?

    Read the article

  • SQL SERVER – Weekly Series – Memory Lane – #050

    - by Pinal Dave
    Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Executing Remote Stored Procedure – Calling Stored Procedure on Linked Server In this example we see two different methods of how to call Stored Procedures remotely.  Connection Property of SQL Server Management Studio SSMS A very simple example of the how to build connection properties for SQL Server with the help of SSMS. Sample Example of RANKING Functions – ROW_NUMBER, RANK, DENSE_RANK, NTILE SQL Server has a total of 4 ranking functions. Ranking functions return a ranking value for each row in a partition. All the ranking functions are non-deterministic. T-SQL Script to Add Clustered Primary Key Jr. DBA asked me three times in a day, how to create Clustered Primary Key. I gave him following sample example. That was the last time he asked “How to create Clustered Primary Key to table?” 2008 2008 – TRIM() Function – User Defined Function SQL Server does not have functions which can trim leading or trailing spaces of any string at the same time. SQL does have LTRIM() and RTRIM() which can trim leading and trailing spaces respectively. SQL Server 2008 also does not have TRIM() function. User can easily use LTRIM() and RTRIM() together and simulate TRIM() functionality. http://www.youtube.com/watch?v=1-hhApy6MHM 2009 Earlier I have written two different articles on the subject Remove Bookmark Lookup. This article is as part 3 of original article. Please read the first two articles here before continuing reading this article. Query Optimization – Remove Bookmark Lookup – Remove RID Lookup – Remove Key Lookup Query Optimization – Remove Bookmark Lookup – Remove RID Lookup – Remove Key Lookup – Part 2 Query Optimization – Remove Bookmark Lookup – Remove RID Lookup – Remove Key Lookup – Part 3 Interesting Observation – Query Hint – FORCE ORDER SQL Server never stops to amaze me. As regular readers of this blog already know that besides conducting corporate training, I work on large-scale projects on query optimizations and server tuning projects. In one of the recent projects, I have noticed that a Junior Database Developer used the query hint Force Order; when I asked for details, I found out that the basic concept was not properly understood by him. Queries Waiting for Memory Allocation to Execute In one of the recent projects, I was asked to create a report of queries that are waiting for memory allocation. The reason was that we were doubtful regarding whether the memory was sufficient for the application. The following query can be useful in similar cases. Queries that do not have to wait on a memory grant will not appear in the result set of following query. 2010 Quickest Way to Identify Blocking Query and Resolution – Dirty Solution As the title suggests, this is quite a dirty solution; it’s not as elegant as you expect. However, it works totally fine. Simple Explanation of Data Type Precedence While I was working on creating a question for SQL SERVER – SQL Quiz – The View, The Table and The Clustered Index Confusion, I had actually created yet another question along with this question. However, I felt that the one which is posted on the SQL Quiz is much better than this one because what makes that more challenging question is that it has a multiple answer. Encrypted Stored Procedure and Activity Monitor I recently had received questionable if any stored procedure is encrypted can we see its definition in Activity Monitor.Answer is - No. Let us do a quick test. Let us create following Stored Procedure and then launch the Activity Monitor and check the text. Indexed View always Use Index on Table A single table can have maximum 249 non clustered indexes and 1 clustered index. In SQL Server 2008, a single table can have maximum 999 non clustered indexes and 1 clustered index. It is widely believed that a table can have only 1 clustered index, and this belief is true. I have some questions for all of you. Let us assume that I am creating view from the table itself and then create a clustered index on it. In my view, I am selecting the complete table itself. 2011 Detecting Database Case Sensitive Property using fn_helpcollations() I received a question on how to determine the case sensitivity of the database. The quick answer to this is to identify the collation of the database and check the properties of the collation. I have previously written how one can identify database collation. Once you have figured out the collation of the database, you can put that in the WHERE condition of the following T-SQL and then check the case sensitivity from the description. Server Side Paging in SQL Server CE (Compact Edition) SQL Server Denali is coming up with new T-SQL of Paging. I have written about the same earlier.SQL SERVER – Server Side Paging in SQL Server Denali – A Better Alternative,  SQL SERVER – Server Side Paging in SQL Server Denali Performance Comparison, SQL SERVER – Server Side Paging in SQL Server Denali – Part2 What is very interesting is that SQL Server CE 4.0 have the same feature introduced. Here is the quick example of the same. To run the script in the example, you will have to do installWebmatrix 4.0 and download sample database. Once done you can run following script. Why I am Going to Attend PASS Summit Unite 2011 The four-day event will be marked by a lot of learning, sharing, and networking, which will help me increase both my knowledge and contacts. Every year, PASS Summit provides me a golden opportunity to build my network as well as to identify and meet potential customers or employees. 2012 Manage Help Settings – CTRL + ALT + F1 This is very interesting read as my daughter once accidently came across a screen in SQL Server Management Studio. It took me 2-3 minutes to figure out how she has created the same screen. Recover the Accidentally Renamed Table “I accidentally renamed table in my SSMS. I was scrolling very fast and I made mistakes. It was either because I double clicked or clicked on F2 (shortcut key for renaming). However, I have made the mistake and now I have no idea how to fix this. If you have renamed the table, I think you pretty much is out of luck. Here are few things which you can do which can give you an idea about what your table name can be if you are lucky. Identify Numbers of Non Clustered Index on Tables for Entire Database Here is the script which will give you numbers of non clustered indexes on any table in entire database. Identify Most Resource Intensive Queries – SQL in Sixty Seconds #029 – Video Here is the complete complete script which I have used in the SQL in Sixty Seconds Video. Thanks Harsh for important Tip in the comment. http://www.youtube.com/watch?v=3kDHC_Tjrns Advanced Data Quality Services with Melissa Data – Azure Data Market For the purposes of the review, I used a database I had in an Excel spreadsheet with name and address information. Upon a cursory inspection, there are miscellaneous problems with these records; some addresses are missing ZIP codes, others missing a city, and some records are slightly misspelled or have unparsed suites. With DQS, I can easily add a knowledge base to help standardize my values, such as for state abbreviations. But how do I know that my address is correct? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Sliding collision response

    - by dbostream
    I have been reading plenty of tutorials about sliding collision responses yet I am not able to implement it properly in my project. What I want to do is make a puck slide along the rounded corner boards of a hockey rink. In my latest attempt the puck does slide along the boards but there are some strange velocity behaviors. First of all the puck slows down a lot pretty much right away and then it slides for awhile and stops before exiting the corner. Even if I double the speed I get a similar behavior and the puck does not make it out of the corner. I used some ideas from this document http://www.peroxide.dk/papers/collision/collision.pdf. This is what I have: Update method called from the game loop when it is time to update the puck (I removed some irrelevant parts). I use two states (current, previous) which are used to interpolate the position during rendering. public override void Update(double fixedTimeStep) { /* Acceleration is set to 0 for now. */ Acceleration.Zero(); PreviousState = CurrentState; _collisionRecursionDepth = 0; CurrentState.Position = SlidingCollision(CurrentState.Position, CurrentState.Velocity * fixedTimeStep + 0.5 * Acceleration * fixedTimeStep * fixedTimeStep); /* Should not this be affected by a sliding collision? and not only the position. */ CurrentState.Velocity = CurrentState.Velocity + Acceleration * fixedTimeStep; Heading = Vector2.NormalizeRet(CurrentState.Velocity); } private Vector2 SlidingCollision(Vector2 position, Vector2 velocity) { if(_collisionRecursionDepth > 5) return position; bool collisionFound = false; Vector2 futurePosition = position + velocity; Vector2 intersectionPoint = new Vector2(); Vector2 intersectionPointNormal = new Vector2(); /* I did not include the collision detection code, if a collision is detected the intersection point and normal in that point is returned. */ if(!collisionFound) return futurePosition; /* If no collision was detected it is safe to move to the future position. */ /* It is not exactly the intersection point, but slightly before. */ Vector2 newPosition = intersectionPoint; /* oldVelocity is set to the distance from the newPosition(intersection point) to the position it had moved to had it not collided. */ Vector2 oldVelocity = futurePosition - newPosition; /* Project the distance left to move along the intersection normal. */ Vector2 newVelocity = oldVelocity - intersectionPointNormal * oldVelocity.DotProduct(intersectionPointNormal); if(newVelocity.LengthSq() < 0.001) return newPosition; /* If almost no speed, no need to continue. */ _collisionRecursionDepth++; return SlidingCollision(newPosition, newVelocity); } What am I doing wrong with the velocity? I have been staring at this for very long so I have gone blind. I have tried different values of recursion depth but it does not seem to make it better. Let me know if you need more information. I appreciate any help. EDIT: A combination of Patrick Hughes' and teodron's answers solved the velocity problem (I think), thanks a lot! This is the new code: I decided to use a separate recursion method now too since I don't want to recalculate the acceleration in each recursion. public override void Update(double fixedTimeStep) { Acceleration.Zero();// = CalculateAcceleration(fixedTimeStep); PreviousState = new MovingEntityState(CurrentState.Position, CurrentState.Velocity); CurrentState = SlidingCollision(CurrentState, fixedTimeStep); Heading = Vector2.NormalizeRet(CurrentState.Velocity); } private MovingEntityState SlidingCollision(MovingEntityState state, double timeStep) { bool collisionFound = false; /* Calculate the next position given no detected collision. */ Vector2 futurePosition = state.Position + state.Velocity * timeStep; Vector2 intersectionPoint = new Vector2(); Vector2 intersectionPointNormal = new Vector2(); /* I did not include the collision detection code, if a collision is detected the intersection point and normal in that point is returned. */ /* If no collision was detected it is safe to move to the future position. */ if (!collisionFound) return new MovingEntityState(futurePosition, state.Velocity); /* Set new position to the intersection point (slightly before). */ Vector2 newPosition = intersectionPoint; /* Project the new velocity along the intersection normal. */ Vector2 newVelocity = state.Velocity - 1.90 * intersectionPointNormal * state.Velocity.DotProduct(intersectionPointNormal); /* Calculate the time of collision. */ double timeOfCollision = Math.Sqrt((newPosition - state.Position).LengthSq() / (futurePosition - state.Position).LengthSq()); /* Calculate new time step, remaining time of full step after the collision * current time step. */ double newTimeStep = timeStep * (1 - timeOfCollision); return SlidingCollision(new MovingEntityState(newPosition, newVelocity), newTimeStep); } Even though the code above seems to slide the puck correctly please have a look at it. I have a few questions, if I don't multiply by 1.90 in the newVelocity calculation it doesn't work (I get a stack overflow when the puck enters the corner because the timeStep decreases very slowly - a collision is found early in every recursion), why is that? what does 1.90 really do and why 1.90? Also I have a new problem, the puck does not move parallell to the short side after exiting the curve; to be more exact it moves outside the rink (I am not checking for any collisions with the short side at the moment). When I perform the collision detection I first check that the puck is in the correct quadrant. For example bottom-right corner is quadrant four i.e. circleCenter.X < puck.X && circleCenter.Y puck.Y is this a problem? or should the short side of the rink be the one to make the puck go parallell to it and not the last collision in the corner? EDIT2: This is the code I use for collision detection, maybe it has something to do with the fact that I can't make the puck slide (-1.0) but only reflect (-2.0): /* Point is the current position (not the predicted one) and quadrant is 4 for the bottom-right corner for example. */ if (GeometryHelper.PointInCircleQuadrant(circleCenter, circleRadius, state.Position, quadrant)) { /* The line is: from = state.Position, to = futurePosition. So a collision is detected when from is inside the circle and to is outside. */ if (GeometryHelper.LineCircleIntersection2d(state.Position, futurePosition, circleCenter, circleRadius, intersectionPoint, quadrant)) { collisionFound = true; /* Set the intersection point to slightly before the real intersection point (I read somewhere this was good to do because of floting point precision, not sure exactly how much though). */ intersectionPoint = intersectionPoint - Vector2.NormalizeRet(state.Velocity) * 0.001; /* Normal at the intersection point. */ intersectionPointNormal = Vector2.NormalizeRet(circleCenter - intersectionPoint) } } When I set the intersection point, if I for example use 0.1 instead of 0.001 the puck travels further before it gets stuck, but for all values I have tried (including 0 - the real intersection point) it gets stuck somewhere (but I necessarily not get a stack overflow). Can something in this part be the cause of my problem? I can see why I get the stack overflow when using -1.0 when calculating the new velocity vector; but not how to solve it. I traced the time steps used in the recursion (initial time step is always 1/60 ~ 0.01666): Recursion depth Time step next recursive call [Start recursion, time step ~ 0.016666] 0 0,000985806527246773 [No collision, stop recursion] [Start recursion, time step ~ 0.016666] 0 0,0149596704364629 1 0,0144883449376379 2 0,0143155612984837 3 0,014224925727213 4 0,0141673917461608 5 0,0141265435314026 6 0,0140953966184117 7 0,0140704653746625 ...and so on. As you can see the collision is detected early in every recursive call which means the next time step decreases very slowly thus the recursion depth gets very big - stack overflow.

    Read the article

  • xml file save/read error (making a highscore system for XNA game)

    - by Eddy
    i get an error after i write player name to the file for second or third time (An unhandled exception of type 'System.InvalidOperationException' occurred in System.Xml.dll Additional information: There is an error in XML document (18, 17).) (in highscores load method In data = (HighScoreData)serializer.Deserialize(stream); it stops) the problem is that some how it adds additional "" at the end of my .dat file could anyone tell me how to fix this? the file before save looks: <?xml version="1.0"?> <HighScoreData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <PlayerName> <string>neil</string> <string>shawn</string> <string>mark</string> <string>cindy</string> <string>sam</string> </PlayerName> <Score> <int>200</int> <int>180</int> <int>150</int> <int>100</int> <int>50</int> </Score> <Count>5</Count> </HighScoreData> the file after save looks: <?xml version="1.0"?> <HighScoreData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <PlayerName> <string>Nick</string> <string>Nick</string> <string>neil</string> <string>shawn</string> <string>mark</string> </PlayerName> <Score> <int>210</int> <int>210</int> <int>200</int> <int>180</int> <int>150</int> </Score> <Count>5</Count> </HighScoreData>> the part of my code that does all of save load to xml is: DECLARATIONS PART [Serializable] public struct HighScoreData { public string[] PlayerName; public int[] Score; public int Count; public HighScoreData(int count) { PlayerName = new string[count]; Score = new int[count]; Count = count; } } IAsyncResult result = null; bool inputName; HighScoreData data; int Score = 0; public string NAME; public string HighScoresFilename = "highscores.dat"; Game1 constructor public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; Width = graphics.PreferredBackBufferWidth = 960; Height = graphics.PreferredBackBufferHeight =640; GamerServicesComponent GSC = new GamerServicesComponent(this); Components.Add(GSC); } Inicialize function (end of it) protected override void Initialize() { //other game code base.Initialize(); string fullpath =Path.Combine(HighScoresFilename); if (!File.Exists(fullpath)) { //If the file doesn't exist, make a fake one... // Create the data to save data = new HighScoreData(5); data.PlayerName[0] = "neil"; data.Score[0] = 200; data.PlayerName[1] = "shawn"; data.Score[1] = 180; data.PlayerName[2] = "mark"; data.Score[2] = 150; data.PlayerName[3] = "cindy"; data.Score[3] = 100; data.PlayerName[4] = "sam"; data.Score[4] = 50; SaveHighScores(data, HighScoresFilename); } } all methods for loading saving and output public static void SaveHighScores(HighScoreData data, string filename) { // Get the path of the save game string fullpath = Path.Combine("highscores.dat"); // Open the file, creating it if necessary FileStream stream = File.Open(fullpath, FileMode.OpenOrCreate); try { // Convert the object to XML data and put it in the stream XmlSerializer serializer = new XmlSerializer(typeof(HighScoreData)); serializer.Serialize(stream, data); } finally { // Close the file stream.Close(); } } /* Load highscores */ public static HighScoreData LoadHighScores(string filename) { HighScoreData data; // Get the path of the save game string fullpath = Path.Combine("highscores.dat"); // Open the file FileStream stream = File.Open(fullpath, FileMode.OpenOrCreate, FileAccess.Read); try { // Read the data from the file XmlSerializer serializer = new XmlSerializer(typeof(HighScoreData)); data = (HighScoreData)serializer.Deserialize(stream);//this is the line // where program gives an error } finally { // Close the file stream.Close(); } return (data); } /* Save player highscore when game ends */ private void SaveHighScore() { // Create the data to saved HighScoreData data = LoadHighScores(HighScoresFilename); int scoreIndex = -1; for (int i = 0; i < data.Count ; i++) { if (Score > data.Score[i]) { scoreIndex = i; break; } } if (scoreIndex > -1) { //New high score found ... do swaps for (int i = data.Count - 1; i > scoreIndex; i--) { data.PlayerName[i] = data.PlayerName[i - 1]; data.Score[i] = data.Score[i - 1]; } data.PlayerName[scoreIndex] = NAME; //Retrieve User Name Here data.Score[scoreIndex] = Score; // Retrieve score here SaveHighScores(data, HighScoresFilename); } } /* Iterate through data if highscore is called and make the string to be saved*/ public string makeHighScoreString() { // Create the data to save HighScoreData data2 = LoadHighScores(HighScoresFilename); // Create scoreBoardString string scoreBoardString = "Highscores:\n\n"; for (int i = 0; i<5;i++) { scoreBoardString = scoreBoardString + data2.PlayerName[i] + "-" + data2.Score[i] + "\n"; } return scoreBoardString; } when ill make this work i will start this code when i call game over (now i start it when i press some buttons, so i could test it faster) public void InputYourName() { if (result == null && !Guide.IsVisible) { string title = "Name"; string description = "Write your name in order to save your Score"; string defaultText = "Nick"; PlayerIndex playerIndex = new PlayerIndex(); result= Guide.BeginShowKeyboardInput(playerIndex, title, description, defaultText, null, null); // NAME = result.ToString(); } if (result != null && result.IsCompleted) { NAME = Guide.EndShowKeyboardInput(result); result = null; inputName = false; SaveHighScore(); } } this where i call output to the screen (ill call this in highscores meniu section when i am done with debugging) spriteBatch.DrawString(Font1, "" + makeHighScoreString(),new Vector2(500,200), Color.White); }

    Read the article

  • Elegance, thy Name is jQuery

    - by SGWellens
    So, I'm browsing though some questions over on the Stack Overflow website and I found a good jQuery question just a few minutes old. Here is a link to it. It was a tough question; I knew that by answering it, I could learn new stuff and reinforce what I already knew: Reading is good, doing is better. Maybe I could help someone in the process too. I cut and pasted the HTML from the question into my Visual Studio IDE and went back to Stack Overflow to reread the question. Dang, someone had already answered it! And it was a great answer. I never even had a chance to start analyzing the issue. Now I know what a one-legged man feels like in an ass-kicking contest. Nevertheless, since the question and answer were so interesting, I decided to dissect them and learn as much as possible. The HTML consisted of some divs separated by h3 headings.  Note the elements are laid out sequentially with no programmatic grouping: <h3 class="heading">Heading 1</h3> <div>Content</div> <div>More content</div> <div>Even more content</div><h3 class="heading">Heading 2</h3> <div>some content</div> <div>some more content</div><h3 class="heading">Heading 3</h3> <div>other content</div></form></body>  The requirement was to wrap a div around each h3 heading and the subsequent divs grouping them into sections. Why? I don't know, I suppose if you screen-scrapped some HTML from another site, you might want to reformat it before displaying it on your own. Anyways… Here is the marvelously, succinct posted answer: $('.heading').each(function(){ $(this).nextUntil('.heading').andSelf().wrapAll('<div class="section">');}); I was familiar with all the parts except for nextUntil and andSelf. But, I'll analyze the whole answer for completeness. I'll do this by rewriting the posted answer in a different style and adding a boat-load of comments: function Test(){ // $Sections is a jQuery object and it will contain three elements var $Sections = $('.heading'); // use each to iterate over each of the three elements $Sections.each(function () { // $this is a jquery object containing the current element // being iterated var $this = $(this); // nextUntil gets the following sibling elements until it reaches // an element with the CSS class 'heading' // andSelf adds in the source element (this) to the collection $this = $this.nextUntil('.heading').andSelf(); // wrap the elements with a div $this.wrapAll('<div class="section" >'); });}  The code here doesn't look nearly as concise and elegant as the original answer. However, unless you and your staff are jQuery masters, during development it really helps to work through algorithms step by step. You can step through this code in the debugger and examine the jQuery objects to make sure one step is working before proceeding on to the next. It's much easier to debug and troubleshoot when each logical coding step is a separate line of code. Note: You may think the original code runs much faster than this version. However, the time difference is trivial: Not enough to worry about: Less than 1 millisecond (tested in IE and FF). Note: You may want to jam everything into one line because it results in less traffic being sent to the client. That is true. However, most Internet servers now compress HTML and JavaScript by stripping out comments and white space (go to Bing or Google and view the source). This feature should be enabled on your server: Let the server compress your code, you don't need to do it. Free Career Advice: Creating maintainable code is Job One—Maximum Priority—The Prime Directive. If you find yourself suddenly transferred to customer support, it may be that the code you are writing is not as readable as it could be and not as readable as it should be. Moving on… I created a CSS class to enhance the results: .section{ background-color: yellow; border: 2px solid black; margin: 5px;} Here is the rendered output before:   …and after the jQuery code runs.   Pretty Cool! But, while playing with this code, the logic of nextUntil began to bother me: What happens in the last section? What stops elements from being collected since there are no more elements with the .heading class? The answer is nothing.  In this case it stopped collecting elements because it was at the end of the page.  But what if there were additional HTML elements? I added an anchor tag and another div to the HTML: <h3 class="heading">Heading 1</h3> <div>Content</div> <div>More content</div> <div>Even more content</div><h3 class="heading">Heading 2</h3> <div>some content</div> <div>some more content</div><h3 class="heading">Heading 3</h3> <div>other content</div><a>this is a link</a><div>unrelated div</div> </form></body> The code as-is will include both the anchor and the unrelated div. This isn't what we want.   My first attempt to correct this used the filter parameter of the nextUntil function: nextUntil('.heading', 'div')  This will only collect div elements. But it merely skipped the anchor tag and it still collected the unrelated div:   The problem is we need a way to tell the nextUntil function when to stop. CSS selectors to the rescue! nextUntil('.heading, a')  This tells nextUntil to stop collecting elements when it gets to an element with a .heading class OR when it gets to an anchor tag. In this case it solved the problem. FYI: The comma operator in a CSS selector allows multiple criteria.   Bingo! One final note, we could have broken the code down even more: We could have replaced the andSelf function here: $this = $this.nextUntil('.heading, a').andSelf(); With this: // get all the following siblings and then add the current item$this = $this.nextUntil('.heading, a');$this.add(this);  But in this case, the andSelf function reads real nice. In my opinion. Here's a link to a jsFiddle if you want to play with it. I hope someone finds this useful Steve Wellens CodeProject

    Read the article

  • Refactoring a Single Rails Model with large methods & long join queries trying to do everything

    - by Kelseydh
    I have a working Ruby on Rails Model that I suspect is inefficient, hard to maintain, and full of unnecessary SQL join queries. I want to optimize and refactor this Model (Quiz.rb) to comply with Rails best practices, but I'm not sure how I should do it. The Rails app is a game that has Missions with many Stages. Users complete Stages by answering Questions that have correct or incorrect Answers. When a User tries to complete a stage by answering questions, the User gets a Quiz entry with many Attempts. Each Attempt records an Answer submitted for that Question within the Stage. A user completes a stage or mission by getting every Attempt correct, and their progress is tracked by adding a new entry to the UserMission & UserStage join tables. All of these features work, but unfortunately the Quiz.rb Model has been twisted to handle almost all of it exclusively. The callbacks began at 'Quiz.rb', and because I wasn't sure how to leave the Quiz Model during a multi-model update, I resorted to using Rails Console to have the @quiz instance variable via self.some_method do all the heavy lifting to retrieve every data value for the game's business logic; resulting in large extended join queries that "dance" all around the Database schema. The Quiz.rb Model that Smells: class Quiz < ActiveRecord::Base belongs_to :user has_many :attempts, dependent: :destroy before_save :check_answer before_save :update_user_mission_and_stage accepts_nested_attributes_for :attempts, :reject_if => lambda { |a| a[:answer_id].blank? }, :allow_destroy => true #Checks every answer within each quiz, adding +1 for each correct answer #within a stage quiz, and -1 for each incorrect answer def check_answer stage_score = 0 self.attempts.each do |attempt| if attempt.answer.correct? == true stage_score += 1 elsif attempt.answer.correct == false stage_score - 1 end end stage_score end def winner return true end def update_user_mission_and_stage ####### #Step 1: Checks if UserMission exists, finds or creates one. #if no UserMission for the current mission exists, creates a new UserMission if self.user_has_mission? == false @user_mission = UserMission.new(user_id: self.user.id, mission_id: self.current_stage.mission_id, available: true) @user_mission.save else @user_mission = self.find_user_mission end ####### #Step 2: Checks if current UserStage exists, stops if true to prevent duplicate entry if self.user_has_stage? @user_mission.save return true else ####### ##Step 3: if step 2 returns false: ##Initiates UserStage creation instructions #checks for winner (winner actions need to be defined) if they complete last stage of last mission for a given orientation if self.passed? && self.is_last_stage? && self.is_last_mission? create_user_stage_and_update_user_mission self.winner #NOTE: The rest are the same, but specify conditions that are available to add badges or other actions upon those conditions occurring: ##if user completes first stage of a mission elsif self.passed? && self.is_first_stage? && self.is_first_mission? create_user_stage_and_update_user_mission #creates user badge for finishing first stage of first mission self.user.add_badge(5) self.user.activity_logs.create(description: "granted first-stage badge", type_event: "badge", value: "first-stage") #If user completes last stage of a given mission, creates a new UserMission elsif self.passed? && self.is_last_stage? && self.is_first_mission? create_user_stage_and_update_user_mission #creates user badge for finishing first mission self.user.add_badge(6) self.user.activity_logs.create(description: "granted first-mission badge", type_event: "badge", value: "first-mission") elsif self.passed? create_user_stage_and_update_user_mission else self.passed? == false return true end end end #Creates a new UserStage record in the database for a successful Quiz question passing def create_user_stage_and_update_user_mission @nu_stage = @user_mission.user_stages.new(user_id: self.user.id, stage_id: self.current_stage.id) @nu_stage.save @user_mission.save self.user.add_points(50) end #Boolean that defines passing a stage as answering every question in that stage correct def passed? self.check_answer >= self.number_of_questions end #Returns the number of questions asked for that stage's quiz def number_of_questions self.attempts.first.answer.question.stage.questions.count end #Returns the current_stage for the Quiz, routing through 1st attempt in that Quiz def current_stage self.attempts.first.answer.question.stage end #Gives back the position of the stage relative to its mission. def stage_position self.attempts.first.answer.question.stage.position end #will find the user_mission for the current user and stage if it exists def find_user_mission self.user.user_missions.find_by_mission_id(self.current_stage.mission_id) end #Returns true if quiz was for the last stage within that mission #helpful for triggering actions related to a user completing a mission def is_last_stage? self.stage_position == self.current_stage.mission.stages.last.position end #Returns true if quiz was for the first stage within that mission #helpful for triggering actions related to a user completing a mission def is_first_stage? self.stage_position == self.current_stage.mission.stages_ordered.first.position end #Returns true if current user has a UserMission for the current stage def user_has_mission? self.user.missions.ids.include?(self.current_stage.mission.id) end #Returns true if current user has a UserStage for the current stage def user_has_stage? self.user.stages.include?(self.current_stage) end #Returns true if current user is on the last mission based on position within a given orientation def is_first_mission? self.user.missions.first.orientation.missions.by_position.first.position == self.current_stage.mission.position end #Returns true if current user is on the first stage & mission of a given orientation def is_last_mission? self.user.missions.first.orientation.missions.by_position.last.position == self.current_stage.mission.position end end My Question Currently my Rails server takes roughly 500ms to 1 sec to process single @quiz.save action. I am confident that the slowness here is due to sloppy code, not bad Database ERD design. What does a better solution look like? And specifically: Should I use join queries to retrieve values like I did here, or is it better to instantiate new objects within the model instead? Or am I missing a better solution? How should update_user_mission_and_stage be refactored to follow best practices? Relevant Code for Reference: quizzes_controller.rb w/ Controller Route Initiating Callback: class QuizzesController < ApplicationController before_action :find_stage_and_mission before_action :find_orientation before_action :find_question def show end def create @user = current_user @quiz = current_user.quizzes.new(quiz_params) if @quiz.save if @quiz.passed? if @mission.next_mission.nil? && @stage.next_stage.nil? redirect_to root_path, notice: "Congratulations, you have finished the last mission!" elsif @stage.next_stage.nil? redirect_to [@mission.next_mission, @mission.first_stage], notice: "Correct! Time for Mission #{@mission.next_mission.position}", info: "Starting next mission" else redirect_to [@mission, @stage.next_stage], notice: "Answer Correct! You passed the stage!" end else redirect_to [@mission, @stage], alert: "You didn't get every question right, please try again." end else redirect_to [@mission, @stage], alert: "Sorry. We were unable to save your answer. Please contact the admministrator." end @questions = @stage.questions.all end private def find_stage_and_mission @stage = Stage.find(params[:stage_id]) @mission = @stage.mission end def find_question @question = @stage.questions.find_by_id params[:id] end def quiz_params params.require(:quiz).permit(:user_id, :attempt_id, {attempts_attributes: [:id, :quiz_id, :answer_id]}) end def find_orientation @orientation = @mission.orientation @missions = @orientation.missions.by_position end end Overview of Relevant ERD Database Relationships: Mission - Stage - Question - Answer - Attempt <- Quiz <- User Mission - UserMission <- User Stage - UserStage <- User Other Models: Mission.rb class Mission < ActiveRecord::Base belongs_to :orientation has_many :stages has_many :user_missions, dependent: :destroy has_many :users, through: :user_missions #SCOPES scope :by_position, -> {order(position: :asc)} def stages_ordered stages.order(:position) end def next_mission self.orientation.missions.find_by_position(self.position.next) end def first_stage next_mission.stages_ordered.first end end Stage.rb: class Stage < ActiveRecord::Base belongs_to :mission has_many :questions, dependent: :destroy has_many :user_stages, dependent: :destroy has_many :users, through: :user_stages accepts_nested_attributes_for :questions, reject_if: :all_blank, allow_destroy: true def next_stage self.mission.stages.find_by_position(self.position.next) end end Question.rb class Question < ActiveRecord::Base belongs_to :stage has_many :answers, dependent: :destroy accepts_nested_attributes_for :answers, :reject_if => lambda { |a| a[:body].blank? }, :allow_destroy => true end Answer.rb: class Answer < ActiveRecord::Base belongs_to :question has_many :attempts, dependent: :destroy end Attempt.rb: class Attempt < ActiveRecord::Base belongs_to :answer belongs_to :quiz end User.rb: class User < ActiveRecord::Base belongs_to :school has_many :activity_logs has_many :user_missions, dependent: :destroy has_many :missions, through: :user_missions has_many :user_stages, dependent: :destroy has_many :stages, through: :user_stages has_many :orientations, through: :school has_many :quizzes, dependent: :destroy has_many :attempts, through: :quizzes def latest_stage_position self.user_missions.last.user_stages.last.stage.position end end UserMission.rb class UserMission < ActiveRecord::Base belongs_to :user belongs_to :mission has_many :user_stages, dependent: :destroy end UserStage.rb class UserStage < ActiveRecord::Base belongs_to :user belongs_to :stage belongs_to :user_mission end

    Read the article

  • Personal Technology – Laptop Screen Blank – No Post – No BIOS – No Boot

    - by Pinal Dave
    If your laptop Screen is Blank and there is no POST, BIOS or boot, you can follow the steps mentioned here and there are chances that it will work if there is no hardware failure inside. Step 1: Remove the power cord from the laptop Step 2: Remove the battery from the laptop Step 3: Hold power button (keep it pressed) for almost 60 seconds Step 4: Plug power back in laptop Step 5: Start computer and it should just start normally. Step 6: Now shut down Step 7: Insert the battery back in the laptop Step 8: Start laptop again and it should work Note 1: If your laptop does not work after inserting back the memory. Remove the memory and repeat above process. Do not insert the battery back as it is malfunctioning. Note 2: If your screen is faulty or have issues with your hardware (motherboard, screen or anything else) this method will not fix your computer. Those, who care about how I come up with this not SQL related blog post, here is the very funny true story. If you are a married man, you will know what I am going to describe next. May be you have faced the same situation or at least you feel and understand my situation. My wife’s computer suddenly stops working when she was searching for my daughter’s mathematics worksheets online. While the fatal accident happened with my wife’s computer (which was my loyal computer for over 4 years before she got it), I was working in my home office, fixing a high priority issue (live order’s database was corrupted) with one of the largest eCommerce websites.  While I was working on production server where I was fixing database corruption, my wife ran to my home office. Here is how the conversation went: Wife: This computer does not work. I: Restart it. Wife: It does not start. I: What did you do with it? Wife: Nothing, it just stopped working. I: Okey, I will look into it later, working on the very urgent issue. Wife: I was printing my daughter’s worksheet. I: Hm.. Okey. Wife: It was the mathematics worksheet, which you promised you will teach but you never get around to do it, so I am doing it myself. I: Thanks. I appreciate it. I am very busy with this issue as million dollar transaction are not happening as the database got corrupted and … Wife: So what … umm… You mean to say that you care about this customer more than your daughter. You know she got A+ in every other class but in mathematics she got only A. She missed that extra credit question. I: She is only 4, it is okay. Wife: She is 4.5 years old not 4. So you are not going to fix this computer which does not start at all. I think our daughter next time will even get lower grades as her dad is busy fixing something. I: Alright, I give up bring me that computer. Our daughter who was listening everything so far she finally decided to speak up. Daughter: Dad, it is a laptop not computer. I: Yes, sweety get that laptop here and your dad is going to fix the this small issue of million dollar issue later on. I decided to pay attention to my wife’s computer. She was right. No matter what I do, it will not boot up, it will not start, no BIOS, no POST screen. The computer starts for a second but nothing comes up on the screen. The light indicating hard drive comes up for a second and goes off. Nothing happens. I removed every single USB drive from the laptop but it still would not start. It was indeed no fun for me. Finally I remember my days when I was not married and used to study in University of Southern California, Los Angeles. I remembered that I used to have very old second (or maybe third or fourth) hand computer with me. In polite words, I had pre-owned computer and it used to face very similar issues again and again. I had small routine I used to follow to fix my old computer and I had decided to follow the same steps again with this computer. Step 1: Remove the power cord from the laptop Step 2: Remove the battery from the laptop Step 3: Hold power button (keep it pressed) for almost 60 seconds Step 4: Plug power back in laptop Step 5: Start computer and it should just start normally. Step 6: Now shut down Step 7: Insert the battery back in the laptop Step 8: Start laptop again and it should work Note 1: If your laptop does not work after inserting back the memory. Remove the memory and repeat above process. Do not insert the battery back as it is malfunctioning. Note 2: If your screen is faulty or have issues with your hardware (motherboard, screen or anything else) this method will not fix your computer. Once I followed above process, her computer worked. I was very delighted, that now I can go back to solving the problem where millions of transactions were waiting as I was fixing corrupted database and it the current state of the database was in emergency mode. Once I fixed the computer, I looked at my wife and asked. I: Well, now this laptop is back online, can I get guaranteed that she will get A+ in mathematics in this week’s quiz? Wife: Sure, I promise. I: Fantastic. After saying that I started to look at my database corruption and my wife interrupted me again. Wife: Btw, I forgot to tell you. Our daughter had got A in mathematics last week but she had another quiz today and she already have received A+ there. I kept my promise. I looked at her and she started to walk outside room, before I say anything my phone rang. DBA from eCommerce company had called me, as he was wondering why there is no activity from my side in last 10 minutes. DBA: Hey bud, are you still connected. I see um… no activity in last 10 minutes. I: Oh, well, I was just saving the world. I am back now. After two hours I had fixed the database corruption and everything was normal. I was outsmarted by my wife but honestly I still respect and love her the same as she is the one who spends countless hours with our daughter so she does not miss me and I can continue writing blogs and keep on doing technology evangelism. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Humor, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • SQL SERVER – Windows File/Folder and Share Permissions – Notes from the Field #029

    - by Pinal Dave
    [Note from Pinal]: This is a 29th episode of Notes from the Field series. Security is the task which we should give it to the experts. If there is a small overlook or misstep, there are good chances that security of the organization is compromised. This is very true, but there are always devils’s advocates who believe everyone should know the security. As a DBA and Administrator, I often see people not taking interest in the Windows Security hiding behind the reason of not expert of Windows Server. We all often miss the important mission statement for the success of any organization – Teamwork. In this blog post Brian tells the story in very interesting lucid language. Read On! In this episode of the Notes from the Field series database expert Brian Kelley explains a very crucial issue DBAs and Developer faces on their production server. Linchpin People are database coaches and wellness experts for a data driven world. Read the experience of Brian in his own words. When I talk security among database professionals, I find that most have at least a working knowledge of how to apply security within a database. When I talk with DBAs in particular, I find that most have at least a working knowledge of security at the server level if we’re speaking of SQL Server. One area I see continually that is weak is in the area of Windows file/folder (NTFS) and share permissions. The typical response is, “I’m a database developer and the Windows system administrator is responsible for that.” That may very well be true – the system administrator may have the primary responsibility and accountability for file/folder and share security for the server. However, if you’re involved in the typical activities surrounding databases and moving data around, you should know these permissions, too. Otherwise, you could be setting yourself up where someone is able to get to data he or she shouldn’t, or you could be opening the door where human error puts bad data in your production system. File/Folder Permission Basics: I wrote about file/folder permissions a few years ago to give the basic permissions that are most often seen. Here’s what you must know as a minimum at the file/folder level: Read - Allows you to read the contents of the file or folder. Having read permissions allows you to copy the file or folder. Write  – Again, as the name implies, it allows you to write to the file or folder. This doesn’t include the ability to delete, however, nothing stops a person with this access from writing an empty file. Delete - Allows the file/folder to be deleted. If you overwrite files, you may need this permission. Modify - Allows read, write, and delete. Full Control - Same as modify + the ability to assign permissions. File/Folder permissions aggregate, unless there is a DENY (where it trumps, just like within SQL Server), meaning if a person is in one group that gives Read and antoher group that gives Write, that person has both Read and Write permissions. As you might expect me to say, always apply the Principle of Least Privilege. This likely means that any additional permission you might add does not need Full Control. Share Permission Basics: At the share level, here are the permissions. Read - Allows you to read the contents on the share. Change - Allows you to read, write, and delete contents on the share. Full control - Change + the ability to modify permissions. Like with file/folder permissions, these permissions aggregate, and DENY trumps. So What Access Does a Person / Process Have? Figuring out what someone or some process has depends on how the location is being accessed: Access comes through the share (\\ServerName\Share) – a combination of permissions is considered. Access is through a drive letter (C:\, E:\, S:\, etc.) – only the file/folder permissions are considered. The only complicated one here is access through the share. Here’s what Windows does: Figures out what the aggregated permissions are at the file/folder level. Figures out what the aggregated permissions are at the share level. Takes the most restrictive of the two sets of permissions. You can test this by granting Full Control over a folder (this is likely already in place for the Users local group) and then setting up a share. Give only Read access through the share, and that includes to Administrators (if you’re creating a share, likely you have membership in the Administrators group). Try to read a file through the share. Now try to modify it. The most restrictive permission is the Share level permissions. It’s set to only allow Read. Therefore, if you come through the share, it’s the most restrictive. Does This Knowledge Really Help Me? In my experience, it does. I’ve seen cases where sensitive files were accessible by every authenticated user through a share. Auditors, as you might expect, have a real problem with that. I’ve also seen cases where files to be imported as part of the nightly processing were overwritten by files intended from development. And I’ve seen cases where a process can’t get to the files it needs for a process because someone changed the permissions. If you know file/folder and share permissions, you can spot and correct these types of security flaws. Given that there are a lot of database professionals that don’t understand these permissions, if you know it, you set yourself apart. And if you’re able to help on critical processes, you begin to set yourself up as a linchpin (link to .pdf) for your organization. If you want to get started with performance tuning and database security with the help of experts, read more over at Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • Elegance, thy Name is jQuery

    - by SGWellens
    So, I'm browsing though some questions over on the Stack Overflow website and I found a good jQuery question just a few minutes old. Here is a link to it. It was a tough question; I knew that by answering it, I could learn new stuff and reinforce what I already knew: Reading is good, doing is better. Maybe I could help someone in the process too. I cut and pasted the HTML from the question into my Visual Studio IDE and went back to Stack Overflow to reread the question. Dang, someone had already answered it! And it was a great answer. I never even had a chance to start analyzing the issue. Now I know what a one-legged man feels like in an ass-kicking contest. Nevertheless, since the question and answer were so interesting, I decided to dissect them and learn as much as possible. The HTML consisted of some divs separated by h3 headings.  Note the elements are laid out sequentially with no programmatic grouping: <h3 class="heading">Heading 1</h3> <div>Content</div> <div>More content</div> <div>Even more content</div><h3 class="heading">Heading 2</h3> <div>some content</div> <div>some more content</div><h3 class="heading">Heading 3</h3> <div>other content</div></form></body>  The requirement was to wrap a div around each h3 heading and the subsequent divs grouping them into sections. Why? I don't know, I suppose if you screen-scrapped some HTML from another site, you might want to reformat it before displaying it on your own. Anyways… Here is the marvelously, succinct posted answer: $('.heading').each(function(){ $(this).nextUntil('.heading').andSelf().wrapAll('<div class="section">');}); I was familiar with all the parts except for nextUntil and andSelf. But, I'll analyze the whole answer for completeness. I'll do this by rewriting the posted answer in a different style and adding a boat-load of comments: function Test(){ // $Sections is a jQuery object and it will contain three elements var $Sections = $('.heading'); // use each to iterate over each of the three elements $Sections.each(function () { // $this is a jquery object containing the current element // being iterated var $this = $(this); // nextUntil gets the following sibling elements until it reaches // an element with the CSS class 'heading' // andSelf adds in the source element (this) to the collection $this = $this.nextUntil('.heading').andSelf(); // wrap the elements with a div $this.wrapAll('<div class="section" >'); });}  The code here doesn't look nearly as concise and elegant as the original answer. However, unless you and your staff are jQuery masters, during development it really helps to work through algorithms step by step. You can step through this code in the debugger and examine the jQuery objects to make sure one step is working before proceeding on to the next. It's much easier to debug and troubleshoot when each logical coding step is a separate line. Note: You may think the original code runs much faster than this version. However, the time difference is trivial: Not enough to worry about: Less than 1 millisecond (tested in IE and FF). Note: You may want to jam everything into one line because it results in less traffic being sent to the client. That is true. However, most Internet servers now compress HTML and JavaScript by stripping out comments and white space (go to Bing or Google and view the source). This feature should be enabled on your server: Let the server compress your code, you don't need to do it. Free Career Advice: Creating maintainable code is Job One—Maximum Priority—The Prime Directive. If you find yourself suddenly transferred to customer support, it may be that the code you are writing is not as readable as it could be and not as readable as it should be. Moving on… I created a CSS class to see the results: .section{ background-color: yellow; border: 2px solid black; margin: 5px;} Here is the rendered output before:   …and after the jQuery code runs.   Pretty Cool! But, while playing with this code, the logic of nextUntil began to bother me: What happens in the last section? What stops elements from being collected since there are no more elements with the .heading class? The answer is nothing.  In this case it stopped because it was at the end of the page.  But what if there were additional HTML elements? I added an anchor tag and another div to the HTML: <h3 class="heading">Heading 1</h3> <div>Content</div> <div>More content</div> <div>Even more content</div><h3 class="heading">Heading 2</h3> <div>some content</div> <div>some more content</div><h3 class="heading">Heading 3</h3> <div>other content</div><a>this is a link</a><div>unrelated div</div> </form></body> The code as-is will include both the anchor and the unrelated div. This isn't what we want.   My first attempt to correct this used the filter parameter of the nextUntil function: nextUntil('.heading', 'div')  This will only collect div elements. But it merely skipped the anchor tag and it still collected the unrelated div:   The problem is we need a way to tell the nextUntil function when to stop. CSS selectors to the rescue: nextUntil('.heading, a')  This tells nextUntil to stop collecting sibling elements when it gets to an element with a .heading class OR when it gets to an anchor tag. In this case it solved the problem. FYI: The comma operator in a CSS selector allows multiple criteria.   Bingo! One final note, we could have broken the code down even more: We could have replaced the andSelf function here: $this = $this.nextUntil('.heading, a').andSelf(); With this: // get all the following siblings and then add the current item$this = $this.nextUntil('.heading, a');$this.add(this);  But in this case, the andSelf function reads real nice. In my opinion. Here's a link to a jsFiddle if you want to play with it. I hope someone finds this useful Steve Wellens CodeProject

    Read the article

  • Chrome and Firefox not able to find some sites after Ubuntu's recent update?

    - by gkr
    Loading of revision3.com in Chrome stops and status saying "waiting for static.inplay.tubemogul.com" grooveshark.com in Chrome never loads But wikipedia.org, google.com works just normal same behavior in Firefox too. I use wired DSL connection in Ubuntu 12.04. I guess this started happening after I upgraded the Chrome browser or Flash plugin few days ago from Ubuntu updates through update-manager. Thanks EDIT: Everything works normal in my WinXP. Problem is only in Ubuntu 12.04. This is what I get when I use wget gkr@gkr-desktop:~$ wget revision3.com --2012-06-12 08:58:01-- http://revision3.com/ Resolving revision3.com (revision3.com)... 173.192.117.198 Connecting to revision3.com (revision3.com)|173.192.117.198|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `index.html' [ ] 81,046 32.0K/s in 2.5s 2012-06-12 08:58:04 (32.0 KB/s) - `index.html' saved [81046] gkr@gkr-desktop:~$ wget static.inplay.tubemogul.com --2012-06-12 08:51:25-- http://static.inplay.tubemogul.com/ Resolving static.inplay.tubemogul.com (static.inplay.tubemogul.com)... 72.21.81.253 Connecting to static.inplay.tubemogul.com (static.inplay.tubemogul.com)|72.21.81.253|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2012-06-12 08:51:25 ERROR 404: Not Found. grooveshark.com nevers responses so I have to Ctrl+C to terminate wget. gkr@gkr-desktop:~$ wget grooveshark.com --2012-06-12 08:51:33-- http://grooveshark.com/ Resolving grooveshark.com (grooveshark.com)... 8.20.213.76 Connecting to grooveshark.com (grooveshark.com)|8.20.213.76|:80... connected. HTTP request sent, awaiting response... ^C gkr@gkr-desktop:~$ This is the apt term.log of updates I mentioned Log started: 2012-06-09 04:51:45 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 161392 files and directories currently installed.) Preparing to replace google-chrome-stable 19.0.1084.52-r138391 (using .../google-chrome-stable_19.0.1084.56-r140965_i386.deb) ... Unpacking replacement google-chrome-stable ... Preparing to replace libpulse0 1:1.1-0ubuntu15 (using .../libpulse0_1%3a1.1-0ubuntu15.1_i386.deb) ... Unpacking replacement libpulse0 ... Preparing to replace libpulse-mainloop-glib0 1:1.1-0ubuntu15 (using .../libpulse-mainloop-glib0_1%3a1.1-0ubuntu15.1_i386.deb) ... Unpacking replacement libpulse-mainloop-glib0 ... Preparing to replace libpulsedsp 1:1.1-0ubuntu15 (using .../libpulsedsp_1%3a1.1-0ubuntu15.1_i386.deb) ... Unpacking replacement libpulsedsp ... Preparing to replace sudo 1.8.3p1-1ubuntu3.2 (using .../sudo_1.8.3p1-1ubuntu3.3_i386.deb) ... Unpacking replacement sudo ... Preparing to replace flashplugin-installer 11.2.202.235ubuntu0.12.04.1 (using .../flashplugin-installer_11.2.202.236ubuntu0.12.04.1_i386.deb) ... Unpacking replacement flashplugin-installer ... Preparing to replace pulseaudio-utils 1:1.1-0ubuntu15 (using .../pulseaudio-utils_1%3a1.1-0ubuntu15.1_i386.deb) ... Unpacking replacement pulseaudio-utils ... Preparing to replace pulseaudio 1:1.1-0ubuntu15 (using .../pulseaudio_1%3a1.1-0ubuntu15.1_i386.deb) ... Unpacking replacement pulseaudio ... Preparing to replace pulseaudio-module-gconf 1:1.1-0ubuntu15 (using .../pulseaudio-module-gconf_1%3a1.1-0ubuntu15.1_i386.deb) ... Unpacking replacement pulseaudio-module-gconf ... Preparing to replace pulseaudio-module-x11 1:1.1-0ubuntu15 (using .../pulseaudio-module-x11_1%3a1.1-0ubuntu15.1_i386.deb) ... Unpacking replacement pulseaudio-module-x11 ... Preparing to replace shared-mime-info 1.0-0ubuntu4 (using .../shared-mime-info_1.0-0ubuntu4.1_i386.deb) ... Unpacking replacement shared-mime-info ... Preparing to replace pulseaudio-module-bluetooth 1:1.1-0ubuntu15 (using .../pulseaudio-module-bluetooth_1%3a1.1-0ubuntu15.1_i386.deb) ... Unpacking replacement pulseaudio-module-bluetooth ... Processing triggers for menu ... /usr/share/menu/downverter.menu: 1: /usr/share/menu/downverter.menu: Syntax error: word unexpected (expecting ")") Processing triggers for man-db ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Processing triggers for update-notifier-common ... flashplugin-installer: downloading http://archive.canonical.com/pool/partner/a/adobe-flashplugin/adobe-flashplugin_11.2.202.236.orig.tar.gz Installing from local file /tmp/tmpNrBt4g.gz Flash Plugin installed. Processing triggers for doc-base ... Processing 1 changed doc-base file... Registering documents with scrollkeeper... Setting up google-chrome-stable (19.0.1084.56-r140965) ... Setting up libpulse0 (1:1.1-0ubuntu15.1) ... Setting up libpulse-mainloop-glib0 (1:1.1-0ubuntu15.1) ... Setting up libpulsedsp (1:1.1-0ubuntu15.1) ... Setting up sudo (1.8.3p1-1ubuntu3.3) ... Installing new version of config file /etc/pam.d/sudo ... Setting up flashplugin-installer (11.2.202.236ubuntu0.12.04.1) ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Setting up pulseaudio-utils (1:1.1-0ubuntu15.1) ... Setting up pulseaudio (1:1.1-0ubuntu15.1) ... Setting up pulseaudio-module-gconf (1:1.1-0ubuntu15.1) ... Setting up pulseaudio-module-x11 (1:1.1-0ubuntu15.1) ... Setting up shared-mime-info (1.0-0ubuntu4.1) ... Setting up pulseaudio-module-bluetooth (1:1.1-0ubuntu15.1) ... Processing triggers for menu ... /usr/share/menu/downverter.menu: 1: /usr/share/menu/downverter.menu: Syntax error: word unexpected (expecting ")") Processing triggers for libc-bin ... ldconfig deferred processing now taking place Log ended: 2012-06-09 04:53:32 This is from history.log Start-Date: 2012-06-09 04:51:45 Commandline: aptdaemon role='role-commit-packages' sender=':1.56' Upgrade: shared-mime-info:i386 (1.0-0ubuntu4, 1.0-0ubuntu4.1), pulseaudio:i386 (1.1-0ubuntu15, 1.1-0ubuntu15.1), libpulse-mainloop-glib0:i386 (1.1-0ubuntu15, 1.1-0ubuntu15.1), sudo:i386 (1.8.3p1-1ubuntu3.2, 1.8.3p1-1ubuntu3.3), pulseaudio-module-bluetooth:i386 (1.1-0ubuntu15, 1.1-0ubuntu15.1), pulseaudio-module-x11:i386 (1.1-0ubuntu15, 1.1-0ubuntu15.1), flashplugin-installer:i386 (11.2.202.235ubuntu0.12.04.1, 11.2.202.236ubuntu0.12.04.1), pulseaudio-utils:i386 (1.1-0ubuntu15, 1.1-0ubuntu15.1), pulseaudio-module-gconf:i386 (1.1-0ubuntu15, 1.1-0ubuntu15.1), libpulse0:i386 (1.1-0ubuntu15, 1.1-0ubuntu15.1), libpulsedsp:i386 (1.1-0ubuntu15, 1.1-0ubuntu15.1), google-chrome-stable:i386 (19.0.1084.52-r138391, 19.0.1084.56-r140965) End-Date: 2012-06-09 04:53:32

    Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95  | Next Page >