Search Results

Search found 3006 results on 121 pages for 'virus scan'.

Page 89/121 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96 | Next Page >

My new SSD is causing issues. How can I solve them?

- by Allan

Computer specs 1 TB harddisc 120 GB 520intel SSD 8 GB DDR3 RAM Athlon Phenom II x64 955 3. 2ghz DK DFI Lanparty FX7900 M3H3 motherboard ASUS ATI RADEON HD6970 2 GB I have bought a new SSD (Intel 520, 120 GB), and wanted to use this as my system disc. I removed the other harddisc, and installed the SSD with the newest firmware. And then Windows 7 I updated Windows 7 with no problems and then put back my old harddrive. I formatted that old harddrive just to clean up at the same time... So at this stage everything was perfect. My new SSD was set as Master 0 Primary it boots on it and I have 1 TB emptyu harddrive I can use for whatever I want. So far no errors at all Now here is the problem, I installed a few games and everytime I tried to play the computer would say Windows must restart because DCOM server process launcher service terminated, or it says Windows must now restart because the Plug and Play service terminated unexpectedly Most commonly this error is caused by a rootkit virus, well I have tried formatting my entire computer, and running every antivirus I could find, so that shouldn't be it. I've also read somewhere it might happen when there are hardware issues. That on the otherhand would make sense, as I just put in a new SSD. I don't expect you to know this error. I haven't found anyone who knew it yet. maybe you can me guide through what might have gone wrong when I placed in the SSD? What have I checked regarding the SSD? It displays the right name when the computer starts up It has the newest firmware Did a 'sfc /scannow' which told me everything was fine I don't know what to do from here. Everything seems to work great with the drive. when I start playing games my computer crashes.

Read the article
MEMORY(HEAP) vs. InnoDB in a Read and Write Envirnment

- by Johannes

I want to programm a real-time application using MySQL. It needs a small table (less than 10000 rows) that will be under heavy read (scan) and write (update and some insert/delete) load. I am really speaking of 10000 updates or selects per second. These statements will be executed on only a few (less than 10) open mysql connections. The table is small and does not contain any data that needs to be stored on disk. So I ask which is faster: InnoDB or MEMORY (HEAP)? My thoughts are: Both enginges will probably serve SELECTs directly from memory, as even InnoDB will cache the whole table. What about the UPDATAEs? (innodb_flush_log_at_trx_commit?) My main concern is the locking behavior: InnoDB row lock vs. MEMORY table lock. Will this present the bottleneck in the MEMORY implementation? Thanks for your thoughts!

Read the article
Help with Regex statement in Ruby

- by user336777

I have a string called 'raw'. I am trying to parse it in ruby in the following way: raw = "HbA1C ranging 8.0—10.0%" raw.scan /\d*.?\d+[ ](-+|\342\200\224)[ ]\d*.?\d+/ The output from the above is []. I think it should be: ["8.0—10.0"]. Does anyone have any insight into what is wrong with the above regex statement? Note: \342\200\224 is equal to '—'. The piece that is not working is: (-+|\342\200\224) I think it should be equivalent to saying, match on 1 or more '-' OR match on the string \342\200\224. Any help would be greatly appreciated it!

Read the article
How can I search for a string in a .txt file for NSScanner?

- by pixelbitapps

I currently have the following code to get a certain piece of code from the UIWebView: NSURL *requestTimetableURL = [NSURL URLWithString:@"http://www.dhsb.org/index.phtml?d=201435"]; NSLog(@"Loaded Timetable"); NSError *error; NSString *page = [NSString stringWithContentsOfURL:requestTimetableURL encoding:NSASCIIStringEncoding error:&error]; [webView loadHTMLString:page baseURL:requestTimetableURL]; NSString* Period1; NSScanner *htmlScanner = [NSScanner scannerWithString:page]; [htmlScanner scanUpToString:@"<P align=center><STRONG><FONT color=#c00000>" intoString:NULL]; [htmlScanner scanString:@"<P align=center><STRONG><FONT color=#c00000>" intoString:NULL]; [htmlScanner scanUpToString:@"</FONT>" intoString:&Period1]; How can I scan a .txt file (which contains the string like above) for the code? E.G. [htmlScanner scanUpToString:teststring intoString:NULL]; Thanks!

Read the article
One workstation gets slow access to the server, but others are fast

- by Mike Hanson

I've just setup a machine with Windows Server 2008. It hosts various services, like IIS, POP3, SMTP, Music for Squeezeboxes, VNC. All was working well for the first week or so. One day I needed to create a mapped drive on the server, so it could access files on my workstation. Windows indicated that Network Discovery was needed, so I turned it on with the "Home / Office" option (rather than "Public"). This may be coincidence, but since that time I've been having troubles accessing various services from my main workstation (running Windows 7/64): POP3 continued working correctly, but SMTP was delayed or failed entirely. (Telnet took 20 seconds to connect, but Outlook would never send messages.) VNC failed entirely. I reinstalled it on the server, and now it works but feels sluggish. The music web server was extremely delayed and usually failed. I tried reinstalling, and now it takes about 30 seconds to show the page name on the browser tab, and another 30 seconds to display any page contents. Other machines on the local network seem fine, as do machines connected via the Internet. I don't believe I changed anything on my own machine that would cause this. I considered the possibility that my anti-virus was involved, so I uninstalled AVG (commercial version), but that didn't help. I installed Norton 360 after that, and it didn't complain of viruses on my machine, and the delays remained. Because only my machine is affect, I'm tempted to blame it, except that reinstalling software on the server improved the situation, so there is almost certainly something going on with the server too. The firewall has all the necessary ports open, and it works fine for the other workstations (including external machines connected via the Internet), which indicates that it should be OK. Any ideas?

Read the article
Client cannot access my IIS7 web server

- by Soccerwiz

I have a Windows 2008 web server on running IIS 7 with about 25 websites. One of those sites is an SaaS application that is accessed constantly throughout the day. However, one particular client keeps getting blocked from my server. They will be using the service, and then all of a sudden they cannot access the program, or any other site on the server. The entire office of 4 users is blocked from accessing anything on the web server. A trace route reveals they get all the way to the server before they are blocked. However, they can access a linux server that is a different VM with a different IP on the same physical server. Also, when they are blocked from their office, they can still access the site from their mobile phone or local Starbucks. They can also occasionally reset the router and gain access to the web server again as they are on a dynamic IP address. I checked IIS and allow all IPs to access the server. There is nothing in the logs the says anything about a user being banned. I really have no idea what is causing this? Could it be a virus on their end? I have even moved the SaaS to a completely new server in a different location, and they were working fine for about a month, and then the problem started occurring again. Are there any hidden blacklists in IIS? Or is it a routing issue on their end?

Read the article
FreeBSD jail IMAP/MTA config recommendations

- by kobame

I've got access to my "own" FreeBSD jail. The jail has only basic, unconfigured system, but I have full access to FreeBSD ports, and (jail)root too. Now I need to setup my jail as IMAP/MTA. The question: What packages are EASIEST for config and later administration, (the simplest possible setup, with the minimum needed configuration) when: i haven't any preferences (don't know any yet) my (one) domain is managed by ISP, so don't need DNS need only IMAP for few users (up to 20 mailboxes) need secure transport layer (IMAPS/993) password auth, no LDAP, no kerberos, nor databases, nothing like fancy things... need easy-setup easy-admin MTA, with simplest possible password SMTP auth, (again no LDAP, nor DB), secure transport layer but would be nice have virus-scan and some anti-spam protection So, what ports I should install for MTA and IMAP? MTA (Sendmail, Postfix, Exim)? antivirus (ClamAV) antispam??? IMAP(S), (Dovecot, Courier) when the main criteria are: easy setup, and easy administration. When I googled I found only complicated setups for thousands of users with LDAP, databases and so on - too big-caliber for my small (easy?) needs. Any pointer to an easy howto is very welcomed.

Read the article
Is this a legitimate registry key? (windows 7)

- by Keyes

In hkey_local_machine/software/classes I found some registry keys named msime.taiwan, msime.japan and a couple others with similar names, except with a number at the end of, so there was 4 keys altogether. From what I know itmcoulc be associated with a thing in windows that lets you write japanese characters or whatever. I also found a macaffee page, , which seemed dated but it said the key is created by a virus named w32 virut. Just wondering is this a legit key? I found it on another pc and both pcs show when exported to a .txt show it was last written to in 2009. Here is the reg query for the 4 keys. (added lines to differentiate them.) HKEY_LOCAL_MACHINE\Software\Classes\MSIME.Japan (Default) REG_SZ Microsoft IME (Japanese) HKEY_LOCAL_MACHINE\Software\Classes\MSIME.Japan\CLSID (Default) REG_SZ {6A91029E-AA49-471B-AEE7-7D332785660D} HKEY_LOCAL_MACHINE\Software\Classes\MSIME.Japan\CurVer (Default) REG_SZ MSIME.Japan.11 HKEY_LOCAL_MACHINE\Software\Classes\MSIME.Japan.11 (Default) REG_SZ Microsoft IME (Japanese) HKEY_LOCAL_MACHINE\Software\Classes\MSIME.Japan.11\CLSID (Default) REG_SZ {6A91029E-AA49-471B-AEE7-7D332785660D} HKEY_LOCAL_MACHINE\Software\Classes\MSIME.Taiwan\CLSID (Default) REG_SZ {F407D01A-0BCB-4591-9BD6-EA4A71DF0799} HKEY_LOCAL_MACHINE\Software\Classes\MSIME.Taiwan\CurVer (Default) REG_SZ MSIME.Taiwan.8 HKEY_LOCAL_MACHINE\Software\Classes\MSIME.Taiwan.8 (Default) REG_SZ IMTCCORE HKEY_LOCAL_MACHINE\Software\Classes\MSIME.Taiwan.8\CLSID (Default) REG_SZ {F407D01A-0BCB-4591-9BD6-EA4A71DF0799}

Read the article
Floating point precision nuances.

- by user247077

Hi, I found this code in NVIDIA's cuda SDK samples. void computeGold( float* reference, float* idata, const unsigned int len) { reference[0] = 0; double total_sum = 0; unsigned int i; for( i = 1; i < len; ++i) { total_sum += idata[i-1]; reference[i] = idata[i-1] + reference[i-1]; } // Here it should be okay to use != because we have integer values // in a range where float can be exactly represented if (total_sum != reference[i-1]) printf("Warning: exceeding single-precision accuracy. Scan will be inaccurate.\n"); } (C) Nvidia Corp Can somebody please tell me a case where the warning would be printed, and most importantly, why. Thank you very much.

Read the article
Using DataPager Control with AJAX and SEO

- by Jonathan Wood

I've just taken my first stab at making a ListView, ObjectDataSource, and DataPager run in an AJAX panel. I had trouble getting it to work until I removed the QueryStringField="page" attribute from the DataPager. This attribute causes the current page to be passed as a query argument in the URL. For obvious reasons, I guess that won't work when posting back using AJAX. Now my question is if this hurts my SEO. When I used QueryStringField, the page links appeared as regular links with various query arguments. But now the links are just javascript. Haven't I hurt a search engine's ability to scan related pages? Or is there another approach to this?

Read the article
Getting a "summary" of a webpage

- by MattiasK

I have something of a a hairy problem, I'd like to generate a couple of paragraphs of "description" of a given url, normally the start of an article. The Meta description field is one way to go but it isn't always good or set properly. It's fair to say it's a bit problematic to accomplish this from the screenscraped HTML. I had a general idea that perhaps one could scan the HTML for the first "appropriate" segment but it's hard to say what that is, perhaps something like the first paragraph containing a certain amount of text... Anyone have any good ideas? :) It doesn't have to be foolproof

Read the article
Laptop freezing every few seconds, including screen + sound

- by zenstealth

Just a few days ago, my Windows 7 HP dv4170us (1.76Ghz CPU, 1GB Ram) laptop started to freeze every other second where everything on screen and and sound (such as a song playing in iTunes) would just freeze until I bash it violently (without actually breaking the laptop) or wait for a couple of more seconds. I think it started one night when I noticed that a USB mouse of mine stopped working, and it displayed random "Device was not recognized" errors. I just unplugged the mouse and ignored it. Skip forward to the next day, is started freezing, and as of today I can't get my computer to not keep freezing. I tried to backup my files onto an external hdd, but it almost corrupted the drive. I ran 4 complete virus scans using MSSE and MalwareBytes (both quick and full scans), and they all came up clean. In the Task manager, the CPU usage is on a constant max, and so is the RAM (if I have just a few apps running, I only have like 30Mb of free RAM left). Also, on the outside of my laptop, right above where the CPU is located, it's very, very hot. I suspect that something is wrong internally within inside of the computer, but I'm not sure. It also does the same thing when booted into Ubuntu.Does anyone know what could be wrong with it?

Read the article
Application that will identify percentage of your system disk bandwidth used on a user-application by user-application basis?

- by Warren P

I always (subjectively) feel my computer is far too slow (however fast it is), and so I'm always looking for ways to measure and understand what my computer is actually doing, that is making it seem "slow" to me. It has been my observation that my software-developer workload is most often disk-bound (I am waiting for Disk I/O) more than CPU bound. What has made it worse, is that I am using a corporate PC that has in-memory active-scanning anti-virus software that I do not have control over, and also some IT department mandated services that seem to suck up a lot of available hard-disk bandwidth. The best tool I have seen (in Windows 7) is the Resource Monitor which I usually acess from the button in the task Manager. The disk IO page, however, seems to label Disk Activity at a very low level (for example, showing the Volume Shadow Storage, which is flushing information obviously written by something ELSE other than VSS itself, and then writes to Pagefile.sys, which are obviously due to Virtual Memory faults in some application). What I would like to know is if a utility exists that can add up all direct disk input and output by user-level process, or find the process or service that caused VM or VSS activity. In that way, I hope, you could establish a real idea of how much of your computer's precious disk subsystem bandwidth is attributable to a particular application. here's a scenario: MyApp.exe writes 100k/s and reads 100k/s directly. VSS ends up writing another 100k/s. pagefaults caused inside MyApp.exe cause another 100k/s of writes. So the total "cost" of MyApp.exe running, during a period of time (let's say 1 second) is 400k/s, whereas you can only directly observe half of that, in Resource Monitor. Is there a smarter disk-IO watching piece of software I can use?

Read the article
Why is my Toshiba Satellite L675D laptop not connecting to my HD TV using an HDMI cord?

- by Akasha Eyre

I'm having a problem connecting my Toshiba Satellite L675 laptop to my Samsung HD TV. I've done it before using an HDMI cord but now, for some odd reason, it's not connecting at all. My computer screen before would go completely black for a second & then come back & (with it being attached to the TV with the HDMI cord & it being on the proper channel) it would make a sound, come on & work beautifully. Now, I try hooking it up & it doesn't do anything. No black screen, no sound. The TV screen just says there's no connection & that I need to check out the power source. I'm still checking around, trying to find out if there's a virus in my computer (since my dad & I have the same computer & he can connect his to the TV with no problems), or if I deleted something that had to do with the connection. I've tried turning my computer off & letting it sit for a while, I've tried checking out other websites & have come up with nothing.

Read the article
How can one restrict network activity to only the VPN on a Mac and prevent unsecured internet activity?

- by John

I'm using Mac OS and connect to a VPN to hide my location and IP (I have the 'send all traffic over VPN connection' box checked in teh Network system pref), I wish to remain anonymous and do not wish to reveal my actual IP, hence the VPN. I have a prefpan called pearportVPN that automatically connects me to my VPN when I get online. The problem is, when I connect to the internet using Airport (or other means) I have a few seconds of unsecured internet connection before my Mac logs onto my VPN. Therefore its only a matter of time before I inadvertently expose my real IP address in the few seconds it takes between when I connect to the internet and when I log onto my VPN. Is there any way I can block any traffic to and from my Mac that does not go through my VPN, so that nothing can connect unless I'm logged onto my VPN? I suspect I would need to find a third party app that would block all traffic except through the Server Address, perhaps Intego Virus Barrier X6 or little snitch, but I'm afraid I'm not sure which is right or how to configure them. Any help would be much appreciated. Thanks!

Read the article
is there a man in the middle attacking to my server machine?

- by GongT

My server works well about half a year. But a strange thing happened (several hours before). This server has two IP-address 58.17.85.19 & 117.21.178.19 When I navigate to http://58.17.85.19, nothing different as before. But http://117.21.178.19 will return a "302 Object moved" and become a "redirect loop" I do some test: ($cmd = "wget http://117.21.178.19/?xx=$RANDOM --max-redirect 0 -S --no-cache -O -") Step by step: run $cmd on my PC and my firend's one (we live in two side of China, far away). - got 302 run $cmd on this server - got 200 OK (content is correct result of index.php) run $cmd on another server in same computer room - got 200 OK telnet from my PC and build an HTTP request (type by hand) - got 200 OK shutdown php-fpm, run $cmd on my PC - got 302 run $cmd on server - 502 Bad Gateway shutdown nginx, run $cmd on both the server and my PC - Connection refused. create iptables rule, refuse any connection to 58.17.85.19:80. run nc -l 80 -k -vvv on server and run $cmd on my PC NC show me that.... Server accept connection (Connection from [my ip]) My connection closed ! (Remove fd xx from list) wget dump out response - got 302 I know that, normaly, NC will accept connection, then dump HTTP request from client, and client will wait for response. this connection will open forever(infact client will close connection becouse timeout), becouse NC can't give any response. So... where my request gone? who send an response to the client? some virus on my server system? If so, why 58.17.85.19 didn't has this error? or... I was attacked by a middleman?

Read the article
Windows 7 automatically logs out when logging in

- by Luke

A Windows 7 HP x64 computer is set to automatically log in (no password), but once it starts logging in, it starts to load the desktop after the welcome screen, but before icons or background images are loaded, it goes to the Welcome screen saying 'Logging Off'. I can log in with Safe Mode, and I ran a couple different virus scans, with no detections. I also tried checking the userinit.exe file in System32 (as suggested by MANY users for Windows XP), but it's the same version as a working system. I also checked the registry under HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon for the SHELL and UserInit values, but they look normal. I tried to disable all startup items (through MSCONFIG) to select Diagnostic boot, but then I get a blue screen about the video driver not loading. Any other ideas? EDIT I created a new user, and it could log in no problems. I am thinking it's the NTUSER.DAT file. I just renamed it to NTUSER.DAT.old, then tried logging in as the problem user. I could log in, but as a TEMP profile. His profile folder is now C:\Users\TEMP, and his old folder is still accessible but in the wrong location. EDIT 2 I can't seem to turn off the TEMP profile, so I'm open to other suggestions. Copying the folders (i.e. Documents, Music, etc) does not work, as it creates an additional TEMP.000 then TEMP.001 folder each time the user logs in.

Read the article
Is there an Installer Analyser tool that can list what Registry Keys will be created?

- by EvoGamer

I can think of 3 ways to achieve my goal: Create a clean VPC, install a given piece of software, and compare the before and after states. Somehow reverse-engineer the installer. Somehow redirect the output of the installer in question so that all registry calls and copy/move file commands are recorded, but not executed. The first option can be done manually, or potentially automated, but I feel it's rather OTT for my needs. The second could cause all sorts of licencing issues, not to mention it may not always return a correct result. Also, without delving into hex editing, I can't think of a way that it would be possible to do manually (some installers - eg Anti-Virus software - may react unfavourably on automated attempts to investigate the installer). The third option shows the most promise, although if the first could be stripped down into a lightweight throwaway environment, it would work pretty much the same way. However, I'm not sure how to do it. So my question is: What tools are available (if any) and/or how could I find out this information manually? I'm not looking to reverse-engineer anything (if I can help it), but I just want to know exactly what changes are being made to my PC by a given piece of software.

Read the article
Can't access YouTube

- by Agentleader1

I can not seem to connect to YouTube at all. If I connect directly to YouTube (youtube.com) I get this: And if I try to connect via video directly (youtube.com/watch?v=), I get this: Here's how this isn't a web issue: I have malware on my computer I believe. And the question here is, how do I get rid of it, or what possible issue could this be? I can verify this is not a website issue or wifi issue, I've tried to connect on another computer in my wifi, and it worked. It is the local machine issue. I've tried to get rid of malware at my best and also have tried to disable possible virus extensions. All can out as the same result: no help. Also, I am unable to find these hiding viruses. I used malware-bytes and Microsoft Security Essentials. Edit: This is OBVIOUSLY Windows. I am currently running on a laptop Windows 7 Home Premium 4gb ram 64-bit os Lifebook series manufactured by Fujitsu America, Inc. Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz nslookup youtube.com:

Read the article
Can't access certain web sites - reset router, any ideas?

- by IniTech

EDIT: This problem was resolved by my ISP - had to do with damaged fiber in one of their locations. Thanks to everyone that helped. Not sure if this is the right site (I'm a StackOverflow user) so I thought I'd give it a shot. I'm having trouble connecting to certain sites on any of the 3 machines that are on my LAN. The following sites are returning "Problem Loading Page - The connection has timed out" Sourceforge.net CNet.com Microsoft.com OpenDNS.com even my company's webiste I was worried about possible malware/virus, but I don't think that is the case (given the inability to access my company's site and the fact that all 3 machines are having the same issues.) I've tried with IE8, FF, and Chrome I have reset my router (WRT54G) and my machine(s) multiple times. EDIT: It is also worth noting that this page spins constantly and no avatars show up (I'm assuming it is trying to access gravatar.com with no success.) EDIT: I have the same issues directly connected to the modem. So, any router config is probably not the issue I'm a programmer, not a network guy - any ideas?

Read the article
How can one restrict network activity to only the VPN on a Mac and prevent unsecured internet activity?

- by John

I'm using Mac OS and connect to a VPN to hide my location and IP (I have the 'send all traffic over VPN connection' box checked in teh Network system pref), I wish to remain anonymous and do not wish to reveal my actual IP, hence the VPN. I have a prefpan called pearportVPN that automatically connects me to my VPN when I get online. The problem is, when I connect to the internet using Airport (or other means) I have a few seconds of unsecured internet connection before my Mac logs onto my VPN. Therefore its only a matter of time before I inadvertently expose my real IP address in the few seconds it takes between when I connect to the internet and when I log onto my VPN. Is there any way I can block any traffic to and from my Mac that does not go through my VPN, so that nothing can connect unless I'm logged onto my VPN? I suspect I would need to find a third party app that would block all traffic except through the Server Address, perhaps Intego Virus Barrier X6 or little snitch, but I'm afraid I'm not sure which is right or how to configure them. Any help would be much appreciated. Thanks!

Read the article
Which "platform" should we use for a notifier-component?

- by cwap

Hi all We need to develop a notifier component. What it will do, is to scan a database at given intervals (say, every 15th minute), to see if any notifications needs to be sent out. We're running on Windows, and so we've been looking into either a Windows Service or the Windows Task Scheduler. Our biggest concern is the robustness of our implementation. If it, for some reason, crashes, can it be auto-restarted the next interval? Can we use custom logging logic, to take care of crashes? I'd like an educated guess on what to use here :) Feel free to say if you need additional info, to make such a guess.. Props will be given if someone could make a short listing of the pros n cons of a windows service vs. the windows task scheduler. Also, it should be noted, that we aren't set on either of these, so if you have any alternatives, please, do post away. Thanks in advance :)

Read the article
Does having a longer string in a SQL Like expression allow hinder or help query executing speed?

- by Allain Lalonde

I have a db query that'll cause a full table scan using a like clause and came upon a question I was curious about... Which of the following should run faster in Mysql or would they both run at the same speed? Benchmarking might answer it in my case, but I'd like to know the why of the answer. The column being filtered contains a couple thousand characters if that's important. SELECT * FROM users WHERE data LIKE '%=12345%' or SELECT * FROM users WHERE data LIKE '%proileId=12345%' I can come up for reasons why each of these might out perform the other, but I'm curious to know the logic.

Read the article
Strategy for Storing Multiple Nullable Booleans in SQL

- by Eric J.

I have an object (happens to be C#) with about 20 properties that are nullable booleans. There will be perhaps a few million such objects persisted to a SQL database (currently SQL Server 2008 R2, but MySQL may need to be supported in the future). The instances themselves are relatively large because they contain about a paragraph of text as well as some other unrelated properties. For a given object instance, most of the properties will be null most of the time. When users search for instances of such objects, they will select perhaps 1-3 of the nullable boolean properties and search for instances where at least one of those 1-3 properties is non-null (OR search). My first thought is to persist the object to a single table with nullable BIT columns representing the nullable boolean properties. However, this strategy will require one index per BIT column to avoid performing a table scan when searching. Further, each index would not be particularly selective since there are only three possible values per index. Is there a better way to approach this problem?

Read the article
How to check if canvas objects overlap each other

- by ?????? ???????

I'm trying to check if two objects (e.g. a rectangle and a triangle) on a HTML5 canvas are overlapping each other. Currently I can only check that by looking at the screen (having set globalCompositeOperation='lighter'). My first idea would have been to scan all over the canvas if the "lighter" (compare code snippet above) color exists in the canvas. But therefor I would have to look at every single pixel which was rather costly for what I need. Is there a (better) alternative to automatically check if they are overlapping? Best regards.

Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96 | Next Page >