Search Results

Search found 68399 results on 2736 pages for 'windows scripting host'.

Page 89/2736 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• How do I connect two computers with a LAN cable?

  - by John

  I have two machines - Windows XP and a laptop using Windows 7. I connected them with a WLAN cable. On the Windows XP machine, I set the IP address to 192.168.0.10. On the Windows 7 laptop, I set the IP address to 192.168.0.20. The laptop can see the Windows XP machine, but Windows XP machine cannot see the Windows 7 machine. But this does NOT concern me. I want to move the files from my desktop (Windows XP) to Windows 7 (laptop). That's why I'm going through all this. The problem is that when I try to connect from Windows 7 to Windows XP machine, I get this window: I don't understand what username/password is needed. I use none on the Windows XP machine. I tried all usernames - no success. Please explain in deep details how to solve my problem so I can connect to my Windows XP machine. EDIT: Maybe this can help: the Windows XP machine is named 'I' and '???????? III' is the name of the laptop. Both computers share one workgroup - WORKGROUP.

  Read the article

• Virtual Win XP Mode stopped HP LJ Pro M1212nf MFP printing in Win 7 Pro

  - by Dee

  Virtual Win XP Mode stopped HP LJ Pro M1212nf MFP printing in Win 7 Pro: I am running Windows 7 Pro with Virtual Windows XP Mode. My printer is HP LaserJet Pro M1212nf MFP attached directly to a USB port of the computer. This printer was working fine in Windows 7, until I tried to attach the printer to the Virtual Windows XP Mode in order to load the printer driver in the Virtual Windows XP Mode. At that point, the printer disappeared from the list of USB devices on the toolbar at the top of the window of the Virtual Windows XP Mode. After installing the printer driver in the Virtual Windows XP Mode, the printer did not work in that mode and also no longer worked in Windows 7. In Windows 7 and in the Virtual Windows XP Mode, print files are sent to the print queue, but are never printed. In Windows 7, the print queue states that the printer is offline. In the Virtual Windows XP Mode, the printer can be toggled from "Print Offline" to "Print Online", but no print files are ever printed from the print queue. The printer acts as though it is no longer connected to the computer, even though it is still physically connected to the USB port of the computer. How can I get the printer to work again in Windows 7? (At this point, I am no longer interested in using the Virtual Windows XP Mode.) I have tried a large number of things to find and fix the printer problem, but have had no success. Device Manager cannot see the printer even though it is physically connected via USB port (have tried different USB ports) to the computer. Restoring Win 7 and Virtual Win XP Mode to times before the problem does not fix the problem. How can I get the computer to see the printer, so that I can print again in Win 7?

  Read the article

• Can't ping a DNS zone on windows server 2008 R2

  - by Roberto Fernandes

  I´ve just configured a windows server 2008 r2, but got a lot of problems on DNS role. Let me talk about the server configuration: name: fdserver IP address: 192.168.0.10 I have a DNS zone called "fd.local". This is my domain and it´s working ok. I´ve created a zone called fdserver, and inside this zone a record (A) with "*" as a host. because this is a webserver, i´ve configured apache so if you enter something like "site.fdserver" it will point you to the "site" folder. This is working ok ONLY inside the server. This server is a DNS server too... and have 3 entries: 192.168.0.10 (his own IP), 8.8.8.8 and 8.8.4.4 (google public DNS). Now start the problems... Most of the computers on my network, CAN join the domain without problems. But just CAN'T ping "something.fdserver". Now comes the strange thing... If I remove the twoo secondary entries on my DNS server (8.8.8.8 and 8.8.4.4), it obvious stop accessing websites (like microsoft.com), but now the computer CAN ping "something.fdserver". I don´t know If I explained correctly... and my English is terrible... but inside the server is all working as it supposed to work. But in the workstation machines, it work only if I remove the secondary DNS!! If you need any details, just ask! thanks!

  Read the article

• Running Windows Update inside Windowx XP Mode

  - by Noam Gal

  I am working on a Win 7 Ultimate machine, and was using XP for some development tasks (for compatibility checks). Everything worked like a charm on the XP, including updates. Two days ago I had to switch computer (mainly a new motherboard/cpu), and I had just stuck my old HD inside the newer case. Win 7 worked like a charm - installed all the new drivers, identified everything automatically, no sweat. The trouble started when I tried running my old XP mode - it won't launch, complaining about the cpu change. I figured it's not a big deal, and I deleted the VM, and re-ran XP mode. It told me it can't find it, and offered to create a new one, just what I wanted. I had finished setting up the new XP mode VM, and it seems to work just fine. Got it to use the host network adapter, so I can surf from "inside". But I can't get Windows Update to run. Whenever I click on the "Custom" button on the WU site, after a short while, I get the [Error number: 0x80072EFD] page. I tried several solution from around the web for it (clearing some cache and restarting the wuauserv, even a microsoft fix-it run), but still nothing seems to work. Anyone here has any new tip for me? Thanks.

  Read the article

• Windows 2008 R2 Servers Sending Arp Requests for IPs outside Subnet

  - by Kyle Brandt

  By running a packet capture on my my routers I see some of my servers sending ARP requests for IPs that exist outside of its network. For example if my network is: Network: 8.8.8.0/24 Gateway: 8.8.8.1 (MAC: 00:21:9b:aa:aa:aa) Example Server: 8.8.8.20 (MAC: 00:21:9b:bb:bb:bb) By running a capture on the interface that has 8.8.8.1 I see requests like: Sender Mac: 00:21:9b:bb:bb:bb Sender IP: 8.8.8.20 Target MAC: 00:21:9b:aa:aa:aa Target IP: 69.63.181.58 Anyone seen this behavior before? My understanding of ARP is that requests should only go out for IPs within the subnet... Am I confused in my understanding of ARP? If I am not confused, anyone seen this behavior? Also, these seem to happen in bursts and it doesn't happen when I do something like ping an IP outside of the network. Update: In response to Ian's questions. I am not running anything like Hyper-V. I have multiple interfaces but only one is active (Using BACS failover teaming). The subnet mask is 255.255.255.0 (Even if it were something different it wouldn't explain an IP like 69.63.181.58). When I run MS Network Monitor or wireshark I do not see these ARP requests. What happens is that on the router capturing I see a burst of about 10 requests for IPs outside of the network from the host machine. On the machine itself using wireshark or NetMon I see a flood of ARP responses for all the machines on the network. However, I don't see any requests in the capture asking for those responses. So it seems like maybe it is maybe refreshing the arp cache but including IPs that outside of the network. Also when it does this NetMon doesn't show the ARP requests?

  Read the article

• Problems installing Windows service via Group Policy in a domain

  - by CraneStyle

  I'm reasonably new to Group Policy administration and I'm trying to deploy an MSI installer via Active Directory to install a service. In reality, I'm a software developer trying to test how my service will be installed in a domain environment. My test environment: Server 2003 Domain Controller About 10 machines (between XP SP3, and server 2008) all joined to my domain. No real other setup, or active directory configuration has been done apart from things like getting DNS right. I suspect that I may be missing a step in Group Policy that says I need to grant an explicit permission somewhere, but I have no idea where that might be or what it will say. What I've done: I followed the documentation from Microsoft in How to Deploy Software via Group Policy, so I believe all those steps are correct (I used the UNC path, verified NTFS permissions, I have verified the computers and users are members of groups that are assigned to receive the policy etc). If I deploy the software via the Computer Configuration, when I reboot the target machine I get the following: When the computer starts up it logs Event ID 108, and says "Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was: An operations error occurred." There are no previous log entries to check, which is weird because if it ever actually tried to invoke the windows installer it should log any sort of failure of my application's installer. If I open a command prompt and manually run: msiexec /qb /i \\[host]\[share]\installer.msi It installs the service just fine. If I deploy the software via the User Configuration, when I log that user in the Event Log says that software changes were applied successfully, but my service isn't installed. However, when deployed via the User configuration even though it's not installed when I go to Control Panel - Add/Remove Programs and click on Add New Programs my service installer is being advertised and I can install/remove it from there. (this does not happen when it's assigned to computers) Hopefully that wall of text was enough information to get me going, thanks all for the help.

  Read the article

• Windows 8.1 in a VMWare Workstation 10 guest's mouse is missing, but only sometimes

  - by Rob Perkins

  I have VMWare Workstation 10 running on a Windows 7 machine, hosting a k guest OS. Before upgrading to WS 10 I was using version 9, and the Win8 guest OS ran without difficulty or error conditions. Since upgrading and installing the most current VMWare Tools inside the guest after upgrading to version 10, there are circumstances where the mouse pointer is not visible; the mouse position appears stuck at a screen location which is not the center of the virtualized display; and mouse click and scrolling events still get processed. Once this begins happening I have to reboot the host machine to get it to stop. (VMWare Tools 9.6.1 build-1378637 is what the WS 10 software installed) The problem seems to correlate with whether the mouse is captured during Win 8.1's bootup process, before control is passed to the login screen. If I explicitly click the mouse into the guest OS and move it slowly around while the system is booting, then I see the mouse after clicking to lift the first screen and expose the password prompt, and there is never a problem within the guest. If I don't do this during bootup, there is no mouse pointer, with the symptoms listed above. I have tried removing and reinstalling VMWare tools, and the other steps published for "mouse problems" from VMWare's chaotic troubleshooting database. The problem persists. Is there a setting in the virtual machine's configuration which could prevent this behavior?

  Read the article

• Manage SQL Server Connectivity through Windows Azure Virtual Machines Remote PowerShell

  - by SQLOS Team

  Manage SQL Server Connectivity through Windows Azure Virtual Machines Remote PowerShell Blog This blog post comes from Khalid Mouss, Senior Program Manager in Microsoft SQL Server. Overview The goal of this blog is to demonstrate how we can automate through PowerShell connecting multiple SQL Server deployments in Windows Azure Virtual Machines. We would configure TCP port that we would open (and close) though Windows firewall from a remote PowerShell session to the Virtual Machine (VM). This will demonstrate how to take the advantage of the remote PowerShell support in Windows Azure Virtual Machines to automate the steps required to connect SQL Server in the same cloud service and in different cloud services.  Scenario 1: VMs connected through the same Cloud Service 2 Virtual machines configured in the same cloud service. Both VMs running different SQL Server instances on them. Both VMs configured with remote PowerShell turned on to be able to run PS and other commands directly into them remotely in order to re-configure them to allow incoming SQL connections from a remote VM or on premise machine(s). Note: RDP (Remote Desktop Protocol) is kept configured in both VMs by default to be able to remote connect to them and check the connections to SQL instances for demo purposes only; but not actually required. Step 1 – Provision VMs and Configure Ports   Provision VM1; named DemoVM1 as follows (see examples screenshots below if using the portal):   Provision VM2 (DemoVM2) with PowerShell Remoting enabled and connected to DemoVM1 above (see examples screenshots below if using the portal): After provisioning of the 2 VMs above, here is the default port configurations for example: Step2 – Verify / Confirm the TCP port used by the database Engine By the default, the port will be configured to be 1433 – this can be changed to a different port number if desired.   1. RDP to each of the VMs created below – this will also ensure the VMs complete SysPrep(ing) and complete configuration 2. Go to SQL Server Configuration Manager -> SQL Server Network Configuration -> Protocols for <SQL instance> -> TCP/IP - > IP Addresses   3. Confirm the port number used by SQL Server Engine; in this case 1433 4. Update from Windows Authentication to Mixed mode   5.       Restart SQL Server service for the change to take effect 6.       Repeat steps 3., 4., and 5. For the second VM: DemoVM2 Step 3 – Remote Powershell to DemoVM1 Enter-PSSession -ComputerName condemo.cloudapp.net -Port 61503 -Credential <username> -UseSSL -SessionOption (New-PSSessionOption -SkipCACheck -SkipCNCheck) Your will then be prompted to enter the password. Step 4 – Open 1433 port in the Windows firewall netsh advfirewall firewall add rule name="DemoVM1Port" dir=in localport=1433 protocol=TCP action=allow Output: netsh advfirewall firewall show rule name=DemoVM1Port Rule Name:                            DemoVM1Port ---------------------------------------------------------------------- Enabled:                              Yes Direction:                            In Profiles:                             Domain,Private,Public Grouping:                             LocalIP:                              Any RemoteIP:                             Any Protocol:                             TCP LocalPort:                            1433 RemotePort:                           Any Edge traversal:                       No Action:                               Allow Ok. Step 5 – Now connect from DemoVM2 to DB instance in DemoVM1 Step 6 – Close port 1433 in the Windows firewall netsh advfirewall firewall delete rule name=DemoVM1Port Output: Deleted 1 rule(s). Ok. netsh advfirewall firewall show  rule name=DemoVM1Port No rules match the specified criteria.   Step 7 – Try to connect from DemoVM2 to DB Instance in DemoVM1  Because port 1433 has been closed (in step 6) in the Windows Firewall in VM1 machine, we can longer connect from VM3 remotely to VM1. Scenario 2: VMs provisioned in different Cloud Services 2 Virtual machines configured in different cloud services. Both VMs running different SQL Server instances on them. Both VMs configured with remote PowerShell turned on to be able to run PS and other commands directly into them remotely in order to re-configure them to allow incoming SQL connections from a remote VM or on on-premise machine(s). Note: RDP (Remote Desktop Protocol) is kept configured in both VMs by default to be able to remote connect to them and check the connections to SQL instances for demo purposes only; but not actually needed. Step 1 – Provision new VM3 Provision VM3; named DemoVM3 as follows (see examples screenshots below if using the portal): After provisioning is complete, here is the default port configurations: Step 2 – Add public port to VM1 connect to from VM3’s DB instance Since VM3 and VM1 are not connected in the same cloud service, we will need to specify the full DNS address while connecting between the machines which includes the public port. We shall add a public port 57000 in this case that is linked to private port 1433 which will be used later to connect to the DB instance. Step 3 – Remote Powershell to DemoVM1 Enter-PSSession -ComputerName condemo.cloudapp.net -Port 61503 -Credential <UserName> -UseSSL -SessionOption (New-PSSessionOption -SkipCACheck -SkipCNCheck) You will then be prompted to enter the password.   Step 4 – Open 1433 port in the Windows firewall netsh advfirewall firewall add rule name="DemoVM1Port" dir=in localport=1433 protocol=TCP action=allow Output: Ok. netsh advfirewall firewall show rule name=DemoVM1Port Rule Name:                            DemoVM1Port ---------------------------------------------------------------------- Enabled:                              Yes Direction:                            In Profiles:                             Domain,Private,Public Grouping:                             LocalIP:                              Any RemoteIP:                             Any Protocol:                             TCP LocalPort:                            1433 RemotePort:                           Any Edge traversal:                       No Action:                               Allow Ok.   Step 5 – Now connect from DemoVM3 to DB instance in DemoVM1 RDP into VM3, launch SSM and Connect to VM1’s DB instance as follows. You must specify the full server name using the DNS address and public port number configured above. Step 6 – Close port 1433 in the Windows firewall netsh advfirewall firewall delete rule name=DemoVM1Port   Output: Deleted 1 rule(s). Ok. netsh advfirewall firewall show  rule name=DemoVM1Port No rules match the specified criteria.  Step 7 – Try to connect from DemoVM2 to DB Instance in DemoVM1  Because port 1433 has been closed (in step 6) in the Windows Firewall in VM1 machine, we can no longer connect from VM3 remotely to VM1. Conclusion Through the new support for remote PowerShell in Windows Azure Virtual Machines, one can script and automate many Virtual Machine and SQL management tasks. In this blog, we have demonstrated, how to start a remote PowerShell session, re-configure Virtual Machine firewall to allow (or disallow) SQL Server connections. References SQL Server in Windows Azure Virtual Machines   Originally posted at http://blogs.msdn.com/b/sqlosteam/

  Read the article

• Hyper-V virtual machine can't be migrated to a specific host in the cluster

  - by Massimo

  I have a three-node Hyper-V cluster running on Windows Server 2008 R2 which is working quite flawlessly: there are no errors, live migration works, all hosts can and will happily run all virtual machines, and so on. But one specific virtual machinee is trying to make me go mad: it works on two nodes of the cluster, but not on the third one. Whenever I try to move the VM to that node, be it in a live migration or with the VM powered off, it always fails. In the event log of the host these events are logged: Source: Hyper-V-VMMS Event ID: 16300 Cannot load a virtual machine configuration: General access denied error (0x80070005) (Virtual machine ID <GUID>) Source: Hyper-V-VMMS Evend ID: 20100 The Virtual Machine Management Service failed to register the configuration for the virtual machine '<GUID>' at 'C:\ClusterStorage\<PATH>\<VM>': General access denied error (0x80070005) Source: Hyper-V-High-Availability Event ID: 21102 'Virtual Machine Configuration <VM>' failed to register the virtual machine with the virtual machine management service. All other VMs can be moved to/from the offending host, and the offending VM can be moved between the other two hosts. Also, this is not a storage problem, because there are other VMs in the same cluster volume, and the host has no troubles running them. What's going on here?

  Read the article

• Permission denied when running Rails app in VirtualBox Ubuntu guest with files on Windows host

  - by Ola Tuvesson

  I think I'm close to having my dev environment set up exactly the way I want, but one final snag remains. I'm running VirtualBox on a Windows 7 64bit host, with my dev enviroment inside a Ubuntu 12.04 guest. I want to keep the files for my projects on the host filesystem - partly so I can access them when the Ubuntu guest is not running, but also so I can use Tortoise and other Windows based tools (cough Photoshop), and it also eases my backup scheme somewhat. So I've got a folder "Rails" on my NTFS drive, which I've shared (Samba) from the host with a user specifically created for the Ubuntu guest. The mount point has been set up and an entry added to fstab (cifs), using a credentials file and the options iocharset=utf8,mode=0777,dir_mode=07??77 This mounts fine and my Ubuntu user has both read and write permissions to the contents. But when I try to start my Rails app I get permission errors on any files the app needs to write to (e.g. the log file) - why is that? Are there any major conceptual flaws with this approach? Would I be better off using the VBox "shared folders" function?

  Read the article

• Huge host CPU usage in idle vmware guest. Ubuntu 10.04 host, Vista SP2 guest

  - by themesandmodules

  I'm experiencing huge host CPU usage with an idle vmware guest. Host: Ubuntu 10.04 32-bit 2.6.32-24-generic-pae. (Very new install, i.e 24 hours ago) Hardware is Dell XPS M1530 laptop, 4GB ram. Intel Core II Duo T9300 2.50Ghz The virtualization setting "VT" or something is enabled in my bios. Guest: Completely fresh install of Windows Vista, upgraded to latest SP2 and all windows updates installed. 1024 - 1512MB ram allocated. Absolutely no other software installed on it, apart from VMWare tools. Situation When the guest is doing absolutely nothing, I watch with sysinternals process watch on the guest. This shows that system idle process is between 70 and 99%, usually around 95%. No actual process doing anything. On the host, I watch with top, I get cpu usage of 20% - 80%, usually around 30%. What I have tried Single and Dual processor available to guest - no change. Turn off all peripherals to guest - no network, drives, usb etc - no change. Turn off 3d acceleration for guest - perhaps a small improvement, or no change. Upping allocated ram to guest from 1024MB to 1512MB - no change. Yelling at vmware - no change. I have experienced a similar issue in the past, which was solved by setting the guest to have 1 CPU. This time that hasn't worked.

  Read the article

• Very slow browsing shared folder XP client/host

  - by Ickster

  I have a pretty straightforward setup where I'm storing media files on an XP pro machine, and sharing the folder to be accessed by other XP pro machines around the house. (Typically, there's only one client accessing the share at a time, although there may be several with the share mounted.) It's been working just fine for years, but I've recently started having some problems. A couple of days ago, the host PC had power disconnected while it was running. It was restarted and everything seemed fine initially, but since then browsing the shared folder from client machines has been extremely slow and actually reading data is all but impossible. The problem exists in every access method I've tried: Windows Explorer, VLC dialogs, command line, etc. My first thought was that the disk was experiencing problems, but there are no problems viewing the files locally on the host machine. My second thought was that there was a network problem on the host machine, so I removed and reinstalled drivers for the NIC with no change. My third thought was that there might've been a problem elsewhere on the network, so I swapped out hardware to no avail. I'm regrouping and trying to come up with a methodical approach to figuring out what might be wrong. I would of course be thrilled if you can suggest specific problems (Microsoft KB articles, etc.) that I might check, but I'm not expecting a silver bullet. If you can help me outline an approach to identify the problem (including recommended tools, e.g., disk checkers, network analyzers, etc.) I'd greatly appreciate it.

  Read the article

• My client's solution of a Windows SBS 2011 VM on an Ubuntu host and VirtualBox is pinning the host CPU

  - by Scott Stamp

  Here's my situation, I've got a client hosting two servers (one VM), with the host providing VMware Zimbra, the other Windows Small Business Server 2011. Unfortunately, the person before me had configured this setup as follows. Host: Ubuntu Desktop Edition 10.04 (I know, again, not my choice) running VMware Zimbra 8GB of RAM On-board RAID1 of two 320GB Seagate Barracuda drives for the OS Software RAID5 of four 500GB WD Caviar Black drives on MDADM for bulk storage (sorry, I don't know the model #) A relatively competent quad-core Intel Core i7 CPU from the Nehalem architecture (not suspicious of this as the bottleneck) Guest: Windows Small Business Server 2011 4GB of RAM Host-equivalent CPU allocation VDI file for OS hosted on the on-board RAID, VDI file for storage hosted on the on-board RAID For some reason when running, the VM locks up when sitting nearly idle, and the VirtualBox process reports values of 240%+ in top (how is that even possible?!). Anyone have any ideas or suggestions? I'm totally stumped on this one. Happy to provide whatever logs you'd like to take a look at. Ideally I'd drop VirtualBox and provision this with VMware Workstation, but the client has objected to the (very nominal) costs involved. If hardware needs to be purchased to help, it will be, but we're considering upgrades a last-resort at this time. Thanks in advance! *fingers crossed*

  Read the article

• Host multiple domains with Apache on a VPS

  - by Kunal

  Hi I have recently bought a windows VPS and installed apache, mysql using xampp. All services are running fine. I can access the hosted site using the IP of VPS but what I need to do is host multiple domains on that server. Actually my requirement was to use htaccess on a php based site but the site had to access data from ms sql server as well. So needed to enable php_mssql.dll in the php.ini which no shared hosting was supporting. Had to go for this VPS. Plesk was installed by default but as htaccess wont work with IIS, I had to stop IIS service and install apache there. Now all is well, but I need to find a way to host multiple domains there. When I bought the VPS they hosting people sent me the dedicated IP of the server and also I have the 2 name servers required to host domains. What is the next step? Exactly which file I need to modify to get things done? Please help! Any kind of help is much appreciated. Thanks in advance for all of your kind help and time.

  Read the article

• Open Your Windows - 4/Maio/10

  - by Claudia Costa

  This FREE technical briefing is designed to show ISVs/SIs how to leverage the Oracle11g Technology especially in the small to medium business. The briefing focuses on Oracle's 11g platform on Windows & Linux and gives a very comprehensive technical competitive overview to the products offered by Microsoft. The technical part covers Integration and Migration aspects of various Microsoft products such as SQL Server, .NET and Active Directory. Register Today! With Oracle11g Oracle introduced various products (ApplicationExpress, OracleExpress Edition, ADF, BPEL) and licenses (Oracle Database Standard Edition One, Application Server Java Edition) specifically targetting the small to medium business market and to show that Oracle Database and Application Server are as easy to use and costs less than Microsoft products in terms of purchase price and ongoing support & maintenance and even much much less when considering the Linux platform.. For those ISVs have already adopted Microsoft .NET framework and using SQL Server as their database layer, we will demostrate that Oracle11g Database is as easy as SQL Server to install, configure, and manage. In addition to that, their application development .NET platform does not requires dramatic changes to enable it to run on the Oracle database. Besides the standard functionalities, Oracle has enhanced some of the advanced features; such as Intermedia, Security, Ref Cursor, etc., tightly integrated with .NET framework so that .NET developers can take full advantage of the Oracle technology, without worrying or programming the complexity components. Objectives ·         Understand Oracle's strategy and commitment on Windows & Linux ·         Learn how to migrate from SQL Server to Oracle on Windows AND Linux ·         Understand that Oracle11g is easy to manage and to install on Windows & Linux ·         Learn how to integrate Windows products with the Oracle11g Platform ·         Learn how Oracle products interoperate & integrate with Microsoft .NET ·         Learn how an Oracle database on Windows will easily be ported to a lower cost Linux database platform and interoperate with a .NET application Prerequisites General Operating System expertise including MS-Windows and Linux. Agenda ·         Welcome and Intro ·         Oracle at a glance ·         Strategy; Small to Medium Business, Microsoft and Linux ·         Oracle 11g Architecture on Linux & Windows ·         Managing Oracle 11g on Linux & Windows ·         Application Development ·         Migration ·         Value propositions for ISVs & Wrap-up   ---------------------------------------------------------------------------- Para mais informações/inscrições, contacte: [email protected].

  Read the article

• How To Delete Built-in Windows 7 Power Plans (and Why You Probably Shouldn’t)

  - by The Geek

  Do you actually use the Windows 7 power management features? If so, have you ever wanted to just delete one of the built-in power plans? Here’s how you can do so, and why you probably should leave it alone. Just in case you’re new to the party, we’re talking about the power plans that you see when you click on the battery/plug icon in the system tray. The problem is that one of the built-in plans always shows up there, even if you only use custom plans. When you go to “More power options” on the menu there, you’ll be taken to a list of them, but you’ll be unable to get rid of any of the built-in ones, even if you have your own. You can actually delete the power plans, but it will probably cause problems, so we highly recommend against it. If you still want to proceed, keep reading. Delete Built-in Power Plans in Windows 7 Open up an Administrator mod command prompt by right-clicking on the command prompt and choosing “Run as Administrator”, then type in the following command, which will show you a whole list of the plans. powercfg list Do you see that really long GUID code in the middle of each listing? That’s what we’re going to need for the next step. To make it easier, we’ll provide the codes here, just in case you don’t know how to copy to the clipboard from the command prompt. Power Scheme GUID: 381b4222-f694-41f0-9685-ff5bb260df2e  (Balanced) Power Scheme GUID: 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c  (High performance)Power Scheme GUID: a1841308-3541-4fab-bc81-f71556f20b4a  (Power saver) Before you do any deleting, what you’re going to want to do is export the plan to a file using the –export parameter. For some unknown reason, I used the .xml extension when I did this, though the file isn’t in XML format. Moving on… here’s the syntax of the command: powercfg –export balanced.xml 381b4222-f694-41f0-9685-ff5bb260df2e This will export the Balanced plan to the file balanced.xml. And now, we can delete the plan by using the –delete parameter, and the same GUID.  powercfg –delete 381b4222-f694-41f0-9685-ff5bb260df2e If you want to import the plan again, you can use the -import parameter, though it has one weirdness—you have to specify the full path to the file, like this: powercfg –import c:\balanced.xml Using what you’ve learned, you can export each of the plans to a file, and then delete the ones you want to delete. Why Shouldn’t You Do This? Very simple. Stuff will break. On my test machine, for example, I removed all of the built-in plans, and then imported them all back in, but I’m still getting this error anytime I try to access the panel to choose what the power buttons do: There’s a lot more error messages, but I’m not going to waste your time with all of them. So if you want to delete the plans, do so at your own peril. At least you’ve been warned! Similar Articles Productive Geek Tips Learning Windows 7: Manage Power SettingsCreate a Shortcut or Hotkey to Switch Power PlansDisable Power Management on Windows 7 or VistaChange the Windows 7 or Vista Power Buttons to Shut Down/Sleep/HibernateDisable Windows Vista’s Built-in CD/DVD Burning Features TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

  Read the article

• Windows Azure Emulators On Your Desktop

  - by BuckWoody

  Many people feel they have to set up a full Azure subscription online to try out and develop on Windows Azure. But you don’t have to do that right away. In fact, you can download the Windows Azure Compute Emulator – a “cloud development environment” – right on your desktop. No, it’s not for production use, and no, you won’t have other people using your system as a cloud provider, and yes, there are some differences with Production Windows Azure, but you’ll be able code, run, test, diagnose, watch, change and configure code without having any connection to the Internet at all. The best thing about this approach is that when you are ready to deploy the code you’ve been testing, a few clicks deploys it to your subscription when you make one.   So what deep-magic does it take to run such a thing right on your laptop or even a Virtual PC? Well, it’s actually not all that difficult. You simply download and install the Windows Azure SDK (you can even get a free version of Visual Studio for it to run on – you’re welcome) from here: http://msdn.microsoft.com/en-us/windowsazure/cc974146.aspx   This SDK will also install the Windows Azure Compute Emulator and the Windows Azure Storage Emulator – and then you’re all set. Right-click the icon for Visual Studio and select “Run as Administrator”:    Now open a new “Cloud” type of project:   Add your Web and Worker Roles that you want to code:   And when you’re done with your design, press F5 to start the desktop version of Azure:   Want to learn more about what’s happening underneath? Right-click the tray icon with the Azure logo, and select the two emulators to see what they are doing:          In the configuration files, you’ll see a “Use Development Storage” setting. You can call the BLOB, Table or Queue storage and it will all run on your desktop. When you’re ready to deploy everything to Windows Azure, you simply change the configuration settings and add the storage keys and so on that you need.   Want to learn more about all this?   Overview of the Windows Azure Compute Emulator: http://msdn.microsoft.com/en-us/library/gg432968.aspx Overview of the Windows Azure Storage Emulator: http://msdn.microsoft.com/en-us/library/gg432983.aspx January 2011 Training Kit: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=413E88F8-5966-4A83-B309-53B7B77EDF78&displaylang=en      

  Read the article

• Improve Playback Using Enhancements in Windows Media Player 12

  - by DigitalGeekery

  Are you looking for ways to improve the playback of your media in Windows Media Player 12? We’ll show you how to do that by using the enhancements in WMP 12. If you are in Library mode, you’ll need to click the icon at the lower right to switch to Now Playing mode. Right-click anywhere in Media Player while in Now Playing mode, select Enhancements, and select any of the available options.   You can switch between the individual enhancements by clicking the right and left buttons at the top left.   Crossfading and Auto Volume Leveling The Auto Volume Leveling setting is just a simple toggle on and off. If your MP3 or WMA files have volume leveling information values.   You can automatically add volume leveling information values to all files you add to your library by switching to Library view, going to Tools > Options, and selecting Add volume leveling information values for new files on the Library tab. Click OK when finished.   Crossfading will gradually decrease the volume of the song that is ending (fade out) and increase volume of the song that is beginning. Click Turn on Crossfading and then click and drag the slider left or right change the amount of overlap between tracks. Graphic Equalizer The graphic equalizer is toggled on and off by clicking Turn on / Turn off at the top left. You can select pre-defined equalizer settings by music genre by clicking the Default list. The radio buttons on the left allow you to move the sliders individually, in a loose group or a tight group. You can always return to the default settings by clicking Reset. Play Speed Settings Choose a pre-defined settings by clicking Slow, Normal, or Fast. Uncheck the Snap slider to common speeds the move the slider right and left to your desired speed. If nothing else, these settings provide a little fun and amusement. Quiet Mode Quiet mode will level out any sharp volume highs and lows within a single track. Simply toggle the setting on or off and select whether you prefer Medium difference or Little difference by selecting one of the radio buttons. SRS WOW effects SRS WOW effects enhance low-frequency and stereo sound performance. Click Turn on to enable the TruBass and WOW Effect sliders. You can also optimize for your speaker type. Click to switch between Regular, Large, and Headphones. Video Settings Video Settings allow you to adjust the Hue, Brightness, Saturation, and Contrast.   You can also adjust the zoom settings by clicking Select video zoom settings.   Dolby Digital Settings Choose between Normal, Night, and Theater settings to adjust the audio for Dolby Digital content. This setting will only effect media with Dolby Digital sound. Looking for more ways to improve your media experience in WMP 12? Check out how to update metadata and cover art and how to share media with other Windows 7 computers on your home network. Similar Articles Productive Geek Tips Fixing When Windows Media Player Library Won’t Let You Add FilesInstall and Use the VLC Media Player on Ubuntu LinuxHow To Rip a Music CD in Windows 7 Media CenterStream Media from Windows 7 to XP with VLC Media PlayerInstalling Windows Media Player Plugin for Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor

  Read the article

• Windows Azure Emulators On Your Desktop

  - by BuckWoody

  Many people feel they have to set up a full Azure subscription online to try out and develop on Windows Azure. But you don’t have to do that right away. In fact, you can download the Windows Azure Compute Emulator – a “cloud development environment” – right on your desktop. No, it’s not for production use, and no, you won’t have other people using your system as a cloud provider, and yes, there are some differences with Production Windows Azure, but you’ll be able code, run, test, diagnose, watch, change and configure code without having any connection to the Internet at all. The best thing about this approach is that when you are ready to deploy the code you’ve been testing, a few clicks deploys it to your subscription when you make one.   So what deep-magic does it take to run such a thing right on your laptop or even a Virtual PC? Well, it’s actually not all that difficult. You simply download and install the Windows Azure SDK (you can even get a free version of Visual Studio for it to run on – you’re welcome) from here: http://msdn.microsoft.com/en-us/windowsazure/cc974146.aspx   This SDK will also install the Windows Azure Compute Emulator and the Windows Azure Storage Emulator – and then you’re all set. Right-click the icon for Visual Studio and select “Run as Administrator”:    Now open a new “Cloud” type of project:   Add your Web and Worker Roles that you want to code:   And when you’re done with your design, press F5 to start the desktop version of Azure:   Want to learn more about what’s happening underneath? Right-click the tray icon with the Azure logo, and select the two emulators to see what they are doing:          In the configuration files, you’ll see a “Use Development Storage” setting. You can call the BLOB, Table or Queue storage and it will all run on your desktop. When you’re ready to deploy everything to Windows Azure, you simply change the configuration settings and add the storage keys and so on that you need.   Want to learn more about all this?   Overview of the Windows Azure Compute Emulator: http://msdn.microsoft.com/en-us/library/gg432968.aspx Overview of the Windows Azure Storage Emulator: http://msdn.microsoft.com/en-us/library/gg432983.aspx January 2011 Training Kit: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=413E88F8-5966-4A83-B309-53B7B77EDF78&displaylang=en      

  Read the article

• RRAS on Windows Server 2012 box

  - by TerminalTox1n

  I'm trying to add the RRAS VPN roles into my server 2012 box. The error I am getting is: install-windowsfeature : The request to add or remove features on the specified server failed. Installation of one or more roles, role services, or features failed. One or several parent features are disabled so current feature can not be enabled. Error: 0xc004000d At line:1 char:1 + install-windowsfeature -name directaccess-vpn + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature], Exception + FullyQualifiedErrorId : DISMAPI_Error__Failed_To_Enable_Updates,Microsoft.Windows.ServerManager.Commands.AddWind owsFeatureCommand This box is running as a domain controller. Does anybody have any insight on having server 2012 running a domain controller and VPN endpoint on the same box? Thanks!

  Read the article

• Spikes of 99% disk activity in Windows 8 Task Manager

  - by Jonathan Chan

  For some reason Windows 8's Task Manager reports spikes of 99% disk activity for hours at a time. Looking at the entries in that column, however, data doesn't seem to be getting written any more quickly than when the disk activity is around 25-50% (which it seem to idle at most of the time). Furthermore, when these 99% disk activity spikes are happening, the average response time reported in the Performance tab becomes 4000-6000ms. Is there a good way to find out what is causing the disk activity? I've tried using Process Explorer, but I said above, the rate at which data is reportedly being written doesn't seem to correspond (Dropbox and Google Chrome are constantly the top two, but the spikes are not dependent on their being open). Thanks in advance for any help. It gets very annoying when the computer stutters to a halt.

  Read the article

• Windows update doesn't list update details, only the number of updates

  - by leodip

  Hi all, My system is Vista Business 32 bits SP2. When I click "Windows update", I can see there are 2 available optional updates. If I click the link "2 optional updates are available" to see what the updates are, I get: http://leodip.s3.amazonaws.com/windows%5Fupdate2.PNG The details about the updates are EMPTY. Any idea why this is happening? It doesn't happen only with optional updates, but with critical updates as well. I would like to fix this, so I can see what the updates are. Thanks!

  Read the article

• Windows Update when Group Policy Forbids

  - by David Beckman

  I am in the administrators group for my local Windows XP machine and I would like to get updates via http://update.microsoft.com/[1]. However, this is prevented via the group policy: Network policy settings prevent you from using this website to get updates for your computer. Is there anyway to override this specific policy for my machine or my user? [1] Several installed applications are Microsoft based, but are not part of the machine standard (eg Visual studio). As such, I am not getting the updates for these applications. I could periodically go to the various application sites and look for hotfixes, but that is beyond tedious.

  Read the article

• Enabling media streaming from a removable drive using Windows Media Player

  - by Simon Hartcher

  I have Windows Media Player set up to stream video to several devices in my apartment. I had recently run out of space so I purchased an external drive to store my videos/music etc. I can add the media to my WMP library and play it locally without issue. As soon as I try to access the media from another device that supports media streaming (Media player or another PC) only the media stored on a fixed drive is available. Is there a way to enable media sharing from a removable drive or somehow trick WMP that the media is stored on a fixed drive? I tried setting up a SymLink linking a directory on the fixed drive to the removable one but with the same result.

  Read the article

• Unexpected server restart - Windows 2003 SP2 fully patched

  - by PCTech

  I'm having problems with a server that has been restarting itself randomly for the past 3 months. The server is windows 2003 with SP2 Domain Controller and it is fully patched. I have seen the following errors in event log: Source: USER32 Category: None Type: Information Event ID: 1074 User: Domain\Administrator The process winlogon.exe has initiated the restart of computer (server name) on behalf of user domainname\Administrator for the following reason: No title for this reason could be found Reason Code: 0x840000ff Shutdown Type: restart I have ran out of ideas as to what might be causing this issue. The system is clean and not infected. There are no scheduled tasks responsible for the restart either. I'm considering moving the backup (Backup Exec 12.5) to a different server but I'm almost certain that this is not the issue as the restart times vary and do not match the scheduled backup jobs. Any suggestions to help me resolve this issue would be appreciated, thanks.

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >