Search Results

Search found 24931 results on 998 pages for 'information visualization'.

Page 894/998 | < Previous Page | 890 891 892 893 894 895 896 897 898 899 900 901  | Next Page >

• Ubuntu box static routing problem

  - by Rafael

  Hello, I'm trying to configure a ubuntu server to be a router. This is my interface configuration (eth2 connects to my WAN, eth0 to my LAN): auto eth2 iface eth2 inet static address 192.168.0.249 netmask 255.255.255.0 gateway 192.168.0.1 broadcast 192.168.0.255 auto eth0 iface eth0 inet static address 192.168.100.1 netmask 255.255.255.0 This is the router information: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth2 And this is dhcp configuration: subnet 192.168.100.0 netmask 255.255.255.0 { range 192.168.100.101 192.168.100.254; option domain-name-servers 201.70.86.133; option routers 192.168.100.1; authoritative; } I'm then connecting a mac os x by cable on eth0. This is en0 interface configuration: en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:26:bb:5d:82:b0 inet6 fe80::226:bbff:fe5d:82b0%en0 prefixlen 64 scopeid 0x4 inet 192.168.100.101 netmask 0xffffff00 broadcast 192.168.100.255 media: autoselect (100baseTX <full-duplex>) status: active And this is the routing table: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.100.1 UGSc 139 32 en0 10.37.129/24 link#8 UC 2 0 vnic1 10.37.129.2 0:1c:42:0:0:9 UHLWI 0 839 lo0 10.37.129.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vnic1 10.211.55/24 link#7 UC 2 0 vnic0 10.211.55.2 0:1c:42:0:0:8 UHLWI 0 840 lo0 10.211.55.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vnic0 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 3 507924 lo0 169.254 link#4 UCS 0 0 en0 172.16.42/24 link#10 UC 2 0 vmnet8 172.16.42.1 0:50:56:c0:0:8 UHLWI 0 839 lo0 172.16.42.255 link#10 UHLWbI 1 24 vmnet8 192.168.100 link#4 UC 2 0 en0 192.168.100.1 0:e0:7c:7e:f:99 UHLWI 139 0 en0 777 192.168.100.101 127.0.0.1 UHS 0 0 lo0 192.168.100.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 en0 192.168.116 link#9 UC 2 0 vmnet1 192.168.116.1 0:50:56:c0:0:1 UHLWI 0 839 lo0 192.168.116.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vmnet1 When I ping 192.168.100.1, it works. When I ping 192.168.0.249, it also works. However, when I try to ping 192.168.0.1 it does not. Does anyone has any way to solve this? Is there a way to debug it? Thanks,

  Read the article

• Blank displays after inactivity, mouse cursor not showing up

  - by Mike Christiansen

  I have a Windows 7 Enterprise x86 machine that is exhibiting some strange problems. After some inactivity (it varies how long it takes), when I come back to my computer, both of my monitors are black. The monitors are on, with a black display. Moving the mouse and pressing keys on the keyboard do not work. This happens at least once a day. When I first encountered the issue, I performed a hard shutdown and restarted the computer. About 10% of the time when I did this, the resolutions on my monitors were messed up. The native resolution on the primary monitor is 1600x900, and the native on my secondary is 1440x900. None of the widescreen resolutions would be present in the display properties. I had 800x600, 1024x768, and 1280x1024. As a workaround to this issue, I've found that if I plug in my secondary monitor as the primary monitor, and leave the secondary unplugged, then Windows will start in 1024x768 on the secondary. Then, I can use Windows 7's "Detect" feature and it finds the 1440x900 resolution, and sets it. Then I have to connect the primary monitor to the secondary port and set it as the primary. Then I can switch the two cables, putting the primary into the primary, the secondary into the secondary. Then use the "Detect" feature again, and it finds the correct resolutions. Some time after performing the above, I discovered that when the screens were blanked, I could simply press "Control+Alt+Delete", type in my password, and everything comes up fine - except my mouse cursor. All applications and features work as intended, except there is no mouse cursor (the mouse actually works though...). I have the "Show location of pointer when I press CTRL key" option selected, so I can press CTRL and use my mouse as normal - but I have no actual cursor. When the computer is in this state, UAC is also not functional. Whenever a UAC prompt appears, the screens go black (the original symptoms) and I have to press Escape to exit UAC. Because of the above symptoms (the UAC black screen thing, etc) I beleive winlogon.exe may be the culprit. However, I have no idea how to fix it. I am unable to restart winlogon.exe due to the problems I am having with winlogon.exe (the UAC black screen) Looking for any ideas.... More information Windows 7 x86 Enterprise Domain environment (I have a secondary account with administrator rights) Dell Optiplex 960 Cannot perform "optional" windows updates due to an activation issue (I am testing a windows 7 image, and an activation infrastructure has not been created yet. However, this issue was happening before I was unable to perform windows update, and windows was up to date at the time Updated video card driver (as an attempt to fixing the resolution issue) Disabled all power saving options Please let me know what else you need to help me solve this issue! Thanks in advance, Mike

  Read the article

• T60 Screen/LCD gets black after some minutes with a highpitched sound rising and fading

  - by Edward De Leau

  Just now my T60 screen got "black" (so no display). On my second monitor: no problems so the vga output works. symptom: Screen blanks / no display but works on second monitor steps to reproduce: - boot - wait (it does not matter what you do you do not have to login or anything) - (now the monitor of the laptop slowly begins to make a ssssssssHHHHHHHHHHHHHHHHHWOEOEssssssss noice of about 10 seconds) - right after the sounds ends the monitor gets black times seem to be the same each time. software: installed no new software before/after, running zone alarm and antivirus. other: it does not feel hot in any place, there dont seem to be running processes with strange behaviour. warranty: out of warranty what was i doing: typing text on a website and doing some php coding in a text editor. Anyone any idea what I can do here other than buy a new laptop? / does it sound familiar to known cases? update: * exactly the same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-Screen-Blackout/m-p/288772 and the second poster (garyj) here: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/Black-Screen-on-T60/m-p/235053#M48627 and here: "i have that same problem. i replaced the CCRL on mine and it works fine when the screen is not screwed in. once the frame of the LCD screen (metal portion) touches the metal on the laptop which holds the screen the screen goes black. If the metal is touching the screen when you boot up it boots up with it being very dimmly lit. " from http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-screen-problems/m-p/205047#M44995 (it seems replacing the lcd is no use, he tried it 3 times). same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-black-screen/m-p/80604#M25914 Hmmm... not handy 3 or 4 months ago I ordered and installed a new fan. Now the LCD. Which does not seem the core isse but some electric issue so it seems replacing the LCD is not the thing todo here. I have the following question: If it is not the LCD that needs to be replaced (see other threads) which parts can I order to fix this? Has anyone got any information which could lead me to identify the issue? I have read replacing the "inverter" AND the "backlightning" would that make sense?

  Read the article

• networking tunnel adapter connections?

  - by Karthik Balaguru

  I understand that Tunnel Adapter LAN is for encapsulating IPv6 packets with an IPv4 header so that they can be sent across an IPv4 network. Few queries popped up in my mind based on this :- If i do 'ipconfig', Apart from ethernet adapter LAN details, I get a series of statments as below - Tunnel adapter Local Area Connection* 6 Tunnel adapter Local Area Connection* 7 Tunnel adapter Local Area Connection* 12 Tunnel adapter Local Area Connection* 13 Tunnel adapter Local Area Connection* 14 Tunnel adapter Local Area Connection* 15 Tunnel adapter Local Area Connection* 16 Except for the *16, all the other Tunnel Adapter Local Area Connections show Media Disconnected. Why is the numbering for the Tunnel adapter LAN not sequential? It is like 6, 7, 12, 13, 14, 15, 16. A strange numbering scheme! I tried to figure it out by thinking of some arithmetic series. But, it does not seem to fit in. There is a huge gap between 7 and 12. Any ideas? What is the need for so many Tunnel Adapter LAN connections? Can you tell me a scenario that requires all of those ? I did ipconfig /all to get more information. From the listing, I understand that: 16, 15, 14, 12 are Microsoft 6to4 Adapters 13, 6 are isatap Adapters 7 is Teredo Tunneling Pseudo-interface I understand that the above are for automatic tunneling so that the tunnel endpoints are determined automatically by the routing infrastructure. 6to4 is recommended by RFC3056 for automatic tunneling that uses protocol 41 for encapsulation. It is typically used when an end-user wants to connect to the IPv6 Internet using their existing IPv4 connection. Teredo is an automatic tunneling technique that uses UDP encapsulation across multiple NATs. That is, It is to grant IPv6 connectivity to nodes that are located behind IPv6-unaware NAT devices ISATAP treats the IPv4 network as a virtual IPv6 local link, with mappings from each IPv4 address to a link-local IPv6 address. That is to transmit IPv6 packets between dual-stack nodes on top of an IPv4 network. That is, to put in simple words, ISATAP is an intra-site mechanism, while the 6to4 and Teredo are for inter-site tunnelling mechanisms. It seems that Teredo should alone enabled by default in Vista, But my system does not show it to be enabled by default. Interestingly, it shows a 6to4 tunnel adapter (Tunnel adapter LAN connection 16) to be enabled by default? Any specific reasons for it? If i do ipconfig /all, why is only one Teredo present while four 6to4 are present ? I searched the internet for answers to the above queries, but I am unable to find clear answers.

  Read the article

• How do I get the latest FastCGI and PHP versions to peacefully coexist on IIS 6?

  - by BHelman

  I have been going round and round trying to get any sort of PHP running on IIS 6. I somehow managed to successfully get version 5.1.4 running using the php5isapi.dll file. However, I want to upgrade a website to begin using a Content Management System. I have never dug into CMS before so I'm open to programs that are easy to use. I am currently looking into TomatoCMS and ImpressCMS - but that's beside the point. I have never done an installation with PHP before and I think I'm getting familiar with how it works. However the current situation is this. Microsoft's Web Platform Installer 2.0 installed FastCGI for me. I need to upgrade to PHP 5.3.1 for a CMS system. So I downloaded the Windows installer and let it go at it. After consulting several other blog articles, I believe I know how it is supposed to work but I am currently not having luck. THE SETUP *.php is a registered extension in IIS 6 for all websites (on Win 2k3). The application that it calls is C:\Windows\system32\inetsvr\fcgiext.dll, like it should. The fcgiext.ini config has the proper lines: [Types] php=PHP [PHP] ext=C:\program files\PHP\php-cgi.exe And the php.ini file also has the correct configs. All extensions are disabled and I changed the correct things for FastCGI. And everything is registered correctly with the PATH variable. Everything is exactly how it should be. BUT when I launch the "info.php" page () on another computer, I get the following error: FastCGI Error The FastCGI Handler was unable to process the request. Error Details: * Section [PHP] not found in config file. * Error Number: 1413 (0x80070585). * Error Description: Invalid index. HTTP Error 500 - Server Error. Internet Information Services (IIS) A quick Google search reveals that I have it all setup correctly as far as the INI's go and the mapping of the php extension. I am completely at a loss. Does anyone have any suggestions? Although the server is hosting three small websites, I don't really care what I have to do to it to get it to work.

  Read the article

• HP MSR 30-10a Router - Route Traffic over Default Route

  - by SteadH

  We have a brand new HP MSR 30-10a Router. We have a fairly simple routing situation - we have two IP blocks, one which has a route out. We need things on the first block to go through the router, and out. I have an old Cisco 2801 router doing the job right now. For our example - IP Block 1: 50.203.110.232/29, Router interface on this block is 50.203.110.237, route out is 50.203.110.233. IP Block 2: 50.202.219.1/27, Router interface on this block at 50.202.219.20. I have a static route created for: 0.0.0.0 0.0.0.0 50.203.110.233 The router seems to understand this. When on the CLI via serial cable, I can ping 8.8.8.8 and hear responses from Google DNS. Woo hoo! The issue arrives when any client sits on the IP Block 2 side. I configured my client with a static IP of 50.202.219.15/27, default gateway 50.202.219.20. I can ping myself. I can ping the near side of the router (50.202.219.20), and I can ping the far side of the router (50.203.110.237. I cannot ping anything else in IP block 1, nor can I ping 8.8.8.8. Here is my configuration file: <HP>display current-configuration # version 5.20.106, Release 2507, Standard # sysname HP # domain default enable system # dar p2p signature-file flash:/p2p_default.mtd # port-security enable # undo ip http enable # password-recovery enable # vlan 1 # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher $c$3$40gC1cxf/wIJNa1ufFPJsjKAof+QP5aV authorization-attribute level 3 service-type telnet # cwmp undo cwmp enable # interface Aux0 async mode flow link-protocol ppp # interface Cellular0/0 async mode protocol link-protocol ppp # interface Ethernet0/0 port link-mode route ip address 50.203.110.237 255.255.255.248 # interface Ethernet0/1 port link-mode route ip address 50.202.219.20 255.255.255.224 # interface NULL0 # ip route-static 0.0.0.0 0.0.0.0 50.203.110.233 permanent # load xml-configuration # load tr069-configuration # user-interface tty 12 user-interface aux 0 user-interface vty 0 4 authentication-mode scheme # My guess right now is there is some sort of "permission" needed to use the default route. The manuals haven't turned up a lot in this area that don't make the situation much more complicated (but maybe it needs to be more complicated?) Background: we use HP switches, and I love the CLI. I bought HP thinking the command line interface would be similar, or at least speak the same language. Whoops! I'd be happy to provide more information or perform any additional tests. Thanks in advance! Update 1: The manual mentions routing rules. I hadn't previously added these (since our Cisco 2801 seems to route anything by default). I added: ip ip-prefix 1 permit 0.0.0.0 0 less-equal 32 alas, still no dice.

  Read the article

• Permission denied install Joomla CiviCRM

  - by Tim

  Dear All, I am trying to install CiviCRM on a Joomla 1.5.17 web server running Ubuntu 9.10. Uploading the package to the tmp directory in /var/www/[site name]/tmp and installing creates this error: Warning: fopen(/var/www/trbcp/administrator/components/com_civicrm/civicrm/templates/CRM/common/civicrm.settings.php.tpl) [function.fopen]: failed to open stream: Permission denied in /var/www/trbcp/libraries/joomla/filesystem/file.php on line 240 Warning: fopen(/var/www/trbcp/administrator/components/com_civicrm/civicrm/templates/CRM/common/civicrm.settings.php.tpl) [function.fopen]: failed to open stream: Permission denied in /var/www/trbcp/libraries/joomla/filesystem/file.php on line 240 Warning: include_once(/var/www/trbcp/administrator/components/com_civicrm/civicrm.settings.php) [function.include-once]: failed to open stream: Permission denied in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 115 Warning: include_once() [function.include]: Failed opening '/var/www/trbcp/administrator/components/com_civicrm/civicrm.settings.php' for inclusion (include_path='.') in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 115 Warning: require_once(DB.php) [function.require-once]: failed to open stream: No such file or directory in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 140 Fatal error: require_once() [function.require]: Failed opening required 'DB.php' (include_path='.') in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 140 Initially I got a permissions denied error and thought that Joomla did not have permissions to all its directories but looking at Help-System information all the necessary directories are writable. I then decided to chmod 777 all the directories and try again but it still fails. Looking at the directories afterwards it seems that the new directories being created are not being created 777. By changing them I can get at least one step further before the error appears again. My question is does anyone know how to get round this? I am thinking that the new directories being created will require sudo privileges to have mv and create actions carried out, hence the permission denied errors. Can this be configured in Joomla? Or is there a way to specify that new directories created in /var/www/[site name] take 777 by default? any help greatly appreciated! EDIT: P.S. if anyone could give me a clue as to how the insert code feature works as well that would be great! Might make this post a bit more readable! EDIT2: Well I have had a bash at changing the permissions and ownership. sudo chown -R www-data:www-data /var/www/trbcp I then tried changing the whole /var directory (insecure I know but this is a test and dev server for me to find my feet on) to 777 and still getting permission errors. It seems to be error opening stream? Not a php guy so not sure what that is but could it be that permissions to run php script need to change? any thoughts greatly appreciated.

  Read the article

• Easy Install Resets Hardware Settings

  - by bob5972

  I think there's a problem with the Easy Install setup. I selected "Installer disc image," and it came up and said that it would use "Easy Install," I think I hit next, and then I went back changed my mind, and selected "I will install the operating system later." After finishing the wizard, I think it still went and ran Easy Install, because it auto-installed VMware tools and I never got to select anything for my windows setup. Then, when it was finished, all the hardware changes I had made were lost. The RAM was changed from 2 GB back to the default of 1 GB, my CD ROM drive was set back to "Use a Physical Drive" and "Connect at Power On", and the Floppy Drive was also set to "Connect at Power On", after I disabled them. I was trying to install Windows 7, and I wasn't sure if I could change the RAM settings after installation without needing to reactivate it, so I deleted the VM and tried to start over. This time, the "Installer disc image" had my Win7 image pre-selected, so I clicked "I will install it myself later," set my hardware again, and tried to boot off my CD. Again,it did an Easy Install, and reset my RAM and my drive settings. So I deleted it again and the third time it still had the Win7 image pre-selected, but this time I unplugged all the drives and let it try to boot off the empty harddrive and fail, and made sure it kept all my hardware settings. Then, I powered it off, put my Win7 image in the guest CD ROM, and powered it on. This time it finally let me run the installer and pick my language, and type a user name. This time when I powered it off it kept my hardware settings. I can duplicate the error by doing exactly the steps above. Creating a new VM, selecting my "Installer Image," hitting next, going back, selecting "I will Install it myself," and then finish the wizard, and customizing my hardware right before the end, setting the CD Rom drive to the same installer media, and setting "Connect on Power On." (If I start it without the CD ROM in the first time, it doesn't do it). When I power on, I'm not prompted for any install information (like language and user name), and when it runs the first timemy hardware choices are reset (like the RAM back to 1 GB). If it helps, I'm running VMware Workstation 7.0.1 build-227600 on Gentoo Linux

  Read the article

• Easy Install Resets Hardware Settings

  - by bob5972

  I think there's a problem with the Easy Install setup. I selected "Installer disc image," and it came up and said that it would use "Easy Install," I think I hit next, and then I went back changed my mind, and selected "I will install the operating system later." After finishing the wizard, I think it still went and ran Easy Install, because it auto-installed VMware tools and I never got to select anything for my windows setup. Then, when it was finished, all the hardware changes I had made were lost. The RAM was changed from 2 GB back to the default of 1 GB, my CD ROM drive was set back to "Use a Physical Drive" and "Connect at Power On", and the Floppy Drive was also set to "Connect at Power On", after I disabled them. I was trying to install Windows 7, and I wasn't sure if I could change the RAM settings after installation without needing to reactivate it, so I deleted the VM and tried to start over. This time, the "Installer disc image" had my Win7 image pre-selected, so I clicked "I will install it myself later," set my hardware again, and tried to boot off my CD. Again,it did an Easy Install, and reset my RAM and my drive settings. So I deleted it again and the third time it still had the Win7 image pre-selected, but this time I unplugged all the drives and let it try to boot off the empty harddrive and fail, and made sure it kept all my hardware settings. Then, I powered it off, put my Win7 image in the guest CD ROM, and powered it on. This time it finally let me run the installer and pick my language, and type a user name. This time when I powered it off it kept my hardware settings. I can duplicate the error by doing exactly the steps above. Creating a new VM, selecting my "Installer Image," hitting next, going back, selecting "I will Install it myself," and then finish the wizard, and customizing my hardware right before the end, setting the CD Rom drive to the same installer media, and setting "Connect on Power On." (If I start it without the CD ROM in the first time, it doesn't do it). When I power on, I'm not prompted for any install information (like language and user name), and when it runs the first timemy hardware choices are reset (like the RAM back to 1 GB). If it helps, I'm running VMware Workstation 7.0.1 build-227600 on Gentoo Linux

  Read the article

• Do glue records in non-circular dns-lookups speed up domain resolution or not?

  - by Joe Hopfgartner

  Doing a lookup for my domain on http://www.intodns.com/ I noticed theese two messages: In Parent section: DNS Parent sent Glue The parent nameserver g.gtld-servers.net is not sending out GLUE for every nameservers listed, meaning he is sending out your nameservers host names without sending the A records of those nameservers. It's ok but you have to know that this will require an extra A lookup that can delay a little the connections to your site. This happens a lot if you have nameservers on different TLD (domain.com for example with nameserver ns.domain.org.) and in NS section: Glue for NS records INFO: GLUE was not sent when I asked your nameservers for your NS records.This is ok but you should know that in this case an extra A record lookup is required in order to get the IPs of your NS records. The nameservers without glue are: 109.230.225.96 84.201.40.52 You can fix this for example by adding A records to your nameservers for the zones listed above. I do perfectly understand that the primary objective of glue records is to resolve circular dependencies. The classic use case: my domain is example.com and I want to have the nameserver ns1.example.com. This will never work because i cannot know the ip of ns1.example.com if I don't fetch example.com and in order to do that I need to fetch it from ns1.example.com. To resolve this deadlock I add a glue record to ns1.example.com containing the ip adress of the nameserver, so this can work out. So this problem does not occour if the nameservers are in a different TLD than the domain i want to look up. But however to fetch the zone information from the nameservers I need to know their ip adress right? And in order to know that i need to fetch the zone the nameservers are in from their respective nameservers, right? (or rather my ISP needs to do that in the background) So an extra lookup that takes time? If I now have glue records, I know the IP adress right away without the need to look it up - so this should speed up the resolution of my domain, shouldnt it? However my DNS zone provider (tecserver.at) replied that this would make no sense because "we are not running ns1.ourdomain.com an ns1.ourdomain.com as authorative NS for ourdomain.com. This would be the only sense for glue records. Tecserver has a glue record because the NS for tecserver.at are ns1.tecserver.at and ns2.tecserver.at. Therefore a glue record is needed for resolution.

  Read the article

• Showing Directory Root When Launching Rails App Using Apache2 and Passenger

  - by LightBe Corp

  I have done the following in an attempt to host a Rails 3.2.3 application using Apache 2.2.21 and Passenger 3.0.13: Installed gem Passenger rvmsudo passenger-install-apache2-module Added website info in /etc/apache2/extra/httpd-vhosts.conf Added line to /etc/hosts (not sure if this was needed or not; not mentioned in Passenger documentation Uncommented out the line in /etc/apache2/httpd.conf to Include /etc/apache2/extra/httpd-vhosts.conf Restarted Apache When I try to pull up my website the following displays: Index of / Name Last modified Size Description Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8r DAV/2 PHP/5.3.10 with Suhosin-Patch Phusion_Passenger/3.0.13 Server at lightbesandbox2.com Port 443 Here is /etc/hosts entry for the website: 127.0.0.1 www.lightbesandbox2.com Here is my /etc/apache2/extra/httpd-vhosts.conf entry for the website: NameVirtualHost *:80 <VirtualHost *:80> ServerName www.lightbesandbox2.com ServerAlias lightbesandbox2.com PassengerAppRoot /Users/server1/Sites/iktusnetlive_RoR/ DocumentRoot /Users/server1/Sites/iktusnetlive_RoR/public <Directory /Users/server1/Sites/iktusnetlive_RoR/public> AllowOverride all Options -MultiViews </Directory> </VirtualHost> When I do rvmsudo passenger-status I get the following output: ----------- General information ----------- max = 6 count = 1 active = 0 inactive = 1 Waiting on global queue: 0 ----------- Application groups ----------- /Users/server1/Sites/iktusnetlive_RoR/: App root: /Users/server1/Sites/iktusnetlive_RoR/ * PID: 8140 Sessions: 0 Processed: 2 Uptime: 20m 51s None of my assets are in the public folder in my Rails app. I have written an application using the template presented in Michael Hartl's Ruby on Rails Tutorial. The home page is in /app/views/static_pages/home.html.erb. I decided to copy an index.html file in the public folder to see if it would display. It displayed as I had hoped.. Is there a way to get Passenger to find my assets without me having to rewrite my application? Any help would be appreciated. Update 6/23/2012 10:00 am CDT GMT-6 I corrected the problems with my file and have successfully executed the rake assets:precompile command. I still get the index page as before. I have made no other changes. I did a passenger-status command and it is still loaded. Restarting Apache did nothing.

  Read the article

• Windows cannot find the host name "download.microsoft.com" using DNS

  - by joedotnot

  When trying to download a file found on the Microsoft downloads center that starts with, for example, http://download.microsoft.com/download/6/8/7/(some_GUID)/(some_file_name.ext) i get a timeout with "Internet Explorer cannot display the webpage". More information says: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. Diagnose Connection problems says: Windows cannot find the host name "download.microsoft.com" using DNS Bear with me while i expand on the problem: It all started when i tried to download Windows XP mode for my Windows 7 machine. I went to the virtual PC site, then thru the motions of Windows Genuine Advantage which validated ok, but when it redirects to grab the file just times out with above error. (NB: i also tried with the latest Chrome and Firefox but no use due to the Genuine Advantage stuff, so i decided to stick with IE). I am behind an ADSL2+ modem router connecting via wireless (Win 7 Pro laptop); so i hop over to the desktop connected via ethernet (Vista Business), and same result; begin to think site download.microsoft.com site is down. So i give it a break an read up on EDNS, flushing the cache, hosts file, etc... Try again an hour later on the Win 7 machine, still no go; so i turn off the Win 7 (software) firewall, and lo and behold, i can connect and grab any files from download.microsoft.com; (...nice, so we have a Micro$0ft firewall preventing access to a Micro$0ft website, no wonder my auto-updates kept failing but that's another story). But i still am not happy that the desktop connected via ethernet still cannot get to download.microsoft.com, even though i turned off all firewalls, defenders, anti-virus, etc. What is so special / specific about the url download.microsoft.com, any other site is ok, including www.microsoft.com. Any networking guru know what's REALLY going on, and how can i get the desktop to connect? Ping download.microsoft.com - Ping request could not find host download.microsoft.com. Please check the name and try again. Ping google.com or even www.microsoft.com works gives me an IP address. NB: On the wireless laptop ping download.microsoft.com works, i get xxxx.ms.akamai.net [202.7.177.33].

  Read the article

• Unable to commit file through svn, server sent truncated HTTP response body

  - by Rocket3G

  I have my own VPS, on which I want to run a simple SVN + chiliproject setup. I have re-installed SVN, CHILI and the OS several times, and it always works for a couple of hours/days and then it just stops working. Well, everything works, except I can't upload any files. Committing directories seems to work just fine, but when I try to commit a file it breaks. I have an error log file, which gives me the following text when I try to commit something x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "OPTIONS /project HTTP/1.1" 200 149 x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "PROPFIND /project HTTP/1.1" 207 346 x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "MKACTIVITY /project/!svn/act/c11d45ac-86b6-184a-ac5a-9a1105d64563 HTTP/1.1" 401 345 x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "MKACTIVITY /project/!svn/act/c11d45ac-86b6-184a-ac5a-9a1105d64563 HTTP/1.1" 201 262 x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "PROPFIND /project HTTP/1.1" 207 236 x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "CHECKOUT /project/!svn/vcc/default HTTP/1.1" 201 271 x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "PROPPATCH /project/!svn/wbl/c11d45ac-86b6-184a-ac5a-9a1105d64563/1 HTTP/1.1" 207 267 x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "CHECKOUT /project/!svn/ver/1 HTTP/1.1" 201 271 x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "HEAD /project/index.html HTTP/1.1" 404 - x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "PUT /project/!svn/wrk/c11d45ac-86b6-184a-ac5a-9a1105d64563/index.html HTTP/1.1" 201 269 x.x.x.x - admin [19/Oct/2013:00:02:04 +0200] "DELETE /project/!svn/act/c11d45ac-86b6-184a-ac5a-9a1105d64563 HTTP/1.1" 204 - So it seems that it PUTs the file (test.html) correctly, and somehow somewhere something is wrong (file permissions are alright, when I purposely stated that they are wrong, it gave me errors, which is expected, and they were about the file permissions being incorrect. The odd thing is that files won't get added, but directories are fine. I also have enough storage left on my machine. What I should note, perhaps, is that I use Ubuntu 12.04.3 with ruby 1.9.3, mysql 14.14 and I have it set up that Chiliproject handles the authentication and authorization for the project. It works, because I can commit directories and read it all correctly, though I can't upload files. Help would really be appreciated, as I don't know what on earth is going on with this 'truncated http response body'. I tried to read them with wireshark, but it basically gave me the same information. With regards, Ps. I have no clue what the delay between put and delete is, as it's a file of a mere 500 bytes, so it's uploaded in approximately a second. Pps. I copied this question from StackOverflow to this site, as I didn't know the existence of this site and another user suggested that I'd get more answers here, as it's basically a server fault.

  Read the article

• Adobe Reader not loading form content

  - by wullxz

  We have an FDL file which is used to offer an online application possibility. The FDL is filled out and sent to a mailbox. When I open the received file, Adobe Reader starts, loads the document in Internet Explorer (had to change my default browser because it doesn't work in chrome - the customer uses IE as default) and displays a warning that Adobe Reader has blocked the connection to the server where the initial document is saved: I can then click on "Trust this document once" (translated by me!) or "Add this host to trusted hosts" (also translated by me!). The second option doesn't work at all. The first option works but is a little bit annoying. I looked into Adobe Readers options (Edit - "Voreinstellungen" in german / the last option - Security (advanced)) and found the possibility to add hosts, files and directories or allow Adobe Reader to use the "Trusted Websites" list from Internetoptions. When I add the website either to Trusted Websites or the trusted list in Adobe Readers options, the warning doesn't pop up but the content in the prefilled (by the applicant) input boxes of the document doesn't show up on Windows 7 but it does show up on Windows XP. This Screenshot shows the settings window described in the last paragraph. The big input box at the bottom normally holds the trusted files/directories/hosts list. System Information: Windows 7 Enterprise x64 Adobe Reader X multiple IE versions (mine is latest but there's also IE 7 or 8) How do I get Adobe Reader to load the content of the form? This behaviour can be reproduced on a PC. When opening an fdf from a command line the form fields are blank even though there is data in the fdf and the pdf is located in a mnaully entered trsuted folder. Steps to reproduce: Clean install a Windows 7 PC (or use a virtual box) Map a network drive to a shared folder with a subfolder e.g. c:\test\docs becomes m:\docs Set security permissions to allow full control to everyone Add an fdf and a matching pdf file in the subfolder Manually add m:\docs to each of the trusted folders in the trust manager registry settings Ensure that Enhanced Security is on Run a command line to open the fdf file Expected result: pdf is opened in Adobe Reader with form fields filled out with data Actual results: pdf is opened with blank fields 'Yellow bar' appears asking to add document to trusted locations It appears that Adobe Reader XI is ignoring the privileged locations entries in the registry. Adding the document via the 'yellow bar' adds the individual document, with the same folder, to the privileged locations but means that the process has to be repeated for every document that needs to be opened from the folder.

  Read the article

• Postfix: Relay access denied

  - by Joseph Silvashy

  When I telnet to my server thats running postfix and try to send an email: MAIL FROM:<[email protected]> #=> 250 2.1.0 Ok RCPT TO:<[email protected]> #=> 554 5.7.1 <[email protected]>: Relay access denied I couldn't really find the answer on the site or by looking at other users question/answers, I'm not sure where to start. Ideas? Update So basically looking at the docs: http://www.postfix.org/SMTPD_ACCESS_README.html (section: Getting selective with SMTP access restriction lists), I don't seem to have any of those directives in etc/postfix/main.cf like smtpd_client_restrictions = permit_mynetworks, reject or any of the other ones, so I'm quite confused. But really I'm going to have a rails app connect to the server and send the emails, so I'm not sure how to handle it. Here is what my config file looks like: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = rerecipe-utils alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = $myhostname, localhost.$mydomain, localhost, mail.rerecipe.com, rerecipe.com relayhost = mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all mynetworks = 127.0.0.0/8 204.232.207.0/24 10.177.64.0/19 [::1]/128 [fe80::%eth0]/64 [fe80::%eth1]/64 Something to note is that relayhost is blank, this is the default configuration file that was created when I installed Postfix, when testing to connect with openssl I get this: ~% openssl s_client -connect mail.myhostname.com:25 -starttls smtp CONNECTED(00000003) depth=0 /CN=myhostname verify error:num=18:self signed certificate verify return:1 depth=0 /CN=myhostname verify return:1 --- Certificate chain 0 s:/CN=myhostname i:/CN=myhostname --- Server certificate -----BEGIN CERTIFICATE----- MIIBqTCCARICCQDDxVr+420qvjANBgkqhkiG9w0BAQUFADAZMRcwFQYDVQQDEw5y ZXJlY2lwZS11dGlsczAeFw0xMDEwMTMwNjU1MTVaFw0yMDEwMTAwNjU1MTVaMBkx FzAVBgNVBAMTDnJlcmVjaXBlLXV0aWxzMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCB iQKBgQDODh2w4A1k0qiPNPhkrPj8sfkxpKPTk28AuZhgOEBYBLeHacTKNH0jXxPv P3TyhINijvvdDPzyuPJoTTliR2EHR/nL4DLhr5FzhV+PB4PsIFUER7arx+1sMjz6 5l/Ubu1ppMzW9U0IFNbaPm2AiiGBQRCQN8L0bLUjzVzwoSRMOQIDAQABMA0GCSqG SIb3DQEBBQUAA4GBALi2vvk9TGKJubXYJbU0PKmVmsfzFK35yLqr0keiDBhK2Leg 274sWxEH3ds8mUaRftuFlXb7RYAGNlVyTuMTY3CEcnqIsH7F2McCUTpjMzu/o1mZ O/B21CelKetBd1u79Gkrv2vWyN7Csft6uTx5NIGG2+pGi3r0gX2r0Hbu2K94 -----END CERTIFICATE----- subject=/CN=myhostname issuer=/CN=myhostname --- No client certificate CA names sent --- SSL handshake has read 1203 bytes and written 360 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 1AA4B8BFAAA85DA9ED4755194C50311670E57C35B8C51F9C2749936DA11918E4 Session-ID-ctx: Master-Key: 9B432F1DE9F3580DCC6208C76F96631DC5A4BC517BDBADD5F514414DCF34AC526C30687B96C5C4742E9583555A118232 Key-Arg : None Start Time: 1292985376 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- 250 DSN Oddly enough when I try to send an email from the machine itself it does work: echo test | mail -s "test subject" [email protected]

  Read the article

• Why does Ubuntu 9.10 hang during boot at "Booting processor 1 APIC 0x1 ip 0x6000"?

  - by BraeburnDev

  I recently installed a new copy of Ubuntu 9.10 (Kernel 2.6.31-14) on to my Hp Pavilion dv6t, so I can setup a Linux development environment. The install went flawlessly and I proceeded with Ubuntu's udate manager's long list of updates (292 in all). I also setup a swap file and activated a Nvidia 185 driver for the Nvidia 260m GPU on the machine. After all this was done I restarted the computer and booted into Ubuntu this time with a newer 2.6.31-19 Kernel which was installed from the update manager. During booth the computer hung at this point: Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013136] Performance Counters: Nehalem/Corei7 events, Intel PMU driver. Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013141] ... version: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013142] ... bit width: 48 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013144] ... generic counters: 4 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013146] ... value mask: 0000ffffffffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013147] ... max period: 000000007fffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013149] ... fixed-purpose counters: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013151] ... counter mask: 000000070000000f Feb 24 14:23:12 braeburn-laptop kernel: [ 0.015539] ACPI: Core revision 20090521 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052264] Setting APIC routing to flat Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052639] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.152580] CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.270845] Booting processor 1 APIC 0x1 ip 0x6000 I can post a full kern.log of this boot process if requested. Hopefully this is enough information to go on. I should add that I'm still new to configuring and running a Linux OS although I know enough basic command line usage to do software development. This is my attempt to become more familiar with Linux and manage my own system. I'd like to get some insight on the nature of this system hang, what the problem is and how to resolve it. At this point I can scrap the install if I broke something, but my intuition says this is an issue with the kernel recognizing the correct hardware configuration for my system, or perhaps this is an issue with the APIC drivers managing Nehalem's new power management capabilities? Thanks for looking at this issue and providing feed back.

  Read the article

• Vagrant-aws not provisioning

  - by SuperCabbage

  I'm trying to spin up and provision an EC2 instance with Vagrant, it successfully creates the instance up and I can then use vagrant ssh to SSH into the it but Puppet doesn't seem to carry out any provisioning. Upon running vagrant up --provider=aws --provision I get the following output Bringing machine 'default' up with 'aws' provider... WARNING: Nokogiri was built against LibXML version 2.8.0, but has dynamically loaded 2.9.1 [default] Warning! The AWS provider doesn't support any of the Vagrant high-level network configurations (`config.vm.network`). They will be silently ignored. [default] Launching an instance with the following settings... [default] -- Type: m1.small [default] -- AMI: ami-a73264ce [default] -- Region: us-east-1 [default] -- Keypair: banderton [default] -- Block Device Mapping: [] [default] -- Terminate On Shutdown: false [default] Waiting for SSH to become available... [default] Machine is booted and ready for use! [default] Rsyncing folder: /Users/benanderton/development/projects/my-project/aws/ => /vagrant [default] Rsyncing folder: /Users/benanderton/development/projects/my-project/aws/manifests/ => /tmp/vagrant-puppet/manifests [default] Rsyncing folder: /Users/benanderton/development/projects/my-project/aws/modules/ => /tmp/vagrant-puppet/modules-0 [default] Running provisioner: puppet... An error occurred while executing multiple actions in parallel. Any errors that occurred are shown below. An error occurred while executing the action on the 'default' machine. Please handle this error then try again: No error message I can then SSH into the instance by using vagrant ssh but none of my provisioning has taken place, so I'm assuming that errors have occured but I'm not being given any useful information relating to them. My Vagrantfile is as following; Vagrant.configure("2") do |config| config.vm.box = "ubuntu_aws" config.vm.box_url = "https://github.com/mitchellh/vagrant-aws/raw/master/dummy.box" config.vm.provider :aws do |aws, override| aws.access_key_id = "REDACTED" aws.secret_access_key = "REDACTED" aws.keypair_name = "banderton" override.ssh.private_key_path = "~/.ssh/banderton.pem" override.ssh.username = "ubuntu" aws.ami = "ami-a73264ce" end config.vm.provision :puppet do |puppet| puppet.manifests_path = "manifests" puppet.module_path = "modules" puppet.options = ['--verbose'] end end My Puppet manifest is as following; package { [ 'build-essential', 'vim', 'curl', 'git-core', 'nano', 'freetds-bin' ]: ensure => 'installed', } None of the packages are installed.

  Read the article

• mint linux, DVD drive keeps randomly being accessed. unsure how to find culprit

  - by juicebox

  I have a workstation with mint linux 12. It seems like the DVD drive on the machine keeps randomly "activating". By activating it makes noise, the light turns on, and it seems like it is checking if a disk is in it. At first I thought I was being hacked and someone/something was trying to check if I had media in the DVDRom drive. I ruled that out with netstat and rkhunter. I checked my logs and the only thing I can find that might help point out the problem are these repeated chunks in syslog: Mar 24 17:47:31 rich-MINT kernel: [ 9846.551422] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in Mar 24 17:47:31 rich-MINT kernel: [ 9846.551424] res 51/40:01:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) Mar 24 17:47:31 rich-MINT kernel: [ 9846.551427] ata2.00: status: { DRDY ERR } Mar 24 17:47:31 rich-MINT kernel: [ 9846.551433] ata2.00: hard resetting link Mar 24 17:47:32 rich-MINT kernel: [ 9846.868012] ata2.01: hard resetting link Mar 24 17:47:32 rich-MINT kernel: [ 9847.344054] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Mar 24 17:47:32 rich-MINT kernel: [ 9847.344067] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 24 17:47:32 rich-MINT kernel: [ 9847.376118] ata2.00: configured for PIO0 Mar 24 17:47:32 rich-MINT kernel: [ 9847.393047] ata2.01: configured for UDMA/133 Mar 24 17:47:32 rich-MINT kernel: [ 9847.397046] ata2: EH complete and again Mar 24 17:55:28 rich-MINT kernel: [10323.633268] sr 1:0:0:0: ioctl_internal_command return code = 8000002 Mar 24 17:55:28 rich-MINT kernel: [10323.633270] : Sense Key : Aborted Command [current] [descriptor] Mar 24 17:55:28 rich-MINT kernel: [10323.633275] : Add. Sense: No additional sense information Mar 24 17:55:11 rich-MINT kernel: [10306.640009] ata2.00: link is slow to respond, please be patient (ready=0) Mar 24 17:55:16 rich-MINT kernel: [10310.840009] ata2.00: SRST failed (errno=-16) Mar 24 17:55:16 rich-MINT kernel: [10310.840016] ata2.00: hard resetting link Mar 24 17:55:16 rich-MINT kernel: [10311.160013] ata2.01: hard resetting link Mar 24 17:55:16 rich-MINT kernel: [10311.636061] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Mar 24 17:55:16 rich-MINT kernel: [10311.636075] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 24 17:55:16 rich-MINT kernel: [10311.668122] ata2.00: configured for PIO0 Mar 24 17:55:16 rich-MINT kernel: [10311.684854] ata2.01: configured for UDMA/133 Mar 24 17:55:17 rich-MINT kernel: [10312.105473] ata2: EH complete (Copied from Pastebin - http://pastebin.com/YNDrnyzH) If any linux masters could take a quick look at these log outputs and help me understand what is going on , much appreciated.

  Read the article

• Snow Leopard can see Windows shares in Finder but can't connect

  - by Randy Miller

  I have an iMac with the latest version of Snow Leopard on it. I have a NAS drive and a Windows machine that both show up in the Finder's 'Shared' section. However, if I click on them, Finder says "Connection Failed". Clicking on 'Connect As...' gives an error dialog that says "The server 'blah' may not exist or it is unavailable at this time." Points of interest: All machines are receiving their IP/DNS info from the router using DHCP. I have a Mac Mini on the same network that connects to the NAS drive and windows machine perfectly with no config (i.e. worked out of the box). Both Macs are on the same version of Snow Leopard. There is no password required to access the NAS share. I've never setup a WINS server on any machines and all machines are using 'workgroup' by default. I've tried putting "workgroup" in the Mac's workgroup entry and have tried leaving it blank, neither solves the problem. Here are some things I have tried: Finder-Connect To Server: smb:///share. This works, but by name does not. Terminal-mount_smbfs //@/share share. This also works by ip, but not be name, resulting in "mount_smbfs: server connection failed: No route to host". If I put the IP address of the NAS in the WINS server entry in the Mac's network setup, I can connect by name. It obviously seems to be a name resolution error, but I can't figure out why. The only thing that has changed since it used to work is that I got a new router that now gives out DHCP (all machines are dhcp clients) addresses of 192.168.x.x, but used to be 10.0.x.x. I've grep'd through everything that might have saved that old address, but can't find anything. It's also worth noting that the second Mac (the one that connects successfully) was added to the network after the router change. Please let me know if there are additional points of information needed to troubleshoot this further. Thanks, Randy

  Read the article

• Strange permission errors with Windows Server 2008

  - by Spirit

  I just don't know a better way to describe my issue that is driving me nuts. I am trying to establish a test domain with virtual machines on a box that has Win7 with VMwware workstation installed. The purpouse with this domain will be so that we can try and test different situations before they go into the production network. I build a VM with WinSrv2008R2 and I am using that VM as a template to make other servers for the domain by making clones of it. Now I raise a DC with one clone and a member server with another clone - I add the server to the domain. I am following a standard procedure as always (it is not my first domain). Then I make an admin account and I am adding the admin to be a member of the Domain and Enterprise Admins group. That admin is admin with full priviledges on the DC.. no problem there. But on the other server has ... somewhat half the privileges and I cant log in via RDP. I tryed with another account. Same issues. For example (with half the privileges): I can't open the Even Viewer if I go via Start - Administrative Tools - Event Viewer. But I can open the Even Viewer via the server manager. You can notice this on the image below. I mean WTF??? I am going crazy, I haven't experienced anything similar in my three years of expertise. I already lost 3 days troubleshooting this. Could this be related with the cloning? Perhaps if I make fresh installs of WinSrv2008 there won't be any problems? I've had raised test domains as VMs on other occasions before, and there weren't any problems then. This is VMware Workstation 8. I've made clones before, on Workstation 7 it didn't had any problems. Anyone has any ideas? UPDATE: This is the info from the event log when I try to access via RDP: An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: pat.coleman Account Domain: lab Failure Information: Failure Reason: Domain sid inconsistent. Status: 0xc000006d Sub Status: 0xc000019b

  Read the article

• Looking for Fiddler2 help. connection to gateway refused? Just got rid of a virus

  - by John Mackey

  I use Fiddler2 for facebook game items, and it's been a great success. I accessed a website to download some dat files I needed. I think it was eshare, ziddu or megaupload, one of those. Anyway, even before the rar file had downloaded, I got this weird green shield in the bottom right hand corner of my computer. It said a Trojan was trying to access my computer, or something to that extent. It prompted me to click the shield to begin anti-virus scanning. It turns out this rogue program is called Antivirus System Pro and is pretty hard to get rid of. After discovering the rogue program, I tried using Fiddler and got the following error: [Fiddler] Connection to Gateway failed.Exception Text: No connection could be made because the target machine actively refused it 127.0.0.1:5555 I ended up purchasing SpyDoctor + Antivirus, which I'm told is designed specifically for getting rid of these types of programs. Anyway, I did a quick-scan last night with spydoctor and malware bytes. Malware picked up 2 files, and Spydoctor found 4. Most were insignificant, but it did find a worm called Worm.Alcra.F, which was labeled high-priority. I don’t know if that’s the Anti-Virus Pro or not, but SpyDoctor said it got rid of all of those successfully. I tried to run Fiddler again before leaving home, but was still getting the "gateway failed" error. Im using the newest version of firefox. When I initially set up the Fiddler 2.2.8.6, I couldn’t get it to run at first, so I found this faq on the internet that said I needed to go through ToolsOptionsSettings and set up an HTTP Proxy to 127.0.0.1 and my Port to 8888. Once I set that up and downloaded this fiddler helper as a firefox add-on, it worked fine. When I turn on fiddler, it automatically takes my proxy setting from no proxy (default) to the 127.0.0.1 with Port 8888 set up. It worked fine until my computer detected this virus. Anyway, hopefully I've given you sufficient information to offer me your best advice here. Like I said, Spydoctor says the bad stuff is gone, so maybe the rogue program made some type of change in my fiddler that I could just reset or uncheck or something like that? Or will I need to completely remove fiddler and those dat files and rar files I downloaded? Any help would be greatly appreciated. Thanks for your time.

  Read the article

• 64-bit linux kernel only seeing 3 of 4GB after upgrade...

  - by Blaine

  Hey everyone. I am running Ubuntu 9.04 64-bit on my macbook. I had 2GB of ram before, and everything ran great. I just upgraded to 2x2GB (4GB), but my system only sees 3GB of it. OS X, which I am dual booting, sees all 4GB. Also, my video performance is incredibly lacking. Before the upgrade my compiz benchmark was full at 80fps, and now it is at 22fps with very choppy window dragging. Has anyone ever heard of this on a 64-bit kernel? I just don't quite understand what could be the issue. 10$ uname -a Linux macbook 2.6.28-15-generic #49-Ubuntu SMP Tue Aug 18 19:25:34 UTC 2009 x86_64 GNU/Linux $ free -m total used free shared buffers cached Mem: 2953 1031 1921 0 114 427 -/+ buffers/cache: 489 2463 Swap: 7812 0 7812 9$ lsmod Module Size Used by i915 77960 2 drm 123232 3 i915 binfmt_misc 18572 1 ppdev 16904 0 btusb 21784 2 bridge 63776 0 stp 11140 1 bridge bnep 22912 2 vboxnetadp 109356 0 vboxnetflt 116972 0 vboxdrv 1721612 1 vboxnetflt uvcvideo 69640 0 compat_ioctl32 18304 1 uvcvideo videodev 45184 2 uvcvideo,compat_ioctl32 v4l1_compat 23940 2 uvcvideo,videodev lp 19588 0 parport 49584 2 ppdev,lp snd_hda_intel 557492 3 snd_pcm_oss 52352 0 snd_mixer_oss 24960 1 snd_pcm_oss snd_pcm 99464 2 snd_hda_intel,snd_pcm_oss arc4 10240 2 snd_seq_dummy 11524 0 ecb 11392 2 snd_seq_oss 41984 0 snd_seq_midi 15744 0 snd_rawmidi 33920 1 snd_seq_midi snd_seq_midi_event 16512 2 snd_seq_oss,snd_seq_midi snd_seq 66272 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event ath9k 310584 0 snd_timer 34064 2 snd_pcm,snd_seq snd_seq_device 16276 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq mac80211 251528 1 ath9k iTCO_wdt 21712 0 iTCO_vendor_support 12420 1 iTCO_wdt joydev 20992 0 video 29204 0 snd 78920 15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device applesmc 37700 0 output 11648 1 video soundcore 16800 1 snd pcspkr 11136 0 cfg80211 43680 1 mac80211 appletouch 19972 0 isight_firmware 11520 0 input_polldev 12688 1 applesmc intel_agp 39408 1 snd_page_alloc 18704 2 snd_hda_intel,snd_pcm led_class 13064 2 ath9k,applesmc hid_apple 15872 0 usbhid 47040 0 ohci1394 42164 0 ieee1394 108288 1 ohci1394 sky2 63364 0 fbcon 49792 0 tileblit 11264 1 fbcon font 17024 1 fbcon bitblit 14464 1 fbcon softcursor 10368 1 bitblit Some information from dmesg: [ 795.820163] ACPI: EC: GPE storm detected, transactions will use polling mode [ 1762.709516] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 1763.078130] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 2362.760889] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 2416.352084] ACPI: EC: missing confirmations, switch off interrupt mode. [ 3718.721095] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 3719.108914] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 4318.773266] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 9513.813066] CE: hpet increasing min_delta_ns to 15000 nsec [ 9693.815684] npviewer.bin[6736]

  Read the article

• Wake On Lan only works on first boot, not sequent ones

  - by sp3ctum

  I have converted my old Dell Latitude D410 laptop to a server for tinkering. It is running an updated Debian Squeeze (6) with a Xen enabled kernel (I want to toy with virtual machines later on). I am running it 'headless' via an ethernet connection. I am struggling to enable Wake On Lan for the box. I have enabled the setting in the BIOS, and it works nicely, but only for the first time after the power cord is plugged in. Here is my test: Plug in power cord, don't boot yet Send magic Wake On Lan packet from test machine (Ubuntu) using the wakeonlan program Server expected to start (does every time) Once server has booted, log in via ssh and shut it down via the operating system After shutdown, wake server up via WOL again (fails every time) Some observations: Right after step 1 I can see the integrated NIC has a light on. I deduce this means the NIC gets adequate power and that the ethernet cable is connected to my switch. This light is not on after step 4 (the shutdown stage). The light becomes back on after I disconnect and reconnect the power cord, after which WOL works as well. After step 4 I can verify that wake on lan is enabled via the ethtool program (repeatable each time) This blog post suggested the problem may lay in the fact the motherboard might not be giving adequate power to the NIC after shutdown, so I copied an acpitool script that supposedly should signal the system to give the needed power to the card when shut down. Obviously it did not fix my issue. I have included the relevant power settings in the paste below. I have tried different combinations of parameters of shutdown (the program) options, as well as the poweroff program. I even tried "telinit 0", which I figured would do the most direct boot via software. If I keep the laptop's power button pressed down and do a hard boot this way, the light on the ethernet port stays lit and a WOL is possible. I copied a bunch of hopefully useful information in this paste I have tried this with the laptop battery connected and without it. I get the same result. Promptly pressing the power button causes the system to shut down with the message "The system is going down for system halt NOW!", and WOL is still unsuccessful.

  Read the article

• APC ups es 700 randomly overload

  - by Matteo Mosca

  First of all, I live in Italy, Europe, so keep this in mind for Volt/Watt considerations. Standard voltage in Italian apartments is 220V. In my living room I have 2 APC ups, one being an ES-550 and the other an ES-700 They each have 4 slots for surge protection only, and 4 slots for surge protection + battery backup. Just to give all the information, they both got their battery replaced less than one month ago. The ES-550 works fine, without any problem. On the battery I have connected: Pc Monitor Sony Bravia 46'' 4th slot is empty The ES-700 has the following on battery: Xbox 360 Ps3 (standby when not used) Wii (standby when not used) Netgear 8 port switch (always on) Here's what happens: the ES-700, randomly, but mostly at night when I'm sleeping, goes like "overload", with the constant beep. If I try to shut it off keeping the power button pressed, nothing happens. The only thing that works is unplugging random stuff (sometimes unplugging 1 console works, other times I have to unplug all 4 devices). Every time this happens the problem is "real", meaning the 4 devices become unpowered, so it's not just an "alarm no working properly" problem. While I'm sleeping, of course, the power usage is what described on the list, 2 devices on standy, 1 off and 1 on. Today it happened again while I was playing with my Ps3. I unplugged it, problem went away. I plugged it again, and it kept working fine. I just can't figure out what's the problem. The only additional info I can provide is that this behaviour started after a big power outage last december 26 (a blackout that lasted almost all day) but the "surge protection" part of those UPS should be there for those problems, to leverage peaks when power goes away or gets restored. Another funny thing is, althought it might not be related, for a couple of days after that event the Wii was unable to power on, I thought its power transformer was broken, but then it suddenly started working again. I can be sure it's not the Wii overloading the UPS because the overload happens even if I leave the Wii unplugged. Any suggestion is really appreciated, and I can provide any additional info, if needed, that didn't come to mind right now. Thanks.

  Read the article

• Allow email from a particular sender through spam filter

  - by Greg

  We are running exchange 2010 and are using the built in anti-spam feature. We have set up Content Filtering, IP Block List Providers, Sender ID, Sender Reputation and it filters out most of the junk but it also quarantines all emails from one of our customers. It is being quarantined because of the Content Filter agent (Report Below). How can I add an exception for this email address to the Content Filter. I can see how to setup an exception for a delivery address ("Don't filter messages sent TO the following recipients") but I want to add [email protected] to our safe list. I don't want to add the whole domain as it is a very popular ISP in Australia and we often get junk from them. Filter Report: > Diagnostic information for administrators: > > Generating server: something.com > > [email protected] > #550 5.2.1 Content Filter agent quarantined this message ## > > Original message headers: > > Received: from icp-osb-irony-out4.external.iinet.net.au (203.59.1.220) > by server.local.something.com.au (192.5.0.105) with Microsoft SMTP > Server id > 14.1.218.12; Mon, 5 Nov 2012 02:40:40 +1100 X-IronPort-Anti-Spam-Filtered: true X-IronPort-Anti-Spam-Result: > AscOALeLllB8qwLw/2dsb2JhbABEKYUFhiigRQOWCwQEgQiBCIIZFAEBTiwCCAIBBwEIFDkBBBoqARoCAQIDAYd4uEuRXGEDiCWFT44UijeDAw > X-IronPort-AV: E=Sophos;i="4.80,710,1344182400"; > d="scan'208,217";a="55137861" Received: from unknown (HELO > asdf83c05c53a3) ([124.171.2.240]) by icp-osb-irony-out4.iinet.net.au > with ESMTP; 04 Nov 2012 23:40:26 +0800 Message-ID: > <E8C866D0299E4BCB8B156723893EB735@asdf83c05c53a3> From: Customer > <[email protected]> To: 'Person' <[email protected]> > Subject: A long sentance Date: Mon, 5 Nov 2011 06:07:57 +1100 > MIME-Version: 1.0 Content-Type: multipart/alternative; > boundary="----=_NextPart_000_0005_01C5F962.3CD09120" X-Priority: 3 > X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express > 6.00.2900.5931 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.6157 Return-Path: [email protected] Received-SPF: None > (server.local.something.com.au: [email protected] does not > designate permitted sender hosts)

  Read the article

< Previous Page | 890 891 892 893 894 895 896 897 898 899 900 901  | Next Page >