Search Results

Search found 889 results on 36 pages for 'andy bowskill'.

Page 9/36 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• LSI 9285-8e and Supermicro SC837E26-RJBOD1 duplicate enclosure ID and slot numbers

  - by Andy Shinn

  I am working with 2 x Supermicro SC837E26-RJBOD1 chassis connected to a single LSI 9285-8e card in a Supermicro 1U host. There are 28 drives in each chassis for a total of 56 drives in 28 RAID1 mirrors. The problem I am running in to is that there are duplicate slots for the 2 chassis (the slots list twice and only go from 0 to 27). All the drives also show the same enclosure ID (ID 36). However, MegaCLI -encinfo lists the 2 enclosures correctly (ID 36 and ID 65). My question is, why would this happen? Is there an option I am missing to use 2 enclosures effectively? This is blocking me rebuilding a drive that failed in slot 11 since I can only specify enclosure and slot as parameters to replace a drive. When I do this, it picks the wrong slot 11 (device ID 46 instead of device ID 19). Adapter #1 is the LSI 9285-8e, adapter #0 (which I removed due to space limitations) is the onboard LSI. Adapter information: Adapter #1 ============================================================================== Versions ================ Product Name : LSI MegaRAID SAS 9285-8e Serial No : SV12704804 FW Package Build: 23.1.1-0004 Mfg. Data ================ Mfg. Date : 06/30/11 Rework Date : 00/00/00 Revision No : 00A Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 5.25.00_4.11.05.00_0x05040000 WebBIOS Version : 6.1-20-e_20-Rel Preboot CLI Version: 05.01-04:#%00001 FW Version : 3.140.15-1320 NVDATA Version : 2.1106.03-0051 Boot Block Version : 2.04.00.00-0001 BOOT Version : 06.253.57.219 Pending Images in Flash ================ None PCI Info ================ Vendor Id : 1000 Device Id : 005b SubVendorId : 1000 SubDeviceId : 9285 Host Interface : PCIE ChipRevision : B0 Number of Frontend Port: 0 Device Interface : PCIE Number of Backend Port: 8 Port : Address 0 5003048000ee8e7f 1 5003048000ee8a7f 2 0000000000000000 3 0000000000000000 4 0000000000000000 5 0000000000000000 6 0000000000000000 7 0000000000000000 HW Configuration ================ SAS Address : 500605b0038f9210 BBU : Present Alarm : Present NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 1024MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Present Temperature sensor for controller : Absent ROC temperature : 70 degree Celcius Settings ================ Current Time : 18:24:36 3/13, 2012 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 2 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : Disabled Cluster Mode : Disabled Alarm : Enabled Auto Rebuild : Enabled Battery Warning : Enabled Ecc Bucket Size : 15 Ecc Bucket Leak Rate : 1440 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Enabled Maintain PD Fail History : Enabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : No Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 10 Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No Capabilities ================ RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Mix of SAS/SATA of HDD type in VD Allowed Status ================ ECC Bucket Count : 0 Limitations ================ Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 1008 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Max LD per array : 16 Min Strip Size : 8 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 887 MB Device Present ================ Virtual Drives : 28 Degraded : 0 Offline : 0 Physical Devices : 59 Disks : 56 Critical Disks : 0 Failed Disks : 0 Supported Adapter Operations ================ Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : No Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : No Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : Yes Support PI : No Support Boot Time PFK Change : Yes Disable Online PFK Change : No PFK TrailTime Remaining : 0 days 0 hours Support Shield State : Yes Block SSD Write Disk Cache Change: Yes Supported VD Operations ================ Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : No Support Breakmirror : No Power Savings : Yes Supported PD Operations ================ Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : Yes Disable Copyback : No Enable JBOD : No Enable Copyback on SMART : No Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : Yes Disable Spin Down of hot spares : No Spin Down time : 30 T10 Power State : Yes Error Counters ================ Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0 Cluster Information ================ Cluster Permitted : No Cluster Active : No Default Settings ================ Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WB Read Policy : Adaptive Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : Yes Coercion Mode : None ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : No Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : Yes Allow SSD SAS/SATA Mix in VD : No Allow HDD/SSD Mix in VD : No Allow SATA in Cluster : No Max Chained Enclosures : 16 Disable Ctrl-R : Yes Enable Web BIOS : Yes Direct PD Mapping : No BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : Yes Maintain PD Fail History : Yes Disable Puncturing : No Zero Based Enclosure Enumeration : No PreBoot CLI Enabled : Yes LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : No Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : No Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : No Max LD per array : 16 Power Saving option : Don't Auto spin down Configured Drives Max power savings option is not allowed for LDs. Only T10 power conditions are to be used. Default spin down time in minutes: 30 Enable JBOD : No TTY Log In Flash : No Auto Enhanced Import : No BreakMirror RAID Support : No Disable Join Mirror : No Enable Shield State : Yes Time taken to detect CME : 60s Exit Code: 0x00 Enclosure information: # /opt/MegaRAID/MegaCli/MegaCli64 -encinfo -a1 Number of enclosures on adapter 1 -- 3 Enclosure 0: Device ID : 36 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port B Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 65 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11820 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 48 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 1: Device ID : 65 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port A Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 36 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11760 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 47 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 2: Device ID : 252 Number of Slots : 8 Number of Power Supplies : 0 Number of Fans : 0 Number of Temperature Sensors : 0 Number of Alarms : 0 Number of SIM Modules : 1 Number of Physical Drives : 0 Status : Normal Position : 1 Connector Name : Unavailable Enclosure type : SGPIO Failed in first Inquiry commnad FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : Unavailable Inquiry data : Vendor Identification : LSI Product Identification : SGPIO Product Revision Level : N/A Vendor Specific : Exit Code: 0x00 Now, notice that each slot 11 device shows an enclosure ID of 36, I think this is where the discrepancy happens. One should be 36. But the other should be on enclosure 65. Drives in slot 11: Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 5, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 48 WWN: Sequence Number: 11 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : YES Device Firmware Level: A5C0 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8a53 Connected Port Number: 1(path0) Inquiry Data: MJ1311YNG6YYXAHitachi HDS5C3030ALA630 MEAOA5C0 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 19, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 19 WWN: Sequence Number: 4 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : NO Device Firmware Level: A580 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8e53 Connected Port Number: 0(path0) Inquiry Data: MJ1313YNG1VA5CHitachi HDS5C3030ALA630 MEAOA580 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Update 06/28/12: I finally have some new information about (what we think) the root cause of this problem so I thought I would share. After getting in contact with a very knowledgeable Supermicro tech, they provided us with a tool called Xflash (doesn't appear to be readily available on their FTP). When we gathered some information using this utility, my colleague found something very strange: root@mogile2 test]# ./xflash.dat -i get avail Initializing Interface. Expander: SAS2X36 (SAS2x36) 1) SAS2X36 (SAS2x36) (50030480:00EE917F) (0.0.0.0) 2) SAS2X36 (SAS2x36) (50030480:00E9D67F) (0.0.0.0) 3) SAS2X36 (SAS2x36) (50030480:0112D97F) (0.0.0.0) This lists the connected enclosures. You see the 3 connected (we have since added a 3rd and a 4th which is not yet showing up) with their respective SAS address / WWN (50030480:00EE917F). Now we can use this address to get information on the individual enclosures: [root@mogile2 test]# ./xflash.dat -i 5003048000EE917F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00EE917F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 5003048000E9D67F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00E9D67F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 500304800112D97F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:0112D97F Enclosure Logical Id: 50030480:0112D97F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 Did you catch it? The first 2 enclosures logical ID is partially masked out where the 3rd one (which has a correct unique enclosure ID) is not. We pointed this out to Supermicro and were able to confirm that this address is supposed to be set during manufacturing and there was a problem with a certain batch of these enclosures where the logical ID was not set. We believe that the RAID controller is determining the ID based on the logical ID and since our first 2 enclosures have the same logical ID, they get the same enclosure ID. We also confirmed that 0000007F is the default which comes from LSI as an ID. The next pointer that helps confirm this could be a manufacturing problem with a run of JBODs is the fact that all 6 of the enclosures that have this problem begin with 00E. I believe that between 00E8 and 00EE Supermicro forgot to program the logical IDs correctly and neglected to recall or fix the problem post production. Fortunately for us, there is a tool to manage the WWN and logical ID of the devices from Supermicro: ftp://ftp.supermicro.com/utility/ExpanderXtools_Lite/. Our next step is to schedule a shutdown of these JBODs (after data migration) and reprogram the logical ID and see if it solves the problem. Update 06/28/12 #2: I just discovered this FAQ at Supermicro while Google searching for "lsi 0000007f": http://www.supermicro.com/support/faqs/faq.cfm?faq=11805. I still don't understand why, in the last several times we contacted Supermicro, they would have never directed us to this article :\

  Read the article

• Can I delete EFI System Partition without harming other data on drive?

  - by Andy

  I have three external HDD's in a USB enclosure. After a recent upgrade to Win7, during which these three drives were actually installed inside the PC tower, two of the three drives now have a 200MB EFI partition, and the two drives do not show up as usable drives under either Win7 or Snow Leopard. One of the drives is empty; the other one, however, has a bunch of stuff on it that I want to save if possible. My question is, how can I get back to this data? Can I simply delete the EFI partition, and all will be well? Or do I have to do something trickier? Or am I just hosed?

  Read the article

• Chroot within chroot

  - by Andy

  I'm using Centos 5.2 and when I try to make a chroot jail using the script, I get: Copying libraries for /usr/bin/scp. (0x00007fff17bfe000) cp: cannot stat `(0x00007fff17bfe000)': No such file or directory ... I am currently using on a rackspace cloud server so i suspect that these dependencies are outside of my own root. Does anyone have a better idea for jailing the sftp server on a cloud server using Centos 5.2?

  Read the article

• Varnish VCL Reload Fails After Adding Second Backend

  - by Andy

  I have been running Varnish on my production server successfully for several weeks now. Now I'm trying to configure Varnish to use a second backend for certain requests. My original working VCL (/etc/varnish/default.vcl) begins like this: backend default { .host = "127.0.0.1"; .port = "8080"; } ...rest of VCL... And I'm changing it to: backend default { .host = "127.0.0.1"; .port = "8080"; } backend backend2 { .host = "12.34.56.78"; .port = "80"; } ...rest of VCL... When I reload the VCL file, I get the following: Command failed with error code 106 Failed to reload /etc/varnish/default.vcl. Any idea what the error could be, or how I can get more information on the problem?

  Read the article

• Is anyone using KVM in production?

  - by Andy Shellam

  I've been trying to set up a pair of servers utilising KVM on Ubuntu 9.10 to host 8 virtual machines between them and ended up with various issues from the VMs freezing, to not powering on. I had one virtual server set up and running and was setting up a second, when any operation involving OpenSSL would cause the VM to lock up in a weird way - all network traffic would cease, it wouldn't process logins on the console, but it wasn't taking any CPU time off the host. The first virtual server was identical and worked perfectly. Another VM I tried to setup had installed Ubuntu fine then refused to reboot, throwing kernel exceptions to do with XFS. I've now installed Citrix XenServer 5.5 on both hosts, and am now setting up my third VM with absolutely no issues. I also had the same experience when I tried VMware, but I preferred Xen as it appears to give more features on the free license. My question is am I just unlucky with KVM, or is KVM as unstable as it appears? Are you using, or planning on using, KVM in production, and how successful have you been?

  Read the article

• Windows Server 2008 x86 Services for Unix SDK (SUA) RSH

  - by Andy Arismendi

  Running RSH commands on a Windows box against a Linux box works only for the administrator user. Is there a file somewhere that has a list of users that can run commands remotely? More Info The server configuration is automated by VMware's product... There's no /etc/hosts.equiv file setup but there is a /root/.rhosts file with an entry of [IP ADDRESS] +. The SUA client C:\Windows\SUA\bin\rsh can login when run as the local administrator account but no other user can login. The error is: rcmd: unknown user: [username]. The command I'm trying to run is: rsh -l root [IP ADDRESS] ls.

  Read the article

• Why aren't RemoteApp icons showing up

  - by Andy Schneider

  I have a Windows 2008 R2 server running RDS. I have installed and configured RemoteApp to publish applications with RDS Web Access. When I browse to https://servernname.domain.local/RDWeb I can log in and get to the RemoteApp Programs tab, but there are no icons or apps to click on. I have added a bunch of apps in Remote App manager and they are all enabled for RD Web Access. Also, I am an administrator on the server.

  Read the article

• IIS URL Rewrite HTTP to HTTPS with Port

  - by Andy Arismendi

  My website has two bindings: 1000 and 1443 (port 80/443 are in use by another website on the same IIS instance). Port 1000 is HTTP, port 1443 is HTTPS. What I want to do is redirect any incoming request using "htt p://server:1000" to "htt ps://server:1443". I'm playing around with IIS 7 rewrite module 2.0 but I'm banging my head against the wall. Any insight is appreciated! BTW the rewrite configuration below works great with a site that has an HTTP binding on port 80 and HTTPS binding on port 443, but it doesn't work with my ports. P.S. My URLs intentionally have spaces because the 'spam prevention mechanism' kicked in. For some reason google login doesn't work anymore so I had to create an OpenID account (No Script could be the culprit). I'm not sure how to get XML to display nicely so I added spaces after the opening brackets. < ?xml version="1.0" encoding="utf-8"? < configuration < system.webServer < rewrite < rules < rule name="HTTP to HTTPS redirect" stopProcessing="true" < match url="(.*)" / < conditions trackAllCaptures="true" < add input="{HTTPS}" pattern="off" / < /conditions < action type="Redirect" redirectType="Found" url="htt ps: // {HTTP_HOST}/{R:1}" / < /rule < /rules < /rewrite < /system.webServer < /configuration

  Read the article

• Rails, Capistrano, Nginx, Unicorn - Application has been already initialized (RuntimeError)

  - by Andy Copley

  Can anyone shed some light on what exactly this error refers to? I'm having trouble deploying new versions of the site. I, INFO -- : reloading config_file=[snip]/current/config/unicorn.rb I, INFO -- : Refreshing Gem list E, ERROR -- : error reloading config_file=[snip]/current/config/unicorn.rb: Application has been already initialized. (RuntimeError) E, ERROR -- : [snip]/shared/bundle/ruby/1.9.1/gems/railties-3.2.3/lib/rails/application.rb:135:in `initialize!' E, ERROR -- : [snip]/shared/bundle/ruby/1.9.1/gems/railties-3.2.3/lib/rails/railtie/configurable.rb:30:in `method_missing' E, ERROR -- : [snip]/releases/20120907085937/config/environment.rb:5:in `<top (required)>' E, ERROR -- : [snip]/shared/bundle/ruby/1.9.1/gems/activesupport-3.2.3/lib/active_support/dependencies.rb:251:in `require' E, ERROR -- : [snip]/shared/bundle/ruby/1.9.1/gems/activesupport-3.2.3/lib/active_support/dependencies.rb:251:in `block in require' E, ERROR -- : [snip]/shared/bundle/ruby/1.9.1/gems/activesupport-3.2.3/lib/active_support/dependencies.rb:236:in `load_dependency' E, ERROR -- : [snip]/shared/bundle/ruby/1.9.1/gems/activesupport-3.2.3/lib/active_support/dependencies.rb:251:in `require' E, ERROR -- : config.ru:4:in `block in <main>' E, ERROR -- : [snip]/shared/bundle/ruby/1.9.1/gems/rack-1.4.1/lib/rack/builder.rb:51:in `instance_eval' E, ERROR -- : [snip]/shared/bundle/ruby/1.9.1/gems/rack-1.4.1/lib/rack/builder.rb:51:in `initialize' E, ERROR -- : config.ru:1:in `new' E, ERROR -- : config.ru:1:in `<main>' E, ERROR -- : [snip]/shared/bundle/ruby/1.9.1/gems/unicorn-4.3.1/lib/unicorn.rb:44:in `eval' E, ERROR -- : [snip]/shared/bundle/ruby/1.9.1/gems/unicorn-4.3.1/lib/unicorn.rb:44:in `block in builder' E, ERROR -- : [snip]/shared/bundle/ruby/1.9.1/gems/unicorn-4.3.1/lib/unicorn/http_server.rb:696:in `call' E, ERROR -- : [snip]/shared/bundle/ruby/1.9.1/gems/unicorn-4.3.1/lib/unicorn/http_server.rb:696:in `build_app!' E, ERROR -- : [snip]/shared/bundle/ruby/1.9.1/gems/unicorn-4.3.1/lib/unicorn/http_server.rb:677:in `load_config!' E, ERROR -- : [snip]/shared/bundle/ruby/1.9.1/gems/unicorn-4.3.1/lib/unicorn/http_server.rb:303:in `join' E, ERROR -- : [snip]/shared/bundle/ruby/1.9.1/gems/unicorn-4.3.1/bin/unicorn:121:in `<top (required)>' E, ERROR -- : [snip]/shared/bundle/ruby/1.9.1/bin/unicorn:23:in `load' E, ERROR -- : [snip]/shared/bundle/ruby/1.9.1/bin/unicorn:23:in `<main>' I, INFO -- : reaped #<Process::Status: pid 3182 exit 0> worker=0 I, INFO -- : reaped #<Process::Status: pid 3185 exit 0> worker=1 I, INFO -- : reaped #<Process::Status: pid 3188 exit 0> worker=2 I, INFO -- : reaped #<Process::Status: pid 3191 exit 0> worker=3 I, INFO -- : worker=0 ready I, INFO -- : worker=3 ready I, INFO -- : worker=1 ready I, INFO -- : worker=2 ready Unicorn.rb root = "/home/[user]/apps/[site]/current" working_directory root pid "#{root}/tmp/pids/unicorn.pid" stderr_path "#{root}/log/unicorn.log" stdout_path "#{root}/log/unicorn.log" listen "/tmp/unicorn.[site].sock", :backlog => 2048 worker_processes 4 preload_app true timeout 30 before_fork do |server, worker| defined?(ActiveRecord::Base) and ActiveRecord::Base.connection.disconnect! end after_fork do |server, worker| defined?(ActiveRecord::Base) and ActiveRecord::Base.establish_connection end Any help appreciated - I can pull more config files if required.

  Read the article

• Do all Mac OS X applications require Admin permissions to 'install'?

  - by Andy

  I'm new to the whole Mac OS X operating system. I'm trying to learn and I've got myself a MacBook running Mac OS X 10.7.3. I've created a test user that can not administrate so that I can test out permissions and I've found that I can not do anything in the Applications folder, which includes 'installing' applications (even those drag 'n' drop ones) and creating folders, without entering an Admin name and password. However, I was under the impression that this wasn't the case and you only needed Admin permissions to write to somewhere like Preferences, so can somebody please clarify why it is asking for Admin when I try to drag 'n' drop applications into the Applications folder.

  Read the article

• How to lock Windows7 from installing anything.

  - by Andy

  A family member continually needs me to reinstall his PC after it gets viruses and spyware. He claims that he never downloads anything but evidence suggests otherwise. Unless there is some way that watching 'videos' can get spyware on there. AFAIK the computer is kept up to date. Possible solutions? Make a login where its impossible for him to install anything. Windows 7 standard account doesn't appear to be enough. Is a standard account enough here? I tried this once before and he still seemed to get IE toolbars installed up the wazoo Somehow make an automated image where if he 'messes up' or even on log off the computer restores the whole drive image. Similar to what I've seen in Kinko's Something I've not thought of.... And I know you are all going to say 'stop fixing it you are an enabler'... yes I know but I'm not going to have another fight with my wife over helping her family... right now I'm doing this to keep her happy not the idiot with the 'video' addiction ;-) So the name of the game is minimizing my overhead.

  Read the article

• How to configure emacs by using this file?

  - by Andy Leman

  From http://public.halogen-dg.com/browser/alex-emacs-settings/.emacs?rev=1346 I got: (setq load-path (cons "/home/alex/.emacs.d/" load-path)) (setq load-path (cons "/home/alex/.emacs.d/configs/" load-path)) (defconst emacs-config-dir "~/.emacs.d/configs/" "") (defun load-cfg-files (filelist) (dolist (file filelist) (load (expand-file-name (concat emacs-config-dir file))) (message "Loaded config file:%s" file) )) (load-cfg-files '("cfg_initsplit" "cfg_variables_and_faces" "cfg_keybindings" "cfg_site_gentoo" "cfg_conf-mode" "cfg_mail-mode" "cfg_region_hooks" "cfg_apache-mode" "cfg_crontab-mode" "cfg_gnuserv" "cfg_subversion" "cfg_css-mode" "cfg_php-mode" "cfg_tramp" "cfg_killbuffer" "cfg_color-theme" "cfg_uniquify" "cfg_tabbar" "cfg_python" "cfg_ack" "cfg_scpaste" "cfg_ido-mode" "cfg_javascript" "cfg_ange_ftp" "cfg_font-lock" "cfg_default_face" "cfg_ecb" "cfg_browser" "cfg_orgmode" ; "cfg_gnus" ; "cfg_cyrillic" )) ; enable disabled advanced features (put 'downcase-region 'disabled nil) (put 'scroll-left 'disabled nil) (put 'upcase-region 'disabled nil) ; narrow cursor ;(setq-default cursor-type 'hbar) (cua-mode) ; highlight current line (global-hl-line-mode 1) ; AV: non-aggressive scrolling (setq scroll-conservatively 100) (setq scroll-preserve-screen-position 't) (setq scroll-margin 0) (custom-set-variables ;; custom-set-variables was added by Custom. ;; If you edit it by hand, you could mess it up, so be careful. ;; Your init file should contain only one such instance. ;; If there is more than one, they won't work right. '(ange-ftp-passive-host-alist (quote (("redbus2.chalkface.com" . "on") ("zope.halogen-dg.com" . "on") ("85.119.217.50" . "on")))) '(blink-cursor-mode nil) '(browse-url-browser-function (quote browse-url-firefox)) '(browse-url-new-window-flag t) '(buffers-menu-max-size 30) '(buffers-menu-show-directories t) '(buffers-menu-show-status nil) '(case-fold-search t) '(column-number-mode t) '(cua-enable-cua-keys nil) '(user-mail-address "[email protected]") '(cua-mode t nil (cua-base)) '(current-language-environment "UTF-8") '(file-name-shadow-mode t) '(fill-column 79) '(grep-command "grep --color=never -nHr -e * | grep -v .svn --color=never") '(grep-use-null-device nil) '(inhibit-startup-screen t) '(initial-frame-alist (quote ((width . 80) (height . 40)))) '(initsplit-customizations-alist (quote (("tabbar" "configs/cfg_tabbar.el" t) ("ecb" "configs/cfg_ecb.el" t) ("ange\\-ftp" "configs/cfg_ange_ftp.el" t) ("planner" "configs/cfg_planner.el" t) ("dired" "configs/cfg_dired.el" t) ("font\\-lock" "configs/cfg_font-lock.el" t) ("speedbar" "configs/cfg_ecb.el" t) ("muse" "configs/cfg_muse.el" t) ("tramp" "configs/cfg_tramp.el" t) ("uniquify" "configs/cfg_uniquify.el" t) ("default" "configs/cfg_font-lock.el" t) ("ido" "configs/cfg_ido-mode.el" t) ("org" "configs/cfg_orgmode.el" t) ("gnus" "configs/cfg_gnus.el" t) ("nnmail" "configs/cfg_gnus.el" t)))) '(ispell-program-name "aspell") '(jabber-account-list (quote (("[email protected]")))) '(jabber-nickname "AVK") '(jabber-password nil) '(jabber-server "halogen-dg.com") '(jabber-username "alex") '(remember-data-file "~/Plans/remember.org") '(safe-local-variable-values (quote ((dtml-top-element . "body")))) '(save-place t nil (saveplace)) '(scroll-bar-mode (quote right)) '(semantic-idle-scheduler-idle-time 432000) '(show-paren-mode t) '(svn-status-hide-unmodified t) '(tool-bar-mode nil nil (tool-bar)) '(transient-mark-mode t) '(truncate-lines f) '(woman-use-own-frame nil)) ; ?? ????? ??????? y ??? n? (fset 'yes-or-no-p 'y-or-n-p) (custom-set-faces ;; custom-set-faces was added by Custom. ;; If you edit it by hand, you could mess it up, so be careful. ;; Your init file should contain only one such instance. ;; If there is more than one, they won't work right. '(compilation-error ((t (:foreground "tomato" :weight bold)))) '(cursor ((t (:background "red1")))) '(custom-variable-tag ((((class color) (background dark)) (:inherit variable-pitch :foreground "DarkOrange" :weight bold)))) '(hl-line ((t (:background "grey24")))) '(isearch ((t (:background "orange" :foreground "black")))) '(message-cited-text ((((class color) (background dark)) (:foreground "SandyBrown")))) '(message-header-name ((((class color) (background dark)) (:foreground "DarkGrey")))) '(message-header-other ((((class color) (background dark)) (:foreground "LightPink2")))) '(message-header-subject ((((class color) (background dark)) (:foreground "yellow2")))) '(message-separator ((((class color) (background dark)) (:foreground "thistle")))) '(region ((t (:background "brown")))) '(tooltip ((((class color)) (:inherit variable-pitch :background "IndianRed1" :foreground "black"))))) The above is a python emacs configure file. Where should I put it to use it? And, are there any other changes I need to make?

  Read the article

• Setting up ProxyPass for a Virtualmin virtual server

  - by Andy Ibanez

  I am trying to set up my web server so that I can server multiple Ghost.org blogs. I am stuck in one crucial step. To be honest, my knowledge in servers is not so big, so I request your help to do this. Basically, a tutorial I'm reading suggests I set up a VirtualHost in this way: NameVirtualHost *:80 <VirtualHost *:80> ServerName your-url.com ServerAlias www.your-url.com ProxyRequests off ProxyPass / http://127.0.0.1:2368/ ProxyPassReverse / http:/127.0.0.1:2368/ </VirtualHost> So I have gone to the Virtual site on Virtualmin to try to add everything as is. Services Configure Website Edit Directives The problem is, the previous page (Services Configure website) says I can't edit the port: This Apache virtual host belongs to the Virtualmin server linguist.andyibanez.com, so the address, port, base directory and hostname cannot be changed here. And whenever I try to add the ProxyRequests off (the other two can be added fine) directive in Edit Directives manually, I'm simply told that the directive can't be there. So what is the right way to "add" the last three directives in the VirtualHost above to my sub server? Maybe I'm missing a menu item that will help me with this? I request your help as I have looked for a while, Google keeps thinking I want to serve Webmin via Apache when I google "Set up Virtualmin proxypass", and I have no clue what to do.

  Read the article

• vagrant up command very slow on OS X Lion

  - by Andy Hume

  When I run vagrant up to provision a new VM on Lion it takes an extremely long time, during which the entire Mac is very laggy and unresponsive. The output is as follows, the key point being the "notice: Finished catalog run in 754.28 seconds" > vagrant up [default] Importing base box 'lucid64'... [default] The guest additions on this VM do not match the install version of VirtualBox! This may cause things such as forwarded ports, shared folders, and more to not work properly. If any of those things fail on this machine, please update the guest additions and repackage the box. Guest Additions Version: 4.1.0 VirtualBox Version: 4.1.6 [default] Matching MAC address for NAT networking... [default] Clearing any previously set forwarded ports... [default] Forwarding ports... [default] -- ssh: 22 => 2222 (adapter 1) [default] -- web: 80 => 4567 (adapter 1) [default] Creating shared folders metadata... [default] Running any VM customizations... [default] Booting VM... [default] Waiting for VM to boot. This can take a few minutes. [default] VM booted and ready for use! [default] Mounting shared folders... [default] -- v-root: /vagrant [default] -- v-data: /var/www [default] -- manifests: /tmp/vagrant-puppet/manifests [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: /Stage[main]/Lucid64/Package[apache2]/ensure: ensure changed 'purged' to 'present' [default] [default] notice: /Stage[main]/Lucid64/File[/etc/motd]/ensure: defined content as '{md5}a25e31ba9b8489da9cd5751c447a1741' [default] [default] notice: Finished catalog run in 754.28 seconds [default] [default] err: /File[/var/lib/puppet/rrd]/ensure: change from absent to directory failed: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: change from absent to directory failed: Could not find group puppet [default] [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: Finished catalog run in 2.05 seconds [default] [default] err: /File[/var/lib/puppet/rrd]: Could not evaluate: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: Could not evaluate: Could not find group puppet [default] [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: Finished catalog run in 1.36 seconds [default] [default] err: /File[/var/lib/puppet/rrd]: Could not evaluate: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: Could not evaluate: Could not find group puppet [default] >

  Read the article

• How Do I Enable My Ubuntu Server To Host Various SSL-Enabled Websites?

  - by Andy Ibanez

  Actually, I Have looked around for a few hours now, but I can't get this to work. The main problem I'm having is that only one out of two sites works. I have my website which will mostly be used for an app. It's called atajosapp.com . atajosapp.com will have three main sites: www.atajosapp.com <- Homepage for the app. auth.atajosapp.com <- Login endpoint for my API (needs SSL) api.atajosapp.com <- Main endpoint for my API (needs SSL). If you attempt to access api.atajosapp.com it works. It will throw you a 403 error and a JSON output, but that's fully intentional. If you try to access auth.atajosapp.com however, the site simply doesn't load. Chrome complains with: The webpage at https://auth.atajosapp.com/ might be temporarily down or it may have moved permanently to a new web address. Error code: ERR_TUNNEL_CONNECTION_FAILED But the website IS there. If you try to access www.atajosapp.com or any other HTTP site, it connects fine. It just doesn't like dealing with more than one HTTPS websites, it seems. The VirtualHost for api.atajosapp.com looks like this: <VirtualHost *:443> DocumentRoot /var/www/api.atajosapp.com ServerName api.atajosapp.com SSLEngine on SSLCertificateFile /certificates/STAR_atajosapp_com.crt SSLCertificateKeyFile /certificates/star_atajosapp_com.key SSLCertificateChainFile /certificates/PositiveSSLCA2.crt </VirtualHost> auth.atajosapp.com Looks very similar: <VirtualHost *:443> DocumentRoot /var/www/auth.atajosapp.com ServerName auth.atajosapp.com SSLEngine on SSLCertificateFile /certificates/STAR_atajosapp_com.crt SSLCertificateKeyFile /certificates/star_atajosapp_com.key SSLCertificateChainFile /certificates/PositiveSSLCA2.crt </VirtualHost> Now I have found many websites that talk about possible solutions. At first, I was getting a message like this: _default_ VirtualHost overlap on port 443, the first has precedence But after googling for hours, I managed to solve it by editing both apache2.conf and ports.conf. This is the last thing I added to ports.conf: <IfModule mod_ssl.c> NameVirtualHost *:443 # SSL name based virtual hosts are not yet supported, therefore no # NameVirtualHost statement here NameVirtualHost *:443 Listen 443 </IfModule> Still, right now only api.atajosapp.com and www.atajosapp.com are working. I still can't access auth.atajosapp.com. When I check the error log, I see this: Init: Name-based SSL virtual hosts only work for clients with TLS server name indication support (RFC 4366) I don't know what else to do to make both sites work fine on this. I purchased a Wildcard SSL certificate from Comodo that supposedly secures *.atajosapp.com, so after hours trying and googling, I don't know what's wrong anymore. Any help will be really appreciated. EDIT: I just ran the apachectl -t -D DUMP_VHOSTS command and this is the output. Can't make much sense of it...: root@atajosapp:/# apachectl -t -D DUMP_VHOSTS apache2: Could not reliably determine the server's fully qualified domain name, using atajosapp.com for ServerName [Thu Nov 07 02:01:24 2013] [warn] NameVirtualHost *:443 has no VirtualHosts VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:443 is a NameVirtualHost default server api.atajosapp.com (/etc/apache2/sites-enabled/api.atajosapp.com:1) port 443 namevhost api.atajosapp.com (/etc/apache2/sites-enabled/api.atajosapp.com:1) port 443 namevhost auth.atajosapp.com (/etc/apache2/sites-enabled/auth.atajosapp.com:1) *:80 is a NameVirtualHost default server atajosapp.com (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost atajosapp.com (/etc/apache2/sites-enabled/000-default:1)

  Read the article

• Need help making an ODBC MySQL Connection

  - by Andy Moore

  Short Version: How do I connect from PowerShell to an ODBC 5.1 MySQL Driver? I can't seem to find any connection strings that accurately have a "Provider" field for this particular instance. (See bottom of this question for examples/errors) ===== Long Version: I'm not a server guy, and I've been handed the task of setting up PowerGadgets on our network. I have a MySQL server running on a Linux box, that is configured for remote access and has a user defined for remote access as well. On my windows desktop PC, I have PowerGadgets installed. I installed the MySQL ODBC 5.1 connector, and went to Control Panel Data Sources and set up a User DSN connection to the database. The connection, user, and pass seem to be correct because it lists the tables of the database in my windows control panel. Where I'm running into trouble is in 3 places in PowerGadgets: When selecting a data source, I can select "SQL Server". Inputting the servers IP address does not work and I can't get this option to work at all. When selecting a data source, I can select "OleDB". This screen has a wizard on it, that appears to populate all the correct information (including database table names!) for me. "Test Connection" runs great. But if I try to complete the wizard, I get the error "The .NET Framework data provider for OLEDB does not support the MS Ole DB provider for ODBC Drivers." When selecting a data source, I can select "ODBC". This screen does not have a wizard and I cannot figure out a "connection string" that works. Typically it will respond with the error "The field 'Provider' is missing". Googling ODBC connection strings doesn't reveal any examples with a "provider" field and have no idea what to put in here. The connection string (for #2) above contains "SQLOLEDB" as a provider, and upon inputting that value into this connection string I get the same connection error that #2 gets. I believe I can solve my problems by figuring out a connection string for #3 but don't know where to get started. (PowerGadgets also allows for PowerShell support but I believe I will run into the same problem there) == Here's my current PowerShell connection that doesn't work: invoke-sql -connection "Driver={MySQL ODBC 5.1 Driver};Initial Catalog=hq_live;Data Source=HQDB" -sql "Select * FROM accounts" Spits back the error: "Invoke-Sql : An OLE DB Provider was not specified in the ConnectionString. An example would be, 'Provider=SQLOLEDB;'. == Another string that doesn't work: invoke-sql -connection "Provider=MSDASQL.1;Persist Security Info=False;Data Source=HQDB;Initial Catalog=hq_live" -sql "select * from accounts" And the error: The .Net Framework Data Provider for OLEDB (System.Data.OleDb) does not support the Microsoft OLE DB Provider for ODBC Drivers (MSDASQL). Use the .Net Framework Data Provider for ODBC (System.Data.Odbc).

  Read the article

• aplay analog for darwin?

  - by andy.christianson

  On linux I can play a sound file with the aplay program. I can also send audio data to /dev/dsp in some cases. What is the Darwin analog of the aplay program? I need something that is purely a CLI-based solution.

  Read the article

• Setting MacBook timezone to UTC

  - by Andy A

  To run my web app, I need to set my timezone to UTC on my MacBook. I can do this temporarily by opening a Konsole and entering sudo ln -sf /usr/share/zoneinfo/UTC /etc/localtime However, my timezone returns to normal when I restart my machine! Any advice? Edit : The response to this question by 'Celada' implies that I can just make my Server UTC. I am using Apache Tomcat 7. Adding to Celada's response, how can I make it UTC?

  Read the article

• Gmail and FB is not rendering properly in Firefox

  - by Andy

  I am unable read Gmail in my Firefox browser on my laptop. However, there are no problems when I try to access Gmail on my office desktop. In fact, Gmail renders fine on IE on both computers. Things I have tried: Uninstalling and reinstalling Firefox. Using Firefox 3.6.26 and Firefox 10; same problem. Clearing the cache. But all to no avail. For starters: My background image does not get loaded. It says "Oops. Your selected image failed to load". The buttons for the new look do not get rendered, but when I do a mouse-over I see text which helps me navigate. When I try to read a message, I see the subject line and I see the reply / forward box. The message body does not get rendered, it seems like a styling error. Check this screenshot where the icons in the GMail new look are not rendered properly Check this screenshot where even facebook is not getting rendered properly EDIT: 25th Feb 2012 GMAIL is getting rendered fine in the old look

  Read the article

• How to detect APC UPS battery usage and run a script when on battery

  - by Andy Arismendi

  I have a couple APC UPS - Smart-UPS RT 6000 RM XL Smart-UPS RT 5000 RM XL Unfortunately the power in my office likes to go out (out of my control) and hence the equipment powered by these UPS shuts down. They power a VMware infrastructure environment (VMware Lab Manager) and what I'd like to do is detect when one is on battery (say has been for x amount of time or has x percentage left) and run a script on this event. What software do I need to detect a on-battery event and have it run a script? Thanks!

  Read the article

• ADLDS on Vista SP1

  - by Andy

  I know that Active Directory Lightweight Directory Services (ADLDS) is easily installable on Vista SP2 by the Windows6.0-KB975540-x64.msu update. However, I cant seem to get it working on a Vista SP1 machines I have. Does anyone know how to install ADLDS on Vista SP1 or is it the case that there is nothing like ADLDS / ADAM for Vista SP1? The download page for Windows6.0-KB975540-x64.msu does not clearly define this.

  Read the article

• Adding IP address to OpenVZ VPS (OpenVZ Web Panel)

  - by andy

  I apologise if I sound at all dumb. This is my first dedicated server having used a VPS for over a year and I'm trying to setup a VPS on this new server. I purchased a subnet from my hosting provider that I believe allows me 6 usable IP addresses: 177.xx.xxx.201 - 177.xx.xxx.206 The subnet address looks like this: 177.xx.xxx.200/29. I've gone on my server and added them like it said on a wiki like so: ip addr add 177.**.***.201/29 dev eth0 I done that for all six and now when I go to them in the browser they point to my server. The problem is, I'm using OpenVZ web panel to create VMs (http://code.google.com/p/ovz-web-panel/) so I created a VM and assigned one of those IPs to it. However when SSHing to that IP it SSH's to the dedicated server and not the VM. Am I missing something?

  Read the article

• Service Unavailable - App Pool disabled error...anyone know why?

  - by andy

  Hi guys A small number of our sites intermediately experience an error that is a mystery to us. Our set up is: Windows Server 2003 IIS6 .NET 3.5 We have about 35 Websites running on IIS Each site has it's own App Pool Each App Pool has the identity: Network Service The symptom is: The Application Pool for a site stops, and when you browse to the site, you only see: SERVICE UNAVAILABLE In the Event Logs, we have one Error, that looks like this: Application pool 'AppPool1' is being automatically disabled due to a series of failures in the process(es) serving that application pool. And we have several Warnings leading up to the error, that look like this (note: the warnings look the same, except for the process id): A process serving application pool 'AppPool1' suffered a fatal communication error with the World Wide Web Publishing Service. The process id was '292'. The data field contains the error number. What's causing this? As I said, it doeasn't happen very often....the last time was about 6 months ago...and it usually happens with the same site/App pool. Any ideas? cheers!

  Read the article

• Linux group permissions getting overwritten by owner

  - by Andy

  I am not a user of Linux, but I am encountering some permissions problems with it that I hope someone can shed some light on. Bit of background: A colleague of mine has a Linux box (running Debian I believe) with an SVN repository on it. The repository directory and files 'owner' is my colleauge. We are both members of a group called 'users'. He manages several projects both Linux and Windows apps, while I have one Windows app. For the Windows apps, we both use TortoiseSVN via an SSH link to commit/update. Performing the command 'ls -l' shows the repository files and folders on the Linux box to have the following permissions: -rwxrwx--- john users However, when my colleauge commits to the repository, the permissions change to: -rwxrwx--- john john This then means I get 'Permission denied' when trying to access the repository myself as it appears that the group permissions have been overwritten with only 'owner' permissions. To fix this, a 'chown -R' command is applied to the files/folders to set the permissions back to owner/group, but each time he writes to the repository, the issue repeats. I'm not sure if this is solely an SVN problem, or a more fundamental owner/group issue. Anyone any clue on how to stop this happening, or where to go and look? I'm trying to help out my colleague who is having some trouble resolving this issue. Apologies for the vague info, I hope I have conveyed the problem clear enough. Like I say, I am not a Linux user, I have only put down what I have managed to pick up from looking over his shoulder. Thanks for any pointers I can pass on!

  Read the article

• MSN messenger buddy icon images

  - by Andy White

  Is it possible to access the raw image files for buddy icons in MSN messenger, somewhere on the file system? I have a buddy icon that I would like to use somewhere else, but I'm not sure how to get the actual file.

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >