bobby ortiz - Page 9 - Developer IT

Pointers in For loops

- by Bobby

Quick question: I am a C# guy debugging a C++ app so I am not used to memory management. In the following code: for(int i = 0; i < TlmMsgDB.CMTGetTelemMsgDBCount(); i++) { CMTTelemetryMsgCls* telm = TlmMsgDB.CMTGetTelemetryMsg(i); CMT_SINT32_Tdef id = telm->CMTGetPackingMapID(); ManualScheduleTables.SetManualMsg(i,id); ManualScheduleTables.SetManExec(i,false); } Am I leaking memory every iteration b/c of CMTTelemetryMsgCls* telm = TlmMsgDB.CMTGetTelemetryMsg(i);? The "CMTGetTelemetryMsg(int)" method returns a pointer. Do I have to "delete telm;" at the end of each iteration?

Read the article

Quick-sort doesn't work with middle pivot element

- by Bobby

I am trying to sort an array of elements using quick-sort algorithm.But I am not sure where am I going wrong.I choose the middle element as pivot every time and then I am checking the conditions.Here is my code below. void quicksort(int *temp,int p,int r) { if(r>p+1) { int mid=(p+r)/2; int piv=temp[mid]; int left=p+1; int right=r; while(left < right) { if(temp[left]<=piv) left++; else swap(&temp[left],&temp[--right]); } swap(&temp[--left],&temp[p]); quicksort(temp,p,left); quicksort(temp,right,r); } }

Read the article

Reading a stream in C++

- by Bobby

I have the following code: ifstream initFile; initFile.open("D:\\InitTLM.csv"); if(initFile.is_open()) { // Process file } The file is not opening. The file does exist on the D: drive. Is there a way to find out exactly why this file cannot be found? Like an "errno"?

Read the article

Can I create a two-column layout that fluidly adapts to narrow windows?

- by Brant Bobby

I'm trying to design a page that has two columns of content, div#left and div#right. (I know these aren't proper semantic identifiers, but it makes explaining easier) The widths of both columns are fixed. Desired result - Wide viewport When the viewport is too narrow to display both side-by-side, I want #right to be stacked on top of #left, like this: Desired result - narrow viewport My first thought was simply to apply float: left to #left and float: right to #right, but that makes #right attach itself to the right side of the window (which is the proper behavior for float, after all), leaving an empty space. This also leaves a big gap between the columns when the browser window is really wide. Wrong - div#right is not flush with the left side of the viewport Wrong - div#right is not on top of div#left Applying float: left to both divs would result in the wrong one moving to the bottom when the window was too small. I could probably do this with media queries, but IE doesn't support those until version 9. The source order is unimportant, but I need something that works in IE7 minimum. Is this possible to do without resorting to Javascript?

Read the article

When should I implement IDisposeable?

- by Bobby

What is the best practice for when to implement IDisposeable? Is the best rule of thumb to implement it if you have one managed object in the class, or does it depend if the object was created in the class or just passed in? Should I also do it for classes with no managed objects at all?

Read the article

[picker dismissModalViewControllerAnimated:YES]; not working

- by shishir.bobby

I am using - (void)imagePickerController:(UIImagePickerController *)picker didFinishPickingMediaWithInfo:(NSDictionary *)info { } for imagepicker and using [picker dismissModalViewControllerAnimated:YES]; in iPad to dismiss the picker. also i tried using - (void)imagePickerControllerDidCancel:(UIImagePickerController *)picker;{ [picker dismissModalViewControllerAnimated:YES]; } to dismiss the picker once it done the work. BUt its not dimissing it. when i tap anywhere in the screen, than only it gets dismiss. What i am doing wrong to dismiss the imagepicker? Many thnkas

Read the article

Save all file names in a directory to a vector

- by Bobby

I need to save all ".xml" file names in a directory to a vector. To make a long story short, I cannot use the dirent API. It seems as if C++ does not have any concept of "directories". Once I have the filenames in a vector, I can iterate through and "fopen" these files. Is there an easy way to get these filenames at runtime?

Read the article

How do I configure a mail server for use with JavaMail?

- by bobby

I'm trying to work with the below code: import javax.servlet.*; import javax.servlet.http.*; import java.io.*; import javax.mail.*; import javax.mail.internet.*; // important import javax.mail.event.*; // important import java.net.*; import java.util.*; public class servletmail extends HttpServlet { public void doPost(HttpServletRequest request,HttpServletResponse response) throws ServletException, IOException { PrintWriter out=response.getWriter(); response.setContentType("text/html"); try { Properties props=new Properties(); props.put("mail.smtp.host","localhost"); // 'localhost' for testing Session session1 = Session.getDefaultInstance(props,null); String s1 = request.getParameter("text1"); //sender (from) String s2 = request.getParameter("text2"); String s3 = request.getParameter("text3"); String s4 = request.getParameter("area1"); Message message =new MimeMessage(session1); message.setFrom(new InternetAddress(s1)); message.setRecipients(Message.RecipientType.TO,InternetAddress.parse(s2,false)); message.setSubject(s3); message.setText(s4); Transport.send(message); out.println("mail has been sent"); } catch(Exception ex) { System.out.println("ERROR....."+ex); } } } I'm using mail.jar and activation.jar. But I can't understand how I should configure it with a mail server. Which mail server should I use? Will I be able to send an email using above code? What are the requirements a mail server? How should I configure it?

Read the article

How to have synchronous writing to a file (Threads) ?

- by bobby

Hi all. I created and started some Threads that each one writes something to a common text file. but the following error appears to me: "The process cannot access the file 'C:\hello.txt' because it is being used by another process." void AccessFile() { int num = 5; Thread[] trds = new Thread[5]; for (int i = 0; i < num; i++) { trds[i] = new Thread(new ParameterizedThreadStart(WriteToFile)); } for (int i = 0; i < num; i++) { trds[i].Start(String.Format("{0}: Hello from thread id:#{1}", i, trds[i].ManagedThreadId)); } } void WriteToFile(object message) { string FileName = "C:\\hello.txt"; string mess = (string)message; System.IO.StreamWriter sw = null; FileStream objStream = null; sw = File.AppendText(FileName); if (sw == null) { objStream = new FileStream(FileName, FileMode.OpenOrCreate, FileAccess.ReadWrite, FileShare.ReadWrite); sw = new StreamWriter(objStream); } sw.WriteLine(mess); sw.Close(); sw.Dispose(); } the AccessFile() method is the starting point. could any one tell me what should i do?

Read the article

SVN files edited thru FTP, How do I fix the edited files so they work thru SVN again?

- by Bobby

Basically, a 3rd party analyst we brought on to make some improvements to our site decided to edit files directly on the live server threw FTP. Any time we make changes to those pages threw SVN we have PHP parse errors. Things should be edited threw the SVN and committed. We have our working copies setup so we can edit them how ever we want while having them running under apache for testing. We commit all of our changes to a local repository, then commit from there to the live server. The code on the live server that causes the parse error has " .mine" and " .rxxxx", and my question is, how can I revert those files back to before they were edited thru FTP so I can update them threw SVN again?

Read the article

C++ hash table w/o using STL

- by Bobby

I need to create a hash table that has a key as a string, and value as an int. I cannot use STL containers on my target. Is there a suitable hash table class for this purpose?

Read the article

jQuery: How to get the first “td” in all rows

- by bobby

I have a table, and I want get the first “td” in all rows. My jquery here: $("table.SimpleTable tr td:first-child").css('background-color','red'); and my HTML here: <table class='SimpleTable' border="1" ID="Table1"> <tr> <td>Left</td> <td>Right</td> </tr> <tr> <td>Left</td> <td>Right</td> </tr> <tr> <td>Left</td> <td>Right</td> </tr> <tr> <td>Left</td> <td> <table border="1" ID="Table2"> <tr> <td>AAA</td> <td>AAA</td> <td>AAA</td> </tr> </table> </td> </tr> <tr> <td>Left</td> <td> <table border="1" ID="Table3"> <tr> <td>BBB</td> <td>BBB</td> <td>BBB</td> </tr> </table> </td> </tr> </table> The problem here it get the first "td" in the nested table of the second "td". Please help me!

Read the article

Silverlight Cream for March 31, 2010 -- #826

- by Dave Campbell

In this Issue: Andrea Boschin, Radenko Zec, Andrej Tozon, Bobby Diaz, Brad Abrams, Wolf Schmidt, Colin Eberhardt, Anand Iyer, Matthias Shapiro, Jaime Rodriguez, Bill Reiss, and Lee. Shoutouts: Cigdem has a post up about here MIX10 Interviewing experiences: MIX10 SilverlightShow Interviews Ian T. Lackey has his material up from his talk Silverlight SEO at the St. Louis .Net Users Group Not Silverlight but definitely WP7 cool, Michael Klucher reports that there are New Windows Phone Samples on Creators Club Online Tim Heuer posted a survey: What tools are the minimum to get started in Silverlight? From SilverlightCream.com: A RoleManager to apply roles declaratively to user interface Andrea Boschin also has a new post at SilverlightShow discussing the use of a RoleManager in WCF RIA Services to apply user roles to elements of the UI... good stuff, Andrea. Virtualization in Silverlight 4 RC Radenko Zec has a post out at SilverlightShow where he explains UI and Data Virtualization then gives some examples of their use in Silverlight 4RC, and some issues as well. MS Word Mail Merge with Silverlight 4 COM Automation Andrej Tozon has a post up at SilverlightShow that I missed in the rush of MIX10. He's doing MailMerge with COM automation and Silverlight 4... actually prett cool stuff and all the source! KISS and Tell - MVVM and the ViewModelLocator Bobby Diaz is blogging about a very popular subject right now: ViewModelLocator. He's not showing production code, but it's a thought... check it out. Silverlight 4 + RIA Services - Ready for Business: Validating Data I'm running behind, but Brad Abrams' next post in his series is about validating data in the business application. He also discusses setting up shared code validation. A One-stop Shopping XAML Namespace for Silverlight Client SDK Controls Wolf Schmidt at the Silverlight SDK has a post up highlighting the SL4 XAML namespace prefix. He starts with SL3 then demonstrates the feature's use in SL4. Binding a Silverlight 3 DataGrid to dynamic data via IDictionary (Updated) Colin Eberhardt has an update to his previous article of the same title. This one is a bug fix on an upgrade to SL3 and also an expansion of the previous post. Demo Apps from MIX10 on Windows Phone 7 Anand Iyer posted links to all the WP7 demos used at MIX10 and at least in the case of FourSquare, the source is on CodePlex. XAML Files for Location Visualizations in Silverlight and WPF Matthias Shapiro has graciously provided XAML for us for Silverlight and WPF for a bunch of different US maps... too cool, now we don't have to be asking 'where did you get that map?'... thanks Matthias! Theming in Windows Phone Jaime Rodriguez has a post up that deep-dives theming in general and demonstrates using it on WP7... end-user configurations and developer stuff. Space Rocks game step 7: Moving the ship It appears that in the heat of battle (blogging) I said Bill Reiss' Space Rocks game he's building is for WP7... obviously it's not, but it's a game folks... :) THis is Episode 7 and he's moving the ship now. SL4(RC) RichTextBox and Access Violation Lee has some code that looks like it should work for a RichTextBox in SL4RC, and it's throwing an error... see if you have a solution for him... or is it a bug? Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

MySQL: Request to select the last 10 send/received messages to/by different users

- by Yako malin

I want to select the 10 last messages you received OR you sent TO different users. For example the results must be shown like that: 1. John1 - last message received 04/17/10 3:12 2. Thomy - last message sent 04/16/10 1:26 3. Pamela - last message received 04/12/10 3:51 4. Freddy - last message received 03/28/10 9:00 5. Jack - last message sent 03/20/10 4:53 6. Tom - last message received 02/01/10 7:41 ..... Table looks like: CREATE TABLE `messages` ( `id` int(11) NOT NULL AUTO_INCREMENT, `time` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP, `sender` int(11) DEFAULT NULL, `receiver` int(11) DEFAULT NULL, `content` text ) I think Facebook (and the iPhone) use this solution. When you go to your mail box, you have the last messages received/sent grouped by Users (friends). So I will take an example. If I have theses messages (THEY ARE ORDERED YET): **Mike** **Tom** **Pam** Mike Mike **John** John Pam **Steve** **Bobby** Steve Steve Bobby Only Message with ** should be returned because they are the LAST messages I sent/received By User. In fact I want the last message of EACH discussion. What is the solution?

Read the article

Can you say "Architect?"

- by Bob Rhubart

Photo by Jennifer Ortiz In his article, It's Time To Occupy IT, AIIM CEO and president John Mancini examines the evolution of "Systems of Engagement," the social technologies that are transforming how customers and employees relate to and interact with companies. Surviving the disruption that transformation entails is a matter of when, rather than if, a given organization embraces the change. But as Mancini points out, that transformation will require a "new breed" of IT professional: "While addressing this kind of challenge requires technical skills, it also requires process and customer acumen more often found in the business than in our IT departments. It requires a new type of information professional, whose expertise includes technical and domain knowledge, but who also has an idea of how the pieces of a process that spans the worlds of Systems of Record and Systems of Engagement should fit together. Gartner estimates that the demand for this new breed of information professional will grow by 50 percent by 2015." Though Mancini makes no reference to the title, the skills he desribes are those of the IT architect. While the specific definition of the role remains fodder for seemingly endless discussion and debate on various social networks and forums, the fact remains that the skills required for success in the evolving world of IT will increasingly involve a deep understanding of how all the pieces fit together.

Read the article

SQL Saturday #220 - Atlanta - Pre-Con Scholarship Winners!

- by Most Valuable Yak (Rob Volk)

A few weeks ago, AtlantaMDF offered scholarships for each of our upcoming Pre-conference sessions at SQL Saturday #220. We would like to congratulate the winners! David Thomas SQL Server Security http://sqlsecurity.eventbrite.com/ Vince Bible Surfing the Multicore Wave: Processors, Parallelism, and Performance http://surfmulticore.eventbrite.com/ Mostafa Maged Languages of BI http://languagesofbi.eventbrite.com/ Daphne Adams Practical Self-Service BI with PowerPivot for Excel http://selfservicebi.eventbrite.com/ Tim Lawrence The DBA Skills Upgrade Toolkit http://dbatoolkit.eventbrite.com/ Thanks to everyone who applied! And once again we must thank Idera's generous sponsorship, and the time and effort made by Bobby Dimmick (w|t) and Brian Kelley (w|t) of Midlands PASS for judging all the applicants. Don't forget, there's still time to attend the Pre-Cons on May 17, 2013! Click on the EventBrite links for more details and to register!

Read the article

Take Camera Phone Macro Photos with a Cheap Laser Pointer Lens

- by Jason Fitzpatrick

Inside those cheap laser pointers you see in the grocery store checkout line there’s a handy little plastic lens that, when slapped on your phone’s camera, makes it easy to take macro photographs. In this tutorial, they take the lens from a laser point and secure it using tape and a bobby pin. An alternative method to achieve the same end (and with a higher quality lens) is to dismantle a CD/DVD drive to source the lens and use painter’s tape to hold the lens in place–this is the technique I used several years ago, check out the tutorial video here. Laser Pointer Macro Lens [via Apartment Therapy] How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It

Read the article

Making an Excel file into a link in VBA.

- by Edmond

Mvalue = MonthName(5, True) fileL = \bobby\outside\" myFile = fileL & Mvalue & Right(Year(Date), 2) & "\Goodbye - " & myfdate & ".xls" Set omail = CreateItem(olMailItem) With omail .Subject = "Hello" .BodyFormat = olFormatHTML .HTMLBody = myFile How do I make the.HTMLBody = myFile, into a link within the email that will be sent out

Read the article

Configure ASP.NET Application to Read Mapped Network Drive

- by Bob

Is it possible to configure an ASP.NET application under IIS 7 so it can read files stored in a mapped network drive? I'm not trying to serve up the contents of the drive. I simply need to read the contents within the ASP.NET application. I've searched the Web and haven't really found a solid answer. The questions in my mind are: Is this possible via configuration (i.e. I cannot modify the client code)? If so, what are the step by step instructions. If it is not possible, I'm fine with that. I already know UNC paths work but using them drastically changes the work flow. Thanks! Bobby

Read the article

Multiple synonym dictionary matches in PostgreSQL full text searching

- by Ryan VanMiddlesworth

I am trying to do full text searching in PostgreSQL 8.3. It worked splendidly, so I added in synonym matching (e.g. 'bob' == 'robert') using a synonym dictionary. That works great too. But I've noticed that it apparently only allows a word to have one synonym. That is, 'al' cannot be 'albert' and 'allen'. Is this correct? Is there any way to have multiple dictionary matches in a PostgreSQL synonym dictionary? For reference, here is my sample dictionary file: bob robert bobby robert al alan al albert al allen And the SQL that creates the full text search config: CREATE TEXT SEARCH DICTIONARY nickname (TEMPLATE = synonym, SYNONYMS = nickname); CREATE TEXT SEARCH CONFIGURATION dxp_name (COPY = simple); ALTER TEXT SEARCH CONFIGURATION dxp_name ALTER MAPPING FOR asciiword WITH nickname, simple; What am I doing wrong? Thanks!

Read the article

Creating a loop that will edit 60 TextBox names?

- by Darkmage

text box set1 = 1 to 30 = in the query name = br1id to br30id textbox set 2 = 1 to 30 = in the result output i dont understand how to create a loop based on 30 diffrent textbox names? i cant copy paste these lines 30 times editing the textbox names, that wold just look wrong. try { MySqlConnection mysqlCon = new MySqlConnection( "server= 195.159.253.229;" + "Database = bruker;" + "user id=bobby;" + "password=LoLOW###;"); MySqlCommand cmd1 = new MySqlCommand( "SELECT brukernavn From bruker where ID = '" + br1id.Text + "';", mysqlCon); mysqlCon.Open(); navX[0] = cmd1.ExecuteScalar().ToString(); br1txt3.Text = navX[0]; }

Read the article

Range annotation between nothing and 100?

- by aticatac

Hi I have a [Range] annotation that looks like this: [Range(0, 100)] public int AvailabilityGoal { get; set; } It works as it should, I can only enter values between 0 and 100 but I also want the input box to be optional, the user shouldn't get an validation error if the input box is empty. If the user leaves it empty it should make AvailabilityGoal = 0 but I don't want to force the user to enter a zero. I tried this but it (obviously) didn't work: [Range(typeof(int?), null, "100")] Is it possible to solve this with Data Annotations or in some other way? Thanks in advance. Bobby

Read the article

how to create Codeigniter route that doesn't override the other controller routes?

- by bakazero

I've got a lot controller in my Codeigniter apps, ex: Signup, Profile, Main, etc.. Now I want to build "User" controller. what I want: if people goes to url: example.com/signup, I want use default route to "Signup" Controller if people goes to url: example.com/bobby.ariffin, I want to reroute this to "User" Controller because the url not handled by any Controller in my apps. I had create this in my config/routes.php: $route['(:any)'] = "user/$1"; but it's override all the route in my apps to "User" Controller. Is there any simple route for Codeigniter that doesn't override the other controller routes?

Read the article

Aptronyms: fitting the profession to the name

- by Tony Davis

Writing a recent piece on the pains of index fragmentation, I found myself wondering why, in SQL Server, you can’t set the equivalent of a fill factor, on a heap table. I scratched my head…who might know? Phil Factor, of course! I approached him with a due sense of optimism only to find that not only did he not know, he also didn’t seem to care much either. I skulked off thinking how this may be the final nail in the coffin of nominative determinism. I’ve always wondered if there was anything in it, though. If your surname is Plumb or Leeks, is there even a tiny, extra percentage chance that you’ll end up fitting bathrooms? Some examples are quite common. I’m sure we’ve all met teachers called English or French, or lawyers called Judge or Laws. I’ve also known a Doctor called Coffin, a Urologist called Waterfall, and a Dentist called Dentith. Two personal favorites are Wolfgang Wolf who ended up managing the German Soccer team, Wolfsburg, and Edmund Akenhead, a Crossword Editor for The Times newspaper. Having forgiven Phil his earlier offhandedness, I asked him for if he knew of any notable examples. He had met the famous Dr. Batty and Dr. Nutter, both Psychiatrists, knew undertakers called Death and Stiff, had read a book by Frederick Page-Turner, and suppressed a giggle at the idea of a feminist called Gurley-Brown. He even managed to better my Urologist example, citing the article on incontinence in the British Journal of Urology (vol.49, pp.173-176, 1977) by A. J. Splatt and D. Weedon. What, however, if you were keen to gently nudge your child down the path to a career in IT? What name would you choose? Subtlety probably doesn’t really work, although in a recent interview, Rodney Landrum did congratulate PowerShell MVP Max Trinidad on being named after a SQL function. Grant “The Memory” Fritchey (OK, I made up that nickname) doesn’t do badly either. Some surnames, seem to offer a natural head start, although I know of no members of the Page-Reid clan in the profession. There are certainly families with the Table surname, although sadly, Little Bobby Tables was merely a legend by xkcd. A member of the well-known Key family would need to name their son Primary, or maybe live abroad, to make their mark. Nominate your examples of people seemingly destined, by name, for their chosen profession (extra points for IT). The best three will receive a prize. Cheers, Tony.

Read the article

Configuring Fed Authentication Methods in OIF / IdP

- by Damien Carru

In this article, I will provide examples on how to configure OIF/IdP to map OAM Authentication Schemes to Federation Authentication Methods, based on the concepts introduced in my previous entry. I will show examples for the three protocols supported by OIF: SAML 2.0 SSO SAML 1.1 SSO OpenID 2.0 Enjoy the reading! Configuration As I mentioned in my previous article, mapping Federation Authentication Methods to OAM Authentication Schemes is protocol dependent, since the methods are defined in the various protocols (SAML 2.0, SAML 1.1, OpenID 2.0). As such, the WLST commands to set those mappings will involve: Either the SP Partner Profile and affect all Partners referencing that profile, which do not override the Federation Authentication Method to OAM Authentication Scheme mappings Or the SP Partner entry, which will only affect the SP Partner It is important to note that if an SP Partner is configured to define one or more Federation Authentication Method to OAM Authentication Scheme mappings, then all the mappings defined in the SP Partner Profile will be ignored. WLST Commands The two OIF WLST commands that can be used to define mapping Federation Authentication Methods to OAM Authentication Schemes are: addSPPartnerProfileAuthnMethod() to define a mapping on an SP Partner Profile, taking as parameters: The name of the SP Partner Profile The Federation Authentication Method The OAM Authentication Scheme name addSPPartnerAuthnMethod() to define a mapping on an SP Partner , taking as parameters: The name of the SP Partner The Federation Authentication Method The OAM Authentication Scheme name Note: I will discuss in a subsequent article the other parameters of those commands. In the next sections, I will show examples on how to use those methods: For SAML 2.0, I will configure the SP Partner Profile, that will apply all the mappings to SP Partners referencing this profile, unless they override mapping definition For SAML 1.1, I will configure the SP Partner. For OpenID 2.0, I will configure the SP/RP Partner SAML 2.0 Test Setup In this setup, OIF is acting as an IdP and is integrated with a remote SAML 2.0 SP partner identified by AcmeSP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Use BasicScheme as the Authentication Scheme Map BasicSessionScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:Password Federation Authentication Method Use OAMLDAPPluginAuthnScheme as the Authentication Scheme Map OAMLDAPPluginAuthnScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. Also the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via FORM, OIF/IdP would issue an Assertion similar to: <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> BasicScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner Profile to BasicScheme instead of LDAPScheme. I will use the OIF WLST setSPPartnerProfileDefaultScheme() command and specify which scheme to be used as the default for the SP Partner Profile referenced by AcmeSP (which is saml20-sp-partner-profile in this case: getFedPartnerProfile("AcmeSP", "sp") ): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerProfileDefaultScheme() command:setSPPartnerProfileDefaultScheme("saml20-sp-partner-profile", "BasicScheme") Exit the WLST environment:exit() The user will now be challenged via HTTP Basic Authentication defined in the BasicScheme for AcmeSP. Also, as noted earlier, the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via HTTP Basic Authentication, OIF/IdP would issue an Assertion similar to: <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> Mapping BasicScheme To change the Federation Authentication Method mapping for the BasicScheme to urn:oasis:names:tc:SAML:2.0:ac:classes:Password instead of urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport for the saml20-sp-partner-profile SAML 2.0 SP Partner Profile (the profile to which my AcmeSP Partner is bound to), I will execute the addSPPartnerProfileAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerProfileAuthnMethod() command:addSPPartnerProfileAuthnMethod("saml20-sp-partner-profile", "urn:oasis:names:tc:SAML:2.0:ac:classes:Password", "BasicScheme") Exit the WLST environment:exit() After authentication via HTTP Basic Authentication, OIF/IdP would now issue an Assertion similar to (see that the AuthnContextClassRef was changed from PasswordProtectedTransport to Password): <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:Password </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> OAMLDAPPluginAuthnScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner Profile to OAMLDAPPluginAuthnScheme instead of BasicScheme. I will use the OIF WLST setSPPartnerProfileDefaultScheme() command and specify which scheme to be used as the default for the SP Partner Profile referenced by AcmeSP (which is saml20-sp-partner-profile in this case: getFedPartnerProfile("AcmeSP", "sp") ): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerProfileDefaultScheme() command:setSPPartnerProfileDefaultScheme("saml20-sp-partner-profile", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() The user will now be challenged via FORM defined in the OAMLDAPPluginAuthnScheme for AcmeSP. Contrarily to LDAPScheme and BasicScheme, the OAMLDAPPluginAuthnScheme is not mapped by default to any Federation Authentication Methods. As such, OIF/IdP will not be able to find a Federation Authentication Method and will set the method in the SAML Assertion to the OAM Authentication Scheme name. After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthnContextClassRef set to OAMLDAPPluginAuthnScheme): <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> OAMLDAPPluginAuthnScheme </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> Mapping OAMLDAPPluginAuthnScheme To add the OAMLDAPPluginAuthnScheme to the Federation Authentication Method urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport mapping, I will execute the addSPPartnerProfileAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerProfileAuthnMethod() command:addSPPartnerProfileAuthnMethod("saml20-sp-partner-profile", "urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from OAMLDAPPluginAuthnScheme to PasswordProtectedTransport): <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> SAML 1.1 Test Setup In this setup, OIF is acting as an IdP and is integrated with a remote SAML 1.1 SP partner identified by AcmeSP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Use OAMLDAPPluginAuthnScheme as the Authentication Scheme Map OAMLDAPPluginAuthnScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method Use LDAPScheme as the Authentication Scheme Map LDAPScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. Also the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:1.0:am:password to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via FORM, OIF/IdP would issue an Assertion similar to: <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> OAMLDAPPluginAuthnScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner to OAMLDAPPluginAuthnScheme instead of LDAPScheme. I will use the OIF WLST setSPPartnerDefaultScheme() command and specify which scheme to be used as the default for the SP Partner: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerDefaultScheme() command:setSPPartnerDefaultScheme("AcmeSP", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() The user will be challenged via FORM defined in the OAMLDAPPluginAuthnScheme for AcmeSP. Contrarily to LDAPScheme, the OAMLDAPPluginAuthnScheme is not mapped by default to any Federation Authentication Methods (in the SP Partner Profile). As such, OIF/IdP will not be able to find a Federation Authentication Method and will set the method in the SAML Assertion to the OAM Authentication Scheme name. After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthenticationMethod set to OAMLDAPPluginAuthnScheme): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="OAMLDAPPluginAuthnScheme"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> Mapping OAMLDAPPluginAuthnScheme To map the OAMLDAPPluginAuthnScheme to the Federation Authentication Method urn:oasis:names:tc:SAML:1.0:am:password for this SP Partner only, I will execute the addSPPartnerAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeSP", "urn:oasis:names:tc:SAML:1.0:am:password", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from OAMLDAPPluginAuthnScheme to password): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> LDAPScheme as Authentication Scheme I will now show that by defining a Federation Authentication Mapping at the Partner level, this now ignores all mappings defined at the SP Partner Profile level. For this test, I will switch the default Authentication Scheme for this SP Partner back to LDAPScheme, and the Assertion issued by OIF/IdP will not be able to map this LDAPScheme to a Federation Authentication Method anymore, since A Federation Authentication Method mapping is defined at the SP Partner level and thus the mappings defined at the SP Partner Profile are ignored The LDAPScheme is not listed in the mapping at the Partner level I will use the OIF WLST setSPPartnerDefaultScheme() command and specify which scheme to be used as the default for this SP Partner: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerDefaultScheme() command:setSPPartnerDefaultScheme("AcmeSP", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthenticationMethod set to LDAPScheme): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="LDAPScheme"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> Mapping LDAPScheme at Partner Level To fix this issue, we will need to add the LDAPScheme to the Federation Authentication Method urn:oasis:names:tc:SAML:1.0:am:password mapping for this SP Partner only. I will execute the addSPPartnerAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeSP", "urn:oasis:names:tc:SAML:1.0:am:password", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from LDAPScheme to password): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> OpenID 2.0 In the OpenID 2.0 flows, the RP must request use of PAPE, in order for OIF/IdP/OP to include PAPE information. For OpenID 2.0, the configuration will involve mapping a list of OpenID 2.0 policies to a list of Authentication Schemes. The WLST command will take a list of policies, delimited by the ',' character, instead of SAML 2.0 or SAML 1.1 where a single Federation Authentication Method had to be specified. Test Setup In this setup, OIF is acting as an IdP/OP and is integrated with a remote OpenID 2.0 SP/RP partner identified by AcmeRP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Map LDAPScheme to the http://schemas.openid.net/pape/policies/2007/06/phishing-resistant and http://openid-policies/password-protected policies Federation Authentication Methods (the second one is a custom for this use case) LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. No Federation Authentication Method is defined OOTB for OpenID 2.0, so if the IdP/OP issue an SSO response with a PAPE Response element, it will specify the scheme name instead of Federation Authentication Methods After authentication via FORM, OIF/IdP would issue an SSO Response similar to: https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=LDAPScheme&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D Mapping LDAPScheme To map the LDAP Scheme to the http://schemas.openid.net/pape/policies/2007/06/phishing-resistant and http://openid-policies/password-protected policies Federation Authentication Methods, I will execute the addSPPartnerAuthnMethod() method (the policies will be comma separated): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeRP", "http://schemas.openid.net/pape/policies/2007/06/phishing-resistant,http://openid-policies/password-protected", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from LDAPScheme to the two policies): https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=http%3A%2F%2Fschemas.openid.net%2Fpape%2Fpolicies%2F2007%2F06%2Fphishing-resistant+http%3A%2F%2Fopenid-policies%2Fpassword-protected&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D In the next article, I will cover how OIF/IdP can be configured so that an SP can request a specific Federation Authentication Method to challenge the user during Federation SSO.Cheers,Damien Carru

Search Results

Search found 233 results on 10 pages for 'bobby ortiz'.

Page 9/10 | < Previous Page | 5 6 7 8 9 10 | Next Page >

- by Bobby

- by Bobby

- by Bobby

- by Brant Bobby

- by Bobby

- by shishir.bobby

- by Bobby

- by bobby

- by bobby

- by Bobby

- by Bobby

- by bobby

- by Dave Campbell

- by Yako malin

- by Bob Rhubart

- by Most Valuable Yak (Rob Volk)

- by Jason Fitzpatrick

- by Edmond

- by Bob

- by Ryan VanMiddlesworth

- by Darkmage

- by aticatac

- by bakazero

- by Tony Davis

- by Damien Carru

< Previous Page | 5 6 7 8 9 10 | Next Page >