Search Results

Search found 1218 results on 49 pages for 'derek lo'.

Page 9/49 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• Wireless disabled after connecting ethernet cable

  - by user1716672

  Im using Linux Mint 13. Wireless has always worked fine but stopped yesterday after I connected to the internet via an ethernet cable. I ran: sudo rfkill list gives me: 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no sudo rfkill unblock 0 sudo rfkill list gives me 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no sudo service networking start results in: networking stop/waiting The contents of /etc/network/interfaces is auto lo iface lo inet loopback Any ideas what I can do?

  Read the article

• VirtualBox 4.1.12 Ubuntu Host Bridged Networking

  - by hidden_premise

  Setup Ubuntu Server 11.10 x64 VirtualBox 4.1.12 One network adapter eth0 with a static IP address My /etc/network/interfaces looks like #Local loopback auto lo iface lo inet loopback #Primary Interface auto eth0 iface eth0 inet static address 10.0.0.6 netmask 255.255.255.0 gateway 10.0.0.1 Need Static IP for Ubuntu Host Static IP for multiple Ubuntu guests My attempt Downloaded the .deb for 64bit virtual box dpkg -i virtualbox.deb Create a VM and install ubuntu server 11.10 x64 from ISO Set the networking mode to bridged and choose 'eth0' as the interface Fail. None of the guides I can find for bridged networking work because everything changed since vbox 2

  Read the article

• LXC container can only access host via bridge

  - by vitaut

  I have an LXC container with i686 Ubuntu 12.04 running on a x86_64 Ubuntu 12.04 host. I've set up a bridge using instructions here. However the ping from the container only goes through to the host and not to other machines on the local network. Similarly only the host and not the other machines see the container OS. The host's /etc/network/interfaces file looks as follows: auto lo iface lo inet loopback iface eth0 inet manual auto br0 iface br0 inet dhcp bridge_ports eth0 bridge_fd 0 bridge_maxwait 0 The container's /etc/network/interfaces file looks as follows: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp And here's the relevant part of the container's config: lxc.network.type=veth lxc.network.link=br0 lxc.network.flags=up Any ideas what I'm doing wrong? Additional info: The output of iptables-save on host: $ sudo iptables-save # Generated by iptables-save v1.4.12 on Sat Oct 26 06:06:48 2013 *filter :INPUT ACCEPT [6854:721708] :FORWARD ACCEPT [4067:538895] :OUTPUT ACCEPT [4967:522405] COMMIT # Completed on Sat Oct 26 06:06:48 2013 # Generated by iptables-save v1.4.12 on Sat Oct 26 06:06:48 2013 *nat :PREROUTING ACCEPT [82235:21547307] :INPUT ACCEPT [16:1070] :OUTPUT ACCEPT [9386:583359] :POSTROUTING ACCEPT [14693:1291952] -A POSTROUTING -s 10.0.3.0/24 ! -d 10.0.3.0/24 -j MASQUERADE COMMIT # Completed on Sat Oct 26 06:06:48 2013 The output of brctl show on host: $ brctl show bridge name bridge id STP enabled interfaces br0 8000.080027409684 no eth0 vethBkwWyV The output of ifconfig br0 on host: $ ifconfig br0 br0 Link encap:Ethernet HWaddr 08:00:27:40:96:84 inet addr:192.168.1.11 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe40:9684/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:232863 errors:0 dropped:0 overruns:0 frame:0 TX packets:59518 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:34437354 (34.4 MB) TX bytes:198492871 (198.4 MB) The output of ifconfig eth0 on host: $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 08:00:27:40:96:84 inet6 addr: fe80::a00:27ff:fe40:9684/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:299419 errors:0 dropped:0 overruns:0 frame:0 TX packets:203569 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:59077446 (59.0 MB) TX bytes:372056540 (372.0 MB) The output of ifconfig eth0 on container: $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:16:3e:74:08:2b inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::216:3eff:fe74:82b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:81 errors:0 dropped:0 overruns:0 frame:0 TX packets:113 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8506 (8.5 KB) TX bytes:9021 (9.0 KB)

  Read the article

• How can I force all internet traffic over a PPTP VPN but still allow local lan access?

  - by user126715

  I have a server running Linux Mint 12 that I want to keep connected to a PPTP VPN all the time. The VPN server is pretty reliable, but it drops on occasion so I just want to make it so all internet activity is disabled if the VPN connection is broken. I'd also like to figure out a way to restart it automatically, but that's not as big of an issue since this happens pretty rarely. I also want to always be able to connect to the box from my lan, regardless of whether the VPN is up or not. Here's what my ifconfig looks like with the VPN connected properly: eth0 Link encap:Ethernet HWaddr 00:22:15:21:59:9a inet addr:192.168.0.171 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::222:15ff:fe21:599a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37389 errors:0 dropped:0 overruns:0 frame:0 TX packets:29028 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:37781384 (37.7 MB) TX bytes:19281394 (19.2 MB) Interrupt:41 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1446 errors:0 dropped:0 overruns:0 frame:0 TX packets:1446 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:472178 (472.1 KB) TX bytes:472178 (472.1 KB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.10.11.10 P-t-P:10.10.11.9 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:23 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:1368 (1.3 KB) TX bytes:1812 (1.8 KB) Here's an iptables script I found elsewhere that seemed to be for the problem I'm trying to solve, but it wound up blocking all access, but I'm not sure what I need to change: #!/bin/bash #Set variables IPT=/sbin/iptables VPN=`ifconfig|perl -nE'/dr:(\S+)/&&say$1'|grep 10.` LAN=192.168.0.0/24 #Flush rules $IPT -F $IPT -X #Default policies and define chains $IPT -P OUTPUT DROP $IPT -P INPUT DROP $IPT -P FORWARD DROP #Allow input from LAN and tun0 ONLY $IPT -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT $IPT -A INPUT -i lo -j ACCEPT $IPT -A INPUT -i tun0 -m conntrack --ctstate NEW -j ACCEPT $IPT -A INPUT -s $LAN -m conntrack --ctstate NEW -j ACCEPT $IPT -A INPUT -j DROP #Allow output from lo and tun0 ONLY $IPT -A OUTPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT $IPT -A OUTPUT -o lo -j ACCEPT $IPT -A OUTPUT -o tun0 -m conntrack --ctstate NEW -j ACCEPT $IPT -A OUTPUT -d $VPN -m conntrack --ctstate NEW -j ACCEPT $IPT -A OUTPUT -j DROP exit 0 Thanks for your help.

  Read the article

• Ubuntu 11.10 firewall/gateway - no client internet access

  - by Siriss

  I have read many other posts but cannot figure this out. eth0 is my external connected to a Comcast modem. The server has internet access with no issues. eth1 is internal and running DHCP for the clients. I have DHCP working just fine, all my clients can get an IP and ping the server but they cannot access the internet. I am using ISC-DHCP-SERVER and have set /etc/default/isc-dhcp-server to INTERFACE="eht1" Here is my dhcpd.conf file located in /etc/dhcp/dhcpd.conf ddns-update-style interim; ignore client-updates; subnet 10.0.10.0 netmask 255.255.255.0 { range 10.0.10.10 10.0.10.200; option routers 10.0.10.2; option subnet-mask 255.255.255.0; option domain-name-servers 208.67.222.222, 208.67.220.220; #OpenDNS # option domain-name "example.com"; default-lease-time 21600; max-lease-time 43200; authoritative; } I have made the *net.ipv4.ip_forward=1* change in /etc/sysctl.conf here is my interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp iface eth1 inet static address 10.0.10.2 netmask 255.255.255.0 network 10.0.10.0 auto eth1 And finally- here is my iptables.conf file: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *nat :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.0.10.0/24 -o eth0 -j MASQUERADE #-A PREROUTING -i eth0 -p tcp --dport 59668 -j DNAT --to-destination 10.0.10.2:59668 COMMIT *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i eth1 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 53 -j ACCEPT -A INPUT -m state --state NEW -m udp -p udp --dport 53 -j ACCEPT -A FORWARD -s 10.0.10.0/24 -o eth0 -j ACCEPT -A FORWARD -d 10.0.10.0/24 -m state --state ESTABLISHED,RELATED -i eth0 -j ACCEPT -A FORWARD -p icmp -j ACCEPT -A FORWARD -i lo -j ACCEPT -A FORWARD -i eth1 -j ACCEPT #-A FORWARD -i eth0 -m state --state NEW -m tcp -p tcp -d 10.0.10.2 --dport 59668 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT I am completely stuck. I cannot figure out why the clients cannot access the internet. Am I missing a service? Is a service not running? Any help would be greatly appreciated. I tried to be as thorough as possible but please let me know if I have missed something. Thank you!

  Read the article

• Conflicting ip routes with local table on attaching a virtual network interface

  - by user1071840

  I have an EC2 instance with these ip rules: $ sudo ip rule show 0: from all lookup local 32766: from all lookup main 32767: from all lookup default I can attach an elastic network interface to it with a private IP. Say the IP of my machine is 10.1.3.12 and the IP of the interface is 10.1.1.190. As soon as I attach the interface to my machine a new entry is added to the routing policy and local routing table: sudo ip rule show 0: from all lookup local 32765: from 10.1.1.190 lookup 10003 32766: from all lookup main 32767: from all lookup default $ sudo ip route show table local broadcast 10.1.1.0 dev eth3 proto kernel scope link src 10.1.1.190 local 10.1.1.190 dev eth3 proto kernel scope host src 10.1.1.190 broadcast 10.1.1.255 dev eth3 proto kernel scope link src 10.1.1.190 broadcast 10.1.3.0 dev eth0 proto kernel scope link src 10.1.3.12 local 10.1.3.12 dev eth0 proto kernel scope host src 10.1.3.12 broadcast 10.1.3.255 dev eth0 proto kernel scope link src 10.1.3.12 broadcast 127.0.0.0 dev lo proto kernel scope link src 127.0.0.1 local 127.0.0.0/8 dev lo proto kernel scope host src 127.0.0.1 local 127.0.0.1 dev lo proto kernel scope host src 127.0.0.1 broadcast 127.255.255.255 dev lo proto kernel scope link src 127.0.0.1 I can send traffic to this ENI directly from a host that can have the same IP as the host the ENI is attached to. This is where the problem starts. I ran tcpdump on the port in question and saw multiple SYNs going to the ENI with src '10.1.3.12' and destination '10.1.1.190' but didn't see even a single ACK. In my understanding if ACKs were being sent from the ENI they'd have destination as 10.1.3.12 i.e. the same as the local machine's IP and such packets will now be routed as local packets matching local routing policy: local 10.1.3.12 dev eth0 proto kernel scope host src 10.1.3.12 I'd like to send all the packets originating from 10.1.1.190 (my ENI) to go back on the same interface i.e. eth3 in this case. Contents of the nee table 10003 are: $ sudo ip route show table 10003 default via 10.1.1.1 dev eth3 I think I can do the following: I don't know if its possible but probably decrease the priority of local table so the packets match the table 10003. Use iptables to mangle these packets and update the local table route to include the mark information But I'm not sure if these are the right approaches.

  Read the article

• debian lenny : problem modifying static ip

  - by supertiti

  hello all, i'm trying to change a static ip assigned to a debian VM. I modified the /etc/network/interfaces file but my debian doesn't seem to like the new settings currently the machine's ip is set to 192.168.1.136 and i want the machine's ip to be set to 192.168.1.8 here's my modified /etc/network/interfaces : auto lo iface lo inet loopback allow-hotplug eth0 auto eth0 iface eth0 inet static address 192.168.1.8 gateway 192.168.1.1 netmask 255.255.255.0

  Read the article

• UPDATE from SELECT complains about more that one value returned

  - by Álvaro G. Vicario

  I have this data structure: request ======= building_id lot_code building ======== building_id lot_id lot === lot_id lot_code The request table is missing the value for the building_id column and I want to fill it in from the other tables. So I've tried this: UPDATE request SET building_id = ( SELECT bu.building_id FROM building bu INNER JOIN lot lo ON bu.lot_id=lo.lot_id WHERE lo.lot_code = request.lot_code ); But I'm getting this error: Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , , = or when the subquery is used as an expression. Is it due to wrong syntax? The data model allows more than one building per lot but actual data doesn't contain such cases so there should be at most one building_id per lot_code.

  Read the article

• How to write content in a text file at the end of each line

  - by saravanan

  Hi, I am having one text file which contain following kind of data. "3P","Smith","Richard","3 Point Promotions","3P","[email protected]","IDA","Yes",,,,0,4,5,83.33,10, "A1","Ernest","Amy","TAKE 1 Promotional Products","LCOOK","[email protected]","IDA","Yes",,,,0,6,7,,0, "A2","Derek","Eaton","Advertising Edge Promotions","AE","[email protected]","IDA","Yes",,,,0,8,8,,10, "AAA","Abercrombie","Jerry","AAA Specialty Wholesale Inc","AAA","[email protected]","IDA","Yes",,,,0,9,9,,10, "AAP","Halberstam","Mendy","All About Promotions","AAP","[email protected]","IDA","Yes",,,,0,10,10,,12, Each of them are separate line.Now i want add another column in each like this "3P","Smith","Richard","3 Point Promotions","3P","[email protected]","IDA","Yes",,,,0,4,5,83.33,10,**96** "A1","Ernest","Amy","TAKE 1 Promotional Products","LCOOK","[email protected]","IDA","Yes",,,,0,6,7,,0,**97** "A2","Derek","Eaton","Advertising Edge Promotions","AE","[email protected]","IDA","Yes",,,,0,8,8,,10,**98** "AAA","Abercrombie","Jerry","AAA Specialty Wholesale Inc","AAA","[email protected]","IDA","Yes",,,,0,9,9,,10,**99** "AAP","Halberstam","Mendy","All About Promotions","AAP","[email protected]","IDA","Yes",,,,0,10,10,,12,**100** How i read content in line by line.And also how to write another value in same text file at each line.Please send solution for this problem.I am waiting for your reply.Thanks for reply. -Saravanan

  Read the article

• ifup eth0 failed in Ubuntu 11.10 and Ubuntu 10.04.3

  - by Ajay

  ifup eth0 failed to bring up eth0 First, I have set static ip using the below commands: Commands: ifdown eth0 ifconfig eth0 X.X.X.X netmask 255.255.252.0 up route add default gw X.X.X.X I was successful in setting up static ip X.X.X.X and I could see the same in the output of command "ifconfig". Now I am trying to revert network back to dhcp using the below commands: Commands: ifdown eth0 ifup eth0 Output : RTNETLINK answers: File exists ssh stop/waiting ssh start/running, process 1524 ifup eth0, failed to bring back dhcp. Contents of /etc/network/interfaces root@bdhcp396:~# cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp Is this a bug in Ubuntu 11.10/10.04.3? I see a similar bug raised - https://bugs.launchpad.net/ubuntu/+source/ifupdown/+bug/876829

  Read the article

• Al abrir archivo desde navegador se abre el directorio

  - by user67662

  al descargar un archivo a través de cualquier navegador (chrome, firefox, etc) e intentar abrirlo directamente, en vez de abrirse el archivo se abre el directorio en que se descargó. lo mismo me sucedió al intentar abrir un archivo desde el dash de gnome-shell. Esto sólo me sucede con los accesos directos a los archivos, cuando estoy dentro de nautilus se abre el archivo sin problemas. he intentado en distintos entornos de escritorio, el que uso más constantemente es Gnome-Shell, bajo Ubuntu 12.04 ¿cómo lo puedo solucionar? Gracias!

  Read the article

• What do the 4 keyboard input method systems in 10.04 mean?

  - by Android Eve

  I am trying to install another language support (in addition to the default US). Checking that language checkbox in "Install / Remove Languages..." wasn't too difficult. :) But now I want to add keyboard support, too, for that language. Again, I am prompted with a nice listbox with the following 4 options: none ibus lo-gtk th-gtk But I have no idea what these mean. I googled "ubuntu 10.04 keyboard input method system none ibus lo-gtk th-gtk" but all I could find was descriptions of problems, not an actual definition. Could you please point me to a webpage where I can learn about the meanings of these 4 different methods and +'s and -'s of each?

  Read the article

• Estudio de caso: CFO de At&T le apunta a la tecnología para transformar las Finanzas Globales

  - by RED League Heroes-Oracle

  AT&T es una de las pocas multinacionales modernas que han participado de todas las etapas anteriores de la innovación de las telecomunicaciones, de Alexander Graham Bell como inventor solitario, a Bell Labs, a los lanzamientos acelerados en las fundiciones de AT&T. La tecnología es el corazón de todo lo que AT&T hace, incluyendo sus inversiones en innovaciones tecnológicas para permitir que las finanzas de AT&T trabajen más estratégicamente con los negocios para asegurar que las inversiones en las iniciativas de crecimiento sean exitosas. Según John Stephens, Vicepresidente Ejecutivo y director financiero de AT&T, la empresa ha trazado un plan de inversión de tres años para mejorar y aumentar sus redes IP de banda ancha alámbricas e inalámbricas. El plan incluye la implementación del servicio 4G LTE para 300 millones de personas en los Estados Unidos, expansión de IP de banda ancha de alta velocidad a unos 57 millones de hogares de clientes y una expansión de la fibra a 1 millón de clientes corporativos adicionales en su área de servicio de telefonía fija. "La necesidad de velocidad es mayor que nunca, y este proyecto es nuestro paso hacia la innovación para ofrecer tal velocidad," dice Stephens. Como AT&T moderniza su infraestructura global, sus procesos operacionales se hacen tan poderosos como su red. Ha sido una tarea grande y compleja, pero Stephens se complace al decir que el departamento de finanzas de AT&T ha adoptado su papel de catalizador corporativo. Empezó con un concepto simple: "Vamos a hacer que todos hablen en el mismo idioma". Esto llevó a la consolidación de sistemas financieros heredados de las empresas adquiridas. No fue una tarea sencilla, dado que la empresa pasó por más de cinco adquisiciones importantes y un sinfín de otras transacciones. En 2007, AT&T tenía 17 aplicaciones apenas en la función de cuentas por pagar. Hoy, el número se ha reducido a dos. Asimismo, hubo 50 sistemas de reportes gerenciales oficiales y ahora hay tres, con planes de excluir uno de ellos. Al tener un único lenguaje volcado a las Finanzas en toda la empresa, el equipo de finanzas de AT&T ha eliminado las varias versiones de los mismos datos, reduciendo la posible confusión en las discusiones y en las decisiones de estrategia de negocios. Estos pasos también han reducido los costos y aceleraron la toma de decisiones. "Lo lindo de los sistemas es que permiten que la gente talentosa con habilidades analíticas usen su tiempo en esa zona, en vez de gastar tiempo en recolección, agregación y organización de los datos," señala Stephens. "Tenemos un proceso eficiente y eficaz que hace que nosotros, dejemos a la gente libre para dedicarse a aquello en que son realmente buenos. Y tenemos un equipo de alta calidad y ellos están en su mejor punto cuando son capaces de hacer su función para apoyar a la unidad de negocio”AT&T es una de las pocas multinacionales modernas que han participado de todas las etapas anteriores de la innovación de las telecomunicaciones, de Alexander Graham Bell como inventor solitario, a Bell Labs, a los lanzamientos acelerados en las fundiciones de AT&T. La tecnología es el corazón de todo lo que AT&T hace, incluyendo sus inversiones en innovaciones tecnológicas para permitir que las finanzas de AT&T trabajen más estratégicamente con los negocios para asegurar que las inversiones en las iniciativas de crecimiento sean exitosas.  Según John Stephens, Vicepresidente Ejecutivo y director financiero de AT&T, la empresa ha trazado un plan de inversión de tres años para mejorar y aumentar sus redes IP de banda ancha alámbricas e inalámbricas. El plan incluye la implementación del servicio 4G LTE para 300 millones de personas en los Estados Unidos, expansión de IP de banda ancha de alta velocidad a unos 57 millones de hogares de clientes y una expansión de la fibra a 1 millón de clientes corporativos adicionales en su área de servicio de telefonía fija. "La necesidad de velocidad es mayor que nunca, y este proyecto es nuestro paso hacia la innovación para ofrecer tal velocidad," dice Stephens. Como AT&T moderniza su infraestructura global, sus procesos operacionales se hacen tan poderosos como su red. Ha sido una tarea grande y compleja, pero Stephens se complace al decir que el departamento de finanzas de AT&T ha adoptado su papel de catalizador corporativo. Empezó con un concepto simple: "Vamos a hacer que todos hablen en el mismo idioma". Esto llevó a la consolidación de sistemas financieros heredados de las empresas adquiridas. No fue una tarea sencilla, dado que la empresa pasó por más de cinco adquisiciones importantes y un sinfín de otras transacciones. En 2007, AT&T tenía 17 aplicaciones apenas en la función de cuentas por pagar. Hoy, el número se ha reducido a dos. Asimismo, hubo 50 sistemas de reportes gerenciales oficiales y ahora hay tres, con planes de excluir uno de ellos. Al tener un único lenguaje volcado a las Finanzas en toda la empresa, el equipo de finanzas de AT&T ha eliminado las varias versiones de los mismos datos, reduciendo la posible confusión en las discusiones y en las decisiones de estrategia de negocios. Estos pasos también han reducido los costos y aceleraron la toma de decisiones. "Lo lindo de los sistemas es que permiten que la gente talentosa con habilidades analíticas usen su tiempo en esa zona, en vez de gastar tiempo en recolección, agregación y organización de los datos," señala Stephens. "Tenemos un proceso eficiente y eficaz que hace que nosotros, dejemos a la gente libre para dedicarse a aquello en que son realmente buenos. Y tenemos un equipo de alta calidad y ellos están en su mejor punto cuando son capaces de hacer su función para apoyar a la unidad de negocio”

  Read the article

• Why Wifi no longer works 12.04.1

  - by Roger

  starting this morning over wifi (Realtek RTL8188CE) on CLEVO W253HU. May be due to the update before yesterday, more pilot managed, but somehow it worked yesterday. If someone has an idea of the problem. Back command lines: cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 006: ID 192f:0416 Avago Technologies, Pte. Bus 002 Device 004: ID 5986:0315 Acer, Inc lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) lspci -nn | grep -i net 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) 03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05) lspci -k 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: i2c-i801 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device 9196 Kernel modules: rtl8192ce 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jme Kernel modules: jme 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: sdhci-pci 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jmb38x_ms Kernel modules: jmb38x_ms sudo lshw -C network *-network NON-RÉCLAMÉ description: Network controller produit: RTL8188CE 802.11b/g/n WiFi Adapter fabriquant: Realtek Semiconductor Co., Ltd. identifiant matériel: 0 information bus: pci@0000:02:00.0 version: 01 bits: 64 bits horloge: 33MHz fonctionnalités: pm msi pciexpress cap_list configuration: latency=0 ressources: portE/S:e000(taille=256) mémoire:f7d00000-f7d03fff *-network description: Ethernet interface produit: JMC250 PCI Express Gigabit Ethernet Controller fabriquant: JMicron Technology Corp. identifiant matériel: 0 information bus: pci@0000:03:00.0 nom logique: eth0 version: 05 numéro de série: 00:90:f5:c1:c6:45 taille: 100Mbit/s capacité: 1Gbit/s bits: 32 bits horloge: 33MHz fonctionnalités: pm pciexpress msix msi bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=jme driverversion=1.0.8 duplex=full ip=192.168.1.54 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s ressources: irq:44 mémoire:f7c20000-f7c23fff portE/S:d100(taille=128) portE/S:d000(taille=256) mémoire:f7c10000-f7c1ffff mémoire:f7c00000-f7c0ffff lsmod Module Size Used by btusb 18288 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 11 btusb,rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 binfmt_misc 17540 1 snd_hda_codec_realtek 224173 0 dm_crypt 23125 0 snd_hda_codec_hdmi 32474 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_hda_intel 33773 2 snd_hda_codec 127706 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi jmb38x_ms 17646 0 psmouse 87692 0 serio_raw 13211 0 memstick 16569 1 jmb38x_ms snd_seq_midi_event 14899 1 snd_seq_midi rtl8192ce 84826 0 rtl8192c_common 75767 1 rtl8192ce rtlwifi 111202 1 rtl8192ce snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq mac80211 506816 3 rtl8192ce,rtl8192c_common,rtlwifi mac_hid 13253 0 snd 78855 14 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 205544 2 rtlwifi,mac80211 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid i915 473035 3 drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper jme 41259 0 i2c_algo_bit 13423 1 i915 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci wmi 19256 0 video 19596 1 i915 iwconfig lo no wireless extensions. eth0 no wireless extensions. ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:c1:c6:45 inet adr:192.168.1.54 Bcast:192.168.1.255 Masque:255.255.255.0 adr inet6: fe80::290:f5ff:fec1:c645/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:4513 erreurs:0 :0 overruns:0 frame:0 TX packets:4359 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:3471675 (3.4 MB) Octets transmis:712722 (712.7 KB) Interruption:44 lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:686 erreurs:0 :0 overruns:0 frame:0 TX packets:686 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 Octets reçus:64556 (64.5 KB) Octets transmis:64556 (64.5 KB) sudo iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. uname -r -m 3.2.0-30-generic x86_64 cat /etc/network/interfaces auto lo iface lo inet loopback nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Connexion filaire 1] ------------------------------------------ Type: Wired Driver: jme State: connected Default: yes HW Address: 00:90:F5:C1:C6:45 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.54 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 sudo rfkill listrfkill list 1: hci0: Bluetooth Soft blocked: no Hard blocked: no The absence of line "Kernel driver in use:" the return of lspci-k made ??me think that it is not loaded yet but he seems to be. lsmod | grep rtl8192ce rtl8192ce 137478 0 rtlwifi 118749 1 rtl8192ce mac80211 506816 2 rtl8192ce,rtlwifi I found something disturbing in / var / log / syslog Sep 14 11:40:11 pcroger kernel: [ 64.048783] rtl8192ce-0:rtl92c_init_sw_vars():<0-0> Failed to request firmware! Sep 14 11:40:11 pcroger kernel: [ 64.048795] rtlwifi-0:rtl_pci_probe():<0-0> Can't init_sw_vars. Sep 14 11:40:11 pcroger kernel: [ 64.048835] rtl8192ce 0000:02:00.0: PCI INT A disabled Sep 14 11:40:11 pcroger kernel: [ 64.943345] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen Sep 14 11:40:11 pcroger kernel: [ 64.943358] ata1.00: failed command: READ FPDMA QUEUED Sep 14 11:40:11 pcroger kernel: [ 64.943371] ata1.00: cmd 60/00:00:00:68:6a/04:00:0b:00:00/40 tag 0 ncq 524288 in Sep 14 11:40:11 pcroger kernel: [ 64.943374] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Sep 14 11:40:11 pcroger kernel: [ 64.943381] ata1.00: status: { DRDY } Ubuntu and takes forever to start (2 min).

  Read the article

• Two Wifi Icons in Panel [Solved]

  - by Alex

  I have the exact problem in 13.10 as this user Two Wifi indicators in panel. Here are some screenshots: Here are some screenshots from another user: http://ubuntuforums.org/showthread.php?t=2183020&p=12825563 ifconfig and iwconfig outputs $ ifconfig lo Link encap:Local Loopback inet addr:XXXXXX Mask:XXXXXXX inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2243 errors:0 dropped:0 overruns:0 frame:0 TX packets:2243 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:209889 (209.8 KB) TX bytes:209889 (209.8 KB) wlan0 Link encap:Ethernet HWaddr XXXXXXXXX inet addr:XXXXXX Bcast:XXXXXXXX Mask:XXXXXXX inet6 addr: XXXXXXX Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5925 errors:0 dropped:0 overruns:0 frame:0 TX packets:3361 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2951818 (2.9 MB) TX bytes:630579 (630.5 KB) $ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"XXXXX" Mode:Managed Frequency:2.437 GHz Access Point: XXXXXXXX Bit Rate=72.2 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=49/70 Signal level=-61 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:153 Invalid misc:472 Missed beacon:0

  Read the article

• Oracle lanza una comunidad específica para hardware

  - by Eloy M. Rodríguez

  Para aquellos que aún no lo conozcan, quiero presentarles un grupo de interés creado por la compañía en Facebook con el nombre de Oracle Hardware Social Media Hub con el fin de ofrecer un lugar de reunión en la red en el que encontrar a miles de expertos, clientes, partners y reconocidos líderes de Oracle para debatir y descubrir lo último de Oracle. Allí encontrará una pionera aplicación de preguntas y respuestas denominada Pregunte al Experto de Oracle, en donde podrá formular preguntas, aportar comentarios e incluso ser premiado por sus aportaciones especializadas con el título de líderes reconocidos. En el Hardware Hub se podrá, entre otras cosas: Obtener contenidos exclusivos, solamente para los miembros Compartir sus conocimientos y experiencias con una comunidad global Comunicarse con expertos de Oracle en un entorno informal Descubrir métodos innovadores para optimizar el rendimiento de su hardware Acceder a contenidos en su idioma, incluyendo información de eventos, Webcasts, informes técnicos y mucho más.

  Read the article

• Install VLC 2.0.7 in CentOS 6.4?

  - by raaz

  I am keep failing in the installation process I have tried. I have started process as follows. yum install gcc dbus-glib-devel* lua-devel* libcddb wget http://download.videolan.org/pub/videolan/vlc/2.0.7/vlc-2.0.7.tar.xz tar -xf vlc-2.0.7.tar.xz && cd vlc-2.0.7 ./configure in the configure I am getting the error as follows configure: WARNING: No package 'libcddb' found: CDDB access disabled. checking for Linux DVB version 5... yes checking for DVBPSI... no checking gme/gme.h usability... no checking gme/gme.h presence... no checking for gme/gme.h... no checking for SID... no configure: WARNING: No package 'libsidplay2' found (required for sid). checking for OGG... no configure: WARNING: Library ogg >= 1.0 needed for ogg was not found checking for MUX_OGG... no configure: WARNING: Library ogg >= 1.0 needed for mux_ogg was not found checking for SHOUT... no configure: WARNING: Library shout >= 2.1 needed for shout was not found checking ebml/EbmlVersion.h usability... no checking ebml/EbmlVersion.h presence... no checking for ebml/EbmlVersion.h... no checking for LIBMODPLUG... no configure: WARNING: No package 'libmodplug' found No package 'libmodplug' found. checking mpc/mpcdec.h usability... no checking mpc/mpcdec.h presence... no checking for mpc/mpcdec.h... no checking mpcdec/mpcdec.h usability... no checking mpcdec/mpcdec.h presence... no checking for mpcdec/mpcdec.h... no checking for libcrystalhd/libcrystalhd_if.h... no checking mad.h usability... no checking mad.h presence... no checking for mad.h... no configure: error: Could not find libmad on your system: you may get it from http://www.underbit.com/products/mad/. Alternatively you can use --disable-mad to disable the mad plugin. [root@localhost vlc-2.0.7]# So I went to libmad http location and downloaded it and while doing make it gave me the errors.There are no errors at ./configure with libmad but make not going through. [root@localhost libmad-0.15.0b]# make (sed -e '1s|.*|/*|' -e '1b' -e '$s|.*| */|' -e '$b' \ -e 's/^.*/ *&/' ./COPYRIGHT; echo; \ echo "# ifdef __cplusplus"; \ echo 'extern "C" {'; \ echo "# endif"; echo; \ if [ ".-DFPM_INTEL" != "." ]; then \ echo ".-DFPM_INTEL" | sed -e 's|^\.-D|# define |'; echo; \ fi; \ sed -ne 's/^# *define *\(HAVE_.*_ASM\).*/# define \1/p' \ config.h; echo; \ sed -ne 's/^# *define *OPT_\(SPEED\|ACCURACY\).*/# define OPT_\1/p' \ config.h; echo; \ sed -ne 's/^# *define *\(SIZEOF_.*\)/# define \1/p' \ config.h; echo; \ for header in version.h fixed.h bit.h timer.h stream.h frame.h synth.h decoder.h; do \ echo; \ sed -n -f ./mad.h.sed ./$header; \ done; echo; \ echo "# ifdef __cplusplus"; \ echo '}'; \ echo "# endif") >mad.h make all-recursive make[1]: Entering directory `/home/raja/Downloads/libmad-0.15.0b' make[2]: Entering directory `/home/raja/Downloads/libmad-0.15.0b' if /bin/sh ./libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_INTEL -DASO_ZEROCHECK -Wall -march=i486 -g -O -fforce-mem -fforce-addr -fthread-jumps -fcse-follow-jumps -fcse-skip-blocks -fexpensive-optimizations -fregmove -fschedule-insns2 -fstrength-reduce -MT version.lo -MD -MP -MF ".deps/version.Tpo" \ -c -o version.lo `test -f 'version.c' || echo './'`version.c; \ then mv -f ".deps/version.Tpo" ".deps/version.Plo"; \ else rm -f ".deps/version.Tpo"; exit 1; \ fi mkdir .libs gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_INTEL -DASO_ZEROCHECK -Wall -march=i486 -g -O -fforce-mem -fforce-addr -fthread-jumps -fcse-follow-jumps -fcse-skip-blocks -fexpensive-optimizations -fregmove -fschedule-insns2 -fstrength-reduce -MT version.lo -MD -MP -MF .deps/version.Tpo -c version.c -fPIC -DPIC -o .libs/version.lo cc1: error: unrecognized command line option "-fforce-mem" make[2]: *** [version.lo] Error 1 make[2]: Leaving directory `/home/raja/Downloads/libmad-0.15.0b' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/raja/Downloads/libmad-0.15.0b' make: *** [all] Error 2 how can i resolve the issue and install VLC in my Centos ? I am using CentOS 6.4 . Thank you.

  Read the article

• Unable to set default gateway

  - by GrandMasterFlush

  I'm running Ubuntu server via Hyper-V and have successfully installed it but seem unable to ping the server or ping any other machines on the network from the server. After doing a bit of reading I've noticed that the default gateway isn't set but when I try and set it I keep getting error messages which I can't understand. From this article I've tried ip route add default via 10.0.10.200 Which reports: RTNETLINK answers: Operation not permitted If I try running it prefixed with sudo but it reports: `RNETLINK answers: No such process I've editted /etc/network/interfaces but when I start the machine and type netstat -nr there is nothing listed. Can anyone tell me where I'm going wrong please? EDIT : /etc/network/interfaces contains: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp

  Read the article

• How did Ubuntu know my WPA Key?

  - by nebukadnezzar

  I've recently moved my /home to another computer (keeping all configuration files), with a fresh installation of Ubuntu 10.10. After Installation I've installed wicd and ndiswrapper, to get my Internet Connection up and running. However, after changing /etc/network/interfaces from auto lo iface lo inet loopback To auto wlan0 iface wlan0 inet dhcp and running sudo /etc/init.d/networking restart to get wlan0 set up, wicd just suddenly connected... to my modem. Without supplying any information about the modem whatsoever. Of course wicd creates a local directory at ~/.wicd/, but that directory is empty, and the temporary global configuration at /var/lib/wicd/configurations/ didn't exist due to fresh installation of ubuntu. So what's the deal? Where did wicd get the ESSID and the WPA Key? There hasn't been any activity in this question, but it's still open (and even worth some rep)!

  Read the article

• Ubuntu Server Cannot Route to the Internet

  - by ejes

  I've been having this problem for weeks now, and I can't seem to figure out the problem. My server can route the local network and serves it well, however it cannot access the internet. It can't be the router because everything else on this lan can route through the router. I've even switched the ethernet port. Any help would be appreciated. I've tried all the usual places, anyway, here are the configs: root@uhs:~# uname -a Linux uhs 3.0.0-16-generic-pae #28-Ubuntu SMP Fri Jan 27 19:24:01 UTC 2012 i686 i686 i386 GNU/Linux root@uhs:~# cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface # auto eth1 # iface eth1 inet dhcp auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 root@uhs:~# ping -c 4 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.334 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.339 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.324 ms 64 bytes from 192.168.0.1: icmp_req=4 ttl=64 time=0.339 ms --- 192.168.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.324/0.334/0.339/0.006 ms root@uhs:~# ping -c 4 209.85.145.103 PING 209.85.145.103 (209.85.145.103) 56(84) bytes of data. --- 209.85.145.103 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms root@uhs:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:0c:6e:a0:92:6e inet addr:192.168.0.3 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::20c:6eff:fea0:926e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13131114 errors:0 dropped:0 overruns:0 frame:0 TX packets:10540297 errors:0 dropped:0 overruns:5 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3077922794 (3.0 GB) TX bytes:3827489734 (3.8 GB) Interrupt:10 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7721 errors:0 dropped:0 overruns:0 frame:0 TX packets:7721 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:551950 (551.9 KB) TX bytes:551950 (551.9 KB) root@uhs:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 root@uhs:~# # PRETEND Traceroute root@uhs:~# for i in {1..30}; do ping -t $i -c 1 209.85.145.103; done | grep "Time to live exceeded" root@uhs:~#

  Read the article

• setup dhcp server - "Job failed to start"

  - by jdicarreira

  I have an eth0 and eth1, eth0 has dynamic ip and on eth1 i setup static ip: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.10.0.1 netmask 255.0.0.0 gateway 10.10.0.1 ` and then i setup the "isc-dhcp-server" with the fowling command: INTERFACES="eth1" Finally... I went to this one "dhcpd.conf", with the fowling comand: default-lease-time 650; max-lease-time 79520; option subnet-mask 255.0.0.0; option broadcast-address 10.10.0.255; option routers 10.10.0.2; subnet 10.10.0.0 netmask 255.0.0.0 { range 10.10.0.10 10.10.0.250; } When I try to "sudo /etc/init.d/isc-dhcp-server start", I get "start: Job failed to start" Anyone knows whats wrong? :/

  Read the article

• Better Embedded 2012

  - by Valter Minute

  Il 24 e 25 Settembre 2012 a Firenze si svolgerà la conferenza “Better Embedded 2012”. Lo scopo della conferenza è quello di parlare di sistemi embedded a 360°, abbracciando sia lo sviluppo firmware, che i sistemi operativi e i toolkit dedicati alla realizzazione di sistemi dedicati. E’ un’ottima occasione per confrontarsi e, in soli due giorni, avere una panoramica ampia dall’hardware a Linux, da Android a Windows CE, dal .NET microframework a QT, senza troppi messaggi commerciali e con un’ottima apertura sia alle tecnologie commerciali che a quelle free e open source. Io parteciperò come speaker, parlando di Windows CE, ma anche come spettatore interessato a molte delle track di un programma che si va popolando e diventa mano a mano più interessante. Se volete cogliere l’occasione per visitare Firenze (che già sarebbe un motivo più che sufficiente!) e parlare di embedded, contattatemi perchè come speaker posso fornire un codice sconto che vi farà risparmiare un 20% sul prezzo della conferenza (che già è vantaggiosissimo, vista la quantità di contenuti dedicati all’embedded). Arrivederci a Firenze!

  Read the article

• /etc/network/interfaces doesn't always take affect

  - by user1221444

  For some reason my eth0 does not have internet on reboot sometimes. I am using a static ip. I can ping my gateway, but I am unable to ping dns servers, or anything out of my network. It seems that when my internet does work(Usually but just restarting enough times), my /etc/resolv.conf has a nameserver in it. It is empty when I have no internet access. I believe something is overwriting my interfaces settings sometimes on boot. Any help would be appreciated. I am running Ubuntu Server 12.04 64bit /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 173.213.192.234 netmask 255.255.255.248 network 173.213.192.232 broadcast 173.213.192.239 gateway 173.213.192.233 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 10.0.0.106 netmask 255.255.255.0 gateway 10.0.0.1

  Read the article

• Two Wifi Icons in Panel

  - by Alex

  I have the exact problem in 13.10 as this user Two Wifi indicators in panel. Here are some screenshots: Here are some screenshots from another user: http://ubuntuforums.org/showthread.php?t=2183020&p=12825563 ifconfig and iwconfig outputs $ ifconfig lo Link encap:Local Loopback inet addr:XXXXXX Mask:XXXXXXX inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2243 errors:0 dropped:0 overruns:0 frame:0 TX packets:2243 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:209889 (209.8 KB) TX bytes:209889 (209.8 KB) wlan0 Link encap:Ethernet HWaddr XXXXXXXXX inet addr:XXXXXX Bcast:XXXXXXXX Mask:XXXXXXX inet6 addr: XXXXXXX Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5925 errors:0 dropped:0 overruns:0 frame:0 TX packets:3361 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2951818 (2.9 MB) TX bytes:630579 (630.5 KB) $ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"XXXXX" Mode:Managed Frequency:2.437 GHz Access Point: XXXXXXXX Bit Rate=72.2 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=49/70 Signal level=-61 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:153 Invalid misc:472 Missed beacon:0

  Read the article

• dhcp configuration not working ubuntu 11.10

  - by Vivek Pradhan

  I am usually behind a proxy server in college so I connect to the ethernet or wifi using manual IPv4 addresses only inside college. I have been trying really hard to get the internet work at home, there is no proxy and I have set the network to use automatic dhcp. It seems like it is not able to connect to the port, It gets disconnected after some time automatically and then tries to reconnect. The same thing is happening with wifi networks also, after some time i see a pop up asking for authentication and ultimately its not able to connect. What might be the problem here. I looked up some similar questions and checked the /etc/network/interfaces file and looks like this: auto lo iface lo inet loopback I have no idea what those lines mean but there is no configuration for eth0 or wlan0. Any help is deeply appreciated. Ubuntu loses it charms due to these small glitches.

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >