Search Results

Search found 10603 results on 425 pages for 'device emulation'.

Page 9/425 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • Imon RM200 remote (device 15c2:ffdc) won't work on Ubuntu 12.04 or 11.10

    - by skerit
    The device is recognized just fine: Bus 001 Device 005: ID 15c2:ffdc SoundGraph Inc. iMON PAD Remote Controller Found /sys/class/rc/rc0/ (/dev/input/event6) with: Driver imon, table rc-imon-mce Supported protocols: RC-6 Enabled protocols: RC-6 Repeat delay = 500 ms, repeat period = 125 ms But any testing results in nothing. I point the remote, I press a few button and nothing happens. Not in irw, not in ir-keytable, nothing. It's driving me insane.

    Read the article

  • Wireless not working with a RaLink RT3090

    - by Promather
    I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with wireless LAN. It simply doesn't work! Could you please help me with this? Output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

    Read the article

  • Wireless Not Working on Ubuntu 10.10

    - by Promather
    I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with wireless LAN. It simply doesn't work! Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

    Read the article

  • Dell Inspiron 15R 5520 Wireless Device Not Detected

    - by ashish
    I bought a Dell Inspiron 5520 15R last week and I am a newbie in Ubuntu platform. I installed Windows 7 as well as Ubuntu 12.04 64-bit. But my wireless device is not detected in Ubuntu while it is working fine in Windows OS. My wireless device is Dell Wireless 1704 802.11B 2.4GHZ. Is this a compatibility problem with Ubuntu. What would be the solution? Do I need to install another version of Ubuntu?

    Read the article

  • Storage device manger regarding NTFS automount at boot time

    - by muneesh
    I am using storage device manager to auto-mount NTFS file system at boot time.But repeatedly, I am trying to uncheck the checkbox listed 'read only mode' in assistant option of storage device manager. I am not able to to auto-mount my NTFS partition in read/write mode. Please suggest a solution regarding this problem? Remember I am repeatedly trying to uncheck read only checkbox but not able to do that!

    Read the article

  • "selected bootable device failed" error dual boot ubuntu alongside windows8.1

    - by user286280
    i have hp laptop i had installed windows 8 which i upgraded to 8.1 i wanted to dual boot ubuntu 14.04 with windows 8.1 i diasbled secure boot and fast startup then used a liveusb to boot then an error msg pops up saying "the selected bootable device failed" my system boot order is : os boot manager usb hdd internal hdd so my question is that y this msg(selected boot device failed) is popping up and should i try to keep usb hdd on the top of my sysytem boot order in order to get it working??? pls reply soon

    Read the article

  • What is a Linux device name for RAID of sas drives?

    - by flashnik
    I have a RAID1 using Promise FastTrack TX2650 consisting of 2 SAS drives. What is a Linux device name for them? Like sda is for first sata drive. I have Windows server so I can't look it directly but need this information for smartctl usage. UPDATE. I found how to access RAID: smartctl -d scsi sdb (because I also have a SATA drive). But in this case I just get an information about just raid controller though I wantto get information about drives itself. Is it possible? Promises's control panel provides information only about their healthy status (boolean) and I want more. Mostly now I need information about temperature.

    Read the article

  • Applescript to connect to bluetooth device

    - by Mark117
    I'm trying to create an applescript to allow me to connect to a bluetooth device by it's Bluetooth ID. So far, i've managed to get an applescript to turn on bluetooth if it's off. Here's the code: # This is only necessary, if AppleScripts are not yet allowed to change checkboxes tell application "System Events" to set UI elements enabled to true # Now change the bluetooth status tell application "System Preferences" set current pane to pane id "com.apple.preferences.bluetooth" tell application "System Events" tell process "System Preferences" # Enabled is checkbox number 2 if value of checkbox 2 of window "Bluetooth" is 0 then click checkbox 2 of window "Bluetooth" end if end tell end tell quit end tell Would someone know if and how it's possible to set up a new bluetooth device and if it'd be posible to connect to a device based on it's device name/ it's device bluetooth ID? I've also tried to record the action in Automator but for the "set up new device" option, Automator just tells me: "click on "" button". Thanks

    Read the article

  • Question about Linux Device Drivers.

    - by smwikipedia
    I have just installed the Xubuntu. My box runs quite slower than before when installed with a Win7. I am wondering if I am missing some device drivers. I can use gnome-device-manager to list my devices. In the device list view, I saw several blue question mark on the left side of devices. Based on my windows experience, the question mark should indicate the device is not properly configured. Is it the same with gnome-device-manager? And most importantly, how could I know for sure whether or not the corresponding device drivers have been installed? Many thanks.

    Read the article

  • HTC Android device mounted as USB drive is read-only unless I'm root

    - by Ian Dickinson
    When I connect my HTC Incredible S to my Ubuntu 10.10 system as a USB drive, the device seems to mount OK, but is read-only unless I access it as root. For example, if I run nautilus, I can't drag and drop files to the SD-card in the phone, but if I run sudo nautilus I can. I have USB debug support set on the phone (Applications > Development > USB debugging) and I have added a rule for the device in /etc/udev/rules.d/51-android.rules on my Ubuntu system. Any suggestions as to how I can mount the drive so that I can copy content to the SD card without needing to sudo? Update Following advice from waltinator, I added the following line to my /etc/fstab: UUID=3537-3834 /media/usb1 vfat rw,user,noexec,nodev,nosuid,noauto However, the Android device is still being auto-mounted on /media/usb1 with uid and gid root. Update 2 syslog output: Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: mount -tvfat -osync,noexec,nodev,noatime,nodiratime /dev/sdd1 /media/usb1 Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: run-parts /etc/usbmount/mount.d

    Read the article

  • Draw depth works on WP7 emulator but not device

    - by Luke
    I am making a game on a WP7 device using C# and XNA. I have a system where I always want the object the user is touching to be brought to the top, so every time it is touched I add float.Epsilon to its draw depth (I have it set so that 0 is the back and 1 is the front). On the Emulator that all works fine, but when I run it on my device the draw depths seem to be completely random. I am hoping that anybody knows a way to fix this. I have tried doing a Clean & Rebuild and uninstalling from the device but that is no luck. My call to spritebatch.Begin is: spriteBatch.Begin(SpriteSortMode.FrontToBack, BlendState.AlphaBlend); and to draw I use spriteBatch.Draw(Texture, new Rectangle((int)X, (int)Y, (int)Width, (int)Height), null, Color.White, 0, Vector2.Zero, SpriteEffects.None, mDrawDepth); Where mDrawDepth is a float value of the draw depth (likely to be a very small number; a small multiple of float.Epsilon. Any help much appreciated, thanks!

    Read the article

  • mythbuntu 12 - lirc device doesn't appear to even exist

    - by FrustratedWithFormsDesigner
    I'm trying to get a new installation of Mythbuntu working. So far, everything is OK except the remote. The sensor for the remote is on my Hauppauge WinTV HVR 1250. First I tried to run irw to see what was being picked up by the sensor: $ irw connect: No such file or directory Then trying to run lircd gives: $ lircd start$ lircd start lircd: can't open or create /var/run/lirc/lircd.pid I look for any lirc devices and find there are none: $ ls /dev/li* ls: cannot access /dev/li*: No such file or directory Just to be sure, I check in /proc/bus/input/devices, which shows me two powerbuttons (not sure why), kbd and mouse dev, and the audio devs. Nothing for the IR receiver on the tuner card (which I thought was strange because shouldn't the tuner show up here?). $ cat /proc/bus/input/devices I: Bus=0019 Vendor=0000 Product=0001 Version=0000 N: Name="Power Button" P: Phys=PNP0C0C/button/input0 S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 U: Uniq= H: Handlers=kbd event0 B: PROP=0 B: EV=3 B: KEY=10000000000000 0 I: Bus=0019 Vendor=0000 Product=0001 Version=0000 N: Name="Power Button" P: Phys=LNXPWRBN/button/input0 S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 U: Uniq= H: Handlers=kbd event1 B: PROP=0 B: EV=3 B: KEY=10000000000000 0 I: Bus=0003 Vendor=099a Product=7202 Version=0111 N: Name="Wireless Keyboard/Mouse" P: Phys=usb-0000:00:10.1-2/input0 S: Sysfs=/devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.0/input/input2 U: Uniq= H: Handlers=sysrq kbd event2 B: PROP=0 B: EV=120013 B: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe B: MSC=10 B: LED=7 I: Bus=0003 Vendor=099a Product=7202 Version=0111 N: Name="Wireless Keyboard/Mouse" P: Phys=usb-0000:00:10.1-2/input1 S: Sysfs=/devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.1/input/input3 U: Uniq= H: Handlers=kbd mouse0 event3 B: PROP=0 B: EV=1f B: KEY=4837fff072ff32d bf54444600000000 70001 20c100b17c000 267bfad9415fed 9e168000004400 10000002 B: REL=143 B: ABS=100000000 B: MSC=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Line" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input4 U: Uniq= H: Handlers=event4 B: PROP=0 B: EV=21 B: SW=2000 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Front Mic" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input5 U: Uniq= H: Handlers=event5 B: PROP=0 B: EV=21 B: SW=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Rear Mic" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input6 U: Uniq= H: Handlers=event6 B: PROP=0 B: EV=21 B: SW=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Front Headphone" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input7 U: Uniq= H: Handlers=event7 B: PROP=0 B: EV=21 B: SW=4 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Line-Out" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input8 U: Uniq= H: Handlers=event8 B: PROP=0 B: EV=21 B: SW=40 According to dmesg, the driver was registered, but it doesn't look like any devices was associated with the driver: $ dmesg | grep irc [ 10.631162] lirc_dev: IR Remote Control driver registered, major 249 So far, I've seen a number of forum pages suggesting that I use some trick to create a link between /dev/lirc and some other device that is the REAL IR sensor, like /dev/event5, but those cases assume that the real device is shown from /proc/bus/input/devices, and I don't see any such device there. Any suggestions on how to fix or further diagnose this?

    Read the article

  • #iPad at One Week: A Great Device Made with a Heavy Hand

    - by andrewbrust
    I have now had my iPad for a little over a week. In that time, Apple introduced the world to its iPhone OS 4 (and the SDK agreement’s draconian new section 3.3.1), HP introduced is Slate, and Microsoft got ready to launch Visual Studio 2010 and .NET 4.0. And through it all I have used my iPad. I've used it for email, calendar, controlling my Sonos, and writing an essay. I've used it for getting on TripIt and Twitter, and surfing the Web. I've used it for online banking, and online ordering and delivery of food. And the verdict? Honestly? I think it's a great device and I thoroughly enjoy using it. The screen is bright and vibrant. I am surprisingly fast and accurate when I type on it. The touch screen's responsiveness is nearly flawless. The software, including a number of third party applications, include pleasing animations and use of color that make it fun to get work done. And speaking of work, the Exchange integration is, dare I say it, robust. Not as full-featured as on a PC or Windows Mobile device, but still offering core functionality and, so far at least, without bugs. The UI is intuitive, not just to me, but also to my 5 1/2 year old, and also to my nearly-3-year-old son. They picked it up and, with just just a few pointers from me, they almost immediately knew what to do, whether they were looking at photos (and swiping/flicking along as they did so), using a drawing program, playing a game, or watching YouTube videos. The younger of the two of them even tried to get up on a chair and grab the thing today. He dropped it, from about 4 feet off the ground. And it's still fine. (Meanwhile, I'll be keeping it on a higher shelf.) I cannot fully describe yet what makes this form factor and this product so appealing. Maybe it's that it's an always-on device. Maybe it's just being able to hold such a nice, relatively large display so close. Maybe it's the design sensibility, that seems to pervade throughout the app ecosystem. Or maybe it's that one's fingers, and not pens or mice, are the software's preferred input device. Whatever the attraction, it's strong. And no matter how much I tend to root for Microsoft and against Apple, Cupertino has, in my mind, scored big, Can Microsoft compete? Yes, but not with the Windows 7 standard UI (nor with individual OEMs’ own UIs on top). I hope Microsoft builds a variant of the Windows Phone 7 specifically for tablet devices. And I hope they make it clear that all developers, and programming languages, are welcome to the platform. Once that’s established, the OEMs have to build great hardware with fast, responsive touch screens, under Microsoft's watchful eye. That may be the hardest part of getting this right. No matter what, Microsoft's got a fight on its hands. I don't know if it can count on winning that fight, either. But Silverlight and Live Tiles could certainly help. And so can treating developers like adults.  Apple seems intent on treating their devs like kids, and then giving the kids a curfew.  For that, dev-friendly Microsoft may one day give thanks.

    Read the article

  • Yet again: "This device can perform faster" (Samsung Galaxy Tab 2)

    - by Mike C
    I've been doing a lot of research with no reasonable solution. Please excuse the length of my post. When I plug my Galaxy Tab 2 (7" / Wi-Fi only / Android ICS) into my Windows 7 64-bit machine, I (almost always) get this warning popup that "This device can perform faster." And in fact, transfers onto the Tab in this mode are slow. The two times I've been able to get a high-speed connection, the transfer has occurred at the expected speed. I just don't know what to do to get that high-speed transfer. (The first time I did, it was the first time I connected the Tab; the second time I did, I was fiddling around and unplugging/plugging in again.) That popup is telling me that the device is USB2, but that it thinks I've connected to a USB1 port. In fact, every USB port (there are ten) on this system is USB2. It's an ASUS M3A78-EMH mobo from late 2008. I'm not sure what the chipset is; the CPU is an AMD Athlon 4850e, but I've seen this message reported for non-AMD systems. (Every mobo reference I've seen in reports on this has been for Asus, but of course most reporters aren't reporting that info at all.) The Windows 7 installation is just a couple weeks old (I had a disk crash) but I saw the same warning on the WinXP/64 that was installed previously. In Device Manager, there are two "Standard Enhanced PCI to USB Host Controller" nodes which are the actual high-speed controllers. There are also five "Standard OpenHCD USB Host Controller" nodes, which I have determined are virtual USB1 controllers embedded in the "Enhanced" controllers. (In Device Manager, I'm using View|Devices by Connection.) My high-speed thumb drives, external disks, and iPod all show up as subnodes of the "Enhanced" controllers; the keyboard, mouse, and USB speakers under the "OpenHCD" ones -- and this is true no matter which ports these devices are plugged into. The Tab shows up under an OpenHCD node, unsurprisingly. It appears as a threesome: a top-level "Mobile USB Composite device" with two subs: "Galaxy Tab 2" and "Mobile USB Modem." (I have no idea what the modem device implies or how I might use it, but I don't care about it either: I just want the Tab to reliably connect at high speed.) On the Tab, the USB support has a switch between PTP and MTP, the latter being the default, and the preferred mode for me (as I'm usually hooking it up for music synch). I have tried, however, connecting it as PTP, and it still connects as USB 1. (As PTP, only the "Galaxy Tab 2" device appears -- no Composite, no Modem.) If it's plugged in as MTP and I change the setting to PTP, Windows unloads and reloads the device, and voila: The Tab appears under an "Enhanced" node, but eventually re-loads again to show a exclamation icon on the device; Properties then shows "This device cannot start." Same response if I plug it in as PTP and then change to MTP; in this case, only the Tab itself shows the exclamation, not the other two devices. One thing I have not tried, and really would prefer to avoid, is installing the "beta" chipset driver available on the Asus website, which is dated 2009. Windows tells me it has the most up-to-date drivers for the Tab, and for the chipset, and I'm inclined to believe that. I suspect the problem is with the Samsung drivers, or possibly the hardware. One suggestion I saw elsewhere which might, possibly, pertain is to ensure the USB cable is properly shielded; however, the Tab has one of those misbegotten 30-pin, not-quite-an-iPod connectors; I don't know if I could find a 3rd party one. It seems unlikely that this cable is improperly shielded, tho. (Is there a way to test that?) So, my question is: does anyone know how to get this working as one might reasonably expect it to?

    Read the article

  • Card emulation via software NFC

    - by user85030
    After reading a lot of questions, i decided to post this one. I read that stock version of android does not support API's for card emulation. Also, we cannot write custom applications to secure element embedded in nfc controllers due to keys managed by google/samsung. I need to emulate a card (mifare or desfire etc). The option i can see is doing it via software. I have a ACR122U reader and i've tested that NFC P2P mode works fine with the Nexus-S that i have. 1) I came across a site that said that nexus s's NFC controller (pn532) can emulate a mifare 4k card. If this is true, can i write/read apdu commands to this emulated card? (Probably if i use a modded rom like cyanogenmod) 2) Can i write a android application that reads apdu commands sent from the reader and generate appropriate responses (if not fully, then upto some extent only). To do so, i searched that we need to patch nexus s with cynagenmod. Has someone tried emulating card via this method? I see that this is possible since we have products from access control companies offering mobile applications via which one can open doors e.g. http://www.assaabloy.com/en/com/Products/seos-mobile-access/

    Read the article

  • Are HDMI to VGA Adapters Really Device-Specific?

    - by allquixotic
    There are a lot of devices on the market right now (especially mobile devices) with a Micro-HDMI or Mini-HDMI port and no VGA or D-Sub output. Most manufacturers of said devices sell a cable that looks something like this: I have yet to find a cable like this that claims to work on a wide array of devices. In general, these cables claim to work with one specific device only. The way these cables work, I think, is that analog VGA signals are sent from the HDMI port on the device. This should work for devices that have special hardware on the motherboard/GPU capable of driving this. Is it the case that these cables have to be custom designed for each device? Or, is it rather that any device which possesses this special "signaling of analog VGA over the HDMI port" can be made to work with a cable that is physically compatible (i.e. the HDMI end plugs into the device and the VGA end accepts a VGA monitor cable)? Note that I am not looking for a product recommendation, just a conceptual clarification on what exactly these devices are doing. Also, a few remarks: The cables like the one depicted here are not digital to analog converters. I know about these: they are expensive, and they are the ONLY solution if your device only outputs a digital signal and is incapable of driving analog VGA over the HDMI port. The cables like the one depicted here are not straight crossover cables from VGA to HDMI, either. The crossover cables are designed to send a digital HDMI signal over the VGA port's wires; that is, the wire protocol is HDMI (digital) but the physical pinout is the same as VGA, even though nothing analog is happening. Once again, this is not the behavior that, I believe, the devices which I'm talking about in this question are doing. The cabling and devices that this question is about transmit the analog VGA data over the HDMI port (the HDMI port is in the device outputting the data, and the VGA side is the monitor/projector).

    Read the article

  • AddThis - contains too many device filters error

    - by Yousef_Jadallah
    When using AddThis service with asp.net, some exceptions will throw like these: The string 'fb:like:layout' contains too many device filters. There can be only one. The string 'g:plusone:size' contains too many device filters. There can be only one. You can solve this by using "In line server code".   Step 1: Implement the following code in your code file:   Protected Function GetFacebookAttribute() As String Return String .Format( "{0}=" "{1}" ""...(read more)

    Read the article

  • Multi-Device Development in Visual Studio

    - by Daniel Moth
    You've read on Soma's blog post that Microsoft is broadening Visual Studio's reach to other platforms (including for example Android)…  specifically this is what Soma wrote: "With bring-your-own-device trends in the enterprise, and heterogeneity in the consumer mobile device market, developers are increasingly focused on building apps that can target a variety of devices. We are committed to enabling developers to build apps for this heterogeneous, mobile-first world with Visual Studio for the technology of your choice - whether .NET, C++ or JavaScript." If you live in Washington state in the USA (or are willing to relocate here) I am looking for a Program Manager to help with this effort – read the rest of the job description here which is also where you can apply for the position (or email me). Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Testing on Device Other Than the Known Brand Question (Local and Imported Phone Question)

    - by David Dimalanta
    I have a question. When testing a device by using Eclipse, it's easy to install and add device software with these specific brands commonly used in game testing like Samsung, Google, T-Mobile, and HTC; according to the Android Developers website. What if I'm using other brands that runs on Android to test the program via Eclipse (i.e. MyPhone, Starmobile), what should I look for to download in order to enable testing phones that those brands are using other than the brands that are known and commonly used: model number or simply brand? Here's some examples of these brands other than the brands we've known that runs on Android: Starmobile Engage 7 (http://www.lazada.com.ph/Starmobile-Engage-7-Android-40-4GB-with-Wi-Fi-Black-Starmobile-Mercury-B201-COMBO-39833.html/) My|Phone A898 Duo (http://www.myphone.com.ph/#!a898-duo/c1yt) Also, take note that I'm a Filipino programmer working at the Philippines to test our local smartphones for the created Android game or app. Hope you can understand me for my help.

    Read the article

  • Diabetic trying to use Ubuntu with Medtronic Carelink insulin pump support USB device

    - by Gary C.
    I am taking a wild shot here: I am a type 1 diabetic who is going on the Insulin pump. Unfortunately, the Medtronic Carelink USB device that uploads data from the pump online only has windows drivers. Has anybody managed to get this working under Ubuntu using Wine or by any other method: lsusb yields: Bus 001 Device 014: ID 0a21:8001 Medtronic Physio Control Corp. MMT-7305WW [Medtronic Minimed CareLink] I really don't want to buy a windows machine just for this, but it's probably one in a million that somebody else has managed to make this work under Linux.

    Read the article

  • USB3 boot device disappears post-grub

    - by JoBu1324
    I have an installation of Ubuntu 12.10 on a USB3 device, and it occasionally disappears during boot, dropping me into busybox. This is what I've been able to figure out so far: During a single boot, the following happened: At the grub2 menu, I typed c and dropped to the grub> prompt I typed ls -l and got a list of all the devices, including partitions and UUIDs - the USB3 partitions were available I escaped back to the boot select menu, selected the default item (ubuntu) and hit enter The screen went black for a second before turning into the purple Ubuntu boot screen with the dots (which usually indicates that the boot will fail. When all is well I don't get the black screen) The boot dropped into BusyBox v1.19.3 with the message `ALERT! /dev/disk/by-uuid/[uuid] does not exist blkid displays all of the partitions except those of the USB3 device, as does ls /dev/disk/by-uuid or any of the alternatives.

    Read the article

  • Help identifying device and driver for 0bda:1724

    - by user104547
    I've got a new Lenovo Ideapad Yoga 13. The onboard lan/bluetooth device is identified in Linux as 0bda:1724 (via lsusb). No network peripherals are reported from lspci. From the interwebs, the vendor:product above looks to be RT2573, however, in Windows, the device is identified as RTL8723A. Unfortunately, I have followed both roads, trying rt2500usb, rt2x00usb, and rtl8723e. I have emailed Realtek asking them for help but so far my email has fallen on deaf ears. I've posted the output of lspci -nn -v and lsusb -v to: http://pastebin.com/dqvTSVjF Any help at all would be appreciated. Thank you, Ryan

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >