Search Results

Search found 3676 results on 148 pages for 'dual band'.

Page 9/148 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• Dual Monitor Setup with Ati Radeon Hd 5700 results in unusabledesktop win7

  - by NorthPole

  I have an ATI Radeon HD 5700 card which i've been using under fully updated windows 7 with its latest drivers. My monitor is a 2004 NEC LCD1703M which despite being pretty old runs fine. A friend gave me an IIYAMA ProLite E1900WS monitor (2009 or 20010 ). Both monitors are vga only. I've been using a DLDVI to VGA adapter to connect my old monitor and tested the same adapter to the new monitor and it worked fine. So I bought an HDMI to vga adapter with the purpose of having a dual monitor setup. But when both screens are connected to the card the following problem occurs: The monitor connected to the hdmi port cycles between sleep and a black screen while the other shows the operating system for about two seconds before getting black for another two seconds. I can "use" the computer (move the mouse,click,type e.t.c.) while this happens but its not something pleasant. I tried reinstalling the driver, booting with both screens connected (in which case the powerup messages and the bios are mirrored in both screens until I get to the login screen where everything falls apart) Funny thing is, everything works if I disconnect the ATI graphics card and use the onboard intel one. So, any suggestions as to what might be the problem and how I can fix it?

  Read the article

• Windows 7 - How to access my documents from Windows 8 (dual boot)

  - by msbg

  I am dual booting Windows 7 and Windows 8 on two different partitions of the same drive: Win7: (C:) Win8: (D:) I am trying to get access to my Win7 user folder (C:\Users\Mason) in order to access my Win7 documents folder (C:\Users\Mason\Documents) from Windows 8. When I try to on Windows 8, I get an error message saying "You don't have permission to access this folder. Click here to permanently get access to this folder". When I click, the progress bar in Windows Explorer slowly moves to the maximum and disappears. When I try opening the folder, I get the same error message. When editing security permissions for the folder in Windows 8, Explorer freezes. I do not know how to remove the restrictions from Windows 7. I checked the Windows 8 user folder (D:\Users\Mason) and it had the group or user name: "S-1-5-21-936898901-3363470404-1273668825-1001". I tried copying and pasting it into the Win7 User Folder Permissions, but got the error "An object with the following name cannot be found". How would I access my folders?

  Read the article

• Safely removing my linux dual boot

  - by de1337ed

  Currently, I dual boot with win7 and opensuse 12.1. Is it okay if I first restore the MBR for win7, and then format the linux drives? Or would it be better for me to first format the linux drives, and then restore the MBR? The reason I ask this is sometimes I get nasty errors when I try and boot into my win7 cd in the latter method. Is it possible to restore the MBR without having to boot into the win7 cd? Like, can I remove linux using the disk management utility in win7, and then fix the mbr while I'm still in win7, or do I have to boot into the win7 cd? If I can do this, how do I go about doing so? Thank you. EDIT::::: The spamming of f8 didn't work, it just made loud beeping noises, so I decided to simply boot into my windows disk and use the bootsect /nt60 SYS /mbr command. Note: I haven't formatted my linux partition yet. After I did that, I restarted my computer, and nothing happened. Basically, GRUB is still the MBR and I'm still able to access openSUSE. I think the reason why this is happening is because I think my GRUB is on a separate partion than the linux OS. Here is a picture of my diskmgmt in win7: . openSUSE did all the partioning stuff for me. All I know is that the 40gb that is there is where openSUSE is installed, but I have no clue what's on the 6.05gb and the 14.75gb partitions. Can anyone help me find which partition GRUB is on, and then remove it so I can restore the windows MBR? Thank you.

  Read the article

• Dual-monitor Windows XP, monitors are "identified wrong"

  - by Susan

  Trying to use a dual-monitor desktop system with Windows XP.... 1 graphics card... with digital/analog outputs. Picking: Desktop - Properties - Settings - Identify It shows "2" as my left monitor... and "1" as my right. How do I switch them around? Here's what I've tried so far: Switch the cables (I can't. I need the digital cable on the better monitor.) Switch the monitors (I can't. One has a few dead pixels.) Drag the 1+2 graphics around (That doesn't change the IDENTIFY numbers.) Pick "use as primary" or "extend" (That doesn't change the IDENTIFY numbers.) Anything else I can try? What exactly controls/switches the "IDENTIFY numbers" around? I know it can be done. For weeks I ran this exact set-up... with the CORRECT numbers appearing on the monitors.... then just recently... after a few reboots... they now appear "switched around".

  Read the article

• Install Debian stable linux ISO from USB to dual boot Windows

  - by tgkprog

  I want debian as dual boot with my windows vista, Free'd up 50GB in my d drive. Plan to use 40 for debian install, 6GB for swap space Have a 16GB USB drive Downloaded http://unetbootin.sourceforge.net/ Downloaded DVD files of stable debian-7.0.0-amd64-DVD-1.iso ( debian-7.0.0-amd64-DVD-2.iso and 3) After I choose HD install, unetbootin says place the ISO in the same place. but I have 3. do i need to merge them? if so any freeware to do that? can i do it with 7zip? when I extract with 7 zip there are classes between the 3 ISO files. Just over write? Options to merge (format etc for 7zip) ? Or I must use I tried to keep the 3 files with the other unetbootin files but get an error msg Files I have on my USB 06/30/2013 11:44 PM 2,835,648 ubnkern 06/05/2013 12:14 AM 3,998,007,296 debian-7.0.0-amd64-DVD-1.iso 06/04/2013 03:30 PM 4,696,872,960 debian-7.0.0-amd64-DVD-2.iso 06/05/2013 01:25 AM 4,698,955,776 debian-7.0.0-amd64-DVD-3.iso 06/30/2013 11:45 PM 6,530,278 ubninit 06/30/2013 11:46 PM 155 syslinux.cfg 06/30/2013 11:46 PM 60,928 menu.c32 also i can only copy above files if i format my USB as NTFS On FAT32 says too large to copy .iso How do I get around that? My internet needs a login so cannot do net install

  Read the article

• OSU Marching Band Delivers Impressive Half-Time Tribute to Video Games

  - by Jason Fitzpatrick

  This Saturday, during the Ohio State-Nebraska game halftime, the Ohio State University marching band paid tribute to decades of popular video games in an impressively choreographed 10 minute show. The video starts off a little shaky, but once the crowd settles down to watch the show things get significantly smoother. How many of the games do you recognize? [via Reddit] 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

  Read the article

• Microsoft Issues Out-of-Band Internet Explorer Security Patch

  Microsoft fixes a gaping security hole in Internet Explorer 6 and 7, plus tosses in fixes for nine other critical security flaws in the same out-of-band patch.

  Read the article

• How to uninstall Ubuntu 12.04 LTS dual booting with Windows 7?

  - by user103799

  I need to uninstall Ubuntu 12.04 LTS from my laptop. It's currently dual booting with windows 7. I've searched and found some ways to do this, but all use some kind of a CD to complete the deletion. I have neither the Ubuntu Live CD nor Windows Install CD/Recovery CD. This laptop did not come with one, and I unfortunately have no available storage device to make a recovery CD. Is there a way to completely uninstall Ubuntu 12.04 LTS dual booting without using any hardware? If there's no way, then how to uninstall using the least hardware possible? Or easy to find hardware? I've nothing against Ubuntu. I installed this as a backup/alternative to error-prone Windows 7. However, after a hardware upgrade, including extra RAMs and a new, better CPU, Windows 7 runs smoothly again. Now I'm running low on hard drive space and need the 40 gig or so of space I partitioned for Ubuntu back. Any help is appreciated, and thanks in advance!

  Read the article

• Help! Problem dual boot ubuntu windows8 (can't start ubuntu) [duplicate]

  - by a35

  This question already has an answer here: Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported) 5 answers EDIT: I know that there are many topics about dual boot ubuntu windows8, i have read them, my problem is that i cant boot ubuntu neither from HDD nor from live USB. I know about boot repairing, but how can I use it, If i cant boot ubuntu?? I heard about terrible problems with windows 8-linux dual boot, but I really need ubuntu because of school. I read many tutorials how to install ubuntu next to windows8, but despite that a problem accured. Here is what I have done. I have MSI GE60, windows(64bit) is running on mSATA SSD C drive. HDD is divided to two partitions for windows and I left there 50GB for ubuntu. I downloaded ubuntu 12.04.3desktop-amd64(64bit), created bootable USB using Universal USB Installer (recommended on Ubuntu site). I disabled USB legacy support (that Ubuntu could be installed in EFI mode- I was following instructions on Ubuntu site), and also Secure Boot (windows is now angry with me because I turned it off- when I start windows it informs me I should enable that). I inserted USB rebooted computer and chose install ubuntu, divided free 50GB space to swap(2000MB) and rest as ext4 main storage space for ubuntu. Installation passed normally, Ubuntu then asked me to reboot computer. After reboot windows 8 started. Now I can't start ubuntu. When I restart win8 to uefi there is possibility to boot ubuntu, but when I choose it, it crashes. When I choose try ubunfu from connected USB, nothing happend, still dark screed. What is wrong? Can you help me? I am in hurry to do it because of school. Thanks.

  Read the article

• Intel Dual Band Wireless-AC 7260 keeps dropping wifi

  - by Rick T

  My wifi Intel Dual Band Wireless-AC 7260 keeps dropping wificonnection drops and the network to which I was connected disappears from the list of available networks in network manager. The only way to fix it is to disable wifi and re-enable it How can I fix this. I'm using ubuntu 14.04 64bit. It mostly drops connections on the 5ghz network. My other devices don't drop connections over wifi. see logs and versions rt@simon:~$ uname -a Linux simon 3.13.0-34-generic #60-Ubuntu SMP Wed Aug 13 15:45:27 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux rt@simon:~$ rt@simon:~$ dmesg | grep iwl [ 3.370777] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X [ 3.381089] iwlwifi 0000:03:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm [ 3.414637] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 3.414695] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 3.414913] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 3.630208] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 9.304838] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 9.305068] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 605.483174] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 605.483396] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S rt@simon:~$ cat /var/log/syslog | grep -e iwl -e 80211 | tail -n25 Aug 14 08:13:02 simon kernel: [ 3.452780] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:13:02 simon kernel: [ 3.630208] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Aug 14 08:13:06 simon NetworkManager[1125]: <info> rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/ieee80211/phy0/rfkill1) (driver iwlwifi) Aug 14 08:13:06 simon NetworkManager[1125]: <info> (wlan0): using nl80211 for WiFi device control Aug 14 08:13:06 simon NetworkManager[1125]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 3) Aug 14 08:13:06 simon kernel: [ 9.304838] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:13:06 simon kernel: [ 9.305068] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:14:18 simon kernel: [ 81.230162] cfg80211: Calling CRDA to update world regulatory domain Aug 14 08:14:18 simon kernel: [ 81.232330] cfg80211: World regulatory domain updated: Aug 14 08:14:18 simon kernel: [ 81.232332] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 08:14:18 simon kernel: [ 81.232333] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232334] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232335] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232336] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232337] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:02 simon kernel: [ 605.483174] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:23:02 simon kernel: [ 605.483396] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:23:18 simon kernel: [ 621.223905] cfg80211: Calling CRDA to update world regulatory domain Aug 14 08:23:18 simon kernel: [ 621.228945] cfg80211: World regulatory domain updated: Aug 14 08:23:18 simon kernel: [ 621.228950] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 08:23:18 simon kernel: [ 621.228954] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228956] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228959] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228961] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228963] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

  Read the article

• No more internet connection after update in 14.04 with Intel Dual Band Wireless AC 7260

  - by luis

  My Dell XPS 15 (haswell) was working fine until I stupidly accepted recently to apply Ubuntu updates. Since then, my wifi does not work (it shows "device not managed" when clicking wifi icon in toolbar). Even USB to Ethernet adapter does not seem to work. Bluetooth at least "sees" other bluetooth devices around... See below output from dmesg (dmesg |grep iwl) : [ 886.462459] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 886.462561] iwlwifi 0000:06:00.0: Direct firmware load failed with error -2 [ 886.462562] iwlwifi 0000:06:00.0: Falling back to user helper [ 886.463284] iwlwifi 0000:06:00.0: loaded firmware version 22.1.7.0 op_mode iwlmvm [ 886.475345] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 886.475433] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.475684] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.689214] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Below the output from modinfo iwlwifi: filename: /lib/modules/3.13.0-29- generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko license: GPL author: Copyright(c) 2003-2013 Intel Corporation <[email protected]> version: in-tree: description: Intel(R) Wireless WiFi driver for Linux firmware: iwlwifi-100-5.ucode firmware: iwlwifi-1000-5.ucode firmware: iwlwifi-135-6.ucode firmware: iwlwifi-105-6.ucode firmware: iwlwifi-2030-6.ucode firmware: iwlwifi-2000-6.ucode firmware: iwlwifi-5150-2.ucode firmware: iwlwifi-5000-5.ucode firmware: iwlwifi-6000g2b-6.ucode firmware: iwlwifi-6000g2a-5.ucode firmware: iwlwifi-6050-5.ucode firmware: iwlwifi-6000-4.ucode firmware: iwlwifi-3160-7.ucode firmware: iwlwifi-7260-7.ucode srcversion: 1E6912E109D5A43B310FB34 alias: pci:v00008086d0000095Asv*sd00005490bc*sc*i* (a pack of lines of kind "alias: pci:xxxxx...." that I guess are not helpful) alias: pci:v00008086d0000095Bsv*sd00005290bc*sc*i* depends: cfg80211 intree: Y vermagic: 3.13.0-29-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: 66:02:CB:36:F1:31:3B:EA:01:C4:BD:A9:65:67:CF:A7:23:C9:70:D8 sig_hashalgo: sha512 parm: swcrypto:using crypto in software (default 0 [hardware]) (int) parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint) parm: amsdu_size_8K:enable 8K amsdu size (default 0) (int) parm: fw_restart:restart firmware in case of error (default true) (bool) parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int) parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable, 2=enable (default: 0) (int) parm: nvm_file:NVM file name (charp) parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) parm: power_save:enable WiFi power management (default: disable) (bool) parm: power_level:default power save level (range from 1 - 5, default: 1) (int) I downloaded the latest versions of iwlwifi firmware from git (git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git; copy iwlwifi-3160-9.ucode iwlwifi-7260-9.ucode iwlwifi-7265-9.ucode to /lib/firmware and reboot) but as you can imagine it did not help. Update #1: Downloaded from http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=get&target=iwlwifi-7260-ucode-22.15.8.0.tgz and copied the file into /lib/firmware. After reloading it with modprobe, it seems to be OK: [ 14.761283] iwlwifi 0000:06:00.0: enabling device (0000 -> 0002) [ 14.761472] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 14.772478] iwlwifi 0000:06:00.0: loaded firmware version 22.15.8.0 op_mode iwlmvm [ 14.800274] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 14.800349] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 14.800657] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 15.007048] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' However, clicking in wifi in the toolbar still shows "device not managed". Any clues? Many thanks! Luis

  Read the article

• Internet Explorer Cumulative Update Releasing Out-of-Band

  This is an advance notification of an out-of-band security bulletin that Microsoft is intending to release on March 30, 2010. The bulletin is being released to address attacks against customers of Internet Explorer 6 and Internet Explorer 7. Users of Internet Explorer 8 and Windows 7 are not vulnerable to these attacks. The vulnerability used in these attacks, along with workarounds, is described in Microsoft Security Advisory 981374....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• How to prevent GRUB from appearing after selecting Ubuntu from Windows' Dual Boot menu?

  - by Jesse Ramos

  I have Windows 7 and Ubuntu 13.10 dual-boot. I have been trying to figure out a way to make Windows boot menu the only boot menu that comes up. I used EasyBCD to add an option to boot into Ubuntu from the Windows boot menu, but I would like to make it so that the GRUB screen doesn't show up when I select the Ubuntu option. I couldn't get it to work using GRUB Customizer. Anything I can try using those two programs or anything else?

  Read the article

• Uninstalling Vista from dual boot of Win7/Vista

  - by Alex

  Topic title says it all. Right now I have 2 things I need to do... 1) Remove the windows.old folder. My problem with this is that when I go to disk cleanup, the "Remove Previous Window Installations" option isn't there. Not sure what to do here. EDIT: Solved this part. Didn't hit button clean up system files, was just looking at normal disk cleanup window. 2) The rest.. I've read that I should use EasyBCD, but I'm not sure what to do with it once I get it. Any help is appreciated. Thanks. EDIT: I downloaded EasyBCD, and I see the option to add/delete entries. Do I just need to delete the Vista entry, or is there more to it than that?

  Read the article

• kvm-switch, dual monitor, only share one monitor

  - by lydonchandra

  Hi, Setup: 2 physical machines, and 3 LCD monitors, each machine has its own LCD monitor, and I would like to share the 3rd LCD monitor using KVM-switch. Is this possible? (I have already shared the keyboard and mouse using Synergy.)

  Read the article

• Dual monitors through 1 HDMI port

  - by Carlos

  I currently have a Dell Studio XPS 13 laptop connected to a 24" HP monitor (w2448hc). Im thinking on getting a second one, however am wondering what i need for the setup (hardware wise). Also I was wondering it there is any down side to it, or something i should be aware of. For example, image quality loss, GPU overloading, or anything important I should know. More than anything Im interested in your advice. Also the monitors do have built in speakers (HDMI sound output), is the sound going to be reproduced by only one monitor or both? Specs Model: Dell Studio XPS 13 OS: Genuine Windows® 7 Home Premium 64-Bit CPU: Intel® CoreTM 2 Duo P8600 (2.4GHz, 3MB L2 Cache, 1067MHz FSB) Chipset: NVIDIA® GeForce® MCP79MX RAM: 4GB 1067MHz DDR3 SDRAM Graphics: SLi NVIDIA® GeForce® 9500M - 256MB Thanks for your advice, if there is anything additional i need to buy an you have a personal preference pass the brand name so i can check it out. Thanks!

  Read the article

• Dual monitors though 1 HDMI port

  - by Carlos

  I currently have a Dell Studio XPS 13 laptop connected to a 24" HP monitor (w2448hc). Im thinking on getting a second one, however am wondering what i need for the setup (hardware wise). Also I was wondering it there is any down side to it, or something i should be aware of. For example, image quality loss, GPU overloading, or anything important I should know. More than anything Im interested in your advice. Also the monitors do have built in speakers (HDMI sound output), is the sound going to be reproduced by only one monitor or both? Specs Model: Dell Studio XPS 13 OS: Genuine Windows® 7 Home Premium 64-Bit CPU: Intel® CoreTM 2 Duo P8600 (2.4GHz, 3MB L2 Cache, 1067MHz FSB) Chipset: NVIDIA® GeForce® MCP79MX RAM: 4GB 1067MHz DDR3 SDRAM Graphics: SLi NVIDIA® GeForce® 9500M - 256MB Thanks for your advice, if there is anything additional i need to buy an you have a personal preference pass the brand name so i can check it out. Thanks!

  Read the article

• How to split Emacs over a dual monitor?

  - by Roberto Aloi

  I would like to split Emacs over a double monitor. How do I do that?

  Read the article

• Dual Monitors don't wake up...

  - by serhio

  Recently I put my second monitor on my computer. I have now two connections on my ATI graphic card: a VGA and newly added a DVI one. like this: Sine that, I need to start my computer with monitors powered ON, because if I do it after, thay does not "get up" and says that is "no video entry". Also, if I switch OFF my monitors when computer works, switching ON lets them in the sleep state... How can I fix this issue.

  Read the article

• Is Prime95 a dual-core tool?

  - by Ssvarc

  Does Prime95 use multiple cores? (Is there a difference in this regard between running it from Windows, UBCD, or UBCD4Win?) If it doesn't, are there tools out there that will (preferably via a boot disc)? Thanks!

  Read the article

• Boot disc Dual-Core CPU stress tool

  - by Ssvarc

  Looking for a tool that can test a daul-core cpu via a boot disc, thus bypassing Windows (and ensuring that only the hardware is being tested). UBCD4Win's included Prime95 is an older version and it can't run two threads at once. Ditto for UBCD. Any idea? And while I'm asking, is there a boot tool for GPU's? Thanks!

  Read the article

• Put one monitor of a dual monitor windows system into standby

  - by Psycogeek

  Standby not Disabled! When running 2 monitors on windows 7 or Windows XP, I would like to be able to put one of the monitors at a time into standby. The method can be manual. When running 2 monitors , the second monitor is not always needed, shutting off the monitors own power switch will turn off the monitor, that does work Ok. Problems with that are , the delay with the monitor logo at turn on, and the power switch is not very accessable, and the switch might not live forever turning it on and off so many times. Using disable methods like devcon, WIN-P and Display, causes all the windows to properly move to the other monitor. While that is what a person would want to happen so they can get hold of the windows, that is not what I want to happen, and some things on the other monitor have to be re-arranged after a re-enable. By putting it into standby mode, nothing changes other than the monitor going into standby. Disconnecting the DVI cable still can cause the system to (properly) shift all the windows over to the one monitor, just like any of the disable methods do. That makes a mess of the windows, and is so unacceptable, that I would prefer to leave the monitor on, wasting power and the hardware, when it could easily go into standby for some time. For both monitors I am using a "MonitorOff" program that puts both monitors into standby, but I can not find a utility that will put only ONE monitor into standby for the windows system. If someone comes along and suggests "ultramon" you must know for a fact that it will put One of either of the monitors into actual standby. And it does not really suit me to use ultramon, I tested it (it was nice) and I did not feel that it was a program I wanted. The 2 monitors are running off of an ATI 4890 card, they are both hooked up DVI-I, the OS is both Windows 7 (primary) and Windows XP. In addition it would also be interesting to have seperate standby activity timers, and follow mouse kind of standby changes, but any manuel method , shortcut, batch , tray, or gadget kind of operation would be a good start.

  Read the article

• Keyboard, Dual Monitor Question

  - by Dmn

  Im about to get a 23inch Monitor to connect to my laptop for programming, and general multimedia besides. (this is the monitor what do you think? LG 23" LCD And would you recommend getting a keyboard to use (ie not using the laptop one?) seems like it would be kinda awkward otherwise. This is the keyboard im looking at because it seems to have the low laptop style keys. ||| tigerdirect .com/applications/SearchTools/item-details.asp?EdpNo=5214790&sku=L23-0054 ||| or would you recommend something different? Thanks

  Read the article

• how to uninstall ubuntu 8 from ubuntu 10 dual boot

  - by umar

  I have ubuntu 8.04 and ubuntu 10.04 on my laptop, and i want to reclaim all the ubuntu 8 space so that i have just one operating system on my laptop. how can i do it? the output of sudo fdisk -l is as follows: sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x31a431a3 Device Boot Start End Blocks Id System /dev/sda1 * 1 4959 39833136 83 Linux /dev/sda2 4960 5233 2200905 82 Linux swap / Solaris /dev/sda3 5234 12852 61192552 83 Linux /dev/sda4 12852 19458 53062657 5 Extended /dev/sda5 12852 19182 50847744 83 Linux /dev/sda6 19182 19458 2213888 82 Linux swap / Solaris i dont know which of sda1, ..., sda 6 etc ubuntu 8 is on. how can i find that out? The actual task is that i think a lot of space is devoted to ubuntu 8, if there is no easy way to get rid of it, then i want to repartition the disk so that about 50 GB of hard disk space is given to ubuntu 10's home folder from the ubuntu 8's home folder. but i hope that there is an easy way to get rid of ubuntu 8 alrogether and just have ubuntu 10 on my system.

  Read the article

• Dual boot Windows XP 32 bit and Windows 7 64-bit

  - by Santanu Roy

  My system config is AMD phenom-II x2 550 processor, 2x2gb(800fsb)ddr2 zion ram, gigabyte ga-m61pme-s2 motherboard, 160gb sata hdd. Now I am planning to install Windows XP sp3 (32-bit) and Windows 7 (64bit). My first questions are: Is my system enough for the above mentioned two OSes? Which OS one should be installed first on local disk c: drive? I have both XP and vista drivers on separate disks as provided with my motherboard but don't have drivers for win-7, so can I use my vista driver for win-7?

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >