Search Results

Search found 254 results on 11 pages for 'flashing'.

Page 9/11 | < Previous Page | 5 6 7 8 9 10 11  | Next Page >

  • Green flickering pixels that move with black images

    - by user568458
    Strange question... Occasionally, on my LCD screen, pixels that should be black flicker rapidly and constantly between black and green, about 4 flickers a second. The crazy part is, unlike dead/stuck pixels, they are relative to content on the screen and move with it. For example, I might be looking at a web page with a picture that has lots of black. There might be a couple of green flashing pixels in that black that shouldn't be there. I scroll the page, and the green flickering pixels move with the image. It seems that everyphysical pixel is fine, but somehow something interprets part of the image in a way that causes flickering green... It's not just in a web browser. My first thought was to blame a trolling blogger cunningly uploading an animated gif that simulates a failing pixel... but it happens in a wide range of applications. It seems to occur randomly, other than that it seems to only occur in areas of pure black, and it's always pure 100% green. It happens rarely enough that it's not a big deal, but it's such a strange problem it bugs me. I can't find any info on anything like this. I'm not even sure if it's hardware or software. Any ideas? (windows 7 laptop connected to LCD by DVI to HDMI cable)

    Read the article

  • Mac Finder: WD My Passport won't mount

    - by Matt
    I really need your help. I have a WD My Passport 650GB (with Firewire and USB). I'm using it for almost a year now and it always worked fine. While underway I simply plug it in via Firewire - at home I connect it to my Airport Extreme to have it available as a network storage. Today I connected the hd to my macbookpro (via firewire) and NOTHING. The hd is starting (clearly making a sound and the power-indicator is flashing) but it won't appear in Finder. I also tried it with USB - no sign. I ran Disk Utility and tried to repair the disk. At first try I got a red error line saying that something is wrong with the "headers". However the repair completed with a success message saying that everything is ok. I also verified the hd. Also with a success message. I did that a few times again and unplugged it in between. Never got the error with the headers again - it's always completing and saying everything is ok. However I can't mount the drive. That is what Disk Utility is showing. Any ideas on that? I really need the files on that hd. thank you in advance!

    Read the article

  • Wake-on-lan only works so many times

    - by Chance
    I have Wake-on-lan configured on my Windows XP machine so that the computer will wake up from Standby. Waking the computer from Standby via network traffic seems to work a certain number of times, say 4 or 5, then it stops working. If I restart the computer it seems to reset this behavior so that I can use WOL a few more times before it starts working. I use the command "wol" on my other, Linux machine with the appropriate IP address and MAC address of the card. I looked at the network card to see if it had different lights when WOL worked and when it didn't. When it has a solid amber light where the ethernet cable connects, WOL seems to work. When it has a flashing amber light, WOL does not. It seems that the system seems to almost "shut off" the card when it falls to sleep, but I don't know if this is a function of time or number of standby/wakeups. I have a 3Com 3c920 network card. If I look at the properties in Device Manager, I have "Allow this Device to bring the Computer out of Standby" checked. In the Advanced tab I have anything related to RWU (Remote Wake Up) enabled. I also believe I have the appropriate settings in BIOS related to Remote Wake-Up and I have tried both S1 and S3 power configurations in the BIOS. Intuitively, I would think I would uncheck "Allow the Computer to turn off this device to save power", but doing so disables the "Allow this Device to bring the Computer out of Standby" option. Does anyone know what is happening here or if there is a way to fix it? I have an integrated network card; would getting one that goes into a slot be better? I am running Windows XP on a Dell Optiplex GX240 with a 3Com 3c920 network card.

    Read the article

  • How to get data from a borked Windows Home Server

    - by harhoo
    Yesterday we had a power surge, followed by a power outage. This left my WHS borked: powering on just gives to a flashing blue light (the led on the power supply also flashes green) - no fan or boot activity, nothing. I urgently needed some files off there in the short term (and the 500GB of photos, music, personal video etc in the long term) so I took the hard drive out and put it in my computer. The files and folders showed up, but I couldn't access them - clicking on an image gave an invalid image error in Picasa, I couldn't play MP3s etc. I changed the ownership and permissions of the files, still nothing. I booted in with a LiveCD, the same: files appear, but won't open. Is there anything else I can do? I'm now wondering if it was just the power cable that's broken, but if so, why can;t I access my files from the hard drive? If it is the power cable, and I replace that and the hard drive, will I have done any harm messing around with ownership and file permissions?

    Read the article

  • Screen occasionally flashes black when under load, sometimes does not recover

    - by Oak
    I've built a brand new machine, but to my horror my monitor occasionally flashes black for around a second, then returning to normal. This happens under load (watching videos / playing games) but only sometimes; e.g. it doesn't occur in "Batman: Arkham City" but does in "XCOM: Enemy Unknown". When watching videos, it also occurs when not watching them full-screen, and it sometimes even occurs when the machine isn't doing anything, just sitting at the desktop and moving the mouse around. Has anyone ran into this problem and knows of any solution? Additionally, sometimes after the black screen, it won't return to normal, instead turning completely corrupt. In these cases even quitting the application doesn't help, but physically disconnecting and reconnecting the monitor fixes the problem. This problem did not occur on my earlier machine which used the same physical monitor. Additional details: Windows Server 2012, configured as Windows 8, with latest updates installed NVIDIA GeForce GTX 660 Ti, with latest driver installed Ample amounts of CPU and RAM for playing the above games and for watching videos. I've read about similar problems elsewhere but could not find a working solution: http://www.youtube.com/watch?v=Zt00C-HXFbA&noredirect=1 http://www.sevenforums.com/hardware-devices/59126-monitor-flashing-black.html https://eu.battle.net/d3/en/forum/topic/4079098908?page=4 http://www.tomshardware.com/forum/347422-33-screen-flickering-black-nvidia-driver-update

    Read the article

  • Wired to wireless bridge in Linux

    - by adrianmcmenamin
    I am attempting to set up my Raspberry Pi as a bridge (but I think this is not a question specific to the hardware) - using Debian wheezy. I have a hostapd.conf: (some details changed for security)... interface=wlan0 bridge=br0 driver=nl80211 auth_algs=1 macaddr_acl=0 ignore_broadcast_ssid=0 logger_syslog=-1 logger_syslog_level=0 hw_mode=g ssid=MY_SSID channel=11 wep_default_key=0 wep_key0=MY_KEY wpa=0 (yes, I know WEP is no good) And this in /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp auto br0 iface br0 inet dhcp bridge-ports eth0 wlan0 Everything seems to come up ok, but I cannot associate with the bridged wireless connection - even though the flashing lights on the USB stick suggest packets are being exchanged. I have read somewhere that not all cards/devices will run in hostap mode - they won't pass packets in one direction: is that right? (The info was a bit old)- this my card: [ 3.663245] usb 1-1.3.1: new high-speed USB device number 5 using dwc_otg [ 3.794187] usb 1-1.3.1: New USB device found, idVendor=0cf3, idProduct=9271 [ 3.804321] usb 1-1.3.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 3.816994] usb 1-1.3.1: Product: USB2.0 WLAN [ 3.823790] usb 1-1.3.1: Manufacturer: ATHEROS [ 3.830645] usb 1-1.3.1: SerialNumber: 12345 So, what have I got wrong here?

    Read the article

  • dd on entire disk, but do not want empty portion

    - by Jonathan Henson
    I have a disk, say /dev/sda. Here is fdisk -l: Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0000e4b5 Device Boot Start End Blocks Id System /dev/sda1 * 1 27 209920 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 27 525 4000768 5 Extended Partition 2 does not end on cylinder boundary. /dev/sda5 27 353 2621440 83 Linux /dev/sda6 353 405 416768 83 Linux /dev/sda7 405 490 675840 83 Linux /dev/sda8 490 525 282624 83 Linux I need to make an image to store on our file server for use in flashing other devices we are manufacturing so I only want the used space (only about 4gb). I want to keep the mbr etc... as this device should be boot ready as soon as the copy is finished. Any ideas? I previously had been using dd if=/dev/sda of=[//fileserver/file], but at that time, my master copy was on a 4gb flash ide.

    Read the article

  • Flash Backed Write Cache (FBWC) without capacitor pack

    - by Martyn
    I brought a HP Smart Array P410 controller and it is installed and working fine in a HP Prolient Microserver with 4 drives in two RAID 1 arrays. I didn’t realise however that it came without any cache so would only work by directly writing straight to the disk, and the performance was horrible. So I then brought the 512MB Flash Backed Write Cache (FBWC) memory module as I was under the impression that with FBWC I would not need a battery. I got this idea from a forum post. "What do you guys think of the choice between 'BBWC' (battery backed write cache) and 'FBWC' (flash backed write cache)? The flashed based ones use non-volitile memory so need no battery." After installing the cache module however the server pretty much won’t boot. The P410 has a flashing amber light on it, and from the manual that doesn’t sound good. I’ve managed to get to the on board BIOS once and even managed to get to boot to the HP Array Configuration Utility (ACU) CD once, but every other time the Server continuingly reboots once it get to the POST screen and reads ARRAY INITILIZING %%%. The one time I reached the ACU, it reported a problem with the Cache Module. To me, it seems like the cache module is faulty, however the supplier tells me “Do you have an FBWC battery pack, p/n 587324-001, because that is required for the cache to work. If you have it, please complete an RMA form and we'll send a replacement / credit.” Does this sound right to you? I’ve been ordering the parts from the US and I don’t want to spend $77 + $40 p&p on a battery, wait a week for the shipping to find the card is faulty, and I don’t want to send back a working card?

    Read the article

  • Booting an Asus EeePC from a LiveCD USB stick

    - by Bryan
    I have two identical Asus EeePC netbooks that are both installed with Ubuntu. One of them was sitting on the closet shelf and the battery went completely dead. When I charged the battery and tried to boot the it, I got the "No init found" error. In trying to follow the suggested way to fix it posted here, I used the Startup Disk Creator on my Ubuntu 11.10 desktop machine to create a USB stick with a bootable Ubuntu 11.10 live CD on it (the netbook doesn't have a CD drive). I plugged the USB stick into the netbook with the init issues, went into the BIOS and selected the USB stick as the 1st choice to boot from, and did a hard restart. It then just stuck at the flashing underscore. Not knowing why it wasn't working, I tried booting my working netbook from the USB stick. When I got into the BIOS on the working netbook, I noticed the description in the boot order section for the USB device was different. On the non-working netbook, the description was SWISSBIT (the name of the USB stick) but on the working netbook it was just "Rem. Drive". I also noticed on the working netbook there was an additional option under the bootable order section that allowed me to choose which hard drive to boot from. This section showed two hard drives, one of them being my USB stick. So, rather than changing the device boot order, I selected the USB stick as the hard drive to boot from first and it worked like a champ - I was able to boot into the LiveCD on the USB stick. Seems to me the working netbook is seeing the LiveCD USB stick as a hard drive, where-as the non-working netbook is seeing it as a plain ol' USB stick. The BIOS is the exact same version on both netbooks... any idea why it works on one and not on the other?

    Read the article

  • computer freezes but music continues

    - by Danny
    Recently I have had a problem where my computer will freeze completely but if I happen to be streaming Pandora in a tab that will continue playing. If I wait about 2-5 minutes it will eventually come back and start working normally. I also noticed that during the period that it is unresponsive that the HDD activity light stays lit the whole time, not flashing. I've ran memtest86+ and a diagnostic from Western Digital for my HDD model and none of them reported any errors. The specs for my computer are 1 x ASRock H55M/USB3 R2.0 LGA 1156 Intel H55 HDMI USB 3.0 Micro ATX Intel Motherboard 1 x CORSAIR Enthusiast Series CMPSU-550VX 550W ATX12V V2.2 SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply 1 x Intel Core i3-540 Clarkdale 3.06GHz LGA 1156 73W Dual-Core Desktop Processor Intel HD Graphics BX80616I3540 1 x G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ 1 x ASUS PCE-N13 PCI Express 150/300Mbps Transfer/Receive Rate Wireless Adapter 1 x EVGA 01G-P3-1556-KR GeForce GTX 550 Ti (Fermi) FPB 1GB 192-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card I can't imagine what would be causing these problems.

    Read the article

  • ASUS laptop doesn't charge/use the battery after reinstalling Windows 7

    - by Stan
    I've done a clean install of Windows 7 x64 on an ASUS X501A laptop. The battery is detected and shows in the system tray as "plugged in, charging". However the charge level stays at 76% and if the AC cord is plugged out the laptop turns off. The laptop does not turn on without being plugged in either. Everything worked perfectly prior to reinstall. I've tried: Downloading and installing all the ASUS drivers, including the ATK ACPI driver Checking the BIOS - there do not seem to be any battery-related settings Flashing the BIOS to the latest version Uninstalling Microsoft ACPI-Compliant Control Method Battery in device manager as suggested on the internet Full power discharge/ATX reset as suggested by ASUS support: remove mains power charger, remove battery, press and hold power button for 10 seconds, reconnect battery and mains and turn on I have a feeling all this may have something to do with the EFI BIOS that comes on the laptop. During the reinstall I had to delete all partitions and start anew, because the Windows installer complained about the improper order of GPT partitions. The EFI System Partition was recreated by the installer, and I am guessing that it may be missing the particular ACPI driver needed to make the battery work. I've tried researching this, but could not come up with any useful info. I am hoping someone here may know a bit more about this and maybe help me understand what's going on and how to fix it. Barring that, I'll have to re-image the drive off an identical ASUS laptop with stock install and hope it fixes things.

    Read the article

  • Grub rescue, unknown file system. Can't boot into Windows 7

    - by Sam J
    So, I'm confused, so I'm also going to use this question to get clarification and fix my computer. So, some background: I had Windows 7 on a 1 TB HDD and decided to partition my hard drive into two ~500 GB, one for Windows 7 and one for Ubuntu or whatever flavour I desired (like a sandbox partition...) I installed Ubuntu but the installation had issues so I decided to uninstall. Note before uninstallation I had to press f12 when I turned on to boot from my primary HDD, then choose what OS I wanted to use. Undesirable, but it worked. Anyway, after I decided to uninstall Ubuntu I went into Windows 7 Start Computer Manage and deleted the EXT4 filesystem (Ubuntu parition) giving me 4xx GB of free space. However when I restarted Windows 7, I am now unable to boot Windows. When I DON'T hit f12, I see a blank screen with a flashing underscore. When I DO hit f12, I choose my primary HDD, and then I get a GRUB error: Unknown filesystem: grub rescue _ Something I'm unclear of: GRUB boots linux partitions, right? What boots Windows? Is GRUB "overwriting" the Windows bootloader? How can I completely get Windows back to normal? (IE, It boots automatically without hitting f12.) Thanks for any help, I'm on a live CD version of Ubuntu right now until I can get back on Windows.

    Read the article

  • Input/output error reading USB backup drive on CentOS 6.4

    - by Kev
    I'm suddenly seeing some strange behaviour on our USB backup drive that doesn't make sense to me: (2013-10-21 14:58:23 [root@newdc /]$ cd /mnt/backup/ (2013-10-21 14:59:03 [root@newdc backup]$ ls -la ls: reading directory .: Input/output error total 0 (2013-10-21 14:59:05 [root@newdc backup]$ df -h /mnt/backup Filesystem Size Used Avail Use% Mounted on /dev/sda1 917G 843G 28G 97% /mnt/backup How is it possible for the OS to know how much is in use, but I can't ls any of it as root? Or more to the point, what problem does this indicate? /var/log/messages said this: Oct 21 14:57:54 g5 kernel: EXT4-fs error (device sda1): ext4_journal_start_sb: Detected aborted journal Oct 21 14:57:54 g5 kernel: EXT4-fs (sda1): Remounting filesystem read-only But...read-only is something different than 'throw an io error'... After unmounting to try fsck on it, I had someone on-site look at it, and the drive was not spun up, and had a slow-flashing light, which I believe means it was in a power-suspend mode. So I had them unplug and replug the USB cable, and now (before remounting) it says: fsck from util-linux-ng 2.17.2 e2fsck 1.41.12 (17-May-2010) /dev/sda1: clean, 2805106/61046784 files, 181934167/244182016 blocks I then mount it and now ls works and df reports: Filesystem Size Used Avail Use% Mounted on /dev/sda1 917G 680G 191G 79% /mnt/backup What would cause it to go into such a state without being asked to? Why all the weird behaviour, and now it appears to not be corrupt?

    Read the article

  • netbook screen stays black

    - by sam113101
    I have an acer aspire one netbook. The screen is black but the computer turns on (LED's are on, fan is spinning, etc.) By black I mean absolutely no backlight. I tried to remove the battery and power it on to "discharge" it (I read that on the Internet, not sure if that ever fixes anything), but no luck. I also tried to replace the RAM stick with another one (which I know for sure is working properly), still no luck. I tried to connect an external monitor and switch to it (fn + f5 on this particular model), still no luck, nothing on the external monitor. I read that flashing the BIOS could fix it (http://community.spiceworks.com/how_to/show/22042-acer-aspire-one-black-screen-of-death), I tried to flash it but basically it doesn't do anything when I power it on with the usb thumb drive. No blinking power button. To me it sounds like it might be a dead motherboard, a dead RAM slot (there's only one), or the BIOS thing. I would like to rule out the BIOS possibility, but I need help. The reason I ruled out the dead screen possibility is that it did not switch to the external display when I pressed fn + f5, am I wrong by assuming so? Thank you for your help.

    Read the article

  • Build Explorer version 1.1 for Visual Studio Team Explorer is released

    - by terje
    Our free extension to Visual Studio , the folder based Build Explorer Version 1.1 has now been released, and uploaded to the Visual Studio Gallery and Codeplex. We have collected up a few changes and some bugs, as follows: Changes: Queue Default Builds can now be optionally fully enabled, fully disabled or enabled just for leaf nodes (=disabled for folders).  If you got a large number of builds it was pretty scary to be able to launch all of them with just one click.  However, it is nice to avoid having the dialog box up when you want to just run off a single build.  That’s the reasoning between the 3rd choice here. Auto fill-in of the builds at start up and refresh  This was a request that came up a lot, and which was also irritating to us.  When the Team Project is opened, the Build explorer will start by itself and fill up it’s tree. So you don’t need to click the node anymore. There was also quite a bit of flashing when the tree filled up, this has been reduced to just a single top level fill before it collapses the node. The speed of the buildup of the tree has also been increased. The “All Build Definitions” node is now shown on top of the list Login box appeared in certain cross domain situations. This was a fix for the TF30063 authentication problem we had in the beginning.  Hopefully the new code has that fixed properly so that both the login box and the TF30063 are gone forever.  Our testing so far seems to indicate it works.  If anyone gets a real problem here there are two workarounds: 1) Turn off the auto refresh to reduce the issue. If this doesn’t fix it, then 2) please reinstall the former version (go to the codeplex download site if you don’t have it anymore)  Write a comment to this blog post with a description of what happens, and I will send a temporary fix asap. Bug fixes: The folder name matching was case sensitive, so “Application.CI” and “application.CI” created two different folders.  View all builds not shown for leaf odes, and view builds didn’t work in all cases.  There was some inconsistencies here which have been fixed. Partly fixed:  The context menu to queue a new build for disabled builds should be removed, but that was a difficult one, and is still on the list, but the command will not do anything for a disabled build. Using the Queue Default Builds on a folder, and if it had some disabled builds below an error box appeared and ruined the whole experience. As a result of these fixes there has been introduced some new options, as shown below:   The two first settings, the Separator symbol and the options for how to handle Queuing of default builds are set per Team Project, and is stored in the TFS source control under the BuildProcessTemplates folder, with the name Inmeta.VisualStudio.BuildExplorer.Settings.xml The next two settings need some explanations.  They handle the behavior for the auto update of the build folders.  First, these are stored in the local registry per user, at the key HKEY_CURRENT_USER/Software\Inmeta\BuildExplorer. The first option Use Timed Refresh at Startup, if turned off, you will need to click the node as it is done in Version 1.0.  The second option is a timed value, the time after the Build explorer node is created and until the scanning of the Build folders start.  It is assumed that this is enough, and the tests so far indicates this.  If you have very many builds and you see that the explorer don’t get them all, try to increase this value, and of course, notify me of your case, either here or on the Visual Gallery site.

    Read the article

  • Ubuntu 11.04 and 10.04 hang with black screen while installing from USB disk

    - by Bill
    I've been trying to install Ubuntu 11.04 from a USB flash stick and each time I try to boot from the USB key one of two things happen: A) The screen that asks you what you would like to do (e.g. run Ubuntu from the USB key or install it) shows up and the countdown to the default option starts to count down but as soon as I either touch the keyboard (sometimes I press enter or the arrow keys to select an option) or the countdown gets to zero the screen just locks up and nothing happens no matter how long I wait. B) When I boot from the USB key the screen will flicker for a second and then go black with a flashing white underscore at the top left corner of the screen. Again it doesn't matter how long I wait, nothing happens and pressing keys doesn't do a thing. The very first time I tried to install it I got a terminal-like screen that said something about a directory called 'casper' having an error of some sort. I have tried installing from USB using both 11.04 and 10.10. I'm about to try 10.04. I have read tons of forum posts about this but so far I haven't seen anything in the solutions that apply to me. My intention is to dual boot Windows 7 and Ubuntu. I must keep Windows as I am required to use Visual Studio for one of my college courses. Right now I'm using Wubi but I really want a full install. I can't use LVPM because it doesn't work with the version of Wubi I used. So now I'm thinking my best bet is to try to get a clean install working. I'd also convert Wubi to a full install too but there's no solution as far as I've read. So could someone tell me a reason why this is happening or if there's something I can do to get around the problem? I'm using a Gateway LT2802u netbook with and Intel Atom N455 processor, 1GB RAM, Intel Graphics Media Accelerator 3150 graphics card, and a 250GB HDD. I don't have anything on my current Wubi install that I can't replace so keep in mind when answering that I don't care if I lose my current settings and files from Wubi. Thanks everyone! UPDATE I just answered my own question so in case anyone else is having this same problem using similar hardware, do the following: When I first tried installing 11.04 I used the recommended universal installer tool to create the USB live/installation disk. That caused the original problem. Note that I had already downloaded the 11.04 ISO and did not use the included downloader from the USB creator. After that failed I used the same USB creator but had it download 10.10 for me. It also failed with the same issue. I repeated this process with unetbootin as well for both versions. Finally, I downloaded the Ubuntu 10.04 ISO and used the recommended USB creator once again. There was an error while creating the USB live install so I reformatted the USB key as FAT32 and tried again. It created the USB key. I then booted from the USB flash drive and selected "Install Ubuntu" (exact wording was different). It worked! It took me through the process that you see shown in pictures on the Ubuntu website. I let it create the appropriate partitions for me and it simply worked. I did get a few errors while the system tried to restart after it installed. It hung on a terminal-like screen but I pressed ENTER and it restarted. I booted into Windows 7, it checked the disks as it sensed that I messed with a partition, then it booted into Windows normally. Now I'm going to uninstall Wubi and update my new full install of Ubuntu! I'm excited to get the benefits of a full install now. So in the end, hopefully someone can learn from what I did.

    Read the article

  • Desktop login fails, terminal works

    - by Tobias
    I have a freshly setup 12.04 LTS pc system (120 GB SSD, 1 TB HDD, 16 GiB RAM); since a few days, I can't login to the graphical desktop anymore: there is very short flashing shell window which disappears very quickly, and I'm confronted with the login screen again. I believe there is something about modprobe and vbox, but I can't read it fast enough ... I can login to a terminal (Ctrl+Alt+F1). It did not help to chown all contents of my home directory to me:my-group, like suggested here. This is what I could find in /var/log, grepping for the date and time (I inserted linebreaks after <my-hostname>; real time values preserved): auth.log: <date> 22:43:01 <my-hostname> lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "tobias" <date> 22:43:08 <my-hostname> lightdm: pam_unix(lightdm:session): session closed for user lightdm <date> 22:43:08 <my-hostname> lightdm: pam_unix(lightdm:session): session opened for user tobias by (uid=0) <date> 22:43:08 <my-hostname> lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0 <date> 22:43:08 <my-hostname> lightdm: pam_unix(lightdm:session): session closed for user tobias <date> 22:43:09 <my-hostname> lightdm: pam_unix(lightdm:session): session opened for user lightdm by (uid=0) <date> 22:43:09 <my-hostname> lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0 <date> 22:43:10 <my-hostname> lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "tobias" <date> 22:43:10 <my-hostname> dbus[756]: [system] Rejected send message, 2 matched rules; type="method_call", sender="1:43" (uid=104 pid=1639 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.15" (uid=0 pid=1005 comm="/usr/sbin/console-kit-daemon --no-daemon ") kern.log: <date> 22:43:00 <my-hostname> kernel: [ 16.084525] eth0: no IPv6 routers present syslog: <date> 22:43:00 <my-hostname> kernel: [ 16.084525] eth0: no IPv6 routers present <date> 22:43:01 <my-hostname> ntpdate[1492]: adjust time server 91.189.94.4 offset -0.162831 sec <date> 22:43:08 <my-hostname> acpid: client 969[0:0] has disconnected <date> 22:43:08 <my-hostname> acpid: client connected from 1553[0:0] <date> 22:43:08 <my-hostname> acpid: 1 client rule loaded I have Virtualbox and Truecrypt installed, but I can't think of a reason why they might prevent a graphical login. I'm confused: What is this about requirement "user ingroup nopasswdlogin" not met? I do login using a password, and the password works ok when logging in to a terminal! Can I somehow read the error output, e.g. by delaying it, redirecting it to a file, or having the system prompt me for pressing a key? Has possibly any recent update caused my problem? Should I install the pending updates? How, btw, without access to the graphical UI? I have some working knowledge about the Linux shell, but I'm new to Ubuntu. Any help would be appreciated.

    Read the article

  • It’s official – Red Gate is a great place to work!

    - by red@work
    At a glittering award ceremony last week, we found out that we’re officially the 14th best small company to work for in the whole of the UK! This is no mean feat, considering that about 1,000 companies enter the Sunday Times Top 100 best companies awards each year. Most of these are in the small companies category too. It's the fourth year in a row for us to be in the Top 100 list and we're tickled pink because the results are based on employee opinion. We’re particularly proud to be the best small company in Cambridge (in the whole of East Anglia, in fact) and the best small software development company in the entire UK. So how does it all work? Well, 90% of us took the time to answer over 70 questions on categories such as management, benefits, wellbeing, leadership, giving something back and what we think of Red Gate as a whole. It makes you think about every part of day to day working life and how you feel about it. Do you slightly or strongly agree or disagree that your manager motivates your to do your best every day, or that you have confidence in Red Gate's leaders, or that you’re not spending too much time working? It's great to see that we had one of the best scores in the country for the question "Do you think your company takes advantage of you?" We got particularly high scores for management, wellbeing and for giving something back too. A few of us got dressed up and headed to London for the awards; very excited about where we’d place but slightly nervous about having to get up on stage. There was a last minute hic up with a bow tie but the Managing Editor of the Sunday Times kindly stepped in to offer his assistance just before we had our official photo taken. We were nominated for two Special Recognition Awards. Despite not bringing them home this year, we're very proud to be nominated as there are only three nominations in each category. First we were up for the Training and Development award. Best Companies loved that we get together at lunchtimes to teach each other photography, cookery and French, as well as our book clubs and techie talks. And of course they liked our opportunities to go on training courses and to jet off to international conferences. Our other nomination was for the Wellbeing award. Best Companies loved our free food (and let’s face it, so do we). Porridge or bacon sandwiches for breakfast, a three course hot dinner, and free fruit and cereals all day long. If all that has an affect on the waistline then there are plenty of sporty activities for us all to get involved in, such as yoga, running or squash. Or if that’s not your thing then a relaxing massage helps us all to unwind every few months or so. The awards were hosted by news presenter Kate Silverton. She gave us a special mention during the ceremony for having great customer engagement as well as employee engagement, after we told her about Rodney Landrum (a Friend of Red Gate) tattooing our logo on his arm. We showed off our customised dinner jacket (thanks to Dom from Usability) with a flashing Red Gate logo on the back and she seemed suitability impressed. Back in the office the next day, we popped open the champagne and raised a glass to our success. Neil, our joint CEO, talked about how pleased he was with the award because it's based on the opinions of the people that count – us. You can read more about the Sunday Times awards here. By the way, we're still growing and are still hiring. If you’d like to keep up with our latest vacancies then why not follow us on Twitter at twitter.com/redgatecareers. Right now we're busy hiring in development, test, sales, product management, web development, and project management. Here's a link to our current job opportunities page – we'd love to hear from great people who are looking for a great place to work! After all, we're only great because of the people who work here. Post by: Alice Chapman

    Read the article

  • Software Update Notifications

    - by devio
    I am considering implementing some sort of Software Update Notification for one of the web applications I am developing. There are several questions I came across: Should the update check be executed on the client or on the server? Client-side means, the software retrieves the most current version information, performs its checks, and displays the update information. Server-side check means the software sends its version info to the server, which in turn does the calculations and returns information to the client. My guess is that server-side implementation may turn out to be more flexible and more powerful than client-side, as I can add functionality to the server easily, as long as the client understands it. Where should the update info be displayed? Is it ok to display on the login screen? Should only admins see it? (this is a web app with a database, so updating requires manipulation of db and web, which is only done by admins). What about a little beeping flashing icon which increases in size as the version gets more obsolete every day ;) ? Privacy issues Not everybody likes to have their app usage stats broadcast over the internet. TheOnion question: What do you think?

    Read the article

  • How do I capture a WinForm window to a bitmap without the caret

    - by Steve Dunn
    I've got window on a WinForm that I want to get the bitmap representation of. For this, I use the following code (where codeEditor is the control I want a bitmap representation of): public Bitmap GetBitmap( ) { IntPtr srcDC = NativeMethods.GetDC( codeEditor.Handle ) ; var bitmap = new Bitmap( codeEditor.Width, codeEditor.Height ) ; Graphics graphics = Graphics.FromImage( bitmap ) ; var deviceContext = graphics.GetHdc( ) ; bool blitted = NativeMethods.BitBlt( deviceContext, 0, 0, bitmap.Width, bitmap.Height, srcDC, 0, 0, 0x00CC0020 /*SRCCOPY*/ ) ; if ( !blitted ) { throw new InvalidOperationException( @"The bitmap could not be generated." ) ; } int result = NativeMethods.ReleaseDC( codeEditor.Handle, srcDC ) ; if ( result == 0 ) { throw new InvalidOperationException( @"Cannot release bitmap resources." ) ; } graphics.ReleaseHdc( deviceContext ) ; graphics.Dispose( ) ; The trouble is, this captures the caret if it's flashing in the window at the time of capture. I tried calling the Win32 method HideCaret before capturing, but it didn't seem to have any effect.

    Read the article

  • MFC (C++) CDialog DoModal() not working as expected

    - by krebstar
    Hi, I have a plugin that is loaded by this application.. This plugin calls some dialog boxes with DoModal(). I'm expecting these dialog boxes to function like this: If I click on the application window behind the dialog box, the dialog box flashes and does not allow the application to be in focus. However, in one of the other dialog boxes, called with DoModal(), if I click on the application window, it doesn't do the flashing thing, and after a while the application's close/minimize buttons become active (well, just the color). They're not really active and the window turns somewhat white and the title bar says (Not Responding)... What could possibly be wrong and how do I fix it? I've tried setting the dialog box's properties to System Modal: True, and Set Foreground: True but it doesn't seem to work.. :( Thanks.. EDIT: I'd like to note that the in the Windows taskbar, there is only one entry for the application for the correct behavior, but when the dialog box with the incorrect behavior is launched, another "window" is launched.. So it looks like (Application)(Dialog box title).. The effect I'm trying to achieve is just (Application)..

    Read the article

  • Show/hide text based on optgroup selection using Jquery

    - by general exception
    I have the following HTML markup:- <select name="Fault" class="textbox" id="fault"> <option>Single Light Out</option> <option>Light Dim</option> <option>Light On In Daytime</option> <option>Erratic Operating Times</option> <option>Flashing/Flickering</option> <option>Causing Tv/Radio Interference</option> <option>Obscured By Hedge/Tree Branches</option> <option>Bracket Arm Needs Realigning</option> <option>Shade/Cover Missing</option> <option>Column In Poor Condition</option> <option>Several Lights Out (please state how many)</option> <option>Column Leaning</option> <option>Door Missing/Wires Exposed</option> <option>Column Knocked Down/Traffic Accident</option> <option>Lantern Or Bracket Broken Off/Hanging On Wires</option> <option>Shade/Cover Hanging Open</option> </select> <span id="faulttext" style="color:Red; display:none">Text in the span</span> This Jquery snippet adds the last 5 options into an option group. $('#fault option:nth-child(n+12)').wrapAll('<optgroup label="Urgent Reasons">'); What I want to do is, remove the display:none if any of the items within the <optgroup> are selected, effectively displaying the span message, possibly with a fade in transition, and also hide the message if any options outside of the <optgroup> are selected.

    Read the article

  • Can't serve HTML5 video through PHP on Safari/Mac (5.0)

    - by JKS
    I'm encountering a strange bug in Safari where, when I serve MP4 video through PHP (to obfuscate the file beneath the document root with a token-based authentication system), Safari for some reason fires the <video>'s onerror event, and the video never loads (I can't get any useful information out of the event object sent to onerror — everything is undefined). When I access the PHP script directly (i.e., the video is not embedded in a page), the video controls appear momentarily before flashing to a QuickTime question mark. When I access the MP4 file directly, it works as expected. What's bizarre is that the embedded video works perfectly in the latest version of Chrome for Mac. Here are the headers when accessed through PHP: Connection:Keep-Alive Content-Disposition:inline; filename="test.mp4" Content-Length:5558749 Content-Type:video/mp4 Date:Tue, 22 Jun 2010 01:24:25 GMT Keep-Alive:timeout=10, max=29 Server:Apache/2.2.15 (CentOS) mod_ssl/2.2.15 0.9.8l DAV/2 mod_auth_passthrough/2.1 FrontPage/5.0.2.2635 X-Powered-By:PHP/5.2.13 And here are the headers when test.mp4 is accessed directly: Accept-Ranges:bytes Connection:Keep-Alive Content-Length:5558749 Content-Type:video/mp4 Date:Tue, 22 Jun 2010 01:26:45 GMT Etag:"1c04757-54d1dd-489944c5a6400" Keep-Alive:timeout=10, max=30 Last-Modified:Tue, 22 Jun 2010 01:25:36 GMT Server:Apache/2.2.15 (CentOS) mod_ssl/2.2.15 0.9.8l DAV/2 mod_auth_passthrough/2.1 FrontPage/5.0.2.2635 The only differing headers are: Accept-Ranges (which I don't think is necessary), Etag, Last-Modified, Content-Disposition, and X-Powered-By. Not only can Chrome handle the PHP-served video fine, but when I use the same script to load the MP4 through a Flash player, it also works fine. I just can't figure out what Safari is choking on. EDIT: Also, when I change the content disposition to "attachment", Safari will download the MP4 file just fine.

    Read the article

  • Mysterious Flickering Visual Artifact

    - by Axis
    A flashing bar of red appears at the top of the EAGLView that I have added as a subview in my iPhone app. It flickers on and off (i.e., one frame it's there, the next frame it's not, the next frame it's there again). I have removed a lot of code from my app until I'm essentially left with the stock OpenGL-ES project and a few changes: The glview is not fullscreen; it's a subview. I enabled the depth buffer. I'm not even trying to draw anything. If the glview is fullscreen, or if I disable the depth buffer, then there is no flicker and it works fine. But needless to say, this is a 3D view and I'd like to be able to display it within a larger UIKit view. I'm not sure what code would be useful to post, but here's how I add the glview to my main view: appDelegate.glView.frame = CGRectMake(245, 65, 215, 215); [self.view addSubview:appDelegate.glView]; [appDelegate.glView startAnimation]; Here's my render function: - (void) render { [EAGLContext setCurrentContext:context]; glBindFramebufferOES(GL_FRAMEBUFFER_OES, defaultFramebuffer); glViewport(0, 0, backingWidth, backingHeight); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glBindRenderbufferOES(GL_RENDERBUFFER_OES, colorRenderbuffer); [context presentRenderbuffer:GL_RENDERBUFFER_OES]; } It seems pretty obvious to me that the problem lies with the depth buffer somehow, but I'm not sure why. Also, it works fine in the simulator, but not on my iphone. I'm using iPhone OS 3.1. Any ideas on where to look for a problem?

    Read the article

  • 3Ware 9650SE RAID-6, two degraded drives, one ECC, rebuild stuck

    - by cswingle
    This morning I came in the office to discover that two of the drives on a RAID-6, 3ware 9650SE controller were marked as degraded and it was rebuilding the array. After getting to about 4%, it got ECC errors on a third drive (this may have happened when I attempted to access the filesystem on this RAID and got I/O errors from the controller). Now I'm in this state: > /c2/u1 show Unit UnitType Status %RCmpl %V/I/M Port Stripe Size(GB) ------------------------------------------------------------------------ u1 RAID-6 REBUILDING 4%(A) - - 64K 7450.5 u1-0 DISK OK - - p5 - 931.312 u1-1 DISK OK - - p2 - 931.312 u1-2 DISK OK - - p1 - 931.312 u1-3 DISK OK - - p4 - 931.312 u1-4 DISK OK - - p11 - 931.312 u1-5 DISK DEGRADED - - p6 - 931.312 u1-6 DISK OK - - p7 - 931.312 u1-7 DISK DEGRADED - - p3 - 931.312 u1-8 DISK WARNING - - p9 - 931.312 u1-9 DISK OK - - p10 - 931.312 u1/v0 Volume - - - - - 7450.5 Examining the SMART data on the three drives in question, the two that are DEGRADED are in good shape (PASSED without any Current_Pending_Sector or Offline_Uncorrectable errors), but the drive listed as WARNING has 24 uncorrectable sectors. And, the "rebuild" has been stuck at 4% for ten hours now. So: How do I get it to start actually rebuilding? This particular controller doesn't appear to support /c2/u1 resume rebuild, and the only rebuild command that appears to be an option is one that wants to know what disk to add (/c2/u1 start rebuild disk=<p:-p...> [ignoreECC] according to the help). I have two hot spares in the server, and I'm happy to engage them, but I don't understand what it would do with that information in the current state it's in. Can I pull out the drive that is demonstrably failing (the WARNING drive), when I have two DEGRADED drives in a RAID-6? It seems to me that the best scenario would be for me to pull the WARNING drive and tell it to use one of my hot spares in the rebuild. But won't I kill the thing by pulling a "good" drive in a RAID-6 with two DEGRADED drives? Finally, I've seen reference in other posts to a bad bug in this controller that causes good drives to be marked as bad and that upgrading the firmware may help. Is flashing the firmware a risky operation given the situation? Is it likely to help or hurt wrt the rebuilding-but-stuck-at-4% RAID? Am I experiencing this bug in action? Advice outside the spiritual would be much appreciated. Thanks.

    Read the article

< Previous Page | 5 6 7 8 9 10 11  | Next Page >