Search Results

Search found 44309 results on 1773 pages for 'hp command view'.

Page 9/1773 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• HP/IBM alternative to Buffalo iSCSI TerraStation?

  - by Robin Day

  I'm looking at virtualising some of our infrastructure in order to allow for more resiliance and future expandability. We have successfully virtualised on single servers with Direct Attached Storage and are now looking for a more future proof solution using a high powered host (or two) and a SAN (or two). I'm thinking that the host machine will probably be an HP ProLiant DL360 G7 (all of our exisiting infrastructure is HP). Unfortunately, I am new to the world of SANs. From what I can see, the Buffalo Terrastation III is all I would need in order to setup an iSCSI SAN for VMWare to use. However, I'm a little reticent to go that way as it's a bit too "entry level" for my liking. In particular I would be very keen for more redundancy, power, networking, etc. I'm also very aware that you "get what you pay for". Therefore, can anyone reccommend equivalents from the big boys? HP/IBM? I have searched high and low on the HP site and seen many options but am struggling to work out if it is all the hardware I will need. Some options appear to need separate controllers from disk enclosures, etc.

  Read the article

• can not run java program from command line which resides in package

  - by kshitij

  See following code with resides in fillowing directory mypack.pack1 package mypack.pack1; public class myclass { public static void main(String args[]) { System.out.println("KKKKKKKKKKKKKKKKKKKKKKKKKKKKKK"); } } See following screen shot. that is giving error. And i dont want to add anything in class path because i am in particular directory and it has to work. why it is not working.??????

  Read the article

• How to Print or Save a Directory Listing to a File

  - by Lori Kaufman

  Printing a directory listing is something you may not do often, but when you need to print a listing of a directory with a lot of files in it, you would rather not manually type the filenames. You may want to print a directory listing of your videos, music, ebooks, or other media. Or, someone at work may ask you for a list of test case files you have created for the software you’re developing, or a list of chapter files for the user guide, etc. If the list of files is small, writing it down or manually typing it out is not a problem. However, if you have a lot of files, automatically creating a directory listing would get the task done quickly and easily. This article shows you how to write a directory listing to a file using the command line and how to use a free tool to print or save a directory listing in Windows Explorer. Amazon’s New Kindle Fire Tablet: the How-To Geek Review HTG Explains: How Hackers Take Over Web Sites with SQL Injection / DDoS Use Your Android Phone to Comparison Shop: 4 Scanner Apps Reviewed

  Read the article

• Unable to assign command output to a variable

  - by Harish Maralihalli

  I am trying to assign the latest file name obtained from the below ls command but getting some error, it would be very nice if someone can answer how can I fix this! fn=`ls -lrt pur_bom_interface_daily*.log | cut -c59-102 | tail -1` or fn=$(ls -lrt pur_bom_interface_daily*.log | cut -c59-102 | tail -1) Error got: ls: 0653-341 The file pur_bom_interface_daily*.log does not exist Note: pur_bom_interface_daily*.log I am using * since there are multiple files starting their name with pur_bom_interface_daily and concatanated with the date on which they have got created.

  Read the article

• bash command for each file in a folder

  - by Robert

  I have a set of files on which I would like to apply the same command and the output should contain the same name as the processed file but with a different extension. Currently I am doing rename /my/data/Andrew.doc to /my/data/Andrew.txt I would like to do this for all the .doc files from the /my/data/ folder and to preserve the name. I tried several versions but I guess I have something wrong in the syntax as I an new to linux.

  Read the article

• Custom keyboard shortcut to lauch a terminal and run a command in Unity

  - by David Weinraub

  I know this should be the simplest thing, but coming up empty. ;-( I would like to create a keyboard shortcut ctrl-alt-P that opens a terminal window and runs a ping command: ping -c 4 somefixeddomain.com [Useful for quickly checking whether my internet connection is actually working.] I have attempted to do this (in Unity, Ubuntu v11.10) using: Settings > Keyboard > Custom Shortcuts filling in all the obvious stuff, but no luck. All ideas welcome.

  Read the article

• Bash command history not working

  - by user12663

  The command history between sessions is not getting saved. I'm using guake and the history for the session is working fine. I noticed that .bash_history had some commands I executed in sudo -s mode and tried the same again and all the commands while in the session got saved so I tried chmod 777 .bash_history Now the old commands appear at the start of a session but no new commands are getting saved Thanx in advance

  Read the article

• C Minishell Command Expansion Printing Gibberish

  - by Optimus_Pwn

  I'm writing a unix minishell in C, and am at the point where I'm adding command expansion. What I mean by this is that I can nest commands in other commands, for example: $> echo hello $(echo world! ... $(echo and stuff)) hello world! ... and stuff I think I have it working mostly, however it isn't marking the end of the expanded string correctly, for example if I do: $> echo a $(echo b $(echo c)) a b c $> echo d $(echo e) d e c See it prints the c, even though I didn't ask it to. Here is my code: msh.c - http://pastebin.com/sd6DZYwB expand.c - http://pastebin.com/uLqvFGPw I have a more code, but there's a lot of it, and these are the parts that I'm having trouble with at the moment. I'll try to tell you the basic way I'm doing this. Main is in msh.c, here it gets a line of input from either the commandline or a shellfile, and then calls processline (char *line, int outFD, int waitFlag), where line is the line we just got, outFD is the file descriptor of the output file, and waitFlag tells us whether or not we should wait if we fork. When we call this from main we do it like this: processline (buffer, 1, 1); In processline, we allocate a new line: char expanded_line[EXPANDEDLEN]; We then call expand, in expand.c: expand(line, expanded_line, EXPANDEDLEN); In expand, we copy the characters literally from line to expanded_line until we find a $(, which then calls: static int expCmdOutput(char *orig, char *new, int *oldl_ind, int *newl_ind) orig is line, and new is expanded line. oldl_ind and newl_ind are the current positions in the line and expanded line, respectively. Then we pipe, and recursively call processline, passing it the nested command(for example, if we had "echo a $(echo b)", we would pass processline "echo b"). This is where I get confused, each time expand is called, is it allocating a new chunk of memory EXPANDEDLEN long? If so, this is bad because I'll run out of stack room really quickly(in the case of a hugely nested commandline input). In expand I insert a null character at the end of the expanded string, so why is it printing past it? If you guys need any more code, or explanations, just ask. Secondly, I put the code in pastebin because there's a ton of it, and in my experience people don't like it when I fill up several pages with code. Thanks.

  Read the article

• Logging every time a command is run

  - by Tom D

  I want to log every time I run a certain type of command in the terminal. For example, every time I run: sudo apt-get install [something] I want to add [something] to a log file in my home directory that will look like the following: [timestamp] [something] 2012-10-02 mysql-server 2012-10-03 ruby1.9.1 2012-10-06 gedit-plugins 2012-10-07 gnome-panel synaptic What's the easiest way to make this happen automatically?

  Read the article

• HP Network Utility Error

  - by William Ricci

  Using the HP Network Utility to team 2 ports on Windows 2008 R2 Standard results in this error:----- An error occurred when making a call into the operating system. Happens on either of two cards that are installed. This happened before and after upgrading to PSP 9.10. Uninstalled the HP Network Configuration Utility and re-installed version 10.65.0.6. Updated NIC drivers. NC382i DP - HP Broadcom 1Gb Multifunction Driver 7.4.23.0 (from 6.2.9.0) NC365T - Intel E1R 11.14.80.0 (from 11.14.49.0)

  Read the article

• HP SmartArray P400 has slow read and write speed

  - by Tadas D.

  I have desktop in which I installed HP SmartArray P400 controller with two HP DF0146B8052 hard drives. I made RAID0 logical volume from them, but I am getting 20MB/s write speed and ~140-120MB/s read speed. Also there is quite low scatter for benchmark results (I am getting quite nice line) and it looks like controller is "capping" my speeds. I tried reseting controllers configuration and I haven't found any settings in HP ACU (Array Configuration Utility) to help me. I am using Windows 7 Ultimate and M4A78 board Does anyone have ideas what could be wrong? Also I am attaching diagnostic results.

  Read the article

• Configuring RAID1 on HP Proliant Microserver N54L / Ubuntu 14.04.1 LTS [duplicate]

  - by Chris Beach

  This question already has an answer here: Cant find my harddrives in ubuntu installation? 2 answers I've bought a N54L and fitted two 3GB drives. Keen to get set up with RAID1. BIOS: SATA controller mode set to "RAID" RAID Option ROM utility: both physical drives set up as one logical drive When I came to install Ubuntu (14.04.1), both drives appeared during the setup process. I was only expecting to see the logical drive, although I'm a complete novice with RAID. I've read that the HP Proliant Microservers don't have "proper" RAID support, and require some kind of driver to be installed. I've tried a few HP utilities from the following apt repo: deb http://downloads.linux.hp.com/SDR/repo/mcp wheezy/current non-free On installation, most say "server not supported" Would appreciate your advice.

  Read the article

• HP Recovery options: System Recovery not showing

  - by sha404

  I am using HP Pavilion dv4 notebook. Previously, there were following options in Recovery Manager(using f11 during boot): +System Recovery +Factory Restore +Minimized Image Recovery The System Recovery option allows me to restore only Operating system drive e.g. C:\ drive, keeping all other user (me) created hard drives intact. I made a set of recovery disk. Since then I don't see the System Recovery option in HP Recovery Manager. But all other options are still there. But when I use recovery disks that i created earlier, that option e.g. System Recovery is shown. But It's really boring and time consuming to use disks for recovery. So, what's the problem with internal HP Recovery Manager? Why isn't it showing that option?

  Read the article

• Inverted function keys (F1-F12) on HP Pavilion dv4t

  - by The Electric Muffin

  (I know there have already been a lot of questions about this, but none of them mentioned the dv4t specifically.) I'm thinking about getting an HP Pavilion dv4t-4200 or -5100, but something that's really irritating me is that by default the function keys (F1-F12) are "inverted"—without holding the Fn key, the function keys do things like change the brightness, change or mute the volume, and switch to an external display. Only if you hold Fn will they actually produce F1, F2, etc. This is not how keyboards are supposed to work. Is there any way to disable this "feature" that has been verified to work on the HP Pavilion dv4t-4200 or HP Pavilion dv4t-5100? I don't want to buy this computer unless this is possible.

  Read the article

• HP Omni 27-1027c AIO...Upgradeable?

  - by Bobo

  I just bought an HP Omni 27 1057c from Sams Club. I like it a lot, but I want more performance. discovered that the integrated Intel HD 2500 graphics is almost useless for most games. I found a website that says it can be upgraded at http://www.pcmag.com/article2/0,2817,2398314,00.asp. The computers specs can be found at Sams Club website or at HP website HP Product Specs. So what do you think? Can I upgrade Motherboard and Video Card?

  Read the article

• Processor Upgrade HP Elite M9510F

  - by DaveM

  I have an HP 9510F that uses the ASUS IPIBL-LB MB. It ships with an Intel Q8200 Quad Core processor but it does not support virtualization. Specs for the board from HP (ASUS does not list this OEM board) do not show support for the Intel Q8200 it ships with (obviously incorrect) but only these • Supports the following processors: o Intel Core 2 Quad (Yorkfield core) Q9xxx o Intel Core 2 Duo (Wolfsdale core) E8xxx o Intel Core 2 Quad (Kentsfield core) up to Q6600 o Core 2 Duo E6x00 (Conroe core) up to E6700 o Core 2 Duo E4x00 (Conroe core) up to E4400 Can this MB support the Q8400 or will it only support the indicated Q9xxx series? Naturally HP is little help here. Specs are located hereHP/ASUS MB specs

  Read the article

• Ctrl key is broken on HP Envy is broken, where can I find a replacement

  - by NewProger

  I work as a developer so I have to use key combinations a lot. And I have HP Envy laptop. And the Ctrl key is broken for the second time. First time I just took one from my friend. But I don't have any more friends who are willing to sacrifice their Ctrl key Anyone know where I can find one? (or rather a bunch because they are so weak and low quality) I tried to contact HP support but they did everything to prevent people from doing it. And it is impossible to reach HP support. And in my case where warranty is expired it is not possible at all according to their rules. Also I tried Googling but found nothing

  Read the article

• My HP Laptop shows bios error

  - by Precious Tijesunimi

  Sometimes, when I startup my HP Laptop I get a message like this (I am not accurately sure of the message but it is something like this) HP Bios Startup error The selected bios file was not found. It is either corrupt or missing Please visit http://hp.com/go/techcenter/startup Please Press ENTER - to Continue. When I press enter nothing bad happens, My System Just starts up normally. I have had a similar problem with my desktop but whenever I press enter, The computer restarts and doesn't startup. I was told that a Virus had attacked my system. I am very worried. Is the same thing happening here?, How will it affect my system? and What can I do?

  Read the article

• Printing documents on HP printer very slow

  - by maxim

  I have a strange problem with HP drivers. I have configured a HP printer 2025dn with LAN connection, on 3 pc, using the cd rom of HP driver. All works well, but sometimes for certain documents the time for printing is very slow and long. I observe during this situation, in task manager, a process called rundll32.exe loads CPU at 100%. If I kill that process the printer starts printing fast the document in the queue. I wondering the reason of this strange behaviour.

  Read the article

• Why does HP Update at remote system trigger RDP printing at local system?

  - by lcbrevard

  This is obscure. When connected with RDP to another system that has HP Update installed on it, either directly running the HP Update or having the notification pop up to ask if you want to run HP Update causes the local system to try to print something to peculiarly-chosen-local-printer. Case 1: Desktop Win 7 Ult system RDP connected to HP Laptop Win 7 Ult system. When HP Update runs on the laptop a dialog for XPS Writer Save As... appears on Desktop system. Even if you put in a name, nothing gets generated and the dialog repeats. And repeats. Until you (a) close the RDP connection and (b) clean out the queued entries. If the HP Update pops up the request to run the update and you are not at the desk when this happens, there can be dozens of queued requests for this bogus printing. NOTE: the XPS Writer is not selected as a default printer on either system. Case 2: (Different) HP Laptop Win 7 Ult system RDP connected to XP Pro "brand X" desktop system but with HP printer drivers installed. If the request to run HP Update notification pops on the XP system, dozens of attempts to print, in this case to a Versa Check Printer driver, are queued. Dismissing the HP request, closing RDP, and cleaning out the queue are required to stop this. NOTE: the Versa Check Writer is not selected as a default printer on either system. THE QUESTION: What the heck is going on here? Some kind of scripting or COM activity that is misdirected?

  Read the article

• Bash: command not found

  - by Alexandre Teles

  I have a script that needs to know the processor architecture. I'm doing this way: if [["$(uname -m)" = "x86_64"]]; then wget https://dl.google.com/linux/direct/google-chrome-stable_current_x86_64.rpm else echo "Nossa! Você só pode usar 3,5GB de memória RAM. Que triste :( Vou baixar a versão 32bits pra você tá?" wget https://dl.google.com/linux/direct/google-chrome-stable_current_i386.rpm fi But when I execute the code, I receive: instala_chrome.sh: line 35: [[x86_64: command not found Anyone can help me to solve this? Thanks!

  Read the article

• Create bootable USB install image from command line?

  - by j-g-faustus

  I'm trying to create a bootable USB image to install Ubuntu on a new computer. I have done this before following the "create USB drive" instructions for Ubuntu desktop, but I don't have an Ubuntu desktop available. How can I do the same using only the command line? Things I've tried: Create bootable USB on Mac OS X following the ubuntu.com "create USB drive" instructions for Mac: Doesn't boot. usb-creator: According to apt-cache search usb-creator and Wikipedia usb-creator only exists as a graphical tool. "Create manually" instructions at help.ubuntu.com: None of the files and directories described (e.g. casper, filesystem.manifest, menu.lst) exist in the ISO image, and I don't know what has replaced them. (At my disposal is Mac OS X and Ubuntu server; I have neither Ubuntu desktop nor Windows.)

  Read the article

• Command line method to find disk usage of camera mounted using gvfs

  - by Hamish Downer

  When my camera was mounted on /media I could use the standard tools (df) to see the disk usage of the card in my camera. However now the camera is mounted using gvfs, and df seems to ignore it. I've also tried pydf and discus to no avail. The camera is definitely available through nautilus, and when I select the camera in nautlius, the status bar tells me the amount of disk free. I can also open the ~/.gvfs/ folder in nautilus and right click on the camera folder and get the disk usage in a graphical way. But that is no use for a script. Are there command line tools that are the equivalent of df for gvfs filesystems? Or even better, a way to make df report on gvfs filesystems?

  Read the article

• grub recover command line

  - by Rakesh Mohan Hallen

  Recently the service provider link suddenly broke,while I was updating. Then suddenly while I was trying to boot, i could not. The message on my screen was grub recover missing, and I had no option but the grub recover command line. I really did not know what to do. So I installed an earlier version of ubuntu 10.04. It started to boot normally. Now my system is back to 12.04 the version i was working with. How does one handle problems like this?

  Read the article

• C code - ls system command not showing bash colors

  - by m0atz

  I've just been fooling around with some code in C, an example of a really basic program is as follows which just, obviously, lists the directories using the ls system command. #include <stdio.h> int main (void) { system("ls -l -d */"); printf("I've just listed the directories :-)\n"); return 0; } This runs fine, but it shows the ls output in monochrome, whereas Bash would output the list using colors for the directories (or files if I included files). How can I make my C code use the bash colors? Thanks

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >