Search Results

Search found 8103 results on 325 pages for 'matt trouble esse'.

Page 9/325 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • Trouble burning CDs and DVDs in Windows

    - by Cory
    I've run into some errors writing CDs and DVDs recently: Trying to burn a dual layer disc using ImgBurn I come across this error when trying to finalize the disc. Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead In Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead In Anyone have an idea what could be the problem? There is no problem until it comes time to finalize the disc

    Read the article

  • Windows 7 has trouble installing software with Visual C++ 2005 & 2008

    - by John Fitzgerald
    I have been reinstalling windows 7 over and over again on an ASUS P5lD2 2Gb Ram 3Ghz P4 because it ultimately looses the contents of "Turn Windows Features On or Off" after I install software like Autocad 2010 & Microsoft Office 2007. I get install errors like 1935 and 1704 on the way tried different fixes at different times (install software in different order to try and isolate problem too). Ultimately I force the software to install after much buggering and end up loosing the contents of "TWFOOO" Should I be installing some older items like .net framework 1.1, 2.0 and visual studio items like vcredist_x86.exe? getting a bit lost because of compounded problems...

    Read the article

  • Having trouble mapping Sharepoint document library as a Network Place

    - by Sdmfj
    I am using Office 365, Sharepoint Online 2013. Using Internet Explorer these are the steps I have taken: ticked the keep me signed in on the portal.microsoftonline.com page. It redirects me to Godaddy login page because Office 365 was purchased through them. I have added these sites to trusted sites (as well as every page in the process) and chose auto logon in Internet explorer. Once on the document library I open as explorer and copy the address as text. I go to My Computer and right click to add a network place and paste in the document library address. It successfully adds the library as a network place 30% of the time. I can do this same process 3 times in a row and it will fail the first 2 times and then succeeds. It works for a little while and then I get an error that the DNS cannot be found. I need multiple users in our organization to be able to access this document library as if it was a mapped network drive on our local network. Is there an easier way to do this? I may just sync using the One Drive app but thought that direct access to the files without worrying about users keeping their files synced.

    Read the article

  • Dropped Dell XPS has hard-drive trouble

    - by Alex B.
    Yesterday, my mom dropped her laptop to the floor and got the blue screen of death after trying to boot the system. I was able to start a Fedora live CD and get some of her stuff off the hard drive, but I cannot seem to be able to install Windows on it. The installation starts loading files and then the computer turns off. I am thinking that she might need a new hard drive. Any ideas? Edit: I actually was able to boot the Windows XP installation but it is saying that no hard disk is detected. How can this be possible if I was able to mount the drive on fedora yesterday?

    Read the article

  • trouble shooting ntfs-loop-xen combination in wubi based grub of Ubuntu

    - by Registered User
    Here is a situation I installed Ubuntu on a laptop using Wubi in Windows 7 drive.*The laptop is not mine.*I have installed and things worked by now perfectly without any problem.We are trying to set up a Xen (virtualization)environment in this laptop. After setting up every thing cleanly.When I needed to boot with following grub entries menuentry "Xen Linux 2.6.32.27" { insmod ntfs set root='(hd0,2)' loopback loop0 /ubuntu/disks/root.disk set root=(loop0) multiboot /boot/xen.gz module /boot/vmlinuz-2.6.32.27 dummy=dummy root=/dev/sda2 loop=/ubuntu/disks/root.disk ro console=tty0 module /boot/initrd.img-2.6.32.27 } I got error file not found error unknown command 'multiboot' error unknown command 'module' error unknown command 'module' Now to dig this issue further I reboot the machine and go to grub command prompt and manually pass on each of the above parameters which you see in the grub entry when I reached grub> insmod multiboot then I got following message on screen error:file not found. It looks like this wubi+ grub setup has just enough modules to use loopback file on ntfs, but the ACTUAL /boot directory is on the loopback NOT ntfs (hd0,2). Therefore any attempt to read any files from (hd0,2) simply wont work, cause there's no file there.I need to use insmod multiboot and command multiboot and module which are available in grub on a normal install without Wubi.But since the laptop is not mine so I am not allowed to partition it and have to make it work in this situation only. While a normal Kernel is still booting? How can I get module multiboot in this Wubi based install.

    Read the article

  • Having Trouble Ripping Some CD's

    - by James
    Hi, When I buy CD's I tend to rip them to FLAC right away. When ripping I use Foobar2000 or Exact Audio Copy and enable secure ripping which uses error correction. Recently I bought a 2 CD compilation album brand new but when I tried to rip the second CD on my laptop using Foobar2000 it struggled with the last 2 tracks and was unable to finish. EAC was also unable to get an accurate rip and reports read errors. Ripping in fast mode results in audible errors in the output track. I have tried another computer and having similar problems. I cannot see any damage to the disc and it has not been dropped or anything. The weird thing is that I had similar problems with a different album and different PC a while back. This other CD was a compilation disk so it was also right up to the CD capacity limit and again it was the last few tracks that would not rip. Dozens of other discs have ripped fine So I am wondering if the CD is simply defective, or whether it is something else. How common are defective CD's? Do some CD drives struggle with CD's of this capacity? Or Is this some kind of copy protection? I'm thinking of asking Amazon for a replacement but it would be annoying if I get the same problem again.

    Read the article

  • Having trouble with EPSON Stylus SX130 scanner

    - by pinouchon
    I am trying to scan files with an EPSON Stylus SX130 on windows 7 x64. When i plug in the printer, windows automatically find drivers for printing, but not for scanning. So i go to the manufacturer website to download the drivers, select windows 7 64-bit and download drivers for EPSON Scan. The install works fine, but when i try to scan a file (eg: from paint or Windows fax and scan), the folowing message pops up and freezes the application : the progress bar plays the animation forever and the application does not respond. I then have no choice to kill the application with the task manager. Do you have an idea of what's going on ? How can i fix the problem, ie: how do i get the scanner actually scan files without freezing ? I tried to install the driver from the CD given in the printer package, and got the same problem. The only help i found so far (the error seems somewhat related) is this : Install a xp virtual machine and run it in there

    Read the article

  • Trouble with NFS file sharing on Synology 211 NAS and Ubuntu Client

    - by Aglystas
    I'm attempting to set up NFS file sharing and keep getting the error mount.nfs: access denied by server while mounting 192.168.1.110:/myshared Here is the exact command I'm using to mount: sudo mount -o nolock 192.168.1.110:/myshared /home/emiller/MyShared I have set 'Enabled NFS' in DSM and set NFS priviledges in the the Shares section of the control panel. Here is the /etc/exports entry from the NAS: volume1/myshared 192.168.1.*(rw,sync,no_wdelay,no_root_squash,insecure_locks,anonuid=0,anongid=0) I read some things about the hosts.allow and hosts.deny but it seems like if they are empty they aren't used for anything. I can see the share when I run ... showmount -e 192.168.1.110 Any help would be appreciated in this matter.

    Read the article

  • Trouble typing accented letters at the terminal prompt after launching Python

    - by Nicojo
    Edit: Using Mac OSX 10.6, whether I use Terminal.app or iTerm.app, when I launch Python, I can no longer type accented letters (e.g.é or ä). Any ideas? ORIGINAL POST: I am using iTerm 0.10. I would like to type in a string with accented characters (e.g. é) but when I do so at the iTerm prompt, no character appears. This does not occur in Terminal. Could someone help me find out what the problem is, and eventually fix it? EDIT: In Terminal.app, I can use accented characters. However, when I launch the Python 2.71 prompt, I can no longer type in accented characters. When I quit python and return to the terminal prompt, I can again type accented characters. In iTerm, although I quit Python and restarted iTerm, I cannot type in accented characters (I do not know if I could before).

    Read the article

  • Trouble Connecting to Virtual Machine after IP address Change

    - by David
    I have a VMware image running a copy of Fedora 11 which is hosted on a remote server. The remote server recently had its IP address change. I'm now unable to connect to my virtual machine. The server admin assures me that my virtual machine is running and assigned the new IP address. I have checked the firewalls and had the remote admin restart the VM instance. Neither of these fixed the problem. How do I troubleshoot a remote server which I am unable to SSH to? I'm actually even unable to ping the remote IP (connection timed out).

    Read the article

  • Trouble logging into SQL Server

    - by Timmy
    Getting error: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Restarted the service, server, and all the computers in between. I suspect it's not connecting to the domain server - any way to check about this?

    Read the article

  • Trouble configuring sendmail to relay mail

    - by Warren Schubert
    I am trying to configure sendmail and ufw on an ubuntu server (ServerA) so that another server (ServerB) can send mail through it. In my /etc/mail/access file I have the following line (a.b.c.d is the IP of ServerB): Connect:a.b.c.d RELAY My ufw status shows the following rule I added: 25/tcp ALLOW a.b.c.d When I telnet from ServerA I get through: telnet localhost 25 When I telnet from ServerB I don't (w.x.y.z is the IP of ServerA): telnet w.x.y.z 25 telnet: Unable to connect to remote host: Connection refused I did restart the sendmail daemon after editing the access file. What could I be missing? Something in sendmail.mc? Edit: netstat -an|grep -w 25 tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN

    Read the article

  • Trouble in Nginx hotlink protection

    - by Ayaz Malik
    I am trying to implement image hotlink protection problem in nginx and I need help. I have a huge issue of my site's images being submitted to social networks like StumbleUpon with a direct link like http://example.com/xxxxx.jpg Which sometimes gets huge traffic and increases CPU usage and bandwidth usage. I want to block direct access to my images from other referrers and protect them from being hotlinked. Here is the code from my vhost.conf server { access_log off; error_log logs/vhost-error_log warn; listen 80; server_name mydomain.com www.mydomain.com; # uncomment location below to make nginx serve static files instead of Apache # NOTE this will cause issues with bandwidth accounting as files wont be logged location ~* \.(gif|jpg|jpeg|png|wmv|avi|mpg|mpeg|mp4|htm|html|js|css)$ { root /home/username/public_html; expires 1d; } root /home/mydomain/public_html; } location / { client_max_body_size 10m; client_body_buffer_size 128k; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; # you can increase proxy_buffers here to suppress "an upstream response # is buffered to a temporary file" warning proxy_buffers 16 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; proxy_connect_timeout 30s; proxy_redirect http://www.mydomain.com:81 http://www.mydomain.com; proxy_redirect http://mydomain.com:81 http://mydomain.com; proxy_pass http://ip_address/; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; expires 24h; } } For hotlink protection I added this code location ~* (\.jpg|\.png|\.gif|\.jpeg)$ { valid_referers blocked www.mydomain.com mydomain.com; if ($invalid_referer) { return 403; } This is the current nginx code for this domain, but it didn't work: server { access_log off; error_log logs/vhost-error_log warn; listen 80; server_name mydomain.com www.mydomain.com; # uncomment location below to make nginx serve static files instead of Apache # NOTE this will cause issues with bandwidth accounting as files wont be logged location ~* \.(gif|jpg|jpeg|png|wmv|avi|mpg|mpeg|mp4|htm|html|js|css)$ { root /home/username/public_html; expires 1d; } root /home/mydomain/public_html; } location ~* (\.jpg|\.png|\.gif|\.jpeg)$ { valid_referers blocked www.mydomain.com mydomain.com; if ($invalid_referer) { return 403; } location / { client_max_body_size 10m; client_body_buffer_size 128k; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; # you can increase proxy_buffers here to suppress "an upstream response # is buffered to a temporary file" warning proxy_buffers 16 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; proxy_connect_timeout 30s; proxy_redirect http://www.mydomain.com:81 http://www.mydomain.com; proxy_redirect http://mydomain.com:81 http://mydomain.com; proxy_pass http://ip_address/; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; expires 24h; } } How can I fix this?

    Read the article

  • Windows 7 PC browsers having trouble to open certain sites but not others

    - by user55345
    Hi, My Win7 PC these days acting very weird: Examples: It can not open bing.com, alexa.com, msdn.microsoft.com (blank page or page can not be found); It can open zdnet.com but lost all CSS layouts and pictures; It can open stackoverflow and Google no problem; I tried all three browsers (IE8, Chrome, Firefox 3.6) same thing. I didn't change anything on this PC in days. This PC does have Anti-Virus installed and updated. I'm also pretty sure it's not a network problem, because my other laptops are just fine at the same time. The only thing I can think of is it might be some auto-update stuff underneath happened without my knowledge, but I have no idea where to troubleshoot? Please shed some lights for me? Thanks a lot.

    Read the article

  • Windows 7 has trouble installing software with Visual C++ 2005 & 2008

    - by John Fitzgerald
    I have been reinstalling Windows 7 over and over again on an ASUS P5lD2 2Gb Ram 3Ghz P4 because it ultimately loses the contents of "Turn Windows Features On or Off" after I install software like Autocad 2010 & Microsoft Office 2007. I get install errors like 1935 and 1704 on the way tried different fixes at different times (install software in different order to try and isolate problem too). Ultimately I force the software to install after much buggering and end up losing the contents of "TWFOOO" Should I be installing some older items like .net framework 1.1, 2.0 and Visual Studio items like vcredist_x86.exe? getting a bit lost because of compounded problems...

    Read the article

  • Trouble Connecting to Virtual Machine after IP address Change

    - by David
    I have a VMware image running a copy of Fedora 11 which is hosted on a remote server. The remote server recently had its IP address change. I'm now unable to connect to my virtual machine. The server admin assures me that my virtual machine is running and assigned the new IP address. I have checked the firewalls and had the remote admin restart the VM instance. Neither of these fixed the problem. How do I troubleshoot a remote server which I am unable to SSH to? I'm actually even unable to ping the remote IP (connection timed out).

    Read the article

  • nagios: trouble using check_smtps command

    - by ethrbunny
    I'm trying to use this command to check on port 587 for my postfix server. Using nmap -P0 mail.server.com I see this: Starting Nmap 5.51 ( http://nmap.org ) at 2013-11-04 05:01 PST Nmap scan report for mail.server.com (xx.xx.xx.xx) Host is up (0.0016s latency). rDNS record for xx.xx.xx.xx: another.server.com Not shown: 990 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 110/tcp open pop3 111/tcp open rpcbind 143/tcp open imap 465/tcp open smtps 587/tcp open submission 993/tcp open imaps 995/tcp open pop3s 5666/tcp open nrpe So I know the relevant ports for smtps (465 or 587) are open. When I use openssl s_client -connect mail.server.com:587 -starttls smtp I get a connection with all the various SSL info. (Same for port 465). But when I try libexec/check_ssmtp -H mail.server.com -p587 I get: CRITICAL - Cannot make SSL connection. 140200102082408:error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol:s23_clnt.c:699: What am I doing wrong?

    Read the article

  • Trouble printing to local printer when connected to VPN with split-tunneling enabled

    - by Marve
    I'm a volunteer network admin for a multi-tenant non-profit office space. One of our new tenants uses a VPN to connect to remote resources using RRAS and Small Business Server 2008. They also have a local network printer for the workstations in our office. When connected to the VPN, they cannot print to the local printer. I informed their network admin that they need to enable split-tunneling to fix this. Their network admin enabled split-tunneling, but apparently printing still didn't work. He told me that I need to open port 1723 on our office firewall to allow it to work. I'm just a novice administrator and not familiar with RRAS, but this doesn't sound right to me and I haven't been able to find anything on the web to validate it. Additionally, my understanding of split-tunneling is that it is handled entirely by the VPN client and should work irrespective of firewall settings. Is my understanding of the situation incorrect? What steps should I take to resolve this problem?

    Read the article

  • Trouble with nginx and serving from multiple directories under the same domain

    - by Phase
    I have nginx setup to serve from /usr/share/nginx/html, and it does this fine. I also want to add it to serve from /home/user/public_html/map on the same domain. So: my.domain.com would get you the files in /usr/share/nginx/html my.domain.com/map would get you the files in /home/user/public_html/map With the below configuration (/etc/nginx/nginx.conf) it appears to be going to my.domain.com/map/map as noticed by this: 2011/03/12 09:50:26 [error] 2626#0: *254 "/home/user/public_html/map/map/index.html" is forbidden (13: Permission denied), client: <edited ip address>, server: _, request: "GET /map/ HTTP/1.1", host: "<edited>" I've tried a few things but I'm still not able to get it to cooperate, so any help would be greatly appreciated. ####################################################################### # # This is the main Nginx configuration file. # ####################################################################### #---------------------------------------------------------------------- # Main Module - directives that cover basic functionality #---------------------------------------------------------------------- user nginx; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; #---------------------------------------------------------------------- # Events Module #---------------------------------------------------------------------- events { worker_connections 1024; } #---------------------------------------------------------------------- # HTTP Core Module #---------------------------------------------------------------------- http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; keepalive_timeout 65; server { listen 80; server_name _; #access_log logs/host.access.log main; location / { root /usr/share/nginx/html; index index.html index.htm; } location /map { root /home/user/public_html/map; index index.html index.htm; } error_page 404 /404.html; location = /404.html { root /usr/share/nginx/html; } error_page 500 502 503 504 /50x.html; location = /50x.html { root /usr/share/nginx/html; } } include /etc/nginx/conf.d/*.conf; }

    Read the article

  • Trouble with resolving hostnames on CentOS using Bind

    - by cabaret
    I'm taking a course on server administration at school and I have managed to set up virtual hosting in apache and a dns server on a virtual machine. However, I have now set up an old pc to run CentOS and I'm trying the same on that box. The problem I ran into now is that I can't resolve hostnames from the linux box. I have set up the nameserver in /etc/resolv.conf to the IP of the CentOS machine, but when I try for example ping google.com I get ping: unknown host google.com However, when I do ping 66.102.13.105 (which is the Google IP, figured that out by pinging on my mac) I get: PING 66.102.13.105 (66.102.13.105) 56(84) bytes of data. 64 bytes from 66.102.13.105: icmp_seq=1 ttl=52 time=15.5 ms Slightly confused why this is happening. Could it be because of my router sitting in between the linux machine and the cable modem? It's a D-Link somethingsomething. Thanks in advance

    Read the article

  • Having trouble keeping a 1GB RAM Centos server running

    - by Josh
    This is my first time configuring a VPS server and I'm having a few issues. We're running Wordpress on a 1GB Centos server configured per the internet (online research). No custom queries or anything crazy but closing in on 8K posts. At arbitrary intervals, the server just goes down. From the client side, it just says "Loading..." and will spin more or less indefinitely. On the server side, the shell will lock completely. We have to do a hard reboot from the control panel and then everything is fine. Watching "top" I see it hovering between 35 - 55% memory usage generally and occasional spikes up to around 80%. When I saw it go down, there were about 30 - 40 Apache processes showing which pushed memory over the edge. "error_log" tells me that maxclients was reached right before each reboot instance. I've tried tinkering with that but to no avail. I think we'll probably need to bump the server up to the next RAM level but with ~120K pageviews per month, it seems like that's a bit overkill since it was running fairly well on a shared server before. Any ideas? httpd.conf and my.cnf values to add? I'll update this with the current ones if that helps. Thanks in advance! This has been a fun and important learning experience but, overall, quite frustrating! Edit: quick top snapshot: top - 15:18:15 up 2 days, 13:04, 1 user, load average: 0.56, 0.44, 0.38 Tasks: 85 total, 2 running, 83 sleeping, 0 stopped, 0 zombie Cpu(s): 6.7%us, 3.5%sy, 0.0%ni, 89.6%id, 0.0%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 2051088k total, 736708k used, 1314380k free, 199576k buffers Swap: 4194300k total, 0k used, 4194300k free, 287688k cached

    Read the article

  • SCSI driver installation trouble

    - by Vicky
    I tried to install the driver of Adaptec 39320A-Ultra 320 SCSI card in Win2003 Server R2 SP2 in a DELL PowerEdge 2950 Server. I selected the driver from the list of drivers present in windows. But it says that the device could not be started(Code 10). I tried to put the card in a system that already had the driver installed. It worked fine. So there is no problem with the hardware. I even tried downloading the driver from the manufacturer website. When I try to select install from path and install that driver, it tell no matching driver found. When I install the default driver from windows, it shows the card in SCSI group of device manager, but with an ! symbol. Also the device ID in driver details was different from that of the one present in other system where it insalled fine. Any suggessions to solve it?

    Read the article

  • Trouble restoring an iPod touch backup

    - by stringo0
    I ran into some problems with my iPod, and am trying to restore a backup following this link - http://support.apple.com/kb/HT1414 I tried following the section under "Restoring your iPhone or iPod touch". When it gets to step 9, it simply doesn't show up - the restore happens, the iPod restarts, but I DO NOT get an option to set it up as a new device, or restore a backup. A backup does exist (checked the location). Any ideas on how I can restore the backup?

    Read the article

  • Trouble in Team Viewer VPN Connection

    - by Sumit Pal
    I have completed initial vpn connection setup. It has connected. I have tested with ping and it is ok. My problem is, when I want to start file transfer in VPN it asks for username & password. So what is the user name? I have tried giving Computer-Name/User-Name. I have found my Computer Name by going to Control Panel/System/ & clicking 'Computer Name' tab & username from user accounts or it is shown when I login in windows account (Please correct me if the above procedure is wrong). But what is the password? I have tried giving the account password but it always give 'The username or password is incorrect.' My Question: How to find the username & password? For Information: a) I have Team Viewer 7 installed in one Windows XP PC & one Windows 8 PC. I like to create a secure connection between these two PCs. b) The two PCs are connected in the same local network via a router. Please ask if you need additional information.

    Read the article

  • Active Directory: trouble adding new DC

    - by ethrbunny
    I have a domain with 3 DCs. One is starting to fail so I brought up a new one. All are running Win 2003. Problem: there appear to be replication issues between the 4 machines but I can't figure out what's causing this. All are registered with the DNS as identically as I can make them. How do I know there is a problem? Nagios is telling me that the other 3 DCs are having KCCEvent errors and the new machine is reporting "failed connectivity" errors. Doing dcdiag on the new machine reports: the host could not be resolved to an IP address. This seems crazy as I log into it using the DNS name. I can ping it from the other three machines using this DNS name as well. repadmin /showreps from the new machine says its seeing the other 3 machines. Doing the same from one of the older machines doesn't show the new machine. I've tried netdiag /repair numerous times. No luck. There are no firewalls running on any of the machines. If I look at Domain info via MMC (on the new machine) it appears that all the information is current. Users, computers, DCs.. its all there. Im puzzled as to what step(s) I've missed in adding this new machine. Suggestions? EDIT: dcdiag from non-working: C:\Documents and Settings\Administrator.BME>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\YELLOW Starting test: Connectivity The host 312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc Although the Guid DNS name (312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu) couldn't be resolved, the server name (yellow.server.edu) resolved to the IP address (10.127.24.79) and was pingable. Check that the IP address is registered correctly with the DNS server. ......................... YELLOW failed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\YELLOW Skipping all tests, because server YELLOW is not responding to directory service requests Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck dcdiag from working: P:\>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\AD1 Starting test: Connectivity ......................... AD1 passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\AD1 Starting test: Replications ......................... AD1 passed test Replications Starting test: NCSecDesc ......................... AD1 passed test NCSecDesc Starting test: NetLogons ......................... AD1 passed test NetLogons Starting test: Advertising ......................... AD1 passed test Advertising Starting test: KnowsOfRoleHolders ......................... AD1 passed test KnowsOfRoleHolders Starting test: RidManager ......................... AD1 passed test RidManager Starting test: MachineAccount ......................... AD1 passed test MachineAccount Starting test: Services ......................... AD1 passed test Services Starting test: ObjectsReplicated ......................... AD1 passed test ObjectsReplicated Starting test: frssysvol ......................... AD1 passed test frssysvol Starting test: frsevent ......................... AD1 passed test frsevent Starting test: kccevent ......................... AD1 passed test kccevent Starting test: systemlog ......................... AD1 passed test systemlog Starting test: VerifyReferences ......................... AD1 passed test VerifyReferences Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck P:\>

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >