Search Results

Search found 27410 results on 1097 pages for 'output device'.

Page 9/1097 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • raid md device is not remove from memory, how to overcome this problem

    - by santhosha
    i create raid 10 , i removed two arrays form md11 one by one , after that i going to editing the contents those are mounted ( it will be not responding stage), after i try for remove arrays those are left it is shows device or resource busy ( is not removed from memory). i try to terminate process this is also not work, i absorve from 4 days resync will be 8.0% it can not modifying. cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec mdadm -D /dev/md11 /dev/md11: Version : 00.90.03 Creation Time : Sun Jan 16 16:20:01 2011 Raid Level : raid10 Array Size : 286743936 (273.46 GiB 293.63 GB) Device Size : 143371968 (136.73 GiB 146.81 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 11 Persistence : Superblock is persistent Update Time : Sun Jan 16 16:56:07 2011 State : active, degraded, resyncing Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K Rebuild Status : 8% complete UUID : 5e124ea4:79a01181:dc4110d3:a48576ea Events : 0.23 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 4 8 145 2 faulty spare rebuilding /dev/sdj1 3 8 65 3 active sync /dev/sde1 umount /dev/md11 umount: /dev/md11: not mounted mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 kill -9 2128 kill -9 5018 kill -9 27605 kill -9 30562 kill -3 30591 mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec

    Read the article

  • USB Hub and Ubuntu

    - by aserwin
    I have a powered 7 port hub connected to my Ubuntu box and it does nothing. The devices (zip drive and web cam) work direct, but aren't recognized through the hub. This worked fine in Windows 7. I can't prove it is the OS because this is a new motherboard and processor. Any advice? EDIT : Output from lsusb -v Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:12.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0503 highspeed power enable connect Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:13.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:16.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0001 Self Powered Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:12.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:13.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:14.5 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0001 Self Powered Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:16.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0303 lowspeed power enable connect Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0001 Self Powered Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:02:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0001 Self Powered Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:02:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 31 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 bMaxBurst 0 Hub Descriptor: bLength 12 bDescriptorType 42 nNbrPorts 2 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere bHubDecLat 0.0 micro seconds wHubDelay 0 nano seconds DeviceRemovable 0x00 Hub Port Status: Port 1: 0000.02a0 5Gbps power Rx.Detect Port 2: 0000.02a0 5Gbps power Rx.Detect Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 15 bNumDeviceCaps 1 SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 Latency Tolerance Messages (LTM) Supported wSpeedsSupported 0x0008 Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 3 Lowest fully-functional device speed is SuperSpeed (5Gbps) bU1DevExitLat 3 micro seconds bU2DevExitLat 2047 micro seconds Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 04a9:1709 Canon, Inc. PIXMA MP150 Scanner Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x04a9 Canon, Inc. idProduct 0x1709 PIXMA MP150 Scanner bcdDevice 1.08 iManufacturer 1 Canon iProduct 2 MP150 iSerial 3 20BC24 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 62 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x07 EP 7 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 11 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 007 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x046d Logitech, Inc. idProduct 0xc517 LX710 Cordless Desktop Laser bcdDevice 38.10 iManufacturer 1 Logitech iProduct 2 USB Receiver iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 98mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 59 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 177 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) This is with the powered hub plugged in.

    Read the article

  • USB device not accepting address

    - by Mike Williamson
    I have a series of machines that I am building for work that have usb card readers. When I boot them I get a long series of messages: ... [ 2347.768419] hub 1-6:1.0: unable to enumerate USB device on port 6 [ 2347.968178] usb 1-6.6: new full-speed USB device number 10 using ehci_hcd [ 2352.552020] usb 1-6.6: device not accepting address 10, error -32 [ 2352.568421] hub 1-6:1.0: unable to enumerate USB device on port 6 [ 2352.768179] usb 1-6.6: new full-speed USB device number 12 using ehci_hcd [ 2357.352033] usb 1-6.6: device not accepting address 12, error -32 ... On some older machines this only takes a few attempts before the card reader finally accepts an address, while on newer machines it can take many minutes. Changing hardware is not an option and plugging the usb card reader into a different port is only an option for the older manchines. This was a problem under 11.04 and I am now running the 12.04 beta and its still happening. Is there something I can do in the software (a udev rule perhaps?) that would fix this? Any advice appreciated. I'm happy to provide more details if you need them.

    Read the article

  • To capture Tv tuner output

    - by mawia
    Hi! all, We are developting a tool for live video streaming in which we want to broadcast the output of tv tuner on a network.Our project is at it's nascent stage.Our main concern at this moment is to how to capture the output of a tv tuner card.Plz guide us regarding this or provide a pointer where I can detail about the topic. All help will be highly appreciated. Thanks Mawia

    Read the article

  • E160 ubuntu 12.04 can't detect the modem

    - by Matt
    i've got problem with e160 on ubuntu 12.04. I'cant configure network manager and connect because NM can't see the e160. I;ve tried lot of solutions with no result. ateusz@mateusz-Aspire-5738:~$ sudo usb_modeswitch -v 0x12d1 -p 0x1003 -H [sudo] password for mateusz: aLooking for default devices ... found matching product ID adding device Found device in default mode, class or configuration (1) Accessing device 002 on bus 001 ... Getting the current device configuration ... OK, got current device configuration (1) Using first interface: 0x00 Using endpoints 0x01 (out) and 0x82 (in) Not a storage device, skipping SCSI inquiry USB description data (for identification) ------------------------- Manufacturer: HUAWEI Technology Product: HUAWEI Mobile Serial No.: not provided ------------------------- Sending Huawei control message ... OK, Huawei control message sent - Run lsusb to note any changes. Bye. Dmesg [ 521.480062] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 521.617792] option 1-4:1.1: GSM modem (1-port) converter detected [ 521.617945] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 521.618062] option 1-4:1.0: GSM modem (1-port) converter detected [ 521.618232] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 530.840276] option: option_instat_callback: error -108 [ 530.840455] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 530.840484] option 1-4:1.0: device disconnected [ 537.680378] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 537.680398] option 1-4:1.1: device disconnected [ 537.792088] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 537.929549] option 1-4:1.1: GSM modem (1-port) converter detected [ 537.929702] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 537.929818] option 1-4:1.0: GSM modem (1-port) converter detected [ 537.929993] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 547.224294] option: option_instat_callback: error -108 [ 547.224470] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 547.224511] option 1-4:1.0: device disconnected [ 556.988066] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 558.990663] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 558.990698] option 1-4:1.1: device disconnected [ 559.100068] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 559.241293] option 1-4:1.1: GSM modem (1-port) converter detected [ 559.241446] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 559.241565] option 1-4:1.0: GSM modem (1-port) converter detected [ 559.241739] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 568.728283] option: option_instat_callback: error -108 [ 568.728466] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 568.728496] option 1-4:1.0: device disconnected lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 005 Device 002: ID 09da:c20a A4 Tech Co., Ltd Bus 001 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E230/E270/E870 HSDPA/HSUPA Modem

    Read the article

  • System.Diagnostics.Process to run processes, send parameters and get output

    - by Lily
    Hi, I am trying to call a process using System.Diagnostics.Process, send it a parameter, just for the sake of trying it out i am sending "-h" which should generate a list of help options and I need the output. So far I have tried, ProcessStartInfo startInfo = new ProcessStartInfo("C:\\agfl\\agfl.exe"); startInfo.WindowStyle = ProcessWindowStyle.Normal; startInfo.CreateNoWindow = false; startInfo.Arguments = "-h"; Process.Start(startInfo); Any help please? Thanks :)

    Read the article

  • DELETE from two tables with one OUTPUT clause?

    - by lance
    This deletes the document from the Document table and outputs information about the deleted document into the FinishedDocument table. DELETE FROM Document OUTPUT Deleted.DocumentId , Deleted.DocumentDescription INTO FinishedDocument WHERE DocumentId = @DocumentId I need to delete the document not just from the Document table, but also from the DocumentBackup table. Meanwhile, I need to maintain insertion into FinishedDocument. Is all of this possible with only one statement? If not, is a second DELETE (against DocumentBackup), with all of it wrapped in a transaction, the way to go?

    Read the article

  • Bash: How to flush output to a file while running

    - by noam
    I have a small script, which is called daily by crontab using the following command: /homedir/MyScript &> some_log.log The problem with this method is that some_log.log is only created after MyScript finishes. I would like to flush the output of the program into the file while it's running so I could do things like tail -f some_log.log and keep track of the progress, etc.

    Read the article

  • Cache Simulator in C

    - by DuffDuff
    Ok this is only my second question, and it's quite a doozy. It's for a school assignment, but no one (including the TAs) seems to be able to help me. It's kind of a tall order but I'm not sure where else to turn. Essentially the assignment was to make a cache simulator. This version is direct mapping and is actually only a small portion of the whole project, but if I can't even get this down I have no chance with other associativities. I'm posting my whole code because I don't want to make any assumptions about where the problem is. This is the test case: http://www.mediafire.com/?ty5dnihydnw And you run the following command: ./sims 512 direct 32 fifo wt pinatrace.out You're supposed to get: hits: 604037 misses 138349 writes: 239269 reads: 138349 But I get: Hits: 587148 Misses: 155222 Writes: 239261 Reads: 155222 If anyone could at least point me in the right direction it would be greatly appreciated. I've been stuck on this for about 12 hours. #include <stdio.h> #include <stdlib.h> #include <string.h> #include <math.h> struct myCache { int valid; char *tag; char *block; }; /* sim [-h] <cache size> <associativity> <block size> <replace alg> <write policy> <trace file> */ //God willing I come up with a better Hex to Bin convertion that maintains the beginning 0s... void hex2bin(char input[], char output[]) { int i; int a = 0; int b = 1; int c = 2; int d = 3; int x = 4; int size; size = strlen(input); for (i = 0; i < size; i++) { if (input[i] =='0') { output[i*x +a] = '0'; output[i*x +b] = '0'; output[i*x +c] = '0'; output[i*x +d] = '0'; } else if (input[i] =='1') { output[i*x +a] = '0'; output[i*x +b] = '0'; output[i*x +c] = '0'; output[i*x +d] = '1'; } else if (input[i] =='2') { output[i*x +a] = '0'; output[i*x +b] = '0'; output[i*x +c] = '1'; output[i*x +d] = '0'; } else if (input[i] =='3') { output[i*x +a] = '0'; output[i*x +b] = '0'; output[i*x +c] = '1'; output[i*x +d] = '1'; } else if (input[i] =='x') { output[i*x +a] = '0'; output[i*x +b] = '1'; output[i*x +c] = '0'; output[i*x +d] = '0'; } else if (input[i] =='5') { output[i*x +a] = '0'; output[i*x +b] = '1'; output[i*x +c] = '0'; output[i*x +d] = '1'; } else if (input[i] =='6') { output[i*x +a] = '0'; output[i*x +b] = '1'; output[i*x +c] = '1'; output[i*x +d] = '0'; } else if (input[i] =='7') { output[i*x +a] = '0'; output[i*x +b] = '1'; output[i*x +c] = '1'; output[i*x +d] = '1'; } else if (input[i] =='8') { output[i*x +a] = '1'; output[i*x +b] = '0'; output[i*x +c] = '0'; output[i*x +d] = '0'; } else if (input[i] =='9') { output[i*x +a] = '1'; output[i*x +b] = '0'; output[i*x +c] = '0'; output[i*x +d] = '1'; } else if (input[i] =='a') { output[i*x +a] = '1'; output[i*x +b] = '0'; output[i*x +c] = '1'; output[i*x +d] = '0'; } else if (input[i] =='b') { output[i*x +a] = '1'; output[i*x +b] = '0'; output[i*x +c] = '1'; output[i*x +d] = '1'; } else if (input[i] =='c') { output[i*x +a] = '1'; output[i*x +b] = '1'; output[i*x +c] = '0'; output[i*x +d] = '0'; } else if (input[i] =='d') { output[i*x +a] = '1'; output[i*x +b] = '1'; output[i*x +c] = '0'; output[i*x +d] = '1'; } else if (input[i] =='e') { output[i*x +a] = '1'; output[i*x +b] = '1'; output[i*x +c] = '1'; output[i*x +d] = '0'; } else if (input[i] =='f') { output[i*x +a] = '1'; output[i*x +b] = '1'; output[i*x +c] = '1'; output[i*x +d] = '1'; } } output[32] = '\0'; } int main(int argc, char* argv[]) { FILE *tracefile; char readwrite; int trash; int cachesize; int blocksize; int setnumber; int blockbytes; int setbits; int blockbits; int tagsize; int m; int count = 0; int count2 = 0; int count3 = 0; int i; int j; int xindex; int jindex; int kindex; int lindex; int setadd; int totalset; int writeMiss = 0; int writeHit = 0; int cacheMiss = 0; int cacheHit = 0; int read = 0; int write = 0; int size; int extra; char bbits[100]; char sbits[100]; char tbits[100]; char output[100]; char input[100]; char origtag[100]; if (argc != 7) { if (strcmp(argv[0], "-h")) { printf("./sim2 <cache size> <associativity> <block size> <replace alg> <write policy> <trace file>\n"); return 0; } else { fprintf(stderr, "Error: wrong number of parameters.\n"); return -1; } } tracefile = fopen(argv[6], "r"); if(tracefile == NULL) { fprintf(stderr, "Error: File is NULL.\n"); return -1; } //Determining size of sbits, bbits, and tag cachesize = atoi(argv[1]); blocksize = atoi(argv[3]); setnumber = (cachesize/blocksize); printf("setnumber: %d\n", setnumber); setbits = (round((log(setnumber))/(log(2)))); printf("sbits: %d\n", setbits); blockbits = log(blocksize)/log(2); printf("bbits: %d\n", blockbits); tagsize = 32 - (blockbits + setbits); printf("t: %d\n", tagsize); struct myCache newCache[setnumber]; //Allocating Space for Tag Bits, initiating tag and valid to 0s for(i=0;i<setnumber;i++) { newCache[i].tag = (char *)malloc(sizeof(char)*(tagsize+1)); for(j=0;j<tagsize;j++) { newCache[i].tag[j] = '0'; } newCache[i].valid = 0; } while(fgetc(tracefile)!='#') { setadd = 0; totalset = 0; //read in file fseek(tracefile,-1,SEEK_CUR); fscanf(tracefile, "%x: %c %s\n", &trash, &readwrite, origtag); //shift input Hex size = strlen(origtag); extra = (10 - size); for(i=0; i<extra; i++) input[i] = '0'; for(i=extra, j=0; i<(size-(2-extra)); j++, i++) input[i]=origtag[j+2]; input[8] = '\0'; // Convert Hex to Binary hex2bin(input, output); //Resolving the Address into tbits, sbits, bbits for (xindex=0, jindex=(32-blockbits); jindex<32; jindex++, xindex++) { bbits[xindex] = output[jindex]; } bbits[xindex]='\0'; for (xindex=0, kindex=(32-(blockbits+setbits)); kindex<32-(blockbits); kindex++, xindex++){ sbits[xindex] = output[kindex]; } sbits[xindex]='\0'; for (xindex=0, lindex=0; lindex<(32-(blockbits+setbits)); lindex++, xindex++){ tbits[xindex] = output[lindex]; } tbits[xindex]='\0'; //Convert set bits from char array into ints for(xindex = 0, kindex = (setbits -1); xindex < setbits; xindex ++, kindex--) { if (sbits[xindex] == '1') setadd = 1; if (sbits[xindex] == '0') setadd = 0; setadd = setadd * pow(2, kindex); totalset += setadd; } //Calculating Hits and Misses if (newCache[totalset].valid == 0) { newCache[totalset].valid = 1; strcpy(newCache[totalset].tag, tbits); } else if (newCache[totalset].valid == 1) { if(strcmp(newCache[totalset].tag, tbits) == 0) { if (readwrite == 'W') { cacheHit++; write++; } if (readwrite == 'R') cacheHit++; } else { if (readwrite == 'R') { cacheMiss++; read++; } if (readwrite == 'W') { cacheMiss++; read++; write++; } strcpy(newCache[totalset].tag, tbits); } } } printf("Hits: %d\n", cacheHit); printf("Misses: %d\n", cacheMiss); printf("Writes: %d\n", write); printf("Reads: %d\n", read); }

    Read the article

  • Linux Device Driver: Symbol "memcpy" not found

    - by Hinton
    Hello, I'm trying to write a Linux device driver. I've got it to work really well, until I tried to use "memcpy". I don't even get a compiler error, when I "make" it just warns me: WARNING: "memcpy" [/root/homedir/sv/main.ko] undefined! OK and when I try to load via insmod, I get on the console: insmod: error inserting './main.ko': -1 Unknown symbol in module and on dmesg: main: Unknown symbol memcpy (err 0) I include the following: #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> #include <linux/kernel.h> /* printk() */ #include <linux/slab.h> /* kmalloc() */ #include <linux/fs.h> /* everything... */ #include <linux/errno.h> /* error codes */ #include <linux/types.h> /* size_t */ #include <linux/fcntl.h> /* O_ACCMODE */ #include <linux/cdev.h> #include <asm/system.h> /* cli(), *_flags */ #include <asm/uaccess.h> /* copy_*_user */ The function using memcpy: static int dc_copy_to_user(char __user *buf, size_t count, loff_t *f_pos, struct sv_data_dev *dev) { char data[MAX_KEYLEN]; size_t i = 0; /* Copy the bulk as long as there are 10 more bytes to copy */ while (i < (count + MAX_KEYLEN)) { memcpy(data, &dev->data[*f_pos + i], MAX_KEYLEN); ec_block(dev->key, data, MAX_KEYLEN); if (copy_to_user(&buf[i], data, MAX_KEYLEN)) { return -EFAULT; } i += MAX_KEYLEN; } return 0; } Could someone help me? I thought the thing was in linux/string.h, but I get the error just the same. I'm using kernel 2.6.37-rc1 (I'm doing in in user-mode-linux, which works only since 2.6.37-rc1). Any help is greatly appreciated. # Context dependent makefile that can be called directly and will invoke itself # through the kernel module building system. KERNELDIR=/usr/src/linux ifneq ($(KERNELRELEASE),) EXTRA_CFLAGS+=-I $(PWD) -ARCH=um obj-m := main.o else KERNELDIR ?= /lib/modules/$(shell uname -r)/build PWD = $(shell pwd) all: $(MAKE) V=1 ARCH=um -C $(KERNELDIR) M=$(PWD) modules clean: rm -rf Module.symvers .*.cmd *.ko .*.o *.o *.mod.c .tmp_versions *.order endif

    Read the article

  • stdout, stderr, and what else? (going insane parsing slapadd output)

    - by user64204
    I am using slapadd to restore a backup. That backup contains 45k entries which takes a while to restore so I need to get some progress update from slapadd. Luckily for me there is the -v switch which gives an output similar to this one: added: "[email protected],ou=People,dc=example,dc=org" (00003d53) added: "[email protected],ou=People,dc=example,dc=org" (00003d54) added: "[email protected],ou=People,dc=example,dc=org" (00003d55) .######## 44.22% eta 05m05s elapsed 04m spd 29.2 k/s added: "[email protected],ou=People,dc=example,dc=org" (00003d56) added: "[email protected],ou=People,dc=example,dc=org" (00003d57) added: "[email protected],ou=People,dc=example,dc=org" (00003d58) added: "[email protected],ou=People,dc=example,dc=org" (00003d59) Every N entries added, slapadd writes a progress update output line (.######## 44.22% eta 05m05s elapsed ...) which I want to keep and an output line for every entry created which I want to hide because it exposes people's email address but still want to count them to know how many users were imported The way I thought about hiding emails and showing the progress update is this: $ slapadd -v ... 2>&1 | tee log.txt | grep '########' # => would give me real-time progress update $ grep "added" log.txt | wc -l # => once backup has been restored I would know how many users were added I tried different variations of the above, and whatever I try I can't grep the progress update output line. I traced slapadd as follows: sudo strace slapadd -v ... And here is what I get: write(2, "added: \"[email protected]"..., 78added: "[email protected],ou=People,dc=example,dc=org" (00000009) ) = 78 gettimeofday({1322645227, 253338}, NULL) = 0 _######## 44.22% eta 05m05s elapsed 04m spd 29.2 k/s ) = 80 write(2, "\n", 1 ) As you can see, the percentage line isn't sent to either stdout or stderr (FYI I have validated with known working and failing commands that 2 is stderr and 1 is stdout) Q1: Where is the progress update output line going? Q2: How can I grep on it while sending stderr to a file? Additional info: I'm running Openldap 2.4.21 on ubuntu server 10.04

    Read the article

  • Input/output (read) errors in Bacula while setting up a Tape Drive + Autochanger

    - by Kyle Brandt
    When running the label barcode command in bacula I am getting Input/output errors. I am just getting started in trying to set this up: Connecting to Storage daemon TapeDevice at ny-back01.ny.stackoverflow.com:9103 ... Sending label command for Volume "ACJ332" Slot 1 ... 3307 Issuing autochanger "unload slot 8, drive 0" command. 3304 Issuing autochanger "load slot 1, drive 0" command. 3305 Autochanger "load slot 1, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ332" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ332", Slot 1 successfully created. Sending label command for Volume "ACJ331" Slot 2 ... 3307 Issuing autochanger "unload slot 1, drive 0" command. 3304 Issuing autochanger "load slot 2, drive 0" command. 3305 Autochanger "load slot 2, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ331" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ331", Slot 2 successfully created. Sending label command for Volume "ACJ328" Slot 3 ... 3307 Issuing autochanger "unload slot 2, drive 0" command. 3304 Issuing autochanger "load slot 3, drive 0" command. 3305 Autochanger "load slot 3, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ328" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ328", Slot 3 successfully created. Sending label command for Volume "ACJ329" Slot 4 ... 3307 Issuing autochanger "unload slot 3, drive 0" command. 3304 Issuing autochanger "load slot 4, drive 0" command. 3305 Autochanger "load slot 4, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ329" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ329", Slot 4 successfully created. Sending label command for Volume "ACJ335" Slot 5 ... 3307 Issuing autochanger "unload slot 4, drive 0" command. 3304 Issuing autochanger "load slot 5, drive 0" command. 3305 Autochanger "load slot 5, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ335" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ335", Slot 5 successfully created. Sending label command for Volume "ACJ334" Slot 6 ... 3307 Issuing autochanger "unload slot 5, drive 0" command. 3304 Issuing autochanger "load slot 6, drive 0" command. 3305 Autochanger "load slot 6, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ334" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ334", Slot 6 successfully created. Sending label command for Volume "ACJ333" Slot 7 ... 3307 Issuing autochanger "unload slot 6, drive 0" command. 3304 Issuing autochanger "load slot 7, drive 0" command. 3305 Autochanger "load slot 7, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ333" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ333", Slot 7 successfully created. Sending label command for Volume "ACJ330" Slot 8 ... 3307 Issuing autochanger "unload slot 7, drive 0" command. Bacula-dir: # Definition of file storage device Storage { Name = TapeDevice # Do not use "localhost" here Address = ny-back01.... # N.B. Use a fully qualified name here SDPort = 9103 Password = "..." Device = ULTRIUM-HH4 Media Type = LTO-4 Media Type = File Autochanger = Yes } Bacula-sd: Autochanger { Name = StorageLoader1U Device = ULTRIUM-HH4 Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" Changer Device = /dev/sg5 } Device { Name = ULTRIUM-HH4 Media Type = LTO-4 Archive Device = /dev/st0 AutomaticMount = yes; AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; AutoChanger = yes; RandomAccess = no; } Anyone knows what this means / why I am getting this?

    Read the article

  • NULL pointer dereference in swiotlb_unmap_sg_attrs() on disk IO

    - by Inductiveload
    I'm getting an error I really don't understand when reading or writing files using a PCIe block device driver. I seem to be hitting an issue in swiotlb_unmap_sg_attrs(), which appears to be doing a NULL dereference of the sg pointer, but I don't know where this is coming from, as the only scatterlist I use myself is allocated as part of the device info structure and persists as long as the driver does. There is a stacktrace to go with the problem. It tends to vary a bit in exact details, but it always crashes in swiotlb_unmap_sq_attrs(). I think it's likely I have a locking issue, as I am not sure how to handle the locks around the IO functions. The lock is already held when the request function is called, I release it before the IO functions themselves are called, as they need an (MSI) IRQ to complete. The IRQ handler updates a "status" value, which the IO function is waiting for. When the IO function returns, I then take the lock back up and return to request queue handling. The crash happens in blk_fetch_request() during the following: if (!__blk_end_request(req, res, bytes)){ printk(KERN_ERR "%s next request\n", DRIVER_NAME); req = blk_fetch_request(q); } else { printk(KERN_ERR "%s same request\n", DRIVER_NAME); } where bytes is updated by the request handler to be the total length of IO (summed length of each scatter-gather segment).

    Read the article

  • XSLT disable output escaping when disable-output-escaping is not supported

    - by Moose Morals
    Hi folks, Since disable-output-escaping doesn't work on firefox (and isn't going to), whats the next best way of including raw markup in the output of an XSTL transform? (Background: I've got raw HTML in a database that I want to wrap in XML to send to a browser to render. I've got control of both the XML and the stylesheet, but no control of the HTML, which may be badly formed (even for HTML!)) Thanks

    Read the article

  • shell script redirect output

    - by Andy
    I have a shell script to monitor process due to preventing the process closed. If the process is closed, that script will restart it. BTW, when the system starts, the crontab will run the script automatically. How can I get the output of the process which started by the shell script? #!/bin/bash PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin export PATH while : do if [ -z "$(ps -ef | grep -v grep | grep 225.0.6.4)" ]; then date +"%m-%d-%y %T" >> /home/andy/log/stream.log echo "225.0.6.4 - 103 not worked and restart process" >> /home/andy/log/stream.log echo "225.0.6.4 - 103 not worked and restart process" /usr/bin/tzap -a 1 -c /home/andy/channels.conf -o - -r -p "D" | /home/andy/ffmpeg -f mpegts -i pipe:0 -c:v libx264 -preset medium -crf 23 -bufsize 3000K -minrate 1200k -maxrate 1200k -pix_fmt yuv420p -g 50 -s 1024x768 -acodec libmp3lame -b:a 128k -ac 2 -ar 44100 -f mpegts udp://225.0.6.4:50000 & fi sleep 1 done

    Read the article

  • Rreport / LaTeX quality output package

    - by aL3xa
    I'm looking for some LaTeX template for creating quality output. On R-bloggers I've bumped on Frank Harrel's Rreport package. Due to my, quite modest LaTeX abilities, only user-friendly (and noob-friendly) interface should suffice. Here's a link to an official website. I'm following the instructions, but I cannot manage to install an app. I use Ubuntu 9.10, R version is 2.10.1 (updated regularly from UCLA's CRAN server)... of course, cvs is installed on my sistem. Now, I'd like to know is there some user-friendly LaTeX template package (Sweave is still to advanced/spartan for me). I'm aware that my question is quite confounding, but brief glance on examples on Rreport page should give you a hint. I'm aware that LaTeX skills are a must, but just for now I need something that will suite my needs (as a psychological researcher). Is there any pandan for Rreport package?

    Read the article

  • formatting the output of a sql query.

    - by randeepsp
    Hi! I am using solaris os. from solaris im logging into sql plus. my database is oracle 9i. i am spooling the output of my query into a file. i want in .csv format so that i can copy it into excel. can any1 help me out. my query is like. select name,id,location from employee;

    Read the article

  • Program output to file in Java (and reading it again)

    - by Cohagen
    I have a large main method in an IO class which creates objects from four different classes in my program (which all use one another to some extent). My main method takes all info in using a scanner, from the console window, and uses this info to call the constructors and methods in the other classes. As this is my first full program in Java I have been focussed on making the main method work via the console, without properly considering file input and output. I cannot see an easy way of making that work now. Ideally what I require is some way of writing everything I input to the console while running the main method to a file, in a format that can be read again and inputed back through the main method? I have refrained from posting the main method as it is 250+ lines long, but will post any relevant parts of it if required. Any help appreciated

    Read the article

  • The HTG Guide to Using a Bluetooth Keyboard with Your Android Device

    - by Matt Klein
    Android devices aren’t usually associated with physical keyboards. But, since Google is now bundling their QuickOffice app with the newly-released Kit-Kat, it appears inevitable that at least some Android tablets (particularly 10-inch models) will take on more productivity roles. In recent years, physical keyboards have been rendered obsolete by swipe style input methods such as Swype and Google Keyboard. Physical keyboards tend to make phones thick and plump, and that won’t fly today when thin (and even flexible and curved) is in vogue. So, you’ll be hard-pressed to find smartphone manufacturers launching new models with physical keyboards, thus rendering sliders to a past chapter in mobile phone evolution. It makes sense to ditch the clunky keyboard phone in favor of a lighter, thinner model. You’re going to carry around in your pocket or purse all day, why have that extra bulk and weight? That said, there is sound logic behind pairing tablets with keyboards. Microsoft continues to plod forward with its Surface models, and while critics continue to lavish praise on the iPad, its functionality is obviously enhanced and extended when you add a physical keyboard. Apple even has an entire page devoted specifically to iPad-compatible keyboards. But an Android tablet and a keyboard? Does such a thing even exist? They do actually. There are docking keyboards and keyboard/case combinations, there’s the Asus Transformer family, Logitech markets a Windows 8 keyboard that speaks “Android”, and these are just to name a few. So we know that keyboard products that are designed to work with Android exist, but what about an everyday Bluetooth keyboard you might use with Windows or OS X? How-To Geek wanted look at how viable it is to use such a keyboard with Android. We conducted some research and examined some lists of Android keyboard shortcuts. Most of what we found was long outdated. Many of the shortcuts don’t even apply anymore, while others just didn’t work. Regardless, after a little experimentation and a dash of customization, it turns out using a keyboard with Android is kind of fun, and who knows, maybe it will catch on. Setting things up Setting up a Bluetooth keyboard with Android is very easy. First, you’ll need a Bluetooth keyboard and of course an Android device, preferably running version 4.1 (Jelly Bean) or higher. For our test, we paired a second-generation Google Nexus 7 running Android 4.3 with a Samsung Series 7 keyboard. In Android, enable Bluetooth if it isn’t already on. We’d like to note that if you don’t normally use Bluetooth accessories and peripherals with your Android device (or any device really), it’s best practice to leave Bluetooth off because, like GPS, it drains the device’s battery more quickly. To enable Bluetooth, simply go to “Settings” -> “Bluetooth” and tap the slider button to “On”. To set up the keyboard, make sure it is on and then tap “Bluetooth” in the Android settings. On the resulting screen, your Android device should automatically search for and hopefully find your keyboard. If you don’t get it right the first time, simply turn the keyboard on again and then tap “Search for Devices” to try again. If it still doesn’t work, make sure you have fresh batteries and the keyboard isn’t paired to another device. If it is, you will need to unpair it before it will work with your Android device (consult your keyboard manufacturer’s documentation or Google if you don’t know how to do this). When Android finds your keyboard, select it under “Available Devices” … … and you should be prompted to type in a code: If successful, you will see that device is now “Connected” and you’re ready to go. If you want to test things out, try pressing the “Windows” key (“Apple” or “Command”) + ESC, and you will be whisked to your Home screen. So, what can you do? Traditional Mac and Windows users know there’s usually a keyboard shortcut for just about everything (and if there isn’t, there’s all kinds of ways to remap keys to do a variety of commands, tasks, and functions). So where does Android fall in terms of baked-in keyboard commands? There answer to that is kind of enough, but not too much. There are definitely established combos you can use to get around, but they aren’t clear and there doesn’t appear to be any one authority on what they are. Still, there is enough keyboard functionality in Android to make it a viable option, if only for those times when you need to get something done (long e-mail or important document) and an on-screen keyboard simply won’t do. It’s important to remember that Android is, and likely always will be a touch-first interface. That said, it does make some concessions to physical keyboards. In other words, you can get around Android fairly well without having to lift your hands off the keys, but you will still have to tap the screen regularly, unless you add a mouse. For example, you can wake your device by tapping a key rather than pressing its power button. However, if your device is slide or pattern-locked, then you’ll have to use the touchscreen to unlock it – a password or PIN however, works seamlessly with a keyboard – other things like widgets and app controls and features, have to be tapped. You get the idea. Keyboard shortcuts and navigation As we said, baked-in keyboard shortcut combos aren’t necessarily abundant nor apparent. The one thing you can always do is search. Any time you want to Google something, start typing from the Home screen and the search screen will automatically open and begin displaying results. Other than that, here is what we were able to figure out: ESC = go back CTRL + ESC = menu CTRL + ALT + DEL = restart (no questions asked) ALT + SPACE = search page (say “OK Google” to voice search) ALT + TAB (ALT + SHIFT + TAB) = switch tasks Also, if you have designated volume function keys, those will probably work too. There’s also some dedicated app shortcuts like calculator, Gmail, and a few others: CMD + A = calculator CMD + C = contacts CMD + E = e-mail CMD + G = Gmail CMD + L = Calendar CMD + P = Play Music CMD + Y = YouTube Overall, it’s not a long comprehensive list and there’s no dedicated keyboard combos for the full array of Google’s products. Granted, it’s hard to imagine getting a lot of mileage out of a keyboard with Maps but with something like Keep, you could type out long, detailed lists on your tablet, and then view them on your smartphone when you go out shopping. You can also use the arrow keys to navigate your Home screen over shortcuts and open the app drawer. When something on the screen is selected, it will be highlighted in blue. Press “Enter” to open your selection. Additionally, if an app has its own set of shortcuts, e.g. Gmail has quite a few unique shortcuts to it, as does Chrome, some – though not many – will work in Android (not for YouTube though). Also, many “universal” shortcuts such as Copy (CTRL + C), Cut (CTRL + X), Paste (CTRL + V), and Select All (CTRL + A) work where needed – such as in instant messaging, e-mail, social media apps, etc. Creating custom application shortcuts What about custom shortcuts? When we were researching this article, we were under the impression that it was possible to assign keyboard combinations to specific apps, such as you could do on older Android versions such as Gingerbread. This no long seems to be the case and nowhere in “Settings” could we find a way to assign hotkey combos to any of our favorite, oft-used apps or functions. If you do want custom keyboard shortcuts, what can you do? Luckily, there’s an app on Google Play that allows you to, among other things, create custom app shortcuts. It is called External Keyboard Helper (EKH) and while there is a free demo version, the pay version is only a few bucks. We decided to give EKH a whirl and through a little experimentation and finally reading the developer’s how-to, we found we could map custom keyboard combos to just about anything. To do this, first open the application and you’ll see the main app screen. Don’t worry about choosing a custom layout or anything like that, you want to go straight to the “Advanced settings”: In the “Advanced settings” select “Application shortcuts” to continue: You can have up to 16 custom application shortcuts. We are going to create a custom shortcut to the Facebook app. We choose “A0”, and from the resulting list, Facebook. You can do this for any number of apps, services, and settings. As you can now see, the Facebook app has now been linked to application-zero (A0): Go back to the “Advanced settings” and choose “Customize keyboard mappings”: You will be prompted to create a custom keyboard layout so we choose “Custom 1”: When you choose to create a custom layout, you can do a great many more things with your keyboard. For example, many keyboards have predefined function (Fn) keys, which you can map to your tablet’s brightness controls, toggle WiFi on/off, and much more. A word of advice, the application automatically remaps certain keys when you create a custom layout. This might mess up some existing keyboard combos. If you simply want to add some functionality to your keyboard, you can go ahead and delete EKH’s default changes and start your custom layout from scratch. To create a new combo, select “Add new key mapping”: For our new shortcut, we are going to assign the Facebook app to open when we key in “ALT + F”. To do this, we press the “F” key while in the “Scancode” field and we see it returns a value of “33”. If we wanted to use a different key, we can press “Change” and scan another key’s numerical value. We now want to assign the “ALT” key to application “A0”, previously designated as the Facebook app. In the “AltGr” field, we enter “A0” and then “Save” our custom combo. And now we see our new application shortcut. Now, as long as we’re using our custom layout, every time we press “ALT + F”, the Facebook app will launch: External Keyboard Helper extends far beyond simple application shortcuts and if you are looking for deeper keyboard customization options, you should definitely check it out. Among other things, EKH also supports dozens of languages, allows you to quickly switch between layouts using a key or combo, add up to 16 custom text shortcuts, and much more! It can be had on Google Play for $2.53 for the full version, but you can try the demo version for free. More extensive documentation on how to use the app is also available. Android? Keyboard? Sure, why not? Unlike traditional desktop operating systems, you don’t need a physical keyboard and mouse to use a mobile operating system. You can buy an iPad or Nexus 10 or Galaxy Note, and never need another accessory or peripheral – they work as intended right out of the box. It’s even possible you can write the next great American novel on one these devices, though that might require a lot of practice and patience. That said, using a keyboard with Android is kind of fun. It’s not revelatory but it does elevate the experience. You don’t even need to add customizations (though they are nice) because there are enough existing keyboard shortcuts in Android to make it usable. Plus, when it comes to inputting text such as in an editor or terminal application, we fully advocate big, physical keyboards. Bottom line, if you’re looking for a way to enhance your Android tablet, give a keyboard a chance. Do you use your Android device for productivity? Is a physical keyboard an important part of your setup? Do you have any shortcuts that we missed? Sound off in the comments and let us know what you think.     

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >