Search Results

Search found 5628 results on 226 pages for 'ram kumar'.

Page 9/226 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• Computer slow after installing 32GB RAM

  - by John Gilmore

  I'm currently running very large network simulations for my PhD research, for which I need lots of RAM. I have a Core i7 2600K processor with a Gigabyte GA-Z68AP-D3 motherboard, running Windows 7 professional 64bit. I bought the system with 8GB (2x4GB) DDR3 1600 MHz Corsair Vengeance RAM and the system ran like a dream. I'm planning to upscale my simulations so I removed the 2x4GB RAM and installed 4x8GB DDR 1600 MHz Corsair Vengeance RAM. When I rebooted the system, boot time was much longer than usual (10 mins just to get to login screen). After logging in, the whole system was unresponsive. I tried playing some games (Bioshock 2), but it was unplayable. I've not had this problem before and I have an ATI Radeon HD 5850 graphics card, so that's not the problem. The only thing that's changed is the RAM. I've looked through the specifications of Windows, my motherboard and my CPU and they all state that 32GB of RAM is supported. Does anyone have an idea of what's going on? Any help would be greatly appreciated.

  Read the article

• Laptop won't boot with both memory slots used

  - by Johnny W

  I'm currently trying to upgrade my old Sony Vaio VGN-SZ1HP/B to 2GB of RAM. It already had 1GB of Crucial RAM in one of its slots, and one empty. I checked on Crucial.com and it confirms that each bank can hold 1GB of PC2-5300. The 1GB stick already installed was this, but Crucial's page recommended this... The two are identical from what I can make out, so I just ordered another one of the former. Unfortunately the machine refuses to even POST with both sticks installed. If I remove the old RAM from Slot 1 and replace it with the new RAM it runs fine. If I leave Slot 1 empty and put RAM (either stick) in Slot 2, it won't POST. Basically it seems that Slot 2 just isn't working properly. Does anyone have any ideas on how to solve this problem? Or maybe have any experience with this sort of thing with Sony Vaios? Thanks for any help!

  Read the article

• Can you tell DDR and DDR2 apart visually?

  - by Macha

  I'm getting a few old computers to take apart for parts soon. Most of them are defintely using DDR2 RAM, but there is the possibility that one or two of them are using DDR RAM. Since these are quite old, the manuals have since been lost. Is it possible to tell DDR and DDR2 RAM apart visually, and if so how?

  Read the article

• Do I still get the benefits of dual channel if I put 2x1GB in one side and 1x2GB in the other?

  - by Kenji Kina

  My PC currently has 2x1GB RAM sticks, and was considering on buying a 2GB RAM stick so that I could move it to a new PC in the future in case it was needed. Would I get the benefits of dual channel or should I necessarily buy 2x1GB sticks? (which, in a way, restricts me to 4GB of RAM if I don't want to scrap a couple of those later).

  Read the article

• Computer keeps restarting [closed]

  - by Joris

  I have a strange problem with my desktop pc, when I start it, it just restarts immediately, it displays the bios/motherboard logo and then restarts. I can't access the bios to edit settings because it restarts to fast. Then I tried different things to fix it with mixed success. (I also tried to reset the bios without success) I noticed that a capacity from the graphics card was broken (it looked exploded) so I ordered a new graphics card & plugged it in the computer. It didn't change much, still the same problem. Then I unplugged everything that's not necessary and put only 1Gig RAM in the motherboard (usually it has 4 x 1Gig RAM) and the computer started, then I putted another gig of RAM and the computer still started. (starting=booting windows) When I putted in the 3th RAM it didn't boot anymore (again restarting all the time) so I removed this 3th gig of RAM and this is where it gets weird. I expected the computer to boot again because it is exactly the same configuration as before - which worked - but the computer didn't want to start. It just gave the same problem as before (restarting all the time.. ) Anyone an idea what might be wrong?

  Read the article

• Lubuntu 12.04 on Acer laptop boots to blank blue screen

  - by WGCman

  My previous question on this was closed, but I am posting it again as the solution which my son eventually found may assist other users of the forum, or someone may be able to tweak the solution to improve the performance. Having installed Kubuntu 12.04.01 from a live USB onto my desktop, I wanted to do the same on my laptop, an Acer Aspire 1362 Laptop, which has 256MB RAM (actually 512 "on the box", but a good deal can be borrowed by the graphics!). I found Kubuntu wouldn't run on so little memory but downloaded: Lubuntu-12.04-alternate-i386.iso, which I understood was light enough to go. The laptop has one internal 40GB Toshiba hard drive divided into 3 partitions: C,19GB with Windows XP, Windows program files and some data, D, 19GB mostly data, and a small 2GB partition with some Acer software, which XP can't normally “see”. I transferred most of the contents of D to a memory stick, leaving 16GB free for Lubuntu. I did not want to dump XP yet, though it is painfully slow. I installed Lubuntu from then USB stick, accepting the default answers to most of the questions. The D: partition was further partitioned into a 500MB boot partition, 10GB for Linux, 2GB Swap and 6GB for data shareable between Linux and Windows. I had no error messages during installation, rebooted, was offered the choice of Ubuntu or XP, and selected the former. After a few minutes, I get a dark blue screen announcing Lubuntu with five dots underneath which lighten in turn. Eventually the lights stopped, and whatever I try the screen remains blank apart from “Lubuntu” I tried several solutions suggested on the forum for “identical” questions but without success.

  Read the article

• wake up from suspend to ram problem

  - by Pupizoid

  I have very strange problem. After suspending to ram notebook doesn't wakes up, only leds and fan switches on, no HDD activity and display stays off(without backlights-completly off). If I press numlock- led doesn't switches, all buttons are not warkable. I have installed uswsusp and tryed to use s2ram, but result is exactly similar. I tryed to remove fglrx, but useless. I have HP Pavilion dv6 2055er with Ubuntu 12.04 on board and: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series] How can I solve this problem?

  Read the article

• Distro that I can load into RAM?

  - by NullUserException

  Is there a modified version of Ubuntu that I can choose to load to RAM on start up? Kinda like the LiveCD, but that can be easily modified (ie: I can install stuff) when I choose to boot from disk. The idea is to install it to a USB drive. I know there's something similar but slax is lacking in many departments. A "full" version Ubuntu would be better. A LiveUSB installation seems to be pretty close to what I want, but apparently I have to choose whether or not it will be persistent by the time I install it. I want to be able to choose that every time I boot.

  Read the article

• which flavor of Ubuntu works on ASUS P4GE MX mobo with P4 and 1gb ram

  - by user209546

  I have Ubuntu 13.10 installed on ASUS P4GE MX Mother board with Intel 845 Chip set and Pentium 4 processor with 1GB ram. Unity and Dash are not loaded, hence not able to close any page opened by right clicking on blank desktop and entering into 'change desktop background'. Live wall papers are working but the setting page is not closing as no buttons are available on the panel. I removed Ubuntu 13.10 and tried with 13.04 / 12.10 / 12.04 / 11.10 and 11.04. Ubuntu 11.04 is working but the problem is that it out of date and upgrades available. Please provide a way / solution

  Read the article

• Distro that I can load to ram?

  - by NullUserException

  Is there a modified version of Ubuntu that I can choose to load to RAM on start up? Kinda like the LiveCD, but that can be easily modified (ie: I can install stuff) when I choose to boot from disk. The idea is to install it to a USB drive. I know there's something similar but slax is lacking in many departments. A "full" version Ubuntu would be better. A LiveUSB installation seems to be pretty close to what I want, but apparently I have to choose whether or not it will be persistent by the time I install it. I want to be able to choose that every time I boot.

  Read the article

• How much RAM required by Varnish?

  - by Gobind Singh Deo

  Hi, I'm using Apache for serving static files. Apache2 require too much RAM. I want to reduce the RAM usage. I don't have experience with Varnish. It's said to be faster. I don't know how Varnish works. So, How much RAM needed for running Apache2+Varnish? Will Apache2+Varnish have higher RAM usage than Apache2 without Varnish? Thanks.

  Read the article

• High RAM usage, not seen in task manager

  - by r4dk0

  Hi! I am using Windows 7 64-bit 7600, with 4Gb of RAM. I have a serious problem, since something uses a lot of RAM(3.94Gb) and I see "stairs" in taskmanager, it rises to +3Gb RAM and it drops to about 2Gb and then rises slowly again, and suddenly drops. I tryed installing this version again and other versions, newer ones, but no effect. Ive even tryed disconnecting other harddrives while I installed it, and then installed NOD32 and updated it. How could I know what is using that much RAM? P.S.: I was suspecting superfetch service, I disabled it, restarted pc, and it didnt work, since the memory is the highest point when I login with password, it is really annoying since I need about 1minute to see my desktop, neither alone try anything else. After loging in it slowly drops and after random time it starts rising again. That doesnt happen immediately after a fresh windows install. And how the drivers go, I tryed older drivers for GPU, and newest ones.

  Read the article

• High RAM usage, not seen in task manager

  - by r4dk0

  Hi! I am using Windows 7 64-bit 7600, with 4Gb of RAM. I have a serious problem, since something uses a lot of RAM(3.94Gb) and I see "stairs" in taskmanager, it rises to +3Gb RAM and it drops to about 2Gb and then rises slowly again, and suddenly drops. I tryed installing this version again and other versions, newer ones, but no effect. Ive even tryed disconnecting other harddrives while I installed it, and then installed NOD32 and updated it. How could I know what is using that much RAM? P.S.: I was suspecting superfetch service, I disabled it, restarted pc, and it didnt work, since the memory is the highest point when I login with password, it is really annoying since I need about 1minute to see my desktop, neither alone try anything else. After loging in it slowly drops and after random time it starts rising again. That doesnt happen immediately after a fresh windows install. And how the drivers go, I tryed older drivers for GPU, and newest ones.

  Read the article

• More RAM in motherboard than CPU can process

  - by Videographer Francisco Ferrer

  As I understand reading in the forum post :" By making more memory available to the system more data can be cached in RAM, so there will be less hard drive activity, and less swapping to memory so your system will perform better." But what happen when motherboard for a desktop that supports( and had install) more RAM than the procesor can handle?(aka:procesor Max Memory Size). Is there any advantage to have a MB that hold a bigger RAM capacity than the CPU? If so, how can this be translate using in a program like Adobe After Effects, RAM preview? thanks

  Read the article

• How does RAM fail?

  - by ethanlee16

  I have an issue with a Dell Inspiron 15 (1545) laptop that refuses to open any applications (save select Microsoft programs, e.g. Security Essentials, Ctrl Panel, Windows Explorer (not Internet), regedit, Event Viewer, etc.). I've run Microsoft Memory Diagnostics Tool and it found a 'hardware problem was detected.' Does this indicate that the RAM has failed? I notice when I open programs like Word, Excel, Internet Explorer, etc., it always give me an error from WerFault.exe saying The instruction at xxxxxxx referenced memory at xxxxxxxxx. The memory could not be written. and sometimes something about illegal instructions. If it is a hardware problem, does this mean that replacing the RAM is my only option? Again, I would also like to know if RAM can fail (like hard drives) and if malware can cause RAM to fail also.

  Read the article

• Only 2.99 Gb RAM usable out of 8GB in Windows 8 32 bit [closed]

  - by user1832280

  Possible Duplicate: 8gb ram in 32bit operating system I have installed 8 GB RAM in my system. Also upgraded OS to Windows 8 32 bit. My System configuration: Intel i7 960. Ram Crossair 4 GB X 2 1666Mhz Motherboard Asus Rampage III Gene Video card: NVIDIA GeForce GT 240. 2 TB Seagate I have updated all drivers BIOS also. But my system showing only 2.99 GB out of 8GB usable RAM. Please help me fix this problem.

  Read the article

• I bought a motherboard that supports DDR3 RAM

  - by CVertex

  I bought this ASUS Sabertooth X58 motherboard from http://msy.com.au/product.jsp?productId=7301 But I'm not sure what DDR3 RAM to buy. I haven't built a PC from scratch in about 3 years, and I'm wondering the following Do DDR3 ram chips need to be installed in three at a time? Or can I just install one or two now and install more later without any particular pattern? If I buy 2000MHz RAM from Corsair, will that work at 1866 MHz? (which is the highest frequency the motherboard supports) Is it just me or is 1866 RAM not around? Any help is greatly appreciated.

  Read the article

• HD latency measurement using bonnie++ on different machines with different RAM size

  - by j0nes

  Hello, I have run bonnie++ v1.96 on two different servers without any additional load. One server is a "physical" Dell server with 32GB RAM, the other one is a virtual instance with 14GB RAM. I have read in the bonnie manuals that I should use two times the size of RAM in my bonnie runs, so I used 64GB on the physical machine and 28GB on the virtual machine. Now I want to compare the results, and I am wondering whether the results are comparable at all. The most interesting part is the latency part - on the physical machine, the values are about 10 times higher than on the virtual machine! Can I take these results seriously (e.g. the virtual machine HD is much much faster) or does the different RAM size tamper the results? Thanks! Jonas

  Read the article

• Only some motherboards can support faster RAM?

  - by Wesley

  This is a question relating to one of my builds. Here are the specs: ECS P4VXASD2+ V5.0 motherboard Intel P4 Northwood 2.8 GHz (533 MHz FSB, 512 KB L2) 2x 1GB PC3200 DDR RAM Maxtor 300GB IDE HDD 16 MB NVIDIA TNT2 Pro AGP OKIA 300W ATX PSU Gigabyte 52x CD-ROM The issue right now is that I'm trying to install Windows XP from the CD drive but the computer randomly restarts partway through installation. My other build was BSODing due to RAM latency errors. This ECS board manual states that memory modules "up to 333 MHz" (i.e. PC2700) is supported. However, I am running PC3200 modules, which is clearly faster than PC2700. Would this be causing the computer from randomly restarting? EDIT 1: I also wanted to mention that my Emachines T2482 is actually running 2x 512MB PC3200 DDR RAM when it should only be supporting PC1600 and PC2100 DDR RAM. Yet there are no issues with it.

  Read the article

• System beeps continuously if both RAM sticks inserted

  - by JGB146

  I have two sticks of OCZ 2GB PC2 9600 RAM. When I attempt to boot with both sticks inserted, I am met with a continuous string of system beeps (and no bootup). The system boots fine when only one stick is inserted, but obviously that leaves me with less RAM than I'd like to have. What could the problem be? System specs are: Gigabyte GA-EP45-UD3L Intel Core 2 Quad Q9400 Sticks of OCZ 2GB PC2 9600 RAM Zotac GeForce GTS 250 1GB 2x Seagate 500GB SATA HDs

  Read the article

• Need for page file with 12 GB RAM

  - by MartinStettner

  Hi, I recently got my new PC with 12 GB RAM (running Windows 7 64bit). The default installation suggests a 12 GB page file on the system drive (which I think is both inefficient and expensive on a SSD drive...) I'm wondering if I need any virtual memory at all, 12 GB being more than I had on my previous machine including the page file (I had 3GB RAM + 3GB pagefile). Thanks Martin EDIT As mokubai pointed out, the question is pretty much answered in Windows 7 pagefile size with large RAM and SSD

  Read the article

• sizes of RAM, of virtual memory and of swap for 32-bit OS

  - by Tim

  If I understand correctly, a 32-bit OS (Ubuntu) can only address 4GiB memory, so RAM with size larger than 4Gib will only be used 4Gib of itself and the rest is a waste. I am now confused about this situation for RAM with similar one for virtual memory and for swap. with virtual memory being swap + RAM, if the size of the virtual memory exceeds 4Gib, will the exceeding part be a waste for the 32-bit OS? if I now have to choose the size for my swap partition, is it a factor to consider that the 32-bit OS can only address 4GiB memory? Does the size of swap have to be chosen with respect to the 4Gib addressible limitation? Will the swap exceeding 4GiB always be a waste? is virtual memory equal to RAM and swap? or can virtual memory use space on the hard drive outside the swap partition? Thanks and regards!

  Read the article

• memtest incorrectly recognizes my RAM

  - by Brendan Abel

  I recently built a computer and randomly got a couple blue screens. I've run memtest and one of the memory sticks consistently throws memtest errors, while the other does not. The odd part is, memtest lists the following settings for my RAM: RAM: 535 MHz DDR 107 / CAS 2.5-1-3-1 DDR1 128 bits But my RAM is DDR3 1600? Memtest also lists my cpu as AMD K8, even though it's K10. I've probably going to RMA the ram stick, but I just wanted to see if anyone had any insight into the weird memtest stats.

  Read the article

• Will this RAM work well in an iMac?

  - by sala_7

  I want to increase the RAM of my 2.4GHz Intel Core 2 Duo 24" iMac. I currently have 1GB of RAM DDR2 SDRAM 667 MHz. I really want to upgrade, but know nothing about RAM or hardware in general... These are the cards I found: http://www.crucial.com/eu/store/mpartspecs.aspx?mtbpoid=D4B6F603A5CA7304 Are these of quality or should I look at something else? Finally, I have 800MHz of Bus speed, couldn't I get faster RAM? Thanks for taking the time to read, and hoping you take the time to answer.

  Read the article

• Motherboard Issue - 3 Beep Bios (memory error) despite new RAM

  - by Glenn

  I have an Intel dG43RK motherboard, bought new and sealed, and have tried two different brands and speeds of RAM with a 3-beep BIOS indicating a memory error, which also occurs without RAM installed (as it should). The memory tried is; 1x4GB 1333 Kingston HyperX DDR3 RAM (New and Sealed) 2x4GB Team Elite 1066 DDR3 RAM (New and Sealed) I have tried multiple configurations and seating layouts and still no luck. I also have a GT520 graphics card on board as I dislike in-built graphics in most cases and had it at hand (also new and sealed). The only used parts are the CPU, which worked in my previous tower and was directly taken from the PC into the new set-up and the CPU Fan which will be replaced with a new fan in the foreseeable future once this is resolved. I've run out of ideas myself and any help is appreciated.

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >