Search Results

Search found 258 results on 11 pages for 'sensors'.

Page 9/11 | < Previous Page | 5 6 7 8 9 10 11  | Next Page >

  • IPMI sdr entity 8 (memory module) only showing 3 records?

    - by thinice
    I've got two Dell PE R710's - A has a single socket and 3 DIMMs in one bank B has both sockets and 6 (2 banks @ 3 DIMMs) filled The output from "ipmitool sdr entity 8" confuses me - according to the OpenIPMI documentation these are supposed to represent DIMM slots. Output from A (1 CPU, 3 DIMMS, 1 bank.): ~#: ipmitool sdr entity 8 Temp | 0Ah | ok | 8.1 | 27 degrees C Temp | 0Bh | ns | 8.1 | Disabled Temp | 0Ch | ucr | 8.1 | 52 degrees C Output from B (2 CPUs, 3 DIMMS in both banks, 6 total): ~#: ipmitool sdr entity 8 Temp | 0Ah | ok | 8.1 | 26 degrees C Temp | 0Bh | ok | 8.1 | 25 degrees C Temp | 0Ch | ucr | 8.1 | 51 degrees C Now, I'm starting to think this output isn't DIMMS themselves, but maybe a sensor for each bank and something else? (Otherwise, shouldn't I see 6 readings for the one with both banks active?) The CPU's aren't near 50 deg C, so I doubt the significantly higher reading is due to proximity - Is anyone able to explain what I'm seeing? Does the output from my ipmitool sdr entity 8 -v here on pastebin seem to hint at different sensors? The sensor naming conventions are poor - seems like a dell thing. Here is output from racadm racdump

    Read the article

  • Collect temperature and fan speed with munin from Windows 7 PC?

    - by mfn
    Hi, I'm quite fond of munin and using it also at home to monitor my PCs. What was super-duper easy under Linux is pretty much unsolvable for me under Windows: I'd like to monitor CPU and Motherboard temperatures as well as fan speed. On Linux I'm using lm-sensors and the plugin for munin was basically there. I access already some information from my Windows machine via SNMP (disk space, CPU usage, memory usage); the graphs are simple as is the information exposed via SNMP, but they do their job. But when it comes to temperature and fan speed I'm running against a wall. My research so far resulted in that Windows does not by default provide out of the box ability to retrieve temperature/fan speed data. Third party applications are necessary which have know-how how to communicate with the Motherboard chips. The best I cam up with is that SpeedFan exposes a shared memory interface and there exists a library which hooks into Windows SNMP facility and bridges over to SpeedFans shared memory interface; it's called SFSNMP (site currently down). Unfortunately the library doesn't work, there's a bug report at SpeedFan open about it, but it's currently not moving (although the SFSNMP author is active there) . So, unless that's going to work like anytime soon, are there any alternatives? I'm not found of buying any software to get that feature, given that I take it as granted that my system exposes me the information to properly monitor it, but anyway don't just not answer because of this.

    Read the article

  • Samsung laptop randomly shuts down

    - by Dmatig
    I've rewritten this question because it turned into an indecipherable mess. I have a Samsung R560 laptop that is overheating, and shutting itself down under load consistantly. Thank you quickcel for reccomending me Speedfan to monitor my temps. Here they are (Load / Idle): (Ignore "Temp1 and Temp2", whatever sensors they are they'd always random, pretty sure they're broke). The load temperature is after just 5 minites of playing Fallout 3 - another 5 minutes and it (the GPU - 9600M GS) consistantly breaches the mid 90's then shuts down, so it's hard to get a good picture of it. I'm looking for some solution or way to decrease these temperatures, because they seem far too high even idle. I've tried: Opening up the case and clearing of all dust with compressed air. Updating drivers for my Graphics card Have purchased and am using a notebook cooler I don't want to: Undervolt / underclock (defeats the point of having a more expensive card) Use lower power / performance settings (again, i might as well have bought something cheaper) Is there anything else i can try (software or inexpensive hardware) that can help me fix this? Has anybody had a Samsung laptop and knows if this can be sorted under my warranty, and the turnaround time of sending it off (UK?)(it has always ran hotter than it should, but now at 6 months old is getting hot enough to power off)

    Read the article

  • Collect temperature and fan speed with munin from Windows 7 PC?

    - by nfm
    Hi, I'm quite fond of munin and using it also at home to monitor my PCs. What was super-duper easy under Linux is pretty much unsolvable for me under Windows: I'd like to monitor CPU and Motherboard temperatures as well as fan speed. On Linux I'm using lm-sensors and the plugin for munin was basically there. I access already some information from my Windows machine via SNMP (disk space, CPU usage, memory usage); the graphs are simple as is the information exposed via SNMP, but they do their job. But when it comes to temperature and fan speed I'm running against a wall. My research so far resulted in that Windows does not by default provide out of the box ability to retrieve temperature/fan speed data. Third party applications are necessary which have know-how how to communicate with the Motherboard chips. The best I cam up with is that SpeedFan exposes a shared memory interface and there exists a library which hooks into Windows SNMP facility and bridges over to SpeedFans shared memory interface; it's called SFSNMP (site currently down). Unfortunately the library doesn't work, there's a bug report at SpeedFan open about it, but it's currently not moving (although the SFSNMP author is active there) . So, unless that's going to work like anytime soon, are there any alternatives? I'm not found of buying any software to get that feature, given that I take it as granted that my system exposes me the information to properly monitor it, but anyway don't just not answer because of this.

    Read the article

  • Wireless card overheating?

    - by Sidney
    Ok, so I've had my laptop for several years (I wanna say 4, but possibly more), it's a Toshiba Satellite. I'm running Linux mint 15, and am having a strange new issue, after several hours of running my wireless stops. It can SEE wireless networks, but refuses to connect to any of them. (On a sidenote, connecting to a router with a cable at this point works fine) The fact that it can SEE the networks make me think the card is in good condition, and it's software related The fact that it works for several hours before booting me makes me think perhaps the transmitter is getting too hot. I don't use my laptop in dusty environments, and keep it on an elevated surface (alternatively, I actively try not to let it sit on soft surfaces where the vents get covered). I spray out the cpu fan about once a year with compressed air about once a year, so I really don't think the insides should be too dirty. Finally, unfortunately, sensors only gives me CPU temps, but they run about 40-50 degrees C, which from my understanding is perfectly normal for an I3. Does anyone have any suggestions on what I can do to determine the root cause of this?

    Read the article

  • High fan speed with no reason

    - by Klaus
    For a few weeks, the fans of my Lenovo B590 laptop, running on Xubuntu 14, turn to high speed a few minutes after it is turned on. The fans won't speed down until I turn the computer off. This is quite strange, since This didn't happen before The temperatures are quite low (are they ?) $sensors Adapter: Virtual device temp1: +36.0°C (crit = +88.0°C) temp2: +30.0°C (crit = +126.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +37.0°C (high = +72.0°C, crit = +90.0°C) Core 0: +34.0°C (high = +72.0°C, crit = +90.0°C) Core 1: +31.0°C (high = +72.0°C, crit = +90.0°C) thinkpad-isa-0000 Adapter: ISA adapter fan1: 0 RPM pkg-temp-0-virtual-0 Adapter: Virtual device temp1: +37.0°C $sudo hddtemp /dev/sda /dev/sda: ST500LT012-9WS142: 33°C The computer is under low load: top - 08:30:15 up 16 min, 2 users, load average: 0.28, 0.23, 0.23 Tasks: 197 total, 1 running, 196 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.8 us, 0.5 sy, 0.0 ni, 98.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem: 3607944 total, 1973956 used, 1633988 free, 99660 buffers KiB Swap: 3744764 total, 0 used, 3744764 free. 789936 cached Mem The BIOS is up to date (and there are no fan settings in it) The fan is clean and dust-free Why would the BIOS turn the fans to high speed where there seem to be no reason for that ? It seems that we cannot control the fan manually with this model, so I guess the only solution is to understand why this happens.

    Read the article

  • MacBook Pro (2007 - ATI-Card) Screen goes half black then shuts down the entire computer

    - by BluePerry
    Hey, when I'm starting my MBP I get about 10-60 seconds of the booting process before the screen goes half black (Its like applying a black to transparent gradient from the left side of the screen to the middle of the screen). After a 5 seconds the entire screen blacks out and the MBP shuts down. There have been issues with heat and some minor artifacts on the screen in the past but nothing serious as far as I know. Everything could be resolved by rebooting or letting the MBP cool down a bit. I would like to identify the problem now. There are 3 possibilities I can think of right now: My graphics card is defect and shuts down after a few seconds. (But if thats true, I find it kind of hard to explain the HALF black screen) My LCD-Panel is defect and sends back wrong signals so the system shuts down??? (I not sure about that) My fan or/and thermal sensors are defect and forcing the graphics card to shut down. Can anyone point if I'm right or if there yet another reason for this. I'd be thankful for any hint or tips. Cheers, Per

    Read the article

  • Output current with Teensy++ 2.0 (arduino-based hardware)

    - by omtinez
    I am working on a project with a Teensy++ 2.0 for testing, eventually the goal is to use a Teensy 2.0 (info on both available here) and mount it onto a robot R/C car along with a Raspberry Pi. I have been able to use and test one of the very cheap distance sensors that use ultrasound, which requires very little current. I was trying to power a motor, I don't know exactly what kind of motor but I assume a very low-power one which is what comes with the R/C car cheapo, but nothing is happening. When I plug the motor to GROUND and +5V it runs fine, but when I use GROUND and one of the GPIO pins then nothing happens with the motor. The same GPIO pins were tested to successfully power and run the ultrasound sensor, so the board is fine. My suspicion is that the GPIO pins don't output enough current to power the motor, but my knowledge of electronics is rather scarce (I am a computer scientist, not an electrical engineer). So please forgive me if I am asking something obvious or plain stupid, but does the board not have enough power to power the motor? If so, I could try to use a second power supply that would go straight into the motor and use the GPIO as a gate to turn that power on and off; would such thing work? Is there a better design that could be used?

    Read the article

  • links for 2011-01-13

    - by Bob Rhubart
    Webcast: Oracle WebCenter Suite: Giving Users a Modern Experience Speakers: Vince Casarez (VP Enterprise 2.0 Product Management, Oracle),  Erin Smith (Consulting Practice Manager – Portals, Oracle), Robert Wessa (Consulting Technical Director – Enterprise 2.0 Infrastructure, Oracle)  (tags: oracle otn webcenter webcast enterprise2.0) Oracle & StickyMinds.com Webcast: Load Testing Techniques for Enterprise Applications Mughees Minhas, Senior Director of Product Management, Oracle Server Technologies, answers your questions about the latest techniques for effectively and efficiently testing enterprise application performance. Thursday, January 20, 2011. 10am PT / 1pm ET. (tags: oracle otn stickymings webcast) Bay Area Coherence Special Interest Group (BACSIG) Jan 20, 5:30pm - 8:00pm PT. Presentations: Coherence 3.6 Clustering Features (Rob Lee), Efficient Management and Update of Coherence Clusters to Reduce Down Time ( Rao Bhethanabotla), How To Build a Coherence Practice (Christer Fahlgren). (tags: oracle, otn coherence bacsig) Podcast Show Notes: William Ulrich and Neal McWhorter on Business Architecture (ArchBeat) A four-part interview with the authors of  "Business Architecture: The Art and Practice of Business Transformation"  (tags: oracle otn podcast businessarchitecture) John Brunswick: Overlapping Social Networks in your Enterprise? Strategies to Understand and Govern "Overall it is important to consider if tacit knowledge being captured by the social systems is able to be retained and somehow summarized into an overall organizational directory." - John Brunswick (tags: oracle otn enterprise2.0 socialnetworking) Coherence - How to develop a custom push replication publisher (Middlewarepedia) Cosmin Todur describes "a way of developing a custom push replication publisher that publishes data to a database via JDBC."  (tags: oracle coherence grid) Aino Andriessen: Oracle Diagnostics Logging (ODL) for application development "Logging is a very important aspect of application development as it offers run-time access to the behaviour and data of the application. It’s important for debugging purposes but also to investigate exception situations on production." -- Aino Andriessen (tags: oracle odl java jdeveloper weblogic) Security issues when upgrading a Web Catalog from 10g to 11g Oracle BI By Bakboord "I blogged about upgrading from Oracle BI EE 10g to Oracle BI EE 11g R1 earlier. Although this is a very straight forward process, you could end up with some security issues." -- Daan Bakboord (tags: oracle businessintelligence obiee) Angelo Santagata: SOA Composite Sensors : Good Practice "A good best practice is that for any composites you create, consider publishing a composite sensor value using a primary key of some sort , e.g. orderId, that way if you need to manipulate/query composites you can easily look up the instanceId using the sensorid." - Angelo Santagata (tags: oracle soa sca) Javier Ductor: WebCenter Spaces 11g PS2 Task Flow Customization "Previously, I wrote about Spaces Template Customization. In order to adapt Spaces to customers prototype, it was necessary to change template and skin, as well as the members task flow. In this entry, I describe how to customize this task flow." - Javier Ductor (tags: oracle otn enterprise2.0 webcenter) RonBatra's blog: Cloud Computing Series: VI: Industry Directions "When someone says their 'Product/Solution is in the Cloud,' ask them basic questions to seperate the spin from the reality. I would start with 'tell me what that means' and see which way the conversation goes." - Oracle ACE Director Ron Batra (tags: oracle otn oracleace cloud) First JSRs Proposed for Java EE 7 (The Java Source) With the approval of Java SE 7 and Java SE 8 JSRs last month, attention is now shifting towards the Java EE platform. (tags: oracle java jsr javaee)

    Read the article

  • Oracle Big Data Software Downloads

    - by Mike.Hallett(at)Oracle-BI&EPM
    Companies have been making business decisions for decades based on transactional data stored in relational databases. Beyond that critical data, is a potential treasure trove of less structured data: weblogs, social media, email, sensors, and photographs that can be mined for useful information. Oracle offers a broad integrated portfolio of products to help you acquire and organize these diverse data sources and analyze them alongside your existing data to find new insights and capitalize on hidden relationships. Oracle Big Data Connectors Downloads here, includes: Oracle SQL Connector for Hadoop Distributed File System Release 2.1.0 Oracle Loader for Hadoop Release 2.1.0 Oracle Data Integrator Companion 11g Oracle R Connector for Hadoop v 2.1 Oracle Big Data Documentation The Oracle Big Data solution offers an integrated portfolio of products to help you organize and analyze your diverse data sources alongside your existing data to find new insights and capitalize on hidden relationships. Oracle Big Data, Release 2.2.0 - E41604_01 zip (27.4 MB) Integrated Software and Big Data Connectors User's Guide HTML PDF Oracle Data Integrator (ODI) Application Adapter for Hadoop Apache Hadoop is designed to handle and process data that is typically from data sources that are non-relational and data volumes that are beyond what is handled by relational databases. Typical processing in Hadoop includes data validation and transformations that are programmed as MapReduce jobs. Designing and implementing a MapReduce job usually requires expert programming knowledge. However, when you use Oracle Data Integrator with the Application Adapter for Hadoop, you do not need to write MapReduce jobs. Oracle Data Integrator uses Hive and the Hive Query Language (HiveQL), a SQL-like language for implementing MapReduce jobs. Employing familiar and easy-to-use tools and pre-configured knowledge modules (KMs), the application adapter provides the following capabilities: Loading data into Hadoop from the local file system and HDFS Performing validation and transformation of data within Hadoop Loading processed data from Hadoop to an Oracle database for further processing and generating reports Oracle Database Loader for Hadoop Oracle Loader for Hadoop is an efficient and high-performance loader for fast movement of data from a Hadoop cluster into a table in an Oracle database. It pre-partitions the data if necessary and transforms it into a database-ready format. Oracle Loader for Hadoop is a Java MapReduce application that balances the data across reducers to help maximize performance. Oracle R Connector for Hadoop Oracle R Connector for Hadoop is a collection of R packages that provide: Interfaces to work with Hive tables, the Apache Hadoop compute infrastructure, the local R environment, and Oracle database tables Predictive analytic techniques, written in R or Java as Hadoop MapReduce jobs, that can be applied to data in HDFS files You install and load this package as you would any other R package. Using simple R functions, you can perform tasks such as: Access and transform HDFS data using a Hive-enabled transparency layer Use the R language for writing mappers and reducers Copy data between R memory, the local file system, HDFS, Hive, and Oracle databases Schedule R programs to execute as Hadoop MapReduce jobs and return the results to any of those locations Oracle SQL Connector for Hadoop Distributed File System Using Oracle SQL Connector for HDFS, you can use an Oracle Database to access and analyze data residing in Hadoop in these formats: Data Pump files in HDFS Delimited text files in HDFS Hive tables For other file formats, such as JSON files, you can stage the input in Hive tables before using Oracle SQL Connector for HDFS. Oracle SQL Connector for HDFS uses external tables to provide Oracle Database with read access to Hive tables, and to delimited text files and Data Pump files in HDFS. Related Documentation Cloudera's Distribution Including Apache Hadoop Library HTML Oracle R Enterprise HTML Oracle NoSQL Database HTML Recent Blog Posts Big Data Appliance vs. DIY Price Comparison Big Data: Architecture Overview Big Data: Achieve the Impossible in Real-Time Big Data: Vertical Behavioral Analytics Big Data: In-Memory MapReduce Flume and Hive for Log Analytics Building Workflows in Oozie

    Read the article

  • F1 Pit Pragmatics

    - by mikef
    "I hate computers. No, really, I hate them. I love the communications they facilitate, I love the conveniences they provide to my life. but I actually hate the computers themselves." - Scott Merrill, 'I hate computers: confessions of a Sysadmin' If Scott's goal was to polarize opinion and trigger raging arguments over the 'real reasons why computers suck', then he certainly succeeded. Impassioned vitriol sits side-by-side with rational debate. Yet Scott's fundamental point is absolutely on the money - Computers are a means to an end. The IT industry is finally starting to put weight behind the notion that good User Experience is an absolutely crucial goal, a cause championed by the likes of Microsoft's Bill Buxton, and which Apple's increasingly ubiquitous touch screen interface exemplifies. However, that doesn't change the fact that, occasionally, you just have to man up and deal with complex systems. In fact, sometimes you just need to sacrifice everything else in the name of performance. You'll find a perfect example of this Faustian bargain in Trevor Clarke's fascinating look into the (diabolical) IT infrastructure of modern F1 racing - high performance, high availability. high everything. To paraphrase, each car has up to 100 sensors, transmitting around 30Gb of data over the course of a race (70% in real-time). This data is then processed by no less than 3 servers (per car) so that the engineers in the pit have access to telemetry, strategy information, timing feeds, a connection back to the operations room in the team's home base - the list goes on. All of this while the servers are exposed "to carbon dust, oil, vibration, rain, heat, [and] variable power". Now, this is admittedly an extreme context where there's no real choice but to use complex systems where ease-of-use is, at best, a secondary concern. The flip-side is seen in small-scale personal computing such as that seen in Apple's iDevices, which are incredibly intuitive but limited in their scope. In terms of what kinds of systems they prefer to use, I suspect that most SysAdmins find themselves somewhere along this axis of Power vs. Usability, and which end of this axis you resonate with also hints at where you think the IT industry should focus its energy. Do you see yourself in the F1 pit, making split-second decisions, wrestling with information flows and reticent hardware to bend them to your will? If so, I imagine you feel that computers are subtle tools which need to be tuned and honed, using the advanced knowledge possessed only by responsible SysAdmins (If you have an iPhone, I suspect it's jail-broken). If the machines throw enigmatic errors, it's the price of flexibility and raw power. Alternatively, would you prefer to have your role more accessible, with users empowered by knowledge, spreading the load of managing IT environments? In that case, then you want hardware and software to have User Experience as their primary focus, and are of the "means to an end" school of thought (you're probably also fed up with users not listening to you when you try and help). At its heart, the dichotomy is between raw power (which might be difficult to use) and ease-of-use (which might have some limitations, but you can be up and running immediately). Of course, the ultimate goal is a fusion of flexibility, power and usability all in one system. It's achievable in specific software environments, and Red Gate considers it a target worth aiming for, but in other cases it's a goal right up there with cold fusion. I think it'll be a long time before we see it become ubiquitous. In the meantime, are you Power-Hungry or a Champion of Usability? Cheers, Michael Francis Simple Talk SysAdmin Editor

    Read the article

  • What Counts For a DBA: Imagination

    - by drsql
    "Imagination…One little spark, of inspiration… is at the heart, of all creation." – From the song "One Little Spark", by the Sherman Brothers I have a confession to make. Despite my great enthusiasm for databases and programming, it occurs to me that every database system I've ever worked on has been, in terms of its inputs and outputs, downright dull. Most have been glorified e-spreadsheets, many replacing manual systems built on actual spreadsheets. I've created a lot of database-driven software whose main job was to "count stuff"; phone calls, web visitors, payments, donations, pieces of equipment and so on. Sometimes, instead of counting stuff, the database recorded values from other stuff, such as data from sensors or networking devices. Yee hah! So how do we, as DBAs, maintain high standards and high spirits when we realize that so much of our work would fail to raise the pulse of even the most easily excitable soul? The answer lies in our imagination. To understand what I mean by this, consider a role that, in terms of its output, offers an extreme counterpoint to that of the DBA: the Disney Imagineer. Their job is to design Disney's Theme Parks, of which I'm a huge fan. To me this has always seemed like a fascinating and exciting job. What must an Imagineer do, every day, to inspire the feats of creativity that are so clearly evident in those spectacular rides and shows? Here, if ever there was one, is a role where "dull moments" must be rare indeed, surely? I wanted to find out, and so parted with a considerable sum of money for my wife and I to have lunch with one; I reasoned that if I found one small way to apply their secrets to my own career, it would be money well spent. Early in the conversation with our Imagineer (Cindy Cote), the job did indeed sound magical. However, as talk turned to management meetings, budget-wrangling and insane deadlines, I came to the strange realization that, in fact, her job was a lot more like mine than I would ever have guessed. Much like databases, all those spectacular Disney rides bring with them a vast array of complex plumbing, lighting, safety features, and all manner of other "boring bits", kept well out of sight of the end user, but vital for creating the desired experience; and, of course, it is these "boring bits" that take up much of the Imagineer's time. Naturally, there is still a vital part of their job that is spent testing out new ideas, putting themselves in the place of a park visitor, from a 9-year-old boy to a 90-year-old grandmother, and trying to imagine what experiences they'd like to have. It is these small, but vital, sparks of imagination and creativity that have the biggest impact. The real feat of a successful Imagineer is clearly to never to lose sight of this fact, in among all the rote tasks. It is the same for a DBA. Not matter how seemingly dull is the task at hand, try to put yourself in the shoes of the end user, and imagine how your input will affect the experience he or she will have with the database you're building, and how that may affect the world beyond the bits stored in your database. Then, despite the inevitable rush to be "done", find time to go the extra mile and hone the design so that it delivers something as close to that imagined experience as you can get. OK, our output still can't and won't reach the same spectacular heights as the "Journey into The Imagination" ride at EPCOT Theme Park in Orlando, where I first heard "One Little Spark". However, our imaginative sparks and efforts can, and will, make a difference to the user who now feels slightly more at home with a database application, or to the manager holding a report presented with enough clarity to drive an interesting decision or two. They are small victories, but worth having, and appreciated, or at least that's how I imagine it.

    Read the article

  • Nest reinvents smoke detectors. Introduces smart and talking smoke detector that keeps quite when you wave

    - by Gopinath
    Nest, the leading smart thermostat maker has introduced a smart home device today- Nest Protect, a smart, talking smoke & carbon monoxide detector that can quite when you wave your hand. Less annoyances and more intelligence Smoke detectors are around for hundreds of years and playing a major role in providing safety from fire accidents at home. But the technology of these devices is stale and there is no major innovation for the past several years. With the introduction of Nest Protect, the landscape of smoke detectors is all set to change just like how Nest thermostat redefined the industry two years ago. Nest Protect is internet enabled and equipped with motion- and smoke-detection sensors so that when it starts beeping you can silence it by waving hand instead of doing circus feats to turn off the alarm. Everyone who cooks in a home equipped with smoke detector would know how annoying it is to turn off sensitive smoke detectors that goes off control quite often. Apart from addressing the annoyances of regular smoke detector, Nest Protect has talking capabilities. It can alert users with clear & actionable instructions when it detects a danger. Instead of harsh beeps it actually speak to you so you know what is happening. It will tell you what smoke it has detected and in which room it is detected. Multiple Nest Protects installed in a home can communicate with each other. Lets say that there is a smoke in bed room, the Nest Protect installed in bed room shares this information to all Nest Protects installed in the home and your kitchen device can alert you that there is a smoke in bed room. There is an App for that The internet enabled Nest Protect has an app to view its status and various alerts. When the Protect is running on low battery it alerts you to replace them soon. If there is a smoke at home and you are away, you will get message alerts. The app works on all major smartphones as well as tablets. Auto shuts down gas furnaces/heaters on smoke Apart from forming a network with other Nest Protect devices installed at home, they can also communicate with Nest Thermostat if it is installed. When carbon monoxide is detected it can shut off your gas furnace automatically. Also with the help of motion detectors it improves Nest Thermostat’s auto-away functionality. It looks elegant and costs a lot more than a regular smoke detector Just like Nest Thermostat, Nest Protect is elegant and adorable. You just fall in love with it the moment you see it. It’s another master piece from the designer of Apple’s iPod. All is good with the Nest Protect, except the price!! It costs whooping $129, which is almost 4 times more expensive than the best selling conventional thermostats available at $30. A single bed room apartment would require at least 3 detectors and it costs around $390 to install Nest Protects compared to 90$ required for conventional smoke detectors. Though Nest Thermostat is an expensive one compared to conventional thermostats, it offered great savings through its intelligent auto-away feature. Users were able to able to see returns on their investments. If Nest Protect also can provide good return on investment the it will be very successful.

    Read the article

  • Why does Ubuntu only detect one USB LAN adapters at a time?

    - by EGO
    I try to connect real switch with my computer for an exam preparation, for this purpose I need more than one LAN cards, and there is only one built in LAN card in my computer. So, to get more LAN cards, I bought 4 USB Ethernet adapters (as I have 4 usb ports in may laptop 2 usb 2.0 ports, 2 usb 3.0 ports). When I plug these adapters in my computer Ubuntu only detects one LAN card from 2.0 usb ports, and one LAN card from 3.0 ports. And sometimes detects only one USB LAN from all the usb ports. Actually the real problem is Ubuntu shows these USB LAN adapters in the "lsusb", but does not list them in "ifconfig". Kontron (Industrial Computer Source / ICS Advent) is my LAN USB ethernet. abc@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hu Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hu Bus 002 Device 012: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 001 Device 003: ID 138a:0018 Validity Sensors, Inc. Bus 001 Device 004: ID 064e:e258 Suyin Corp. Bus 003 Device 011: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 002 Device 013: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 003 Device 012: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 002 Device 005: ID 0a5c:21b4 Broadcom Corp. BCM2070 Bluetooth 2.1 + EDR -- etho is my built in LAN card, while eth1 is the only USB LAN card that ubuntu has detected. abc@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 2c:27:d7:a5:d2:39 inet6 addr: fe80::2e27:d7ff:fea5:d239/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:21056 errors:0 dropped:1 overruns:0 frame:0 TX packets:5669 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1407289 (1.4 MB) TX bytes:372566 (372.5 KB) Interrupt:49 Base address:0xa000 eth1 Link encap:Ethernet HWaddr 00:e0:4c:53:44:58 inet6 addr: fe80::2e0:4cff:fe53:4458/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9230 errors:0 dropped:0 overruns:0 frame:0 TX packets:9230 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:557648 (557.6 KB) TX bytes:557648 (557.6 KB) wlan0 Link encap:Ethernet HWaddr cc:52:af:5e:78:05 inet addr:192.168.1.65 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::ce52:afff:fe5e:7805/64 Scope:LinkU UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:17389 errors:0 dropped:0 overruns:0 frame:0 TX packets:12231 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:22452248 (22.4 MB) TX bytes:1502750 (1.5 MB) If I unplug the USB LAN card which Ubuntu has detected, then Ubuntu will detect a USB LAN card from the remaining plugged adapters, and process go on untill I plug all the USB LAN adapters. Looking for some urgent help. Thanks

    Read the article

  • OEG11gR2 integration with OES11gR2 Authorization with condition

    - by pgoutin
    Introduction This OES use-case has been defined originally by Subbu Devulapalli (http://accessmanagement.wordpress.com/).  Based on this OES museum use-case, I have developed the OEG11gR2 policy able to deal with the OES authorization with condition. From an OEG point of view, the way to deal with OES condition is to provide with the OES request some Environmental / Context Attributes.   Museum Use-Case  All painting in the museum have security sensors, an alarm goes off when a person comes too close a painting. The employee designated for maintenance needs to use their ID and disable the alarm before maintenance. You are the Security Administrator for the museum and you have been tasked with creating authorization policies to manage authorization for different paintings. Your first task is to understand how paintings are organized. Asking around, you are surprised to see that there isno formal process in place, so you need to start from scratch. the museum tracks the following attributes for each painting 1. Name of the work 2. Painter 3. Condition (good/poor) 4. Cost You compile the list of paintings  Name of Painting  Painter  Paint Condition  Cost  Mona Lisa  Leonardo da Vinci  Good  100  Magi  Leonardo da Vinci  Poor  40  Starry Night  Vincent Van Gogh  Poor  75  Still Life  Vincent Van Gogh  Good  25 Being a software geek who doesn’t (yet) understand art, you feel that price(or insurance price) of a painting is the most important criteria. So you feel that based on years-of-experience employees can be tasked with maintaining different paintings. You decide that paintings worth over 50 cost should be only handled by employees with over 20 years of experience and employees with less than 10 years of experience should not handle any painting. Lets us start with policy modeling. All paintings have a common set of attributes and actions, so it will be good to have them under a single Resource Type. Based on this resource type we will create the actual resources. So our high level model is: 1) Resource Type: Painting which has action manage and the following four attributes a) Name of the work b) Painter c) Condition (good/poor) d) Cost 2) To keep things simple lets use painting name for Resource name (in real world you will try to use some identifier which is unique, because in future we may end up with more than one painting which has the same name.) 3) Create Resources based on the previous table 4) Create an identity attribute Experience (Integer) 5) Create the following authorization policies a) Allow employees with over 20 years experience to access all paintings b) Allow employees with 10 – 20 years of experience to access painting which cost less than 50 c) Deny access to all paintings for employees with less than 10 year of experience OES Authorization Configuration We do need to create 2 authorization policies with specific conditions a) Allow employees with over 20 years experience to access all paintings b) Allow employees with 10 – 20 years of experience to access painting which cost less than 50 c) Deny access to all paintings for employees with less than 10 year of experience We don’t need an explicit policy for Deny access to all paintings for employees with less than 10 year of experience, because Oracle Entitlements Server will automatically deny if there is no matching policy. OEG Policy The OEG policy looks like the following The 11g Authorization filter configuration is similar to :  The ${PAINTING_NAME} and ${USER_EXPERIENCE} variables are initialized by the "Retrieve from the HTTP header" filters for testing purpose. That's to say, under Service Explorer, we need to provide 2 attributes "Experience" & "Painting" following the OES 11g Authorization filter described above.

    Read the article

  • #OOW 2012: Big Data and The Social Revolution

    - by Eric Bezille
    As what was saying Cognizant CSO Malcolm Frank about the "Futur of Work", and how the Business should prepare in the face of the new generation  not only of devices and "internet of things" but also due to their users ("The Millennials"), moving from "consumers" to "prosumers" :  we are at a turning point today which is bringing us to the next IT Architecture Wave. So this is no more just about putting Big Data, Social Networks and Customer Experience (CxM) on top of old existing processes, it is about embracing the next curve, by identifying what processes need to be improve, but also and more importantly what processes are obsolete and need to be get ride of, and new processes put in place. It is about managing both the hierarchical and structured Enterprise and its social connections and influencers inside and outside of the Enterprise. And this does apply everywhere, up to the Utilities and Smart Grids, where it is no more just about delivering (faster) the same old 300 reports that have grown over time with those new technologies but to understand what need to be looked at, in real-time, down to an hand full relevant reports with the KPI relevant to the business. It is about how IT can anticipate the next wave, and is able to answers Business questions, and give those capabilities in real-time right at the hand of the decision makers... This is the turning curve, where IT is really moving from the past decade "Cost Center" to "Value for the Business", as Corporate Stakeholders will be able to touch the value directly at the tip of their fingers. It is all about making Data Driven Strategic decisions, encompassed and enriched by ALL the Data, and connected to customers/prosumers influencers. This brings to stakeholders the ability to make informed decisions on question like : “What would be the best Olympic Gold winner to represent my automotive brand ?”... in a few clicks and in real-time, based on social media analysis (twitter, Facebook, Google+...) and connections link to my Enterprise data. A true example demonstrated by Larry Ellison in real-time during his yesterday’s key notes, where “Hardware and Software Engineered to Work Together” is not only about extreme performances but also solutions that Business can touch thanks to well integrated Customer eXperience Management and Social Networking : bringing the capabilities to IT to move to the IT Architecture Next wave. An example, illustrated also todays in 2 others sessions, that I had the opportunity to attend. The first session bringing the “Internet of Things” in Oil&Gaz into actionable decisions thanks to Complex Event Processing capturing sensors data with the ready to run IT infrastructure leveraging Exalogic for the CEP side, Exadata for the enrich datasets and Exalytics to provide the informed decision interface up to end-user. The second session showing Real Time Decision engine in action for ACCOR hotels, with Eric Wyttynck, VP eCommerce, and his Technical Director Pascal Massenet. I have to close my post here, as I have to go to run our practical hands-on lab, cooked with Olivier Canonge, Christophe Pauliat and Simon Coter, illustrating in practice the Oracle Infrastructure Private Cloud recently announced last Sunday by Larry, and developed through many examples this morning by John Folwer. John also announced today Solaris 11.1 with a range of network innovation and virtualization at the OS level, as well as many optimizations for applications, like for Oracle RAC, with the introduction of the lock manager inside Solaris Kernel. Last but not least, he introduced Xsigo Datacenter Fabric for highly simplified networks and storage virtualization for your Cloud Infrastructure. Hoping you will get ready to jump on the next wave, we are here to help...

    Read the article

  • RPi and Java Embedded GPIO: Sensor Reading using Java Code

    - by hinkmond
    And, now to program the Java code for reading the fancy-schmancy static electricity sensor connected to your Raspberry Pi, here is the source code we'll use: First, we need to initialize ourselves... /* * Java Embedded Raspberry Pi GPIO Input app */ package jerpigpioinput; import java.io.FileWriter; import java.io.RandomAccessFile; import java.text.DateFormat; import java.text.SimpleDateFormat; import java.util.Calendar; /** * * @author hinkmond */ public class JerpiGPIOInput { static final String GPIO_IN = "in"; // Add which GPIO ports to read here static String[] GpioChannels = { "7" }; /** * @param args the command line arguments */ public static void main(String[] args) { try { /*** Init GPIO port(s) for input ***/ // Open file handles to GPIO port unexport and export controls FileWriter unexportFile = new FileWriter("/sys/class/gpio/unexport"); FileWriter exportFile = new FileWriter("/sys/class/gpio/export"); for (String gpioChannel : GpioChannels) { System.out.println(gpioChannel); // Reset the port unexportFile.write(gpioChannel); unexportFile.flush(); // Set the port for use exportFile.write(gpioChannel); exportFile.flush(); // Open file handle to input/output direction control of port FileWriter directionFile = new FileWriter("/sys/class/gpio/gpio" + gpioChannel + "/direction"); // Set port for input directionFile.write(GPIO_IN); directionFile.flush(); } And, next we will open up a RandomAccessFile pointer to the GPIO port. /*** Read data from each GPIO port ***/ RandomAccessFile[] raf = new RandomAccessFile[GpioChannels.length]; int sleepPeriod = 10; final int MAXBUF = 256; byte[] inBytes = new byte[MAXBUF]; String inLine; int zeroCounter = 0; // Get current timestamp with Calendar() Calendar cal; DateFormat dateFormat = new SimpleDateFormat("yyyy/MM/dd HH:mm:ss.SSS"); String dateStr; // Open RandomAccessFile handle to each GPIO port for (int channum=0; channum Then, loop forever to read in the values to the console. // Loop forever while (true) { // Get current timestamp for latest event cal = Calendar.getInstance(); dateStr = dateFormat.format(cal.getTime()); // Use RandomAccessFile handle to read in GPIO port value for (int channum=0; channum Rinse, lather, and repeat... Compile this Java code on your host PC or Mac with javac from the JDK. Copy over the JAR or class file to your Raspberry Pi, "sudo -i" to become root, then start up this Java app in a shell on your RPi. That's it! You should see a "1" value get logged each time you bring a statically charged item (like a balloon you rub on the cat) near the antenna of the sensor. There you go. You've just seen how Java Embedded technology on the Raspberry Pi is an easy way to access sensors. Hinkmond

    Read the article

  • At the Java DEMOgrounds - Oracle Java ME Embedded Enables the “Internet of Things”

    - by Janice J. Heiss
    I caught up with Oracle’s Robert Barnes, Senior Director, Java Product Management, who was demonstrating a new product from Oracle’s Java Platform, Micro Edition (Java ME) product portfolio, Oracle Java ME Embedded 3.2, a complete client Java runtime optimized for microcontrollers and other resource-constrained devices. Oracle’s Java ME Embedded 3.2 is a Java ME runtime based on CLDC 1.1 (JSR-139) and IMP-NG (JSR-228).“What we are showing here is the Java ME Embedded 3.2 that we announced last week,” explained Barnes. “It’s the start of the 'Internet of Things,’ in which you have very very small devices that are on the edge of the network where the sensors sit. You often have a middle area called a gateway or a concentrator which is fairly middle to higher performance. On the back end you have a very high performance server. What this is showing is Java spanning all the way from the server side right down towards the type of chip that you will get at the sensor side as the network.” Barnes explained that he had two different demos running.The first, called the Solar Panel System Demo, measures the brightness of the light.  “This,” said Barnes, “is a light source demo with a Cortex M3 controlling the motor, on the end of which is a sensor which is measuring the brightness of the lamp. This is recording the data of the brightness of the lamp and as we move the lamp out of the way, we should be able using the server to turn the sensor towards the lamp so the brightness reading will go higher. This sends the message back to the server and we can look at the web server sitting on the PC underneath the desk. We can actually see the data being passed back effectively through a back office type of function within a utility environment.” The second demo, the Smart Grid Response Demo, Barnes explained, “has the same board and processor and is still using Java ME embedded with a different app on top. This is a demand response demo. What we are seeing within the managing environment is that people want to track the pricing signals of the electricity. If it’s particularly expensive at any point in time, they may turn something off. This demo sets the price of the electricity as though this is coming from the back of the server sending pricing signals to my home.” The demo had a lamp and a fan and it was tracking the price of electricity. “If I set the price of the electricity to go over 5 cents, then the device will turn off,” explained Barnes. “I can go into my settings and, in this case, change the price to 50 cents and we can wait a minus and the lamp will go off. When I change the pricing signal so that it is lower, the lamp will come back on. The key point is that the Java software we have running is the same across all the different devices; it’s a way to build applications across multiple devices using the same software. This is important because it fixes peak loading on the network and can stops blackouts.” This demo brought me back to a prior decade when Sun Microsystems first promoted  Jini technology, a version of Java that would put everything on the network and give us the smart home. Your home would be automated to tell you when you were out of milk, when to change your light bulbs, etc. You would have access to the web and the network throughout your home.It’s interesting to see how technology moves over time – from the smart home to the Internet of Things.

    Read the article

  • RPi and Java Embedded GPIO: Big Data and Java Technology

    - by hinkmond
    Java Embedded and Big Data go hand-in-hand, especially as demonstrated by prototyping on a Raspberry Pi to show how well the Java Embedded platform can perform on a small embedded device which then becomes the proof-of-concept for industrial controllers, medical equipment, networking gear or any type of sensor-connected device generating large amounts of data. The key is a fast and reliable way to access that data using Java technology. In the previous blog posts you've seen the integration of a static electricity sensor and the Raspberry Pi through the GPIO port, then accessing that data through Java Embedded code. It's important to point out how this works and why it works well with Java code. First, the version of Linux (Debian Wheezy/Raspian) that is found on the RPi has a very convenient way to access the GPIO ports through the use of Linux OS managed file handles. This is key in avoiding terrible and complex coding using register manipulation in C code, or having to program in a less elegant and clumsy procedural scripting language such as python. Instead, using Java Embedded, allows a fast way to access those GPIO ports through those same Linux file handles. Java already has a very easy to program way to access file handles with a high degree of performance that matches direct access of those file handles with the Linux OS. Using the Java API java.io.FileWriter lets us open the same file handles that the Linux OS has for accessing the GPIO ports. Then, by first resetting the ports using the unexport and export file handles, we can initialize them for easy use in a Java app. // Open file handles to GPIO port unexport and export controls FileWriter unexportFile = new FileWriter("/sys/class/gpio/unexport"); FileWriter exportFile = new FileWriter("/sys/class/gpio/export"); ... // Reset the port unexportFile.write(gpioChannel); unexportFile.flush(); // Set the port for use exportFile.write(gpioChannel); exportFile.flush(); Then, another set of file handles can be used by the Java app to control the direction of the GPIO port by writing either "in" or "out" to the direction file handle. // Open file handle to input/output direction control of port FileWriter directionFile = new FileWriter("/sys/class/gpio/gpio" + gpioChannel + "/direction"); // Set port for input directionFile.write("in"); // Or, use "out" for output directionFile.flush(); And, finally, a RandomAccessFile handle can be used with a high degree of performance on par with native C code (only milliseconds to read in data and write out data) with low overhead (unlike python) to manipulate the data going in and out on the GPIO port, while the object-oriented nature of Java programming allows for an easy way to construct complex analytic software around that data access functionality to the external world. RandomAccessFile[] raf = new RandomAccessFile[GpioChannels.length]; ... // Reset file seek pointer to read latest value of GPIO port raf[channum].seek(0); raf[channum].read(inBytes); inLine = new String(inBytes); It's Big Data from sensors and industrial/medical/networking equipment meeting complex analytical software on a small constraint device (like a Linux/ARM RPi) where Java Embedded allows you to shine as an Embedded Device Software Designer. Hinkmond

    Read the article

  • Using Mapping Models to migrate between Core Data Object Models

    - by westsider
    I have a fairly simply scheme. Essentially, Run <-- Data (where a Run holds a data, e.g., Temperature, sampled from some sort of sensor). Now, it seems that sensors can have more than one measurement (e.g., Temperature and Humidity). So, a single Run could have multiple data samples. Hence, Run <-- Sample and Sample <-- Data. (And for simplicity I am leaving Run <-- Data in place, for now.) If I create a new mapping model, then things generally work - except that no new Samples are created, no relationships are established between Runs and Samples nor between Samples and Datas. I am trying to get mapping model to migrate my model but even the slightest change to the generated mapping model results in Cocoa error 134110. For example, if I take the "Sample" mapping (which has no Source) and set its Source to 'Run' (so that I can set Sample's inverse relationship 'run' appropriately) then the mapping changes its name to "RunToSample". There are two relationships handled in this mapping: data and run. The data property gets set automatically to FUNCTION($manager, "destinationInstancesForEntityMappingNamed:sourceInstances:" , "DataToData", $source.dataSet) Following this example, I set the run property to FUNCTION($manager, "destinationInstancesForEntityMappingNamed:sourceInstances:" , "RunToRun", $source) Similarly, I set the 'sample' property mapping in RunToRun to FUNCTION($manager, "destinationInstancesForEntityMappingNamed:sourceInstances:" , "RunToSample", $source) and the 'sample' property in DataToData to FUNCTION($manager, "destinationInstancesForEntityMappingNamed:sourceInstances:" , "RunToSample", $source.run) So, what, I wonder, is going wrong? I have tried various permutations, such as leaving the 'inverse' relationships unspecified. But I continue to get the same error (134110) regardless. I imagine that this is a lot easier than it seems and that I am missing some fundamental but minor piece. I have also tried subclassing NSEntityMigrationPolicy and overriding -createDestinationInstancesForSourceInstance: but these efforts have met with much the same results. Thanks in advance for any pointers or (relevant :-) advice.

    Read the article

  • Using Hidden Markov Model for designing AI mp3 player

    - by Casper Slynge
    Hey guys. Im working on an assignment, where I want to design an AI for a mp3 player. The AI must be trained and designed with the use of a HMM method. The mp3 player shall have the functionality of adapting to its user, by analyzing incoming biological sensor data, and from this data the mp3 player will choose a genre for the next song. Given in the assignment is 14 samples of data: One sample consist of Heart Rate, Respiration, Skin Conductivity, Activity and finally the output genre. Below is the 14 samples of data, just for you to get an impression of what im talking about. Sample HR RSP SC Activity Genre S1 Medium Low High Low Rock S2 High Low Medium High Rock S3 High High Medium Low Classic S4 High Medium Low Medium Classic S5 Medium Medium Low Low Classic S6 Medium Low High High Rock S7 Medium High Medium Low Classic S8 High Medium High Low Rock S9 High High Low Low Classic S10 Medium Medium Medium Low Classic S11 Medium Medium High High Rock S12 Low Medium Medium High Classic S13 Medium High Low Low Classic S14 High Low Medium High Rock My time of work regarding HMM is quite low, so my question to you is if I got the right angle on the assignment. I have three different states for each sensor: Low, Medium, High. Two observations/output symbols: Rock, Classic In my own opinion I see my start probabilities as the weightened factors for either a Low, Medium or High state in the Heart Rate. So the ideal solution for the AI is that it will learn these 14 sets of samples. And when a users sensor input is received, the AI will compare the combination of states for all four sensors, with the already memorized samples. If there exist a matching combination, the AI will choose the genre, and if not it will choose a genre according to the weightened transition probabilities, while simultaniously updating the transition probabilities with the new data. Is this a right approach to take, or am I missing something ? Is there another way to determine the output probability (read about Maximum likelihood estimation by EM, but dont understand the concept)? Best regards, Casper

    Read the article

  • When software problems reported are not really software problems

    - by AndyUK
    Hi Apologies if this has already been covered or you think it really belongs on wiki. I am a software developer at a company that manufactures microarray printing machines for the biosciences industry. I am primarily involved in interfacing with various bits of hardware (pneumatics, hydraulics, stepper motors, sensors etc) via GUI development in C++ to aspirate and print samples onto microarray slides. On joining the company I noticed that whenever there was a hardware-related problem this would cause the whole setup to freeze, with nobody being any the wiser as to what the specific problem was - hardware / software / misuse etc. Since then I have improved things somewhat by introducing software timeouts and exception handling to better identify and deal with any hardware-related problems that arise eg PLC commands not successfully completed, inappropriate FPGA response commands, and various other deadlock type conditions etc. In addition, the software will now log a summary of the specific problem, inform the user and exit the thread gracefully. This software is not embedded, just interfacing using serial ports. In spite of what has been achieved, non-software guys still do not fully appreciate that in these cases, the 'software' problem they are reporting to me is not really a software problem, rather the software is reporting a problem, but not causing it. Don't get me wrong, there is nothing I enjoy more than to come down on software bugs like a ton of bricks, and looking at ways of improving robustness in any way. I know the system well enough now that I almost have a sixth sense for these things. No matter how many times I try to explain this point to people, it does not really penetrate. They still report what are essentially hardware problems (which eventually get fixed) as software ones. I would like to hear from any others that have endured similar finger-pointing experiences and what methods they used to deal with them.

    Read the article

  • Android Compass orientation on unreliable (Low pass filter)

    - by madsleejensen
    Hi all Im creating an application where i need to position a ImageView depending on the Orientation of the device. I use the values from a MagneticField and Accelerometer Sensors to calculate the device orientation with SensorManager.getRotationMatrix(rotationMatrix, null, accelerometerValues, magneticFieldValues) SensorManager.getOrientation(rotationMatrix, values); double degrees = Math.toDegrees(values[0]); My problem is that the positioning of the ImageView is very sensitive to changes in the orientation. Making the imageview constantly jumping around the screen. (because the degrees change) I read that this can be because my device is close to things that can affect the magneticfield readings. But this is not the only reason it seems. I tried downloading some applications and found that the "3D compass" application remains extremely steady in its readings, i would like the same behavior in my application. I read that i can tweak the "noise" of my readings by adding a "Low pass filter", but i have no idea how to implement this (because of my lack of Math). Im hoping someone can help me creating a more steady reading on my device, Where a little movement to the device wont affect the current orientation. Right now i do a small if (Math.abs(lastReadingDegrees - newReadingDegrees) > 1) { updatePosition() } To filter abit of the noise. But its not working very well :)

    Read the article

  • MySql: Query multiple identical dynamic tables.

    - by JYelton
    I have a database with 500+ tables, each with identical structure, that contain historical data from sensors. I am trying to come up with a query that will locate, for example, all instances where sensor n exceeds x. The problem is that the tables are dynamic, the query must be able to dynamically obtain the list of tables. I can query information_schema.tables to get a list of the tables, like so: SELECT table_name FROM information_schema.tables WHERE table_schema = 'database_name'; I can use this to create a loop in the program and then query the database repeatedly, however it seems like there should be a way to have MySql do the multiple table search. I have not been able to make a stored procedure that works, but the examples I can find are generally for searching for a string in any column. I want to specifically find data in a specific column that exists in all tables. I admit I do not understand how to properly use stored procedures nor if they are the appropriate solution to this problem. An example query inside the loop would be: SELECT device_name, sensor_value FROM device_table WHERE sensor_value > 10; Trying the following does not work: SELECT device_name, sensor_value FROM ( SELECT table_name FROM information_schema.tables WHERE table_schema = 'database_name' ) WHERE sensor_value > 10; It results in an error: "Every derived table must have its own alias." The goal is to have a list of all devices that have had a given sensor value occur anywhere in their log (table). Ultimately, should I just loop in my program once I've obtained a list of tables, or is there a query structure that would be more efficient?

    Read the article

  • Bitwise operators and converting an int to 2 bytes and back again.

    - by aKiwi
    first time user, Hi guys! So hopefully someone can help.. My background is php so entering the word of lowend stuff like, char is bytes, which are bits.. which is binary values.. etc is taking some time to get the hang of ;) What im trying to do here is sent some values from an Ardunio board to openFrameWorks (both are c++). What this script currently does (and works well for one sensor i might add) when asked for the data to be sent is.. int value_01 = analogRead(0); // which outputs between 0-1024 unsigned char val1; unsigned char val2; //some Complicated bitshift operation val1 = value_01 &0xFF; val2 = (value_01 >> 8) &0xFF; //send both bytes Serial.print(val1, BYTE); Serial.print(val2, BYTE); Apparently this is the most reliable way of getting the data across.. So now that it is send via serial port, the bytes are added to a char string and converted back by.. int num = ( (unsigned char)bytesReadString[1] << 8 | (unsigned char)bytesReadString[0] ); So to recap, im trying to get 4 sensors worth of data (which im assuming will be 8 of those serialprints?) and to have int num_01 - num_04... at the end of it all. Im assuming this (as with most things) might be quite easy for someone with experience in these concepts.. Any help would be greatly appreciated. Thanks

    Read the article

< Previous Page | 5 6 7 8 9 10 11  | Next Page >