Search Results

Search found 9122 results on 365 pages for 'sound card'.

Page 9/365 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• Sound and Video Skips on Ubuntu 11.10 64 bit

  - by Timothy LaFontaine

  I preformed a dist-upgrade from 11.04 to 11.10 and now I can not listen to any music or sounds (log on sound included), nor watch video without it stopping and then catching up and stopping again (This is flash or .mp4 through VLC). I did not have this issue with 11.04 and have even just preformed a fresh install of my system. I have tried to reinstall Pulse Audio and removing the .pulse folder but to no avail. Any help would be appreciated.

  Read the article

• how to record sound via headphone in audacity

  - by agha rehan abbas

  i have tried recording sound via headphone but i cant get it done not only that but while using skype my voice is not audible to the person whom i am talking but i can hear his voice i think it is the issue of some simple settings so can any one help me to get it done i have connected my headphone into my pc but i cant see it in the list of recordable devices have a look at it is this an issue of incompatible headphones ?

  Read the article

• HDMI sound gone, can't figure out how to turn it back on

  - by Oli

  I have had an Acer Revo box as a media centre for a while. I recently installed Ubuntu Server (10.10) on it and polished it up with nodm (one of the most simple ways to launch an X session) and installed boxee. It's been working fine for over a month. It's just running ALSA. I've had problems with PulseAudio/Boxee/HDMI before so I wanted to keep it simple. And that worked. It pushed both PCM and digital (AAC and various Dolby codecs) over HDMI perfectly. But I restarted it the other day after mucking around with some nfs configuration and now there isn't any sound. The hardware is an ION chipset. Nvidia 9400M graphics with Nvidia MCP79/7A audio. One thing I have noticed is there doesn't appear to be any sign of a IEC958 device. A traditional fix in the past for fresh installs has been to load alsamixer, find the IEC device and toggle its mute but I can't. I'm certain this used to represent the HDMI output. It just doesn't seem to exist any more unless I run sudo alsa-utils restart while boxee is running, when I see it in an error message: * Shutting down ALSA... [ OK ] * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1388: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... ...done. When nodm (and thus boxee) aren't running, I don't see this error but alsamixer still doesn't show the IEC channel. aplay -l gives: card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0 Its section in lshw reads: *-multimedia description: Audio device product: MCP79 High Definition Audio vendor: nVidia Corporation physical id: 8 bus info: pci@0000:00:08.0 version: b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2 resources: irq:22 memory:fae78000-fae7bfff I was running on the stock PAE kernel but now it's running on 2.6.37.1. I upgraded to see if that fixed things; it didn't. I'm considering a reinstall but I hate doing that because a) there's a bit of custom configuration in getting X and Boxee to start on boot and b) I don't know what the problem is. If I reinstall this time, I'll end up doing that every time the sound breaks. I love Ubuntu but I don't want to install it once a month. Is there any way to forcibly reset all alsa settings and restart from scratch (without doing a reinstall)? Any other tips? If you need more information, just ask.

  Read the article

• Automatically change Sound Input Output device

  - by Senthil Kumaran

  I have to plugin my USB Audio adapter ( 4300054 Gigawire USB Audio Adapter) for audio input because has a combo-input-output port for voice. After I do this, I have go open Sound Settings and manually select the USB Audio adapter for Input and Output, if I do not, the system default remains selected. Is there anyway, I can make Ubuntu to automatically select the USB Audio Adapter as the default as soon as I plug-in?

  Read the article

• Sound works but cannot change settings or volume

  - by W. Conrad Walden

  Volume is always on max. The volume indicator is showing three dashes and does not show anything when I click on it. Clicking the "sound" button in settings causes it to recursively reopen settings. pulseaudio --start doesn't help. EDIT: This has only started happening after the upgrade to 13.10 EDIT 2: This is in Unity, yes. EDIT 3: killall unity-panel-service works and does reload the panels, but previous problems persist.

  Read the article

• No Speaker sound on HP ProBook 6550b

  - by tUTe

  I have this problems since always, but never care, today i want to use only ubuntu, no more windows, so i installed ubuntu 14.04 and the speakers does not work (work fine on windows until yesterday) but the headphones jack works properly I try to check alsamixer, and everything is in 100, but if i check the sound devices only show me the headphones I do this link and does not work too, and i don't know what else i do

  Read the article

• Ubuntu 12.04 Sound only comes in Headphones doesn't come in Inbuilt Speakers - HP Pavilion dv6 1280us

  - by linuxfreak12

  I am newbie of Ubuntu 12.04 with Gnome3 Shell. Laptop Model: HP Pavilion DV6 1280US Full Updates Installed. I can hear sound played only when headphones are plugged in. Regular inbuilt speakers doesn't work. Speakers are fine, it should be some technical configuration/driver issue with OS. They work in the Windows OS in the same laptop. Kindly check these two snapshots: Ubuntu Geeks Kindly help me!

  Read the article

• Record 8 separate Line IN Channels from M-Audio Delta 1010 Card

  - by Peter Hoffmann

  I want to record the 8 separate Line IN Channels from my M-Audio Delta 1010 Card. The card is recogniced nicely and a can record a single channel via arecord -d 10 -f cd -t wav -D channel1 out2.wav. I've set up the different channels in ~/.asoundrc. Now if I want to record a second channel in parallel (arecord -d 10 -f cd -t wav -D channel2 out2.wav) I get the error arecord: main:564: audio open error: Device or resource busy As I understand the delta 1010 is a single Access Card, so only one application can access it at a time. Is this correct? The next step was to configure a dual channel input in .asoundrc # envy24 channel 1+2 only pcm.test { type plug ttable.0.0 1 ttable.0.1 1 slave.pcm ice1712 } Which works ok when I do a arecord -d 10 -f cd -t wav -D test -c 2 out.wav (BTW can anyone point me to a tool to split a multi channel wav into a file per channel?) But when I want to record the channels separately with (-I option) arecord -d 10 -f cd -t wav -D test -c 2 -I channel1.wav channel2.wav I get no recordings. Did I miss something with the configuration or what are my options to record all 8 channels via arecord. I've no experience with jackd. Is it an option to install jackd and record the line ins via jackd?

  Read the article

• SD card won't appear after upgrade to 13.10

  - by Pixel

  My SD card won't mount when I put it into my lap top, everything was fine before the upgrade. The information about the SD card appears just fine when I type "sudo fdisk l " it just says that it doesn't have a valid partition table. When I type "_sudo blkid" I get the following answer: /dev/sda1: UUID="CCA8-9030" TYPE="vfat" /dev/sda2: UUID="8a1d135b-384b-432d-b608-64dcf09ada24" TYPE="ext2" /dev/sda3: UUID="7s6PtU-kj2Z-N8XD-0mzl-840i-i3HG-enlbAf" TYPE="LVM2_member" /dev/sr0: LABEL="Bamboo CD" TYPE="iso9660" /dev/mapper/ubuntu--vg-root: UUID="c9b521c8-7c9f-493b-95c8-a7d79c465318" TYPE="ext4" /dev/mapper/ubuntu--vg-swap_1: UUID="7f155ab6-e1b9-485b-a2bc-443c0622284d" TYPE="swap" When I use lsusb: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 13d3:5710 IMC Networks UVC VGA Webcam Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I've read the other threads and I couldn't really find any good answers, my card reader was compatible with the previous version of ubuntu, so technically it should still be compatible with the next version. Also I can't erase what's on the card, it contains important data which I need... :/ If you need anymore information just ask, I'll give it as soon as I can. Pixel.

  Read the article

• 5.1 surround sound on Acer Aspire 5738ZG with Ubuntu 11.10

  - by kbargais_LV

  I got a problem with sound. I tried everything but no results. :( I got 3 sound ports. my daemon: # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0

  Read the article

• Phillips SAA7139 TV tuner card not working

  - by Gaurav Butola

  When I had windows 7 installed on my computer, My TV tuner card used to work fine after installing the drivers but on ubuntu it is not working. I have tried several Softwares to get it working but none helped. Today I installed Me Tv and when I open it, I get an error saying "There are no DVB devices available". What can I do to get my Philips TV Tuner card working. I have a PCI card and here is the output of lspi command 04:00.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)

  Read the article

• How can I make QSSTV recognise my sound device

  - by hellocatfood

  After reading this article from Instructables I wanted to try it out in Ubuntu. Luckily QSSTV is available but I'm having problems getting it to work properly. When pressing the green light (to receive data) I get this error: After going to Options Configure Interfaces I discovered that it's attempting to use /dev/dsp which doesn't appear to exist. In my /dev folder there are no files that reference sound devices and I've tried all of the devices in /dev/snd but unfortunately none of them work. Is there a specific audio device that I should be linking to?

  Read the article

• Pulseaudio no sound card detected. Dummy output only

  - by Zach Smith

  I'm using 12.10 Quantal with Openbox and a .xinitrc script at login instead of a display manager. Its a relatively fresh install and I noticed when I opened pavucontrol the only output was a dummy one. I check around and it appears that my soundcard is physically installed but Pulseaudio isn't detecting it. I'm really unsure what I should do but any help getting my audio back would be appreciated. Edit: further info if its at all useful: dante@dante-ubuntu:~$ uname -a && aplay -l && cat /proc/asound/version && head -n 1 /proc/asound/card*/codec#* Linux dante-ubuntu 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux aplay: device_list:252: no soundcards found... Advanced Linux Sound Architecture Driver Version 1.0.25. == /proc/asound/card0/codec#0 <== Codec: ATI R6xx HDMI == /proc/asound/card1/codec#0 <== Codec: IDT 92HD81B1X5

  Read the article

• no sound in flash 11.10

  - by Amey Jah

  I am on 11.10 64bit. I have installed flash from http://get.adobe.com/flashplayer/otherversions/. I had downloaded install_flash_player_11_linux.x86_64.tar.gz and move libflashplayer.so to ~/.mozilla and ~/.mozilla/plugins I also have OSS installed because alsa does not work for me. I generally follow steps mentioned at https://help.ubuntu.com/community/OpenSound and everything works fine. But for 11.10, flash has got no sound. I am not sure if that is OSS problem. Could you please help me.

  Read the article

• Sound not working for uid=1003 but working fine for uid=1000

  - by Dirk Eddelbuettel

  Sounds works for uid=1000, but not for the main user on the system, running with uid=1003. Upon boot, the Ubuntu chime clearly plays. When the user is logged in, sound test shows no input device. I looked at several of the previous questions, added the user to audio, video, pulse, pulse-access --- but still no luck. To recap: This worked perfectly in 11.04, 11.10, 12.04. It works for the default user uid=1000, it does not work for the actual user. The differing group memberships are mainly for adm, admin, sudo and the like.

  Read the article

• Rendering scaled-down card images

  - by user1065145

  I have high-quality SVG card images, but they drastically lose their quality when I downsize them. I have tried two ways of rendering cards (using Inkscape and Imagemagics): 1) Render SVG to high-res PNG and resize it then: inkscape -D --export-png=QS1024.png --export-width=1024 QS.svg convert QS1024.png -filter Lanczos -sampling-factor 1x1 -resize 71x QS71.png 2) Render SVG to image of proper size at once: inkscape -D --export-png=QS71.png --export-width=71 QS.svg Both approaches generate blurry card images, which looks even worse than old Windows cards. What are the best way to generate smaller card images from SVG sources and not to loose their quality a lot? UPDATE: I am using Inkscape to render SVG - PNG and ImageMagick then to downsize PNG. I've tried using convert -resize with couple of filters (Lanczos/Mitchell/etc), but result was pretty much the same. Original: 71x raster:

  Read the article

• Stream sound card output to icecast2 via darkice

  - by Alberto Burgos

  I want to stream to icecast server via darkice, the default .cfg comes with /dev/dsp, witch is OSS, but there is no /dev/dsp in Ubuntu 12.10, so I tried hw:0,0, but it's just the microphone, and I would like to stream all of the sound-card output. Any ideas? cat /proc/asound/cards 0 [SB ]: HDA-Intel - HDA ATI SB HDA ATI SB at 0xf8700000 irq 16 cat /proc/asound/devices 1: : sequencer 2: [ 0- 0]: digital audio playback 3: [ 0- 0]: digital audio capture 4: [ 0- 0]: hardware dependent 5: [ 0] : control 33: : timer I tried following this post: How can I stream my soundcard output?

  Read the article

• missing sound-volume-applet

  - by psipi

  I am using ubuntu 12.10. I had some problems with my skype and audio. So I did the following and it's working fine now: sudo apt-get purge pulseaudio sudo apt-get autoremove sudo reboot After this I reinstalled pulseaudio via sudo apt-get install pulseaudio But now my icon in the gnome-panel is missing. After searching on google I found that that the sound-volume-applet ist missing. So is this right? And do you get the icon in the panel?

  Read the article

• 12.04 sound keeps auto-muting when idle

  - by fali

  I just installed 12.04 on an HP8510W. Everything works fine except for one weird behavior which I have noticed. When ever there is no audio playing, the audio mute indicator on the laptop is on. As soon as I start playing a you tube video the mute indicator turns off and I get sound. Here is my pulse audio output which says that the sink is suspended because it is idle: Welcome to PulseAudio! Use "help" for usage information. list-sinks 1 sink(s) available. index: 0 name: <alsa_output.pci-0000_00_1b.0.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE I tried running alsamixer, but I don't see the auto-mute option.

  Read the article

• CS4326/7 sound chipset on Thinkpad 600E

  - by user7120

  OK, I know this has been a problem for a while, and I know by now this really old Pentium II laptop is really really really obsolete. However, I have installed Lubuntu 10.10 on this laptop and things seem to work fine except the sound. Now I've read and gone through a bunch of tutorials and guides to working around this, none of which have worked. I have gone through this Ubuntu bug report and that doesn't work either. The problem I think is that the latest workaround is (understandably) about two Ubuntu versions behind. Now I'm not sure what has changed since then to make that workaround not work, but I would appreciate any help. Thanks

  Read the article

• Sound issue in Lubuntu

  - by jvsa90

  I'm recently having a problem in my Lubuntu deskptop: sound through the speakers doesn't seem to work. The funny thing is: it works when I plug in my earphones. I've tried to unmute everything with pavucontrol and alsamixer, but everything seems to be OK. $ sudo aplay -l **** Liste der Hardware-Geräte (PLAYBACK) **** Karte 0: Intel [HDA Intel], Gerät 0: HDA Generic [HDA Generic] Sub-Geräte: 0/1 Sub-Gerät #0: subdevice #0 $ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: Acer Incorporated [ALI] Device 034a Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 58200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel Can anyone guess what's happening? It has worked until recently and it definitely works in my Windows partition.

  Read the article

• No startup sound

  - by Laci Bacsi

  Despite numerous attempt, and advise, this is what I applied. sudo cp /usr/share/sounds/ubuntu/stereo/* /usr/share/sounds/ Type this: cd /dev ls -l |less find 14, [0-...] This file for audio you can type cat /etc/passwc >/dev/dsp dsp if speaker device This is not a big deal but I'm an OCD person, so I would like that it works. An other issue is the screensaver, I can not watch movies. I understand that Ubuntu default settings are "Turned off start up sound, and 10 min screensaver auto" If I would be allowed to a suggestions, it is the followings: Is that so problematic to create a check box to check or un check this futures, just to be able to enjoy your product fully? Furthermore I'm reading a lot of similar issues on blogs... Annoying

  Read the article

• No sound after updating from 11.10 to 12.04

  - by shaneo

  Hi I updated a friends computer from 11.10 to 12.04 and the sound stopped working in the built-in speakers. The computer is a Sony Vaio PCG-2J1L. I tried using the guide found here: https://help.ubuntu.com/community/HdaIntelSoundHowto and still no luck. $cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC889 $cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC889 Analog name: ALC889 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 1 cat /proc/asound/card0/codec* output can be found here http://paste.ubuntu.com/1043188/ If anymore information is needed just let me know and ill post it here. Thank you in advance for any help with this issue.

  Read the article

• No sound/audio after resuming from sleep

  - by hansvonaachen

  I've made a fresh UEFI install of Ubuntu 13.10 (64 bit) on a Lenovo Ideapad Z510 laptop with Intel i5 4200M processor. Ubuntu is the only OS installed on the computer, secure boot disabled. Everythings works fine (backlight issue fixed after editing rc.local file), the only minor trouble I have is resuming the laptop from "sleep" mode. If I close the lid and then wake the laptop opening it again, there is no audio/sound. I need to restart the computer (not even logging out helps). If I suspend the computer in a graphical way (not closing the lid): gearwheel in top right of the screen -- suspend and wake it up/turning on, audio works with no issues. Ideas how to fix this? Thanks!

  Read the article

• No sound in World of Goo?

  - by user37805

  I installed WorldOfGooSetup.1.41.deb and it didn't work. There was a segmentation fault error (core dumped) in terminal. I fixed that with: sudo cp /usr/lib/x86_64-linux-gnu/libvorbis.so.* /opt/WorldOfGoo/libs32 sudo cp /usr/lib/x86_64-linux-gnu/libvorbis.so.* /opt/WorldOfGoo/libs64 That error is new for me as I have never had it before with previous releases of Ubuntu. The game starts now but no sound effects or music is played. I can hear music with my computer, videos, etc, so it is not a volume control problem. I am using ubuntu 12.04 final release.

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >