Search Results

Search found 940 results on 38 pages for 'st'.

Page 9/38 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• Why is FLD1 loading NaN instead?

  - by Bernd Jendrissek

  I have a one-liner C function that is just return value * pow(1.+rate, -delay); - it discounts a future value to a present value. The interesting part of the disassembly is 0x080555b9 : neg %eax 0x080555bb : push %eax 0x080555bc : fildl (%esp) 0x080555bf : lea 0x4(%esp),%esp 0x080555c3 : fldl 0xfffffff0(%ebp) 0x080555c6 : fld1 0x080555c8 : faddp %st,%st(1) 0x080555ca : fxch %st(1) 0x080555cc : fstpl 0x8(%esp) 0x080555d0 : fstpl (%esp) 0x080555d3 : call 0x8051ce0 0x080555d8 : fmull 0xfffffff8(%ebp) While single-stepping through this function, gdb says (rate is 0.02, delay is 2; you can see them on the stack): (gdb) si 0x080555c6 30 return value * pow(1.+rate, -delay); (gdb) info float R7: Valid 0x4004a6c28f5c28f5c000 +41.68999999999999773 R6: Valid 0x4004e15c28f5c28f6000 +56.34000000000000341 R5: Valid 0x4004dceb851eb851e800 +55.22999999999999687 R4: Valid 0xc0008000000000000000 -2 =R3: Valid 0x3ff9a3d70a3d70a3d800 +0.02000000000000000042 R2: Valid 0x4004ff147ae147ae1800 +63.77000000000000313 R1: Valid 0x4004e17ae147ae147800 +56.36999999999999744 R0: Valid 0x4004efb851eb851eb800 +59.92999999999999972 Status Word: 0x1861 IE PE SF TOP: 3 Control Word: 0x037f IM DM ZM OM UM PM PC: Extended Precision (64-bits) RC: Round to nearest Tag Word: 0x0000 Instruction Pointer: 0x73:0x080555c3 Operand Pointer: 0x7b:0xbff41d78 Opcode: 0xdd45 And after the fld1: (gdb) si 0x080555c8 30 return value * pow(1.+rate, -delay); (gdb) info float R7: Valid 0x4004a6c28f5c28f5c000 +41.68999999999999773 R6: Valid 0x4004e15c28f5c28f6000 +56.34000000000000341 R5: Valid 0x4004dceb851eb851e800 +55.22999999999999687 R4: Valid 0xc0008000000000000000 -2 R3: Valid 0x3ff9a3d70a3d70a3d800 +0.02000000000000000042 =R2: Special 0xffffc000000000000000 Real Indefinite (QNaN) R1: Valid 0x4004e17ae147ae147800 +56.36999999999999744 R0: Valid 0x4004efb851eb851eb800 +59.92999999999999972 Status Word: 0x1261 IE PE SF C1 TOP: 2 Control Word: 0x037f IM DM ZM OM UM PM PC: Extended Precision (64-bits) RC: Round to nearest Tag Word: 0x0020 Instruction Pointer: 0x73:0x080555c6 Operand Pointer: 0x7b:0xbff41d78 Opcode: 0xd9e8 After this, everything goes to hell. Things get grossly over or undervalued, so even if there were no other bugs in my freeciv AI attempt, it would choose all the wrong strategies. Like sending the whole army to the arctic. (Sigh, if only I were getting that far.) I must be missing something obvious, or getting blinded by something, because I can't believe that fld1 should ever possibly fail. Even less that it should fail only after a handful of passes through this function. On earlier passes the FPU correctly loads 1 into ST(0). The bytes at 0x080555c6 definitely encode fld1 - checked with x/... on the running process. What gives?

  Read the article

• How to draw two different possiblity of query tree for the example? in ddbms

  - by quin

  select topic from book b, share s, stall st where b.b#=s.b# and st.store#=s.store# Hi friends, i am trying to draw query tree i dont know how to draw query tree for above example. can you help me in that. thanks in advance

  Read the article

• How to initialise a struct-type in the initialisation list?

  - by M4design

  How can I initilise a structure in the constructor list? Say: struct St{int x, y}; class Foo { public: Foo(int a = 0, int b = 0) : /*here initilise st_foo out of a and b*/ {} private: const St st_foo; };

  Read the article

• BroadcastReciever doesn't show SMS not Send or Not delivered

  - by user1657111

  While using broadcastreciver for checking sms status, it shows the toast when sms is sent but shows nothing when sms is not sent or delivered (im testing it by putting an abrupt number). the code im using is the one ive seen the most on every site of checking sms delivery status. But my code is only showing the status when sms is sent successfully. Can any one get a hint of what am i doing wrong ? I hav this method in doInBackground() and so obviously im using AsyncTask. Thanks guys public void send_SMS(String list, String msg, AtaskClass task) { String SENT = "SMS_SENT"; String DELIVERED = "SMS_DELIVERED"; SmsManager sms = SmsManager.getDefault(); PendingIntent sentPI = PendingIntent.getBroadcast(this, 0, new Intent(SENT), 0); PendingIntent deliveredPI = PendingIntent.getBroadcast(this, 0, new Intent(DELIVERED), 0); //---when the SMS has been sent--- registerReceiver(new BroadcastReceiver(){ @Override public void onReceive(Context context, Intent arg1) { switch (getResultCode()) { case Activity.RESULT_OK: Toast.makeText(context, "SMS sent", Toast.LENGTH_SHORT).show(); break; case SmsManager.RESULT_ERROR_GENERIC_FAILURE: Toast.makeText(context, "Generic failure", Toast.LENGTH_SHORT).show(); break; case SmsManager.RESULT_ERROR_NO_SERVICE: Toast.makeText(context, "No service", Toast.LENGTH_SHORT).show(); break; case SmsManager.RESULT_ERROR_NULL_PDU: Toast.makeText(context, "Null PDU", Toast.LENGTH_SHORT).show(); break; case SmsManager.RESULT_ERROR_RADIO_OFF: Toast.makeText(context, "Radio off", Toast.LENGTH_SHORT).show(); break; } } }, new IntentFilter(SENT)); //---when the SMS has been delivered--- registerReceiver(new BroadcastReceiver(){ @Override public void onReceive(Context context, Intent arg1) { switch (getResultCode()) { case Activity.RESULT_OK: Toast.makeText(context, "SMS delivered", Toast.LENGTH_SHORT).show(); break; case Activity.RESULT_CANCELED: Toast.makeText(context, "SMS not delivered", Toast.LENGTH_SHORT).show(); break; } } }, new IntentFilter(DELIVERED)); StringTokenizer st = new StringTokenizer(list,","); int count= st.countTokens(); int i =1; count = 1; while(st.hasMoreElements()) { // PendingIntent pi = PendingIntent.getActivity(this,0,new Intent(this, SMS.class),0); String tempMobileNumber = (String)st.nextElement(); //SmsManager sms = SmsManager.getDefault(); sms.sendTextMessage(tempMobileNumber, null, msg , sentPI, deliveredPI); Double cCom = ((double)i/count) * 100; int j = cCom.intValue(); task.doProgress(j); i++; count ++; } // class ends }

  Read the article

• Where's my memory?! Nginx + PHP-FPM front end webserver slows to a crawl...

  - by incredimike

  I'm not sure if I have a problem with a memory leak (as my hosting company suggests), or if we both need to read http://linuxatemyram.com. Maybe you clever people can help us out? This is a front-end webserver VM running essentially only nginx & php-fpm on RHEL 5.5. This server is powering Magento, a PHP eCommerce thinggy. The server is running in a shared environment, but we're changing that soon. Anyway.. after a reboot the server runs just fine, but within a day it will grind itself into nothingness. Pages will take literally 2 minutes to load, CPU spikes like crazy, etc.. The console is even sluggish when I SSH in. It's like my whole server is being brought to its knees. I've also been monitoring the DB server via top and tcpdumping incoming traffic. The DB stays idle for a good portion of that "slow" load time. When i start seeing queries coming from the front-end server, the page loads soon afterward. Here are some stats after me logging in during a slow-down, after restarting php-fpm: [mike@front01 ~]$ free -m total used free shared buffers cached Mem: 5963 5217 745 0 192 314 -/+ buffers/cache: 4711 1252 Swap: 4047 4 4042 [mike@front01 ~]$ top top - 11:38:55 up 2 days, 1:01, 3 users, load average: 0.06, 0.17, 0.21 Tasks: 131 total, 1 running, 130 sleeping, 0 stopped, 0 zombie Cpu0 : 0.0%us, 0.3%sy, 0.0%ni, 99.3%id, 0.3%wa, 0.0%hi, 0.0%si, 0.0%st Cpu1 : 0.3%us, 0.0%sy, 0.0%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu2 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 6106800k total, 5361288k used, 745512k free, 199960k buffers Swap: 4144728k total, 4976k used, 4139752k free, 328480k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 31806 apache 15 0 601m 120m 37m S 0.0 2.0 0:22.23 php-fpm 31805 apache 15 0 549m 66m 31m S 0.0 1.1 0:14.54 php-fpm 31809 apache 16 0 547m 65m 32m S 0.0 1.1 0:12.84 php-fpm 32285 apache 15 0 546m 63m 33m S 0.0 1.1 0:09.22 php-fpm 32373 apache 15 0 546m 62m 32m S 0.0 1.1 0:09.66 php-fpm 31808 apache 16 0 543m 60m 35m S 0.0 1.0 0:18.93 php-fpm 31807 apache 16 0 533m 49m 30m S 0.0 0.8 0:08.93 php-fpm 32092 apache 15 0 535m 48m 27m S 0.0 0.8 0:06.67 php-fpm 4392 root 18 0 194m 10m 7184 S 0.0 0.2 0:06.96 cvd 4064 root 15 0 154m 8304 4220 S 0.0 0.1 3:55.57 snmpd 4394 root 15 0 119m 5660 2944 S 0.0 0.1 0:02.84 EvMgrC 31804 root 15 0 519m 5180 932 S 0.0 0.1 0:00.46 php-fpm 4138 ntp 15 0 23396 5032 3904 S 0.0 0.1 0:02.38 ntpd 643 nginx 15 0 95276 4408 1524 S 0.0 0.1 0:01.15 nginx 5131 root 16 0 90128 3340 2600 S 0.0 0.1 0:01.41 sshd 28467 root 15 0 90128 3340 2600 S 0.0 0.1 0:00.35 sshd 32602 root 16 0 90128 3332 2600 S 0.0 0.1 0:00.36 sshd 1614 root 16 0 90128 3308 2588 S 0.0 0.1 0:00.02 sshd 2817 root 5 -10 7216 3140 1724 S 0.0 0.1 0:03.80 iscsid 4161 root 15 0 66948 2340 800 S 0.0 0.0 0:10.35 sendmail 1617 nicole 17 0 53876 2000 1516 S 0.0 0.0 0:00.02 sftp-server ... Is there anything else I should be looking at, or any more information that might be useful? I'm just a developer, but the slowdowns on this system worry me and make it hard to do my work.. Help me out, ServerFault!

  Read the article

• CodePlex Daily Summary for Tuesday, March 20, 2012

  CodePlex Daily Summary for Tuesday, March 20, 2012Popular ReleasesNearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...JavaScript Web Resource Manager for Microsoft Dynamics CRM 2011: JavaScript Web Resource Manager (1.2.1420.191): BUG FIXED : When loading scripts from disk, the import of the web resource didn't do anything When scripts were saved to disk, it wasn't possible to edit them with an editorSQL Monitor - managing sql server performance: SQLMon 4.2 alpha 12: 1. improved process visualizer, now shows how many dead locks, and what are the locked objects 2. fixed some other problems.Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...SCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionDaun Management Studio: Daun Management Studio 0.1 (Alpha Version): These are these the alpha application packages for Daun Management Studio to manage MongoDB Server. Please visit our official website http://www.daun-project.comSurvey™ - web survey & form engine: Survey™ 2.0: The new stable Survey™ Project 2.0.0.1 version contains many new features like: Technical changes: - Use of Jquery, ASTreeview, Tabs, Tooltips and new menuprovider Features & Bugfixes: Survey list and search function Folder structure for surveys New Menustructure Library list New Library fields User list and search functions Layout options for a survey with CSS, page header and footer New IP filter security feature Enhanced Token Management New Question fields as ID, Alias...RiP-Ripper & PG-Ripper: RiP-Ripper 2.9.28: changes NEW: Added Support for "PixHub.eu" linksSmartNet: V1.0.0.0: DY SmartNet ?????? V1.0callisto: callisto 2.0.21: Added an option to disable local host detection.Javascript .NET: Javascript .NET v0.6: Upgraded to the latest stable branch of v8 (/tags/3.9.18), and switched to using their scons build system. We no longer include v8 source code as part of this project's source code. Simultaneous multithreaded use of v8 now supported (v8 Isolates), although different contexts may not share objects or call each other. 64-bit .Net 4.0 DLL now included. (Download now includes x86 and x64 for both .Net 3.5 and .Net 4.0.)MyRouter (Virtual WiFi Router): MyRouter 1.0.6: This release should be more stable there were a few bug fixes including the x64 issue as well as an error popping up when MyRouter started this was caused by a NULL valueGoogle Books Downloader for Windows: Google Books Downloader-2.0.0.0.: Google Books DownloaderFinestra Virtual Desktops: 2.5.4501: This is a very minor update release. Please see the information about the 2.5 and 2.5.4500 releases for more information on recent changes. This update did not even have an automatic update triggered for it. Adds error checking and reporting to all threads, not only those with message loopsAcDown????? - Anime&Comic Downloader: AcDown????? v3.9.2: ?? ●AcDown??????????、??、??????，????1M，????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????，??????、????????????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? ??????????????，??????????： ??"AcDo...ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.0 Release Candidate: Your feedback is welcome - and this is your last chance to get your fixes in for this version! Includes installer for both Feature Server extension and Desktop extension, enhanced functionality for the Desktop tools, and enhanced built-in Javascript Editor for the Feature Server component. This release candidate includes fixes to beta 4 that accommodate domain users for setting up the Server Component, and fixes for reporting/uploading references tracked in the revision table. See Code In-P...C.B.R. : Comic Book Reader: CBR 0.6: 20 Issue trackers are closed and a lot of bugs too Localize view is now MVVM and delete is working. Added the unused flag (take care that it goes to true only when displaying screen elements) Backstage - new input/output format choice control for the conversion Backstage - Add display, behaviour and register file type options in the extended options dialog Explorer list view has been transformed to a custom control. New group header, colunms order and size are saved Single insta...New Projects{3S} SQL Smart Security "Protect your T-SQL know-how!": {3S} SQL Smart Security is an add-in which can be installed in Microsoft SQL Server Management Studio (SSMS). It enables software companies to create a secured content for database objects. The add-in brings much higher level of protection in comparison with SQL Server built in WITH ENCRYPTION feature.BETA - Content Slider for SharePoint 2010 / Office 365: SharePoint Banner / SharePoint 2010 Sliding Banner / Content Slider tools in Office 365/ Sliding Content in SharePoint is a general tool which could be used for sliding Banners or any other sliding content to be placed on any Office 365 / SharePoint 2010 / SharePoint Foundation.BF3 Development Server: The main issue of this project is to deliver a test server to all developers working on RCon (Remote-Administration-Console) Tools for Battlefield 3. Actually the only possibility to test the work made is to hire a real Game Server. BizTalk Server 2010 TCP/IP Adapter: This project is migration of existing BizTalk server 2009 TCPIP adapter to BizTalk server 2010. I have made few configuration changes which are making this adapter and installation compatible to BizTalk Server 2010. I have not modified adapter source code.BryhtCommon: It`s for easy to develope WP7 ,it contains some useful method Bug.Net Defect Tracking Components: Bug.Net server-side controls and components to add defect (bug) tracking to your current ASP.NET website.Customize Survey With Client Object Model: Customize OOB Survey/Vote/Poll in Share?Point With Client Object Model Visit http://swatipoint.blogspot.in/2011/12/sharepoint-client-object-modellist.html for more detailsDropboxToDo: A simple todo, synchronizing by Dropbox or, in future, by SkydriveFoggy: Foggy is a WPF dashboard for FogBugz information.Fort Myers High School Website: A website for Fort Myers High School in Fort Myers, Florida. This website will allow for both students and parents to better interact with the school. Developed in ASP.net (C#).Gonte.DataAccess: Data access for NET. It's developed in C#.Gonte.ObjectModel: Metadata about objects. It's developed in C#Gonte.SqlGenerator: Sql Generator It's developed in C#.kLib: This project space is for datastructures and classes, which should always be available. Any developer should use these in their projects. Liuyi.Phone.CharmScreen: Liuyi.Phone.CharmScreen Liuyi windows phone appLoU: Lord of Ultima helper suite.Managing Supplies: This WP7 project is able to manage your own suppliesNAV Fixed Assets 2012: Changes related to 'Dossier Fiscal' in Microsoft Dynamics NAV 2009 - New Model 30 - Changes to model 31 and model 32NCAA Tourney DotNetNuke Module: The NCAA Tourney is a DotNetNuke 3.X - 6.X module that allows you to add a NCAA tournament to your portal. You can allow users to record their picks for the tournament and then manage the outcome of the tournament calculating the winner of your tourney based on customizable point system. The module has been designed to be very user friendly and efficient for the end user as well as the administrator of the tournament.nothing here anymore: nothing here anymoreOrchard Dream Store Project: A simple website using Orchard CMS. For a school projectPowerShell Management Library for TEM: A project to provide a PowerShell functionality for managing your Tivoli Endpoint Manager (built upon BigFix technology). You can locally or remotely manage endpoints and relays via these simple and easy to use PowerShell Module.PrismWebBuilder: Web Builder ProjectProjeto Northwind: Northwind - FPUQLCF: QLCFShipwire API: Shipwire makes it easier for consumers of Shipwire's international shipment fulfilment service to integrate their XML API quickly and easily. Current features are: Inventory Service Rate Service (Shipping Costs) Future features are: Order Entry Service Order Tracking ServiceSmith XNA tools: Smith's XNA tools is a set of useful that i make to improve some basics features to XNA and make the Game Design More Easy.ST Recover: ST Recover can read Atari ST floppy disks on a PC under Windows, including special formats as 800 or 900 KB and damaged or desynchronized disks, and produces standard .ST disk image files. Then the image files can be read in ST emulators as WinSTon or Steem.SyncSMS: Windows desktop client for the Android App SyncSMS. This code is not affiliated with SyncSMS in any way,tempzz: tempzzTruxtor: Truxtor modular concept for electronic gadgetsTT SA TEST1: TT SA Test 1VisualQuantCode: Neuroquants is a library in c# for quants It's developed in c#.Weeps: Generate Bass and drum line in type of midi to be guitar's backing track that was playing by userxxtest: xxtest???-????? "???????????": ?????-????????? ???????????? Digital Design 2012. ??? ????. ?????? ?: ?????????????????? ??????? ?????. ??????? ?????????? ????????? ????????. ?????????? ?????????????? ??????? ??????? ? ????? ???????????? Digital Design 2012.????? ???????????? Digital Design 2012. ??? ????. ?????? ?: ?????????????????? ??????? ?????. ??????? ?????????? ????????? ????????. ?????????? ?????????????? ??????? ??????? ? ????? ???????????? Digital Design 2012.

  Read the article

• How to store generated eigen faces for future face recognition?

  - by user3237134

  My code works in the following manner: 1.First, it obtains several images from the training set 2.After loading these images, we find the normalized faces,mean face and perform several calculation. 3.Next, we ask for the name of an image we want to recognize 4.We then project the input image into the eigenspace, and based on the difference from the eigenfaces we make a decision. 5.Depending on eigen weight vector for each input image we make clusters using kmeans command. Source code i tried: clear all close all clc % number of images on your training set. M=1200; %Chosen std and mean. %It can be any number that it is close to the std and mean of most of the images. um=60; ustd=32; %read and show images(bmp); S=[]; %img matrix for i=1:M str=strcat(int2str(i),'.jpg'); %concatenates two strings that form the name of the image eval('img=imread(str);'); [irow icol d]=size(img); % get the number of rows (N1) and columns (N2) temp=reshape(permute(img,[2,1,3]),[irow*icol,d]); %creates a (N1*N2)x1 matrix S=[S temp]; %X is a N1*N2xM matrix after finishing the sequence %this is our S end %Here we change the mean and std of all images. We normalize all images. %This is done to reduce the error due to lighting conditions. for i=1:size(S,2) temp=double(S(:,i)); m=mean(temp); st=std(temp); S(:,i)=(temp-m)*ustd/st+um; end %show normalized images for i=1:M str=strcat(int2str(i),'.jpg'); img=reshape(S(:,i),icol,irow); img=img'; end %mean image; m=mean(S,2); %obtains the mean of each row instead of each column tmimg=uint8(m); %converts to unsigned 8-bit integer. Values range from 0 to 255 img=reshape(tmimg,icol,irow); %takes the N1*N2x1 vector and creates a N2xN1 matrix img=img'; %creates a N1xN2 matrix by transposing the image. % Change image for manipulation dbx=[]; % A matrix for i=1:M temp=double(S(:,i)); dbx=[dbx temp]; end %Covariance matrix C=A'A, L=AA' A=dbx'; L=A*A'; % vv are the eigenvector for L % dd are the eigenvalue for both L=dbx'*dbx and C=dbx*dbx'; [vv dd]=eig(L); % Sort and eliminate those whose eigenvalue is zero v=[]; d=[]; for i=1:size(vv,2) if(dd(i,i)>1e-4) v=[v vv(:,i)]; d=[d dd(i,i)]; end end %sort, will return an ascending sequence [B index]=sort(d); ind=zeros(size(index)); dtemp=zeros(size(index)); vtemp=zeros(size(v)); len=length(index); for i=1:len dtemp(i)=B(len+1-i); ind(i)=len+1-index(i); vtemp(:,ind(i))=v(:,i); end d=dtemp; v=vtemp; %Normalization of eigenvectors for i=1:size(v,2) %access each column kk=v(:,i); temp=sqrt(sum(kk.^2)); v(:,i)=v(:,i)./temp; end %Eigenvectors of C matrix u=[]; for i=1:size(v,2) temp=sqrt(d(i)); u=[u (dbx*v(:,i))./temp]; end %Normalization of eigenvectors for i=1:size(u,2) kk=u(:,i); temp=sqrt(sum(kk.^2)); u(:,i)=u(:,i)./temp; end % show eigenfaces; for i=1:size(u,2) img=reshape(u(:,i),icol,irow); img=img'; img=histeq(img,255); end % Find the weight of each face in the training set. omega = []; for h=1:size(dbx,2) WW=[]; for i=1:size(u,2) t = u(:,i)'; WeightOfImage = dot(t,dbx(:,h)'); WW = [WW; WeightOfImage]; end omega = [omega WW]; end % Acquire new image % Note: the input image must have a bmp or jpg extension. % It should have the same size as the ones in your training set. % It should be placed on your desktop ed_min=[]; srcFiles = dir('G:\newdatabase\*.jpg'); % the folder in which ur images exists for b = 1 : length(srcFiles) filename = strcat('G:\newdatabase\',srcFiles(b).name); Imgdata = imread(filename); InputImage=Imgdata; InImage=reshape(permute((double(InputImage)),[2,1,3]),[irow*icol,1]); temp=InImage; me=mean(temp); st=std(temp); temp=(temp-me)*ustd/st+um; NormImage = temp; Difference = temp-m; p = []; aa=size(u,2); for i = 1:aa pare = dot(NormImage,u(:,i)); p = [p; pare]; end InImWeight = []; for i=1:size(u,2) t = u(:,i)'; WeightOfInputImage = dot(t,Difference'); InImWeight = [InImWeight; WeightOfInputImage]; end noe=numel(InImWeight); % Find Euclidean distance e=[]; for i=1:size(omega,2) q = omega(:,i); DiffWeight = InImWeight-q; mag = norm(DiffWeight); e = [e mag]; end ed_min=[ed_min MinimumValue]; theta=6.0e+03; %disp(e) z(b,:)=InImWeight; end IDX = kmeans(z,5); clustercount=accumarray(IDX, ones(size(IDX))); disp(clustercount); QUESTIONS: 1.It is working fine for M=50(i.e Training set contains 50 images) but not for M=1200(i.e Training set contains 1200 images).It is not showing any error.There is no output.I waited for 10 min still there is no output. I think it is going infinite loop.What is the problem?Where i was wrong? 2.Instead of running the training set everytime how eigen faces generated are stored so that stored eigen faces are used for future face recoginition for a new input image.So it reduces wastage of time.

  Read the article

• Vectorization of matlab code for faster execution

  - by user3237134

  My code works in the following manner: 1.First, it obtains several images from the training set 2.After loading these images, we find the normalized faces,mean face and perform several calculation. 3.Next, we ask for the name of an image we want to recognize 4.We then project the input image into the eigenspace, and based on the difference from the eigenfaces we make a decision. 5.Depending on eigen weight vector for each input image we make clusters using kmeans command. Source code i tried: clear all close all clc % number of images on your training set. M=1200; %Chosen std and mean. %It can be any number that it is close to the std and mean of most of the images. um=60; ustd=32; %read and show images(bmp); S=[]; %img matrix for i=1:M str=strcat(int2str(i),'.jpg'); %concatenates two strings that form the name of the image eval('img=imread(str);'); [irow icol d]=size(img); % get the number of rows (N1) and columns (N2) temp=reshape(permute(img,[2,1,3]),[irow*icol,d]); %creates a (N1*N2)x1 matrix S=[S temp]; %X is a N1*N2xM matrix after finishing the sequence %this is our S end %Here we change the mean and std of all images. We normalize all images. %This is done to reduce the error due to lighting conditions. for i=1:size(S,2) temp=double(S(:,i)); m=mean(temp); st=std(temp); S(:,i)=(temp-m)*ustd/st+um; end %show normalized images for i=1:M str=strcat(int2str(i),'.jpg'); img=reshape(S(:,i),icol,irow); img=img'; end %mean image; m=mean(S,2); %obtains the mean of each row instead of each column tmimg=uint8(m); %converts to unsigned 8-bit integer. Values range from 0 to 255 img=reshape(tmimg,icol,irow); %takes the N1*N2x1 vector and creates a N2xN1 matrix img=img'; %creates a N1xN2 matrix by transposing the image. % Change image for manipulation dbx=[]; % A matrix for i=1:M temp=double(S(:,i)); dbx=[dbx temp]; end %Covariance matrix C=A'A, L=AA' A=dbx'; L=A*A'; % vv are the eigenvector for L % dd are the eigenvalue for both L=dbx'*dbx and C=dbx*dbx'; [vv dd]=eig(L); % Sort and eliminate those whose eigenvalue is zero v=[]; d=[]; for i=1:size(vv,2) if(dd(i,i)>1e-4) v=[v vv(:,i)]; d=[d dd(i,i)]; end end %sort, will return an ascending sequence [B index]=sort(d); ind=zeros(size(index)); dtemp=zeros(size(index)); vtemp=zeros(size(v)); len=length(index); for i=1:len dtemp(i)=B(len+1-i); ind(i)=len+1-index(i); vtemp(:,ind(i))=v(:,i); end d=dtemp; v=vtemp; %Normalization of eigenvectors for i=1:size(v,2) %access each column kk=v(:,i); temp=sqrt(sum(kk.^2)); v(:,i)=v(:,i)./temp; end %Eigenvectors of C matrix u=[]; for i=1:size(v,2) temp=sqrt(d(i)); u=[u (dbx*v(:,i))./temp]; end %Normalization of eigenvectors for i=1:size(u,2) kk=u(:,i); temp=sqrt(sum(kk.^2)); u(:,i)=u(:,i)./temp; end % show eigenfaces; for i=1:size(u,2) img=reshape(u(:,i),icol,irow); img=img'; img=histeq(img,255); end % Find the weight of each face in the training set. omega = []; for h=1:size(dbx,2) WW=[]; for i=1:size(u,2) t = u(:,i)'; WeightOfImage = dot(t,dbx(:,h)'); WW = [WW; WeightOfImage]; end omega = [omega WW]; end % Acquire new image % Note: the input image must have a bmp or jpg extension. % It should have the same size as the ones in your training set. % It should be placed on your desktop ed_min=[]; srcFiles = dir('G:\newdatabase\*.jpg'); % the folder in which ur images exists for b = 1 : length(srcFiles) filename = strcat('G:\newdatabase\',srcFiles(b).name); Imgdata = imread(filename); InputImage=Imgdata; InImage=reshape(permute((double(InputImage)),[2,1,3]),[irow*icol,1]); temp=InImage; me=mean(temp); st=std(temp); temp=(temp-me)*ustd/st+um; NormImage = temp; Difference = temp-m; p = []; aa=size(u,2); for i = 1:aa pare = dot(NormImage,u(:,i)); p = [p; pare]; end InImWeight = []; for i=1:size(u,2) t = u(:,i)'; WeightOfInputImage = dot(t,Difference'); InImWeight = [InImWeight; WeightOfInputImage]; end noe=numel(InImWeight); % Find Euclidean distance e=[]; for i=1:size(omega,2) q = omega(:,i); DiffWeight = InImWeight-q; mag = norm(DiffWeight); e = [e mag]; end ed_min=[ed_min MinimumValue]; theta=6.0e+03; %disp(e) z(b,:)=InImWeight; end IDX = kmeans(z,5); clustercount=accumarray(IDX, ones(size(IDX))); disp(clustercount); Running time for 50 images:Elapsed time is 103.947573 seconds. QUESTIONS: 1.It is working fine for M=50(i.e Training set contains 50 images) but not for M=1200(i.e Training set contains 1200 images).It is not showing any error.There is no output.I waited for 10 min still there is no output. I think it is going infinite loop.What is the problem?Where i was wrong?

  Read the article

• connecting mysql from android with jdbc

  - by manuraphy

  hai i used the following code to connect mysql in local host from android. it only displays the actions given in catch section . i dont know whether its a connection problem or not package com.test1; import java.sql.Connection; import java.sql.DriverManager; import java.sql.PreparedStatement; import java.sql.ResultSet; import android.app.Activity; import android.os.Bundle; import android.widget.TextView; public class Test1Activity extends Activity { /** Called when the activity is first created. */ String str="new"; static ResultSet rs; static PreparedStatement st; static Connection con; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); final TextView tv=(TextView)findViewById(R.id.user); try { Class.forName("com.mysql.jdbc.Driver"); con=DriverManager.getConnection("jdbc:mysql://10.0.2.2:8080/example","root",""); st=con.prepareStatement("select * from country where id=1"); rs=st.executeQuery(); while(rs.next()) { str=rs.getString(2); } tv.setText(str); setContentView(tv); } catch(Exception e) { tv.setText(str); } } } when executes it displays "new" in the avd. java.lang.management.ManagementFactory.getThreadMXBean, referenced from method com.mysql.jdbc.MysqlIO.appendDeadlockStatusInformation Could not find class 'javax.naming.StringRefAddr', referenced from method com.mysql.jdbc.ConnectionPropertiesImpl$ConnectionProperty.storeTo Could not find method javax.naming.Reference.get, referenced from method com.mysql.jdbc.ConnectionPropertiesImpl$ConnectionProperty.initializeFrom can anyone suggest some solution ? and thankz in advance

  Read the article

• Problem converting a byte array into datatable.

  - by kranthi

  Hi, In my aspx page I have a HTML inputfile type which allows user to browse for a spreadsheet.Once the user choses the file to upload I want to read the content of the spreadsheet and store the content into mysql database table. I am using the following code to read the content of the uploaded file and convert it into a datatable in order into insert it into database table. if (filMyFile.PostedFile != null) { // Get a reference to PostedFile object HttpPostedFile myFile = filMyFile.PostedFile; // Get size of uploaded file int nFileLen = myFile.ContentLength; // make sure the size of the file is > 0 if (nFileLen > 0) { // Allocate a buffer for reading of the file byte[] myData = new byte[nFileLen]; // Read uploaded file from the Stream myFile.InputStream.Read(myData, 0, nFileLen); DataTable dt = new DataTable(); MemoryStream st = new MemoryStream(myData); st.Position = 0; System.Runtime.Serialization.IFormatter formatter = new System.Runtime.Serialization.Formatters.Binary.BinaryFormatter(); dt=(DataTable)formatter.Deserialize(st); } } But I am getting the following error when I am trying to deserialise the byte array into datatable. Binary stream '0' does not contain a valid BinaryHeader. Possible causes are invalid stream or object version change between serialization and deserialization. Could someone please tell me what am I doing wrong? I've also tried converting the bytearray into string ,then converting the string back to byte array and convert into datatable.That is also throwing the same error. Thanks.

  Read the article

• retrieve data from multiple tables referencing some tables in mysql

  - by I Like PHP

  i have 10 tables have innoDB engine 1. one is state_table which attributes are state_id and state_name 2. another table city_table which attributes are city_id and city_name 3. one more table permit_table which attribute is p_id above city_id,state_id and permit_id is references to rest of 7 tables. each table having state_id, city_id and permit_id referencing above tables now i want to extract all tables data with their respective city name and state name ( each tables may have different city id and state id) i m using below mysql query( i know it's very length way.... ) . please tell me how to do it with optimized method? SELECT p.*,cp.city_name,sp.state_name, o.*,co.city_name,so.state_name, t.*,ct.city_name,st.state_name, th.*,cth.city_name,sth.state_name, f.*,cf.city_name,sf.state_name .......so on................ .......so on................ ............................ FROM permit_table p JOIN table_city cp ON cp.city_id=p.city_id JOIN table_state sp ON sp.state_id=p.state_id JOIN table_one o ON o.permit_id=p.permit_id JOIN table_city co ON co.city_id=o.city_id JOIN table_state so ON so.state_id=o.state_id JOIN table_two t ON t.permit_id=p.permit_id JOIN table_city ct ON ct.city_id=t.city_id JOIN table_state st ON st.state_id=t.state_id JOIN table_three th ON th.permit_id=p.permit_id JOIN table_city cth ON cth.city_id=th.city_id JOIN table_state sth ON sth.state_id=th.state_id JOIN table_four f ON f.permit_id=p.permit_id JOIN table_city cf ON cf.city_id=f.city_id JOIN table_state sf ON sf.state_id=f.state_id ................so on......................... ................so on......................... .............................................. WHERE p.permit_id=base64_encode(mysql_real_escape_string($_GET[pid])); Thanks For help me always.

  Read the article

• retrive data from multiple tables referencing some tables in mysql

  - by I Like PHP

  i have 10 tables have innoDB engine 1. one is state_table which attributes are state_id and state_name 2. another table city_table which attributes are city_id and city_name 3. one more table permit_table which attribute is p_id above city_id,state_id and permit_id is references to rest of 7 tables. each table having state_id, city_id and permit_id referencing above tables now i want to extract all tables data with their respective city name and state name ( each tables may have different city id and state id) i m using below mysql query( i know it's very length way.... ) . please tell me how to do it with optimized method? SELECT p.*,cp.city_name,sp.state_name, o.*,co.city_name,so.state_name, t.*,ct.city_name,st.state_name, th.*,cth.city_name,sth.state_name, f.*,cf.city_name,sf.state_name .......so on................ .......so on................ ............................ FROM permit_table p JOIN table_city cp ON cp.city_id=p.city_id JOIN table_state sp ON sp.state_id=p.state_id JOIN table_one o ON o.permit_id=p.permit_id JOIN table_city co ON co.city_id=o.city_id JOIN table_state so ON so.state_id=o.state_id JOIN table_two t ON t.permit_id=p.permit_id JOIN table_city ct ON ct.city_id=t.city_id JOIN table_state st ON st.state_id=t.state_id JOIN table_three th ON th.permit_id=p.permit_id JOIN table_city cth ON cth.city_id=th.city_id JOIN table_state sth ON sth.state_id=th.state_id JOIN table_four f ON f.permit_id=p.permit_id JOIN table_city cf ON cf.city_id=f.city_id JOIN table_state sf ON sf.state_id=f.state_id ................so on......................... ................so on......................... .............................................. WHERE p.permit_id=base64_encode(mysql_real_escape_string($_GET[pid]); Thanks For help me always.

  Read the article

• JSON and Microformats

  - by Tauren

  I'm looking for opinions on whether microformats should be used to name JSON elements. For instance, there is a microformat for physical addresses, that looks like this: <div class="adr"> <div class="street-address">665 3rd St.</div> <div class="extended-address">Suite 207</div> <span class="locality">San Francisco</span>, <span class="region">CA</span> <span class="postal-code">94107</span> <div class="country-name">U.S.A.</div> </div> There is a document available on using JSON and Microformats. The information above could be represented as JSON data like this: "adr": { "street-address":"665 3rd St.", "extended-address":"Suite 207", "locality":"San Fransicso", "region":"CA", "postal-code":"94107", "country-name":"U.S.A." }, The issue I have with this is that I'd like my JSON data to be as lightweight as possible, but still human readable. While still supporting international addresses, I would prefer something like this: "address": { "street":"665 3rd St.", "extended":"Suite 207", "locality":"San Fransicso", "region":"CA", "code":"94107", "country":"U.S.A." }, If I'm designing a new JSON API right now, does it make sense to use microformats from the start? Or should I not really worry about it? Is there some other standard that is more specific to JSON that I should look at?

  Read the article

• Copy data from different worksheet to a master worksheet but no duplicates

  - by sam

  hi all, i want to clarify my initial question for a possible solutions from any savior out there. Say i have 3 excel sheets one for each user for data entry located in separate workbooks to avoid excel share workbook problems. I also have a master sheet in another workbook where i want individual data enter on those sheets precisely sheets 1 should copy to the next available row of sheet 1 in the master sheet as the users enter them. i need a vba code that can copy each record without copying a duplicate row in the master sheet but highlight the duplicate row and lookup the initial record in a master sheet and return the name of the Imputer looking up the row say column ( I) where each user sign there initials after every row of entry like below. All 4 worksheets are formatted as below: lastname account cardno. type tran amount date location comments initials JAME 65478923 1975 cash 500 4/10/2010 miles st. this acct is resolve MLK BEN 52436745 1880 CHECK 400 4/12/2010 CAREY ST Ongoing investigation MLK JAME 65478923 1975 cash 500 4/10/2010 miles st. this acct is resolve MLK I need the vba to recognize duplicates only if the account number and the card number matches the initial records. So if the duplicates exist a pop up message should be display that a duplicates exist and return the initial Imputer say MLK in COLUMN( I) to any user inputting in the individual worksheets other than warehouse sheets (master). So please any idea will be appreciated.

  Read the article

• valgrind complains doing a very simple strtok in c

  - by monkeyking

  Hi I'm trying to tokenize a string by loading an entire file into a char[] using fread. For some strange reason it is not always working, and valgrind complains in this very small sample program. Given an input like test.txt first second And the following program #include <stdio.h> #include <string.h> #include <stdlib.h> #include <sys/stat.h> //returns the filesize in bytes size_t fsize(const char* fname){ struct stat st ; stat(fname,&st); return st.st_size; } int main(int argc, char *argv[]){ FILE *fp = NULL; if(NULL==(fp=fopen(argv[1],"r"))){ fprintf(stderr,"\t-> Error reading file:%s\n",argv[1]); return 0; } char buffer[fsize(argv[1])]; fread(buffer,sizeof(char),fsize(argv[1]),fp); char *str = strtok(buffer," \t\n"); while(NULL!=str){ fprintf(stderr,"token is:%s with strlen:%lu\n",str,strlen(str)); str = strtok(NULL," \t\n"); } return 0; } compiling like gcc test.c -std=c99 -ggdb running like ./a.out test.txt thanks

  Read the article

• Using RecordStore in Java J2ME

  - by me123

  Hi, I am currently doing some J2ME development. I am having a problem in that a user can add and remove elements to the record store, and if a record gets deleted, then that record is left empty and the others don't move up one. I'm trying to come up with a loop that will check if a record has anything in it (incase it has been deleted) and if it does then I want to add the contents of that record to a list. My code is similar to as follows: for (int i = 1; i <= rs.getNumRecords(); i++) { // Re-allocate if necessary if (rs.getRecordSize(i) > recData.length) recData = new byte[rs.getRecordSize(i)]; len = rs.getRecord(i, recData, 0); st = new String(recData, 0, len); System.out.println("Record #" + i + ": " + new String(recData, 0, len)); System.out.println("------------------------------"); if(st != null) { list.insert(i-1, st, null); } } When it gets to rs.getRecordSize(i), I always get a "javax.microedition.rms.InvalidRecordIDException: error finding record". I know this is due to the record being empty but I can't think of a way to get around this problem. Any help would be much appreciated. Thanks in advance.

  Read the article

• Problem storing a hash in DB using Storable::nfreeze in Perl

  - by Sam

  I want to insert a hash in the db using Storable::nfreeze but the data is not inserted properly. My code is as follows: %rec=(); $rec{'name'} = 'my name'; $rec{'address'} = 'my address'; my $order1 = new Order(); $order1->set_session(\%rec); $self->createOrder($order1); sub createOrder { my $self = $_[0]; my $order = $_[1]; # Retrieve the fields to insert into the database. my $st = $dbh->prepare("insert into order (session,.......) values(?,........)"); my $session = %{$order->get_session()}; $st->execute(&Storable::nfreeze(\%session),.....); $st->finish(); } sub getOrder { ... my $session = &Storable::thaw( $ref->{'session'} ); ..... } The thaw is working fine because I tested it withe some rows that have been inserted correctly, but when I try to get a row that was inserted using the createOrder subroutine, I get an error saying: Storable binary image v36.65 more recent than I am (v2.7) at blib/lib/Storable.pm (autosplit into blib/lib/auto/Storable/thaw.al) line 415 The error comes from the line that have thaw. The nfreeze did not store the hash properly. Can someone point me to what I'm doing wrong in the createOrder subroutine? I know the module version have nothing to do with the problem.

  Read the article

• problem storing a hash in DB using Storage::nfreeze Perl

  - by Sam

  Hello, I want to insert a hash in the db using Storage::nfreeze but the data is not inserted properly. the code is as follow: %rec=(); $rec{'name'} = 'my name'; $rec{'address'} = 'my address'; my $order1 = new Order(); $order1->set_session(\%rec); $self->createOrder($order1); sub createOrder { my $self = $_[0]; my $order = $_[1]; # Retrieve the fields to insert into the database. my $st = $dbh->prepare("insert into order (session,.......) values(?,........)"); my $session = %{$order->get_session()}; $st->execute(&Storable::nfreeze(\%session),.....); $st->finish(); } sub getOrder { ... my $session = &Storable::thaw( $ref->{'session'} ); ..... } the thaw is working fine because I tested it withe some rows that have been inserted correctly. but when I try to get a row that was inserted using the createOrder subroutine, I get an error saying" Storable binary image v36.65 more recent than I am (v2.7) at blib/lib/Storable.pm (autosplit into blib/lib/auto/Storable/thaw.al) line 415 the error comes from the line that have thaw. the nfreeze did not store the hash properly. Can someone point me to what i m doing wrong in the createOrder subroutine? Thanks in advance. I know the module version have nothing to do with the problem.

  Read the article

• Is it possible to group records belonging to an entity in dbunit?

  - by Joshua

  Our JPA entity model auto-generates primary key identifiers for user, user_address tables. Would it be possible to group these entities given below via dbunit, so that I don't need to provide neither the primary key as well as the foreign key reference from user_address.user_id. It is getting very hard to maintain these keys (i.e. I would prefer to group the primary record 'user' and the child records 'user_address' so that dbunit can group them automatically by looking up the entity metadata). Is it achievable? <user id="1" first_name="Josh" creation_date="2009-07-11 15:45:28"/> <user_address id="1" user_id="1" address="Main St" city="Los Angeles"/> I would prefer something like this <!-- First user --> <user first_name="Josh" creation_date="2009-07-11 15:45:28"/> <user_address address="Main St" city="Los Angeles"/> <!-- Second user --> <user first_name="Mary" creation_date="2009-07-11 15:45:28"/> <user_address address="Taylors St" city="San Jose"/>

  Read the article

• One or more rows contain values violating non-null, unique, or foreign-key constraints in SQL Script

  - by Musikero31

  Need help on this. I'm just wondering why this error occurred. Below is the script concerned. SELECT loc.ID ,loc.LocCode ,loc.LocName ,st.StateName ,reg.RegionName ,ctry.CountryName ,ISNULL(CONVERT(DATE, loc.UpdatedDate), CONVERT(DATE,loc.CreatedDate)) AS [ModifiedDate] ,stf.Name AS [ModifiedBy] FROM Spkr_Country AS ctry WITH (NOLOCK) INNER JOIN Spkr_Location AS loc WITH (NOLOCK) ON ctry.ID = loc.CountryID INNER JOIN Spkr_State AS st WITH (NOLOCK) ON loc.StateID = st.ID INNER JOIN Spkr_Region AS reg WITH (NOLOCK) ON loc.RegionID = reg.ID INNER JOIN Staff AS stf ON ISNULL(loc.UpdatedBy, loc.CreatedBy) = stf.StaffId WHERE (loc.IsActive = 1) AND ( (@LocCode = '') OR ( @LocCode <> '' AND loc.LocCode LIKE @LocCode + '%' ) ) AND ( (@RegionID < 1) OR ( @RegionID > 0 AND loc.RegionID = @RegionID ) ) AND ( (@StateID < 1) OR ( @StateID > 0 AND loc.StateID = @StateID ) ) AND ( (@CountryID < 1) OR ( @CountryID > 0 AND loc.CountryID = @CountryID ) ) The error probably occurred here INNER JOIN Staff AS stf ON ISNULL(loc.UpdatedBy, loc.CreatedBy) = stf.StaffId The requirement that I wanted is that if the loc.UpdatedBy is null, it will use the loc.CreatedBy column. However, when I used this, it generated the error mentioned. In the database, the loc.CreatedBy is not null while the loc.UpdatedBy is nullable. I checked it by running the script but it's working fine. How do I do with it? What's wrong with my code? Please help.

  Read the article

• data transmission between two sites

  - by SaMSa

  I'm use Asp.Net Mvc 4 www.hostname.com to my site from my report.hostname2.com send and receive data to move directly to that address by the string bi codebehind. querysstring not, because sending a very long string I mean rapor.coskunoglu.net/Pdf address to send string data to move directly to that address PDF of the screen to make it appear so. How can I do this? Thank you, take it easy. I'm sorry, my english is not good. EDIT: I want to use POST. sb - my StringBuilder. byte[] bytt = Encoding.UTF8.GetBytes(sb.ToString()); WebRequest wr = WebRequest.Create("http://report.hostname2.com/Pdf"); wr.ContentType = "application/x-www-form-urlencoded"; wr.ContentLength = bytt.Length; wr.Method = "POST"; Stream st = wr.GetRequestStream(); st.Write(bytt, 0, bytt.Length); st.Close(); After you send the POST I want to go to report.hostname2.com. Did you see this my job?

  Read the article

• java url connection, wait for data being sent through the outputstream

  - by Mateu

  I'm writting a java class that tests uploading speed connection to a server. I want to check how many data can be send in 5 seconds. I've written a class which creates a URL, creates a connection, and sends data trough the outPutStream. There is a loop where I writte data to the stream for 5 seconds. However I'm not able to see when data has been send (I writte data to the output stream, but data is not send yet). How can I wait untill data is really sent to the server? Here goes my code (which does not work): URL u = new URL(url) HttpURLConnection uc = (HttpURLConnection) u.openConnection(); uc.setDoOutput(true); uc.setDoInput(true); uc.setUseCaches(false); uc.setDefaultUseCaches(false); uc.setRequestMethod("POST"); uc.setRequestProperty("Content-Type", "application/octet-stream"); uc.connect(); st.start(); // Send the request OutputStream os = uc.getOutputStream(); //This while is incorrect cause it does not wait for data beeing sent while (st.getElapsedTime() < miliSeconds) { os.write(buffer); os.flush(); st.addSize(buffer.length); } os.close(); Thanks

  Read the article

• No operations allowed after statement closed issue

  - by Washu

  I have the next methods in my singleton to execute the JDBC connections public void openDB() throws ClassNotFoundException, IllegalAccessException, InstantiationException, SQLException { Class.forName("com.mysql.jdbc.Driver").newInstance(); String url = "jdbc:mysql://localhost/mbpe_peru";//mydb conn = DriverManager.getConnection(url, "root", "admin"); st = conn.createStatement(); } public void sendQuery(String query) throws SQLException { st.executeUpdate(query); } public void closeDB() throws SQLException { st.close(); conn.close(); } And I'm having a problem in a void where i have to call this twice. private void jButton1ActionPerformed(ActionEvent evt) { Main.getInstance().openDB(); Main.getInstance().sendQuery("call insertEntry('"+EntryID()+"','"+SupplierID()+"');"); Main.getInstance().closeDB(); Main.getInstance().openDB(); for(int i=0;i<dataBox.length;i++){ Main.getInstance().sendQuery("call insertCount('"+EntryID()+"','"+SupplierID()+"','"+BoxID()+"'); Main.getInstance().closeDB(); } } I have already tried to keep the connection open and send the 2 querys and after that closed and it didnt work... The only way it worked was to not use the methods, declare the commands for the connection and use different variables for the connection and the statement. I thought that if i close the Connecion and the Statement I could use the variable once again since is a method but I'm not able to. Is there any way to solve this using my methods for the JDBC connection?

  Read the article

• Java: I've created a list of word objects to include the name and the frequency, but having trouble

  - by adam08

  Hi Everyone, I'm working on a project which has a dictionary of words and I'm extracting them and adding them to an ArrayList as word objects. I have a class called Word as below. What I'm wondering is how do I access these word objects to update the frequency? As part of this project, I need to only have one unique word, and increase the frequency of that word by the number of occurrences in the dictionary. Word(String word) { this.word = word; this.freq = 0; } public String getWord() { return word; } public int getFreq() { return freq; } public void setFreq() { freq = freq + 1; } This is how I am adding the word objects to the ArrayList...I think it's ok? String pattern = "[^a-zA-Z\\s]"; String strippedString = line.replaceAll(pattern, ""); line = strippedString.toLowerCase(); StringTokenizer st = new StringTokenizer(line); while (st.hasMoreTokens()) { String newWord = st.nextToken(); word.add(new Word(newWord)); count++; }

  Read the article

• Translate an IQueryable instance to LINQ syntax in a string

  - by James Dunne

  I would like to find out if anyone has existing work surrounding formatting an IQueryable instance back into a LINQ C# syntax inside a string. It'd be a nice-to-have feature for an internal LINQ-to-SQL auditing framework I'm building. Once my framework gets the IQueryable instance from a data repository method, I'd like to output something like: This LINQ query: from ce in db.EiClassEnrollment join c in db.EiCourse on ce.CourseID equals c.CourseID join cl in db.EiClass on ce.ClassID equals cl.ClassID join t in db.EiTerm on ce.TermID equals t.TermID join st in db.EiStaff on cl.Instructor equals st.StaffID where (ce.StudentID == studentID) && (ce.TermID == termID) && (cl.Campus == campusID) select new { ce, cl, t, c, st }; Generates the following LINQ-to-SQL query: DECLARE @p0 int; DECLARE @p1 int; DECLARE @p2 int; SET @p0 = 777; SET @p1 = 778; SET @p2 = 779; SELECT [t0].[ClassEnrollmentID], ..., [t4].[Name] FROM [dbo].[ei_ClassEnrollment] AS [t0] INNER JOIN [dbo].[ei_Course] AS [t1] ON [t0].[CourseID] = [t1].[CourseID] INNER JOIN [dbo].[ei_Class] AS [t2] ON [t0].[ClassID] = [t2].[ClassID] INNER JOIN [dbo].[ei_Term] AS [t3] ON [t0].[TermID] = [t3].[TermID] INNER JOIN [dbo].[ei_Staff] AS [t4] ON [t2].[Instructor] = [t4].[StaffID] WHERE ([t0].[StudentID] = @p0) AND ([t0].[TermID] = @p1) AND ([t2].[Campus] = @p2) I already have the SQL output working as you can see. I just need to find a way to get the IQueryable to translate into a string representing its original LINQ syntax (with an acceptable translation loss). I'm not afraid of writing it myself, but I'd like to see if anyone else has done this first.

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >