Search Results

Search found 34242 results on 1370 pages for 'tal even tov'.

Page 9/1370 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• Cisco Pix does not let traffic pass from outside to inside even though ACL permits

  - by Rickard

  I have tried to make my pix 515 allow traffic from outisde interface to inside, but despite permitting ACL's, it doesn't seem to let traffic through. (It is letting traffic out as it should though) I am have tried both of the following: access-list acl_in extended permit tcp any host 10.131.73.2 eq www and access-list acl_in extended permit ip any any None of them help, but I can access 10.131.73.2 from any host on the inside network. This is a one single host on the inside that should every now and then have an HTTP server running for development purpouses, so it doesn't need to reside on DMZ (and as far as I know, I can't place it on DMZ either as it's in the same subnet as the other ip's I have. Could I have missed anything? I am using PIX Version 8.0(4) My current running config looks like this: http://pastebin.com/TvRFyDrF Hope someone can help me get this working.

  Read the article

• Cannot remove wireless network profile even though admin account is used

  - by David Karlsson

  On my windows computer which is connected to a company domain. I have problems with the wireless networking. First of all the computer fails to connect. Second of all I cannot remove the network from the list of wireless profiles. The properties window simply claims that "This network is administered by the Administartor Account". I am currently logged in as the local administrator. I have also tried creating a new admin account and still get the same problem when trying to remove the network. My computer has only the microsoft security essentials antivirus and some VMWare+virtual box connections that I can figure might interfere, but disabling realtime protection has not helped me on this. I also cannot delete the virtual network adapters from the control panel / network adapters...

  Read the article

• Configure IIS 6.0 to serve all file extensions, even unknown ones

  - by Nir

  I have a problem with IIS: if I ask an unknown file extension, such as .flv, it doesn't serve it and displays "page not found". I can configure it in the Mime Types, but I want to be able to specify a wildcard, like in IIS 7, where I can allow all types under "Request Filtering". Is it possible? Thanks!

  Read the article

• GeForce 8800GT not even giving basic output

  - by Sam

  My Dad bought a GeForce 8800GT graphics card quite a long time ago now. It has never worked in his PC. Print out from a dxdiag: System Information Time of this report: 4/13/2010, 19:52:40 Machine name: USER-PC Operating System: Windows Vista™ Home Premium (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.091208-0542) Language: English (Regional Setting: English) System Manufacturer: To Be Filled By O.E.M. System Model: To Be Filled By O.E.M. BIOS: Default System BIOS Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (4 CPUs), ~2.3GHz Memory: 2046MB RAM Page File: 1045MB used, 3296MB available Windows Dir: C:\Windows DirectX Version: DirectX 10 DX Setup Parameters: Not found DxDiag Version: 6.00.6001.18000 32bit Unicode DxDiag Notes Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Sound Tab 3: No problems found. Input Tab: No problems found. DirectX Debug Levels Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) Display Devices Card name: ATI Radeon HD 2400 PRO Manufacturer: ATI Technologies Inc. Chip type: ATI Radeon Graphics Processor (0x94C3) DAC type: Internal DAC(400MHz) Device Key: Enum\PCI\VEN_1002&DEV_94C3&SUBSYS_00000000&REV_00 Display Memory: 1012 MB Dedicated Memory: 245 MB Shared Memory: 767 MB Current Mode: 1280 x 960 (32 bit) (75Hz) Monitor: Generic PnP Monitor Driver Name: atiumdag.dll,atiumdva.dat,atitmmxx.dll Driver Version: 7.14.0010.0523 (English) DDI Version: 10 Driver Attributes: Final Retail Driver Date/Size: 8/22/2007 02:43:14, 3021312 bytes That info is from the current card that is installed in it and has been installed since its purchase roughly 3-4 years ago. When I physically install the card I put it into a purple slot on the motherboard that the old card was in (if I go into the device manager and select properties on the current card it confirms that the slot is a "PCI Slot 16 (PCI bus 2, device 0, function 0)") and boot up the computer but get absolutely no output. The screen that we have registers that it is connected to something (by not displaying the screen it does when the cable is unplugged) but just remains blank, no output at all. I recently took the card to my University and one of my friends who is better with hardware issues than I am tried it in his system and it worked perfectly. No issues whatsoever. I do not have a spec list for his system but I could get one if you need it. If you need any more information on this issue I will be happy to supply you with it as I am starting to get very annoyed with this problem ^_^

  Read the article

• Access denied even though I'm an Administrator?

  - by Borek

  My user account on Win7 is part of the Administrators group which has a full control permissions on C:\inetpub\wwwroot: http://twio.cz/ac7p However, when I try to create a folder in it, I get the "access denied" error. This is fixed by adding my specific user account to the list but that shouldn't be necessary should it?

  Read the article

• Access denied even though I'm an Administrator?

  - by Borek

  My user account on Win7 is part of the Administrators group which has a full control permissions on C:\inetpub\wwwroot: http://twio.cz/ac7p However, when I try to create a folder in it, I get the "access denied" error. This is fixed by adding my specific user account to the list but that shouldn't be necessary should it?

  Read the article

• How do I expose a webapp on :8090, even though firewall allows only :80 and :22

  - by Kaustubh P

  I am a noob in Server related stuff, so bear me. I use amazon webservices (EC2) on which I have a webapp running on jetty, which runs on port 8090. I deploy the webapp through the usual method of java -jar start.jar So then to access the app, I have to add a port in the URL, like this: someIP:8090/app But just typing someIP in the browser takes me to a page that shows It works! This is the default web page for this server. The web server software is running but no content has been added, yet. which I assume is apache. I have apache, tomcat and jetty installed. What can I do so that I dont have to specify the port? Do I have to perform port-forwarding? Thanks a lot.

  Read the article

• Node app crashes after a while on micro EC2 instance even with supervisor

  - by Justin Meltzer

  I'm using supervisor to start my node.js application on a micro EC2 instance. However, the app only stays running for some time until it eventually shuts down. Not exactly sure how long the app stays running but I'm guessing for about a few hours or so. Sometimes less. My question is where on the remote server should I be looking in order to debug this kind of issue? I'm running an Amazon Linux AMI.

  Read the article

• Can't set acl for afs even though i'm in the right group

  - by Torandi

  I've got a dir that i've lost controll over in an afs system. According to the system adminstrators my adminin subgroup (dsekt:admin) got rlidwka on the dir. I'm a member of this group (and i can list the members of the group and see my nick there) though I can't set the acl's for the dir. The pts: $pts membership dsekt:admin Members of dsekt:admin (id: -6813) are: /.../ taran And my klist. $>klist Credentials cache: FILE:/tmp/krb5cc_56782 Principal: [email protected] Both dsekt:admin and the dir is on the NADA.KTH.SE node.

  Read the article

• NFS denies mount, even though the client is listed in exports

  - by ajdecon

  We have a couple of servers (part of an HPC cluster) in which we're currently seeing some NFS behavior which is not making sense to me. node1 exports its /lscratch directory via NFS to node2, mounted at /scratch/node1. node2 also exports its own lscratch, which is correspondingly mounted at /scratch/node2 on node1. Unfortunately, whenever I attempt to mount either NFS export on the opposite node, I get the following error: mount: node1:/lscratch failed, reason given by server: Permission denied This despite the fact that I have included first the IP range (10.6.0.0) and then the specific IPs (10.6.7.1, 10.6.7.2) in /etc/exports. Any suggestions? Edit to remove ambiguity: I've made sure that exports only contains either the range, or the specific IPs, not both at the same time.

  Read the article

• Not able to Defrag my drive for shrink even using PerfectDisk on Windows 7

  - by Mithun Sasidharan

  I want to partition my c drive which has over 450gb capacity of which hardly 30gb is being used. I deleted the pagefile.sys and also disabled hibernate and cache memory. I then defragmented and consolidated free space using PerfectDisk 12 and also run a boot time defragmented. Now what remains is Metadata files that preventing me from shrinking the volume beyond half the size if disk. Please tell me what to do?????

  Read the article

• Linux: shortname stuck as "localhost" even though full hostname is correct

  - by DrStalker

  I have a linux (CentOS 5.2) server with the name myserver.mycompnay.com, which is correctly returned when I run 'hostname'. When I run 'hostname -s' however it returns "localhost" which is causing some backup scripts to put stuff in a "localhost" directory instead of a "myserver" directory. All of our other CentOS boxes correctly return the first part of their hostname when 'hostname -s', where do I go on this server to make it behave the same? Other than having "HOSTNAME=myserver.mycompnay.com" in /etc/sysconfig/network what should I be looking at?

  Read the article

• Libre Office/Writer PDF export: white borders appear between lines even after setting borders to none

  - by Yttric

  My document prints ok (exactly as it appears on the screen in Libre Office), but when I export to PDF and view the PDF on screen there are white borders around each text or picture object. Here's a sample snapshot from PDF/Preview: http://imgur.com/TWip5 I've tried selecting a paragraph and changing the border property to None as described in Libre Office help (http://help.libreoffice.org/Common/Borders), setting the "Line arrangement Default" to "Set no borders". But borders set by the Format dialog don't correspond to the borders I see in PDF/Preview. In PDF/Preview the border appears on line boundaries. Borders set in Format appear around each picture, for example. What am I doing wrong?

  Read the article

• Cannot browse remote networks even with WINS configured

  - by paradroid

  As the NetBIOS protocol acts on Layer 2 and so is not routable, In order to enable network browsing of remote networks, WINS has been installed and configured on two domain controllers, both of which are on different networks. The WINS servers seem to be replicating with eachother, and each has 127.0.0.1 set as the Primary WINS Server in each of their LAN interface properties, with nothing entered for Secondary WINS Server. The DC which holds the PDC Emulator FSMO role has the Computer Browser service running and set to Auto start, and it has the WINS/NBT node type network setting at 0x8 (H-node - Hybrid node). Remote network browsing does not work. Is the WINS/NBT node type correct for this scenario? The reason why I think it may not be the right one is because I set the DHCP Server's 046 WINS/NBT node type option to 0x8 as well, after which the DHCP clients started to disappear from the Network folders. When that option is not set, does it default to B-node (Broadcast node)? Or could it be a problem with the WINS servers setup?

  Read the article

• /dev/fuse "permission denied" even when member of fuse group

  - by steeef

  I have a backup script scheduled on a Debian 5.0 x86 server, via sshfs. However, when I attempt to mount the remote directory, I receive: failed to open /dev/fuse: Permission denied ls -l /dev/fuse returns: crwxrwxr-x 1 root fuse 10, 229 2010-11-12 09:08 /dev/fuse id backup returns: uid=501(backup) gid=501(backup) groups=501(backup),46(plugdev),108(fuse) The only way I can get the directory to mount is if I run chmod a+w /dev/fuse, but this is reset at some point during the day. It's a kludge though, and I'd rather figure out why the group permissions aren't working.

  Read the article

• Sony PMB causing failure to load Windows 7 Pro 64-bit normally or even Safe Mode

  - by Wesley

  After installing Sony's Picture Motion Browser on my desktop with Windows 7 Pro x64, it always goes to Startup Repair due to Windows 7 failing to start. This always happens after I try to install it. I've installed with all unnecessary programs closed and all disk drives and unnecessary usb ports empty. I don't exactly know what is causing the problem. Any ideas? My desktop is an HP m8530f. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01469325&tmp_task=prodinfoCategory&lc=en&dlc=en&cc=us&product=3740333&lang=en Only upgrades are an HD4350 and a 500W PSU. EDIT: Windows 7 cannot start now. I'm currently running diagnostic tests from the BIOS. EDIT: Here are the problem details. Problem Signature: Problem Event Name: StartupRepairOffline Problem Signature 01: 6.1.7600.16385 Problem Signature 02: 6.1.7600.16385 Problem Signature 03: unknown Problem Signature 04: 21201022 Problem Signature 05: AutoFailover Problem Signature 06: 8 Problem Signature 07: CorruptFile OS Version: 6.1.7600.2.0.0.256.1 Local ID: 1033 CONCLUSION: So, I think Sony PMB may have caused some sort of corruption in the system files. So if you have Windows 7 and plan on installing Sony PMB, find a Vista or XP machine to install on.

  Read the article

• My Smart-Pad doesn't work, even when I activate it

  - by Darryn

  I have an Asus X5DIJ, and I have had it since Christmas. However, today, the Smart-Pad stopped working. I wasn't clicking anything, I was just typing. Someone suggested downloading drivers, and I'm not to good with guides, so can anyone assist me? Also, when I click on the Smart-Pad icon in the notification area, that icon is crossed out. There is a red X over it, no matter if it is on / off. Can anyone help me, this has happened to my cousin who has the same laptop as me, he now uses a mouse, but I'd rather keep the Smart - Pad.

  Read the article

• port is not open in torrent client even though it was forwarded

  - by aukxn

  I have a problem with port forwarding with my torrent, port check tool says that it open, the firewall exception as well. But with the test by the client not say so. I don't know why. Can anybody help me fix me this problem, the download and upload speed with torrent is very slow. ![enter image description here][1] I don't have enough reputation to post images so here is the link of the image http://i.stack.imgur.com/tgOdr.png http://i.stack.imgur.com/OgjX4.png

  Read the article

• Bootable SD card still has small memory, even after formating

  - by Inazuma

  I have an SD card which I used to run my RaspberryPi. I wanted to update the copy of raspbian on it, so I formated the card using the software from www.sdcard.com. I followed all the instructions correctly, however the size of my SD card didn't go back to it's default. It is a 4gb SD card, which after it's spell in the RaspberryPi had shrunken to 52mb, which I understand is normal. After formatting, the size rose to 3.69gb. This means that there is not enough space to install a new OS, so how can I make my SD card 4gb again? Any help would be much appreciated!

  Read the article

• Can't run command with sudo, even with the full path, I got an error

  - by Keating Wang

  the command starling is /home/keating/.rvm/gems/ruby-1.9.2-p290/bin/starling when run starling, get the error Permission denied when run rvmsudo starling, works well when run sudo starling, get the error sudo: starling: command not found when run sudo /home/keating/.rvm/gems/ruby-1.9.2-p290/bin/starling, get the error: /home/keating/.rvm/rubies/ruby-1.9.2-p290/lib/ruby/site_ruby/1.9.1/rubygems/dependency.rb:247:in to_specs': Could not find starling (>= 0) amongst [minitest-1.6.0, rake-0.8.7, rdoc-2.5.8] (Gem::LoadError) from /home/keating/.rvm/rubies/ruby-1.9.2-p290/lib/ruby/site_ruby/1.9.1/rubygems/dependency.rb:256:into_spec' from /home/keating/.rvm/rubies/ruby-1.9.2-p290/lib/ruby/site_ruby/1.9.1/rubygems.rb:1229:in gem' from /home/keating/.rvm/gems/ruby-1.9.2-p290/bin/starling:18:in' I really want to run the command with sudo, because the error above is the same as running rvmsudo service starling start(I had set starling as a service of the os)

  Read the article

• Looking for Remote Control that works with everything (even Windows 7 Media Center)

  - by T Reddy

  Using my Google-Fu, it seems that the most basic of things one gets with any DVR is the remote control. Had I known it would be difficult just to get a consumer IR receiver for Windows 7 I may not have bothered to build an HTPC. But too late, I already have the HTPC ready to go (minus the CETON card...) So I'm moving away from TiVo, I hate paying the monthly fees and my box is ancient. I'm looking for these solutions to my HTCP setup...I want to: Switch audio from HDMI to SPDIF via the remote control (i.e., switch from TV to Receiver) (as a side note, the built-in audio on the mobo has software to do this). Pressing the volume button on the remote will always change the TV's volume (or the Receiver's if possible) and NOT the PC's volume. The remote/receiver works well around 25 feet. Bonus if the IR Receiver can work with my existing TiVo remote (or other remotes laying around the house) I read a review of the Bluetooth TiVo remote...it sounds promising...but I'm not sure if it is great for Windows 7 HTPC?

  Read the article

• Puppet claims to be unable to resolve domains even if domain properly resolves

  - by gparent

  I have a fairly simple puppet setup, one master and one node, both running Debian Squeeze 6.0.4. I have DNS entries for the two machines, client and master respectively. Both client and master's DNS entries resolve correctly on both machines to the right IPs. On my client, I have this configuration: [main] server = master.example.org logdir=/var/log/puppet vardir=/var/lib/puppet ssldir=/var/lib/puppet/ssl rundir=/var/run/puppet factpath=$vardir/lib/facter pluginsync=true templatedir=/var/lib/puppet/templates Key exchange seems to fail, according to this messages in /var/log/syslog: localhost puppet-agent[11364]: Could not request certificate: getaddrinfo: Name or service not known Why is resolution not working only for puppet?

  Read the article

• Getting prompted for password accessing page through script even when client and server are in same

  - by Munawar

  I'm trying to pull up an internal webpage in automated fashion using the methods in 'Internetexplorer.Application' using vbscript. But I'm getting prompted for password, although the client and the server both are in the same domain. Predictably when I manually try to access the web page, I don't have any problem. Only when I try using cscript.exe or iexplore.exe, I get prompted. I'm trying to automate some of the smoke test we do after a new build is deployed. But this password prompt is getting in the way. Following are the system specs Client machine - IE 7.0, OS is Windows server 2003 Server machine - Windows Server 2008 Both are in the same domain. So far I've unsuccessfully tried following to automate the password input system.diagnostics.process.start var WinHttpReq = new ActiveXObject("WinHttp.WinHttpRequest.5.1"); WinHttpReq.Open("GET", "http://website", false); WinHttpReq.SetCredentials("username", "password", 0); Nothing seems to work I checked in IIS. we have only anonymous and forms authentication enabled Is there any configuration setting in the client machine that can be tweaked to bypass this, although I'd hate to do it since you step on the toes of twenty people trying to do that. Preferable way would be to programmatically input it if its possible. Also, if you can suggest a more appropriate forum, that'd be great too. Please help.

  Read the article

• PHP displays blank white page even with all error reporting enabled

  - by Andy Shinn

  I am trying to debug a broken page in a Drupal application and am having a hard time getting PHP to spit anything useful out. I have the following set: error_reporting = E_ALL display_errors = On display_startup_errors = On log_errors = On error_log = /var/log/php/php_error.log I have a file showing me phpinfo() which confirms these variables are set correctly for the environment. I have increased memory_limit to 256M (which should be more than enough). Yet, the only indication I get is a status 500 code in the apache access log and a blank white page from PHP. The Apache virtual host has LogLevel set to debug and the error log only outputs: [Sat Jun 16 20:03:03 2012] [debug] mod_deflate.c(615): [client 173.8.175.217] Zlib: Compressed 0 to 2 : URL /index.php, referer: http://ec2-174-129-192-237.compute-1.amazonaws.com/admin/reports/updates [Sat Jun 16 20:03:03 2012] [error] [client 173.8.175.217] File does not exist: /var/www/favicon.ico [Sat Jun 16 20:03:03 2012] [debug] mod_deflate.c(615): [client 173.8.175.217] Zlib: Compressed 42 to 44 : URL /favicon.ico The PHP error log outputs nothing at all. kernel and syslog show nothing related to Apache or PHP. I have also tried installing suphp and checking its log just confirms the user is executing correctly: [Sat Jun 16 20:02:59 2012] [info] Executing "/var/www/index.php" as UID 1000, GID 1000 [Sat Jun 16 20:05:03 2012] [info] Executing "/var/www/index.php" as UID 1000, GID 1000 This is on Ubuntu 12.04 x86_64 with the following PHP modules: ii php5 5.3.10-1ubuntu3.1 server-side, HTML-embedded scripting language (metapackage) ii php5-cgi 5.3.10-1ubuntu3.1 server-side, HTML-embedded scripting language (CGI binary) ii php5-cli 5.3.10-1ubuntu3.1 command-line interpreter for the php5 scripting language ii php5-common 5.3.10-1ubuntu3.1 Common files for packages built from the php5 source ii php5-curl 5.3.10-1ubuntu3.1 CURL module for php5 ii php5-gd 5.3.10-1ubuntu3.1 GD module for php5 ii php5-mysql 5.3.10-1ubuntu3.1 MySQL module for php5 So, what am I missing here? Why no error reporting?

  Read the article

• Content not being compressed even though I'm using zlib in php.ini

  - by Tola Odejayi

  I've edited my php.ini file so that it has these two entries: zlib.output_compression = On zlib.output_compression_level = 4 However, after restarting apache, when I request php pages, the headers returned in the response indicate that my server is still NOT serving compressed pages (here are selected headers as viewed using Chrome's Network feature): Cache-Control:no-cache, must-revalidate, max-age=0 Connection:Keep-Alive Content-Type:text/html; charset=UTF-8 Date:Mon, 17 Sep 2012 23:46:13 GMT Expires:Wed, 11 Jan 1984 05:00:00 GMT Last-Modified:Mon, 17 Sep 2012 23:46:13 GMT Pragma:no-cache Proxy-Connection:Keep-Alive Server:Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 PHP/5.2.17 Transfer-Encoding:chunked Via:1.1 XXX-PRXY-07 X-Powered-By:PHP/5.2.17 What might I be doing wrong? Is there any other setting that I need to change? EDIT Here is another set of headers returned to another computer: Cache-Control:no-cache, must-revalidate, max-age=0 Connection:close Content-Type:text/html; charset=UTF-8 Date:Thu, 20 Sep 2012 09:45:26 GMT Expires:Wed, 11 Jan 1984 05:00:00 GMT Last-Modified:Thu, 20 Sep 2012 09:45:26 GMT Pragma:no-cache Server:Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 PHP/5.2.17 Transfer-Encoding:chunked Vary:Cookie X-Powered-By:PHP/5.2.17

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >