Search Results

Search found 5222 results on 209 pages for 'characters'.

Page 90/209 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• Password Cracking in 2010 and Beyond

  - by mttr

  I have looked a bit into cryptography and related matters during the last couple of days and am pretty confused by now. I have a question about password strength and am hoping that someone can clear up my confusion by sharing how they think through the following questions. I am becoming obsessed about these things, but need to spend my time otherwise :-) Let's assume we have an eight-digit password that consists of upper and lower-case alphabetic characters, numbers and common symbols. This means we have 8^96 ~= 7.2 quadrillion different possible passwords. As I understand there are at least two approaches to breaking this password. One is to try a brute-force attack where we try to guess each possible combination of characters. How many passwords can modern processors (in 2010, Core i7 Extreme for eg) guess per second (how many instructions does a single password guess take and why)? My guess would be that it takes a modern processor in the order of years to break such a password. Another approach would consist of obtaining a hash of my password as stored by operating systems and then search for collisions. Depending on the type of hash used, we might get the password a lot quicker than by the bruteforce attack. A number of questions about this: Is the assertion in the above sentence correct? How do I think about the time it takes to find collisions for MD4, MD5, etc. hashes? Where does my Snow Leopard store my password hash and what hashing algorithm does it use? And finally, regardless of the strength of file encryption using AES-128/256, the weak link is still my en/decryption password used. Even if breaking the ciphered text would take longer than the lifetime of the universe, a brute-force attack on my de/encryption password (guess password, then try to decrypt file, try next password...), might succeed a lot earlier than the end of the universe. Is that correct? I would be very grateful, if people could have mercy on me and help me think through these probably simple questions, so that I can get back to work.

  Read the article

• Problem pulling data from website in .NET and C#

  - by Cptcecil

  I have written a web scraping program to go to a list of pages and write all the html to a file. The problem is that when I pull a block of text some of the characters get written as '?'. How do I pull those characters into my text file? Here is my code: string baseUri = String.Format("http://www.rogersmushrooms.com/gallery/loadimage.asp?did={0}&blockName={1}", id.ToString(), name.Trim()); // our third request is for the actual webpage after the login. HttpWebRequest request = (HttpWebRequest)WebRequest.Create(baseUri); request.Method = "GET"; request.UserAgent = "Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1)"; //get the response object, so that we may get the session cookie. HttpWebResponse response = (HttpWebResponse)request.GetResponse(); StreamReader reader = new StreamReader(response.GetResponseStream()); // and read the response string page = reader.ReadToEnd(); StreamWriter SW; string filename = string.Format("{0}.txt", id.ToString()); SW = File.AppendText("C:\\Share\\" + filename); SW.Write(page); reader.Close(); response.Close();

  Read the article

• Truncating long strings with CSS: feasible yet?

  - by Sam Stokes

  Is there any good way of truncating text with plain HTML and CSS, so that dynamic content can fit in a fixed-width-and-height layout? I've been truncating server-side by logical width (i.e. a blindly-guessed number of characters), but since a 'w' is wider than an 'i' this tends to be suboptimal, and also requires me to re-guess (and keep tweaking) the number of characters for every fixed width. Ideally the truncation would happen in the browser, which knows the physical width of the rendered text. I've found that IE has a text-overflow: ellipsis property that does exactly what I want, but I need this to be cross-browser. This property seems to be (somewhat?) standard but isn't supported by Firefox. I've found various workarounds based on overflow: hidden, but they either don't display an ellipsis (I want the user to know the content was truncated), or display it all the time (even if the content wasn't truncated). Does anyone have a good way of fitting dynamic text in a fixed layout, or is server-side truncation by logical width as good as I'm going to get for now?

  Read the article

• Truncate C++ string fields generated by ostringstream, iomanip:setw

  - by Ian Durkan

  In C++ I need string representations of integers with leading zeroes, where the representation has 8 digits and no more than 8 digits, truncating digits on the right side if necessary. I thought I could do this using just ostringstream and iomanip.setw(), like this: int num_1 = 3000; ostringstream out_target; out_target << setw(8) << setfill('0') << num_1; cout << "field: " << out_target.str() << " vs input: " << num_1 << endl; The output here is: field: 00003000 vs input: 3000 Very nice! However if I try a bigger number, setw lets the output grow beyond 8 characters: int num_2 = 2000000000; ostringstream out_target; out_target << setw(8) << setfill('0') << num_2; cout << "field: " << out_target.str() << " vs input: " << num_2 << endl; out_target.str(""); output: field: 2000000000 vs input: 2000000000 The desired output is "20000000". There's nothing stopping me from using a second operation to take only the first 8 characters, but is field truncation truly missing from iomanip? Would the Boost formatting do what I need in one step?

  Read the article

• JTextField vs JComboBox behaviour in JTable

  - by Ash

  Okay, this is a hard one to explain but I'll try my best. I have a JTextField and a JComboBox in a JTable, whose getCellEditor method has been overriden as follows: public TableCellEditor getCellEditor( int row, int column ) { if ( column == 3 ) { // m_table is the JTable if ( m_table.getSelectedRowCount() == 1 ) { JComboBox choices = new JComboBox(); choices.setEditable( true ); choices.addItem( new String( "item 1" ) ); return new DefaultCellEditor( choices ); } return super.getCellEditor( row, column ); } Here are the behavioral differences (NOTE that from this point on, when I say JTextField or JComboBox, I mean the CELL in the JTable containing either component): When I click once on a JTextField, the cell is highlighted. Double clicking brings up the caret and I can input text. Whereas, with a JComboBox, single clicking brings up the caret to input text, as well as the combo drop down button. When I tab or use the arrow keys to navigate to a JTextField and then start typing, the characters I type automatically get entered into the cell. Whereas, when I navigate to a JComboBox the same way and then start typing, nothing happens apart from the combo drop down button appearing. None of the characters I type get entered unless I hit F2 first. So here's my question: What do I need to do have JComboBoxes behave exactly like JTextFields in the two instances described above? Please do not ask why I'm doing what I'm doing or suggest alternatives (it's the way it is and I need to do it this way) and yes, I've read the API for all components in question....the problem is, it's a swing API. Thanks in advance, Ash

  Read the article

• Strange javascript decoding behavior in IE

  - by Yoni

  I run the following html snippet in IE8 and IE7 with non-English characters (we tried both Hebrew and Chinese), and the second link never works properly. The displayed text in the alert box is mangled. This occurs in IE8 and IE7, but not in firefox. It is not dependent on Windows's regional settings. Here is the html snippet (html header and footer omitted for brevity, the content-type is "text/html; charset=utf-8", and so is the response header): <p> <a href="javascript:alert('ab????ab')">link with English and Hebrew text</a> <a href="javascript:alert('ab%D7%A9%D7%9C%D7%95%D7%9Dab')">same text, url encoded</a> </p> Here is the alert box that pops up when clicking the second link: I know that the string for "????" is encoded as 8 bytes in utf-8, thus there are 8 %NN items, and there are also 8 weird characters in the alert box. The problem is, how can I make IE recognize that this is utf-8 encoding text, like firefox does?

  Read the article

• Tell me SQL Server Full-Text searcher is crazy, not me.

  - by Ian Boyd

  i have some customers with a particular address that the user is searching for: 123 generic way There are 5 rows in the database that match: ResidentialAddress1 ============================= 123 GENERIC WAY 123 GENERIC WAY 123 GENERIC WAY 123 GENERIC WAY 123 GENERIC WAY i run a FT query to look for these rows. i'll show you each step as i add more criteria to the search: SELECT ResidentialAddress1 FROM Patrons WHERE CONTAINS(Patrons.ResidentialAddress1, '"123*"') ResidentialAddress1 ========================= 123 MAPLE STREET 12345 TEST 123 MINE STREET 123 GENERIC WAY 123 FAKE STREET ... (30 row(s) affected) Okay, so far so good, now adding the word "generic": SELECT ResidentialAddress1 FROM Patrons WHERE CONTAINS(Patrons.ResidentialAddress1, '"123*"') AND CONTAINS(Patrons.ResidentialAddress1, '"generic*"') ResidentialAddress1 ============================= 123 GENERIC WAY 123 GENERIC WAY 123 GENERIC WAY 123 GENERIC WAY 123 GENERIC WAY (5 row(s) affected) Excellent. And now i'l add the final keyword that the user wants to make sure exists: SELECT ResidentialAddress1 FROM Patrons WHERE CONTAINS(Patrons.ResidentialAddress1, '"123*"') AND CONTAINS(Patrons.ResidentialAddress1, '"generic*"') AND CONTAINS(Patrons.ResidentialAddress1, '"way*"') ResidentialAddress1 ------------------------------ (0 row(s) affected) Huh? No rows? What if i query for just "way*": SELECT ResidentialAddress1 FROM Patrons WHERE CONTAINS(Patrons.ResidentialAddress1, '"way*"') ResidentialAddress1 ------------------------------ (0 row(s) affected) At first i thought that perhaps it's because of the *, and it's requiring that the root way have more characters after it. But that's not true: Searching for "123*" matches "123" Searching for "generic*" matches "generic" Books online says, The asterisk matches zero, one, or more characters What if i remove the * just for s&g: SELECT ResidentialAddress1 FROM Patrons WHERE CONTAINS(Patrons.ResidentialAddress1, '"way"') Server: Msg 7619, Level 16, State 1, Line 1 A clause of the query contained only ignored words. So one might think that you are just not allowed to even search for way, either alone, or as a root. But this isn't true either: SELECT * FROM Patrons WHERE CONTAINS(Patrons.*, '"way*"') AccountNumber FirstName Lastname ------------- --------- -------- 33589 JOHN WAYNE So sum up, the user is searching for rows that contain all the words: 123 generic way Which i, correctly, translate into the WHERE clauses: SELECT * FROM Patrons WHERE CONTAINS(Patrons.*, '"123*"') AND CONTAINS(Patrons.*, '"generic*"') AND CONTAINS(Patrons.*, '"way*"') which returns no rows. Tell me this just isn't going to work, that it's not my fault, and SQL Server is crazy. Note: i've emptied the FT index and rebuilt it.

  Read the article

• Windows cmd encoding change causes Python crash.

  - by Alex

  First I chage Windows CMD encoding to utf-8 and run Python interpreter: chcp 65001 python Then I try to print a unicode sting inside it and when i do this Python crashes in a peculiar way (I just get a cmd prompt in the same window). >>> import sys >>> print u'ëèæîð'.encode(sys.stdin.encoding) Any ideas why it happens and how to make it work? UPD: sys.stdin.encoding returns 'cp65001' UPD2: It just came to me that the issue might be connected with the fact that utf-8 uses multi-byte character set (kcwu made a good point on that). I tried running the whole example with 'windows-1250' and got 'ëeaî?'. Windows-1250 uses single-character set so it worked for those characters it understands. However I still have no idea how to make 'utf-8' work here. UPD3: Oh, I found out it is a known Python bug. I guess what happens is that Python copies the cmd encoding as 'cp65001 to sys.stdin.encoding and tries to apply it to all the input. Since it fails to understand 'cp65001' it crushes on any input that contains non-ascii characters.

  Read the article

• I'm looking for a way to evaluate reading rate in several languages

  - by i30817

  I have a software that is page oriented instead of scrollbar oriented so i can easily count the words, but i'd like a way to filter outliers and some default value for the text language (that is known). The goal is from the remaining text to calculate the remaining time. I'm not sure what is the best unit to use. WPM (words per minute) from here seems very fuzzy and human oriented. Besides i don't know how many "words" remain in the text. http://www.sfsu.edu/~testing/CalReadRate.htm So i came up with this: The user is reading the text. The total text size in characters is known. His position in the text is known. So the remaining characters to read is also known. If a language has a median word length of say 5 chars, then if i had a WPM speed for the user, i could calculate the remaining time. 3 things are needed for this: 1) A table of the median word length of the language. 2) A table of the median WPM of a median user per language. 3) Update the WPM to fit the user as data becomes available, filtering outliers. However i can't find these tables. And i'm not sure how precise it is assuming median word length.

  Read the article

• Haskell: "how much" of a type should functions receive? and avoiding complete "reconstruction"

  - by L01man

  I've got these data types: data PointPlus = PointPlus { coords :: Point , velocity :: Vector } deriving (Eq) data BodyGeo = BodyGeo { pointPlus :: PointPlus , size :: Point } deriving (Eq) data Body = Body { geo :: BodyGeo , pict :: Color } deriving (Eq) It's the base datatype for characters, enemies, objects, etc. in my game (well, I just have two rectangles as the player and the ground right now :p). When a key, the characters moves right, left or jumps by changing its velocity. Moving is done by adding the velocity to the coords. Currently, it's written as follows: move (PointPlus (x, y) (xi, yi)) = PointPlus (x + xi, y + yi) (xi, yi) I'm just taking the PointPlus part of my Body and not the entire Body, otherwise it would be: move (Body (BodyGeo (PointPlus (x, y) (xi, yi)) wh) col) = (Body (BodyGeo (PointPlus (x + xi, y + yi) (xi, yi)) wh) col) Is the first version of move better? Anyway, if move only changes PointPlus, there must be another function that calls it inside a new Body. I explain: there's a function update which is called to update the game state; it is passed the current game state, a single Body for now, and returns the updated Body. update (Body (BodyGeo (PointPlus xy (xi, yi)) wh) pict) = (Body (BodyGeo (move (PointPlus xy (xi, yi))) wh) pict) That tickles me. Everything is kept the same within Body except the PointPlus. Is there a way to avoid this complete "reconstruction" by hand? Like in: update body = backInBody $ move $ pointPlus body Without having to define backInBody, of course.

  Read the article

• How to convert Unicode strings (\u00e2, etc) into NSString for display?

  - by karlbecker_com

  I am trying to support arbitrary unicode from a variety of international users. They have already put a bunch of data into sqlite databases on their iPhones, and now I want to capture the data into a database, then send it back to their device. Right now I am using a php page that is sending data back to from an internet mysql database. The data is saved in the mysql database properly, but when it's sent back it comes out as unicode text, such as Frank\u00e2\u0080\u0099s iPad instead of just Frank's iPad where the apostrophe should really be a curly apostrophe. The answer posted to another question indicates that there is no built-in Cocoa methods to convert the "\u00e2\u0080\u0099" portion of the unicode string from the webserver to an NSString object. Is this correct? That seems really surprising (and scarily disappointing), since Cocoa definitely allows input from many different Unicode characters, and I need to support any arbitrary language that I have never heard of, and all of the possible characters. I save them to and from the local sqlite database just fine now, but once I send it to a web server, then perhaps pull down different data, I want to ensure the data pulled from the web server is correctly formatted.

  Read the article

• How to send parameters with same encoding from javascript?

  - by nimcap

  I have a javascript file that lots of people have embedded to their pages. Since I am hosting the file, I have control over that javascript file; I cannot control the way it is embedded because lots of people is using it already. This javascript file sends GET requests to my servlets, and the parameters passed with the request are recorded to DB. For example, javascript sends a request to http://myserver.com/servlet?p1=123&p2=aString and then servlet records 123 and aString to DB somehow. Before sending strings I use encodeURIComponent() to encode it. But what I figured out is every client sends the same string with different encodings depending on either their browser or the site they are visiting. As a result, same strings are represented with different characters when it reaches servlet (so they are different strings). What I am trying to do is to convert the strings to one kind of encoding from javascript so when they reach the client same words are represented with same characters. How is this possible? PS. If there is a way to convert the encoding from Java it is also applicable.

  Read the article

• Why is my program printing out the null termination character?

  - by Tyler Pfaff

  When I run this, it will SOMETIMES print out a null termination character. Most of the time it will, and probably 1/5 times it will print just the characters. void cryptogram::Encrypt(){ cout<<"encrypt"<tempS){ len=tempS.length(); int a=0; for(int j=0;j if(j!=len){ //if the word still has more characters j++; a=0; }else{ //if the word is done being scanned cout<<" "; } } } } } } } So that's it and this is the corresponding EXPECTED output that is printed SOMETIMES xvk bkikhxlr wggbtfkj wiylekgbdhx wjjm hko wigbtubxt xvk iwhj uedjkm glctb gvrmdiwhj iebbdielmeggtbx ctb xvtmk gbtubxvk wjjdxdthgbtubodll khvxvk imkbfdik xt xvk bkudth whj gbtfdjk hko tgxdthm whj tggtbxehdxdkm ctb mxejkhxmibdzdhtltur whj pemxdik mxejdkm mxdh cok wbk wlmt gbkgctb cteb hko zdh cgvrmdikjeiwhj qdhkmdtlturzzkjdydtivkzdmxbrw zdh zdjjlkkjeiwhj w jtixtbdh kjeiwjzdhdmxbittgkbodxv mjme whj eimj This is what normally prints though xvkÈ bkikhxlrÈ wggbtfkjÈ wiylekgbdhxÈ wjjmÈ hkoÈ wigbtubxtÈ xvkÈ iwhjÈ uedjkmÈ glctbÈ gvrmdiwhjÈ iebbdielmeggtbxÈ ctbÈ xvtmkÈ gbtubxvkÈ wjjdxdthgbtubodllÈ khvxvkÈ imkbfdikÈ xtÈ xvkÈ bkudthÈ whjÈ gbtfdjkÈ hkoÈ tgxdthmÈ whjÈ tggtbxehdxdkmÈ ctbÈ mxejkhxmibdzdhtlturÈ whjÈ pemxdikÈ mxejdkmÈ mxdhÈ cokÈ wbkÈ wlmtÈ gbkgctbÈ ctebÈ hkoÈ zdhÈ cgvrmdikjeiwhjÈ qdhkmdtlturzzkjdydtivkzdmxbrwÈ zdhÈ zdjjlkkjeiwhjÈ wÈ jtixtbdhÈ kjeiwjzdhdmxbittgkbodxvÈ mjmeÈ whjÈ eimj or some variation of an odd character at the end of each word This is what the cryptogram array is filled with by the way wyijkcuvdpqlzhtgabmxefonrs

  Read the article

• Problems with display of UTF-8 encoded content from a DB

  - by LookUp Webmaster

  Dear members of the Stackoverflow community, We are developing a web application using the Zend Framework, and we are facing some encoding issues that we hope you might help us solve. The situation goes something like this: There are certain tables on a MySQL database that need to be displayed as html. Because the site is designed using the Spanish language, the database contains some characters like "á" or "ñ". Our internal policy is to set all the encodings as UTF-8, including all the databases and the tables. The problem is, that when we retrieve the content from the DB, some characters are displayed as question marks. We are out of ideas. These are all the things that we have already tried and double-checked: 1. The SQL file from which we load all the data is properly UTF-8 encoded. 2. The SQL is loaded through phpmyadmin (which is configured as UTF-8), and the resulting tables are displayed properly. 3. The netbeans environment used for coding is also set as UTF-8. The weird thing is that all the content that is hard-coded either as php or html is displayed properly. Only the values that are extracted from the database have issues. Any ideas? Thank you very much.

  Read the article

• Have I found a security problem in an API or do I just not understand SSL?

  - by jamieb

  I'm working on building a set of Python bindings around an XML-based API provided by a vendor. The vendor requires that all transactions be conducted over SSL. Using a Linux box, I created a key file and a CSR for my application. Using their self-service web portal, I then generate a certificate using that CSR. Both the key file and the certificate are used when making the SSL request to the API. I'm now working on designing exception classes to make error messages more verbose (and, hopefully, more useful to developers using my bindings). Part of my testing has included altering the key file: transpose a couple characters here, replace 4 or 5 with random characters there, etc. To my surprise, altering the key file had no effect! As long as I didn't change the total length of it, the API didn't complain about a bad key file. The only way I was able to throw an error was by swapping in a completely different key from another application. At that point, the API complained about the Common Name not matching. Is this normal behavior or has the vendor not properly implemented SSL?

  Read the article

• Implementing a scrabble trainer

  - by bstullkid

  Hello, I've recently been playing alot of online scrabble so I decided to make a program that quickly searches through a dictionary of 200,000+ words with an input of up to any 26 letters. My first attempt was fail as it took a while when you input 8 or more letters (just a basic look through dictionary and cancel out a letter if its found kind of thing), so I made a tree like structure containing only an array of 26 of the same structure and a flag to indicate the end of a word, doing that It can output all possible words in under a second even with an input of 26 characters. But it seems that when I input 12 or more letters with some of the same characters repeated i get duplicates; can anyone see why I would be getting duplicates with this code? (ill post my program at the bottom) Also, the next step once the duplicates are weeded out is to actually be able to input the letters on the game board and then have it calculate the best word you can make on a given board. I am having trouble trying to figure out a good algorithm that can analyze a scrabble board and an input of letters and output a result; the possible words that could be made I have no problem with but actually checking a board efficiently (ie can this word fit here, or here etc... without creating a non dictionary word in the process on some other string of letters) Anyone have a idea for an approach at that? (given a scrabble board, and an input of 7 letters, find all possible valid words or word sets that you can make) lol crap i forgot to email myself the code from my other computer thats in another state... ill post it on monday when I get back there! btw the dictionary im using is sowpods (http://www.calvin.edu/~rpruim/scrabble/ospd3.txt)

  Read the article

• Problem with for-loop in python

  - by Protean

  This code is supposed to be able to sort the items in self.array based upon the order of the characters in self.order. The method sort runs properly until the third iteration, unil for some reason the for loop seems to repeat indefinitely. What is going on here? class sorting_class: def __init__(self): self.array = ['ca', 'bd', 'ac', 'ab'] #An array of strings self.arrayt = [] self.globali = 0 self.globalii = 0 self.order = ['a', 'b', 'c', 'd'] #Order of characters self.orderi = 0 self.carry = [] self.leave = [] self.sortedlist = [] def sort(self): for arrayi in self.arrayt: #This should only loop for the number items in self.arrayt. However, the third time this is run it seems to loop indefinitely. print ('run', arrayi) #Shows the problem if self.order[self.orderi] == arrayi[self.globali]: self.carry.append(arrayi) else: if self.globali != 0: self.leave.append(arrayi) def srt(self): self.arrayt = self.array my.sort() #First this runs the first time. while len(self.sortedlist) != len(self.array): if len(self.carry) == 1: self.sortedlist.append(self.carry) self.arrayt = self.leave self.leave = [] self.carry = [] self.globali = 1 self.orderi = 0 my.sort() elif len(self.carry) == 0: if len(self.leave) != 0: #Because nothing matches 'aa' during the second iteration, this code runs the third time" self.arrayt = self.leave self.globali = 1 self.orderi += 1 my.sort() else: self.arrayt = self.array self.globalii += 1 self.orderi = self.globalii self.globali = 0 my.sort() self.orderi = 0 else: #This is what runs the second time. self.arrayt = self.carry self.carry = [] self.globali += 1 my.sort() my = sorting_class() my.srt()

  Read the article

• Problem using unicode in URLs with cgi.PATH_INFO in ColdFusion

  - by Loftx

  Hi there, My ColdFusion (MX7) site has search functionality which appends the search term to the URL e.g. http://www.example.com/search.cfm/searchterm. The problem I'm running into is this is a multilingual site, so the search term may be in another language e.g. ??????? leading to a search URL such as http://www.example.com/search.cfm/??????? The problem is when I come to retrieve the search term from the URL. I'm using cgi.PATH_INFO to retrieve the path of the search page and the search term and extracting the search term from this e.g. /search.cfm/searchterm however, when unicode characters are used in the search they are converted to question marks e.g. /search.cfm/??????. These appear actual question marks, rather than the browser not being able to format unicode characters, or them being mangled on output. I can't find any information about whether ColdFusion supports unicode in the URL, or how I can go about resolving this and getting hold of the complete URL in some way - does anyone have any ideas? Cheers, Tom

  Read the article

• python gui events out of order

  - by dave

  from Tkinter import * from tkMessageBox import * class Gui: def __init__(self, root): self.container = Frame(root) self.container.grid() self.inputText = Text(self.container, width=50, height=8) self.outputText = Text(self.container, width=50, height=8, bg='#E0E0E0', state=DISABLED) self.inputText.grid(row=0, column=0) self.outputText.grid(row=0, column=1) self.inputText.bind("<Key>", self.translate) def translate(self, event): input = self.inputText.get(0.0, END) output = self.outputText.get(0.0, END) self.outputText.config(state=NORMAL) self.outputText.delete(0.0, END) self.outputText.insert(INSERT, input) self.outputText.config(state=DISABLED) showinfo(message="Input: %s characters\nOutput: %s characters" % (len(input), len(input))) root = Tk() #toplevel object app = Gui(root) #call to the class where gui is defined root.mainloop() #enter event loop Working on a gui in tkinter I'm a little confused as to the sequence the event handlers are run. If you run the above code you'll hopefully see... 1) Editing the text widget triggers the event handler but it seems to fire it off without registering the actual change, 2) Even when the text widget is cleared (ie, keep pressing BackSpace) it still seems to have a one character length string, 3) The output widget only receives its update when the NEXT event trigger is fired despite the fact the data came on the previous event. Is this just how bindings work in tkinter or am i missing something here? The behaviour i would like when updating the input widget is: 1) Show the change, 2) Enter event handler, 3) Update output widget, 4) Show message box.

  Read the article

• Excess errors on model from somewhere

  - by gmile

  I have a User model, and use an acts_as_authentic (from authlogic) on it. My User model have 3 validations on username and looks as following: User < ActiveRecord::Base acts_as_authentic validates_presence_of :username validates_length_of :username, :within => 4..40 validates_uniqueness_of :username end I'm writing a test to see my validations in action. Somehow, I get 2 errors instead of one when validating a uniqueness of a name. To see excess error, I do the following test: describe User do before(:each) do @user = Factory.build(:user) end it "should have a username longer then 3 symbols" do @user2 = Factory(:user) @user.username = @user2.username @user.save puts @user.errors.inspect end end I got 2 errors on username: @errors={"username"=>["has already been taken", "has already been taken"]}. Somehow the validation passes two times. I think authlogic causes that, but I don't have a clue on how to avoid that. Another case of problem is when I set username to nil. Somehow I get four validation errors instead of three: @errors={"username"=>["is too short (minimum is 3 characters)", "should use only letters, numbers, spaces, and .-_@ please.", "can't be blank", "is too short (minimum is 4 characters)"]} I think authlogic is one that causes this strange behaviour. But I can't even imagine on how to solve that. Any ideas?

  Read the article

• XmlSerializer 'forgetting' my namespace

  - by Michel

  Hi, i have to create an XML file with all the elements prefixed, like this: <ps:Request num="123" xmlns:ps="www.ladieda.com"> <ps:ClientId>5566</ps:ClientId> <ps:Request> When i serialize my object, c# is smart and does this: <Request num="123" xmlns="www.ladieda.com"> <ClientId>5566</ClientId> <Request> That is good, because the ps: is not necessary. But is there a way to force C# to serialize all the prefixes? My serialize code is this (for incoming object pObject): String XmlizedString = null; MemoryStream memoryStream = new MemoryStream(); XmlSerializer xs = new XmlSerializer(pObject.GetType()); XmlTextWriter xmlTextWriter = new XmlTextWriter(memoryStream, Encoding.UTF8); xs.Serialize(xmlTextWriter, pObject); memoryStream = (MemoryStream)xmlTextWriter.BaseStream; XmlizedString = UTF8ByteArrayToString(memoryStream.ToArray()); return XmlizedString; private String UTF8ByteArrayToString(Byte[] characters) { UTF8Encoding encoding = new UTF8Encoding(); String constructedString = encoding.GetString(characters); return (constructedString); }

  Read the article

• [AS3] Calling Php Script with UTF-8 POST variables

  - by kornelijepetak

  AS3 documentation says that Strings in AS3 are in UTF-16 format. There is a textbox on a Flash Clip where user can type some data. When a button is clicked, I want this data to be sent to a php script. I have everything set up, but it seems that the PHP script gets the data in UTF-16 format. The data in the database (which is utf-8) shows some unrecognizable characters (where special characters are used), meaning that the data has not been sent in a correct encoding. var variables:URLVariables=new URLVariables; var varSend:URLRequest=new URLRequest("http://website.com/systematic/accept.php"); varSend.method=URLRequestMethod.POST; varSend.data=variables; var varLoader:URLLoader=new URLLoader; varLoader.dataFormat=URLLoaderDataFormat.VARIABLES; varLoader.addEventListener(Event.COMPLETE, completeHandler); When submit button is clicked, the following handler gets executed. function sendData(event:MouseEvent) : void { // i guess here is the problem (tbName.text is UTF-16) variables.name = tbName.text; varLoader.load(varSend); } Is there any way to send the data so that PHP script gets the data in UTF-8 format? (PHP script is retrieving the value using the $_POST['name']).

  Read the article

• Vim: Making Auto-Completion Smarter

  - by Rafid K. Abdullah

  I use ctags, taglist, etc., to have auto completion in Vim. However, it is very limited compared to Visual Studio intellisense or Eclipse auto-completion. I am wondering whether it is possible to tune Vim to: Show auto-completion whenever . or - are typed. But only after some text that might be a variable (e.g. avoid showing auto completion after a number). Show function parameters when ( is typed. Stop removing the auto completion list when some delete all characters after . or -: When I enter a variable name, then press . or - to search for a certain member, I frequently have to delete all the characters I type after the . or -, but this makes Vim hide the auto completion list. I would like to keep it visible unless I press Esc. Showing related auto completion: When I type a variable and press ^X ^O, it usually shows me all the tags in the ctags file. I would like to have it showing only the tags related to the variable. Thanks for the help. EDIT: Some people are voting for this question, but no body seems to know the answer. So just wanted to mention that you don't have to provide a complete answer; partial answers to any of the mentioned points would be good also.

  Read the article

• Strange behaviour of NSScanner on simple whitespace removal

  - by Michael Waterfall

  I'm trying to replace all multiple whitespace in some text with a single space. This should be a very simple task, however for some reason it's returning a different result than expected. I've read the docs on the NSScanner and it seems like it's not working properly! NSScanner *scanner = [[NSScanner alloc] initWithString:@"This is a test of NSScanner !"]; NSMutableString *result = [[NSMutableString alloc] init]; NSString *temp; NSCharacterSet *whitespace = [NSCharacterSet whitespaceCharacterSet]; while (![scanner isAtEnd]) { // Scan upto and stop before any whitespace [scanner scanUpToCharactersFromSet:whitespace intoString:&temp]; // Add all non whotespace characters to string [result appendString:temp]; // Scan past all whitespace and replace with a single space if ([scanner scanCharactersFromSet:whitespace intoString:NULL]) { [result appendString:@" "]; } } But for some reason the result is @"ThisisatestofNSScanner!" instead of @"This is a test of NSScanner !". If you read through the comments and what each line should achieve it seems simple enough!? scanUpToCharactersFromSet should stop the scanner just as it encounters whitespace. scanCharactersFromSet should then progress the scanner past the whitespace up to the non-whitespace characters. And then the loop continues to the end. What am I missing or not understanding?

  Read the article

• Calling a jQuery method at declaration time, and then onEvent

  - by cesarsalazar

  I've been writing JS (mainly jQuery) for quite a few months now, but today I decided to make my first abstraction as a jQuery method. I already have working code but I feel/know that I'm not doing it the right way, so I come here for some enlightenment. Note: Please do not reply that there's already something out there that does the trick as I already know that. My interest in this matter is rather educational. What my code is intended to do (and does): Limit the characters of a textfield and change the color of the counter when the user is approaching the end. And here's what I have: $(function(){ $('#bio textarea').keyup(function(){ $(this).char_length_validation({ maxlength: 500, warning: 50, validationSelector: '#bio .note' }) }) $('#bio textarea').trigger('keyup'); }) jQuery.fn.char_length_validation = function(opts){ chars_left = opts.maxlength - this.val().length; if(chars_left >= 0){ $(opts.validationSelector + ' .value').text(chars_left); if(chars_left < opts.warning){ $(opts.validationSelector).addClass('invalid'); } else{ $(opts.validationSelector).removeClass('invalid'); } } else{ this.value = this.value.substring(0, opts.maxlength); } } In the HTML: <div id="bio"> <textarea>Some text</textarea> <p class="note> <span class="value">XX</span> <span> characters left</span> </p> </div> Particularly I feel really uncomfortable binding the event each on each keyup instead of binding once and calling a method later. Also, (and hence the title) I need to call the method initially (when the page renders) and then every time the user inputs a character. Thanks in advance for your time :)

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >