Search Results

Search found 4578 results on 184 pages for 'connections'.

Page 90/184 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• Windows Server - Dual NIC Bandwidth Pooling

  - by tsilb

  I have a Windows Server 2008 machine with dual NICs. Both are plugged into the same switch in a typical one-switch, one-gateway home network. This server is used almost exclusively for inbound connections. It hosts a web server (IIS 6), SQL server, and file server (via LAN UNC paths and mapped drives). How do I make best use of inbound bandwidth across both NICs? For example, if I connect to it by hostname and one of the interfaces has high traffic, I'd like the new connection to use the other interface.

  Read the article

• How to connect XP mode VM to the host so as to simulate LAN Activities?

  - by rsjethani

  First of all my PC config: Host:Windows 7(32-bit) Guest: Windows XP SP3 as XP Mode. Integration Features Disabled(I don't think it has any thing to do with networking). Network Connections on Host : 1.Local Area Connection(Realtek...) - unplugged(as no other PC is connected). 2.Nokia 2730 classic USB Modem - I use this connect to the internet. Now,How can I connect the guest to the host as if they were on a LAN. Please give specific steps as I am using Windows XP Mode/Virtual machine for the first time.

  Read the article

• ssh-agent key timeout with screen or tmux on bastion host

  - by Jericon

  Normally I have ssh-agent running, I ssh to my bastion host then open a tmux session and connect to other boxes through that. Key forwarding works for any sessions that I open from that point forward. If I resume my tmux session after closing terminal, sleeping my laptop, whatever, my key forwarding on my bastion sessions still work, as does forwarding on any new sessions. Existing ones don't work, though. I have a little thing in my bashrc that keeps key forwarding working when I resume tmux, but I am having trouble figuring out how to get it to keep working for sessions open within tmux. For example, I have bastion01, dbhost01, dbhost02, webhost01, and webhost02. If I open a connection to bastion01, start tmux there, and then connect to dbhost01 and webhost01 forwarding works. If I close that connection, reconnect and attach my existing tmux session, then add connections to dbhost02 and webhost02, key forwarding works on the 02 boxes, but does not on the 01. Please help!

  Read the article

• Convert from port numbers to protocol names ?

  - by Berkay

  i'm simply using tshark -r botnet.pcap -T fields -E separator=';' -e ip.src -e tcp.srcport -e ip.dst -e tcp.dstport '(tcp.flags.syn == 1 and tcp.flags.ack == 0)' to see the all initiated "legal TCP" connections. However, i need the destination port number conversion to "http" "netbios" etc. i'm not using -n option, but still i get: 128.3.45.128;62259;208.233.189.150;80 This is what i'm trying to get: 128.3.45.128;62259;208.233.189.150;http or 128.3.45.128;62259;208.233.189.150;80;http is better option for me. any idea from tshark users? or any other tool suggestions?

  Read the article

• Firewall blocks FTP PASV response

  - by harper

  0 down vote favorite I have an FTP server that supports passive server mode (using PASV command). This works fine with Windows XP. When I want to access this server from Windows Vista or Windows 7 with firewall enabled I experience a immediate connection shutdown. A reset packet is sent to the server, the socket is signaled that the server had reset the connection (what is not true). The problem disappears when the firewall is disabled. Connections to other FTP servers work correctly. The difference is that the servers response to PASV does not enclose the address field with parentheses. This is legal as documented in RFC-959 and RFC-1132. How can I configure the firewall to stop this bad behavior?

  Read the article

• nhibernate sql Express connection issue - error: 26 - Error Locating Server/Instance Specified

  - by frosty

  I can connect fine with normal ado.net. However i get the following error when i tried to connect nHibernate. hibernate.cfg.xml <?xml version="1.0" encoding="utf-8" ?> <hibernate-configuration xmlns="urn:nhibernate-configuration-2.2"> <session-factory> <property name="dialect">NHibernate.Dialect.MsSql2005Dialect</property> <property name="connection.provider">NHibernate.Connection.DriverConnectionProvider</property> <property name="connection.driver_class">NHibernate.Driver.SqlClientDriver</property> <property name="connection.connection_string">Server=xxxxx\SQLEXPRESS; Database=xxxxx; User ID=xxxxx; Password=xxxxx; Trusted_Connection=True</property> <property name="proxyfactory.factory_class">NHibernate.ByteCode.Castle.ProxyFactoryFactory, NHibernate.ByteCode.Castle</property> <property name="show_sql">true</property> </session-factory> </hibernate-configuration> Server error A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Full stack [SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +4845255 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +194 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +4858557 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +90 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +342 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +221 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +189 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +185 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +31 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +433 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +499 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +65 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +117 System.Data.SqlClient.SqlConnection.Open() +122 NHibernate.Connection.DriverConnectionProvider.GetConnection() +102 NHibernate.Tool.hbm2ddl.SuppliedConnectionProviderConnectionHelper.Prepare() +15 NHibernate.Tool.hbm2ddl.SchemaMetadataUpdater.GetReservedWords(Dialect dialect, IConnectionHelper connectionHelper) +65 NHibernate.Tool.hbm2ddl.SchemaMetadataUpdater.Update(ISessionFactory sessionFactory) +80 NHibernate.Impl.SessionFactoryImpl..ctor(Configuration cfg, IMapping mapping, Settings settings, EventListeners listeners) +599 NHibernate.Cfg.Configuration.BuildSessionFactory() +87 XXX.Domain.Repositories.NHibernateHelper.get_SessionFactory() in D:\dev\MyProject\XXX\XXX.Domain\Repositories\NHibernateHelper.cs:23 XXX.Domain.Repositories.NHibernateHelper.OpenSession() in D:\dev\MyProject\XXX\XXX.Domain\Repositories\NHibernateHelper.cs:31 XXX.Domain.Repositories.EntryRepository.GetCountByGmapId(Int32 gmapId) in D:\dev\MyProject\XXX\XXX.Domain\Repositories\EntryRepository.cs:152 XXX.Controls.Activity.BindRepeater(Int32 id) in D:\dev\MyProject\XXX\XXX.Controls\Activity.ascx.cs:58 XXX.Controls.Activity.DropDownListMaps_SelectedIndexChanged(Object sender, EventArgs e) in D:\dev\MyProject\XXX\XXX.Controls\Activity.ascx.cs:75 System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +111 System.Web.UI.WebControls.DropDownList.RaisePostDataChangedEvent() +134 System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +10 System.Web.UI.Page.RaiseChangedEvents() +165 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1485

  Read the article

• Using Linode as a proxy server wrapped in DNS to bypass paid internet services

  - by snihalani

  I have a linode server that I use for development. I was thinking of using that as a proxy server. I have noticed that most paid connections allow DNS queries but don't allow http until I pay them. I verified this by flushing my dns cache and nslookup some random websites. How do I create a proxy server that allows me to may be wrap my packets from my computer in DNS packets, relay to my linode server with ssh key authentication and act as a broker? Thanks.

  Read the article

• Open Port on Windows Server 2008

  - by user1827348

  I have an external server and I installed a new Service on it. The service is running and I can access it locally. When I tried to get access to it locally, all worked just fine. but when I try to reach it from my laptop over the internet, I get the message, that the port is blocked. I added a rule to the windows firewall that all connections to that port are allowed but it still doesnt work. there is so many things in google that didnt help me, thats why I am asking specifically. I do acutally not know how to google for that right because i am not that into server configs and so on. Can anybody help me, what I have to do, to be able to access that port? From outside.

  Read the article

• Best security practice for small networks - wifi, lan,

  - by Grimlockz

  We regularly setup small networks for clients in different locations to allow them to work on different products now the question what should be the best security practice. Currently we have a wifi enabled with WPA2 and most laptops connect to this but some will connect to a cabled switch connecting to the router. We are thinking on what we should do to increase the security on our small networks - We do have have security on the laptops so you can share directly to the other persons drive by a simple Windows user account. Some suggestions are: We get a LAN switch with ACL control and mac filtering for the hard wired connections? We get acl working on the wifi via a good Cisco router? ipSec policies on all machines? IP filtering and fixed IPs? I suppose people are worried that anyone can plug into the switches and get the access to the network . Summary: Maintain a level of decent security that can be replicated easily to every setup that we do for clients

  Read the article

• Cannot remove wireless network profile even though admin account is used

  - by David Karlsson

  On my windows computer which is connected to a company domain. I have problems with the wireless networking. First of all the computer fails to connect. Second of all I cannot remove the network from the list of wireless profiles. The properties window simply claims that "This network is administered by the Administartor Account". I am currently logged in as the local administrator. I have also tried creating a new admin account and still get the same problem when trying to remove the network. My computer has only the microsoft security essentials antivirus and some VMWare+virtual box connections that I can figure might interfere, but disabling realtime protection has not helped me on this. I also cannot delete the virtual network adapters from the control panel / network adapters...

  Read the article

• iptables port forwarding troubleshooting

  - by cbmanica

  I'm trying to forward connections on port 18600 to port 9980. I have this in /etc/sysconfig/iptables: # Generated by iptables-save v1.3.5 on Mon Oct 21 18:30:43 2013 *nat :PREROUTING ACCEPT [2:280] :POSTROUTING ACCEPT [12:768] :OUTPUT ACCEPT [12:768] -A PREROUTING -p tcp -m tcp --dport 18600 -j REDIRECT --to-ports 9980 COMMIT # Completed on Mon Oct 21 18:30:43 2013 and /etc/init.d/iptables status shows me this: Table: nat Chain PREROUTING (policy ACCEPT) num target prot opt source destination 1 REDIRECT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:18600 redir ports 9980 However, I can telnet from localhost to port 9980, but not 18600. What am I missing? (This is a CentOS-based VM.)

  Read the article

• Offloading Cable Modem operations to Router

  - by Matt

  I may be crazy here, but I seem to recall a conversation in the past stating that it was possible to offload some of the operations taken by one's cable modem to one's router. The logic was that since the cable modem is often equipped with a cheaper processor as it is supplied by your provider, that it often chokes even crashes when you start a torrent or something else with a lot of connections. I seem to recall that some routers offered the ability to take some of the modem's operations. Is this possible or have I imagined the whole thing? I ask because my modem seems to have many issues when I start torrents.

  Read the article

• Virus sending phishing emails through exchange server

  - by therulebookman

  It appears that there is a virus on my network somewhere that is sending phishing emails through my exchange server. I can see the messages in message tracking and I see many SMTP errors for NDR's and rejected connections from external servers, but I do not see any SMTP authentications and I have logging up to MAX. How can I find the IP or hostname of the PC that is infected? Or is there some other explanation than virus? Anti-virus scan on server is clean. Server is not an open relay. Thanks

  Read the article

• postgres memory allocation tuning 2

  - by pstanton

  i've got a Ubuntu Linux system with 12Gb memory most of which (at least 10Gb) can be allocated solely to postgres. the system also has a 6 disk 15k SCSI RAID 10 setup. The process i'm trying to optimise is twofold. firstly a single threaded, single connection will do many inserts into 2-4 tables linked by foreign key. secondly many different complex queries are run against the resulting data, using group by extensively. this part especially needs to be optimised. i have four of these processes running at once in order to make use of the quad core CPU, therefore there will generally be no more than 5 concurrent connections (1 spare for admin tasks). what configuration changes to the default Postgres config would you recommend? I'm looking for the optimum values for things like work_mem, shared_buffers etc. relevant doco thanks!

  Read the article

• Mail server hammering

  - by Rodrigo

  I've noticed a quick increase on smtp connections coming to my server, investigating it further i figured out that there's a botnet hammering my smtp server. I've tried to stop it by adding a rule at iptables: -N SMTP-BLOCK -A SMTP-BLOCK -m limit --limit 1/m --limit-burst 3 -j LOG --log-level notice --log-prefix "iptables SMTP-BLOCK " -A SMTP-BLOCK -m recent --name SMTPBLOCK --set -j DROP -A INPUT -p tcp --dport 25 -m state --state NEW -m recent --name SMTPBLOCK --rcheck --seconds 360 -j SMTP-BLOCK -A INPUT -p tcp --dport 25 -m state --state NEW -m recent --name SMTP --set -A INPUT -p tcp --dport 25 -m state --state NEW -m recent --name SMTP --rcheck --seconds 60 --hitcount 3 -j SMTP-BLOCK -A INPUT -p tcp --dport 25 -m state --state NEW -j ACCEPT That would avoid them from hammering "too fast", however the problem still, there's like 5 tries per second, it's going insane, i had to incrase the maximum number of childs of sendmail/dovecot. There's too many ips to filter out manually and simply changing the smtp to another port is not practical since i got many other clients on that server. I'm using sendmail with dovecot, any ideas to have this filtered out more efficiently?

  Read the article

• How to share internet over VPN and inside a virtual machine (Windows)?

  - by mountrix

  ` My final goal is to have a virtual machine at work in which anything that happen inside (tcp, udp, ping, ...) will use the Internet connection of a computer at home. So, if inside this VM should I open an Internet browser to a site such as "show my IP", my home IP should be printed. I am also looking for a way to debug/develop a software inside this VM, but I would like to tunnel only the connections of this software, not the full graphical interface, this is why a Remote Desktop solution won't fit me. The connection between the both computer should be secured somehow, like in a SSH tunnel. This ultimately should allow me to have a portable VM in which I can connect to whatever networks I have access at home, in a secure way. This is my configuration: At work, I have a LAN-connected desktop computer, with Windows 7 Professional Edition as a host [computer W] On this same computer, I have a Virtual Box machine running Windows XP [computer V] At home, I have a laptop computer, running Windows 7 Home Edition [computer H] This laptop is connected to a Livebox 2 broadband modem by Wifi. What I am trying to do is to sit at work in front of the virtual machine [V], and connect to a webpage as if the request was issued from the laptop [H] at home, and the data should be securely tunneled between the both. But if I am using internet directly inside [W], it should use the normal LAN interface at work. To achieve my goal, I first try using VPN, than SSH tunneling, without success. I first tried to install Teamviewer between [W] and [H]. This is working fine, I can send files, share desktop, etc. Teamviewer has a VPN mode that creates a new VPN network interface with its own IP, both on computer [W] and [H]. This allowed me to connect [H] as a network computer inside [W] and I was able to share files, but not to share Internet. At this point, I tried to use from [W] the Internet as if I was at home. I setup a route (using route add from command line in [W]) in order to instruct each packet going to a given website to pass by the new VPN interface on [W], with the hope it will be forwarded to [H], but the webpage was simply inaccessible. I then tried to setup a Windows VPN connection between [W] and [H], using the Windows 7 VPN feature. [H] was the server and [W] the client. But it failed: I got the "Unable to join a remote PC while trying to VPN" 720 Error when I was setting up the client on [W]. I think the problem is the Livebox 2 that could blocks the packets. But I am not sure of this: 1) with Teamviewer it works fine, 2) Livebox 2 has a configuration page for port mapping that gives the proper configuration to map VPN ports as an example so I guess that it should allow it, 3) I opened the ports 1723 (TCP) and 500 (UDP) according to some forums. Virtual box has a network configuration parameter in which I can use the VPN network interface created by Teamviewer as a bridged connection. This is suppose to work in the sense that all packets issued by the virtual machine [V] is supposed to go directly to [H]. But I had no internet connection inside [V]. Using the NAT mode, [V] has internet. For me this is the feature that I look for: filtering all connections from the virtual box application to the VPN network interface, and the remaining should use the normal LAN interface. Apart from the build-in feature of VBox, I even do not know if it is possible to route the packet from a given application to a given interface. Finally I tried also SSH tunneling, but this is not the solution I looked for. Using an external SSH server (Linux), I was able to create a localhost connection on [W] (or [V]), using something like 'ssh -N -D server[H]' in order to allow a web browser located in [W] to connect to any website using the SOCKS 5 proxy created locally (SOCKS is a build-in feature of SSH). But repeating the same operation on windows, using a windows SSH server inside [W] (I tried freeSSHd), it failed: SFTP worked, but not the SOCKS tunneling, it was like the browser in [H] did not find internet. Finally only Teamviewer looked able to create a VPN between [W] and [H], but I am not able to use it, as I want, I mean using the Internet connection of [H] sitting in front of [W]. I also tried to bridge the VPN interface and the wifi interface inside [H], but it blocked my laptop, and I tried also the Internet Connection Sharing, trying to share on [H] the wifi connection over the VPN interface. This fails also, but it seems because Teamviewer actually use the wifi interface to be able to provide the VPN link, so I guess I am creating a recursive loop. I do not know what to try next... Thank you for any advice!!

  Read the article

• Most efficient way to use a laptop like a desktop? [closed]

  - by user74757

  When I'm at home (which is the vast majority of the time now in Summer), I rarely use my laptop away from my desk. When it is at the desk, I plug in a monitor through HDMI, a power cable, and a mouse and keyboard that always stay there. I was wondering if anyone had any recommendations as to a good dock or product that does a good job of transforming a laptop into a true "desktop replacement." Ideally, it would allow all the connections to remain in place, with minimal effort to take the laptop in and out of the fixture. Thanks for any suggestions!

  Read the article

• What is the best MTA setup for a home/laptop computer (*not* server)?

  - by thomasrutter

  Hello, What is a good MTA (e.g. Postfix or something else) setup for a home computer behind a NAT, or a laptop that is not always online? I've read a lot of Postfix tutorials on how to set it up this way or that, but they are usually geared towards computers that are servers ie they have a static IP have a domain name are always connected to the same network My requirements are, I guess: Ability to redirect mail for local users to another server of my choosing. No listening for incoming SMTP connections - outgoing only Ability to route outgoing mail via an external SMTP server with authentication (and perhaps encryption) If not Postfix, I need an MTA which can queue up mails in case it temporarily has no internet connection.

  Read the article

• Outlook 2003 under RHEL 5 server

  - by Kumar P

  I am using RHEL 5 server as proxy server in Local network. Under server i have few windows machines. Now i want to configure Outlook 2003 for send and receive mails in windows boxes, When i configure and test connections, It showing connection failed. In browser, internet working well. Without proxy, windows outlook - 2003 configure well in windows boxes also working well. What you think about it and How can i solve this problem ? Please give clear steps to solve.

  Read the article

• IIS restart causes many Connection_Abandoned_By_AppPool messages in log

  - by PP

  After about half a day the IIS 6.0 ASP (VBScript) web server appears to die. It accepts TCP connections (i.e. I can telnet localhost 80 successfully) however it does not return any response. When I restart the server (going through My Computer - Manage - IIS - All Tasks - Restart) I get a lot of entries in C:\WINDOWS\system32\LogFiles\HTTPERR\httperr1.log at the time of restart that say: ... 80 HTTP/1.1 GET / - 843545307 Connection_Abandoned_By_AppPool DefaultAppPool ... 80 HTTP/1.0 GET / - 843545307 Connection_Abandoned_By_AppPool DefaultAppPool ... 80 HTTP/1.0 GET / - 843545307 Connection_Abandoned_By_AppPool DefaultAppPool where the ... refers to the prefix of the line, e.g. 2010-03-17 10:05:06 127.0.0.1 4927 127.0.0.1 80 There are 583 such lines (Connection_Abandoned_By_AppPool) in my log at time of restart. What could be the cause of this problem?

  Read the article

• Unusually high memory usage on a CentOS VPS with 512 guaranteed RAM

  - by Andrei Bârsan

  I'm working on a medium-sized web application written in PHP that's running on a VPS with 512mb ram. The webapp hasn't been officially launched yet, so there isn't too much traffic going on, just me and a few other people working on it. There is another slightly smaller webapp also hosted on this machine, among 4-5 other small static sites. We are running Centos 5 32-bit & cPanel/WHM. This is the result of running ps aux and, as you can see, it's not using 100% of the RAM. However, on the hypanel overview, it's always shown as using aroun 500MB ram, just for running apache, mysql, and the lowest-memory-footprint versions of the mail server, ftp server etc. -bash-3.2# ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 2156 664 ? Ss 12:08 0:00 init [3] root 1123 0.0 0.0 2260 548 ? S<s 12:08 0:00 /sbin/udevd -d root 1462 0.0 0.0 1812 568 ? Ss 12:08 0:00 syslogd -m 0 named 1496 0.0 0.0 3808 820 ? Ss 12:08 0:00 nsd named 1497 0.0 0.0 10672 756 ? S 12:08 0:00 nsd named 1499 0.0 0.0 3880 584 ? S 12:08 0:00 nsd root 1514 0.0 0.1 7240 1064 ? Ss 12:08 0:00 /usr/sbin/sshd root 1522 0.0 0.0 2832 832 ? Ss 12:08 0:00 xinetd -stayalive -pidfile /var/run/xinetd.pid root 1534 0.0 0.1 3712 1328 ? S 12:08 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql - mysql 1667 0.0 2.9 225680 30884 ? Sl 12:08 0:00 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql - mailnull 1766 0.0 0.1 9352 1100 ? Ss 12:08 0:00 /usr/sbin/exim -bd -q60m root 1797 0.0 0.0 2156 708 ? Ss 12:08 0:00 /usr/sbin/dovecot root 1798 0.0 0.0 2632 1012 ? S 12:08 0:00 dovecot-auth root 1816 0.0 3.0 38580 32456 ? Ss 12:08 0:01 /usr/local/bin/spamd -d --allowed-ips=127.0.0.1 --pidfi root 1839 0.0 1.6 63200 17496 ? Ss 12:08 0:00 /usr/local/apache/bin/httpd -k start -DSSL root 1846 0.0 0.1 5416 1468 ? Ss 12:08 0:00 pure-ftpd (SERVER) root 1848 0.0 0.1 6212 1244 ? S 12:08 0:00 /usr/sbin/pure-authd -s /var/run/ftpd.sock -r /usr/sbin root 1856 0.0 0.1 4492 1112 ? Ss 12:08 0:00 crond root 1864 0.0 0.0 2356 428 ? Ss 12:08 0:00 /usr/sbin/atd dovecot 1927 0.0 0.1 5196 1952 ? S 12:08 0:00 pop3-login dovecot 1928 0.0 0.1 5196 1948 ? S 12:08 0:00 pop3-login dovecot 1929 0.0 0.1 5316 2012 ? S 12:08 0:00 imap-login dovecot 1930 0.0 0.2 5416 2228 ? S 12:08 0:00 imap-login root 1939 0.0 0.1 3936 1964 ? S 12:08 0:00 cPhulkd - processor root 1963 0.0 0.8 15876 8564 ? S 12:08 0:00 cpsrvd (SSL) - waiting for connections root 1966 0.0 0.7 15172 7748 ? S 12:08 0:00 cpdavd - accepting connections on 2077 and 2078 root 1990 0.0 0.2 5008 3136 ? S 12:08 0:00 queueprocd - wait to process a task root 2017 0.0 2.9 38580 31020 ? S 12:08 0:00 spamd child root 2018 0.0 0.5 8904 5636 ? S 12:08 0:00 /usr/bin/perl /usr/local/cpanel/bin/leechprotect nobody 2021 0.0 3.2 66512 33724 ? S 12:08 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 2022 0.0 3.1 67812 33024 ? S 12:08 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 2024 0.0 1.9 64364 20680 ? S 12:08 0:00 /usr/local/apache/bin/httpd -k start -DSSL root 2027 0.0 0.4 9000 4540 ? S 12:08 0:00 tailwatchd root 2032 0.0 0.1 4176 1836 ? SN 12:08 0:00 cpanellogd - sleeping for logs nobody 3096 0.0 1.9 64572 20264 ? S 12:09 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3097 0.0 2.8 66008 30136 ? S 12:09 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3098 0.0 2.8 65704 29752 ? S 12:09 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3099 0.0 3.1 67260 32816 ? S 12:09 0:00 /usr/local/apache/bin/httpd -k start -DSSL andrei 3448 0.0 0.1 3204 1632 ? S 12:50 0:00 imap nobody 3537 0.0 1.9 64308 20108 ? S 13:01 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3614 0.0 1.9 64576 20628 ? S 13:10 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3615 0.0 1.3 63200 14672 ? S 13:10 0:00 /usr/local/apache/bin/httpd -k start -DSSL root 3626 0.0 0.2 10232 2964 ? Rs 13:14 0:00 sshd: root@pts/0 root 3648 0.0 0.1 3844 1600 pts/0 Ss 13:14 0:00 -bash root 3826 0.0 0.0 2532 908 pts/0 R+ 13:21 0:00 ps aux Lately, without any significant changes to the configuration, the memory usage started peaking and going over 512, causing the virtual server to kill apache, basically murdering our site in the process. Do you have any idea if this is normal and more resources should be acquired? I don't think... since there isn't too much data or traffic online yet.

  Read the article

• SQL Server 2008 is not accessible from Windows Server 2008 ?

  - by Albert Widjaja

  Hi, I have successfully configured Windows Server 2008 Enterprise SP2 with SQL Server 2008 Enterprise SP2 all 64 bit, however when I tried to access this particular SQL Server 2008 DB instance from another SQL Server 2008 SSMS in another Windows Server 2008 it failed ? what I did is to disabled the IPv6 IP address using the regedit but still the problem hasn't been fixed even after restart ? I have enabled the named piped as well but still no luck ? any help please ? Here's the error message: " A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) "

  Read the article

• Setting up Windows 2008 with VPN and NAT

  - by Benson

  I have a Windows 2008 box set up with VPN, and that works quite well. NPS is used to validate the VPN clients, who are able to access the private address of the server, once connected. I can't for the life of me get NAT working for the VPN clients, though. I've added NAT as a routing protocol, and set the one on in the VPN address pool as private, and the other as public - but it still won't NAT connections when I add a route through the VPN server's IP on the client side (route add SomeInternetIp IpOfPrivateInterfaceOnServer). I know I can reach the server's private interface (which happens to be 10.2.2.1) with remote desktop client, so I can't think of any issues with the VPN.

  Read the article

• How to run node.js app on port 80? Are processes blocking my port?

  - by Lucas

  I believe the port 80 on my remote instance is blocked, and I am trying to run a node.js app using port 80. I have experimented with ports 3000 and 3002, and both ports are working fine, but I get an error when running on port 80. I suspect port 80 is blocked from my output of netstat -an below, but how can I find the process id's of the addresses that are blocking port 80 below? [lucas@ecoinstance]~/node/nodetest1$ netstat -an Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:3002 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:27017 127.0.0.1:51108 ESTABLISHED tcp 0 0 127.0.0.1:51106 127.0.0.1:27017 ESTABLISHED tcp 0 0 127.0.0.1:27017 127.0.0.1:51106 ESTABLISHED tcp 0 0 127.0.0.1:51107 127.0.0.1:27017 ESTABLISHED tcp 0 0 10.240.241.116:3002 174.61.171.61:36583 TIME_WAIT tcp 0 0 127.0.0.1:27017 127.0.0.1:51109 ESTABLISHED tcp 0 0 10.240.241.116:42423 169.254.169.254:80 ESTABLISHED tcp 0 0 127.0.0.1:51108 127.0.0.1:27017 ESTABLISHED tcp 0 532 10.240.241.116:22 174.61.171.61:56824 ESTABLISHED tcp 0 0 127.0.0.1:27017 127.0.0.1:51107 ESTABLISHED tcp 0 0 10.240.241.116:42412 169.254.169.254:80 ESTABLISHED tcp 0 0 127.0.0.1:51109 127.0.0.1:27017 ESTABLISHED tcp 0 0 127.0.0.1:51105 127.0.0.1:27017 ESTABLISHED tcp 0 0 10.240.241.116:42422 169.254.169.254:80 TIME_WAIT tcp 0 0 127.0.0.1:27017 127.0.0.1:51105 ESTABLISHED tcp6 0 0 :::22 :::* LISTEN udp 0 0 0.0.0.0:49948 0.0.0.0:* udp 0 0 0.0.0.0:68 0.0.0.0:* udp 0 0 10.240.241.116:123 0.0.0.0:* udp 0 0 127.0.0.1:123 0.0.0.0:* udp 0 0 0.0.0.0:123 0.0.0.0:* udp6 0 0 :::12151 :::* udp6 0 0 :::123 :::* Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 405680 /tmp/ssh-KdkxJfFLpKTC/agent.22 813 unix 2 [ ACC ] STREAM LISTENING 408230 /tmp/ssh-ofUeNNEwAqtP/agent.22 243 unix 2 [ ACC ] STREAM LISTENING 416227 /tmp/mongodb-27017.sock unix 2 [ ACC ] SEQPACKET LISTENING 3692 /run/udev/control unix 7 [ ] DGRAM 5286 /dev/log unix 2 [ ACC ] STREAM LISTENING 5318 /var/run/acpid.socket unix 2 [ ACC ] STREAM LISTENING 16170 /tmp//tmux-1000/default unix 2 [ ACC ] STREAM LISTENING 414450 /var/run/dbus/system_bus_socke And here is the log when trying to run on port 80 with node.js: [lucas@ecoinstance]~/node/nodetest1$ npm start > [email protected] start /home/lucas/node/nodetest1 > node ./bin/www events.js:72 throw er; // Unhandled 'error' event ^ Error: listen EACCES at errnoException (net.js:904:11) at Server._listen2 (net.js:1023:19) at listen (net.js:1064:10) at Server.listen (net.js:1138:5) at Function.app.listen (/home/lucas/node/nodetest1/node_modules/express/lib/applicati on.js:532:24) at Object.<anonymous> (/home/lucas/node/nodetest1/bin/www:7:18) at Module._compile (module.js:456:26) at Object.Module._extensions..js (module.js:474:10) at Module.load (module.js:356:32) at Function.Module._load (module.js:312:12) npm ERR! [email protected] start: `node ./bin/www` npm ERR! Exit status 8 npm ERR! npm ERR! Failed at the [email protected] start script. npm ERR! This is most likely a problem with the nodetest1 package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! node ./bin/www npm ERR! You can get their info via: npm ERR! npm owner ls nodetest1 npm ERR! There is likely additional logging output above. npm ERR! System Linux 3.13-0.bpo.1-amd64 npm ERR! command "/usr/local/bin/node" "/usr/local/bin/npm" "start" npm ERR! cwd /home/lucas/node/nodetest1 npm ERR! node -v v0.10.28 npm ERR! npm -v 1.4.9 npm ERR! code ELIFECYCLE npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /home/lucas/node/nodetest1/npm-debug.log npm ERR! not ok code 0 And sudo netstat -lnp does not return any matching port 80's: [lucas@ecoinstance]~/node/nodetest1$ sudo netstat -lnp [48/648] Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Progr am name tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN 29160/mon god tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1976/sshd tcp6 0 0 :::22 :::* LISTEN 1976/sshd udp 0 0 0.0.0.0:49948 0.0.0.0:* 1604/dhcl ient udp 0 0 0.0.0.0:68 0.0.0.0:* 1604/dhcl ient udp 0 0 10.240.241.116:123 0.0.0.0:* 2076/ntpd udp 0 0 127.0.0.1:123 0.0.0.0:* 2076/ntpd udp 0 0 0.0.0.0:123 0.0.0.0:* 2076/ntpd udp6 0 0 :::12151 :::* 1604/dhcl ient udp6 0 0 :::123 :::* 2076/ntpd Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node PID/Program name Path unix 2 [ ACC ] STREAM LISTENING 405680 22814/ssh-agent /tmp/ssh-K dkxJfFLpKTC/agent.22813 unix 2 [ ACC ] STREAM LISTENING 408230 24049/ssh-agent /tmp/ssh-o fUeNNEwAqtP/agent.22243 unix 2 [ ACC ] STREAM LISTENING 416227 29160/mongod /tmp/mongo db-27017.sock unix 2 [ ACC ] SEQPACKET LISTENING 3692 284/udevd /run/udev/ control unix 2 [ ACC ] STREAM LISTENING 5318 1798/acpid /var/run/a cpid.socket unix 2 [ ACC ] STREAM LISTENING 16170 5177/tmux /tmp//tmux -1000/default unix 2 [ ACC ] STREAM LISTENING 414450 28213/dbus-daemon /var/run/d bus/system_bus_socket unix 2 [ ACC ] STREAM LISTENING 404225 22324/1 /tmp/ssh-9 TlDmu4bjl/agent.22324

  Read the article

• A good Linux alternative to Ubuntu for a working environment.

  - by Roozak

  Hi, Im running a decent laptop with 3GB ram and 2GHz Core Duo. I use it mainly for working which requires several SSH and SFTP connections to servers and running a VM most of the time. Nothing much more intensive than that. I like using Ubuntu 9.10 however I have the issue of Nautilus and the top/bottom menus freezing up on me constantly - dare I say it, alot more problems than when I was using Windows Vista. Im just looking for recommendations of other operating systems which would be suitable for the task. Thanks

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >