Search Results

Search found 2537 results on 102 pages for 'el ka es'.

Page 90/102 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

  • Multithreading: Read from / write to a pipe

    - by Tero Jokinen
    I write some data to a pipe - possibly lots of data and at random intervals. How to read the data from the pipe? Is this ok: in the main thread (current process) create two more threads (2, 3) the second thread writes sometimes to the pipe (and flush-es the pipe?) the 3rd thread has infinite loop which reads the pipe (and then sleeps for some time) Is this so far correct? Now, there are a few thing I don't understand: do I have to lock (mutex?) the pipe on write? IIRC, when writing to pipe and its buffer gets full, the write end will block until I read the already written data, right? How to check for read data in the pipe, not too often, not too rarely? So that the second thread wont block? Is there something like select for pipes? It is possible to set the pipe to unbuffered more or I have to flush it regularly - which one is better? Should I create one more thread, just for flushing the pipe after write? Because flush blocks as well, when the buffer is full, right? I just don't want the 1st and 2nd thread to block.... [Edit] Sorry, I thought the question is platform agnostic but just in case: I'm looking at this from Win32 perspective, possibly MinGW C...

    Read the article

  • How to make smooth movements in OpenGL?

    - by thyrgle
    So this kind of on topic to my other OpenGL question (not my OpenGL ES question but OpenGL the desktop version). If you have someone press a key to move a square how do you make the square movement naturally and less jumpy but also at the same speed I have it now? This is my code for the glutKeyboardFunc() function: void handleKeypress(unsigned char key, int x, int y) { if (key == 'w') { for (int i = 0; i < 12; i++) { if (i == 1 || i == 7 || i == 10 || i == 4) { square[i] = square[i] + 1; } } glutPostRedisplay(); } if (key == 'd') { for (int i = 0; i < 12; i++) { if (i == 0 || i % 3 == 0) { square[i] = square[i] + 1; } } glutPostRedisplay(); } if (key == 's') { for (int i = 0; i < 12; i++) { if (i == 1 || i == 7 || i == 10 || i == 4) { square[i] = square[i] - 1; } } glutPostRedisplay(); } if (key == 'a') { for (int i = 0; i < 12; i++) { if (i == 0 || i % 3 == 0) { square[i] = square[i] - 1; } } glutPostRedisplay(); } } I'm sorry if this doesn't quite make sense I'll try to rephrase it in a better way if it doesn't make sense.

    Read the article

  • Exchange 2010 setup /prepareAD fails to run

    - by MadBoy
    I've tried installing Exchange 2010 on Windows Server 2008 R2 (only domain controller and all-in-one system). I did setup.exe /prepareAD, setup /prepareSchema and it worked fine the first time I did it. Unfortunately due to problem with Hub Transport installation related to (at least from what I've read) IPv6 being disabled (some say disabling it helped them while some enabling helped them). I did it the proper way by using registry entry to disable IPv6 but it still errored out. So i managed to uninstall everything (renamed some old entries in registry of failed Hub Transport roles and tried to reinstal Exchange after rebooting server. Unfortunetly running setup /prepareAD now gives an error: D:setup /PrepareAd Welcome to Microsoft Exchange Server 2010 Unattended Setup By continuing the installation process, you agree to the license terms of Microsoft Exchange Server 2010. If you don't accept these license terms, please cancel the installation. To review these license terms, please go to http://go.microsoft.com/fwlink/?LinkId=150127&clcid=0x409/ Press any key to cancel setup................ No key presses were detected. Setup will continue. Preparing Exchange Setup Copying Setup Files ......................... COMPLETED No server roles will be installed Performing Microsoft Exchange Server Prerequisite Check Organization Checks ......................... COMPLETED Setup is going to prepare the organization for Exchange 2010 by using 'Setup /P repareAD'. No Exchange 2007 server roles have been detected in this topology. Af ter this operation, you will not be able to install any Exchange 2007 server rol es. Configuring Microsoft Exchange Server Organization Preparation ......................... FAILED The following error was generated when "$error.Clear(); buildToBuildUpgrade -ExsetDataAtom -AtomName OrgLevelCt -DomainController $RoleDomainController" was run: "An error occurred with error code '2147504140' and message 'The data type can't be converted to or from a native Active Directory data type.'.". The Exchange Server setup operation did not complete. Visit http://support.micro soft.com and enter the Error ID to find more information. Exchange Server setup encountered an error. Unfortunetly if i rerun the setup it complains that it needs setup /prepareAD to be run first. Basically all that works now is setup /PrepareSchema and setup /PrepareDomain complains that prepareAD wasn't done. For full information I'm also attaching error I had before I've uninstalled everything and tried again: Hub Transport Role Failed Error: The following error was generated when "$error.Clear(); install-ExsetdataAtom -AtomName SharedMachineSettings -DomainController $RoleDomainController" was run: "An error occurred with error code '2147950640' and message 'There is no such object on the server.'.". An error occurred with error code '2147950640' and message 'There is no such object on the server.'.

    Read the article

  • Search option: jqGrid + PHP

    - by Felix Guerrero
    Hi, I'm trying to get work this code: $("#list").jqGrid({ url: 'docente.php', datatype: 'json', mtype: 'POST', postData: {c : "", n: "", a: "", d: "", t: "", e: "", f: "", g: $('#selectD').value(), p: "", call: "report"}, colNames: ['C&eacute;dula','Nombres', 'Apellidos', 'Direcci&oacute;n', 'E-mail','Tel&eacute;fono', 'Profesi&oacute;n'], colModel: [ { name:'rows.cedula', index: 'cedula', search:true, jsonmap: 'cedula', width: 150, align: 'left', sortable:true}, { name:'rows.nombre', index: 'nombre', jsonmap: 'nombre', width: 150, align: 'left'}, { name:'rows.apellido', index: 'apellido', jsonmap: 'apellido', width: 240, align: 'left'}, { name:'rows.direccion', index: 'direccion', jsonmap: 'direccion', width: 330, align: 'left'}, { name:'rows.email', index: 'email', jsonmap: 'email',width: 200, align: 'left'}, { name:'rows.telefono', index: 'telefono', jsonmap: 'telefono', width: 170, align: 'left'}, { name:'rows.descripcion_profesion', index: 'descripcion_profesion', jsonmap: 'descripcion_profesion',width: 120, align: 'left'}], pager: '#pager', rowNum: 8, autowidth: true, rowList: [10, 20], sortname: 'cedula', sortorder: 'asc', viewrecords: true, caption: 'Docentes', jsonReader : { root: "rows", repeatitems: false }, height: 350, width: 900 }); $("#list").jqGrid('navGrid','#pager',{search:true, searchtext: "buscar",edit:false,add:false,del:false}); The HMTL I'm using: <div id="reporte"> <table id="list"></table> <div id="pager"> </div> <div> And the PHP code: $total_pages = 0; $limit=10; $count = Profesor::CountAll(); if($count> 0) $total_pages= ceil($count/$limit); else $total_pages=0; $cnx = new PDO("mysql:host=localhost;dbname=appsms","root",""); $rows = array(); $strQuery="select cedula, nombre, apellido, direccion, telefono, email, descripcion_profesion from Profesor join Profesion on " . " (profesor.profesion_id = profesion.id) and (profesor.grado_id_grado = '" .$this->grado . "') order by cedula;"; $stmt = $cnx->prepare($strQuery); $stmt->execute(array("reporte")); $rows = $stmt->fetchAll(PDO::FETCH_ASSOC); $response->page = 1; $response->total= $total_pages; $response->records = sizeof($rows); $i=0; foreach($rows as $result){ $response->rows[$i] = $result; $i++; } echo json_encode($response); The JSON I get: {"page":1,"total":1,"records":2, "rows":[{"cedula":"v-108984103","nombre":"Soneia","apellido":"Rond\u00f3n Contreras","direccion":"El Rosal, calle 2-44","telefono":"04544247008457","email":"foo@yahoo.es","descripcion_profesion":"Docente"}, {"cedula":"v-135254741","nombre":"Judith","apellido":"Rangel M\u00e1rquez","direccion":"Sabaneta","telefono":"04247644152499","email":"","descripcion_profesion":"Docente"}]} It loads the query from PHP but the search option doesn't work neither the sorting function on "cedula"'s column. What I need to do?. Thanks in advance.

    Read the article

  • glassfish v3.0 hangs no app is ever deployed and no error is ever shown

    - by Samuel Lopez
    I have a web app that uses JSF 2.0 with richFaces and primeFaces, hibernate and java and I use NetBeans 7.1.2 as the IDE when I run the app the glassfish server is started and the log shows this: Launching GlassFish on Felix platform Información: Running GlassFish Version: GlassFish Server Open Source Edition 3.1.2 (build 23) Información: Grizzly Framework 1.9.46 started in: 20ms - bound to [0.0.0.0:4848] Información: Grizzly Framework 1.9.46 started in: 32ms - bound to [0.0.0.0:8181] Información: Grizzly Framework 1.9.46 started in: 59ms - bound to [0.0.0.0:8080] Información: Grizzly Framework 1.9.46 started in: 32ms - bound to [0.0.0.0:3700] Información: Grizzly Framework 1.9.46 started in: 21ms - bound to [0.0.0.0:7676] Información: Registered org.glassfish.ha.store.adapter.cache.ShoalBackingStoreProxy for persistence-type = replicated in BackingStoreFactoryRegistry Información: SEC1002: Security Manager is OFF. Información: SEC1010: Entering Security Startup Service Información: SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper. Información: SEC1115: Realm [admin-realm] of classtype [com.sun.enterprise.security.auth.realm.file.FileRealm] successfully created. Información: SEC1115: Realm [file] of classtype [com.sun.enterprise.security.auth.realm.file.FileRealm] successfully created. Información: SEC1115: Realm [certificate] of classtype [com.sun.enterprise.security.auth.realm.certificate.CertificateRealm] successfully created. Información: SEC1011: Security Service(s) Started Successfully Información: WEB0169: Created HTTP listener [http-listener-1] on host/port [0.0.0.0:8080] Información: WEB0169: Created HTTP listener [http-listener-2] on host/port [0.0.0.0:8181] Información: WEB0169: Created HTTP listener [admin-listener] on host/port [0.0.0.0:4848] Información: WEB0171: Created virtual server [server] Información: WEB0171: Created virtual server [__asadmin] Información: WEB0172: Virtual server [server] loaded default web module [] Información: Inicializando Mojarra 2.1.6 (SNAPSHOT 20111206) para el contexto '/test' Información: Hibernate Validator 4.2.0.Final Información: WEB0671: Loading application [test] at [/test] Información: CORE10010: Loading application test done in 4,885 ms Información: GlassFish Server Open Source Edition 3.1.2 (23) startup time : Felix (1,848ms), startup services(5,600ms), total(7,448ms) Información: JMX005: JMXStartupService had Started JMXConnector on JMXService URL service:jmx:rmi://SJ007:8686/jndi/rmi://SJ007:8686/jmxrmi Información: WEB0169: Created HTTP listener [http-listener-1] on host/port [0.0.0.0:8080] Información: Grizzly Framework 1.9.46 started in: 14ms - bound to [0.0.0.0:8080] Información: WEB0169: Created HTTP listener [http-listener-2] on host/port [0.0.0.0:8181] Información: Grizzly Framework 1.9.46 started in: 12ms - bound to [0.0.0.0:8181] but right there it hangs and the deploy bar keeps running but no more actions are shown, nothing else is logged either it just stays there until I stop the deploy Is there any other error log to debug glassfish server? Any thoughts? I have re installed glassfish and NetBeans but it all seems the same. I think this started happening after I had to force-restart my computer with NetBeans stil open and the app deployed, but it's hard to know for sure if this was the real catalyst. Any thoughts or help is appreciated thanks. Is it an app error? if so why no errors in the log are shown?

    Read the article

  • Exception when deploying a JSR 286 portlet into WebLogic+WebCenter 11g

    - by Rambaldi
    I get the following exception when deploying a JSR 286 portlet into Oracle WebLogic Server 11g (to deploy it later in Oracle WebCenter 11g): <19-ene-2010 13H32' CET> <Error> <oracle.portlet.server.containerimpl.PortletApplicationImpl> <BEA-000000> <Error al procesar el archivo "/WEB-INF/portlet.xml" en la lÝnea 6 columna 68. org.xml.sax.SAXParseException: cvc-elt.1: Cannot find the declaration of element 'portlet-app' The error message is in spanish. It means: "Error processing the file "/WEB-INF/portlet.xml at line 6 column 68" The portlet.xml of my portlet seems to be correct and I've deployed it in other portal servers. So I don't understand the error message. This is the portlet.xml of my portlet (eclipse XML validator said it was a valid XML) <?xml version="1.0" encoding="UTF-8"?> <portlet-app version="2.0" xmlns="http://java.sun.com/xml/ns/portlet/portlet-app_2_0.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/portlet/portlet-app_2_0.xsd http://java.sun.com/xml/ns/portlet/portlet-app_2_0.xsd" xmlns:dnd="http://www.denodo.com/widget/portlet/portletjsr286"> <portlet> <description>Test Inter Portlet Communication (JSR286)</description> <portlet-name>Test IPC</portlet-name> <display-name>Test IPC</display-name> <portlet-class>com.denodo.ipc.TestIPCPortlet</portlet-class> <supports> <mime-type>text/html</mime-type> <portlet-mode>VIEW</portlet-mode> </supports> <supported-locale>en</supported-locale> <resource-bundle>PortletMessages</resource-bundle> <portlet-info> <title>Test IPC</title> <short-title>Test IPC</short-title> <keywords>Test IPC,Denodo</keywords> </portlet-info> </portlet> </portlet-app> How do I deploy my portlet I convert my portlet into to a WSRP portlet by executing java -jar wsrp-predeploy.jar source EAR target EAR as explained in http://download.oracle.com/docs/cd/E12839_01/webcenter.1111/e12405/wcadm_portlet_prod.htm#CHDECJHI) I try to deploy it into WebLogic with the WebLogic Console and I get this exception. My Environment WebCenter Suite (11.1.1.2.0) + WebLogic Server (10.3.2) downloaded from the oracle.com. Default configuration S.O: Windows XP SP3 Thanks in advance for your time.

    Read the article

  • Alpha plugin in GStreamer not working

    - by Miguel Escriva
    Hi! I'm trying to compose two videos, and I'm using the alpha plug-in to make the white color transparent. To test the alpha plug-in I'm creating the pipeline with gst-launch. The first test I done was: gst-launch videotestsrc pattern=smpte75 \ ! alpha method=custom target-r=255 target-g=255 target-b=255 angle=10 \ ! videomixer name=mixer ! ffmpegcolorspace ! autovideosink \ videotestsrc pattern=snow ! mixer. and it works great! Then I created two videos with those lines: gst-launch videotestsrc pattern=snow ! ffmpegcolorspace ! theoraenc ! oggmux ! filesink location=snow.ogv gst-launch videotestsrc pattern=smpte75 ! ffmpegcolorspace ! theoraenc ! oggmux ! filesink location=bars75.ogv And changed the videotestsrc to a filesrc and it continues working gst-launch filesrc location=bars75.ogv ! decodebin2 \ ! alpha method=custom target-r=255 target-g=255 target-b=255 angle=10 \ ! videomixer name=mixer ! ffmpegcolorspace ! autovideosink \ filesrc location=snow.ogv ! decodebin2 ! alpha ! mixer. But, when I use the ideo I want to compose, I'm not able to make the white color transparent gst-launch filesrc location=video.ogv ! decodebin2 \ ! alpha method=custom target-r=255 target-g=255 target-b=255 angle=10 \ ! videomixer name=mixer ! ffmpegcolorspace ! autovideosink \ filesrc location=snow.ogv ! decodebin2 ! alpha ! mixer. Can you help me? Any idea what is happening? I'm using GStreamer 0.10.28 You can download the test videos from here: http://polimedia.upv.es/pub/gst/gst.zip Thanks in advance, Miguel Escriva

    Read the article

  • Help with Windows 7 BSOD with windbg minidump !analyze -v results

    - by Kurt Harless
    Hi gang, Windows 7 X64 Ultimate is BSODing occasionally. I suspect an overheating issue or something related to the use of my GTX-295 card that runs very hot. Here is an !analyze -v listing of the most recent minidump. Any and all help greatly appreciated. Kurt Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\Windows\Minidump\122810-31387-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7600 MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7600.16617.amd64fre.win7_gdr.100618-1621 Machine Name: Kernel base = 0xfffff800`03065000 PsLoadedModuleList = 0xfffff800`032a2e50 Debug session time: Tue Dec 28 11:04:03.597 2010 (UTC - 7:00) System Uptime: 2 days 2:28:40.407 Loading Kernel Symbols ............................................................... ................................................................ .............................................. Loading User Symbols Loading unloaded module list ................ ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 3B, {c0000005, fffff800033b8873, fffff8800e322dc0, 0} Probably caused by : ntkrnlmp.exe ( nt!RtlCompareUnicodeStrings+c3 ) Followup: MachineOwner --------- 1: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* SYSTEM_SERVICE_EXCEPTION (3b) An exception happened while executing a system service routine. Arguments: Arg1: 00000000c0000005, Exception code that caused the bugcheck Arg2: fffff800033b8873, Address of the instruction which caused the bugcheck Arg3: fffff8800e322dc0, Address of the context record for the exception that caused the bugcheck Arg4: 0000000000000000, zero. Debugging Details: ------------------ EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s. FAULTING_IP: nt!RtlCompareUnicodeStrings+c3 fffff800`033b8873 488b7c2418 mov rdi,qword ptr [rsp+18h] CONTEXT: fffff8800e322dc0 -- (.cxr 0xfffff8800e322dc0) rax=0000000000000041 rbx=fffff8a015a3c1c0 rcx=0000000000000024 rdx=0000000000000003 rsi=fffff8800e3238b0 rdi=0000000000000009 rip=fffff800033b8873 rsp=fffff8800e323798 rbp=000000000000000d r8=fffff8a018cb374c r9=000000200a98fdc4 r10=fffff8800e323988 r11=fffff8800e32398e r12=fffff8a018127c18 r13=fffff8800126e550 r14=0000000000000001 r15=fffffa800abe1570 iopl=0 nv up ei pl nz ac po nc cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010216 nt!RtlCompareUnicodeStrings+0xc3: fffff800`033b8873 488b7c2418 mov rdi,qword ptr [rsp+18h] ss:0018:fffff880`0e3237b0=???????????????? Resetting default scope CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0x3B PROCESS_NAME: ccSvcHst.exe CURRENT_IRQL: 0 LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff800033b8873 STACK_TEXT: fffff880`0e323798 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!RtlCompareUnicodeStrings+0xc3 FOLLOWUP_IP: nt!RtlCompareUnicodeStrings+c3 fffff800`033b8873 488b7c2418 mov rdi,qword ptr [rsp+18h] SYMBOL_STACK_INDEX: 0 SYMBOL_NAME: nt!RtlCompareUnicodeStrings+c3 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 4c1c44a9 STACK_COMMAND: .cxr 0xfffff8800e322dc0 ; kb FAILURE_BUCKET_ID: X64_0x3B_nt!RtlCompareUnicodeStrings+c3 BUCKET_ID: X64_0x3B_nt!RtlCompareUnicodeStrings+c3 Followup: MachineOwner ---------

    Read the article

  • Debian Lenny syslog kernel messages

    - by andre
    Hello everyone. I've recently got a disk swap on my colo'd box. I've been getting these messages from the kernel (viewed on the terminal and later on /var/log/messages Mar 22 09:04:29 seedbox kernel: [72710.442831] Pid: 6527, comm: sshd Not tainted 2.6.26-2-amd64 #1 Mar 22 09:04:29 seedbox kernel: [72710.442831] RIP: 0010:[<ffffffff802876b9>] [<ffffffff802876b9>] page_remove_rmap+0xff/0x11a Mar 22 09:04:29 seedbox kernel: [72710.442831] RSP: 0018:ffff8100b75d1da8 EFLAGS: 00010246 Mar 22 09:04:29 seedbox kernel: [72710.442831] RAX: 0000000000000000 RBX: ffffe2000185e3e8 RCX: 0000000000008e53 Mar 22 09:04:29 seedbox kernel: [72710.442831] RDX: ffff810080a4c000 RSI: 0000000000000046 RDI: 0000000000000282 Mar 22 09:04:29 seedbox kernel: [72710.442831] RBP: ffff8100379838c8 R08: 00007f6d11ba4000 R09: ffff8100b75d1800 Mar 22 09:04:29 seedbox kernel: [72710.442831] R10: 0000000000000000 R11: 0000010000000010 R12: ffff8100bb446b00 Mar 22 09:04:29 seedbox kernel: [72710.442831] R13: 00007f6d11ba4000 R14: ffffe2000185e3e8 R15: ffff810001023b80 Mar 22 09:04:29 seedbox kernel: [72710.442831] FS: 0000000000000000(0000) GS:ffffffff8053d000(0000) knlGS:0000000000000000 Mar 22 09:04:29 seedbox kernel: [72710.442831] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Mar 22 09:04:29 seedbox kernel: [72710.442831] CR2: 00007f6d1195b480 CR3: 0000000037904000 CR4: 00000000000006e0 Mar 22 09:04:29 seedbox kernel: [72710.442831] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Mar 22 09:04:29 seedbox kernel: [72710.442831] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Mar 22 09:04:29 seedbox kernel: [72710.442831] Process sshd (pid: 6527, threadinfo ffff8100b75d0000, task ffff8100bd0a0990) Mar 22 09:04:29 seedbox kernel: [72710.442831] Stack: 800000006f65b045 800000006f65b045 ffff8100bc013d20 ffffffff8027f69a Mar 22 09:04:29 seedbox kernel: [72710.442831] ffff810100000000 0000000000000000 ffff8100b75d1eb8 ffffffffffffffff Mar 22 09:04:29 seedbox kernel: [72710.442831] 0000000000000000 ffff8100379838c8 ffff8100b75d1ec0 0000000000296460 Mar 22 09:04:29 seedbox kernel: [72710.442831] Call Trace: Mar 22 09:04:29 seedbox kernel: [72710.442831] [<ffffffff8027f69a>] ? unmap_vmas+0x4c9/0x885 Mar 22 09:04:29 seedbox kernel: [72710.442831] [<ffffffff80283ac8>] ? exit_mmap+0x7c/0xf0 Mar 22 09:04:29 seedbox kernel: [72710.442831] [<ffffffff80232538>] ? mmput+0x2c/0xa2 Mar 22 09:04:29 seedbox kernel: [72710.442831] [<ffffffff802378ad>] ? do_exit+0x25a/0x6a6 Mar 22 09:04:29 seedbox kernel: [72710.442831] [<ffffffff802afa45>] ? mntput_no_expire+0x20/0x117 Mar 22 09:04:29 seedbox kernel: [72710.442831] [<ffffffff80237d66>] ? do_group_exit+0x6d/0x9d Mar 22 09:04:29 seedbox kernel: [72710.442831] [<ffffffff80237da8>] ? sys_exit_group+0x12/0x16 Mar 22 09:04:29 seedbox kernel: [72710.442831] [<ffffffff8020beda>] ? system_call_after_swapgs+0x8a/0x8f Mar 22 09:04:29 seedbox kernel: [72710.442831] Mar 22 09:04:29 seedbox kernel: [72710.442831] Mar 22 09:04:29 seedbox kernel: [72710.442831] RSP <ffff8100b75d1da8> Mar 22 09:04:29 seedbox kernel: [72710.442831] ---[ end trace e8a2f3b263482c6e ]--- I don't know what the problem is or how to debug / track it, hope you guys can help.. let me know if you need more information.

    Read the article

  • jquery sortable item cached? #sortable items: '.class1' filter is not working when class is changed

    - by liz
    hello everyone, i came across a weird problem today: i created a sortable list of divs. each div has a class="class1" and items is set to 'class1' (see below simplified code). each div has an a href link that calls a function toggleLock. this function replaces class="class1" with class="locked" for that div. for example: will become the problem is: even though #sortable is set to "make" only items with class="class1" sortable, replacing the class still allows to be sortable. seems like item class is cached at some point. i've tried to refresh #sortable ($('#sortable').sortable("refreshPosition") and $('#sortable').sortable("");), but that didn't work. i've tried both ways of replacing the class: attr('class','lock') and removeClass(), then addClass(). still is sortable. if class is not changed dynamically, but loads into DOM as , then it's not sortable as expected. why wouldn't replacement of the class from class1 to locked prevent that div from being sortable? am i missing something? sample code: <div id="sortable"> <div class="class1" id="1"> <div class="sortHandle">....</div> <href="javascript:void(null);" onclick="toggleLock($(this).attr('id').replace('R',''));" id="R1">lock</a> <p>This is item 1</p> </div> <div class="class1" id="2"> <div class="sortHandle"></div> <href="javascript:void(null);" onclick="toggleLock($(this).attr('id').replace('R',''));" id="R2">lock</a> <p>This is item 2</p> </div> <div class="class1" id="3"> <div class="sortHandle"></div> <href="javascript:void(null);" onclick="toggleLock($(this).attr('id').replace('R',''));" id="R3">lock</a> <p>This is item 3</p> </div> </div> js: $(function() { $("#sortable").sortable({ items: '.class1', handle: '.sortHandle', cursor: 'move', start: function(e,ui) { el = e.target; startPos = ui.item.prevAll().length+1; }, update: function(event, ui) { data = $('.class1').sortable('toArray'); newPos = ui.item.prevAll().length+1; alert("position: "+startPos+"; newposition: "+newPos); } }).disableSelection(); });

    Read the article

  • Backbone.Marionette - Collection within CompositeView, which itself is nested in a CollectionView

    - by nicefinly
    *UPDATE: The problem probably involves the tour-template as I've discovered that it thinks the 'name' attribute is undefined. This leads me to think that it's not an array being passed on to the ToursView, but for some reason a string. * After studying similar questions on StackOverflow: How to handle nested CompositeView using Backbone.Marionette? How do you properly display a Backbone marionette collection view based on a model javascript array property? Nested collections with Backbone.Marionette ... and Derick Bailey's excellent blog's on this subject: http://lostechies.com/derickbailey/2012/04/05/composite-views-tree-structures-tables-and-more/ ... including the JSFiddle's: http://jsfiddle.net/derickbailey/AdWjU/ I'm still having trouble with a displaying the last node of a nested CollectionView of CompositeViews. It is the final CollectionView within each CompositeView that is causing the problem. CollectionView { CompositeView{ CollectionView {} //**<-- This is the troublemaker!** } } NOTE: I have already made a point of creating a valid Backbone.Collection given that the collection passed on to the final, child CollectionView is just a simple array. Data returned from the api to ToursList: [ { "id": "1", "name": "Venice", "theTours": "[ {'name': u'test venice'}, {'name': u'test venice 2'} ]" }, { "id": "2", "name": "Rome", "theTours": "[ {'name': u'Test rome'} ]" }, { "id": "3", "name": "Dublin", "theTours": "[ {'name': u'test dublin'}, {'name': u'test dublin 2'} ]" } ] I'm trying to nest these in a dropdown where the nav header is the 'name' (i.e. Dublin), and the subsequent li 's are the individual tour names (i.e. 'test dublin', 'test dublin2', etc.) Tour Models and Collections ToursByLoc = TastypieModel.extend({}); ToursList = TastypieCollection.extend({ model: ToursByLoc, url:'/api/v1/location/', }); Tour Views ToursView = Backbone.Marionette.ItemView.extend({ template: '#tour-template', tagName: 'li', }); ToursByLocView = Backbone.Marionette.CompositeView.extend({ template: '#toursByLoc-template', itemView: ToursView, initialize: function(){ //As per Derick Bailey's comments regarding the need to pass on a //valid Backbone.Collection to the child CollectionView //REFERENCE: http://stackoverflow.com/questions/12163118/nested-collections-with-backbone-marionette var theTours = this.model.get('theTours'); this.collection = new Backbone.Collection(theTours); }, appendHtml: function(collectionView, itemView){ collectionView.$('div').append(itemView.el); } }); ToursListView = Backbone.Marionette.CollectionView.extend({ itemView: ToursByLocView, }); Templates <script id="tour-template" type="text/template"> <%= name %> </script> <script id="toursByLoc-template" type="text/template"> <li class="nav-header"><%= name %></li> <div class="indTours"></div> <li class="divider"></li> </script>

    Read the article

  • Problem with running open office from the command line

    - by Devin Dixon
    Yesterday I installed OpenOffice on my Linux server. But when I go to run it through the command line, it says command cannot be found. I've also tried other things like OOWriter, etc. Has anyone had this problem? Installation process went like below: root@aserver [OOO330_m20_native_packed-1_en-US.9567/RPMS]# rpm -i *.rpm package openoffice.org-ure-1.7.0-9567.i586 is already installed package ooobasis3.3-core01-3.3.0-9567.i586 is already installed package ooobasis3.3-en-US-3.3.0-9567.i586 is already installed package ooobasis3.3-core02-3.3.0-9567.i586 is already installed package ooobasis3.3-core03-3.3.0-9567.i586 is already installed package ooobasis3.3-core04-3.3.0-9567.i586 is already installed package ooobasis3.3-core05-3.3.0-9567.i586 is already installed package ooobasis3.3-core06-3.3.0-9567.i586 is already installed package ooobasis3.3-core07-3.3.0-9567.i586 is already installed package ooobasis3.3-en-US-base-3.3.0-9567.i586 is already installed package ooobasis3.3-en-US-calc-3.3.0-9567.i586 is already installed package ooobasis3.3-en-US-draw-3.3.0-9567.i586 is already installed package ooobasis3.3-en-US-help-3.3.0-9567.i586 is already installed package ooobasis3.3-en-US-impress-3.3.0-9567.i586 is already installed package ooobasis3.3-en-US-math-3.3.0-9567.i586 is already installed package ooobasis3.3-en-US-res-3.3.0-9567.i586 is already installed package ooobasis3.3-en-US-writer-3.3.0-9567.i586 is already installed package ooobasis3.3-base-3.3.0-9567.i586 is already installed package ooobasis3.3-calc-3.3.0-9567.i586 is already installed package ooobasis3.3-draw-3.3.0-9567.i586 is already installed package ooobasis3.3-images-3.3.0-9567.i586 is already installed package openoffice.org3-3.3.0-9567.i586 is already installed package ooobasis3.3-impress-3.3.0-9567.i586 is already installed package ooobasis3.3-math-3.3.0-9567.i586 is already installed package ooobasis3.3-writer-3.3.0-9567.i586 is already installed package jre-1.6.0_22-fcs.i586 is already installed package ooobasis3.3-binfilter-3.3.0-9567.i586 is already installed package ooobasis3.3-en-US-binfilter-3.3.0-9567.i586 is already installed package ooobasis3.3-gnome-integration-3.3.0-9567.i586 is already installed package ooobasis3.3-graphicfilter-3.3.0-9567.i586 is already installed package ooobasis3.3-javafilter-3.3.0-9567.i586 is already installed package ooobasis3.3-kde-integration-3.3.0-9567.i586 is already installed package ooobasis3.3-onlineupdate-3.3.0-9567.i586 is already installed package ooobasis3.3-ooofonts-3.3.0-9567.i586 is already installed package ooobasis3.3-oooimprovement-3.3.0-9567.i586 is already installed package ooobasis3.3-ooolinguistic-3.3.0-9567.i586 is already installed package ooobasis3.3-pyuno-3.3.0-9567.i586 is already installed package ooobasis3.3-testtool-3.3.0-9567.i586 is already installed package ooobasis3.3-xsltfilter-3.3.0-9567.i586 is already installed package openoffice.org3-base-3.3.0-9567.i586 is already installed package openoffice.org3-calc-3.3.0-9567.i586 is already installed package openoffice.org3-dict-en-3.3.0-9567.i586 is already installed package openoffice.org3-dict-es-3.3.0-9567.i586 is already installed package openoffice.org3-dict-fr-3.3.0-9567.i586 is already installed package openoffice.org3-draw-3.3.0-9567.i586 is already installed package openoffice.org3-en-US-3.3.0-9567.i586 is already installed package openoffice.org3-impress-3.3.0-9567.i586 is already installed package openoffice.org3-math-3.3.0-9567.i586 is already installed package openoffice.org3-writer-3.3.0-9567.i586 is already installed root@aserver [OOO330_m20_native_p acked-1_en-US.9567/RPMS]# soffice bash: soffice: command not found

    Read the article

  • RAID 50 24Port Fast Writes Slow Reads - Ubuntu

    - by James
    What is going on here?! I am baffled. serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo dd if=/dev/zero of=/Volumes/MercuryInternal/test/test.fs bs=4096k count=10000 10000+0 records in 10000+0 records out 41943040000 bytes (42 GB) copied, 57.0948 s, 735 MB/s serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo dd if=/Volumes/MercuryInternal/test/test.fs of=/dev/null bs=4096k count=10000 10000+0 records in 10000+0 records out 41943040000 bytes (42 GB) copied, 116.189 s, 361 MB/s OF NOTE: My RAID50 is 3 sets of 8 disks. - This might not be the best config for SPEED. OS: Ubuntu 12.04.1 x64 Hardware Raid: RocketRaid 2782 - 24 Port Controller HardDriveType: Seagate Barracuda ES.2 1TB Drivers: v1.1 Open Source Linux Drivers. So 24 x 1TB drives, partitioned using parted. Filesystem is ext4. I/O scheduler WAS noop but have changed it to deadline with no seemingly performance benefit/cost. serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo gdisk -l /dev/sdb GPT fdisk (gdisk) version 0.8.1 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Disk /dev/sdb: 41020686336 sectors, 19.1 TiB Logical sector size: 512 bytes Disk identifier (GUID): 95045EC6-6EAF-4072-9969-AC46A32E38C8 Partition table holds up to 128 entries First usable sector is 34, last usable sector is 41020686302 Partitions will be aligned on 2048-sector boundaries Total free space is 5062589 sectors (2.4 GiB) Number Start (sector) End (sector) Size Code Name 1 2048 41015625727 19.1 TiB 0700 primary To me this should be working fine. I can't think of anything that would be causing this other then fundamental driver errors? I can't seem to get much/if any higher then the 361MB a second, is this hitting the "SATA2" link speed, which it shouldn't given it is a PCIe2.0 card. Or maybe some cacheing quirk - I do have Write Back enabled. Does anyone have any suggestions? Tests for me to perform? Or if you require more information, I am happy to provide it! This is a video fileserver for editing machines, so we have a preference for FAST reads over writes. I was just expected more from RAID 50 and 24 drives together... EDIT: (hdparm results) serveradmin@FILESERVER:/Volumes/MercuryInternal$ sudo hdparm -Tt /dev/sdb /dev/sdb: Timing cached reads: 17458 MB in 2.00 seconds = 8735.50 MB/sec Timing buffered disk reads: 884 MB in 3.00 seconds = 294.32 MB/sec EDIT2: (config details) Also, I am using a RAID block size of 256K. I was told a larger block size is better for larger (in my case large video) files. EDIT3: (Bonnie++ Results. Would love some guidance with this!)

    Read the article

  • How to make Linux reliably boot on multi-cpu machines?

    - by Adam Tabi
    I've got two machines, one with 4x12 AMD Opteron cores (AMD Opteron(tm) Processor 6176), one with 2x8 Xeon cores (HT disabled; Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz). On both machines I experience difficulties during boot of Linux using recent kernels. The system hangs during the initialization of the kernel, before or just when initramfs started initializing the hardware. The last thing which got displayed was a stacktrace like this: CPU: 31 PID: 0 Comm: swapper/31 Tainted: G D 3.11.6-hardened #11 Hardware name: Supermicro X9DRT-HF+/X9DRT-HF+, BIOS 3.00 07/08/2013 task: ffff880854695500 ti: ffff880854695a28 task.ti: ffff880854695a28 RIP: 0010:[<ffffffff8100a82e>] [<ffffffff8100a82e>] default_idle+0x6/0xe RSP: 0000:ffff8808546b3ec8 EFLAGS: 00000286 RAX: ffffffff8100a828 RBX: ffff880854695a28 RCX: 00000000ffffffff RDX: 0100000000000000 RSI: 0000000000000000 RDI: ffff88107fdec690 RBP: ffff8808546b3ec8 R08: 0000000000000000 R09: ffff880854695500 R10: ffff880854695500 R11: 0000000000000001 R12: ffff880854695a28 R13: ffff880854695a28 R14: ffff880854695a28 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88107fde0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000002b43256a960 CR3: 00000000016b5000 CR4: 00000000000607f0 Stack: ffff8808546b3ed8 ffffffff8100aec9 ffff8808546b3f10 ffffffff8109ce25 334ab55852ec7aef 000000000000001f ffffffff8102d6c0 0000000000000000 0000000000000000 ffff8808546b3f48 ffffffff810276e0 ffff8808546b3f28 Call Trace: [<ffffffff8100aec9>] arch_cpu_idle+0x20/0x2b [<ffffffff8109ce25>] cpu_startup_entry+0xed/0x138 [<ffffffff8102d6c0>] ? flat_init_apic_ldr+0x80/0x80 [<ffffffff810276e0>] start_secondary+0x2c9/0x2f8 I compiled the kernel myself and it works fine, if I boot with nolapic. Yet, only one core is used. Also, the kernel of RHEL6 seems to work fine. I suspect that there are some patches used to make things work. Using the kernel config file from RHEL6 and building a more recent kernel yields the same problems. On the Xeon machine, things got better by disabling Hyperthreading completely. The machine now boots successfully on at least 4 out of 5 times. And if it boots, multicore stuff works just fine. However, I'm wondering about what to do about the AMD machine. So to sum it up: Gentoo kernel 3.6 - 3.11 won't reliably boot those machines unless you reduce the amount of cores (e.g. via nolapic). RHEL6 kernel (which is 2.6.32) boots just fine. RH kernel config used to build a 3.x kernel won't yield a working kernel. Not distribution specific (apart from the kernel being used). These stack traces got printed every minute or so. The kernel seems to be stuck in an endless loop. Yet, a recent kernel is needed for various reasons. So the question is: What does the RHEL6 kernel do, what vanilla or gentoo kernels don't do? Is there a boot option that might lead to a reliable boot with all the cores enabled? Best, Adam

    Read the article

  • Vagrant reporting VirtualBox guest additions out of date

    - by DTest
    Fairly new to Vagrant, so bear with me if I don't understand the process. I downloaded a CentOS box off http://www.vagrantbox.es/ Started it up running VirtualBox 4.2.4 and got this message: [default] The guest additions on this VM do not match the install version of VirtualBox! This may cause things such as forwarded ports, shared folders, and more to not work properly. If any of those things fail on this machine, please update the guest additions and repackage the box. Guest Additions Version: 4.0.8 VirtualBox Version: 4.2.4 So I used the vbguest plugin to update the guest additions, then repackaged the box as suggested. Having replaced the old box and loading it up I get the same message about guest additions being outdated, but vbguest reports that they are up to date (the automatic vbguest update is disabled in my Vagrantfile): Vagrant::Config.run do |config| config.vm.box = "centos56_64" config.vbguest.auto_update = false config.vbguest.no_remote = true end And the commands: dtest$ vagrant up [default] Importing base box 'centos56_64'... [default] The guest additions on this VM do not match the install version of VirtualBox! This may cause things such as forwarded ports, shared folders, and more to not work properly. If any of those things fail on this machine, please update the guest additions and repackage the box. Guest Additions Version: 4.0.8 VirtualBox Version: 4.2.4 [default] Matching MAC address for NAT networking... [default] Clearing any previously set forwarded ports... [default] Forwarding ports... [default] -- 22 => 2222 (adapter 1) [default] Creating shared folders metadata... [default] Clearing any previously set network interfaces... [default] Booting VM... [default] Waiting for VM to boot. This can take a few minutes. [default] VM booted and ready for use! [default] Mounting shared folders... [default] -- v-root: /vagrant dtest$ vagrant vbguest --no-install [default] Detected Virtualbox Guest Additions 4.2.4 --- OK. [default] Virtualbox Guest Additions on host: 4.2.4 - guest's version is 4.2.4 Since they appear to be updated after an install, I could ignore the message. But is it possible to get rid of it?

    Read the article

  • XSLT apply templates in different order of xml reading.

    - by David
    I am new to this, so please bear with me... If we have the following xml fragment: <docXML> <PARRAFO orden='1' tipo='parrafo'> <dato> <etiqueta>Título</etiqueta> <tipo>TextBox</tipo> <valor>¿Cuándo solicitar el consejo genético?</valor> <longitud>1500</longitud> <comentario></comentario> <enlace></enlace> <target_enlace>I</target_enlace> </dato> <dato> <etiqueta>Texto</etiqueta> <tipo>Resumen</tipo> <valor>Resumen text</valor> <longitud>8000</longitud> <comentario></comentario> <enlace></enlace> <target_enlace></target_enlace> </dato> <dato> <etiqueta>Imagen</etiqueta> <tipo>TextBox</tipo> <valor>http://url/Imagenes/7D2BE6480CF4486CA288A75932606181.jpg</valor> <longitud>1500</longitud> <comentario></comentario> <enlace></enlace> <target_enlace>I</target_enlace> </dato> </PARRAFO> <PARRAFO orden='1' tipo='parrafo'> <dato> <etiqueta>Título</etiqueta> <tipo>TextBox</tipo> <valor>TextBox text</valor> <longitud>1500</longitud> <comentario></comentario> <enlace></enlace> <target_enlace>I</target_enlace> </dato> <dato> <etiqueta>Texto</etiqueta> <tipo>Resumen</tipo> <valor>Resumen text</valor> <longitud>8000</longitud> <comentario></comentario> <enlace></enlace> <target_enlace></target_enlace> </dato> </PARRAFO> </docXML> .. I am going to apply templates to each section depending on the value of the label "etiqueta" per node "dato" in "PARRAFO" by using the following XSLT: <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xsl" exclude-result-prefixes="msxsl"> <xsl:output method="html" encoding="iso-8859-1"/> <xsl:template match="/"> <xsl:variable name="xml-doc-parrafo" select="documentoXML/PARRAFO"/> <!-- PARRAFOS --> <xsl:choose> <xsl:when test="count($xml-doc-parrafo)>0"> <div class="seccion_1"> <xsl:for-each select="$xml-doc-parrafo"> <xsl:choose> <xsl:when test="self::node()[@tipo = 'parrafo']"> <div class="parrafo"> <xsl:for-each select="self::node()[@tipo = 'parrafo']/dato"> <xsl:variable name="dato" select="self::node()[@tipo = 'parrafo']/dato"/> <xsl:variable name="nextdato" select="following::dato[1]/@etiqueta"/> <xsl:choose> <xsl:when test="etiqueta = 'Título'"> <xsl:call-template name="imprimeTituloParrafo"> <xsl:with-param name="etiqueta" select="etiqueta"></xsl:with-param> <xsl:with-param name="valor" select="valor"></xsl:with-param> <xsl:with-param name="longitud" select="longitud"></xsl:with-param> <xsl:with-param name="comentario" select="comentario"></xsl:with-param> <xsl:with-param name="enlace" select="enlace"></xsl:with-param> <xsl:with-param name="target_enlace" select="target_enlace"></xsl:with-param> </xsl:call-template> </xsl:when> <xsl:when test="etiqueta = 'Subtitulo'"> <xsl:call-template name="imprimeSubtituloParrafo"> <xsl:with-param name="etiqueta" select="etiqueta"></xsl:with-param> <xsl:with-param name="valor" select="valor"></xsl:with-param> <xsl:with-param name="longitud" select="longitud"></xsl:with-param> <xsl:with-param name="comentario" select="comentario"></xsl:with-param> <xsl:with-param name="enlace" select="enlace"></xsl:with-param> <xsl:with-param name="target_enlace" select="target_enlace"></xsl:with-param> </xsl:call-template> </xsl:when> <xsl:when test="etiqueta = 'Imagen'"> <xsl:call-template name="imprimeImagenParrafo"> <xsl:with-param name="etiqueta" select="etiqueta"></xsl:with-param> <xsl:with-param name="valor" select="valor"></xsl:with-param> <xsl:with-param name="longitud" select="longitud"></xsl:with-param> <xsl:with-param name="comentario" select="comentario"></xsl:with-param> <xsl:with-param name="enlace" select="enlace"></xsl:with-param> <xsl:with-param name="target_enlace" select="target_enlace"></xsl:with-param> </xsl:call-template> </xsl:when> <xsl:when test="etiqueta = 'Pie Imagen'"> <xsl:call-template name="imprimePieImagenParrafo"> <xsl:with-param name="etiqueta" select="etiqueta"></xsl:with-param> <xsl:with-param name="valor" select="valor"></xsl:with-param> <xsl:with-param name="longitud" select="longitud"></xsl:with-param> <xsl:with-param name="comentario" select="comentario"></xsl:with-param> <xsl:with-param name="enlace" select="enlace"></xsl:with-param> <xsl:with-param name="target_enlace" select="target_enlace"></xsl:with-param> </xsl:call-template> </xsl:when> <xsl:when test="etiqueta = 'Texto'"> <xsl:call-template name="imprimeTextoParrafo"> <xsl:with-param name="etiqueta" select="etiqueta"></xsl:with-param> <xsl:with-param name="valor" select="valor"></xsl:with-param> <xsl:with-param name="longitud" select="longitud"></xsl:with-param> <xsl:with-param name="comentario" select="comentario"></xsl:with-param> <xsl:with-param name="enlace" select="enlace"></xsl:with-param> <xsl:with-param name="target_enlace" select="target_enlace"></xsl:with-param> </xsl:call-template> </xsl:when> <xsl:when test="etiqueta = 'Pie Parrafo'"> <xsl:call-template name="imprimePieParrafo"> <xsl:with-param name="etiqueta" select="etiqueta"></xsl:with-param> <xsl:with-param name="valor" select="valor"></xsl:with-param> <xsl:with-param name="longitud" select="longitud"></xsl:with-param> <xsl:with-param name="comentario" select="comentario"></xsl:with-param> <xsl:with-param name="enlace" select="enlace"></xsl:with-param> <xsl:with-param name="target_enlace" select="target_enlace"></xsl:with-param> </xsl:call-template> </xsl:when> </xsl:choose> </xsl:for-each> </div> </xsl:when> </xsl:choose> </xsl:for-each> </div> </xsl:when> <!-- si no hay resultados --> <xsl:otherwise> <br></br> <p style="text-align:center;">El documento no contiene datos.</p> </xsl:otherwise> </xsl:choose> </xsl:template> <xsl:template name="imprimeTituloParrafo"> <xsl:param name="etiqueta"></xsl:param> <xsl:param name="valor"></xsl:param> <xsl:param name="longitud"></xsl:param> <xsl:param name="enlace"></xsl:param> <xsl:param name="target_enlace"></xsl:param> <h2 class="titulo"> <xsl:choose> <xsl:when test="string-length($enlace) > 0"> <xsl:call-template name="imprimeEnlace"> <xsl:with-param name="valor" select="valor"></xsl:with-param> <xsl:with-param name="longitud" select="longitud"></xsl:with-param> <xsl:with-param name="comentario" select="comentario"></xsl:with-param> <xsl:with-param name="enlace" select="enlace"></xsl:with-param> <xsl:with-param name="target_enlace" select="target_enlace"></xsl:with-param> </xsl:call-template> </xsl:when> <xsl:otherwise> <xsl:value-of select="$valor"/> </xsl:otherwise> </xsl:choose> </h2> </xsl:template> <xsl:template name="imprimeSubtituloParrafo"> <xsl:param name="etiqueta"></xsl:param> <xsl:param name="valor"></xsl:param> <xsl:param name="longitud"></xsl:param> <xsl:param name="enlace"></xsl:param> <xsl:param name="target_enlace"></xsl:param> <h3 class="subtitulo"> <xsl:choose> <xsl:when test="string-length($enlace) > 0"> <xsl:call-template name="imprimeEnlace"> <xsl:with-param name="valor" select="valor"></xsl:with-param> <xsl:with-param name="longitud" select="longitud"></xsl:with-param> <xsl:with-param name="comentario" select="comentario"></xsl:with-param> <xsl:with-param name="enlace" select="enlace"></xsl:with-param> <xsl:with-param name="target_enlace" select="target_enlace"></xsl:with-param> </xsl:call-template> </xsl:when> <xsl:otherwise> <xsl:value-of select="$valor"/> </xsl:otherwise> </xsl:choose> </h3> </xsl:template> <xsl:template name="imprimeTextoParrafo"> <xsl:param name="etiqueta"></xsl:param> <xsl:param name="valor"></xsl:param> <xsl:param name="longitud"></xsl:param> <xsl:param name="enlace"></xsl:param> <xsl:param name="target_enlace"></xsl:param> <div class="texto"> <p class="texto"> <xsl:copy-of select="$valor/node()"/> </p> </div> </xsl:template> <xsl:template name="imprimeImagenParrafo"> <xsl:param name="etiqueta"></xsl:param> <xsl:param name="valor"></xsl:param> <xsl:param name="longitud"></xsl:param> <xsl:param name="comentario"></xsl:param> <xsl:param name="enlace"></xsl:param> <xsl:param name="target_enlace"></xsl:param> <xsl:choose> <xsl:when test="string-length($enlace) = 0"> <xsl:call-template name="imprimeImagen"> <xsl:with-param name="etiqueta" select="etiqueta"></xsl:with-param> <xsl:with-param name="valor" select="valor"></xsl:with-param> <xsl:with-param name="longitud" select="longitud"></xsl:with-param> <xsl:with-param name="comentario" select="comentario"></xsl:with-param> <xsl:with-param name="enlace" select="enlace"></xsl:with-param> <xsl:with-param name="target_enlace" select="target_enlace"></xsl:with-param> </xsl:call-template> </xsl:when> <xsl:otherwise> <a> <xsl:choose> <xsl:when test="$target_enlace/node() = 'E'"> <xsl:attribute name="target"> <xsl:text>_blank</xsl:text> </xsl:attribute> </xsl:when> <xsl:when test="$target_enlace/node() = 'I'"> <xsl:attribute name="target"> <xsl:text>_self</xsl:text> </xsl:attribute> </xsl:when> </xsl:choose> <xsl:attribute name="href"> <xsl:value-of select="$enlace"/> </xsl:attribute> <xsl:call-template name="imprimeImagen"> <xsl:with-param name="etiqueta" select="etiqueta"></xsl:with-param> <xsl:with-param name="valor" select="valor"></xsl:with-param> <xsl:with-param name="longitud" select="longitud"></xsl:with-param> <xsl:with-param name="comentario" select="comentario"></xsl:with-param> <xsl:with-param name="enlace" select="enlace"></xsl:with-param> <xsl:with-param name="target_enlace" select="target_enlace"></xsl:with-param> </xsl:call-template> </a> </xsl:otherwise> </xsl:choose> </xsl:template> <xsl:template name="imprimeImagen"> <xsl:param name="etiqueta"></xsl:param> <xsl:param name="valor"></xsl:param> <xsl:param name="longitud"></xsl:param> <xsl:param name="comentario"></xsl:param> <xsl:param name="enlace"></xsl:param> <xsl:param name="target_enlace"></xsl:param> <div class="imagen_pie"> <img> <xsl:attribute name="src"> <xsl:value-of select="$valor"/> </xsl:attribute> <xsl:attribute name="alt"> <xsl:value-of select="$comentario"/> </xsl:attribute> </img> </div> </xsl:template> <xsl:template name="imprimeEnlace"> <xsl:param name="valor"></xsl:param> <xsl:param name="longitud"></xsl:param> <xsl:param name="comentario"></xsl:param> <xsl:param name="enlace"></xsl:param> <xsl:param name="target_enlace"></xsl:param> <a> <xsl:choose> <xsl:when test="$target_enlace/node() = 'E'"> <xsl:attribute name="target"> <xsl:text>_blank</xsl:text> </xsl:attribute> </xsl:when> <xsl:when test="$target_enlace/node() = 'I'"> </xsl:when> <xsl:when test="$target_enlace/node() = 'D'"> </xsl:when> </xsl:choose> <xsl:attribute name="href"> <xsl:value-of select="enlace"/> </xsl:attribute> <xsl:value-of select="$valor"/> </a> </xsl:template> .... </xsl:stylesheet> I need to first apply the template image (if exists in this "PARRAFO") "Imagen" just before the text "Texto" Now apply the template text first and then the image because it is before the text node before the image as shown in xml Thanks a lot!

    Read the article

  • JqTouch - Detect trigger for animation

    - by majman
    Yet another problem I'm having w/ jqTouch... I'm trying to detect what element was clicked to trigger an animation so that I can pass parameters from the clicked item to the subsequent page. My HTML is: <div id="places"> <div class="toolbar"> <h1>Places</h1> <a class="back" href="#">Back</a> </div> <ul> <li id="1"><a href="#singleplace">Place 1</a></li> <li id="2"><a href="#singleplace">Place 2</a></li> <li id="3"><a href="#singleplace">Place 3</a></li> </ul> </div> <div id="singleplace"> <div class="toolbar"> <h1></h1> <a class="back" href="#">Back</a> </div> </div> When I click on any of the list items in #places, I'm able to slide over to #singleplace just fine, but I'm trying to detect which element was clicked so that I can pass parameters into the #singleplace div. My javascript is: var placeID; $('#places a').live('mouseup',function(){ $('#singleplace h1').html($(this).text()) placeID = $(this).parent().attr('id'); }) I've tried several alternatives to the $(el).live('event', fn()) approach including: $('#places a').live('click',fn()... $('#places a').live('mouseup',fn()... $('#places a').live('tap',fn()... $('#places a').tap(fn()... None of which seem to work. Is there a better way I could be handling this? I noticed on jqTouch's issues page, there is this: http://code.google.com/p/jqtouch/issues/detail?id=91 which may be part of the problem...

    Read the article

  • DVD playback with Windows Media Player 11 works fine, but when copied to HDD and then played back, t

    - by stakx
    I have several DVDs with short documentaries on it. Since the notebook I'm using (a Dell Latitude E6400) has only one DVD drive, and I might play back those short movies very often, I thought of copying them to the HDD and playing them back from there. However, I've run into a problem, namely stuttering audio. Problem description: When I play back these movies directly from DVD (with Windows Media Player 11 under Windows Vista), everything works fine. Smooth video, no significant audio problems (only the occasional click). But as soon as I copy any of these DVDs to the HDD and try to play them back from there (e.g. using the wmpdvd://drive/title/chapter?contentdir=path protocol, I get stuttering audio — audio playback sounds like a machine gun for a third of a second or so, approx. every 8 seconds. I have tried converting the VOB files from the DVD to another format (ie. ripping), but that resulted in a noticeable downgrade of picture quality. Therefore I thought it best to keep the files in their original format, if possible. Still, I suspect that the stuttering audio is due to some (de-)muxing problem, and that changing the file format might help. (After all, video playback is fine; therefore I don't think that the hardware is too slow for playback.) Only thing is, I don't know how to convert the VOB files to another Windows Media Player-compatible format without quality loss. I hope someone can help me, or give me further pointers on things I could try out to get HDD playback to work without the problem described. Some things I've tried so far, without any success: VOB2MPG, in order to convert the .vob file to a .mpg file. But that changes only the A/V container, not the content. No re-encoding takes place at all. Re-encoding with MPlayer/MEncoder. Lots of quality loss there, and I frankly haven't got the time to test all possible settings combinations available. Disabling all plug-ins, equalizers, etc. in Windows Media Player. Disabling all hardware acceleration on the audio playback device. Further info on the VOB files I'm trying to playback: The video format is MPEG ES, PAL 720x576 pixels @ 24/25 frames per second. The sound stream is uncompressed PCM, 16-bit stereo @ 48kHz. (Might it help if I somehow re-encoded the sound stream at a lower resolution, or as an MP3? If so, how would I do this without changing the video stream?) P.S.: I am limited to using Windows Media Player (11). (I previously tried MPlayer btw., but the video playback quality was surprisingly bad.)

    Read the article

  • Expression Too Complex In Access 2007

    - by Jazzepi
    When I try to run this query in Access through the ODBC interface into a MySQL database I get an "Expression too complex in query expression" error. The essential thing I'm trying to do is translate abbreviated names of languages into their full body English counterparts. I was curious if there was some way to "trick" access into thinking the expression is smaller with sub queries, or if someone else had a better idea of how to solve this problem. I thought about making a temporary table and doing a join on it, but that's not supported in Access SQL. Just as an FYI, the query worked fine until I added the big long IFF chain. I tested the query on a smaller IFF chain for three languages, and that wasn't an issue, so the problem definitely stems from the huge IFF chain (It's 26 deep). Also, I might be able to drop some of the options (like combining the different forms of Chinese or Portuguese) As a test, I was able to get the SQL query to work after paring it down to 14 IFF() statements, but that's a far cry from the 26 languages I'd like to represent. SELECT TOP 5 Count( * ) AS [Number of visits by language], IIf(login.lang="ar","Arabic",IIf(login.lang="bg","Bulgarian",IIf(login.lang="zh_CN","Chinese (Simplified Han)",IIf(login.lang="zh_TW","Chinese (Traditional Han)",IIf(login.lang="cs","Czech",IIf(login.lang="da","Danish",IIf(login.lang="de","German",IIf(login.lang="en_US","United States English",IIf(login.lang="en_GB","British English",IIf(login.lang="es","Spanish",IIf(login.lang="fr","French",IIf(login.lang="el","Greek",IIf(login.lang="it","Italian",IIf(login.lang="ko","Korean",IIf(login.lang="hu","Hungarian",IIf(login.lang="nl","Dutch",IIf(login.lang="pl","Polish",IIf(login.lang="pt_PT","European Portuguese",IIf(login.lang="pt_BR","Brazilian Portuguese",IIf(login.lang="ru","Russian",IIf(login.lang="sk","Slovak",IIf(login.lang="sl","Slovenian","IIf(login.lang="fi","Finnish",IIf(login.lang="sv","Swedish",IIf(login.lang="tr","Turkish","Unknown")))))))))))))))))))))))))) AS [Language] FROM login, reservations, reservation_users, schedules WHERE (reservations.start_date Between DATEDIFF('s','1970-01-01 00:00:00',[Starting Date in the Following Format YYYY/MM/DD]) And DATEDIFF('s','1970-01-01 00:00:00',[Ending Date in the Following Format YYYY/MM/DD])) And reservations.is_blackout=0 And reservation_users.memberid=login.memberid And reservation_users.resid=reservations.resid And reservation_users.invited=0 And reservations.scheduleid=schedules.scheduleid And scheduletitle=[Schedule Title] GROUP BY login.lang ORDER BY Count( * ) DESC; @ Michael Todd I completely agree. The list of languages should have been a table in the database and the login.lang should have been a FK into that table. Unfortunately this isn't how the database was written, and it's not really mine to modify. The languages are placed into the login.lang field by the PHP running on top of the database.

    Read the article

  • Css simple style dont work on IE but yes in any other browser

    - by DomingoSL
    Hello guys, i have a simple css file called Titulos.css who contain this: h1 { font: 50px Tahoma, Helvetica, Arial, Sans-Serif; text-align: center; color: #111; text-shadow: 0px 2px 3px #555; } h2 { font: 14px Tahoma, Helvetica, Arial, Sans-Serif; text-align: center; color: #CCC; text-shadow: 0px 1px 2px #555; } h3 { font: 10px Tahoma, Helvetica, Arial, Sans-Serif; text-align: center; color: #CCC; } b1 { font: 16px Tahoma, Helvetica, Arial, Sans-Serif; color: #DDD; } b2 { font: 10px Tahoma, Helvetica, Arial, Sans-Serif; color: #F9F7ED; } .caja { width: 690px; height: 40px; background-color: transparent; border: 0px solid #000000; font-size:x-large; color: #222; font-family: 'Trebuchet MS', 'Lucida Sans Unicode', 'Lucida Grande', 'Lucida Sans', Arial, sans-serif; font-weight: bold;" size="299"; } .style1 { text-align: right; } And a page who call this file like: <link rel="stylesheet" type="text/css" href="LIB/titulos.css" /> Later in this page im trying to use some of the styles like: <div id="todo" align="center" > <div id="cabeza" style="width:850px;height:100px"> </div> <div id="contenido" style="width:850px;height:420px;background-image: url(IMG/cuadro.png)" > <div id="titulo" style="width:765px;height:75px;padding-top: 18px;margin: auto;text-align: left;"> <b1>Bienvenido <b><?php echo($username); ?></b></b1><br> <?php $check = mysql_query("SELECT * FROM sms WHERE ref = '".$username."' ORDER BY fecha DESC LIMIT 0, 1") or die(mysql_error()); while($info = mysql_fetch_array( $check )) { echo("<b1> Tu ultimo mensaje enviado fue: </b1><b2>" . $info['texto'] . " enviado el " . $info['fecha'] . "</b2>"); That only a part of the code of course, the think is, Firefox and Chrome display the code above like this: that as you can see have the styles applied. But when i see the code from IE 8 (even 7 or 6) this is what you see: So, what do you think?

    Read the article

  • Suggestions for splitting server roles amongst Hyper-V virtual servers / RAID6 or RAID10? / AppAssure

    - by Anon
    We have 2 Hyper-V hosts at present running 1 virtual server that was converted from a physical box running all roles. My plan is to split the roles over various virtual machines, upgrading to the latest software versions as I go, and use the backup server as a standby in case the main server fails. AppAssure backup software has a feature called Virtual Standby, so the VHD's can be ready to be fired up on the backup server if necessary. Off-site backups will be done via external USB drive for now. I'm just seeking some input/suggestions into how I'm planning to split the roles out amongst various virtual servers. Also, I'm curious how to setup the storage on the servers. We do not have any NAS's, SAN'S or any budget for this. What would the best RAID level be to use? I'm thinking either RAID6 (which is currently used) however I'm concerned about the write speeds, or RAID10 but again I'm worried that I can only lose 1 drive (from the same mirror) as opposed to any 2 with RAID6. I realise I have a hot swap for this, but what if a further drive fails during a rebuild? Is the write penalty of RAID6 worth the extra reliability over RAID10? Or will it be too slow with all the roles I am planning, therefore RAID10 is my only real option? The reason for the needed redundancy is I am the only technician and I'm not always on-site. Options I've considered: 1) 5 drives in RAID6 set, 200gb for host OS, rest for VM storage. 1 drive for hot swap - this is how it is currently setup 2) 4 drives in RAID10 set, 200gb for host OS, rest for VM storage. 2 drives for hot swap 3) 4 drives in RAID10 set for VM storage, 2 drives in RAID1 set for host OS. No drives for hot swap - While this is probably the best option with the amount of drives I have, I don't like the idea of having no hot swap 4) 3 drives in RAID6 set for VM storage, 2 drives in RAID1 set for host OS. 1 drive for hot swap All options give us enough storage capacity for our files, etc. We don't have any budget for extra drives or extra hot swap HD chassis for the servers. We have about 70 clients and about 150 users. MAIN SERVER Intel Xeon 5520 @ 2.27 GHz (2 processors) 16GB RAM 6 x 1TB Seagate Barracuda ES.2 Enterprise SATA drives Intel SRCSATAWB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: DC01 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM DC02 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM Member Server - DHCP server, File server, Print server - 1GB RAM SCCM Member Server - 4GB RAM Third Party Software Member Server - A/V server, Ticketing software, etc - 4GB RAM Exchange 2007 - 4GB RAM - however we are probably migrating to a hosted solution, therefore freeing up resources BACKUP SERVER Intel Xeon E5410 @ 2.33GHz (2 processors) 16GB RAM 6 x 2TB WD RE4 SATA drives Intel SRCSASRB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: AppAssure backup software - 8GB RAM

    Read the article

  • Managing hosts and iptables in scalable architecture

    - by hakunin
    Let's say I have a load balancer in front of 3 app servers. Let's say I also have these services available at certain IPs: Postgres server Redis server ElasticSearch server Memcached server 1 Memcached server 2 Memcached server 3 So that's 6 nodes at 6 different IP addresses. Naturally, every one of my 3 app servers needs to talk to these 6 servers above. Then, to make it a bit funkier, I also have 3 worker servers. And each worker also talks to the above 6 servers, but thankfully workers and apps never need to talk to each other. Now's the kicker. Everything is on Digital Ocean VPS. What that means is: you have no private network, no private IPs. You only have separate, random IP address on each machine. You can't mask them or anything. So in order to build a secure environment I would have to configure some iptables. For example: Open app servers be accessed by load balancer server Open redis, ES, PG, and each memcached servers to be accessed by each app's IP and each worker's IP This means that every time I add an app or worker I have to also reconfigure iptables in those above 6 servers to welcome the new app or worker. Is there a way to simplify this type of setup? I was thinking — what if there was a gateway machine between apps/workers and the above 6 machines. This way all the interaction would always happen via the gateway server, and when I add a new app or worker I wouldn't need to teach the 6 servers to let it in. If I went this route, then I'd hope a small 512mb server could handle that perhaps, and there wouldn't be almost any overhead. Or would there? Please help with best way to handle this situation. I would appreciate an answer as concrete as possible. I don't think this is too specific, because this general architecture is very common, and Digital Ocean is becoming increasingly popular. A concrete solution here would be much appreciated by many.

    Read the article

  • emacs: how do I use edebug on code that is defined in a macro?

    - by Cheeso
    I don't even know the proper terminology for this lisp syntax, so I don't know if the words I'm using to ask the question, make sense. But the question makes sense, I'm sure. So let me just show you. cc-mode (cc-fonts.el) has things called "matchers" which are bits of code that run to decide how to fontify a region of code. That sounds simple enough, but the matcher code is in a form I don't completely understand, with babckticks and comma-atsign and just comma and so on, and furthermore it is embedded in a c-lang-defcost, which itself is a macro. And I want to run edebug on that code. Look: (c-lang-defconst c-basic-matchers-after "Font lock matchers for various things that should be fontified after generic casts and declarations are fontified. Used on level 2 and higher." t `(;; Fontify the identifiers inside enum lists. (The enum type ;; name is handled by `c-simple-decl-matchers' or ;; `c-complex-decl-matchers' below. ,@(when (c-lang-const c-brace-id-list-kwds) `((,(c-make-font-lock-search-function (concat "\\<\\(" (c-make-keywords-re nil (c-lang-const c-brace-id-list-kwds)) "\\)\\>" ;; Disallow various common punctuation chars that can't come ;; before the '{' of the enum list, to avoid searching too far. "[^\]\[{}();,/#=]*" "{") '((c-font-lock-declarators limit t nil) (save-match-data (goto-char (match-end 0)) (c-put-char-property (1- (point)) 'c-type 'c-decl-id-start) (c-forward-syntactic-ws)) (goto-char (match-end 0))))))) I am reading up on lisp syntax to figure out what those things are and what to call them, but aside from that, how can I run edebug on the code that follows the comment that reads ;; Fontify the identifiers inside enum lists. ? I know how to run edebug on a defun - just invoke edebug-defun within the function's definition, and off I go. Is there a corresponding thing I need to do to edebug the cc-mode matcher code forms?

    Read the article

  • Simple Form validation failing Backbone

    - by Corey Buchillon
    Im not exactly adept at coding so Im probably missing something, but my view here is failing to refuse submission when one or both of the fields are empty. I have a feeling something isnt connected right to my template for the row and the view of the form Form = Backbone.View.extend({ //form vie el: '.item-form', initialize: function(){ }, events: { 'click #additem': 'addModel' }, addModel: function(itemName, price){ // simple validation before adding to collection if (itemName !="" && price !="" ){ var item = new Item({ itemName: this.$("#item").val(), price: this.$("#price").val()}); items.add(item); $("#message").html("Please wait; the task is being added."); item.save(null, {success: function (item, response,options) { item.id= item.attributes._id.$id; item.attributes.id = item.attributes._id.$id; new ItemsView({collection: items}); $("#message").html(""); } }); this.$("#item").val(''); this.$("#price").val(''); } else { alert('Please fill in both fields'); } } }); and HTML <table class="itemTable"> <thead> <tr> <th>Item</th> <th>Price</th> <th></th> </tr> </thead> <tbody class="tableBody"> <script type="text/template" id="table-row"> <td><%= itemName %></td> <td><%= price %></td> <td><button class="complete">Complete</button> <button class="remove">Remove</button></td> </script> </tbody> </table> <form class="item-form"> <input type="text" name="item" id="item" placeholder="Item"/> <!-- goes to itemName in the template for the body --> <input type="text" name="price" id="price" placeholder="Price" /><!--goes to price in the template for the body --> <button type="button" id="additem">Add</button> </form> <div id="message"></div>

    Read the article

  • getting html tags from xml and echoing in php?

    - by Whitney Sarah Rogers
    I am trying to echo a result from xml into my html code form expedia. But I ran into a problem. There text is a little messed up: <areaInformation> Distances are calculated in a straight line from the property&apos;s location to the point of interest or attraction, and may not reflect actual travel distance. &lt;br /&gt;&lt;br /&gt; Distances are displayed to the nearest 0.1 mile and kilometre. &lt;p&gt;La Isla Shopping Mall - 0.5 km / 0.3 mi &lt;br /&gt;Yamil Lu&apos;um - 0.5 km / 0.3 mi &lt;br /&gt;Acuario Interactivo - 0.6 km / 0.3 mi &lt;br /&gt;Luxury Avenue - 1.5 km / 0.9 mi &lt;br /&gt;Cancun Golf Club at Pok Ta Pok - 2.2 km / 1.3 mi &lt;br /&gt;Nautilus Diving and Training Center - 2.6 km / 1.6 mi &lt;br /&gt;Cancun Convention Center - 2.8 km / 1.7 mi &lt;br /&gt;Plaza Caracol - 2.8 km / 1.8 mi &lt;br /&gt;Playa Tortuga - 3.1 km / 1.9 mi &lt;br /&gt;Aquaworld - 3.6 km / 2.2 mi &lt;br /&gt;Playa Langosta - 4.1 km / 2.6 mi &lt;br /&gt;Museo de Arte Popular Mexicano - 4.6 km / 2.9 mi &lt;br /&gt;Playa Linda - 5 km / 3.1 mi &lt;br /&gt;Playa Delfines - 6.1 km / 3.8 mi &lt;br /&gt;El Rey Ruins - 6.2 km / 3.8 mi &lt;br /&gt;&lt;/p&gt;&lt;p&gt;The preferred airport for ME Cancun - Complete ME All Inclusive is Cancun, Quintana Roo (CUN-Cancun Intl.) - 14.3 km / 8.9 mi. &lt;/p&gt; </areaInformation> And I echo it in php: <div id="hotelInfo"><?php echo $areaInfo ?></div> And of course I get this in the browser window: Distances are calculated in a straight line from the property's location to the point of interest or attraction, and may not reflect actual travel distance. <br /><br /> Distances are displayed to the nearest 0.1 mile and kilometre. <p>La Isla Shopping Mall - 0.5 km / 0.3 mi <br />Yamil Lu'um - 0.5 km / 0.3 mi <br />Acuario Interac etc. How can I fix this??? Any help would be greatly apreciated! Thanks!

    Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >