Search Results

Search found 16386 results on 656 pages for 'flash drive'.

Page 90/656 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• External HDD USB 3.0 failure

  - by Philip

  [ 2560.376113] usb 9-1: new high-speed USB device number 2 using xhci_hcd [ 2560.376186] usb 9-1: Device not responding to set address. [ 2560.580136] usb 9-1: Device not responding to set address. [ 2560.784104] usb 9-1: device not accepting address 2, error -71 [ 2560.840127] hub 9-0:1.0: unable to enumerate USB device on port 1 [ 2561.080182] usb 10-1: new SuperSpeed USB device number 5 using xhci_hcd [ 2566.096163] usb 10-1: device descriptor read/8, error -110 [ 2566.200096] usb 10-1: new SuperSpeed USB device number 5 using xhci_hcd [ 2571.216175] usb 10-1: device descriptor read/8, error -110 [ 2571.376138] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2571.744174] usb 10-1: new SuperSpeed USB device number 7 using xhci_hcd [ 2576.760116] usb 10-1: device descriptor read/8, error -110 [ 2576.864074] usb 10-1: new SuperSpeed USB device number 7 using xhci_hcd [ 2581.880153] usb 10-1: device descriptor read/8, error -110 [ 2582.040123] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2582.224139] hub 9-0:1.0: unable to enumerate USB device on port 1 [ 2582.464177] usb 10-1: new SuperSpeed USB device number 9 using xhci_hcd [ 2587.480122] usb 10-1: device descriptor read/8, error -110 [ 2587.584079] usb 10-1: new SuperSpeed USB device number 9 using xhci_hcd [ 2592.600150] usb 10-1: device descriptor read/8, error -110 [ 2592.760134] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2593.128175] usb 10-1: new SuperSpeed USB device number 11 using xhci_hcd [ 2598.144183] usb 10-1: device descriptor read/8, error -110 [ 2598.248109] usb 10-1: new SuperSpeed USB device number 11 using xhci_hcd [ 2603.264171] usb 10-1: device descriptor read/8, error -110 [ 2603.480157] usb 10-1: new SuperSpeed USB device number 12 using xhci_hcd [ 2608.496162] usb 10-1: device descriptor read/8, error -110 [ 2608.600091] usb 10-1: new SuperSpeed USB device number 12 using xhci_hcd [ 2613.616166] usb 10-1: device descriptor read/8, error -110 [ 2613.832170] usb 10-1: new SuperSpeed USB device number 13 using xhci_hcd [ 2618.848135] usb 10-1: device descriptor read/8, error -110 [ 2618.952079] usb 10-1: new SuperSpeed USB device number 13 using xhci_hcd [ 2623.968155] usb 10-1: device descriptor read/8, error -110 [ 2624.184176] usb 10-1: new SuperSpeed USB device number 14 using xhci_hcd [ 2629.200124] usb 10-1: device descriptor read/8, error -110 [ 2629.304075] usb 10-1: new SuperSpeed USB device number 14 using xhci_hcd [ 2634.320172] usb 10-1: device descriptor read/8, error -110 [ 2634.424135] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2634.776186] usb 10-1: new SuperSpeed USB device number 15 using xhci_hcd [ 2639.792105] usb 10-1: device descriptor read/8, error -110 [ 2639.896090] usb 10-1: new SuperSpeed USB device number 15 using xhci_hcd [ 2644.912172] usb 10-1: device descriptor read/8, error -110 [ 2645.128174] usb 10-1: new SuperSpeed USB device number 16 using xhci_hcd [ 2650.144160] usb 10-1: device descriptor read/8, error -110 [ 2650.248062] usb 10-1: new SuperSpeed USB device number 16 using xhci_hcd [ 2655.264120] usb 10-1: device descriptor read/8, error -110 [ 2655.480182] usb 10-1: new SuperSpeed USB device number 17 using xhci_hcd [ 2660.496121] usb 10-1: device descriptor read/8, error -110 [ 2660.600086] usb 10-1: new SuperSpeed USB device number 17 using xhci_hcd [ 2665.616167] usb 10-1: device descriptor read/8, error -110 [ 2665.832177] usb 10-1: new SuperSpeed USB device number 18 using xhci_hcd [ 2670.848110] usb 10-1: device descriptor read/8, error -110 [ 2670.952066] usb 10-1: new SuperSpeed USB device number 18 using xhci_hcd [ 2675.968081] usb 10-1: device descriptor read/8, error -110 [ 2676.072124] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2786.104531] xhci_hcd 0000:02:00.0: remove, state 4 [ 2786.104546] usb usb10: USB disconnect, device number 1 [ 2786.104686] xHCI xhci_drop_endpoint called for root hub [ 2786.104692] xHCI xhci_check_bandwidth called for root hub [ 2786.104942] xhci_hcd 0000:02:00.0: USB bus 10 deregistered [ 2786.105054] xhci_hcd 0000:02:00.0: remove, state 4 [ 2786.105065] usb usb9: USB disconnect, device number 1 [ 2786.105176] xHCI xhci_drop_endpoint called for root hub [ 2786.105181] xHCI xhci_check_bandwidth called for root hub [ 2786.109787] xhci_hcd 0000:02:00.0: USB bus 9 deregistered [ 2786.110134] xhci_hcd 0000:02:00.0: PCI INT A disabled [ 2794.268445] pci 0000:02:00.0: [1b73:1000] type 0 class 0x000c03 [ 2794.268483] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x0000ffff] [ 2794.268689] pci 0000:02:00.0: PME# supported from D0 D3hot [ 2794.268700] pci 0000:02:00.0: PME# disabled [ 2794.276383] pci 0000:02:00.0: BAR 0: assigned [mem 0xd7800000-0xd780ffff] [ 2794.276398] pci 0000:02:00.0: BAR 0: set to [mem 0xd7800000-0xd780ffff] (PCI address [0xd7800000-0xd780ffff]) [ 2794.276419] pci 0000:02:00.0: no hotplug settings from platform [ 2794.276658] xhci_hcd 0000:02:00.0: enabling device (0000 -> 0002) [ 2794.276675] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2794.276762] xhci_hcd 0000:02:00.0: setting latency timer to 64 [ 2794.276771] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2794.276913] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 2794.395760] xhci_hcd 0000:02:00.0: irq 16, io mem 0xd7800000 [ 2794.396141] xHCI xhci_add_endpoint called for root hub [ 2794.396144] xHCI xhci_check_bandwidth called for root hub [ 2794.396195] hub 9-0:1.0: USB hub found [ 2794.396203] hub 9-0:1.0: 1 port detected [ 2794.396305] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2794.396371] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10 [ 2794.396496] xHCI xhci_add_endpoint called for root hub [ 2794.396499] xHCI xhci_check_bandwidth called for root hub [ 2794.396547] hub 10-0:1.0: USB hub found [ 2794.396553] hub 10-0:1.0: 1 port detected [ 2798.004084] usb 1-3: new high-speed USB device number 8 using ehci_hcd [ 2798.140824] scsi21 : usb-storage 1-3:1.0 [ 2820.176116] usb 1-3: reset high-speed USB device number 8 using ehci_hcd [ 2824.000526] scsi 21:0:0:0: Direct-Access BUFFALO HD-PZU3 0001 PQ: 0 ANSI: 6 [ 2824.002263] sd 21:0:0:0: Attached scsi generic sg2 type 0 [ 2824.003617] sd 21:0:0:0: [sdb] 1953463728 512-byte logical blocks: (1.00 TB/931 GiB) [ 2824.005139] sd 21:0:0:0: [sdb] Write Protect is off [ 2824.005149] sd 21:0:0:0: [sdb] Mode Sense: 1f 00 00 08 [ 2824.009084] sd 21:0:0:0: [sdb] No Caching mode page present [ 2824.009094] sd 21:0:0:0: [sdb] Assuming drive cache: write through [ 2824.011944] sd 21:0:0:0: [sdb] No Caching mode page present [ 2824.011952] sd 21:0:0:0: [sdb] Assuming drive cache: write through [ 2824.049153] sdb: sdb1 [ 2824.051814] sd 21:0:0:0: [sdb] No Caching mode page present [ 2824.051821] sd 21:0:0:0: [sdb] Assuming drive cache: write through [ 2824.051825] sd 21:0:0:0: [sdb] Attached SCSI disk [ 2839.536624] usb 1-3: USB disconnect, device number 8 [ 2844.620178] usb 10-1: new SuperSpeed USB device number 2 using xhci_hcd [ 2844.640281] scsi22 : usb-storage 10-1:1.0 [ 2850.326545] scsi 22:0:0:0: Direct-Access BUFFALO HD-PZU3 0001 PQ: 0 ANSI: 6 [ 2850.327560] sd 22:0:0:0: Attached scsi generic sg2 type 0 [ 2850.329561] sd 22:0:0:0: [sdb] 1953463728 512-byte logical blocks: (1.00 TB/931 GiB) [ 2850.329889] sd 22:0:0:0: [sdb] Write Protect is off [ 2850.329897] sd 22:0:0:0: [sdb] Mode Sense: 1f 00 00 08 [ 2850.330223] sd 22:0:0:0: [sdb] No Caching mode page present [ 2850.330231] sd 22:0:0:0: [sdb] Assuming drive cache: write through [ 2850.331414] sd 22:0:0:0: [sdb] No Caching mode page present [ 2850.331423] sd 22:0:0:0: [sdb] Assuming drive cache: write through [ 2850.384116] usb 10-1: USB disconnect, device number 2 [ 2850.392050] sd 22:0:0:0: [sdb] Unhandled error code [ 2850.392056] sd 22:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2850.392061] sd 22:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 2850.392074] end_request: I/O error, dev sdb, sector 0 [ 2850.392079] quiet_error: 70 callbacks suppressed [ 2850.392082] Buffer I/O error on device sdb, logical block 0 [ 2850.392194] ldm_validate_partition_table(): Disk read failed. [ 2850.392271] Dev sdb: unable to read RDB block 0 [ 2850.392377] sdb: unable to read partition table [ 2850.392581] sd 22:0:0:0: [sdb] READ CAPACITY failed [ 2850.392584] sd 22:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2850.392588] sd 22:0:0:0: [sdb] Sense not available. [ 2850.392613] sd 22:0:0:0: [sdb] Asking for cache data failed [ 2850.392617] sd 22:0:0:0: [sdb] Assuming drive cache: write through [ 2850.392621] sd 22:0:0:0: [sdb] Attached SCSI disk [ 2850.732182] usb 10-1: new SuperSpeed USB device number 3 using xhci_hcd [ 2850.752228] scsi23 : usb-storage 10-1:1.0 [ 2851.752709] scsi 23:0:0:0: Direct-Access BUFFALO HD-PZU3 0001 PQ: 0 ANSI: 6 [ 2851.754481] sd 23:0:0:0: Attached scsi generic sg2 type 0 [ 2851.756576] sd 23:0:0:0: [sdb] 1953463728 512-byte logical blocks: (1.00 TB/931 GiB) [ 2851.758426] sd 23:0:0:0: [sdb] Write Protect is off [ 2851.758436] sd 23:0:0:0: [sdb] Mode Sense: 1f 00 00 08 [ 2851.758779] sd 23:0:0:0: [sdb] No Caching mode page present [ 2851.758787] sd 23:0:0:0: [sdb] Assuming drive cache: write through [ 2851.759968] sd 23:0:0:0: [sdb] No Caching mode page present [ 2851.759977] sd 23:0:0:0: [sdb] Assuming drive cache: write through [ 2851.817710] sdb: sdb1 [ 2851.820562] sd 23:0:0:0: [sdb] No Caching mode page present [ 2851.820568] sd 23:0:0:0: [sdb] Assuming drive cache: write through [ 2851.820572] sd 23:0:0:0: [sdb] Attached SCSI disk [ 2852.060352] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.076533] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.076538] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.196329] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.212593] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.212599] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.456290] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.472402] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.472408] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.624304] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.640531] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.640536] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.772296] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.788536] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.788541] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.920349] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.936536] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.936540] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2853.072287] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2853.088565] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2853.088570] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.176339] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.192561] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.192567] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.320349] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.336526] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.336531] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.468344] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.484551] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.484556] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.612349] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.628540] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.628545] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.756350] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.772528] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.772533] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.848116] usb 10-1: USB disconnect, device number 3 [ 2884.851493] scsi 23:0:0:0: [sdb] killing request [ 2884.851501] scsi 23:0:0:0: [sdb] killing request [ 2884.851699] scsi 23:0:0:0: [sdb] Unhandled error code [ 2884.851702] scsi 23:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2884.851708] scsi 23:0:0:0: [sdb] CDB: Read(10): 28 00 00 5f 2b ee 00 00 3e 00 [ 2884.851721] end_request: I/O error, dev sdb, sector 6237166 [ 2884.851726] Buffer I/O error on device sdb1, logical block 6237102 [ 2884.851730] Buffer I/O error on device sdb1, logical block 6237103 [ 2884.851738] Buffer I/O error on device sdb1, logical block 6237104 [ 2884.851741] Buffer I/O error on device sdb1, logical block 6237105 [ 2884.851744] Buffer I/O error on device sdb1, logical block 6237106 [ 2884.851747] Buffer I/O error on device sdb1, logical block 6237107 [ 2884.851750] Buffer I/O error on device sdb1, logical block 6237108 [ 2884.851753] Buffer I/O error on device sdb1, logical block 6237109 [ 2884.851757] Buffer I/O error on device sdb1, logical block 6237110 [ 2884.851807] scsi 23:0:0:0: [sdb] Unhandled error code [ 2884.851810] scsi 23:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2884.851813] scsi 23:0:0:0: [sdb] CDB: Read(10): 28 00 00 5f 2c 2c 00 00 3e 00 [ 2884.851824] end_request: I/O error, dev sdb, sector 6237228 [ 2885.168190] usb 10-1: new SuperSpeed USB device number 4 using xhci_hcd [ 2885.188268] scsi24 : usb-storage 10-1:1.0 Please help me with my problem. I got this after running dmesg.

  Read the article

• External API function calls AS3 control timeline

  - by giles

  I have function problem using this code (below), the embedded flash movieclip disappears or completely prevents the scrollto.js query to function in DW cs3. Communication between Flash and JavaScript is without problems, it is the call back I can't find to work and more frustratingly, should be simple, as no values are not required. So far, this has been hours of scouring the net without a workable end in sight...ahrr. What is a function for this to work? JavaScript – to call Flash event from HTML button link, placed between head tags function callExternalInterface() var flashMovie = window.document.menu; flashMovie.menu_up(value); menu_up is the string. Does anyone know of workable function for callback?? HTML <div id="btn_up"><a href="#top" name="charDev" id="charDev" onclick="">top</a></div> Pane navigation div that uses Scrollto.js query, and it's this link I need calling back to the embedded "menubtns.swf" (nested in "AS3Menu_javascript.swf") to play 5 frames of this movieclip, via a JS function. Embedded .swf code, using swfobject.js with allowScriptAccess=always <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" name="menu"<br/> width="251" height="251" id="menu"> <param name="movie" value="../~Assets/Flash/AS3Menu_javascript.swf" /> <param name="allowScriptAccess" value="always" /> <param name="movie" value="ExternalInterfaceScript.swf" /> <param name="quality" value="high" /> <object type="application/x-shockwave-flash" data="../~Assets/Flash/AS3Menu_javascript.swf" width="250" height="250"> <p>Alternative content</p> </object> </object> AS3 / Flash import flash.external.ExternalInterface;flash.system.Security.allowDomain(/sourceDomain/); ExternalInterface.addCallBack("menu_up", this, resetmenu); function resetmenu(){ gotoAndPlay:("frame label" / "number") }

  Read the article

• How to let hard drive sleep in RAID1 configuration?

  - by Al Kepp

  Normally in Windows 7 a hard drive stops spinning when it is not used for a longer while. This can be configured in Windows and I use it on computers which are turned on 24/7 but not used much often. My problem is on a computer with Intel X79 chipset with an integrated RAID controller. There is Windows 7 installed on an SSD drive, and there is RAID1 array with two SATA HDD drives for data. Those SATA drives aren't used much so I'd like to let them sleep (i.e stop spinning). But they ignore settings in Windows. How to let them sleep when using RAID1? It seems to me that those drives are "unstoppable", they are spinning 24/7 even when they aren't used at all. Maybe they would behave normally if I used Windows-based software RAID, but I use hardware RAID controller. Is there a way to let them stop spinning and sleep after for example 3 or 5 hours of inactivity (i.e. the same way as they would behave in Windows without RAID)?

  Read the article

• How can I write directly to my Zune HD hard drive?

  - by iamgoat

  When syncing photos to the Zune HD it resizes them down to a much lower resolution which means I cannot load a high res picture on it (comic book) and zoom in to read it. This defeats the whole purpose of having a zoom feature. There is a registry hack you can make to get the Zune to display under My Computer. Then if you killed the zune process while it's syncing you'd be able to access it like a hard drive and copy files to it. It seems like the more recent firmware and/or Zune software version now prevents this. How can I treat it like an HDD and copy files to it? I simply want to take my original pictures folder and copy it over the low resolution versions the Zune software resized it to. An alternative option would be to remove the hard drive from it and see if I can connect it to a computer directly, but I just got this and don't want to disassemble it yet. Note to Microsoft: Why do you allow me to set the encoding quality of music, but not photos?

  Read the article

• Can a folder on a NAS be made available as a physical drive in VMWare?

  - by asbjornu

  We are currently in the process of moving from a single web server to two load balanced web servers and are facing some challenges we don't quite know how to fix. One of these is that the current single server hosts applications that write stuff to disk. The applications running on the server expects that when something is written to disk it later will in fact exist, so it's important that this premise is fulfilled with the dual server architecture as well. The dual server setup is a couple of VMWare instances with Windows Server 2008 R2 as the guest operating system. Out of the box, these instances does not share any kind of file system, so just moving the applications over would make them break since one instance would write something to the file system that doesn't exist on the other. Thus we need to share a file system between the two virtual servers. Our host has proposed to create a network share on a SAN and map this share individually on each virtual machine. This doesn't work too well due to NTFS permissions, etc., because the share needs to be accessed by several independent web applications that won't even be in the same application pool. The only solution that kind of works is to hard code an "identity" for each web application into its web.config file, but this means password in clear text which doesn't sit well with me. Since the servers are virtual, I'm thinknig: Wouldn't it be possible to make a NAS area available as a physical disk in the gues operating system somehow? Since VMWare has full control of the virtual hardware, you'd think it would be able to "fake" a local hard drive in the virtual machine that in reality is a folder on a NAS, but so far I haven't found anything that states how and if this is possible. So I have to ask the wonderful Server Fault community: Can a folder on a NAS be made available as a physical drive (typical D:) in both of the virtual machines?

  Read the article

• How can I wipe my iPod classic and fix any bad sectors on the hard drive without killing it?

  - by Sam Meldrum

  My iPod never finishes syncing and only syncs audio, not pictures or video. Any ideas as to how I can fix it? My iPod classic 160GB worked well for a couple of years. I used to sync a lot of photos at full resolution to it, but this recently stopped working after I moved to Windows 7. iTunes is on latest version - 9.1.1.12 iPod software is up to date - 1.1.2 Windows 7 is fully up to date and patched The symptoms are that the iPod will start to sync, all audio (music and podcasts will sync successfully) but the syncing will then just appear to continue - itunes message: Syncing iPod. Do not Disconnect. This sync never completes - I have left it trying for days. I have tried resetting the iPod using the Restore button, whereupon it restarts sync from default options and again will sync audio, but nothing else. I suspect that something has gone wrong on the hard-drive - either a bad sector or some corrupt data. Is there a process I can go through to fix this? E.g. SpinRite or a format? If so how do I go about formatting an iPod and will it be recognised as an iPod after format and work as normal? Any advice on what to try next much appreciated? Update I have eliminated problems with the files, PC or iTunes as they sync fine to other iPods. I have also eliminated the cable by trying different cables which work with other iPods. What I'd really like to know is if there is any way to more fundamentally wipe the iPod safely, attempt to repair any bad sectors on the hard drive and then start from scratch. Anyone ever managed this?

  Read the article

• how can i move ext3 partition to the beginning of drive without losing data?

  - by Felipe Alvarez

  I have a 500GB external drive. It had two partitions, each around 250GB. I removed the first partition. I'd like to move the 2nd to the left, so it consumes 100% of the drive. How can this be accomplished without any GUI tools (CLI only)? fdisk Disk /dev/sdd: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc80b1f3d Device Boot Start End Blocks Id System /dev/sdd2 29374 60801 252445410 83 Linux parted Model: ST350032 0AS (scsi) Disk /dev/sdd: 500GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 2 242GB 500GB 259GB primary ext3 type=83 dumpe2fs Filesystem volume name: extstar Last mounted on: <not available> Filesystem UUID: f0b1d2bc-08b8-4f6e-b1c6-c529024a777d Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal dir_index filetype needs_recovery sparse_super large_file Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 15808608 Block count: 63111168 Reserved block count: 0 Free blocks: 2449985 Free inodes: 15799302 First block: 0 Block size: 4096 Fragment size: 4096 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8208 Inode blocks per group: 513 Filesystem created: Mon Feb 15 08:07:01 2010 Last mount time: Fri May 21 19:31:30 2010 Last write time: Fri May 21 19:31:30 2010 Mount count: 5 Maximum mount count: 29 Last checked: Mon May 17 14:52:47 2010 Check interval: 15552000 (6 months) Next check after: Sat Nov 13 14:52:47 2010 Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: d0363517-c095-4f53-baa7-7428c02fbfc6 Journal backup: inode blocks Journal size: 128M

  Read the article

• Win 7 crashes, PC reboots and says "Hard drive 0 not found" until I turn if off and on again

  - by Danny T.

  I recently made the move from Windows XP to Windows 7. Since then, when my computer is on for a few hours it always ends up rebooting without warning. Then the BIOS won't recognize my hard drive (hard drive 0 not found). If I turn off my computer and then on again, it boots normally. Some details: Dell Dimension 9150 Windows 7 I updated the BIOS I updated all system drivers with the latest version from Dell (SATA, Chipset, etc.) Other drivers updated too (Graphic card, sound, etc.) There is one thing that I tried after some Googling: I turned off the DMA access to the drives, but it's still rebooting after a few hours. Any clue? UPDATE 2010/12/13 Here are the events from the Event Log for today, from when I turned the computer on until it crashed: 19:17 - Error - ID 10016 - DistributedCom 20:06 - Error - ID 1008 - Customer Improvement Program (could not send data to Microsoft) 21:48 - Critical - ID 41 - Kernel-Power (System was restarted without proper shutdown) 21:48 - Error - ID 6008 - EventLog (Previous system down was not planned) 21:48 - Error - ID 1101 - EventLog (Audit Event ignored) 21:49 - Error - ID 10016 - DistributedCom Both DistributedCom events have a description along these lines (translated from French): The authorisation parameters specific to the application are not allowing Local Execeution for the COM server application with the CLSID {C97FCC79-E628-407D-AE68-A06AD6D8B4D1} and the APPID {344ED43D-D086-4961-86A6-1106F4ACAD9B} to the SID AUTHORITY NT\User System (S-1-5-18) from the address LocalHost (LRPC usage). This security authorisation can be changed with the Component service administration tool. UPDATE 2010/12/31 Here are the error messages I have on blue screens : STOP C000007xA - Kernel_Data_Inpage_Error "Unkown hard error" C00000135 - Can't start because &hs is missing

  Read the article

• What diagnostics are safe to run on an SSD drive?

  - by Peter Mounce

  I have a MacBook Pro (late 2010) with a Crucial RealSSD 256Gb in it; 60Gb is given to the Windows 7 x64 BootCamp partition. I have a USB-attached 500Gb drive for (most) data. In the last day or so, I've had a BSOD and several OS freezes (both Mac OSX 10.6.6 and Win7). The system in both cases will boot fine (at the moment!) and then run things fine, then some time later a program will stop responding, followed shortly thereafter by the system as a whole, forcing a reboot. This smacks to me of a storage problem. Given that I have an SSD and not a regular magnetic HDD, what are my next steps, in both OS'? I haven't seen anything pertinent in Windows' event-log. I'm not sure of the equivalent place to look in OSX; it's never given me issue to find out. What are my options for attempting to save my data from the SSD to another drive, given that after some small amount of time (eg half an hour), the OS stops responding? What are the recommended next steps?

  Read the article

• Can a OS be copied from one hard drive to another and still boot?

  - by AlexMorley-Finch

  Background My computer gets stuck on the make and model screen after the BIOS screen, aka the Toshiba screen. After some research I've realized that the problem is the hard drive. I'm using an old 250gb model that USED to be used for backup purposes, however I loaded windows 7 ultimate onto it This hard drive has trouble getting up to full RPM therefore cannot boot correctly until its warmed up. meaning that my pc needs to be restarted several times before it boots (once it took my 13 reboots to get my pc on!) From my research its either that, or lack of power supply, and I've tried multiple PSUs. Question I have my OS and all my files on this 250gb HDD... If I were to literally open the explorer, and copy EVERYTHING (including hidden files obviously) from this 250gb, to a spare 500gb I've got knocking about... Will it boot if I just copy everything? I cannot be bothered to load another OS onto my PC so if there is a way I can just copy the existing one over from one HDD to another and have it boot normally. This would be epic! I've heard about HDD cloning software. But before I purchase and/or download this software, I need to know if i can just copy the OS over through the windows explorer

  Read the article

• Upon USB insert, record unique identifer sting, format drive to FAT32 and copy a file. Bash or Pytho

  - by samsixty

  Hello, This is what I want to do, insert USB flash drive. mount it. record uniquie identifer string to a file. format the drive to FAT32. copy a text file to the drive. unmount it. remove the drive. 30 times The situation is this, I have bought 30 usb drives. I need to format each one to ensure they are clean, I need the unique string from each device. I need to put the same txt file on each one. I am not great at writing scripts but can read and follow bash and python. Any pointers would be appreciated.

  Read the article

• What would interfere with changing the default application for opening files on OS X?

  - by Michael Prescott

  I know how to change the default application for opening files. I select a file in Finder, right-click and select Get Info from the context menu. In the file's Info window, expand the Open with: panel. In that panel is a combo box that says, in my case, Adobe Flash CS4. I click the combo box and select Flash Player. It changes. Then I click the Change All... button. A dialog pops up and says: Are you sure you want to change all similar documents to open with the application “Adobe Flash CS4”? This change will apply to all documents with extension “.swf”. Cancel/Continue Well, clicking Continue does exactly what the message says. It sets the Finder to open all swf files with Adobe Flash CS4. What is going on? Why doesn't the message say, .... "Flash Player"

  Read the article

• How should a programmer go about getting started with Flash/Flex/ActionScript?

  - by Graphics Noob

  What is the shortest path between zero (ie no flash related development software on my computer or information about where to obtain it or get started) to running a "hello world" ActionScript? I'm hoping for an answer that gives step by step instructions about exactly what software is needed to get started, an example of some "hello world" code, and instructions for compiling and running the code. I've spent more time than I think should be necessary researching this question and not found much information. Hopefully this question will be found by programmers like me who want to get started with Flash/Flex/ActionScript (After my morning of researching I still don't even know what terminology to use so I'll just throw it all out there). ActionScript tutorials I've found are focused on programming concepts, ie logic, branching, OOP, etc, and some even have code examples to download, but not a single one I've found explains how to compile and run the code. They all seem to assume you have an IDE standing by but no knowledge of programming, exactly the opposite of the position I'm in. Here are the most related SO questions I've found: http://stackoverflow.com/questions/59083/what-is-adobe-flex-is-it-just-flash-ii http://stackoverflow.com/questions/554899/getting-started-with-flex-3-ui-actionscript-programming http://stackoverflow.com/questions/2123105/how-to-learn-flex

  Read the article

• Why compiling in Flash IDE I cannot access stage in a Sprite constructor before addChild while if I

  - by yuri

  I've created this simple class (omissing package directive and imports) public class Viewer extends Sprite { public function Viewer():void { trace(stage); } } then in Flash IDE I import in first frame this AS: import Viewer var viewer = new Viewer(); stage.addChild(viewer); trace(viewer.stage); and this works as I expected: the first trace called in constructor say stage is "null" because I haven't yet add viewer to a DisplayObjectContainer. The second one output the stage object. So I created a project using AXDT eclipse plugin, I've recreated and compiled only the first class (trashed the AS init script used in Flash IDE because is not needed) and on the first trace ... wow ... the stage is filled with the stage Object. I seems to me that the compiler used by AXDT (Flex4 SDK open source) add the class... before construct it (!?).. to a DisplayObjectContainer already attached to a Stage. I want to understand how can reproduce this behaviour using compiler in Flash IDE so I can directrly access Stage in construction.

  Read the article

• Assemble an image browser side with JavaScript or Flash?

  - by Kris Walker

  Would it be possible to assemble an image on the browser by 'concatenating' other downloaded images together? The use case is this. The page will display 36 different tiles (small images). The user should be able to arrange those tiles into a 6 x 6 grid and save the resulting grid to disk as an image. The best solution would be to do it all in the browser without Flash. The next best solution would be to allow the user to create the grid in the browser with simple JavaScript drag and drop functionality and then send the coordinates to the server for image processing. The last solution would be to do it all in the browser with Flash. Is it even possible for Flash to create an image and then allow the user to save it from the browser? I am familiar with the Pixastic JavaScript library ( http://www.pixastic.com/ ), but it relies on getting image data to and from a canvas element which is not very well supported. What if I send the tile images to the browser as base64 encoded strings? Could I use JavaScript to create the 6 x 6 grid image? And if so, is there some way of allowing the user to get it onto disk without relying on the canvas element?

  Read the article

• Flash player inside a div is moving the whole page wrapper down in IE (why?)

  - by janoChen

  I placed the flash player using: position: absolute; top: 20; right: 40; in the div around it. css: #page { position: relative; } #flashplayer { position: absolute; top: 10px; right: 30px; } (as you can see #page is relative) html: <div id="page"> <div id="flashplayer"> <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="300" height="35"> <param name="movie" value="music_player/player_mini.swf" /> <param name="quality" value="high" /> <embed src="music_player/player_mini.swf" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="300" height="35"></embed> </object> </div> <div id="formfloat"> the page: http://ada.kiexpro.com/test/

  Read the article

• Silverlight, Flash, or JavaScript for web app that runs client-side, or just stick with C#?

  - by Sootah

  Silverlight, Flash, and JavaScript, oh my.. I have a couple of applications that I need to develop for one of my business partners that will be distributed to dozens of people. These applications will need to be able to query information from the internet (query via Google, grab feeds from our other sites, just general web access) and save files to their computer. The reason I want to host the application is so that it all can be centrally managed, and any updates would be instantly deployed to everyone that uses the service. There always seems to be headaches with developing a pure desktop app in a language like C# with regards to making sure people use the latest version, don't have some odd problem with the installer, etc. Since we don't want to tie up our server's CPU I want effectively all of the processing done client-side. Meaning that they would log into their account, access the app, and then all the work done within the app is all handled by their machine. Only specific data would be sent back to the server. So - which language is best for this? Microsoft's Silverlight, Adobe's Flash, or Sun's JavaScript? I've heard a lot of good things about Silverlight and have wanted to try it for some time. I've only done extremely limited JavaScript programming, and absolutely none with Flash. Or, with my main requirement being that the client does all of its own processing should I just stick with C#? Also, is there any way to integrate a C# app into a webpage? I've never even considered it (or have any idea if it's even possible) until just now. Thanks in advance! -Sootah

  Read the article

• TrueCrypt drive letter not available

  - by Tono Nam

  With c# or a batch file I mount a trueCrypt volume located at A:\volumeTrueCrypt.tc With c# I do: static void Main(string[] args) { var p = Process.Start( fileName:@"C:\Program Files\TrueCrypt\TrueCrypt.exe", arguments:@"/v a:\volumetruecrypt.tc /lw /a /p truecrypt" ); p.WaitForExit(); } the alternative is to run the command on the command line as: C:\Windows\system32>"C:\Program Files\TrueCrypt\TrueCrypt.exe" /v "a:\volumetruecrypt.tc" /lw /a /p truecrypt Either way I get the error: Why do I get that error? I was able to run that command the first time. The moment I dismounted the volume and tryied to mount it again I got that error. I know that drive letter W is available because it shows as an available letter on true crypt if I where to open it manually: If I where then click on the button mount and then type the password truecrypt (truecrypt is the password) then it will successfully mount on drive w. Why I am not able to mount it from the command line!? If I change the drive letter on the command line it works. I want to use the drive W though. In other words executing "C:\Program Files\TrueCrypt\TrueCrypt.exe" /v "a:\volumetruecrypt.tc" /lz /a /p truecrypt will successfully mount that volume on drive z but I do not want to mount it on drive z I want to mount it on drive w. The first time I ran the batch it ran fine. Also if I restart my computer I believe it should work. More info on how to use trueCrypt through the command line can be found at: http://www.truecrypt.org/docs/?s=command-line-usage Edit I was also investivating when does this error occures. In order to generate this error you need to follow this steps. 1) execute the command: (note the /q argument at the end for quiet) "C:\Program Files\TrueCrypt\TrueCrypt.exe" /v "a:\volumetruecrypt.tc" /ln /a /p truecrypt /q "C...TrueCrypt.exe" = location where trueCrypt is located /v "path" = location where volume is located /n = drive letter n /p truecrypt = password is "trueCrypt" /q = execute in quiet mode. do not show window note I am mounting to drive letter n 2) now volume should be mounted. 3) Open trueCrypt and manually dismount that volume (without using command line) 4) Attempt to run the same command line (without the /q so you see the error) "C:\Program Files\TrueCrypt\TrueCrypt.exe" /v "a:\volumetruecrypt.tc" /ln /a /p truecrypt 5) an error should show up So the problem ocures when I manually dismount the volume. If I dismount it from the command line I get no errors. But I think this is a bug from trueCrypt

  Read the article

• User based BitLocker Drive Encryption

  - by Starx

  While Unlocking a Encrypted Drive.. It is possible for that drive to be unlocked for only the particular user and not all other users who use the system. For example, there are two users... User1 and User2, user1 unlocked a encrypted drive, now he locks the desktop and user2 comes and open the system from his account. Now, user2 also can access the drive which user1 unlocked. User2 must not be able to open the drive. If he has the password the the drive then he might have access but not before that.

  Read the article

• Spotlight Infinite Indexing issue (external data drive)

  - by Manca Weeks

  This is an external drive, formerly a boot drive which is now in use only to access music files (sibelius, audio, midi, live, logic etc.) without transferring the data into a new boot system, partly because of the issue I am about to describe, but mostly because the majority of the data is mainly there for archival purposes. The user is a composer and prominent musician and needs to be able to rehash the data at will. I have tried several things - here is a list: - make complete filesystem clone with antonio diaz's ddrescue - run Disk Warrior on copy, repair whatever errors occurred - wipe out all ACLs on entire drive - set all permissions to the same value - wide open 777 - remove any system data (applications, system files, including hidden files to the best of my knowledge) by selecting only non-system/app data and using Carbon Copy Cloner to put only the data of interest onto a newly formatted drive - transfer data to newly formatted drive folder by folder, resetting the spotlight index in between adding each to observe for issues (interesting here is that no issues occurred except for in Documents folder - when I transferred only the Documents folder to a newly formatted drive on its own - no trouble. It appears almost as thought it may not be the content but the quantity or specific combination of data that results in problems) - use DataRescue to transfer the data to yet another newly formatted drive to expose any missed hidden files Between each of the above steps I stopped Spotlight (search for anything beginning with md in Activity Monitor - All Processes and quitting it), deleted the .Spotlight-V100 directory from the affected drive. Restart Splotlight indexing by adding drive to Spotlight privacy list and removing it. In each case the same issue occurs - Spotlight begins indexing normally (or so it seems), then the index estimated time increases, usually to 4 hours remaining. This is where it gets stuck and continues to predict 4 hours remaining but never finishes. Sometimes I can't eject the drive and have to quit the md.. processes from Activity Monitor to be able to eject the drive without Force Eject. Once I disconnect the drive after the 4 hours remaining situation - if I reattach it, Spotlight forever estimates remaining time and never gets going again. So there it is. It is apparently not a filesystem issue, not a permissions issue and not tied to any particular piece of hardware or protocol (used USB and FW drives). I have tried this on several machines (3 to be precise) and in 10.5.8 and 10.6.5. Simply disabling Spotlight on this volume is not an option because the owner has no clue where things are as the data on the volume dates back to music projects and compositions from 2003 and before. He needs to be able to query for results. Anyone got any ideas? ---update 2-6-11 Since I have not received any responses except the one below which appears to misunderstand my point, I am updating this post hoping to get more responses. I have used the terminal command sudo opensnoop -p PID where PID is the mdworker process ID to try and determine what Spotlight is doing and hopefully find the files it's having trouble with. Here's what happens: After indexing for a few hours, mdworker is gone. It no longer shows up in Activity Monitor under "All Processes" and the Terminal window with the opensnoop result stops moving. I then proceeded to execute the same command on mds to see what it was doing and here's what I get, repeatedly: 501 57 mds 21 / 501 57 mds 21 /Volumes/Sno Leppard 501 57 mds 21 /Volumes/Tiger 501 57 mds 21 /Volumes/Leppard 501 57 mds 21 /Volumes/Disk Warrior 501 57 mds 21 /Volumes/ONM Data These represent all the volumes currently mounted in the system. All except ONM Data, which is the one I am trying to index, are excluded from SPotlight indexing at the moment. The sequence above repeats over and over, with slight variation, sometimes skipping one of the volumes. Questions - what happened to mdworker? What is mds doing? I will let this run until tomorrow morning and throughout the day and monitor for any changes. Any input would be very much appreciated. Even if you're not sure what the ultimate answer is, please alert me to anything you think I may be missing. Hopefully at some point we will figure this out... Thanks, M __final edit__ I finally resolved the issue and here is how I did it. I used the terminal command "sudo opensnoop -p PID" where the PID is the process id of the processes I was monitoring. I was looking at all instances of mds and mdworker running in the system. After the third time through indexing the same data set (see info above), I contacted Apple and got to their highest level of support - they were flabbergasted as well. They advised me to install yet another default 10.6.6 system and try again. The same pattern repeated - mds and mdworker(s) would start indexing and eventually the spotlight icon would say 6 hours remaining and all mdworkers were gone, mds at 90% or so of CPU. But I did finally figure out that the first time mdworker stopped like that, the last file it touched was always in the same folder. I excluded that folder from spotlight search and the rest of the data set indexed within about 2 hours with no strange behavior or failures. I copied that folder to another machine and Spotlight barfed immediately. Exclude that folder and all is well again. I have no clue what is causing this behavior, still, but I did find a functional solution to the problem. Anyone with a similar problem - run opensnoop on all instances of mds and mdworker and wait patiently for wdworker to exit. Look at the last file it touched and exclude the enclosing folder from being indexed. I was able to repeat the issue and solution on 2 different installs and 2 different copies of the data set. Hope this helps. If we find an actual cause of the folder being such a problem (it is called MICHAEL BRECKER RECORD SOLOS and contains almost 1 GB of audio related files - performer, live, SD2 - things like that), I will edit again to let you all know. Thanks for ay attempts to help, M

  Read the article

• “Play Now” via website vs. download & install

  - by Inside

  I've spent some time looking over the various threads here on GDSE and also on the regular Stackoverflow site, and while I saw a lot of posts and threads regarding various engines that could be used in game development, I haven't seen very much discussion regarding the various platforms that they can be used on. In particular, I'm talking about browser games vs. desktop games. I want to develop a simple 3D networked multiplayer game - roughly on the graphics level of Paper Mario and gameplay with roughly the same level of interaction as a hack & slash action/adventure game - and I'm having a hard time deciding what platform I want to target with it. I have some experience with using C++/Ogre3D and Python/Panda3D (and also some synchronized/networked programming), but I'm wondering if it's worth it to spend the extra time to learn another language and another engine/toolkit just so that the game can be played in a browser window (I'm looking at jMonkeyEngine right now). Is it worth it to go with engines that are less-mature, have less documentation, have fewer features, and smaller communities* just so that a (possibly?) larger audience can be reached? Does it make sense to even go with a web-environment for the kind of game that I want to make? Does anyone have any experiences with decisions like this? (* With the exception of Flash-based engines it seems like most of the other approaches have downsides when compared to what is available for desktop-based environments. I'd go with Flash, but I'm worried that Flash's 3D capabilities aren't mature enough right now to do what I want easily. There's also Unity3D, but I'm not sure how I feel about that at all. It seems highly polished, but requires a plugin to be downloaded for the game to be played -- at that rate I might as well have players download my game.) For simple & short games the Newgrounds approach (go to the site, click "play now", instant gratification) seems to work well. What about for more complex games? Is there a point where the complexity of a game is enough for people to say "OK, I'm going to download and play that"?

  Read the article

• Scan Your Thumb Drive for Viruses from the AutoPlay Dialog

  - by Mysticgeek

  It’s always a good idea to scan someone’s flash drive for viruses when you use it on your PC. Today we look at how to use Microsoft Security Essentials to scan thumb drives via the AutoPlay dialog. Editor Note: This technique was created by our friend Ramesh Srinivasan from the winhelponline tech blog. If you haven’t done so already, download and install Microsoft Security Essentials (link below), which has earned the How-To Geek official endorsement. Next download the mseautoplay.zip (link below). Unzip the file to view its contents. Then move the msescan.vbs script file into the Windows directory. Next double-click on the mseautoplay.reg file… Click Yes to the warning dialog window asking if you’re sure you want to add to the registry. After it’s added you’ll get a confirmation message…click OK. Now when you pop in a thumb drive, when AutoPlay comes up you will have the options to scan it with MSE first. MSE starts the scan of the thumb drive…   You can use this to scan any removable media. Here is an example of the ability to scan a DVD with MSE before opening any files. You can also go into Control Panel and set it as a default option of AutoPlay. Open Control Panel, View by Large icons, and click on AutoPlay. Notice that now when you go to change the default options for different types of media, Scanning with MSE is now included in the dropdown lists. Remove Settings If you want to remove the MSE AutoPlay Handler, Ramesh was kind enough to create an undo registry file. Double-click on undo.reg from the original MSE AutoPlay folder and click yes to the message to remove the setting.   Then you will need to go into the Windows directory and manually delete the msescan.vbs script file. This is an awesome trick which will allow you to scan your thumb drives and other removable media from the AutoPlay dialog. We tested it out on XP, Vista, and Windows 7 and it works perfectly on each one. Download mseautoplay.zip Download Microsoft Security Essentials Read Our Review of MSE Similar Articles Productive Geek Tips Disable AutoPlay in Windows VistaFind Your Missing USB Drive on Windows XPDisable Autoplay of Audio CDs and USB DrivesHow To Remove Antivirus Live and Other Rogue/Fake Antivirus MalwareScan Files for Viruses Before You Download With Dr.Web TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox)

  Read the article

• Game development: “Play Now” via website vs. download & install

  - by Inside

  Heyo, I've spent some time looking over the various threads here on gamedev and also on the regular stackoverflow and while I saw a lot of posts and threads regarding various engines that could be used in game development, I haven't seen very much discussion regarding the various platforms that they can be used on. In particular, I'm talking about browser games vs. desktop games. I want to develop a simple 3D networked multiplayer game - roughly on the graphics level of Paper Mario and gameplay with roughly the same level of interaction as a hack & slash action/adventure game - and I'm having a hard time deciding what platform I want to target with it. I have some experience with using C++/Ogre3D and Python/Panda3D (and also some synchronized/networked programming), but I'm wondering if it's worth it to spend the extra time to learn another language and another engine/toolkit just so that the game can be played in a browser window (I'm looking at jMonkeyEngine right now). For simple & short games the newgrounds approach (go to the site, click "play now", instant gratification) seems to work well. What about for more complex games? Is there a point where the complexity of a game is enough for people to say "ok, I'm going to download and play that"? Is it worth it to go with engines that are less-mature, have less documentation, have fewer features, and smaller communities* just so that a (possibly?) larger audience can be reached? Does it make sense to even go with a web-environment for the kind of game that I want to make? Does anyone have any experiences with decisions like this? Thanks! (* With the exception of flash-based engines it seems like most of the other approaches have these downsides when compared to what is available for desktop-based environments. I'd go with flash, but I'm worried that flash's 3D capabilities aren't mature enough right now to do what I want easily. There's also Unity3D, but I'm not sure how I feel about that at all. It seems highly polished, but requires a plugin to be downloaded for the game to be played -- at that rate I might as well have players download my game.)

  Read the article

• Access Denied on a Drive where All Users list have been deleted in Security Tab

  - by darkstar13

  Hi All, (System is Windows 7 x64) I wanted to restrict access of other people in a certain drive of my computer (Harddisk 1 is partitioned to C & D; I want to restrict Drive D). What I did was go to the Security Tab (under Drive Properties) and remove the All Users entry. My account is an administrator account. I left only Systems and Administrator on the list. However, when I tried to access drive D, I got an Access Denied error, and Security Tab is already missing. I tried to edit Local Group Policy; it does not work. Take Ownership is not available for the Drive as well, but I see it enabled if I select files / folders. Please help. Thanks. Also, I am wondering why, as an Administrator, have my access to that drive denied.

  Read the article

• Applications don't see mapped network drive after waking from sleep

  - by Chris

  I have a network share mapped as a drive letter on a Windows 7 PC that's part of a simple home network. When I wake the PC from sleep, Explorer sometimes says the drive is disconnected. Doubleclicking the drive connects it instantly, as far as Explorer is concerned. But some other applications don't see the drive unless I take additional steps (e.g., navigate to the drive in an "Open..." dialog). Is there any way to get the drive to be connected for all purposes immediately when resuming from standby? I've found the "Always wait for the network at computer startup and logon" item in Group Policy, but I'm not sure what the setting does or whether it would fix this problem. I have network discovery enabled and un-firewalled.

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >