Search Results

Search found 7128 results on 286 pages for 'httpcontext cache'.

Page 90/286 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• flashcache with mdadm and LVM

  - by Backtogeek

  I am having trouble setting up flashcache on a system with LVM and mdadm, I suspect I am either just missing an obvious step or getting some mapping wrong and hoped someone could point me in the right direction? system info: CentOS 6.4 64 bit mdadm config md0 : active raid1 sdd3[2] sde3[3] sdf3[4] sdg3[5] sdh3[1] sda3[0] 204736 blocks super 1.0 [6/6] [UUUUUU] md2 : active raid6 sdd5[2] sde5[3] sdf5[4] sdg5[5] sdh5[1] sda5[0] 3794905088 blocks super 1.1 level 6, 512k chunk, algorithm 2 [6/6] [UUUUUU] md3 : active raid0 sdc1[1] sdb1[0] 250065920 blocks super 1.1 512k chunks md1 : active raid10 sdh1[1] sda1[0] sdd1[2] sdf1[4] sdg1[5] sde1[3] 76749312 blocks super 1.1 512K chunks 2 near-copies [6/6] [UUUUUU] pcsvan PV /dev/mapper/ssdcache VG Xenvol lvm2 [3.53 TiB / 3.53 TiB free] Total: 1 [3.53 TiB] / in use: 1 [3.53 TiB] / in no VG: 0 [0 ] flashcache create command used: flashcache_create -p back ssdcache /dev/md3 /dev/md2 pvdisplay --- Physical volume --- PV Name /dev/mapper/ssdcache VG Name Xenvol PV Size 3.53 TiB / not usable 106.00 MiB Allocatable yes PE Size 128.00 MiB Total PE 28952 Free PE 28912 Allocated PE 40 PV UUID w0ENVR-EjvO-gAZ8-TQA1-5wYu-ISOk-pJv7LV vgdisplay --- Volume group --- VG Name Xenvol System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 2 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 1 Max PV 0 Cur PV 1 Act PV 1 VG Size 3.53 TiB PE Size 128.00 MiB Total PE 28952 Alloc PE / Size 40 / 5.00 GiB Free PE / Size 28912 / 3.53 TiB VG UUID 7vfKWh-ENPb-P8dV-jVlb-kP0o-1dDd-N8zzYj So that is where I am at, I thought that was the job done however when creating a logical volume called test and mounting it is /mnt/test the sequential write is pathetic, 60 ish MB/s /dev/md3 has 2 x SSD's in Raid0 which alone is performing at around 800 MB/s sequential write and I am trying to cache /dev/md2 which is 6 x 1TB drives in raid6 I have read a number of pages through the day and some of them here, it is obvious from the results that the cache is not functioning but I am unsure why. I have added the filter line in the lvm.conf filter = [ "r|/dev/sdb|", "r|/dev/sdc|", "r|/dev/md3|" ] It is probably something silly but the cache is clearly performing no writes so I suspect I am not mapping it or have not mounted the cache correctly. dmsetup status ssdcache: 0 7589810176 flashcache stats: reads(142), writes(0) read hits(133), read hit percent(93) write hits(0) write hit percent(0) dirty write hits(0) dirty write hit percent(0) replacement(0), write replacement(0) write invalidates(0), read invalidates(0) pending enqueues(0), pending inval(0) metadata dirties(0), metadata cleans(0) metadata batch(0) metadata ssd writes(0) cleanings(0) fallow cleanings(0) no room(0) front merge(0) back merge(0) force_clean_block(0) disk reads(9), disk writes(0) ssd reads(133) ssd writes(9) uncached reads(0), uncached writes(0), uncached IO requeue(0) disk read errors(0), disk write errors(0) ssd read errors(0) ssd write errors(0) uncached sequential reads(0), uncached sequential writes(0) pid_adds(0), pid_dels(0), pid_drops(0) pid_expiry(0) lru hot blocks(31136000), lru warm blocks(31136000) lru promotions(0), lru demotions(0) Xenvol-test: 0 10485760 linear I have included as much info as I can think of, look forward to any replies.

  Read the article

• Unable to locate Windows Server Error log files

  - by Sam007

  I am getting an error in my application on 500 Internal Server Error. The firebug gives me, NetworkError: 500 Internal Server Error - http://webgis.arizona.edu/ArcGIS/rest/services/webGIS/Shock_Models/GPServer/Income_Log/jobs/jc09c501156564f71abc5d98393581267/results/final_shp?dpi=96&transparent=true&format=png8&imageSR=102100&f=image&bbox=%7B%22xmin%22%3A-14519891.438356264%2C%22ymin%22%3A637618.0139790997%2C%22xmax%22%3A-6692739.741956295%2C%22ymax%22%3A6507981.786279075%2C%22spatialReference%22%3A%7B%22wkid%22%3A102100%7D%7D&bboxSR=102100&size=800%2C600 And when I goto that particular link, I get this error, Server Error - Object reference not set to an instance of an object. Any idea how I can correct it? UPDATE I was told to use fiddler and see the error details that is occurring over the network and this is the output that I got, SESSION STATE: Done. Response Entity Size: 849 bytes. == FLAGS ================== BitFlags: [ClientPipeReused, ServerPipeReused] 0x18 X-CLIENTPORT: 2010 X-RESPONSEBODYTRANSFERLENGTH: 849 X-EGRESSPORT: 2023 X-HOSTIP: 128.196.53.161 X-PROCESSINFO: firefox:2248 X-CLIENTIP: 127.0.0.1 X-SERVERSOCKET: REUSE ServerPipe#2 == TIMING INFO ============ ClientConnected: 15:53:51.383 ClientBeginRequest: 15:53:51.494 GotRequestHeaders: 15:53:51.494 ClientDoneRequest: 15:53:51.494 Determine Gateway: 0ms DNS Lookup: 0ms TCP/IP Connect: 0ms HTTPS Handshake: 0ms ServerConnected: 15:52:45.077 FiddlerBeginRequest: 15:53:51.495 ServerGotRequest: 15:53:51.495 ServerBeginResponse: 15:53:51.679 GotResponseHeaders: 15:53:51.679 ServerDoneResponse: 15:53:51.679 ClientBeginResponse: 15:53:51.679 ClientDoneResponse: 15:53:51.679 Overall Elapsed: 00:00:00.1850106 The response was buffered before delivery to the client. == WININET CACHE INFO ============ This URL is not present in the WinINET cache. [Code: 2] * Note: Data above shows WinINET's current cache state, not the state at the time of the request. * Note: Data above shows WinINET's Medium Integrity (non-Protected Mode) cache only. But I am still confused as to what the error is? This is the application. I am not sure if the error is due to the ArcGIS-Server or the Windows Server 2008. I am new on working with the Windows Server and wanted to know where can I look for the error lof files? This is the link which gives the details and the log info of the job executed. This is the output.

  Read the article

• Nginx + Passenger running a RoR app is returning 401 when 302 is expected

  - by DBruns

  I've got a RoR app running on Passenger on top of Nginx. I'm using devise for my authentication method and have a link that gets sent in an email to users that requires authentication to view. If a user clicks the link from Outlook, and IE is the default browser, IE makes an HTTP request using the following headers: GET http://www.company.com/custom_layouts/108 HTTP/1.1 Accept: */* Accept-Language: en-us User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; .NET4.0C; .NET4.0E) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: www.company.com Returning: HTTP/1.1 401 Unauthorized Content-Type: /; charset=utf-8 Transfer-Encoding: chunked Connection: keep-alive Status: 401 X-Powered-By: Phusion Passenger (mod_rails/mod_rack) 2.2.15 WWW-Authenticate: Basic realm="Application" Cache-Control: no-cache X-UA-Compatible: IE=Edge,chrome=1 Set-Cookie: _vxwer_session=[sessionstr]; path=/; HttpOnly X-Runtime: 0.011918 Server: nginx/0.7.67 + Phusion Passenger 2.2.15 (mod_rails/mod_rack) 31 You need to sign in or sign up before continuing. 0 When the exact same URL is typed into the address bar, it does this: GET http://www.company.com/custom_layouts/108 HTTP/1.1 Accept: image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */* Accept-Language: en-US User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; .NET4.0C; .NET4.0E) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: www.company.com Returning: HTTP/1.1 302 Found Content-Type: text/html; charset=utf-8 Transfer-Encoding: chunked Connection: keep-alive Status: 302 X-Powered-By: Phusion Passenger (mod_rails/mod_rack) 2.2.15 Location: http://www.company.com/users/sign_in Cache-Control: no-cache X-UA-Compatible: IE=Edge,chrome=1 Set-Cookie: _xswer_session=[session_info_here]; path=/; HttpOnly X-Runtime: 0.010798 Server: nginx/0.7.67 + Phusion Passenger 2.2.15 (mod_rails/mod_rack) 6f <html><body>You are being <a href="http://www.company.com/users/sign_in">redirected</a>.</body></html> 0 I expect them to return the same thing regardless.

  Read the article

• Which Processor should I buy: Intel Quad Core 2.5Ghz or Intel Core 2 Duo 2.9 Ghz?

  - by Kryten

  Hi, I am looking at buying a desktop and have narrowed down my choices to 2 machines with exactly the same specs, but different CPU's. Machine 1 CPU: Intel® Core™2 Quad Processor Q8300 (4M Cache, 2.50 GHz, 1333 MHz FSB) Machine 2 CPU: Intel® Core™2 Duo Processor E7500 (3M Cache, 2.93 GHz, 1066 MHz FSB) I plan on using the PC for the following: Music Playing Software Development Virtual Machine Running Gaming "General Work" Which CPU would better suit the job?

  Read the article

• nginx rewrite for /blah/(.*) /$1

  - by skrewler

  I'm migrating from mod_php to nginx. I got everything working except for this rewrite.. I'm just not familiar enough with nginx configuration to know the correct way to do this. I came up with this by looking at a sample on the nginx site. server { server_name test01.www.myhost.com; root /home/vhosts/my_home/blah; access_log /var/log/nginx/blah.access.log; error_log /var/log/nginx/blah.error.log; index index.php; location / { try_files $uri $uri/ @rewrites; } location @rewrites { rewrite ^ /index.php last; rewrite ^/ht/userGreeting.php /js/iFrame/index.php last; rewrite ^/ht/(.*)$ /$1 last; rewrite ^/userGreeting.php$ /js/iFrame/index.php last; rewrite ^/a$ /adminLogin.php last; rewrite ^/boom\/(.*)$ /boom/index.php?q=$1 last; rewrite ^favicon.ico$ favico_ry.ico last; } # This block will catch static file requests, such as images, css, js # The ?: prefix is a 'non-capturing' mark, meaning we do not require # the pattern to be captured into $1 which should help improve performance location ~* \.(?:ico|css|js|gif|jpe?g|png)$ { # Some basic cache-control for static files to be sent to the browser expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; } include php.conf; } The issue I'm having is with this rewrite: rewrite ^ht\/(.*)$ /$1 last; 99% of requests that will hit this rewrite are static files. So I think maybe it's getting sent to the static files section and that's where things are being messed up? I tried adding this but it didn't work: location ~* ^ht\/.*\.(?:ico|css|js|gif|jpe?g|png)$ { # Some basic cache-control for static files to be sent to the browser expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; } Any help would be appreciated. I know the best thing to do would be to just change the references of /ht/whatever.jpg to /whatever.jpg in the code.. but that's not an option for now.

  Read the article

• Network throughput issue (ARP-related)

  - by Joel Coel

  The small college where I work is having some very strange network issues. I'm looking for any advice or ideas here. We were fine over the summer, but the trouble began few days after students returned to campus in force for the fall term. Symptoms The main symptom is that internet access will work, but it's very slow... often to the point of timeouts. As an example, a typical result from Speedtest.net will return .4Mbps download, but allow 3 to 8 Mbps upload speed. Lesser symptoms may include severely limited performance transferring data to and from our file server, or even in some cases the inability to log in to the computer (cannot reach the domain controller). The issue crosses multiple vlans, and has effected devices on nearly every vlan we operate. The issue does not impact all machines on the network. An unaffected machine will typically see at least 11Mbps download from speedtest.net, and perhaps much more depending on larger campus traffic patterns at the time. There is one variation on the larger issue. We have one vlan where users were unable to log into nearly all of the machines at all. IT staff would log in using a local administrator account (or in some cases cached credentials), and from there a release/renew or pinging the gateway would allow the machine to work... for a while. Complicating this issue is that this vlan covers our computer labs, which use software called Deep Freeze to completely reset the hard drives after a reboot. It could just the same issue manifesting differently because of stale data on machines that have not permanently altered low-level info for weeks. We were able to solve this, however, by creating a new vlan and moving the labs over to the new vlan wholesale. Instigations Eventually we noticed that the effected machines all had recent dhcp leases. We can predict when a machine will become "slow" by watching when a dhcp lease comes up for renewal. We played with setting the lease time very short for a test vlan, but all that did was remove our ability to predict when the machine would become slow. Machines with static IPs have pretty much always worked normally. Manually releasing/renewing an address will never cause a machine to become slow. In fact, in some cases this process has fixed a machine in that state. Most of the time, though, it doesn't help. We also noticed that mobile machines like laptops are likely to become slow when they cross to new vlans. Wireless on campus is divided up into "zones", where each zone maps to a small set of buildings. Moving to a new building can place you in a zone, thereby causing you to get a new address. A machine resuming from sleep mode is also very likely to be slow. Mitigations Sometimes, but not always, clearing the arp cache on an effected machine will allow it to work normally again. As already mentioned, releasing/renewing a local machine's IP address can fix that machine, but it's not guaranteed. Pinging the default gateway can also sometimes help with a slow machine. What seems to help most to mitigate the issue is clearing the arp cache on our core layer-3 switch. This switch is used for our dhcp system as the default gateway on all vlans, and it handles inter-vlan routing. The model is a 3Com 4900SX. To try to mitigate the issue, we have the cache timeout set on the switch all the way down to the lowest possible time, but it hasn't helped. I also put together a script that runs every few minutes to automatically connect to the switch and reset the cache. Unfortunately, this does not always work, and can even cause some machines to end up in the slow state for a short time (though these seem to correct themselves after a few minutes). We currently have a scheduled job that runs every 10 minutes to force the core switch to clear it's ARP cache, but this is far from perfect or desirable. Reproduction We now have a test machine that we can force into the slow state at will. It is connected to a switch with ports set up for each of our vlans. We make the machine slow by connecting to different vlans, and after a new connection or two it will be slow. It's also worth noting in this section that this has happened before at the start of prior terms, but in the past the problem has gone away on it's own after a few days. It solved itself before we had a chance to do much diagnostic work... hence why we've allowed it to drag so long into the term this time 'round; the expectation was this would be a short-lived situation. Other Factors It's worth mentioning that we have had about half a dozen switches just outright fail over the last year. These are mainly 2003/2004-era 3Coms (mostly 4200's) that were all put in at about the same time. They should still be covered under warranty, buy HP has made getting service somewhat difficult. Mostly in power supplies that have failed, but in a couple cases we have used a power supply from a switch with a failed mainboard to bring a switch with a failed power supply back to life. We do have UPS devices on all but three of four switches now, but that was not the case when I started two and a half years ago. Severe budget constraints (we were on the Dept. of Ed's financially challenged institutions list a couple years back) have forced me to look to the likes of Netgear and TrendNet for replacements, but so far these low-end models seem to be holding their own. It's also worth mentioning that the big change on our network this summer was migrating from a single cross-campus wireless SSID to the zoned approach mentioned earlier. I don't think this is the source of the issue, as like I've said: we've seen this before. However, it's possible this is exacerbating the issue, and may be much of the reason it's been so hard to isolate. Diagnosis At first it seemed clear to us, given the timing and persistent nature of the problem, that the source of the issue was an infected (or malicious) student machine doing ARP cache poisoning. However, repeated attempts to isolate the source have failed. Those attempts include numerous wireshark packet traces, and even taking entire buildings offline for brief periods. We have not been able even to find a smoking gun bad ARP entry. My current best guess is an overloaded or failing core switch, but I'm not sure on how to test for this, and the cost of replacing it blindly is steep. Again, any ideas appreciated.

  Read the article

• What are the differences between the "generic" and "server" kernel images provided by Ubuntu?

  - by dcrosta

  In particular, I'm wondering if there are any patches or config adjustments made to the disk cache size in the server edition. I'm running on a small system (256M RAM), and would like to experiment with keeping the disk cache size smaller so that there's more memory available for applications. I've found this page at Ubuntu's website, which neither answers my questions nor is about the 9.04 release.

  Read the article

• Nginx: bug using if in location, how do I rectify

  - by Quintin Par

  I am using nginx in reverse proxy mode. In my server section I have this code to set expire and cache control of my static files. location ~* ^.+\.(css|js|png|gif)$ { access_log off; expires max; add_header Cache-Control public; if (!-f $request_filename) { proxy_pass http://localhost:82; } } This is quite obviously creating issues. Can someone help me correct this code to use try_files or rewrite?

  Read the article

• Using ssd intensively. Should we worry?

  - by vvavepacket

  I'm currently using conventional HDDs like the 5200 rpms, browsing a lot, my folder and files are scattered, torrenting always and I'm not fond of optimization like disabling cache, cleaning temp Files , etc. My question is, given the above conditions (no disable of cache, seeding always in torrent, downloading torrent) is it safe to use SSD? I'm pretty worried about cycles but I read an article wherein it says its safe since it will usually wear out for 10 years given that you always write heavily and continuously. Thanks

  Read the article

• How can I automatically restore all open PDF files after rebooting in Windows?

  - by Coldblackice

  I've tried using "Cache My Work" (http://cachemywork.codeplex.com/), but unfortunately, it only restores one instance of a program that was open upon rebooting. So when I have five separate Adobe Acrobat Pro windows open (each with its own PDF document), when I reboot, Cache My Work will only reopen one of them (not sure how CMW chooses which PDF to reopen, either). Besides switching to another PDF program (like one with tabs), is there a program that can do this?

  Read the article

• matlab on laptop [closed]

  - by bill

  I would to get any opnion regarding which of the two laptop configuration is best for running Matlab with (by running matlab I do not mean graphic simulation): HP EliteBook 8570p - Intel® Core™ i5-3210M (2.50 GHz, 3 MB L3 cache, 2 cores) Chipset Mobile Intel® QM77 Express 4 GB 1600 MHz DDR3 SDRAM OR HP g6-2090ej - 2.1 GHz Intel Core i7-3612QM 6 MB L3 cache 8 GB DDR3 The second one is i7 but the first one is the Elitbook series which is a "workstation". Which will be the best for Matlab computation (no graphic simulation only computing matrix etc.)?

  Read the article

• Output of free -m on a Linux server

  - by cat pants

  I can see from this page here: http://www.linuxatemyram.com/ That the correct amount of free ram is on the "-/+ buffers/cache" line. The extra ram being used is for disk caching. However, I noticed that the total amount of memory used listed in "-/+ buffers/cache" line is significantly less than the sum total of the "RES" column of the processes shown in top. And AFAIK, the "RES" column is how much physical memory is being used by a process. How do you explain this discrepancy?

  Read the article

• Using AppFabric session state provider, does each session get its own region?

  - by goombaloon

  I've been playing around with AppFabric Beta 2's session state provider. It appears that each new session get its own region (named "Default_Region_XXXX" (where XXXX is an apparent random sequence of numbers). If I understand regions correctly, it appears that each region is tied to a single cluster host, leaving a single point of failure. Why is each session being given it own region? Also, do sessions eventually timeout and clean themselves up in the cache or is that behavior just inherited from the cache settings? I'm wondering (if in a production application scenario), if one would use a separate named cache for session state apart from other application caches? Thanks.

  Read the article

• Propel-load-data is causing an error

  - by Jon Winstanley

  I am trying to load fixtures but myproject is erroring at the CLI and starting the indexer process. I have tried: Rebuilding the schema and model Emptying the database and starting again Clearing the cache Validating the YML file and trying much simpler data-dumps My platform is Symfony 1.0 on Windows Some also seems to have had the same issue in the past. C:\web\my_project>symfony propel-load-data backend >> propel load data from "C:\web\my_project\data\fixtures" PHP Warning: session_start(): Cannot send session cookie - headers already sent by (output started at C:\php\PEAR\symfony\vendor\pake\pakeFunction.php:366) in C:\php\PEAR\symfony\storage\sfSessionStorage.class.php on line 77 Warning: session_start(): Cannot send session cookie - headers already sent by (output started at C:\php\PEAR\symfony\vendor\pake\pakeFunction.php:366) in C:\php\PEAR\symfony\storage\sfSessionStorage.class.php on line 77 PHP Warning: session_start(): Cannot send session cache limiter - headers already sent (output started at C:\php\PEAR\symfony\vendor\pake\pakeFunction.php:366) in C:\php\PEAR\symfony\storage\sfSessionStorage.class.php on line 77 Warning: session_start(): Cannot send session cache limiter - headers already sent (output started at C:\php\PEAR\symfony\vendor\pake\pakeFunction.php:366) in C:\php\PEAR\symfony\storage\sfSessionStorage.class.php on line 77

  Read the article

• Cannot open xls file in IE

  - by Vladimir Bezugliy

  We have JSF web application that generates XLS file and gives user link to thes file. All works fine if access this file via HTTP. But IE(8) cannot open/save this xls file via HTTPS. There is following error message: Internet Explorer cannot download ...466088C5C313F92808BDB0AFF3447 from testhost. Internet Explorer was not able to open this Internet site. The requested site is either unavailable or cannot be found. Please try again later. I can open the same document via HTTPS in Firefox and in Chrome. What can be the problem with IE? Headers: HTTP/1.1 200 OK Date: Fri, 18 Jun 2010 14:45:42 GMT Server: Apache-Coyote/1.1 X-Powered-By: Servlet 2.5; JBoss-5.0/JBossWeb-2.1 X-UA-Compatible: IE=EmulateIE7 Last-Modified: Fri, 18 Jun 2010 14:45:11 GMT Cache-control: max-age=0, no-store, no-cache Pragma: no-cache Expires: 0 Content-Type: application/vnd.ms-excel Content-Length: 6656 Keep-Alive: timeout=5, max=100 Connection: Keep-Alive

  Read the article

• PerWebRequest LifetimeManager and Beyond (Asp.net Mvc)

  - by Soe Moe

  Hi, Currently, I created my custom PerWebRequestLifetimeManager using HttpContext.Current.Items as backing store. I used that lifetime manager for Linq2Sql DataContext. Eveything is working fine until I need to use Cache for storing data (for 5 min). After 5 min, I need to retrieve data from DB and put it into the Cache. To do so, I need to use Linq2Sql DataContext for retrieving data. But during that time, HttpContext.Current is null because which was happened when cache is expired; not in Web Request. So, what kind of LifetimeManager should I use for this scenario? Thanks in advance.

  Read the article

• HTTP Header - ntCoent-Length

  - by DMcKenna

  I get the following HTTP response headers in a particular response. All looks okay. However I have noticed that the content-length appears twice... Content-Length: 2424 ntCoent-Length: 2424 Is there a particular reason why the content-length is returned a second time as ntCoent-Length? HTTP/1.0 200 OK Date: Wed, 26 May 2010 09:38:19 GMT Server: Apache P3P: CP="NOI DSP COR CURa ADMa TA1a OUR BUS IND UNI COM NAV INT" Accept-Charset: iso-8859-1, unicode-1-1;q=0.8 Expires: Sun, 15 Jul 1990 00:00:00 GMT Pragma: no-cache Cache-Control: no-cache Content-Language: en ntCoent-Length: 2424 Connection: close Content-Type: text/html;charset=iso-8859-1 Content-Length: 2424

  Read the article

• Memcached broken pipe in rails

  - by abronte

  I seem to run into some random broken pipe errors if I try to access memcached a specific way. When I try to access memcached via Rails.cache, the first one or two reads/writes will result in a "MemCacheError (Broken pipe): Broken pipe" and return nil. But if I access memcached through a new object (ActiveSupport::Cache::MemCacheStore.new) I don't get the broken pipe error at all. I've tried upgrading to memcached 1.4.4 (was previously using 1.2.2) and I still got the error. I'm using rails 2.3.5. I would prefer to access memcached through Rails.cache because I takes namespaces into account. Any ideas?

  Read the article

• Noftification between J2EE components.

  - by Pratik

  Hi There! I have a design problem . My application has multiple J2EE components ,In simple terms one acts as a service provider(Non UI) and others are consumers(UI webapp) . The consumer gets the configuration data from the service provider(this basically reads the data from DB) during the start up and stores it in the Cache. The cache gets refreshed after periodic time to reflect any changes done at the database. The Problem Apart from the cache refresh ,I also want to notify the consumers when someone changes the DB . that configuration has been changed please reload it. What notification mechanism's can I use to achieve this. Thanks! Pratik

  Read the article

• Notification between J2EE components.

  - by Pratik

  Hi There! I have a design problem . My application has multiple J2EE components ,In simple terms one acts as a service provider(Non UI) and others are consumers(UI webapp) . The consumer gets the configuration data from the service provider(this basically reads the data from DB) during the start up and stores it in the Cache. The cache gets refreshed after periodic time to reflect any changes done at the database. The Problem Apart from the cache refresh ,I also want to notify the consumers when someone changes the DB . that configuration has been changed please reload it. What notification mechanism's can I use to achieve this. Thanks! Pratik

  Read the article

• Using chunked encoding in a POST request to an asmx web service on IIS 6 generates a 404

  - by user175869

  Hi, I'm using a CXF client to communicate with a .net web service running on IIS 6. This request (anonymised): POST /EngineWebService_v1/EngineWebService_v1.asmx HTTP/1.1 Content-Type: text/xml; charset=UTF-8 SOAPAction: "http://.../Report" Accept: */* User-Agent: Apache CXF 2.2.5 Cache-Control: no-cache Pragma: no-cache Host: uat9.gtios.net Connection: keep-alive Transfer-Encoding: chunked followed by 7 chunks of 4089 bytes and one of 369 bytes, generates the following output after the first chunk has been sent: HTTP/1.1 404 Not Found Content-Length: 103 Date: Wed, 10 Feb 2010 13:00:08 GMT Connection: Keep-Alive Content-Type: text/html Anyone know how to get IIS to accept chunked input for a POST? Thanks

  Read the article

• Flex RSL Understanding

  - by dta

  Till now I was using "Merged into code" for "Framework Linkage" in Flex Builder. Now, I changed it to "Runtime shared library". On doing a release build I got myapp.swf which is roughly 260 KB which was earlier close to 350 KB. It also generated framework.swz and framework.swf. But I copied only myapp.swf on my web site and not framework.swz. Still the website works just fine. I also cleared the flash player cache from here. It works just fine without the .swz file. So my questions are: Is the framework.swz file actually used or does the flash player have a copy of it beforehand. And is that copy not cleared by clearing cache of flash player? And, even after clearing the cache, I didn't see a request for framework.swz in firebug. Why?

  Read the article

• Sync Framework,LINQ, and my DAL

  - by Refracted Paladin

  I am creating a WPF app that needs to allow users to work in a temporary disconnected state and I plan to use a Local Database Cache. My question's are about my data access layer. Do you typically create the whole DAL to point at the Cache or both and create a switching mechanism? Is Entity's a good way to go for my DAL against the Cache? I am used to L2S but my understanding is that I can't use that against SQLCE, correct? Thanks! PS: Any good resources out there for using Sync, Linq, and WPF ALL TOGETHER? Tutorials, videos, etc?

  Read the article

• Change Cursor for Netbeans on Linux

  - by Daziplqa

  Hi, I am recently have been successfully installed NetBean 6.8 on Ubuntu Box (10.04). But the problem is, NetBeans doesn't use the Gnome mouse Cursor by default. instead, It uses some freak mouse cursor that I hate! So, do you have any idea about how to change the cursor that appears inside netbeans.(I have looked inside tools options but without any output) Also I have did: $ grep -iR cursor * Binary file var/cache/all-resources.dat matches Binary file var/cache/all-layers.dat matches Binary file var/cache/index/s2/javascript/8/1/_0.cfs matches (note, I didn't talked here about how to change the cursor inside some Java program written in NetBeans) Thanks in advance.

  Read the article

• Rails Action and Fragment Caching during Development?

  - by viatropos

  I'm just starting to get into Rails caching and am wondering how to test whether or not caching is working in my development environment. I have set these two config variables for both the development (temporarily) and production environments: config.action_controller.perform_caching = true config.action_controller.page_cache_directory = File.join(RAILS_ROOT, 'public', 'cache') And my controller basically looks like this (using the resource_controller gem): class EventsController < Spree::BaseController resource_controller caches_page :index index.response do |format| format.html format.xml { render :xml => @collection.to_xml } end # ... end If I do that, I get these files: public/cache/events.html public/cache/events.xml But when I change caches_page to caches_action, I don't see any generated files and am not sure how to tell if the response has been cached. What do I need to know to know that this is working? I've read the docs and related, the rails caching guides, the railscast, and a few other docs, but I'm still wondering where everything is stored. Thanks!

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >