Search Results

Search found 13366 results on 535 pages for 'non ascii'.

Page 90/535 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• What is the fastest way to Initialize a multi-dimensional array to non-default values in .NET?

  - by AMissico

  How do I initialize a multi-dimensional array of a primitive type as fast as possible? I am stuck with using multi-dimensional arrays. My problem is performance. The following routine initializes a 100x100 array in approx. 500 ticks. Removing the int.MaxValue initialization results in approx. 180 ticks just for the looping. Approximately 100 ticks to create the array without looping and without initializing to int.MaxValue. Routines similiar to this are called a few hundred-thousand to several million times during a "run". The array size will not change during a run and arrays are created one-at-a-time, used, then discarded, and a new array created. A "run" which may last from one minute (using 10x10 arrays) to forty-five minutes (100x100). The application creates arrays of int, bool, and struct. There can be multiple "runs" executing at same time, but are not because performance degrades terribly. I am using 100x100 as a base-line. I am open to suggestions on how to optimize this non-default initialization of an array. One idea I had is to use a smaller primitive type when available. For instance, using byte instead of int, saves 100 ticks. I would be happy with this, but I am hoping that I don't have to change the primitive data type. public int[,] CreateArray(Size size) { int[,] array = new int[size.Width, size.Height]; for (int x = 0; x < size.Width; x++) { for (int y = 0; y < size.Height; y++) { array[x, y] = int.MaxValue; } } return array; } Down to 450 ticks with the following: public int[,] CreateArray1(Size size) { int iX = size.Width; int iY = size.Height; int[,] array = new int[iX, iY]; for (int x = 0; x < iX; x++) { for (int y = 0; y < iY; y++) { array[x, y] = int.MaxValue; } } return array; } Down to approximately 165 ticks after a one-time initialization of 2800 ticks. (See my answer below.) If I can get stackalloc to work with multi-dimensional arrays, I should be able to get the same performance without having to intialize the private static array. private static bool _arrayInitialized5; private static int[,] _array5; public static int[,] CreateArray5(Size size) { if (!_arrayInitialized5) { int iX = size.Width; int iY = size.Height; _array5 = new int[iX, iY]; for (int x = 0; x < iX; x++) { for (int y = 0; y < iY; y++) { _array5[x, y] = int.MaxValue; } } _arrayInitialized5 = true; } return (int[,])_array5.Clone(); } Down to approximately 165 ticks without using the "clone technique" above. (See my answer below.) I am sure I can get the ticks lower, if I can just figure out the return of CreateArray9. public unsafe static int[,] CreateArray8(Size size) { int iX = size.Width; int iY = size.Height; int[,] array = new int[iX, iY]; fixed (int* pfixed = array) { int count = array.Length; for (int* p = pfixed; count-- > 0; p++) *p = int.MaxValue; } return array; }

  Read the article

• How to revert-back from SSL to non-SSL in Tomcat 6 ?

  - by mohamida

  I'm using jsf 2 + jaas + ssl + tomcat 6.0.26 I have in my web site 2 paths: /faces/protected/* which uses SSL /faces/unprotected/* which don't uses SSL. I've put this in my web.xml: <login-config> <auth-method>FORM</auth-method> <form-login-config> <form-login-page>/faces/login.jsp</form-login-page> <form-error-page>/faces/error.jsp</form-error-page> </form-login-config> </login-config> <security-constraint> <web-resource-collection> <web-resource-name>Secure Resource</web-resource-name> <description/> <url-pattern>/faces/unprotected/*</url-pattern> <http-method>GET</http-method> <http-method>POST</http-method> <http-method>HEAD</http-method> <http-method>PUT</http-method> <http-method>OPTIONS</http-method> <http-method>TRACE</http-method> <http-method>DELETE</http-method> </web-resource-collection> <auth-constraint> <role-name>C</role-name> </auth-constraint> </security-constraint> <security-constraint> <web-resource-collection> <web-resource-name>Secure Resource</web-resource-name> <description /> <url-pattern>/faces/protected/*</url-pattern> <http-method>GET</http-method> <http-method>POST</http-method> <http-method>HEAD</http-method> <http-method>PUT</http-method> <http-method>OPTIONS</http-method> <http-method>TRACE</http-method> <http-method>DELETE</http-method> </web-resource-collection> <auth-constraint> <role-name>C</role-name> </auth-constraint> <user-data-constraint> <transport-guarantee>CONFIDENTIAL</transport-guarantee> </user-data-constraint> </security-constraint> <security-role> <description> Role Client </description> <role-name>C</role-name> </security-role> and this is my server.xml: <Connector port="8080" protocol="HTTP/1.1" maxThreads="400" maxKeepAliveRequests="1" acceptCount="100" connectionTimeout="3000" redirectPort="8443" compression="on" compressionMinSize="2048" noCompressionUserAgents="gozilla, traviata" compressableMimeType="text/javascript,text/css,text/html, text/xml,text/plain,application/x-javascript,application/javascript,application/xhtml+xml" /> <Connector port="8443" protocol="org.apache.coyote.http11.Http11AprProtocol" SSLEnabled="true" maxThreads="400" scheme="https" secure="true" clientAuth="optional" sslProtocol="TLS" SSLCertificateFile="path/to/crt" SSLCertificateKeyFile="path/to/pem"/> when i enter to protected paths, it switches to HTTPS (port 8443), but when i enter to path /faces/unprotected/somthing... it stays using HTTPS. what i want is when i enter to unprotected paths, it revert-back to non-SSL communications ( otherwise, i have to re-login again when i set the exact adress in my browser). What's wrong with my configurations ? Is there a way so i can do such a thing ?

  Read the article

• build error with boost spirit grammar (boost 1.43 and g++ 4.4.1)

  - by lurscher

  I'm having issues getting a small spirit/qi grammar to compile. The build stack trace is fugly enought to not make any sense to me (despite some assertion_failed i could notice in there but that didn't brought much information) the input grammar header: inputGrammar.h #include <boost/config/warning_disable.hpp> #include <boost/spirit/include/qi.hpp> #include <boost/spirit/include/phoenix_core.hpp> #include <boost/spirit/include/phoenix_operator.hpp> #include <boost/spirit/include/phoenix_fusion.hpp> #include <boost/spirit/include/phoenix_stl.hpp> #include <boost/fusion/include/adapt_struct.hpp> #include <boost/variant/recursive_variant.hpp> #include <boost/foreach.hpp> #include <iostream> #include <fstream> #include <string> #include <vector> namespace sp = boost::spirit; namespace qi = boost::spirit::qi; using namespace boost::spirit::ascii; //using namespace boost::spirit::arg_names; namespace fusion = boost::fusion; namespace phoenix = boost::phoenix; using phoenix::at_c; using phoenix::push_back; template< typename Iterator , typename ExpressionAST > struct InputGrammar : qi::grammar<Iterator, ExpressionAST(), space_type> { InputGrammar() : InputGrammar::base_type( block ) { tag = sp::lexeme[+(alpha) [sp::_val += sp::_1]];//[+(char_ - '<') [_val += _1]]; block = sp::lit("block") [ at_c<0>(sp::_val) = sp::_1] >> "(" >> *instruction[ push_back( at_c<1>(sp::_val) , sp::_1 ) ] >> ")"; command = tag [ at_c<0>(sp::_val) = sp::_1] >> "(" >> *instruction [ push_back( at_c<1>(sp::_val) , sp::_1 )] >> ")"; instruction = ( command | tag ) [sp::_val = sp::_1]; } qi::rule< Iterator , std::string() , space_type > tag; qi::rule< Iterator , ExpressionAST() , space_type > block; qi::rule< Iterator , ExpressionAST() , space_type > function_def; qi::rule< Iterator , ExpressionAST() , space_type > command; qi::rule< Iterator , ExpressionAST() , space_type > instruction; }; the test build program: i seems the build fails at qi::phrase_parse, i am using boost 1.43 and g++ 4.4.1 #include <iostream> #include <string> #include <vector> using namespace std; //my grammar #include <InputGrammar.h> struct MockExpressionNode { std::string name; std::vector< MockExpressionNode > operands; typedef std::vector< MockExpressionNode >::iterator iterator; typedef std::vector< MockExpressionNode >::const_iterator const_iterator; iterator begin() { return operands.begin(); } const_iterator begin() const { return operands.begin(); } iterator end() { return operands.end(); } const_iterator end() const { return operands.end(); } bool is_leaf() const { return ( operands.begin() == operands.end() ); } }; BOOST_FUSION_ADAPT_STRUCT( MockExpressionNode, (std::string, name) (std::vector<MockExpressionNode>, operands) ) int const tabsize = 4; void tab(int indent) { for (int i = 0; i < indent; ++i) std::cout << ' '; } template< typename ExpressionNode > struct ExpressionNodePrinter { ExpressionNodePrinter(int indent = 0) : indent(indent) { } void operator()(ExpressionNode const& node) const { cout << " tag: " << node.name << endl; for (int i=0 ; i < node.operands.size() ; i++ ) { tab( indent ); cout << " arg "<<i<<": "; ExpressionNodePrinter(indent + 2)( node.operands[i]); cout << endl; } } int indent; }; int test() { MockExpressionNode root; InputGrammar< string::const_iterator , MockExpressionNode > g(); std::string litA = "litA"; std::string litB = "litB"; std::string litC = "litC"; std::string litD = "litD"; std::string litE = "litE"; std::string litF = "litF"; std::string source = litA+"( "+litB+" ,"+litC+" , "+ litD+" ( "+litE+", "+litF+" ) "+ " )"; string::const_iterator iter = source.begin(); string::const_iterator end = source.end(); bool r = qi::phrase_parse( iter , end , g , root , space ); ExpressionNodePrinter< MockExpressionNode > np; np( root ); }; int main() { test(); } finally, the build error is the following: /usr/bin/make -f nbproject/Makefile-linux_amd64_devel.mk SUBPROJECTS= .build-conf make[1]: se ingresa al directorio `/home/mineq/NetBeansProjects/InputParserTests' /usr/bin/make -f nbproject/Makefile-linux_amd64_devel.mk dist/linux_amd64_devel/GNU-Linux-x86/vpuinputparsertests make[2]: se ingresa al directorio `/home/mineq/NetBeansProjects/InputParserTests' mkdir -p build/linux_amd64_devel/GNU-Linux-x86 rm -f build/linux_amd64_devel/GNU-Linux-x86/tests_main.o.d g++ `llvm-config --cxxflags` `pkg-config --cflags unittest-cpp` `pkg-config --cflags boost-1.43` `pkg-config --cflags boost-coroutines` -c -g -I../InputParser -MMD -MP -MF build/linux_amd64_devel/GNU-Linux-x86/tests_main.o.d -o build/linux_amd64_devel/GNU-Linux-x86/tests_main.o tests_main.cpp from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto.hpp:16, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp: In function ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’: In file included from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/detail/parse_auto.hpp:14, /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:99: error: no matching function for call to ‘assertion_failed(mpl_::failed************ (boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]::error_invalid_expression::************)(InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode> (*)()))’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:100: error: no matching function for call to ‘assertion_failed(mpl_::failed************ (boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]::error_invalid_expression::************)(MockExpressionNode))’ from /home/mineq/third_party/boost_1_43_0/boost/proto/proto.hpp:12, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/support/meta_compiler.hpp:17, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/meta_compiler.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/action/action.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/action.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/proto/detail/expr0.hpp: At global scope: /home/mineq/third_party/boost_1_43_0/boost/proto/proto_fwd.hpp: In instantiation of ‘boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()>, 0l>’: In file included from /home/mineq/third_party/boost_1_43_0/boost/proto/core.hpp:13, /home/mineq/third_party/boost_1_43_0/boost/utility/enable_if.hpp:59: instantiated from ‘boost::disable_if<boost::proto::result_of::is_expr<boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()>, 0l>, void>, void>’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/support/meta_compiler.hpp:200: instantiated from ‘boost::spirit::result_of::compile<boost::spirit::qi::domain, InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), boost::fusion::unused_type, void>’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:107: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/proto/detail/expr0.hpp:64: error: field ‘boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()>, 0l>::child0’ invalidly declared function type from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto.hpp:16, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp: In function ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’: In file included from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/detail/parse_auto.hpp:14, /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:107: error: request for member ‘parse’ in ‘boost::spirit::compile [with Domain = boost::spirit::qi::domain, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()](((InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode> (&)())((InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode> (*)())expr)))’, which is of non-class type ‘InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()’ from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/skip_over.hpp: In function ‘void boost::spirit::qi::skip_over(Iterator&, const Iterator&, const T&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, T = boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]::skipper_type]’: In file included from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto/auto.hpp:19, /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:112: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/skip_over.hpp:27: error: ‘const struct MockExpressionNode’ has no member named ‘parse’ make[2]: *** [build/linux_amd64_devel/GNU-Linux-x86/tests_main.o] Error 1 make[2]: se sale del directorio `/home/mineq/NetBeansProjects/InputParserTests' make[1]: *** [.build-conf] Error 2 make[1]: se sale del directorio `/home/mineq/NetBeansProjects/InputParserTests' make: *** [.build-impl] Error 2 BUILD FAILED (exit value 2, total time: 1m 48s)

  Read the article

• Non recursive way to position a genogram in 2D points for x axis. Descendant are below

  - by Nassign

  I currently was tasked to make a genogram for a family consisting of siblings, parents with aunts and uncles with grandparents and greatgrandparents for only blood relatives. My current algorithm is using recursion. but I am wondering how to do it in non recursive way to make it more efficient. it is programmed in c# using graphics to draw on a bitmap. Current algorithm for calculating x position, the y position is by getting the generation number. public void StartCalculatePosition() { // Search the start node (The only node with targetFlg set to true) Person start = null; foreach (Person p in PersonDic.Values) { if (start == null) start = p; if (p.Targetflg) { start = p; break; } } CalcPositionRecurse(start); // Normalize the position (shift all values to positive value) // Get the minimum value (must be negative) // Then offset the position of all marriage and person with that to make it start from zero float minPosition = float.MaxValue; foreach (Person p in PersonDic.Values) { if (minPosition > p.Position) { minPosition = p.Position; } } if (minPosition < 0) { foreach (Person p in PersonDic.Values) { p.Position -= minPosition; } foreach (Marriage m in MarriageList) { m.ParentsPosition -= minPosition; m.ChildrenPosition -= minPosition; } } } /// <summary> /// Calculate position of genogram using recursion /// </summary> /// <param name="psn"></param> private void CalcPositionRecurse(Person psn) { // End the recursion if (psn.BirthMarriage == null || psn.BirthMarriage.Parents.Count == 0) { psn.Position = 0.0f; if (psn.BirthMarriage != null) { psn.BirthMarriage.ParentsPosition = 0.0f; psn.BirthMarriage.ChildrenPosition = 0.0f; } CalculateSiblingPosition(psn); return; } // Left recurse if (psn.Father != null) { CalcPositionRecurse(psn.Father); } // Right recurse if (psn.Mother != null) { CalcPositionRecurse(psn.Mother); } // Merge Position if (psn.Father != null && psn.Mother != null) { AdjustConflict(psn.Father, psn.Mother); // Position person in center of parent psn.Position = (psn.Father.Position + psn.Mother.Position) / 2; psn.BirthMarriage.ParentsPosition = psn.Position; psn.BirthMarriage.ChildrenPosition = psn.Position; } else { // Single mom or single dad if (psn.Father != null) { psn.Position = psn.Father.Position; psn.BirthMarriage.ParentsPosition = psn.Position; psn.BirthMarriage.ChildrenPosition = psn.Position; } else if (psn.Mother != null) { psn.Position = psn.Mother.Position; psn.BirthMarriage.ParentsPosition = psn.Position; psn.BirthMarriage.ChildrenPosition = psn.Position; } else { // Should not happen, checking in start of function } } // Arrange the siblings base on my position (left younger, right older) CalculateSiblingPosition(psn); } private float GetRightBoundaryAncestor(Person psn) { float rPos = psn.Position; // Get the rightmost position among siblings foreach (Person sibling in psn.Siblings) { if (sibling.Position > rPos) { rPos = sibling.Position; } } if (psn.Father != null) { float rFatherPos = GetRightBoundaryAncestor(psn.Father); if (rFatherPos > rPos) { rPos = rFatherPos; } } if (psn.Mother != null) { float rMotherPos = GetRightBoundaryAncestor(psn.Mother); if (rMotherPos > rPos) { rPos = rMotherPos; } } return rPos; } private float GetLeftBoundaryAncestor(Person psn) { float rPos = psn.Position; // Get the rightmost position among siblings foreach (Person sibling in psn.Siblings) { if (sibling.Position < rPos) { rPos = sibling.Position; } } if (psn.Father != null) { float rFatherPos = GetLeftBoundaryAncestor(psn.Father); if (rFatherPos < rPos) { rPos = rFatherPos; } } if (psn.Mother != null) { float rMotherPos = GetLeftBoundaryAncestor(psn.Mother); if (rMotherPos < rPos) { rPos = rMotherPos; } } return rPos; } /// <summary> /// Check if two parent group has conflict and compensate on the conflict /// </summary> /// <param name="leftGroup"></param> /// <param name="rightGroup"></param> public void AdjustConflict(Person leftGroup, Person rightGroup) { float leftMax = GetRightBoundaryAncestor(leftGroup); leftMax += 0.5f; float rightMin = GetLeftBoundaryAncestor(rightGroup); rightMin -= 0.5f; float diff = leftMax - rightMin; if (diff > 0.0f) { float moveHalf = Math.Abs(diff) / 2; RecurseMoveAncestor(leftGroup, 0 - moveHalf); RecurseMoveAncestor(rightGroup, moveHalf); } } /// <summary> /// Recursively move a person and all his/her ancestor /// </summary> /// <param name="psn"></param> /// <param name="moveUnit"></param> public void RecurseMoveAncestor(Person psn, float moveUnit) { psn.Position += moveUnit; foreach (Person siblings in psn.Siblings) { if (siblings.Id != psn.Id) { siblings.Position += moveUnit; } } if (psn.BirthMarriage != null) { psn.BirthMarriage.ChildrenPosition += moveUnit; psn.BirthMarriage.ParentsPosition += moveUnit; } if (psn.Father != null) { RecurseMoveAncestor(psn.Father, moveUnit); } if (psn.Mother != null) { RecurseMoveAncestor(psn.Mother, moveUnit); } } /// <summary> /// Calculate the position of the siblings /// </summary> /// <param name="psn"></param> /// <param name="anchor"></param> public void CalculateSiblingPosition(Person psn) { if (psn.Siblings.Count == 0) { return; } List<Person> sibling = psn.Siblings; int argidx; for (argidx = 0; argidx < sibling.Count; argidx++) { if (sibling[argidx].Id == psn.Id) { break; } } // Compute position for each brother that is younger that person int idx; for (idx = argidx - 1; idx >= 0; idx--) { sibling[idx].Position = sibling[idx + 1].Position - 1; } for (idx = argidx + 1; idx < sibling.Count; idx++) { sibling[idx].Position = sibling[idx - 1].Position + 1; } }

  Read the article

• Default /etc/apt/sources.list?

  - by piemesons

  I need default source list for ubuntu 10.04. Can anybody help me? Here is Mine:--- Ubuntu supported packages deb http://archive.ubuntu.com/ubuntu/ lucid main restricted multiverse universe deb http://archive.ubuntu.com/ubuntu/ lucid-backports main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ lucid-updates main restricted multiverse universe deb http://security.ubuntu.com/ubuntu lucid-security main restricted universe multiverse deb http://security.ubuntu.com/ubuntu lucid-proposed main restricted universe multiverse deb-src http://archive.ubuntu.com/ubuntu/ lucid main restricted multiverse universe deb-src http://archive.ubuntu.com/ubuntu/ lucid-backports main restricted universe multiverse deb-src http://archive.ubuntu.com/ubuntu/ lucid-updates main restricted multiverse universe deb-src http://security.ubuntu.com/ubuntu lucid-security main restricted universe multiverse deb-src http://security.ubuntu.com/ubuntu lucid-proposed main restricted universe multiverse Canonical Commercial Repository deb http://archive.canonical.com/ubuntu lucid partner deb http://archive.canonical.com/ubuntu lucid-backports partner deb http://archive.canonical.com/ubuntu lucid-updates partner deb http://archive.canonical.com/ubuntu lucid-security partner deb http://archive.canonical.com/ubuntu lucid-proposed partner deb-src http://archive.canonical.com/ubuntu lucid partner deb-src http://archive.canonical.com/ubuntu lucid-backports partner deb-src http://archive.canonical.com/ubuntu lucid-updates partner deb-src http://archive.canonical.com/ubuntu lucid-security partner deb-src http://archive.canonical.com/ubuntu lucid-proposed partner medibuntu deb http://packages.medibuntu.org/ lucid free non-free deb-src http://packages.medibuntu.org/ lucid free non-free PlayOnLinux deb http://deb.playonlinux.com/ lucid main opera deb http://deb.opera.com/opera/ lenny non-free google deb http://dl.google.com/linux/deb/ stable non-free main Dropbox Official Source deb http://linux.dropbox.com/ubuntu karmic main Skype deb http://download.skype.com/linux/repos/debian/ stable non-free This is the error i am getting:-- (sudo apt-get update) Get:9 http://dl.google.com stable/main Packages [1,076B] Err http://ppa.launchpad.net lucid/main Packages 404 Not Found Get:10 http://dl.google.com stable/main Packages [735B] and finally :-- Fetched 9,724B in 3s (2,645B/s) W: Failed to fetch http://ppa.launchpad.net/bisig/ppa/ubuntu/dists/lucid/main/binary-i386/Packages.gz 404 Not Found E: Some index files failed to download, they have been ignored, or old ones used instead.

  Read the article

• PPA causing 404 error?

  - by piemesons

  I need default source list for ubuntu 10.04. Can anybody help me? Here is Mine:--- Ubuntu supported packages deb http://archive.ubuntu.com/ubuntu/ lucid main restricted multiverse universe deb http://archive.ubuntu.com/ubuntu/ lucid-backports main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ lucid-updates main restricted multiverse universe deb http://security.ubuntu.com/ubuntu lucid-security main restricted universe multiverse deb http://security.ubuntu.com/ubuntu lucid-proposed main restricted universe multiverse deb-src http://archive.ubuntu.com/ubuntu/ lucid main restricted multiverse universe deb-src http://archive.ubuntu.com/ubuntu/ lucid-backports main restricted universe multiverse deb-src http://archive.ubuntu.com/ubuntu/ lucid-updates main restricted multiverse universe deb-src http://security.ubuntu.com/ubuntu lucid-security main restricted universe multiverse deb-src http://security.ubuntu.com/ubuntu lucid-proposed main restricted universe multiverse Canonical Commercial Repository deb http://archive.canonical.com/ubuntu lucid partner deb http://archive.canonical.com/ubuntu lucid-backports partner deb http://archive.canonical.com/ubuntu lucid-updates partner deb http://archive.canonical.com/ubuntu lucid-security partner deb http://archive.canonical.com/ubuntu lucid-proposed partner deb-src http://archive.canonical.com/ubuntu lucid partner deb-src http://archive.canonical.com/ubuntu lucid-backports partner deb-src http://archive.canonical.com/ubuntu lucid-updates partner deb-src http://archive.canonical.com/ubuntu lucid-security partner deb-src http://archive.canonical.com/ubuntu lucid-proposed partner medibuntu deb http://packages.medibuntu.org/ lucid free non-free deb-src http://packages.medibuntu.org/ lucid free non-free PlayOnLinux deb http://deb.playonlinux.com/ lucid main opera deb http://deb.opera.com/opera/ lenny non-free google deb http://dl.google.com/linux/deb/ stable non-free main Dropbox Official Source deb http://linux.dropbox.com/ubuntu karmic main Skype deb http://download.skype.com/linux/repos/debian/ stable non-free This is the error i am getting:-- (sudo apt-get update) Get:9 http://dl.google.com stable/main Packages [1,076B] Err http://ppa.launchpad.net lucid/main Packages 404 Not Found Get:10 http://dl.google.com stable/main Packages [735B] and finally :-- Fetched 9,724B in 3s (2,645B/s) W: Failed to fetch http://ppa.launchpad.net/bisig/ppa/ubuntu/dists/lucid/main/binary-i386/Packages.gz 404 Not Found E: Some index files failed to download, they have been ignored, or old ones used instead.

  Read the article

• Something for the weekend - Whats the most complex query?

  - by simonsabin

  Whenever I teach about SQL Server performance tuning I try can get across the message that there is no such thing as a table. Does that sound odd, well it isn't, trust me. Rather than tables you need to consider structures. You have 1. Heaps 2. Indexes (b-trees) Some people split indexes in two, clustered and non-clustered, this I feel confuses the situation as people associate clustered indexes with sorting, but don't associate non clustered indexes with sorting, this is wrong. Clustered and non-clustered indexes are the same b-tree structure(and even more so with SQL 2005) with the leaf pages sorted in a linked list according to the keys of the index.. The difference is that non clustered indexes include in their structure either, the clustered key(s), or the row identifier for the row in the table (see http://sqlblog.com/blogs/kalen_delaney/archive/2008/03/16/nonclustered-index-keys.aspx for more details). Beyond that they are the same, they have key columns which are stored on the root and intermediary pages, and included columns which are on the leaf level. The reason this is important is that this is how the optimiser sees the world, this means it can use any of these structures to resolve your query. Even if your query only accesses one table, the optimiser can access multiple structures to get your results. One commonly sees this with a non-clustered index scan and then a key lookup (clustered index seek), but importantly it's not restricted to just using one non-clustered index and the clustered index or heap, and that's the challenge for the weekend. So the challenge for the weekend is to produce the most complex single table query. For those clever bods amongst you that are thinking, great I will just use lots of xquery functions, sorry these are the rules. 1. You have to use a table from AdventureWorks (2005 or 2008) 2. You can add whatever indexes you like, but you must document these 3. You cannot use XQuery, Spatial, HierarchyId, Full Text or any open rowset function. 4. You can only reference your table once, i..e a FROM clause with ONE table and no JOINs 5. No Sub queries. The aim of this is to show how the optimiser can use multiple structures to build the results of a query and to also highlight why the optimiser is doing that. How many structures can you get the optimiser to use? As an example create these two indexes on AdventureWorks2008 create index IX_Person_Person on Person.Person (lastName, FirstName,NameStyle,PersonType) create index IX_Person_Person on Person.Person(BusinessentityId,ModifiedDate)with drop_existing    select lastName, ModifiedDate   from Person.Person  where LastName = 'Smith' You will see that the optimiser has decided to not access the underlying clustered index of the table but to use two indexes above to resolve the query. This highlights how the optimiser considers all storage structures, clustered indexes, non clustered indexes and heaps when trying to resolve a query. So are you up to the challenge for the weekend to produce the most complex single table query? The prize is a pdf version of a popular SQL Server book, or a physical book if you live in the UK.  

  Read the article

• Beware Sneaky Reads with Unique Indexes

  - by Paul White NZ

  A few days ago, Sandra Mueller (twitter | blog) asked a question using twitter’s #sqlhelp hash tag: “Might SQL Server retrieve (out-of-row) LOB data from a table, even if the column isn’t referenced in the query?” Leaving aside trivial cases (like selecting a computed column that does reference the LOB data), one might be tempted to say that no, SQL Server does not read data you haven’t asked for.  In general, that’s quite correct; however there are cases where SQL Server might sneakily retrieve a LOB column… Example Table Here’s a T-SQL script to create that table and populate it with 1,000 rows: CREATE TABLE dbo.LOBtest ( pk INTEGER IDENTITY NOT NULL, some_value INTEGER NULL, lob_data VARCHAR(MAX) NULL, another_column CHAR(5) NULL, CONSTRAINT [PK dbo.LOBtest pk] PRIMARY KEY CLUSTERED (pk ASC) ); GO DECLARE @Data VARCHAR(MAX); SET @Data = REPLICATE(CONVERT(VARCHAR(MAX), 'x'), 65540);   WITH Numbers (n) AS ( SELECT ROW_NUMBER() OVER (ORDER BY (SELECT 0)) FROM master.sys.columns C1, master.sys.columns C2 ) INSERT LOBtest WITH (TABLOCKX) ( some_value, lob_data ) SELECT TOP (1000) N.n, @Data FROM Numbers N WHERE N.n <= 1000; Test 1: A Simple Update Let’s run a query to subtract one from every value in the some_value column: UPDATE dbo.LOBtest WITH (TABLOCKX) SET some_value = some_value - 1; As you might expect, modifying this integer column in 1,000 rows doesn’t take very long, or use many resources.  The STATITICS IO and TIME output shows a total of 9 logical reads, and 25ms elapsed time.  The query plan is also very simple: Looking at the Clustered Index Scan, we can see that SQL Server only retrieves the pk and some_value columns during the scan: The pk column is needed by the Clustered Index Update operator to uniquely identify the row that is being changed.  The some_value column is used by the Compute Scalar to calculate the new value.  (In case you are wondering what the Top operator is for, it is used to enforce SET ROWCOUNT). Test 2: Simple Update with an Index Now let’s create a nonclustered index keyed on the some_value column, with lob_data as an included column: CREATE NONCLUSTERED INDEX [IX dbo.LOBtest some_value (lob_data)] ON dbo.LOBtest (some_value) INCLUDE ( lob_data ) WITH ( FILLFACTOR = 100, MAXDOP = 1, SORT_IN_TEMPDB = ON ); This is not a useful index for our simple update query; imagine that someone else created it for a different purpose.  Let’s run our update query again: UPDATE dbo.LOBtest WITH (TABLOCKX) SET some_value = some_value - 1; We find that it now requires 4,014 logical reads and the elapsed query time has increased to around 100ms.  The extra logical reads (4 per row) are an expected consequence of maintaining the nonclustered index. The query plan is very similar to before (click to enlarge): The Clustered Index Update operator picks up the extra work of maintaining the nonclustered index. The new Compute Scalar operators detect whether the value in the some_value column has actually been changed by the update.  SQL Server may be able to skip maintaining the nonclustered index if the value hasn’t changed (see my previous post on non-updating updates for details).  Our simple query does change the value of some_data in every row, so this optimization doesn’t add any value in this specific case. The output list of columns from the Clustered Index Scan hasn’t changed from the one shown previously: SQL Server still just reads the pk and some_data columns.  Cool. Overall then, adding the nonclustered index hasn’t had any startling effects, and the LOB column data still isn’t being read from the table.  Let’s see what happens if we make the nonclustered index unique. Test 3: Simple Update with a Unique Index Here’s the script to create a new unique index, and drop the old one: CREATE UNIQUE NONCLUSTERED INDEX [UQ dbo.LOBtest some_value (lob_data)] ON dbo.LOBtest (some_value) INCLUDE ( lob_data ) WITH ( FILLFACTOR = 100, MAXDOP = 1, SORT_IN_TEMPDB = ON ); GO DROP INDEX [IX dbo.LOBtest some_value (lob_data)] ON dbo.LOBtest; Remember that SQL Server only enforces uniqueness on index keys (the some_data column).  The lob_data column is simply stored at the leaf-level of the non-clustered index.  With that in mind, we might expect this change to make very little difference.  Let’s see: UPDATE dbo.LOBtest WITH (TABLOCKX) SET some_value = some_value - 1; Whoa!  Now look at the elapsed time and logical reads: Scan count 1, logical reads 2016, physical reads 0, read-ahead reads 0, lob logical reads 36015, lob physical reads 0, lob read-ahead reads 15992.   CPU time = 172 ms, elapsed time = 16172 ms. Even with all the data and index pages in memory, the query took over 16 seconds to update just 1,000 rows, performing over 52,000 LOB logical reads (nearly 16,000 of those using read-ahead). Why on earth is SQL Server reading LOB data in a query that only updates a single integer column? The Query Plan The query plan for test 3 looks a bit more complex than before: In fact, the bottom level is exactly the same as we saw with the non-unique index.  The top level has heaps of new stuff though, which I’ll come to in a moment. You might be expecting to find that the Clustered Index Scan is now reading the lob_data column (for some reason).  After all, we need to explain where all the LOB logical reads are coming from.  Sadly, when we look at the properties of the Clustered Index Scan, we see exactly the same as before: SQL Server is still only reading the pk and some_value columns – so what’s doing the LOB reads? Updates that Sneakily Read Data We have to go as far as the Clustered Index Update operator before we see LOB data in the output list: [Expr1020] is a bit flag added by an earlier Compute Scalar.  It is set true if the some_value column has not been changed (part of the non-updating updates optimization I mentioned earlier). The Clustered Index Update operator adds two new columns: the lob_data column, and some_value_OLD.  The some_value_OLD column, as the name suggests, is the pre-update value of the some_value column.  At this point, the clustered index has already been updated with the new value, but we haven’t touched the nonclustered index yet. An interesting observation here is that the Clustered Index Update operator can read a column into the data flow as part of its update operation.  SQL Server could have read the LOB data as part of the initial Clustered Index Scan, but that would mean carrying the data through all the operations that occur prior to the Clustered Index Update.  The server knows it will have to go back to the clustered index row to update it, so it delays reading the LOB data until then.  Sneaky! Why the LOB Data Is Needed This is all very interesting (I hope), but why is SQL Server reading the LOB data?  For that matter, why does it need to pass the pre-update value of the some_value column out of the Clustered Index Update? The answer relates to the top row of the query plan for test 3.  I’ll reproduce it here for convenience: Notice that this is a wide (per-index) update plan.  SQL Server used a narrow (per-row) update plan in test 2, where the Clustered Index Update took care of maintaining the nonclustered index too.  I’ll talk more about this difference shortly. The Split/Sort/Collapse combination is an optimization, which aims to make per-index update plans more efficient.  It does this by breaking each update into a delete/insert pair, reordering the operations, removing any redundant operations, and finally applying the net effect of all the changes to the nonclustered index. Imagine we had a unique index which currently holds three rows with the values 1, 2, and 3.  If we run a query that adds 1 to each row value, we would end up with values 2, 3, and 4.  The net effect of all the changes is the same as if we simply deleted the value 1, and added a new value 4. By applying net changes, SQL Server can also avoid false unique-key violations.  If we tried to immediately update the value 1 to a 2, it would conflict with the existing value 2 (which would soon be updated to 3 of course) and the query would fail.  You might argue that SQL Server could avoid the uniqueness violation by starting with the highest value (3) and working down.  That’s fine, but it’s not possible to generalize this logic to work with every possible update query. SQL Server has to use a wide update plan if it sees any risk of false uniqueness violations.  It’s worth noting that the logic SQL Server uses to detect whether these violations are possible has definite limits.  As a result, you will often receive a wide update plan, even when you can see that no violations are possible. Another benefit of this optimization is that it includes a sort on the index key as part of its work.  Processing the index changes in index key order promotes sequential I/O against the nonclustered index. A side-effect of all this is that the net changes might include one or more inserts.  In order to insert a new row in the index, SQL Server obviously needs all the columns – the key column and the included LOB column.  This is the reason SQL Server reads the LOB data as part of the Clustered Index Update. In addition, the some_value_OLD column is required by the Split operator (it turns updates into delete/insert pairs).  In order to generate the correct index key delete operation, it needs the old key value. The irony is that in this case the Split/Sort/Collapse optimization is anything but.  Reading all that LOB data is extremely expensive, so it is sad that the current version of SQL Server has no way to avoid it. Finally, for completeness, I should mention that the Filter operator is there to filter out the non-updating updates. Beating the Set-Based Update with a Cursor One situation where SQL Server can see that false unique-key violations aren’t possible is where it can guarantee that only one row is being updated.  Armed with this knowledge, we can write a cursor (or the WHILE-loop equivalent) that updates one row at a time, and so avoids reading the LOB data: SET NOCOUNT ON; SET STATISTICS XML, IO, TIME OFF;   DECLARE @PK INTEGER, @StartTime DATETIME; SET @StartTime = GETUTCDATE();   DECLARE curUpdate CURSOR LOCAL FORWARD_ONLY KEYSET SCROLL_LOCKS FOR SELECT L.pk FROM LOBtest L ORDER BY L.pk ASC;   OPEN curUpdate;   WHILE (1 = 1) BEGIN FETCH NEXT FROM curUpdate INTO @PK;   IF @@FETCH_STATUS = -1 BREAK; IF @@FETCH_STATUS = -2 CONTINUE;   UPDATE dbo.LOBtest SET some_value = some_value - 1 WHERE CURRENT OF curUpdate; END;   CLOSE curUpdate; DEALLOCATE curUpdate;   SELECT DATEDIFF(MILLISECOND, @StartTime, GETUTCDATE()); That completes the update in 1280 milliseconds (remember test 3 took over 16 seconds!) I used the WHERE CURRENT OF syntax there and a KEYSET cursor, just for the fun of it.  One could just as well use a WHERE clause that specified the primary key value instead. Clustered Indexes A clustered index is the ultimate index with included columns: all non-key columns are included columns in a clustered index.  Let’s re-create the test table and data with an updatable primary key, and without any non-clustered indexes: IF OBJECT_ID(N'dbo.LOBtest', N'U') IS NOT NULL DROP TABLE dbo.LOBtest; GO CREATE TABLE dbo.LOBtest ( pk INTEGER NOT NULL, some_value INTEGER NULL, lob_data VARCHAR(MAX) NULL, another_column CHAR(5) NULL, CONSTRAINT [PK dbo.LOBtest pk] PRIMARY KEY CLUSTERED (pk ASC) ); GO DECLARE @Data VARCHAR(MAX); SET @Data = REPLICATE(CONVERT(VARCHAR(MAX), 'x'), 65540);   WITH Numbers (n) AS ( SELECT ROW_NUMBER() OVER (ORDER BY (SELECT 0)) FROM master.sys.columns C1, master.sys.columns C2 ) INSERT LOBtest WITH (TABLOCKX) ( pk, some_value, lob_data ) SELECT TOP (1000) N.n, N.n, @Data FROM Numbers N WHERE N.n <= 1000; Now here’s a query to modify the cluster keys: UPDATE dbo.LOBtest SET pk = pk + 1; The query plan is: As you can see, the Split/Sort/Collapse optimization is present, and we also gain an Eager Table Spool, for Halloween protection.  In addition, SQL Server now has no choice but to read the LOB data in the Clustered Index Scan: The performance is not great, as you might expect (even though there is no non-clustered index to maintain): Table 'LOBtest'. Scan count 1, logical reads 2011, physical reads 0, read-ahead reads 0, lob logical reads 36015, lob physical reads 0, lob read-ahead reads 15992.   Table 'Worktable'. Scan count 1, logical reads 2040, physical reads 0, read-ahead reads 0, lob logical reads 34000, lob physical reads 0, lob read-ahead reads 8000.   SQL Server Execution Times: CPU time = 483 ms, elapsed time = 17884 ms. Notice how the LOB data is read twice: once from the Clustered Index Scan, and again from the work table in tempdb used by the Eager Spool. If you try the same test with a non-unique clustered index (rather than a primary key), you’ll get a much more efficient plan that just passes the cluster key (including uniqueifier) around (no LOB data or other non-key columns): A unique non-clustered index (on a heap) works well too: Both those queries complete in a few tens of milliseconds, with no LOB reads, and just a few thousand logical reads.  (In fact the heap is rather more efficient). There are lots more fun combinations to try that I don’t have space for here. Final Thoughts The behaviour shown in this post is not limited to LOB data by any means.  If the conditions are met, any unique index that has included columns can produce similar behaviour – something to bear in mind when adding large INCLUDE columns to achieve covering queries, perhaps. Paul White Email: [email protected] Twitter: @PaulWhiteNZ

  Read the article

• Exception injection: Throwing an exception in other thread

  How to abort a non-cooperating thread by an exception

  Read the article

• XBRL y Reporting Regulatorio con Oracle Hyperion 11.1.2

  - by eva.mier(at)oracle.com

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Una de las grandes novedades de la nueva versión de Gestión del rendimiento de Oracle Hyperion, es la incorporación de una solución completa e integrada para el Reporting XBRL y cualquier otra presentación o submisión de  información, en los formatos oficiales requeridos por entidades regulatorias (Reporting Banco de España, Comisión Nacional del Mercado de Valores, SEC 10Q/K, etc). Basado en Microsoft Word y Excel, proporciona al usuario de negocio un entorno  de creación  y cumplimentación  de formatos XBRL muy sencillo, que permite desmitificar el trabajo y costes asociados al cumplimiento regulatorio.

  Read the article

• Merck Serono Gains Deep Understanding of Product Portfolio Value-Drivers, Risks, and Sales Expectations Through Forecasting Solution

  - by Melissa Centurio Lopes

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Merck Serono S.A. is the biopharmaceutical division of Merck KGaA. It offers leading brands in 150 countries to help patients with cancer, multiple sclerosis, infertility, endocrine and metabolic disorders, as well as cardiovascular diseases. Challenges: Establish a better decision-making framework for its complex, development portfolio of pharmaceutical products, where single-point estimates or expected averages of portfolio values, portfolio risks, and sales forecasts are insufficient and can be misleading Enable the company to be aware at all times of the range of possible outcomes of technical and market risks and uncertainties, such as the technical uncertainty of whether a product will produce the desired clinical outcomes, or the market-related uncertainty of whether a product will be outperformed by its competitors Solutions to Overcome the Challenges: Used Oracle Crystal Ball to devise a Monte-Carlo-based approach to better analyze and define the values and risks of the company’s development portfolio, laying the groundwork for optimized decision-making Enabled a better understanding of the range of potential values and risks to improve portfolio planning Enabled detailed analysis of the likelihood of favorable or unfavorable outcomes, such as the likelihood of whether Merck Serono can meet its sales targets planned for the next ten years with its existing product portfolio Gained the ability to take into account correlative risks, synergies and project interactions, enabling Merck Serono to better forecast what the company may achieve—for example, that there is a 70% probability of a particular sales target being met Established Monte-Carlo-based analysis using Oracle Crystal Ball as a useful element in decision-making at the board level, as the approach provides a better analysis of values and risks associated with the company’s product portfolio “Oracle Crystal Ball enables us to make Monte Carlo simulations of the potential value and sales of our development portfolio. It is a very powerful tool for gaining a thorough understanding and improved awareness of value drivers, uncertainties, and risks, along with associated probabilities.” – Riccardo Lampariello, Associate Director, Merck Serono S.A Why Oracle “We chose Oracle Crystal Ball to enable us to perform Monte Carlo analysis, which gives us a deeper understanding and improved awareness of the value drivers, uncertainties and risks of our portfolio of development projects,” said Kimber Hardy, head of valuation and analysis, Merck Serono S.A. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Click here to read the full version of the customer success story Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Microsoft Sponsored - Give Camp

  - by Ken Lovely, MCSE, MCDBA, MCTS

  Are you ready to connect with the local tech community for a good cause? GiveCamp needs your support. For one weekend in June, we’ll take on the technology wish lists of 20 non-profit organizations, and we’re looking for about 100 volunteers, both technical and non-technical, to help us do it. A typical GiveCamp draws 75 to 100 volunteers. Individuals can work with their colleagues in company teams, or they can opt to be matched with fellow volunteers who have complementary skill sets. Everyone is welcome to head home for the evenings – but there are always the diehards who work from Friday kickoff straight through Sunday afternoon. Food and drinks, especially of the caffeinated variety, are provided, along with game systems for breaks. Technical volunteers We're looking for graphic or UX designers, developers with .NET/Java/LAMP/Open Source/CMS experience, project managers, system/network administrators, DBAs, and non-profit technical consultants and web strategists. Non-technical volunteers Beyond the technology, there are many other aspects that make GiveCamp a success. We need non-technical volunteers to run errands, help with setting up and cleaning up, and everything in between. Whether you can offer a couple hours of your time or join GiveCamp for a couple days, your support is needed Sign up at; http://www.eventbrite.com/event/650615007 Feel free to contact me or Dani Diaz of Microsoft for more information

  Read the article

• Data Masking for Oracle E-Business Suite

  - by Troy Kitch

  E-Business Suite customers can now use Oracle Data Masking to obscure sensitive information in non-production environments. Many organizations are inadvertently exposed when copying sensitive or regulated production data into non-production database environments for development, quality assurance or outsourcing purposes. Due to weak security controls and unmonitored access, these non-production environments have increasingly become the target of cyber criminals. Learn more about the announcement here.

  Read the article

• User-Defined Customer Events & their impact (FA Type Profile)

  - by Rajesh Sharma

  CC&B automatically creates field activities when a specific Customer Event takes place. This depends on the way you have setup your Field Activity Type Profiles, the templates within, and associated SP Condition(s) on the template. CC&B uses the service point type, its state and referenced customer event to determine which field activity type to generate.   Customer events available in the base product include: Cut for Non-payment (CNP) Disconnect Warning (DIWA) Reconnect for Payment (REPY) Reread (RERD) Stop Service (STOP) Start Service (STRT) Start/Stop (STSP)   Note the Field values/codes defined for each event.   CC&B comes with a flexibility to define new set of customer events. These can be defined in the Look Up - CUST_EVT_FLG. Values from the Look Up are used on the Field Activity Type Profile Template page.     So what's the use of having user-defined Customer Events? And how will the system detect such events in order to create field activity(s)?   Well, system can only detect such events when you reference a user-defined customer event on a Severance Event Type for an event type Create Field Activities.     This way you can create additional field activities of a specific field activity type for user-defined customer events.   One of our customers adopted this feature and created a user-defined customer event CNPW - Cut for Non-payment for Water Services. This event was then linked on a Field Activity Type Profile and referenced on a Severance Event - CUT FOR NON PAY-W. The associated Severance Process was configured to trigger a reconnection process if it was cancelled (done by defining a Post Cancel Algorithm). Whenever this Severance Event was executed, a specific type of Field Activity was generated for disconnection purposes. The Field Activity type was determined by the system from the Field Activity Type Profile referenced for the SP Type, SP's state and the referenced user-defined customer event. All was working well until the time when they realized that in spite of the Severance Process getting cancelled (when a payment was made); the Post Cancel Algorithm was not executed to start a Reconnection Severance Process for the purpose of generating a reconnection field activity and reconnecting the service.   Basically, the Post Cancel algorithm (if specified on a Severance Process Template) is triggered when a Severance Process gets cancelled because a credit transaction has affected/relieved a Service Agreement's debt.   So what exactly was happening? Now we come to actual question as to what is the impact in having a user-defined customer event.   System defined/base customer events are hard-coded across the entire system. There is an impact even if you remove any customer event entry from the Look Up. User-defined customer events are not recognized by the system anywhere else except in the severance process, as described above.   There are few programs which have routines to first validate the completion of disconnection field activities, which were raised as a result of customer event CNP - Cut for Non-payment in order to perform other associated actions. One such program is the Post Cancel Algorithm, referenced on a Severance Process Template, generally used to reconnect services which were disconnected from other Severance Event, specifically CNP - Cut for Non-Payment. Post cancel algorithm provided by the product - SEV POST CAN does the following (below is the algorithm's description):   This algorithm is called after a severance process has been cancelled (typically because the debt was paid and the SA is no longer eligible to be on the severance process). It checks to see if the process has a completed 'disconnect' event and, if so, starts a reconnect process using the Reconnect Severance Process Template defined in the parameter.    Notice the underlined text. This algorithm implicitly checks for Field Activities having completed status, which were generated from Severance Events as a result of CNP - Cut for Non-payment customer event.   Now if we look back to the customer's issue, we can relate that the Post Cancel algorithm was triggered, but was not able to find any 'Completed' CNP - Cut for Non-payment related field activity. And hence was not able to start a reconnection severance process. This was because a field activity was generated and completed for a customer event CNPW - Cut for Non-payment of Water Services instead.   To conclude, if you introduce new customer events that extend or simulate base customer events, the ones that are included in the base product, ensure that there is no other impact either direct or indirect to other business functions that the application has to offer.  

  Read the article

• Oracle Applications Day 2012. Experience the Global Innovation of Management Applications

  - by antonella.buonagurio

  1024x768 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} 1024x768 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} 10 ottobre 2012 – Milano, East End Studios | 17 ottobre 2012 - Roma, Officine Farneto Partecipa all’appuntamento dedicato alla comunità di Clienti e Partner per fare networking e condividere le esperienze sulle soluzioni più innovative per affrontare le sfide attuali e future. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A Milano (10/10/2012) interverranno, tra gli altri:  Enrico Ancona, Amministratore Delegato - Imperia & Monferrina e Business Reply  Massimiliano Gerli, CIO - Amplifon e Michele Paolin, Senior Manager - Deloitte eXtended Business Services A Roma (17/10/2012) interverranno, tra gli altri: Giulio Carone, CFO - Enel Green Power e Claudio Arcudi, Senior Executive - Accenture Gianluca D’Aniello, CIO - Sky e Giorgio Pitruzzello, Manager - Deloitte Consulting Spartaco Parente, EPD Change & Label Control - Abbott e Business Reply Sono inoltre previsti i contributi delle aziende Abbott, Aeroporto di Napoli, Amplifon, Dema Aerospace, Enel Green Power, Fiera Milano, Imperia & Monferrina, La Rinascente, Safilo, Sky, Spal,Technogym, Tiscali e Tivù che parleranno di: Innovation for Human Resources Performance Management Excellence Empower Applications with Technology (Milano) Applications for Public Sector (Roma) Next Generation Global Operations Customer Experience Revolution Oltre dieci Instant Workshop ti permetteranno di conoscere e condividere l’esperienza dei Partner e delle aziende che utilizzano le soluzioni Oracle.In più, oltre dieci Instant Workshop per conoscere e condividere l’esperienza dei Partner e delle aziende che utilizzano con successo le soluzioni Oracle. Iscriviti sul sito Partecipa al concorso fotografico Oracle I.M.A.G.E. e vinci il tuo iPad! Scatta le immagini che per te descrivono i cinque concept dell’evento (Innovation, Management, Applications, Global, Experience) e inviale per e-mail. Per iscriverti al contest visita la pagina Concorso sul sito Non perdere l’evento più “social cool” dell’anno!

  Read the article

• Philly GiveCamp 2010

  - by wulfers

  Spent the weekend helping out several non-profits doing what we like to do best...  Designing, developing and making people very happy with their new websites, systems, applications and features.  Form what I saw at this GiveCamp about 75 percent of the non-profits needed updated or new websites supporting CMS features and the ability for staff members to update the content on their websites.... Some cool apps were designed and developed..... A centralized system for distribution of daily schedules and task assistance to autistic clients was a show stopper with an awesome central management interface, IPhone and in the future windows phone support for tactile, auditory and visual cues. SharePoint was upgraded and forms were automated for a volunteer fire company that desperately needed some automation to help the fireman do their primary job. Many cool sites for non-profits that had ether an outdated or non existent web presence.

  Read the article

• Limitations of User-Defined Customer Events (FA Type Profile)

  - by Rajesh Sharma

  CC&B automatically creates field activities when a specific Customer Event takes place. This depends on the way you have setup your Field Activity Type Profiles, the templates within, and associated SP Condition(s) on the template. CC&B uses the service point type, its state and referenced customer event to determine which field activity type to generate.   Customer events available in the base product include: Cut for Non-payment (CNP) Disconnect Warning (DIWA) Reconnect for Payment (REPY) Reread (RERD) Stop Service (STOP) Start Service (STRT) Start/Stop (STSP)   Note the Field values/codes defined for each event.   CC&B comes with a flexibility to define new set of customer events. These can be defined in the Look Up - CUST_EVT_FLG. Values from the Look Up are used on the Field Activity Type Profile Template page.     So what's the use of having user-defined Customer Events? And how will the system detect such events in order to create field activity(s)?   Well, system can only detect such events when you reference a user-defined customer event on a Severance Event Type for an event type Create Field Activities.     This way you can create additional field activities of a specific field activity type for user-defined customer events.   One of our customers adopted this feature and created a user-defined customer event CNPW - Cut for Non-payment for Water Services. This event was then linked on a Field Activity Type Profile and referenced on a Severance Event - CUT FOR NON PAY-W. The associated Severance Process was configured to trigger a reconnection process if it was cancelled (done by defining a Post Cancel Algorithm). Whenever this Severance Event was executed, a specific type of Field Activity was generated for disconnection purposes. The Field Activity type was determined by the system from the Field Activity Type Profile referenced for the SP Type, SP's state and the referenced user-defined customer event. All was working well until the time when they realized that in spite of the Severance Process getting cancelled (when a payment was made); the Post Cancel Algorithm was not executed to start a Reconnection Severance Process for the purpose of generating a reconnection field activity and reconnecting the service.   Basically, the Post Cancel algorithm (if specified on a Severance Process Template) is triggered when a Severance Process gets cancelled because a credit transaction has affected/relieved a Service Agreement's debt.   So what exactly was happening? Now we come to actual question as to what are limitations in having user-defined customer event.   System defined/base customer events are hard-coded across the entire system. There is an impact even if you remove any customer event entry from the Look Up. User-defined customer events are not recognized by the system anywhere else except in the severance process, as described above.   There are few programs which have routines to first validate the completion of disconnection field activities, which were raised as a result of customer event CNP - Cut for Non-payment in order to perform other associated actions. One such program is the Post Cancel Algorithm, referenced on a Severance Process Template, generally used to reconnect services which were disconnected from other Severance Event, specifically CNP - Cut for Non-Payment. Post cancel algorithm provided by the product - SEV POST CAN does the following (below is the algorithm's description):   This algorithm is called after a severance process has been cancelled (typically because the debt was paid and the SA is no longer eligible to be on the severance process). It checks to see if the process has a completed 'disconnect' event and, if so, starts a reconnect process using the Reconnect Severance Process Template defined in the parameter.    Notice the underlined text. This algorithm implicitly checks for Field Activities having completed status, which were generated from Severance Events as a result of CNP - Cut for Non-payment customer event.   Now if we look back to the customer's issue, we can relate that the Post Cancel algorithm was triggered, but was not able to find any 'Completed' CNP - Cut for Non-payment related field activity. And hence was not able to start a reconnection severance process. This was because a field activity was generated and completed for a customer event CNPW - Cut for Non-payment of Water Services instead.   To conclude, if you introduce new customer events, you should be aware that you don't extend or simulate base customer events, the ones that are included in the base product, as they are further used to provide/validate additional business functions.  

  Read the article

• What is your strategy for converting RC builds into retail?

  - by Matthew PK

  We're trying to implement a strategy for how we transition our builds from RC to released retail code. When we label a build as a release candidate, we send it to QA for regression. If they approve it, that RC then becomes our released retail code. I liked the idea of "obvious" labeling of versions so that a user knows whether they have a beta or an RC or retail code... where you would have some obvious watermark in non-retail code (think Windows 7 where the RC or non-genuine builds watermark in the bottom right). ... but it seemed strange to us to manipulate the project (to remove the watermark) once it passed regression. If QA certified version a.b.c.d then our retail code should be that same version, not a.b.c.d+1 what strategies have you employed to clearly label non-release software versions without incrementing your build to disable the watermarks in your retail code? One idea I've considered is writing your build to look for a signed file in the installer archive... non-release code wouldn't include this file and so the app would know to display a watermark. But even this seems like QA is then working with non-release code. Ideas?

  Read the article

• Invitation to the Oracle EDGE Applications Partner Roadshow

  - by Hartmut Wiese

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 This is a unique opportunity for any Oracle Alliance & Channel Managers & their Partners to connect with the Oracle Edge Sales and Management Team to understand the relevance and value of the entire Oracle Edge Portfolio of Applications in solving complex customer issues and supporting a variety of evolving Partner Go-To-Market business models. Oracle Edge Applications (PLM, VCE, VCP, MDM, GRC, OPA) With strong participation from the key Oracle Edge Applications Sales business leaders, attendees will get the opportunity to hear about the benefits of the Oracle Edge Solutions within three different value-added contexts: Value 1: Oracle Edge Application Strategy Value 2: Oracle Value Chain Transformation Vision Value 3: Individual Application Business Line Differentiators Following on from the morning presentations, Oracle Partners will also get the opportunity in the afternoon to challenge and discuss the value of Oracle Edge Applications in the context of their own Go-To-Market business models. These sensitive discussions will be managed via focused 1-2-1 breakout meetings with the relevant Oracle Edge Applications Sales Business Leaders. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} When Where To Register Tuesday, July 09th 2013 09 am to 04 pm Utrecht Register now Tuesday, July 16th 2013 09 am to 04 pm London Register now Wednesday, August 28th 2013 09 am to 04 pm Paris Register now IIMPORTANT NOTE: ONLY 60 ATTENDEE PLACES AVAILABLE PER LOCATION - BOOK NOW TO AVOID MISSING OUT. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} There is a strict limit to the number of people who can attend this event based on site logistics for the day. Please note that Partners will be given priority over Oracle personnel registrations. Partners however may only register a maximum of 2 personnel from their company plus the supporting local Oracle Alliance & Channel Manager /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• How can I determine which GPU card is running at PCI Express 2.0 x16 & which is using x8?

  - by M. Tibbits

  Is there a way to determine the speed of the PCI Express connection to a specific card? I have three cards plugged in: two Nvidia GTX 480's (one at x16 & and one at x8) one Nvidia GTX 460 running at x8 Is there some way, either by a function call in C or an option to lspci that I can determine the bus speed of the graphics cards? When I only use one of the cards for my CUDA program, I'd like to use the one which is running at x16. Thanks! Note: lspci -vvv dumps out For the two GTX 480s. I don't see any differences that pertain to bus speed. 03:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at df00 [disabled] [size=128] [virtual] Expansion ROM at b8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 03:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] Capabilities: <access denied> 04:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at cf00 [size=128] [virtual] Expansion ROM at c8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 04:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 5 Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> And the only differences I see relate specifically to the memory mapping: myComputer:~> diff card1 card2 3c3 < Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 7,11c7,11 < Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] < Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] < Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] < Region 5: I/O ports at df00 [disabled] [size=128] < [virtual] Expansion ROM at b8000000 [disabled] [size=512K] --- > Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] > Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] > Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] > Region 5: I/O ports at cf00 [size=128] > [virtual] Expansion ROM at c8000000 [disabled] [size=512K] 18c18 < Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 19a20 > Latency: 0, Cache Line Size: 64 bytes 21c22 < Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] --- > Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K]

  Read the article

• OBIA on Teradata - Part 1 Loader and Monitoring

  - by Mohan Ramanuja

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The out-of-the-box (OOB) OBIA Informatica mappings come with TPump loader.   TPUMP  FASTLOAD TPump does not lock the table. FastLoad applies exclusive lock on the table. The table that TPump is loading can have data. The table that FastLoad is loading needs to be empty. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} TPump is not efficient with lookups. FastLoad is more efficient in the absence of lookups. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The out-of the box Informatica mappings come with TPump loader. There is chance for bottleneck in writer thread The out-of the box tables in Teradata supplied with OBAW features all Dimension and Fact tables using ROW_WID as the key for primary index. Also, all staging tables use integration_id as the key for primary index. This reduces skewing of data across Teradata AMPs.You can use an SQL statement similar to the following to determine if data for a given table is distributed evenly across all AMP vprocs. The SQL statement displays the AMP with the most used through the AMP with the least-used space, investigating data distribution in the Message table in database RST.SELECT vproc,CurrentPermFROM DBC.TableSizeWHERE Databasename = ‘PRJ_CRM_STGC’AND Tablename = ‘w_party_per_d’ORDER BY 2 descIf you suspect distribution problems (skewing) among AMPS, the following is a sample of what you might enter for a three-column PI:SELECT HASHAMP (HASHBUCKET (HASHROW (col_x, col_y, col_z))), count (*)FROM hash15GROUP BY 1ORDER BY 2 desc; ETL Error Monitoring Error Table – These are tables that start with ET. Location and name can be specified in Informatica session as well as the loader connection.Loader Log – Loader log is available in the Informatica server under the session log folder. These give feedback on the loader parameters such as Packing Factor to use. These however need to be monitored in the production environment. The recommendations made in one environment may not be used in another environment.Log Table – These are tables that start with TL. These are sparse on information.Bad File – This is the Informatica file generated in case there is data quality issues

  Read the article

• Not able to apt-get update from terminal, what to do now?

  - by Utkarsh

  Whenever I try to update from terminal, I get this error: root@Utkarsh[utkarsh]#apt-get update Hit http://packages.bosslinux.in anokha Release.gpg Hit http://packages.bosslinux.in anokha Release Hit http://packages.bosslinux.in anokha/contrib Sources Hit http://packages.bosslinux.in anokha/non-free Sources Hit http://packages.bosslinux.in anokha/main Sources Hit http://packages.bosslinux.in anokha/contrib i386 Packages Hit http://packages.bosslinux.in anokha/non-free i386 Packages Hit http://packages.bosslinux.in anokha/main i386 Packages Ign http://packages.bosslinux.in anokha/contrib Translation-en_US Ign http://packages.bosslinux.in anokha/contrib Translation-en Ign http://packages.bosslinux.in anokha/main Translation-en_US Ign http://packages.bosslinux.in anokha/main Translation-en Ign http://packages.bosslinux.in anokha/non-free Translation-en_US Ign http://packages.bosslinux.in anokha/non-free Translation-en Reading package lists... Done W: Duplicate sources.list entry http://packages.bosslinux.in/boss/ anokha/main i386 Packages (/var/lib/apt/lists/packages.bosslinux.in_boss_dists_anokha_main_binary-i386_Packages) W: Duplicate sources.list entry http://packages.bosslinux.in/boss/ anokha/contrib i386 Packages (/var/lib/apt/lists/packages.bosslinux.in_boss_dists_anokha_contrib_binary-i386_Packages) W: Duplicate sources.list entry http://packages.bosslinux.in/boss/ anokha/non-free i386 Packages (/var/lib/apt/lists/packages.bosslinux.in_boss_dists_anokha_non-free_binary-i386_Packages) W: You may want to run apt-get update to correct these problems

  Read the article

• New Java ME security app, Rapid Tracker, is now full version

  - by hinkmond

  Rapid Protect has updated it's Java ME security app to be the full version now instead of a dumbed down version that ran on feature phones. Now, that's progress! See: Full Rapid Tracker on Java ME Here's a quote: Rapid Protect, a leading company focused on mobile based safety, security and collaboration space announces major feature enhancements to its award winning "Rapid Tracker" mobile applications. In addition to many new features, it announced availability of Full Rapid Tracker application on J2ME non-smart feature phones. Hmmm... "on J2ME non-smart feature phones". I wonder if by "non-smart" they mean another word... Perhaps, "non-iDrone-Anphoid"? Hinkmond

  Read the article

• Customer Perspectives: Oracle Data Integrator

  - by Julien Testut

  Normal 0 false false false EN-US X-NONE X-NONE The Data Integration Product Management team will be hosting a customer panel session dedicated to Oracle Data Integrator at Oracle OpenWorld. I will have the pleasure to present this session with three of our customers: Paychex, Ross Stores and Turkcell. In this session, you will hear how Paychex, Ross Stores and Turkcell utilize Oracle Data Integrator to meet their IT and business needs. Our customers will be able to share with you how they use ODI in their environments, best practices, lessons learned and benefits of implementing Oracle Data Integrator. If you're interested in hearing more about how our customers use Oracle Data Integrator then I recommend attending this session: Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Customer Perspectives: Oracle Data Integrator Wednesday October, 3rd, 1:15PM - 2:15PM Marriott Marquis – Golden Gate C3 v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} The Data Integration track at OpenWorld covers variety of topics and speakers. In addition to product management of Oracle GoldenGate, Oracle Data Integrator, and Enteprise Data Quality presenting product updates and roadmap, we have several customer panels and stand-alone sessions featuring select customers such as St. Jude Medical, Raymond James, Aderas, Turkcell, Paychex, Comcast, Ticketmaster, Bank of America and more. You can see an overview of Data Integration sessions here.  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} If you are not able to attend OpenWorld, please check out our latest resources for Data Integration and Oracle GoldenGate. In the coming weeks you will see more blogs about our products’ new capabilities and what to expect at OpenWorld. We hope to see you at OpenWorld and stay in touch via our future blogs. v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• The Next Frontier: Java Embedded @ JavaOne

  - by Kristin Rose

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Now more than ever, the Java platform is the best technology for many embedded use cases. Java’s platform independence, high level of functionality, security, and developer productivity, address the key pain points in building embedded solutions... and that’s not just our opinion. Take a look at the new IDC report on Oracle’s stewardship of Java, “Java: Two and a half Years After the Acquisition” (doc #236309, August 2012). Java already powers around 3 billion devices worldwide, with traditional desktops and servers being only a small portion of that, and the ‘Internet of Things‘ is just really starting to explode. It is estimated that within five years, intelligent and connected embedded devices will outnumber desktops and mobile phones combined, and will generate the majority of the traffic on the Internet. Is your platform and services strategy ready for the coming disruptions and opportunities? It should come as no surprise that Oracle is enthusiastically focused on Java for Embedded .  New this year, Oracle is demonstrating its further commitment to the embedded marketplace by offering, for the first time, a dedicated conference focused on the business aspects of embedded Java: Java Embedded @ JavaOne. Co-located with the technically-focused JavaOne conference, Java Embedded @ JavaOne will run for two days in San Francisco targeting C-level executives, architects, business leaders, and decision makers. With 24 inspired business sessions with expert speakers from 18 prominent companies driving the next generation of Java Embedded business solutions (such as Cinterion, ARM, Hitachi and Rockwell Automation), attendees will learn how Java Embedded technologies and solutions can offer compelling value and a clear path forward to business efficiency and agility. You’ll also see how Oracle’s comprehensive technology portfolio can deliver a complete ‘Machine to Machine’ platform, from device to datacenter, resulting in a highly secure, resilient, high-performance and cost-effective solution. Seating is limited and we expect a lot of interest in this new event, so please register now! Note that if you are already attending the Oracle OpenWorld or JavaOne conferences, you can attend this conference for only $100 more. Watch my video below to find out more. I hope to see you there! Judson Althoff SVP of WWA&C Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >