Search Results

Search found 29422 results on 1177 pages for 'port scanning service'.

Page 90/1177 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• mystery Internet traffic to port 445

  - by Ben Collver

  Recently, I noticed traffic from the office network to TCP port 445 on the Internet [a]. Below are the Linux firewall log entries to Facebook's network [b] and Google's network [c]. I would like to identify the source of this traffic. My first guess is that Facebook and Google might be using multiple TCP ports for SSL load balancing. However, I could not confirm this based on the web proxy logs. What else might it be? [a] http://support.microsoft.com/kb/204279 [b] Sep 4 08:30:03 firewall01 kernel: IN=eth0 OUT=eth2 SRC=10.0.0.131 DST=69.171.237.34 LEN=52 TOS=0x00 PREC=0x00 TTL=127 ID=14287 DF PROTO=TCP SPT=51711 DPT=445 WINDOW=8192 RES=0x00 SYN URGP=0 [c] Aug 28 06:02:41 firewall01 kernel: IN=eth0 OUT=eth2 SRC=10.0.0.115 DST=173.194.33.47 LEN=52 TOS=0x00 PREC=0x00 TTL=127 ID=4558 DF PROTO=TCP SPT=49294 DPT=445 WINDOW=8192 RES=0x00 SYN URGP=0

  Read the article

• FREEBSD creating new port

  - by su55

  Hi, I have a script here that I want to create as a port in freebsd and then make it as package so that I can install on some machines. script is below. !/usr/local/bin/bash if [ ! -f "/suid.old" ] then find / -perm -4000 -o -perm -2000 -ls /suid.old else find / -perm -4000 -o -perm -2000 -ls /suid.new diff suid.old suid.new newchanges fi exit 0 if [ -s "/newchanges" ] then mail -s "changes has occured" [email protected] else mail -s "No changes has occured" [email protected] /newchanges fi How can I accomplish this?

  Read the article

• Port based bandwidth shaping

  - by nixnotwin

  I have an interent connection with the speed of 4000k bits up and down. I want to do port based traffic shaping on a ubuntu machine, which acts as router. eth0 is the WAN interface. This is how I would like to allocate bandwidth: For ports 80 and 445 the bandwidth usage can go upto 90% For ports above 1024 upto 65535 the bandwidth usage can go upto 10% For remaining ports the bandwidth usage can go upto 40% The easiest way for achieving the above is using a router with tomato firmware. I have used it and it is very efficient. I want to try if it can be done on a Ubuntu or any GNU/Linux machine. I have googled extensively about the topic and I feel there isn't much information.

  Read the article

• ipfw to redirect traffic from port 80 and 443 to 8080

  - by user1048138

  -A PREROUTING -s 10.0.10.0/24 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 8080 -A PREROUTING -s 10.0.10.0/24 -p tcp -m tcp --dport 443 -j REDIRECT --to-ports 8080 -A POSTROUTING -s 10.0.10.0/24 -o eth0 -j MASQUERADE The above code is what I have used on linux to forward my ports to 8080, how can I do the same on a mac? I have tried test_machine:~ root# ipfw show 00666 0 0 fwd 127.0.0.1,8080 tcp from any to me dst-port 80 and its not working! any suggestions?

  Read the article

• Iptables based router inside KVM virtual machine

  - by Anton

  I have KVM virtual machine (CentOS 6.2 x64), it has 2 NIC: eth0 - real external IP 1.2.3.4 (simplified example instead of real one) eth1 - local internal IP 172.16.0.1 Now I'm trying to make port mapping 1.2.3.4:80 = 172.16.0.2:80 Current iptables rules: # Generated by iptables-save v1.4.7 on Fri Jun 29 17:53:36 2012 *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE -A PREROUTING -p tcp -m tcp -d 1.2.3.4 --dport 80 -j DNAT --to-destination 172.16.0.2:80 COMMIT # Completed on Fri Jun 29 17:53:36 2012 # Generated by iptables-save v1.4.7 on Fri Jun 29 17:53:36 2012 *mangle :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT # Completed on Fri Jun 29 17:53:36 2012 # Generated by iptables-save v1.4.7 on Fri Jun 29 17:53:36 2012 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] COMMIT # Completed on Fri Jun 29 17:53:36 2012 But there is nothing works, I mean it does not forwards that port. Similar configuration without virtualization seems to be working. What am I missing? Thanks!

  Read the article

• MySQL port 3306 became filtered when configured with Keepalived on Ubuntu server 12.04 lts

  - by Ludwig

  I'm configuring two load balancer (lb01 & lb02) with keepalived for my two mysql server (db01 & db02) with standard port 3306. There is virtual ip address (192.168.205.10) to access it also act as failover, but somehow the web server in the front can't access this mysql server using vip. Here is my config: Keepalived: Only the mysql part that i added here. LB01: virtual_server 192.168.205.10 3306 { delay_loop 6 lb_algo rr lb_kind DR protocol TCP real_server 192.168.205.4 3306 { weight 10 TCP_CHECK { connect_port 3306 connect_timeout 2 } } } LB02: virtual_server 192.168.205.10 3306 { delay_loop 6 lb_algo rr lb_kind DR protocol TCP real_server 192.168.205.6 3306 { weight 10 TCP_CHECK { connect_port 3306 connect_timeout 2 } } } I already comment out the "bind-address=127.0.0.1" part in both server my.cnf. Also, remove all the firewall prog from my ubuntu server (ufw or iptables). Any help? thanks.

  Read the article

• Setting up a Time Capsule with port forwarding

  - by Kaji

  Our old AirPort Extreme station hit EOL, so we decided to upgrade it to a Time Capsule. Along the way, we're trying to also set it up with a separate guest network and port forwarding/NAT, however we're having trouble setting it up so that the time capsule is handling the DHCP leases instead of the router. We've got DSL through Verizon through a Westell modem/router to the Time Capsule. Done the RTFM thing, and we haven't been able to get it to work. Can anyone explain how to get things set up properly for this configuration?

  Read the article

• Setting up a Time Capsule with port forwarding

  - by Kaji

  Our old AirPort Extreme station hit EOL, so we decided to upgrade it to a Time Capsule. Along the way, we're trying to also set it up with a separate guest network and port forwarding/NAT, however we're having trouble setting it up so that the time capsule is handling the DHCP leases instead of the router. We've got DSL through Verizon through a Westell modem/router to the Time Capsule. Done the RTFM thing, and we haven't been able to get it to work. Can anyone explain how to get things set up properly for this configuration?

  Read the article

• Declaring multiple ports for the same VirtualHosts

  - by user65567

  Declare multiple ports for the same VirtualHosts: SSLStrictSNIVHostCheck off # Apache setup which will listen for and accept SSL connections on port 443. Listen 443 # Listen for virtual host requests on all IP addresses NameVirtualHost *:443 <VirtualHost *:443> ServerName domain.localhost DocumentRoot "/Users/<my_user_name>/Sites/domain/public" <Directory "/Users/<my_user_name>/Sites/domain/public"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on ... </VirtualHost> How can I declare a new port ('listen', ServerName, ...) for 'domain.localhost'? If I add the following code, apache works (too much) also for all other subdomain of 'domain.localhost' (subdomain1.domain.localhost, subdomain2.domain.localhost, ...): <VirtualHost *:80> ServerName pjtmain.localhost:80 DocumentRoot "/Users/Toto85/Sites/pjtmain/public" RackEnv development <Directory "/Users/Toto85/Sites/pjtmain/public"> Order allow,deny Allow from all </Directory> </VirtualHost>

  Read the article

• Plesk 10 port 8443 connection timeout

  - by GriffinHeart

  I've installed plesk 10 on centOS and after installing to access the cp you need to go https::8443 I'm not being able to, and would like to find out why i can ssh to the server and i can, from the server telnet, to those ports. from another machine i can ping it but when i try to telnet or go to that address i get connection timeout, happens with port 80 and 8443 from my netstat netstat -nlp | grep 8443 tcp 0 0 :::8443 :::* LISTEN 25205/sw-cp-serverd How do i find out whats causing the problem? I also have a router but firewall is at the minimum and the server configured as DMZ, also tried to redirect 8443 to 8443 of the server.

  Read the article

• Configuring port forwarding on Fortigate 50B

  - by GomoX

  I can't for the life of me get port forwarding to work on my Fortigate 50B. I followed the setup tips described on this other SF thread with no success. The only specific difference I can find is we are using load balancing through 2 different internet uplinks. Is there any caveat specific to this scenario that I might be missing? If you need any specific additional information please ask because I think I have checked everything: Virtual IP mapping on external interface wan1 ACCEPT all from any on wan1 to the corresponding server on internal No seeming offending firewall rules (any specific pitfalls that I might want to check for?)

  Read the article

• Plesk 10 port 8443 connection timeout

  - by GriffinHeart

  I've installed plesk 10 on centOS and after installing to access the cp you need to go https::8443 I'm not being able to, and would like to find out why i can ssh to the server and i can, from the server telnet, to those ports. from another machine i can ping it but when i try to telnet or go to that address i get connection timeout, happens with port 80 and 8443 from my netstat netstat -nlp | grep 8443 tcp 0 0 :::8443 :::* LISTEN 25205/sw-cp-serverd How do i find out whats causing the problem? I also have a router but firewall is at the minimum and the server configured as DMZ, also tried to redirect 8443 to 8443 of the server.

  Read the article

• MRTG: Switch Port Throughput

  - by amazinghorse24

  I currently have MRTG running in a Debian box. It currently polls a Netgear Switch for the speeds of 7 or so ports and then makes the graphs of them. It currently only records the bits/sec. I would like to set up MRTG to record and display the total amount of data that has gone through the port, not just the speed of it. I am somewhat new to MIBS and SNMP and so I need some help. The switch is a Netgear GS748AT and am not quite sure where to find the MIBS for it, or which MIBS I need to accomplish my task. Any and all help is appreciated!

  Read the article

• What ports to open for mail server?

  - by radman

  Hi, I have just finished setting up a Postfix mail server on a linux (ubuntu) platform. I have it sending and receiving email and it is not an open relay. It also supports secure smtp and imap. Now this is a pretty beginner question but should I be leaving port 25 open? (since secure smtp is preferred). if so then why? Also what about port 587? Also should I require any authentication on either of these ports? Please excuse my ignorance in this area :P

  Read the article

• mail refused by port 25

  - by shantanuo

  When I try to send a mail from my Linux (CentOS) server, the exit status is 0, but the mail never reaches it's destination. The /var/log/maillog file has an entry something like this... Mar 18 06:33:01 app11 postfix/qmgr[22454]: F18FD9F6074: to=<[email protected]>, relay=none, delay=0.01, delays=0/0/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to alt4.gmail-smtp-in.l.google.com[74.125.45.27]: Connection refused) Am I blocked by google? I tried to send a mail to some other mail server and got the similar result. Mar 18 06:33:01 app1 postfix/smtp[15460]: connect to acsinet11.xxx.com[111.222.333.444]: Connection refused (port 25) How do I correct this problem?

  Read the article

• Quick change of SSH tunnel port forwarding options for SOCKS proxy

  - by user1335897

  The goal is to have access to internet thru SSH tunneling to SOCKS proxy. Me - ssh-on-my-vps - SOCKS proxy - internet Thing is I want to be able to quickly change the SOCKS proxy in this chain. If I use port forwarding on ssh, I assume I have to re-establish SSH tunnel with new SOCKS proxy address in parameters whenever I want to change proxy. Is that right? If it is, then I probably should always point SSH tunnel to localhost listening proxy server which will send requests to specified SOCKS proxy. So what local proxy I should choose that allows to easily change the destination SOCKS proxy via maybe reading from local file where I would put the SOCKS proxy address or via specifying new SOCKS address in its web-admin page?

  Read the article

• Network with bridge and port forwarding?

  - by rafek

  Hi! Below is my current (and planned) home network configuration. I would like to connect my non-wifi-capable desktop to my home network. The question is: HOW? What device do I need? The primary requiremen is that I need to be able to forward ports to my desktop. How would I achieve this? Is there something like "double port forwarding"? Could anyone please explain this configuration to me? Thank you in advance!

  Read the article

• Filtering serial port io

  - by mr odus

  I am currently working on a project where I communicate with hardware via a com port on its respective pc(win xp or 7) It is a fairly large project and sifting through the log file can be a bit of pain. This is my current setup. I use putty to do the actual serial communication, and write it to a log file. Then using MinGW Msys I filter it using tail -f "puttyLog" | grep -i "search term" Is there a better way to do this? I mean specifically filtering the input in realtime. Not that mine is terrible, but it still involves having to read from a log and sometimes there have been hangups where it will be delayed for a minute or 2. I have used software in the past with a main io window and then internal filter panels, but can no longer remember or find it.

  Read the article

• Limiting and redirect port access with useragent

  - by linuxcore

  I'm trying to write iptables string match rule To block http://domain.com:8888 and https://domain.com:8888 when it matches the supplied string in the rule. And another rule to redirect the ports also from 8888 to 7777 I tried following rules but unfortunately didn't work iptables -A INPUT -p tcp -s 0.0.0.0/0 -m string --string linuxcore --algo bm --sport 8888 -j DROP iptables -t raw -A PREROUTING -m string --algo bm --string linuxcore -p tcp -i eth0 --dport 8888 -j DROP iptables -t nat -A PREROUTING -p tcp --dport 8888 -m string --algo bm --string "linuxcore" -j REDIRECT --to-port 7777 iptables -A INPUT -t nat -p tcp --dport 8888 -m string --algo bm --string "linuxcore" -j DROP I want to do this from iptables not the webserver because the server may not have a webserver and those ports are working on internal proxy or something like ..etc

  Read the article

• how to forward IP request to a specific port

  - by Jeremy Talus

  I have 2 servers the first (SRV01) is running Bind and other web app the second (SRV02) is running 2 server Minecraft (^^) in Bind I have 2 A recording for the 2 server MC s1.domain.tld A SRV02IP s2.domain.tld A SRV02IP the 2 MC serv are running on 2 different port 25565 and 25566 so I want that the request from s1.domain.tld:25565 are going to SRV02IP:25565 and the request from s2.domain.tld:25565 are going to SRV02IP:25566 I think I need do this in the SRV02 iptables. I have looking some topic about iptables but nothing pertinent to me. could you help me ? rgds.

  Read the article

• Windows Server 2008 constantly spamming external IP's on outbound TCP port 445

  - by RSXAdmin

  Hi Server Fault, I have a Windows Server 2008 box running as a Domain Controller. I have noticed in my Cisco ASA firewall logs that this box is continuously sending out (like a thousand requests a second) requests on TCP port 445 to external hosts. I have made an effort to deny this outbound traffic from getting on the internet (using the ASA), however I would like these requests to stop from even occurring at all. I have tried disabling TCP/IP over NetBIOS. I have even turned on Windows Advanced Firewall on the box itself to block outbound 445 but the ASA still detects this particular traffic hitting it. I have other DC's and similar type boxes which are not behaving the same way as this box. Is this normal? Is there a way to stop this spamming? Have I been infected? Thank you universe.

  Read the article

• port forwarding using 3 static ip addresses

  - by Danny

  I am new to configuring routers. We have purchased a RV016 Cisco business router that has multiwan capability. What we are attempting to do is take map services from 3 different servers and assign 3 different static IP addresses and then forward port 80 through the router. A short term solution to building a proxy server. Is this possible? Right now we have a consumer grade Cisco router and assign a static IP and it works, we attempted the same settings on the business router and cannot get to the internet. We set it DHCP and it works fine, however we want to to forward the static ports not use DHCP.

  Read the article

• Proxy the traffic in http and https from my iPhone/iPad to VirtualBox on my Mac

  - by Nicolas BADIA

  I've got a mac running a Debian VirtualBox which forward the traffic from 8080 on the mac to 80 in the box and from 8443 to 443. The domains with the extension .dev are redirected on the mac to 127.0.0.1 with dnsmasq. The traffic on IP 127.0.0.1 is forwarded from 80 to 8080 and from 443 to 8443 using ipfw. So with this settings, my Debian VirtualBox gets all the traffic of my .dev domains in http or https. What I want is to be able to proxy the traffic of my .dev domains in http and https from my iPad to my Debian VirtualBox on the mac. I've try to setup an HTTP proxy on the ipad but I can only do it for one port (and it's not working with the port 443). Any idea on how I could achieve that ?

  Read the article

• Network with bridge and port forwarding?

  - by rafek

  Hi! Below is my current (and planned) home network configuration. I would like to connect my non-wifi-capable desktop to my home network. The question is: HOW? What device do I need? The primary requiremen is that I need to be able to forward ports to my desktop. How would I achieve this? Is there something like "double port forwarding"? Could anyone please explain this configuration to me? Thank you in advance!

  Read the article

• Blocking IP address with port forwarding

  - by Jeff Storey

  I have a website setup behind a router, so the router has the external facing address and it will forward requests to the webserver inside the network. If there are X number of invalid login attempts, that IP address will be blocked from logging in. The problem is that because the site is being accessed through port forwarding, all requests show up as though they are coming from the router address, and thus the router address becomes the blocked IP. I'm not sure if this is a limitation of the router (linksys wrt160n) or if this a more general issue. Is there a way to handle this?

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >