Search Results

Search found 3442 results on 138 pages for 'revenue sharing'.

Page 90/138 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• Windows 7 with two network cards doesn't route traffic

  - by Tomek

  I have simple task to do: I have wni7 with two nics.I want to connect another comp(osx) to win7 through second nic to connect it to internet. I already changed the registry. Win7 interface with 192.168.2.1 has no gateway set (no point to do that) OSX interface with 192.168.2.2 has gateway set to 192.168.2.1 I do not add any routes on win7, every thing seems to be already there network on second nic is detected as "undefined network" (probably effect of no gateway) i can achieve any connectivity to internet from OSX only by enabling network connection sharing on nic with 192.168.2.1, but it enables NAT and I'm interested only in pure routing without nat(it's a setup for some research). firewall is off. It seems to me that win7 refuses to forward packets for some reason. Perhaps "undefined network" and NLA service is to blame, although i couldn't find any info about that. Below ascii schematics of my setup: internet<--router(192.168.1.1)<--(192.168.1.1) WIN7 (192.168.2.1)<--(192.168.2.2)OSX Thanks

  Read the article

• NTFS Folder has no owner, no permissions, can't be deleted

  - by winnt93

  Hi, I have a folder a 2003 member server which can't be deleted. Nothing has any permissions (domain admin and running up a cmd prompt as "nt authority\system" using psexec) - always "access denied". When I do a dir /q, the owner shows as "...". I've tried takeown.exe on the folder and also it's parent. The bad folder always reports "access denied". Also tried to reset using icacls, same thing. Explorer permissons has no sharing & security options or tabs. It works fine for other folders, even in the same directory. Bit stumped to say the least. g.

  Read the article

• Generating and collaborating on network map diagrams?

  - by Ian C.

  I have to turn out some network topology maps for very large networks. I'd like the format for the maps to be something other people can also edit and contribute to regardless of what software I'm using on my Mac to build them. I don't mind spending money on my end for software, but I can't require that my clients spend any money. I also can't promise my clients are also using OS X -- they could be running Linux or Windows. Is there a best software application on OS X for producing maps that I can share with other, non-OS X, users? Is there a best format for sharing topology maps that I should use when exporting the maps to disk?

  Read the article

• Will Windows 7 Home Premium access company domain?

  - by neurino

  I'm going to buy 3 lowest-cost possible pcs for new trainee starting in our company. I found some HP notebooks with Windows 7 Home Premium installed. Will users be able to access to company Windows domain (i.e. to log as MY_COMPANY\username)? Or do I need Windows 7 Pro? Which functionalities are missing in Home version? Remote Desktop? edit: about sharing folders I can, with my linux machine along with my domain user and password, join the samba shared folders and printers and this could be enough for our needs. Everithing Users need is: shared domain folders shared domain printers remote desktop to access server remotely

  Read the article

• MAMP and WordPress - Theme is gone

  - by ninjaboi21

  Hey SuperUsers, I hope this is the right section to post this kind of question. If it's not, I am sorry. But to my question: I created a working WordPress blog, running locally with MAMP Pro. I wanted to share my site, and thought I would go public with it, but self hosted. I signed up at DynDNS for my domain and got it working. People can connect, myself included of course. But here goes my problem: Everytime I try to access my website (**.dyndns.info:8888), I am able to access it, but the theme and pictures are gone, so it's only pure text with some links. I can provide a picture of the website if you want it? But what is it I am doing wrong? I tried to enable Web Sharing, but that didn't make a difference. Thank you so much if you can figure this out!

  Read the article

• TCP/IP communication between Hyper-V host and guests

  - by Tedd Hansen

  This may be a simple one. :) I have a simple Hyper-V setup with a few guest os running. The host has 1 physical network adapter with a static IP assigned to it. The guests have network adapters assigned to "Internet" (Hyper-V network) which is bound to the physical host network adapter (Hyper-V "External" connection type). I am not able to communicate (ping or anything else) between guests and host. I've checked firewall and it seems fine (ports open from anywhere still don't work). I'm trying to communicate with the hosts IP assigned to the same physical interface that the guests are sharing. Guests can communicate between them just fine. I can't seem to find any relevant setting (I might just be missing it). So my questions: How do I fix it so host and guests can communicate?

  Read the article

• Command output as string

  - by rik

  I want to get output from command C:\Program Files (x86)\Java\jre7\bin\java.exe" -version as string variable. I tried this way: $out = &"C:\Program Files (x86)\Java\jre7\bin\java.exe" -version but it gives error message: java.exe : java version "1.7.0_05" At line:1 char:9 + $out = & <<<< "C:\Program Files (x86)\Java\jre7\bin\java.exe" -version + CategoryInfo : NotSpecified: (java version "1.7.0_05":String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError Java(TM) SE Runtime Environment (build 1.7.0_05-b05) Java HotSpot(TM) Client VM (build 23.1-b03, mixed mode, sharing) $out variable seems empty. What am I doing wrong?

  Read the article

• Asus RT-N66U forgets USB-Printer

  - by heysamhey

  about a week ago I bought the new Asus RT-N66U as the new Router in our little company. There are about 5 clients and 2 printers. There's a USB-only printer as well, therefor we bougth a router with USB-printer sharing. The setup and everything works smooth, but then after one day, and I still haven't found out why, suddenly the printer dosen't show up in the list of connected devices in the routers webinterface anymore. Of course I loose the possibility of printig, even though the printer shows up as "online" in the system settings. Can anybody guess the reason for this problem? Thank you very much

  Read the article

• Mac OSX DHCP Stopped Working [on hold]

  - by Jesse James Richard

  Tethering a Raspberry PI to a MacBook (Mavericks) via ethernet is proving to be a real pain. This worked for about a day. My MacBook required a rare reboot and once it came back up the Pi won't get an address. I've confirmed it's not a problem with the Pi. It's a problem with the MacBook for sure. It's basically just stopped giving out IPs. I've read as much as I've found about how to fix this friggin' problem, but I've thus far come up blank. Internet sharing Wi-fi Ethernet enabled, and/or Edited /etc/bootpd.plist as described here (http://www.jacquesf.com/2011/04/mac-os-x-dhcp-server/ - this worked initially and now no longer does) Pi connected directly to the router has no problems. My MacBook DHCP server will no longer give out addresses. Any help would be much appreciated.

  Read the article

• Little server for a little network: Asus TS Mini + Windows Home Server or other?

  - by microspino

  Hello, I'm building a little network with 4 computer a plotter, 3 printers an a HP Fax/Scan/Copy/Print machine. The network is connected to the web by a D-Link router/firewall. I would like to add little server to have file sharing (reachable via VPN from outside by a single user-road-warrior), automatic backups. I would like to avoid big electrics bills or, to say It in a green way, I would like to avoid useless power consumption made by a big server with hot-plug, Raid, double PSU because I don't need all this stuff. The server must work 24/7 and the budget is between 400€ and 1000€. I'm evaluating the Asus EEE Box (with XP), a TranquilPC (with XP), a FitPC (again with XP), and an Asus TS Mini (with Windows Home Server). I like the latter but since I'm Europe I don't know where I can buy It. Do you have any suggestion/experience to share with me about: which hardware do I have to buy ? which O.S. ?

  Read the article

• What is the "real" difference between a NAS and NFS?

  - by warren

  From an end-user perspective, what is the difference between a NAS device and using NFS exports from a file server? They seem to accomplish the same end result. The difference between a SAN and other file storage is related (in my experience) to how they are connected to the server infrastructure. However, the difference between a NAS, connecting over standard ethernet, and NFS (sharing storage off specific servers, also over the network), seems more nebulous. Is there a good reason to pick a NAS filer over NFS on servers?

  Read the article

• OS X: How to create a user account with access to the applications that she has installed only.

  - by pmurillo

  Till now, I've been the sole and proud owner of an iMac. I've always logged in as an administrator and I've also installed a bunch of software following the standard procedure of dragging and dropping it into the Applications folder. This is about to change, as sharing it with a friend makes a lot of sense now that I only have time to use the computer in the mornings, and she can only use it at nights. I thought this was going to be really easy: Just create a user account for her and that's all, I thought. Unfortunately, this is not the case. When she logins into the computer using her username and password, she has access to the same applications I've installed. Even the same applications that I setup to automatically start when I login start for her when she does. How can I setup a user that has only access to the applications that she has installed, but none of the ones installed by other users? Many thanks

  Read the article

• Accessing localhost:8080 through local network

  - by Theron Luhn

  I'm developing a Python WSGI website. I'm running a Paste development server on my Mac (OS X 10.7) on port 8080. I want to test the website on some other devices and OSs I have connected to the local network (Windows 7 VM, iPad, iPhone, etc.), but am having trouble. I turned on Web Sharing, and am able to access that (port 80) without a problem on all my devices. Port 8080 still doesn't work. An excerpt from my Paste configuration: [server:main] use = egg:waitress#main host = 127.0.0.1 port = 8080 The OS X firewall (Settings - Security - Firewall) is off. I have no other firewall software installed. My network is through a Linksys WRT160N router. I haven't done much with the settings, so most of them are at their defaults. I've been Googling all morning, but can't find a solution.

  Read the article

• Dns works, can ping, but cannot load web pages in browser

  - by user1224595

  Yesterday I changed routers, and my desktop computer started acting up. I could ping websites, and nslookup was able to resolve names to addresses, but neither chrome, firefox, nor ie could load any webpages. None of my other computers connected to the same wireless router have any problems. I connect my desktop to the router through a cheap wifi dongle. I did a wireshark capture of the browser request, and I have uploaded the pcap here. https://drive.google.com/file/d/0B7AsPdhWc-SwbTV0bUJLQXo4UUE/edit?usp=sharing One strange thing I noticed was the spamming of ssdp packets. I am not super familiar with networking, but it seems that it is not a problem with the router, as dns works, and so does dhcp (the desktop is assigned an address correctly). Any help would be appreciated.

  Read the article

• Can't see a Windows XP computer on the network

  - by user56614

  I have two PC's connected to the same router. One is running Vista Home Premium and the other is running XP Pro. I'm trying to reach the shares of second PC from the first PC. I've enabled file sharing on the XP PC, I've disabled firewall and defender, and I can successfully ping it from the Vista PC. Both computers are set to the same workgroup "WORKGROUP". However, if I try to type "\\192.168.1.2" in Windows Explorer (192.168.1.2 being the IP address of the XP PC), I get a message: "Windows can't access \\192.168.1.2... Error code: 0x80004005 Unspecified error". And If I type "net view \\192.168.1.2" in command prompt, I get "System error 53 has occurred. The network path was not found." Am I missing something trivial?

  Read the article

• 'hijacking' gui and mapping certain controls to certain functions. VNC. TouchOSC

  - by Nick

  I need a VNC LIKE application which rather than sharing the screen, can take control of a specific application and then share that functionality across a network to multiple clients. Obviously, VNC requires use of the mouse and therefore only one user can do something at one time, this is NOT what I am after. I am after something that can hijack the graphic user interface, map certain controls, and then display them in another piece of software (perhaps like TOUCHOSC) The software I would like to map and share is called YAMAHA STUDIO MANAGER and is used to control certain Yamaha audio hardware, and in my case a Yamaha LS9 and M7CL mixing console. Its free.

  Read the article

• How can I enable true anonymous/everyone access to a Window share?

  - by Matthew Read

  I recently discovered that turning off "password protected sharing" in Windows 7 requires having the guest account enabled, named as such, and with a blank password. While Windows seems to automatically attempt to use guest when connecting, Ubuntu does not, requiring anyone trying to access my share to know to use guest and a blank password. I really don't want to have the guest account enabled, either. So is there a way to allow true anonymous access to a Windows share that doesn't require credentials? Or a way to allow any credentials at all?

  Read the article

• Any recommendations on a NAS for a home-super-user?

  - by marc_s

  Can anyone recommend a good NAS for use in a home-server environment? I would request at least 2, preferably 4 disks, and I am most interested in good to excellent throughput for file-server and backup purposes - don't need any of the fancy media-streaming or -sharing features, that's not of interest to me. For a 4 or more disk solution, support for the various RAID levels (0, 1, 1+0, 5) would be a plus - especially if supported in hardware (rather than just a software emulation). I just need a place to put my collection of data, ISO images, and so forth - and since several external disks (self-built and off-the-shelf) have failed so far, I'm looking into a more reliable solution. Marc

  Read the article

• Unable to delete files in Temporary Internet Files folder

  - by Johnny

  I'm on Win7. I have a large number of of large .bin files, totaling 183GB, in my Temporary Internet Files folder. They all seem to come from video sharing sites like youtube. The files are invisible in Explorer even after allowing viewing of hidden files. The only way I can see them is by issuing "dir /fs" on the command line. Now when I try to delete them from the command line nothing happens. Trying to delete the whole folder from Explorer results in access denied because another process is using a file in the folder (IE is not running while I'm doing this). Trying to clear the folder using IE is also unsuccessful. How do I delete these files? How did they end up being there without being deleted by IE?

  Read the article

• How can I password-protect a Mac shared folder on a Windows workgroup?

  - by Phillip Oldham

  We have a Mac-mini running 10.5.8 which already acts as a fileserver for our simple Windows (mixed XP/Vista) workgroup. The Mac-mini is on the same workgroup and the files are shared via SMB, FTP, and AFP. Basic file-sharing is working, and has been for some time. We'd now like to add an additional directory/share which can be secured by a password so that only a small number on the network have access. Is this possible? I've already tried creating the additional folder on the mac system, adding it to the shared folders, and limiting it to a specific "shared user", however it's not possible to log-in from an XP machine. Adding a sub-directory to the currently working share and giving limiting it's access to the shared user doesn't work either.

  Read the article

• Is Samba "remote browse sync" possible across OpenVPN tunnel?

  - by John Reynolds

  I'm connecting 2 TomatoUSB (Shibby build on WNR3500L v2) routers with an OpenVPN routed connection: ----------------------- ----------------------- | Router 1, subnet 20 | <--tunnel--> | Router 2, subnet 21 | ----------------------- ----------------------- Router 1 is the OpenVPN server and Router 2 is a client. Clients attached to the routers on both subnets can ping clients on the other subnet, so the tunnel and routing works. I've enabled file sharing on both, in order to get their Samba WINS servers running. Is it possible to get name resolution across the tunnel? I've tried remote browse sync = 192.168.21.1 in /etc/smb.conf on the server side, to no avail. Also tried using the IP adress that the client gets from the OpenVPN address pool (usually 10.8.0.something), but still no joy.

  Read the article

• How can I restrict my mates to stop downloading?

  - by user239295

  We are sharing an internet broadband connection with 6 users at a place we live. We get 20 gb fup ( Fair usage policy) with 2 mbps speed from the ISP after the 20 gb is consumed the speed comes down to 512 kbps very difficult to browse any page. The problem is we cannot track which user/mate is downloading and ending the FUP. it is very difficult to track so is there something that we can allot per user some amount of space like 2 gb of downloading or restrict all from downloading so that we can utilize all the fup till the end of the month. We are using this connection as wifi configured. A adsl router is configured as wifi and we all using all 6 laptops. No PC. Any help would be appreciated. I apologize if i am not clear with my question.

  Read the article

• RV042 - how to broadcast UDP through VPN

  - by user47221

  I setup a gateway to gateway vpn connection with linksys RV042 router. i was able to ping each other, access file sharing ( with netbios enabled ). They are having same subnet mask 255.255.255.0, 192.168.1.0 <--- 192.168.2.0 Firewall disabled. But when i created/host LAN games (eg. warcraft3), it cannot be detect by clients at another site/LAN. As i know warcraft3 is using UDP broadcast to tell the client the game is creaetd. 1. How to broadcast UDP to another LAN ? any things to do with multicast ?

  Read the article

• How can I password-protect a Mac shared folder on a Windows workgroup?

  - by Phillip Oldham

  We have a Mac-mini running 10.5.8 which already acts as a fileserver for our simple Windows (mixed XP/Vista) workgroup. The Mac-mini is on the same workgroup and the files are shared via SMB, FTP, and AFP. Basic file-sharing is working, and has been for some time. We'd now like to add an additional directory/share which can be secured by a password so that only a small number on the network have access. Is this possible? I've already tried creating the additional folder on the mac system, adding it to the shared folders, and limiting it to a specific "shared user", however it's not possible to log-in from an XP machine. Adding a sub-directory to the currently working share and giving limiting it's access to the shared user doesn't work either.

  Read the article

• Use Google Apps/Cloud Services as a Domain Controller Replacement

  - by user124548

  This is a Canonical Question about Cloud Services replacing Active Directory. Is it possible to use Google Apps or another Cloud Service as a replacement for a Windows Domain Controller (replacing my whole AD infrastructure)? Specifically, I want to remove our dependence on a local Windows Server; currently it acts as a Domain Controller with File and Print Services. I'd like to seamlessly replace this server with something based on hosted applications. I do not just want to move the server to a dedicated or collocated server. I have yet to figure out how to piece together printer/etc sharing. If anyone has any insight into this, it would be appreciated. The goal is to eventually move all my servers to the cloud then write up a case study on the whole affair.

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >