Search Results

Search found 2697 results on 108 pages for 'tan kah ping'.

Page 90/108 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

  • arp requests are sent continuously and my linux machine disconnected to the world

    - by sees
    I have the following problem and really need your help I'm implementing a small server to receive request from client on port 18999(just sample) using TCP socket. When I tested my server by using a lot of requests from a tablet through a router, I got the ARP problem(?) My net work just like: TABLET <------- WIRELESS ROUTER <------- MY SERVER (LINUX) Problems: 1. Can not connect to my Linux any more ( telnet, ping v.v...unreachable) 2. I use serial cable to connect to my Linux machine and use Wiresharp (from Windows) to catch the send message from Linux. It says that Linux keeps sending out continuously every 3 seconds ARP messages like the following: xx:xx:99:77:ff:69 ff:ff:ff:ff:ff:ff ARP 60 Who has 192.168.10.2? Tell 192.168.10.3 In the above message: xx:xx:99:77:ff:69 my Linux MAC address 192.168.10.2 my Tablet address 192.168.10.3 my Linux IP address Can you help me figure out the problem? Or tell me the way to detect the problem and reset the network back to normal (maybe restart Linux but I want to detect problem and restart automatically) UPDATE: 1. The above network works normally if tablet sends messages to my LINUX in normal speed (but also down after 48 hours) 2. The router works again after I unplugged my Linux ethernet cable (RJ45) from router. 3. The wireless network still works ( I can browser the router page from tablet) 4. When I use: ifconfig down then ifconfig up , the Linux restarts (?????????)

    Read the article

  • Adding a Second Wireless Router to an Existing Wired Network

    - by KVCrawford
    I apologize ahead of time, I know this has been asked before, but I'm still having problems...maybe you guys can help. I started out with the basic instructions from the highest-voted answer at http://serverfault.com/questions/41572/adding-a-second-wireless-router-to-my-network The new Wireless router in question is a Linksys Wireless-N Gigabit Router, Model # WRT310N Here are the steps I've taken in setting it up: Plug my laptop into LAN port #2 in the new router. Nothing else is connected at this point Configure the new router to be 192.168.1.200 (the original router is 192.168.1.1, and its DHCP clients are from 192.168.1.100-x.x.x.199) Set the internet connection on the new router to "DHCP Client" Turn off the DHCP server & NAT routing on the new router Plug in a LAN cable from the original router into the LAN port #1 on the new router (NOT the WAN port, nothing is plugged in there) Reset the new router Afterwards, I try to ping 192.168.1.1 from the laptop plugged into LAN port #2 on the new router, with no response. 192.168.1.200 garners no response either. Typing "ipconfig" tells me: Autoconfiguration IP Address: 169.254.198.113 Subnet Mask: 255.255.0.0 Default Gateway: 169.254.198.113 What's going wrong? I appreciate any help!

    Read the article

  • Cisco router not receiving OSPF updates

    - by WebDevHobo
    Or at least, that's what I think is happening. There doesn't appear to be a debug command for this, or to see if something is in the routing table. I'm testing out this setup in Packet Tracer. I have 3 routers and a webserver From left to right, you have: Webserver - Router1 - Router2 - Router3 Router1 and Router2 can succesfully ping WebServer. Router3 cannot. Router2 has a default gateway set, to send all not-recognized data through its serial interface to Router1. Like this: ip route 0.0.0.0 0.0.0.0 Serial 0/0/1 Serial 0/0/1 being the connection to Router1 Router2 and Router3 have OSPF configured. From their "show run": Router2: router ospf 1 log-adjacency-changes passive-interface Serial0/0/1 network 10.1.1.0 0.0.0.3 area 0 default-information originate ! Router3: router ospf 1 log-adjacency-changes network 10.1.1.0 0.0.0.3 area 0 passive-interface FastEthernet0/0 ! I was under the assumption that setting default-information originate on Router2 would give Router3 the needed information. What's going wrong here? The interfaces are up. Ip addresses are with mask-range, clock rate is set at correct end. I don't know what else to check.

    Read the article

  • RRAS Public Address Pool on Windows Server 2008

    - by Art
    I have a Windows 2008 server with two NICs running RRAS and a small public website. It also does NAT for several other PCs on my network and everything works great. I have a block of 5 public static IPs from my ISP, one of which is bound to the public NIC in the Windows 2008 server. I would like to assign one of the remainging 4 public IPs to a machine on my private network. I thought I could do this by going into RRAS, selecting NAT under IPv4 and then adding the public IP address to the address pool and specifying a reservation for the machine I would like to use that address by adding its private ip address. When I do this, the machine I reserved the public IP address for seems to loose all outside network connectivity. I can still ping other PCs on my 192.168.0.* net, but anything outside is no longer reachable. When I remove the reservation, everything seems to work. After setting the reservation and right clicking on the external public interface and selecting 'Show Mappings' I can see outbound requests from my private address with the desired associated private address, however I do not see any inbound requests. What am I doing wrong/missing?

    Read the article

  • Ubuntu Server mdadm drbd ocfs2 kvm hangs under heavy file reading

    - by Stefano Annese
    I have deployed four ubuntu 10.04 server. They are coupled two by two in a cluster scenario. on both sides we have software raid1 disks, drbd8 and OCFS2 and on top of it some kvm machines run with qcow2 disks. I followed this: Link corosync is just used for DRBD and OCFS, the kvm machines are run "manually" When it works is fine: good performances, good I/O, but at a given time one of the two cluster started hanging. Then we tried with just one server turned on and it hangs the same. It seems to happen when an heavy READ in one of the virtual machines occurs, that is during rsyn backup. When the fact occurs the virtual machines are not reachable any more and the real server responds with good delay to the ping but no screen and no ssh is available. All we can do is force shutdown (hold the button) and restart and when it turns on again the raid on which relay drbd is resyncing. All the time it hangs we see such fact. After a couple of week of pain on one side this morning also the other cluster hung, but it has different moteherboard, ram, kvm instances. What is similar is reading for rsync scenario and Western Digital RAID Edistion disks on both side. Can anybody give me some input to solve such issue?

    Read the article

  • Excel 2007: Named ranges problems when linking workbooks

    - by Mike
    I've 30+ workbooks each with 5 specific worksheets (formated the same). Each worksheet's data needs to be linked to a master workbook, so that I end up with 5 master workbooks and all the specific data in one long table format $A$2:$I$750. (Are you still with me? ;)) I don't have access to a database, so I'm having to link the sheets to their master workbook directly. I've highlighted the data I need; named the range; and then tried referencing this from my master workbook. I get the #Value error symbol when I try to link (=[WorkbookName]!MyNamedRange) to a cell that doesn't match the top left cell of my range. Example: MyNamedrange is always =$A$2:$I43$ on one specific sheet. On my master workbook it works if it's referenced at A2 but I get #Value if it's referenced A1, or A44. Any ideas? I'm trying to link my data in one continous table so I can run a pivot on it, and other things. Can it be done like this, or should I just copy and paste? I'm trying to keep things 'linked'so I do not need to spend time C&Ping all day. Many thanks Mike.

    Read the article

  • ASA Slow IPSec Performance with Inconsistent Window Size

    - by Brent
    I have a IPSec link between two sites over ASA 5520s running 8.4(3) and I am getting extremely poor performance when traffic passes over the IPSec VPN. CPU on the devices is ~13%, Memory at 408 MB, and active VPN sessions 2. The load on both of the the devices is particularly low. Latency between the two sites is ~40ms. Screenshot of wireshark file transfer between the two hosts over the firewall IPSec VPN performing at 10MBPS. Note the changing window size. http://imgur.com/wGTB8Cr Screenshot of wireshark file transfer between the two hosts over the firewall not going over IPSec performing at 55MBPS. Constant window size. http://imgur.com/EU23W1e I'm showing an inconsistent window size when transferring over the IPSec VPN ranging in 46,796 to 65535. When performing at 55+MBPS, the window size is consistently 65,535. Does this show a problem in my configuration of the IPSec VPN in the ASA or a Layer1/2 issue? Using ping xxxxxx -f -l I finally get a non-fragment at 1418 bytes so 1418+28 for IP/ICMP headers = 1446. I know that I have 1500 set on the ASA and Ethernet. I do have "Force Maximum segment size for TCP proxy connection to be" "1380" bytes set under Configuration Advanced TCP Options on the ASA. Using IPERF, I am getting a "TCP Window Full" every few seconds and ~3 MBPS performance. http://imgur.com/elRlMpY Show Run on the ASA http://pastebin.com/uKM4Jh76 Show cry accelerator stats http://pastebin.com/xQahnqK3

    Read the article

  • Sonicwall TZ210 - Set up public wifi on separate subnet & interface

    - by thomasjbarrett
    I want to set up a public wifi by connecting another router to the X6 interface, and put it on a separate subnet (192.168.10.0/24) & in the DMZ Zone to keep it away from the regular LAN. I believe I have the network settings correct: the router has acquired the IP and DNS information from the TZ210, and the TZ210 shows it as an active DHCP lease. X6 is in the DMZ. I now have a routing/NAT/firewall problem, since I can't get any traffic to travel from the subnet to the internet. I can't get to any external websites and can't ping the TZ210 from the subnet. X0 is the regular LAN, and X1 is the WAN. Looking for any tips or tutorials on this. Here's my current relevant rules: Routing Source: X6 Subnet Destination: Any Service: Any Gateway: Default Gateway Interface: X6 Source: Any Destination: X6 Subnet Service: Any Gateway: 0.0.0.0 Interface: X6 NAT Policies Source Original: Any Translated: WAN IP Destination Original: Any Translated: Original Inbound: X6 Outbound: X1 Source Original: Any Translated: U0 IP Destination Original: Any Translated: Original Inbound: X6 Outbound: U0 Firewall DMZ LAN : Deny All DMZ WAN : Allow All LAN DMZ : Allow All WAN DMZ : Allow All

    Read the article

  • Windows Server 2008 R2 RAS VPN: access server on internal interface ip

    - by Mathias
    Hey, short question: I'm usually a linux admin but need to setup a Win2k8 R2 server for a student project. The server is running as VM on a root server and has a public internet IP assigned. Additionally I need a VPN server to access some services running on the server. I managed to set up a working VPN gateway via the Routing and RAS service which assigns clients an IP in the private subnet 192.168.88.0/24 with the Interface "Internal" listening on 192.168.88.1. Additionally I set up the external interface as NAT interface. So I can connect to the VPN server, get an IP assigned and the server additionally does NAT and I can access the internet over the VPN connection. The only thing I additionally need, is that I can access the server itself over that internal IP (e.g. client 192.168.88.2, server 192.168.88.1) as I want to access some services which I don't like to expose to the internet and restrict them to connected VPN clients. Does anybody have a hint, which configuration I'm missing here to be able to access the server over the VPN connection? EDIT: VPN clients get assigned the IP from the private subnet with subnetmask 255.255.255.255, I guess that might be the reason I can't access the server on the private IP address although it's in the same network range. Any ideas how to change this? I defined a static address pool in the Routing and RAS service, but I can't change the netmask there. EDIT2: I can't access the server from the client, but I can fully access the client from the server (ping, HTTP). I guess it has to do with firewall configuration. Thanks in advance, Mathias

    Read the article

  • Devices on one switch can't see devices on another switch

    - by jockey69
    I have RoadRunner Internet cable service hooked to a Motorola Surfboard modem. This is connected to a 10/100 wireless router (located in the garage). Downstairs, I have a ZyXEL GS-108b gigabit switch connected to one port on the router. From this switch I ran connections to a PS3, DVR, Vonage box and a wireless router (Buffalo AirStation 10/100). The Buffalo AirStation works as a wireless AP for other laptops, iPads and cell phones. Upstairs, I have an Asus gigabit switch connected to a gaming desktop, printer, and a media server on FreeNAS (PS3 Media Server on FreeNAS). The router is configured to assign static IPs to both the PS3 and the media server. Problem - I connect a laptop to the switch downstairs after disabling the wireless, thus making sure that I am accessing internet through the wired connection (and the router in the garage). All my computers, iPads and cell phones are able to connect to the internet without a problem. My PS3 connects to the interent with a wired connection but is unable to access the media server (I get a message that no media server is found). I used a wired laptop downstairs (connected to switch downstairs) but am unable to ping either the PS3 or media server! I may be doing something silly but am at my wits' end. Please help!

    Read the article

  • Cannot access domain from windows 2003 client

    - by Peuge
    Hey all, First off I am a novice at AD and DNS so please bear with me. This is my current situation: I have one server which is a DC and DNS server (win2k3) - Machine 1. I have another machine which is trying to join this domain - Machine2. This machine is also a win2k3 server. This is what I have done so far: I have setup DNS on the DC and its tcp/ip dns is pointing to itself. On machine2 I have set its dns to point to the dc. The DNS has been setup with a forward lookup zone with the same name as the domain (accdirect.com). I can ping machine1 from the machine2 by its FQDN and ip. I have set up forwarders on the DC for our ISP dns and can browse the internet on both machines. In the DNS mmc on the DC I can see a host (A) has been created for machine2. The problem is I still cannot join the domain. When I try join the domain via my computer - properties then it brings up the username/password box and after I go "ok" it says cannot find domain accdirect.com If I run this from machine2 dcdiag /s:accdirect.com /u:accdirect.com\admin /p: then I get the following: Performing initial setup: ** Warning: could not confirm the identity of this server in the directory versus the names returned by DNS servers. If there are problems accessing this directory server then you may need to check that this server is correctly registered with DNS [accdirect.com] Directory Binding Error 1722: Win32 Error 1722 This may limit some of the tests that can be performed. Done gathering initial info. On the dc all dcdiag and netdiag results pass. If anyone could help me I would really appreciate this! Sorry if any of my terminology is a bit off, I have only been doing this for two days. thanks Peuge

    Read the article

  • Iptables Forwarding problem

    - by ankit
    Hi all, I had initally asked question about sertting up my linux box for natting for my home network and was given suggestions in the thread here. Did not want to clutter the old question so starting a new one here. based on the earlier suggestions, i have come up with the following rules ... :PREROUTING ACCEPT [1:48] :OUTPUT ACCEPT [12:860] :POSTROUTING ACCEPT [3:228] -A POSTROUTING -o eth0 -j MASQUERADE COMMIT *filter :INPUT DROP [3:228] :FORWARD DROP [0:0] :OUTPUT DROP [0:0] -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p icmp -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 22 -j ACCEPT -A FORWARD -i eth1 -p icmp -j ACCEPT -A FORWARD -i eth1 -p tcp -m tcp --dport 80 -j ACCEPT -A FORWARD -i eth1 -p tcp -m tcp --dport 443 -j ACCEPT -A OUTPUT -p icmp -j ACCEPT -A OUTPUT -j ACCEPT COMMIT If you notice, i do have the proper MASQURADING rule and the proper FORWARD filter rule as well. However i am facing 2 problems On the linux box itself DNS resolving is not working the lan clients connected to the linux box, are still not able to get to internet. when i ping something from them, i see the DROP count in iptables INPUT rule increasing. now my question is, when i am pinging something from the lan client, how come it is being matched by the input chain ?! should it be in the forward chain ? Chain INPUT (policy DROP 20 packets, 2314 bytes) pkts bytes target prot opt in out source destination 99 9891 ACCEPT all -- lo any anywhere anywhere 0 0 ACCEPT icmp -- eth0 any anywhere anywhere 0 0 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:http 0 0 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:https 122 9092 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:ssh Thanks ankit

    Read the article

  • Hyper-V Virtual Machine won't respond over network

    - by Brad Gignac
    Recently, one of our Hyper-V virtual machines has periodically stopped responding over the network. It seems to be happening every few days, and it occasionally happens up to several times a day. I am by no means a sysadmin, so any direction you guys could provide would be very welcome. I've included everything I know to include below. If you need any additional information, I'll be glad to include it. I can connect through the Hyper-V console. I can't connect to network shares, IIS web apps, using RDP, or using ping. Memory usage seems to be normal (3 of 4 GB) Processor usage seems low. We don't know the exact time the server goes down, but the following error appears consistently around the time it goes down: Error 5719, NETLOGON This computer was not able to set up as secure session with a domain controller in domain *** due to the following: There are currently no logon servers available to service the logon request. This may lead to authentication problems. Make sure that this computer is connected to the network. If this problem persists, please contact your domain administrator.

    Read the article

  • How to fix massive lag on ZyXEL HomePlug AV powerline adapters?

    - by Tim Abell
    I have 3 ZyXEL Homeplug AV powerline adapters as per the one in the review below. I have two plugged in currently, one into my Be / Thompson wireless router, and one into my desktop pc (box1). every now and then the link indicator on the adapters (the mains link, not the ethernet link) goes nutty, and performance falls off a cliff (see below). http://www.gadgetspeak.com/gadget/article.rhtm/753/479266/ZyXEL_PowerLine_HomePlug_AV_PLA401.html 64 bytes from box1 (192.168.1.101): icmp_seq=1064 ttl=64 time=996 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1065 ttl=64 time=549 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1066 ttl=64 time=6.15 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1067 ttl=64 time=1400 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1068 ttl=64 time=812 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1069 ttl=64 time=11.1 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1070 ttl=64 time=1185 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1071 ttl=64 time=501 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1072 ttl=64 time=1975 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1073 ttl=64 time=970 ms ^C --- box1 ping statistics --- 1074 packets transmitted, 394 received, +487 errors, 63% packet loss, time 1082497ms rtt min/avg/max/mdev = 5.945/598.452/3526.454/639.768 ms, pipe 4 Any idea how to diagnose/fix? I'm on linux so installing the windoze software that came with them is not something I'm terribly keen to do.

    Read the article

  • Unable to connect to cable modem when connected to VPN

    - by Spuas
    the scenario is as follows: First I have a cable modem which gives the internet connection. The network is 192.168.0.0/24 and its IP is 192.168.0.1 Second line, I have a router connected to the cable modem. Its "outside" IP is 192.168.0.12. This router creates network 192.168.123.0/24 and its IP there is 192.168.123.254. My computer is wired to the router with IP 192.168.123.126. At this point I am able to access both devices web interfaces by their IPs on a browser (192.168.123.254 for the router and 192.168.0.1 for the cable modem). The problem I have is when I connect to a VPN from the computer. Then I am connected to a second network 10.0.0.0/24 and I get IP 10.0.0.200 (along with 192.168.123.126). I can connect to the router but then I loose connectivity to the cable modem: I cannot acces it through the browser, neither making a ping to it or a tracert. I have tried to add a new route to the windows routes by typing route ADD 192.168.0.1 MASK 255.255.255.0 192.168.123.254 but I cannot access it anyway... Am I missing something on the route adding? Which is the propper way of doing this? Thanks

    Read the article

  • How to recover a Linksys WRT54GL router that has a blinking green power LED and no response from the

    - by Peter Mounce
    I was flashing the router with the Tomato firmware, but something went wrong; I'm not sure what. Now, the router responds to ping at 192.168.1.1 (my Mac's on a static IP 192.168.1.21), but the web-interface doesn't come up. I have read that this situation is recoverable in a [couple of places][2], but I haven't been having much success and so I wondered whether anyone could help. From my Mac (OSX 10.5) I have tried to tftp a new vanilla-Linksys firmware to the router and reboot; according to the trace, this sends it but the router behaves no differently after a reboot. I've read that if boot_wait is turned on, I'll have an easier time, but I haven't been able to find any instructions that tell me how I can tell whether I did this or not (I don't think I have, but I might have, when I tinkered the first time months ago - the router has worked since then, though). I have found a couple of references to [something called JTAG][3], which seems like some kind of [homebrew diagnostic cable thing][4], but that's a little beyond my ken. Happy to try it, with muppet-level instructions, though (I do software, not hardware!). So, I'm at a bit of a loss, really, and wondered whether anyone could provide me with the route (ha. ha.) out of this mess? Hm, I can't post all the links I wanted to until I have some more reputation.

    Read the article

  • bond0 and xen = crash

    - by Rajat
    Bonding with xen 1 - Stop all guests. Reboot dom0 after running "chkconfig xend off" and "chkconfig xendomains off". 2 - Configure bond0 by enslaving eth0 and eth1 to it. I added the below two entries to /etc/modprobe.conf. alias bond0 bonding options bond0 mode=6,miimon=100 Content of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none Content of /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none Content of /etc/sysconfig/network-scripts/ifcfg-bond0 DEVICE=bond0 IPADDR= NETMASK= ONBOOT=yes BOOTPROTO=static USERCTL=no Did "modprobe bond0" and "service network restart" after that. 3 - Edit /etc/xen/xend-config.sxp Change (network-script network-bridge) To (network-script 'network-bridge netdev=bond0') 4 - Start xend. "service xend start". 5 - chkconfig xend on. 6 - modprode bond0 7 - more /proc/net/bonding/bond0 8 - Create guest images as usual and bridge it to xenbr0. about config i did for my xen kernel rhel 5.3 after i reboot the host server i get in place bond0 get pbond0 and its get disconnect from network only i ping to my vm's on the host server any one have any idea why xen bond0 is acting like that or what is solutions to come out of pbond0 to bond0.

    Read the article

  • GRE Tunnel over IPsec with Loopback

    - by Alek
    Hello, I'm having a really hard time trying to estabilish a VPN connection using a GRE over IPsec tunnel. The problem is that it involves some sort of "loopback" connection which I don't understand -- let alone be able to configure --, and the only help I could find is related to configuring Cisco routers. My network is composed of a router and a single host running Debian Linux. My task is to create a GRE tunnel over an IPsec infrastructure, which is particularly intended to route multicast traffic between my network, which I am allowed to configure, and a remote network, for which I only bear a form containing some setup information (IP addresses and phase information for IPsec). For now it suffices to estabilish a communication between this single host and the remote network, but in the future it will be desirable for the traffic to be routed to other machines on my network. As I said this GRE tunnel involves a "loopback" connection which I have no idea of how to configure. From my previous understanding, a loopback connection is simply a local pseudo-device used mostly for testing purposes, but in this context it might be something more specific that I do not have the knowledge of. I have managed to properly estabilish the IPsec communication using racoon and ipsec-tools, and I believe I'm familiar with the creation of tunnels and addition of addresses to interfaces using ip, so the focus is on the GRE step. The worst part is that the remote peers do not respond to ping requests and the debugging of the general setup is very difficult due to the encrypted nature of the traffic. There are two pairs of IP addresses involved: one pair for the GRE tunnel peer-to-peer connection and one pair for the "loopback" part. There is also an IP range involved, which is supposed to be the final IP addresses for the hosts inside the VPN. My question is: how (or if) can this setup be done? Do I need some special software or another daemon, or does the Linux kernel handle every aspect of the GRE/IPsec tunneling? Please inform me if any extra information could be useful. Any help is greatly appreciated.

    Read the article

  • Valid IP address but can't surf without rebooting

    - by Kat
    I periodically lose internet and router connection at home. When this happens, others are using the router just fine. I am connecting directly through a wired connection to a Belkin router. I can release and renew the IP (and the IP addresses change to 0.0.0.0 and to an IP in my router's range beginning with 192.168.2. as they should) but still can't surf, can't access the router interface. Cycling the router doesn't help, and again, others are able to access the router fine at this time. Only rebooting the computer resolves the issue, and everything is wonderful for a few hours- and then I lose connection again. I have several ideas where to go from here, but I'd like to get some advice first. (Using Windows XP SP3, hardwired connection) Update As stated in the originally, releasing and renewing doesn't solve the issue. However, I have an update. I can ping localhost and my router IP with no problem at all when the issue occurs. However, repairing the network connection does not help. I AM able to get back on by disabling and then re-enabling the network connection in XP. What does that tell us?

    Read the article

  • Excael 2007: Name range problems when linking workbooks

    - by Mike
    I've 30+ workbooks each with 5 specific worksheets (formated the same). Each worksheet's data needs to be linked to a master workbook, so that I end up with 5 master workbooks and all the specific data in one long table format $A$2:$I$750. (Are you still with me? ;)) I don't have access to a database, so I'm having to link the sheets to their master workbook directly. I've highlighted the data I need; named the range; and then tried referencing this from my master workbook. I get the #Value error symbol when I try to link (=[WorkbookName]!MyNamedRange) to a cell that doesn't match the top left cell of my range. Example: MyNamedrange is always =$A$2:$I43$ on one specific sheet. On my master workbook it works if it's referenced at A2 but I get #Value if it's referenced A1, or A44. Any ideas? I'm trying to link my data in one continous table so I can run a pivot on it, and other things. Can it be done like this, or should I just copy and paste? I'm trying to keep things 'linked'so I do not need to spend time C&Ping all day. Many thanks Mike.

    Read the article

  • How to route to a secondary interface on the same physical ethernet?

    - by sjose3612611
    INTERNET<->(wan)BRIDGED_DEVICE(lan)<->ETH_ROUTER<->LAN Problem: Need to access web server on BRIDGED_DEVICE's LAN from INTERNET via ROUTER (BRIDGED_DEVICE's web server cannot be accessed form INTERNET since it has no Public management IP). Cannot configure bridged device. It has a static IP on its LAN to which its web server binds. Attempt: Create a secondary/alias WAN Interface on ETH_ROUTER (e.g Primary: eth0.1 (for internet access) and Secondary: eth0.2 (for accessing web server on BRIDGED_DEVICE), (No VLANs). eth0.1 has a public IP; eth0.2 has a static private IP in the BRIDGED_DEVICE's subnet (e.g 10.0.X.Y). Iptables on ETH_ROUTER: Added a port forward (DNAT) from eth0.1 to eth0.2: iptables -t nat -I PREROUTING -i eth0.1 -p tcp --dport 80 -j DNAT --to-destination 10.0.X.Y iptables -t nat -I POSTROUTING -o eth0.2 -s 10.0.X.0/24 -j MASQUERADE Stateful firewall w/ overall drop policy on FORWARD chain, hence: iptables -I FORWARD -i eth0.1 -d 10.0.X.Y -p tcp --dport 80 -j ACCEPT Can ping from ETH_ROUTER to BRIDGED_DEVICE but unable to reach the web server from Internet. I see packet cont increasing for the DNAT rule but not sure where it disappears in the ETH_ROUTER after that. ETH_ROUTER is the only device that can be configured to achieve this. If familiar with this scenario, please suggest what I may be missing or doing wrong here or suggest techniques to debug?

    Read the article

  • Linksys wireless router will not hardware reset.

    - by Jack M.
    Hello, all. I'm unable to make my router perform a hardware reset, and I cannot understand why. All was working well, except that my iPhone could not connect to the wireless. I found that the router was only allowing AES encryption on WPA2 Personal mode, so I upgraded the firmware. I updated the firmware to Ver.1.06.1, and everything went screwy. The router is no longer showing up in the WiFi list (as Linksys, or its previous network name). Wiring into the router gives me an IP address from my ISP (24.121.121.XXX). Attempting to do a hardware reset, but the power light never starts flashing and the router does not seem to reboot. My machine wired in is still online with no interruption in WoW. Pulling the power cord to force a reset returns it to the same state. I even went so far as to pull up my previous IP address (from DynDNS) and try to connect to that, but it wont even ping. What I'm trying to find out is: Did the new firmware fry the thing, or is there some way to fix this? Thanks in advance for any help.

    Read the article

  • OpenVPN (Tunnelblick) Suddenly Dropping Constantly

    - by Jeremy Privett
    I've been using Tunnelblick on my Mac for OpenVPN for about a year now. All of a sudden, this morning, it decided that it was going to take a nasty turn for the worse with no explanation. Here are the symptoms I'm seeing: I can connect to the VPN fine, initially. After about 2 - 5 minutes of no interruption, the connection suddenly dies. I can still see the VPN route using netstat -rn, and Tunnelblick believes it's still connected. No VPN traffic can go through and I can't even ping the VPN gateway. Eventually, Tunnelblick will catch on that the connection has died (usually about 5 - 10 minutes later) and shoot itself to restart and then the cycle starts over again. I've tried everything I can think of to figure this one out. I've completely flushed my system by rebooting and removing Tunnelblick and all traces of OpenVPN from my system and re-installing from scratch. No dice, same problem. I'm at my wits end, because I desperately need to get this fixed as the VPN is required for me to be able to do my job. Any ideas you have would be greatly appreciated.

    Read the article

  • Some guest networking and VMware Tools functionality broken with Sprint SmartView on the host

    - by Mads
    Using VMware Workstation 6.5.3 on Vista 64-bit. I started having problems with VMware networking about 6 months ago after upgrades to Sprint SmartView. I did not have problems previously, but I don't know if that is because I was lucky. The main symptoms of the problem when SmartView is installed are: I can no longer drag files from the host to copy them to the guest. When they are dragged, the disallowed cursor (the circle with a slash) shows in the guest. If I try to enable shared folders in the guest while it is running, I will not be able to see the shared files and will be informed that networking is not working. I can still ping guests from the host and I can still access network services via NAT most of the time when connected via my USB broadband adapter. When I configure shared folders so they are "always enabled" (with a mapped drive), I can access files on the via the mapped folders. I can also copy the file on the host and then paste it in the guest, as was suggested in some other threads concerning drag-and-drop problems that I found. The VMware Tools icon is showing in all cases and I don't see any obvious errors in the host's event viewer. If I uninstall SmartView, the problems disappear. If SmartView (current version is 2.28.0082) is reinstalled I will experience the same problems. I have tried uninstalling/reinstalling VMware and SmartView in various ways but it appears tha these problems are consistent when SmartView is installed (not just when it is running or connected, but when it is present on the system). I'm wondering if this is a combination of software (WS 6.5.3, Vista64, and SmartView) that works for other people, which would indicate a problem that is peculiar to my configuration.

    Read the article

  • Internal/External Moodle - DNS

    - by Chief17
    Network diagram: I have a moodle (a VLE) setup that I want to be internally and externally accessible. The green route on the diagram below is the route I would like the traffic to take when the user is inside the LAN, and the red route is seemingly what it does take. The website has a domain name (like most websites do). From the User PC, if I ping the domain name, I get the internal IP of the webserver (because of a hosts file entry), if I nslookup the domain name I also get the internal IP of the webserver (because of an A record on my DNS server). Running the same two commands on the webserver gives me the webservers external IP. (going well so far) If I use PHPs gethostbyname() on the moodle website and use domain name as a parameter (getting php/apache to resolve the hostname) it returns the exernal IP of the webserver (good news, DNS seems to be doing what I want it to). All things so far seem to be going well. The only thing that is confusing me and preventing the moodle single sign on from working is the fact that if I get moodle to show my IP address, it says that it is an external one (outside my NATting firewall) when it should show an internal IP. This is the issue, any ideas on how to go about resolving this? Any ideas on tests I can perform (I have also tried a tracert and the request goes directly to the webserver), anything? Thanks all!

    Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >