Search Results

Search found 6870 results on 275 pages for 'usb powered'.

Page 90/275 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• Prevent Windows 7 prompt format USB HDD

  - by mike

  I am running Windows 7. I have a USB HDD 100% formatted with a Trucypt partition. When I insert the drive into my system, Windows asks if I would like to format the drive, each time I insert the drive. So how do I turn this prompt off? If so, I would prefer it be applied globally (e.g. no more prompts for any other drives). Since its an invisible partition unless mounted with Trucypt, Windows is always going to think nothing is there and continue to prompt me. I don't want to hit enter on the keyboard a few times by mistake doing something else and have it to go through the process. I'll lose everything. It is all backed up BTW. Will just be inconvienient.

  Read the article

• problem in exporting a partition on a usb stick as nfs volume

  - by Bond

  I have a USB disk which has 2 partitions.I exported one of them (on NFS) and now I am trying to mount it at client machine. Each time it gets error mount -t nfs 192.168.1.19:/media/vol2 /mnt/nfs/ mount.nfs: access denied by server while mounting 192.168.1.19:/media/vol2 Here is the /etc/exports file entry showmount -e on nfs server gives Export list for bond: /media/vol2 */24 On the client machine nfs-client package is installed. What more I need to check? Is it logged some where?

  Read the article

• How to use an USB digitizer?

  - by Magnetic_dud

  Hello, i am in China now, and when i saw an USB digitizer (resistive), i bought it, thinking that i could be used as a mouse. When i connect it to my windows 7 rc1 laptop, the system properties says "pen input available" But, nothing happens when i touch the panel... i installed the bundled drivers, in chinese only, and NOT in unicode (so the text is garbled) When i install the driver, i get access to a special key on the tablet, "switch from pen input to mouse", and the driver will move the pointer according to the position on the tablet. (but no click) If i use the "pen mode", the computer will use a special chinese IME that is very awkard, i want to use the microsoft ime, and be able to draw/take notes on the screen There are "generic" drivers? Or just a plain mouse driver that will click when i press on the surface The tablet name is "qiancai"

  Read the article

• Personal wiki on usb / the cloud?

  - by drby

  I'm looking for a personal wiki that can be installed on an usb stick and (more importantly) somewhere on the cloud (dropbox). I've looked at the Wiki Matrix, but I really don't care that much about any of the options, so I end up with a choice between ~50 wikis at the end. Tried out TiddlyWiki but there are some things that really annoy me like the fact that all pages get opened on the same page. It really looks like it'd turn into a giant mess pretty quickly. I'd like to have something that's pretty close in terms of appearance and usability to wikipedia. Hierarchical categories for organization would be really nice. And accessible storage (in case I ever want to convert it to something else).

  Read the article

• HALEVT troubleshooting: VFAT usb storage device gets mounted with root:root user:group

  - by Nova deViator

  Hi, i'm banging my head for number of days around this problem. using Halevt for automounting, everything mostly works, but the only thing is that Halevt mounts external USB storage devices as root. So, as user i cannot write to files on them. Halevt gets run as halevt user on boot through /etc/init.d script. This is Ubuntu Lucid with Awesome WM. No GDM. Running halevt as user seem to not work (halevt runs but doesn't respond on Insert) I know HAL is deprecated and removed and i should probably write my own UDEV rules, but until then it seems there must a be simple hack that enables mounting VFAT/NTFS devices with specific uid/gid. this question/answer helps a lot, but not specifically to the above.

  Read the article

• IBM PS/2 Keyboard with OS X 10.6 and PS2->USB Converter

  - by public static void

  Just got a new Mac Pro at work and as I can't stand the ZX Spectrum-esque 'dead flies' feel of the new Apple keyboards, I brought my trusty IBM SpaceSaver II to the office (with a USB/PS2 adapter) All seems generally to work ok - even the Trackpoint 'nipple' but periodically the modifier keys, notably the Ctrl and Windows keys seem to go into 'sticky' mode so that typing an 'S' brings up the save dialog, 'O' = open dialog etc. etc. Its generally fixed by switching windows and then returning back to the offending one, but this is really beginning to cheese me off. Can anyone suggest a fix?

  Read the article

• Cannot copy files from external USB HDD to computer

  - by Thomas Versteeg

  Hello I have a HDD disk connected with a USB converter to my computer. It consists of two partitions, the first one is mounted automatically and I can grab all the files from it, but the second one I have to mount manually as a root in the command line, if I try to open it with nautilus it gives an error. The drive where the problem is is drive sdb1, sdb2 has the same settings but works fine. I am using Debian Wheezy. This is the fstab: /dev/sdb1 /media/usb0 auto defaults,gid=disk,umask=0777 0 0 /dev/sdb2 /media/usb1 auto defaults,gid=disk,umask=0777 0 0 And when I try to copy the files with this command (as root) cp -vr /media/usb0/* /home/user/Videos/ I get these types of errors: cp: reading `/media/usb0/.lang/file.ext': Permission denied cp: failed to extend `/home/user/Videos/.lang/file.ext': Permission denied How can I at least copy the files to my main HDD? I don't need to adjust them I only need to copy them!

  Read the article

• My computer resets when i try to install Windows 7 (USB/DVD)

  - by Ranhiru

  I had a troublesome software starting up when Windows 7 was starting and i had no way to remove it because i couldn't log in to Windows. Not even safe mode. But i used Hiren's Boot CD to edit the registry to stop that software from starting up... But my efforts were not useful as Windows kept on going to an ultimate freeze just before the login screen should have been shown. And just freezes and I cannot do anything. So i decided heck with it and i now want to format the disk and reinstall a fresh copy of Windows 7. But now regardless of USB or DVD i use to boot the setup, it loads fine till you see the animating Windows and it just resets the laptop! Just plain resets! Hiren's Boot CD and Mini XP, strange enough but still works :( Any ideas what might be causing the laptop to reset in Windows 7 setup?

  Read the article

• Problem whit usb wireless mouse

  - by aiacet

  Recently i have thi problem whit my wireless mouse (Trust model on: www.trust.com/15313). Sometimes when i start the Pc or during a game the pointer/arrow stop to move it. In the Pc start the pointer is blocked on the center of the screen. If I'm lucky i have to chance the USB wirless adapter from port 1 to port 2 but sometimes this trick doesn't work i to use the mouse i have to restart. Like you can see in the productor webpage this mouse don't have the direver but only a tool to solve some problem. Thank you in advance to all the "super-users" that reading this question would be help me Ajax

  Read the article

• ARM Debian (squeeze) USB driver with mismatch 3.3.3 kernel but /lib/modules/2.6.36

  - by frank

  Hei guys, my sheevaplug embedded server works fine, but when I wanted to use USB, the device gets not attached to /dev/tty/USB0 lsusb shows correctly: Bus 001 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port an modprobe usbserial raises: FATAL: Could not load /lib/modules/3.3.3/modules.dep: No such file or directory in the /lib/modules/ Folder there is instead a 2.6.36-Folder uname -r gives 3.3.3 How can I overcome this mismatch? Can I create a symlink? I can't flash this embedded device since it is deployed somewhere, only ssh? Please advise!

  Read the article

• Problem with usb wireless mouse

  - by aiacet

  Recently I have started having problems with my wireless mouse (Wireless Optical Mouse MI-4910D). Sometimes when I start my PC or during a game the pointer/arrow stops moving. When the PC boots the pointer is locked in the center of the screen. If I'm lucky it helps to change the USB wireless adapter from port 1 to port 2 but sometimes this trick doesn't work and I have to restart my PC to get the mouse to work again. Like you can see in the product web page this mouse don't have a driver but only a tool to solve some problems. Thank you in advance to all the "super-users" that reading this question would be help me Ajax

  Read the article

• Using a 3g usb dongle as Cisco router access point

  - by beakersoft

  We have an office opening, and we aren't going to have comms into the building when management want the building to open. Our only option (I think) Is to try and hook up a 3/4g dongle to something to act as the access point, and send all the traffic via that. The model of router we use wont support the usb dongle, so we need some sort of 'bridge' My idea was to build a Linux box, plug the dongle into that and then via the Ethernet ports plug the router in. We need the Cisco router in the equation as we create VPN connections over that back to head office. My question is will this work?

  Read the article

• USB webcam detected in KVM, but doesn't work

  - by Gene Vincent

  I have installed XP in a virtual machine running on Linux with QEMU/KVM (qemu-kvm-0.11.0-4.5.2). I export my Linux webcam to KVM using the switches "-usb -usbdevice host:046d:0929". The XP guest sees the webcam and the drivers install, but the camera only shows a black image. When I open the camera in Windows Explorer, it says "0 images" and a black image, while on a real XP, it says "1 image" and shows the video from the camera. I tried the same with a different webcam, but the result is the same. Any ideas what might be wrong or how I could debug this ?

  Read the article

• Routers with USB plug to connect external storage

  - by sixtyfootersdude

  I am just about to buy a new wireless router. I want to be able to hook up a harddrive to it and let the harddrive serve the entire network. I will mostly be storing media and some backups on the drive. I know I could get some kind of NAS but I would prefer to just hook up one of my many unused hard drives directly to my router. It looks like d-link has several products that do this using shareport. If you were wanting to have network storage how would you do it? With a NAS? Using a router with a USB port. Are these systems robust? What router would you buy?

  Read the article

• Data transfer speed to USB storage connected to wifi router very slow

  - by RonakG

  Here is my setup. A Linksys Cisco E3200 wifi router. A MacbookPro running OS X Lion 10.7.4. A Seagate GoFlex 1TB hard drive connected to wifi router via the USB port. When I try to transfer data from my MBP to the HDD, the data transfer rate is very low. I'm getting around 3MB/s write speed. This is very slow compared to the speed I get when HDD is directly connected to the MBP. The HDD is NTFS formatted. And the router provides access to HDD using Samba share. So I connect to the HDD using smb://. What is the limiting factor here affecting the data transfer rate?

  Read the article

• Audio problems with asus notebook with Bluetooth and usb devices in win 7

  - by QuickSilver

  My notebook is Asus P53E - core i5 Windows 7 installed Audio from PC speakers and headphone is distorted when i turn on bluetooth or some usb device plugged in. I belive this is a software issue. I tried updating my audio drivers but nothing help. Any help will be appreciated. Update: After a few days digging I found that this problem is causing by the asus sound enhancement application SonicFocus. The distortion stops while turning off sonic focus. Can anyone help me with a solution other than turning off SonicFocus

  Read the article

• How to use a D-Link usb network adapter on debian

  - by Barranka

  I have a Debian (squeeze) desktop, and I need to use a D-Link 150 USB Wireless Network Adapter. So far I've done this: $ lsusb ... Bus 001 Device 006: ID 2001:3c18 D-Link Corp. ... After looking for a solution in google, I found that I needed to install the following package: firmware-ralink_0.28+squeeze1_all.deb I've installed it, but Debian doesn't want to find the adapter. When I run lsmod, I can't find what I'm supposed to find: rt2870sta Can you point me in the right direction?

  Read the article

• Windows 7 automatically install usb driver

  - by Dan

  I have tried to install usb driver for Samsung arndale on Windows 7. Now it has two entries in Device Manager. I can not uninstall the one with question mark. If I uninstall both of them, when I plug in the hardware, Windows 7 will automatically install both of the entries when the circuit pulg in. I don't get the chance to choose the right driver. When I try to update the wrong driver, it says found the driver but can not install it.

  Read the article

• Linux - Network Sharing a local NTFS usb drive

  - by Jonathan Rioux

  I have an external hard drive formated in NTFS which I would like to be able to access by the network. I want to make a network share out of it. I also have a Debian machine running in my house and I then got an idea. I want to plug in my external hard drive (usb) into my Debian machine, and make a windows share with it, maybe with Samba, so I will be able to access it from my Windows 7 laptop and see it as a network share. Additionally, how can I restrict specific folders of that network share, and allow only specific folders to specific users? For instance, I would like to give my girlfriend access to a folder of her name so she can put her files and so she wont be able to see the stuff in my folder...

  Read the article

• Stream computer screen to TV via network instead of a USB wireless link

  - by user24559

  I want to stream my computer screen (not just video or a limited amount of content) to my TV via the network. I know there are wireless devices that use USB to tranfer the screen to the TV. However, these are limited to a short distance. What I want to do is stream the data via the network so I can be anywhere within the network and have the data shown on the tv. I am looking for video and sound to transfer. I want the entire computer screen to transfer just like when you connect the computer to the tv via VGA or HDMI and the sound out using the 3.5mm plug. I have been unable to find a unit that allows for the entire computer screen to transfer via the network. I just find the ability to stream video. I am using Windows 7 Ultimate with a quad processor and 16 GB of memory so I have the power to handle the transfer. My tv is hdtv.

  Read the article

• Unable to read USB External HD after aborted back up

  - by Stjepan

  I have two PC laptops. On one of the two PC's (Win 7) I Aborted a back up and ejected the drive. Now that same pc wants to format the drive. I plugged the drive into the other pc (Win XP) and that one reads the drive and all data stored. Why does one want to format the drive and the other does not? .... My apologies for not being clearer with my original question and thanks for the responses, so; The drive is not a flash stick, its an external WD Hard drive plugged in via the USB. The two tips provided did not resolve the issue. Strangely, the pc with win XP can read the drive but the pc that the HD was plugged into when the backup was aborted still wants to format the drive. Stjep

  Read the article

• recommendations for disk -> usb backup software

  - by TWood

  Recently I lost a tape drive and rather than repair the unit I decided that backups to usb external drives would be cheaper. In the past I used NTBackup and figured that the new server 2008 R2 backup wbadmin utility would be able to meet my needs. It does not. I am looking for recommendations for another utility that i can use. My requirements are: -backup local disk in addition to files on a network share -scheduled task integration (or some gui options to manage schedule) -non-incremental backup Basically I could do this all with WBAdmin if it just supported network shares. I saw some links that described attaching a vhd pointed to a network share but I am trying to avoid hacks like that. If i'm going to do all that trouble I'd just as well manually copy the directories over myself. If anyone has any software suggestions that might make this task easier for me let me know please. I am considering BackupAssist but can only find a few reviews here and there for it.

  Read the article

• How can I create a bootable CD-ROM/USB Drive? (With NTFS + USB Drive support)

  - by RonK

  My motherboard got fried and I was forced to get a new hardware set (MB+CPU+RAM) so in most likelyhood I'll need to reinstall my Windows 7. I usually follow procedure and put the OS on the primary partition and my data on a logical partition - so I can format the primary without concern - but this time I made a mistakte and left some crucial items on the primary partition. I want to create a bootable CD-ROM/USB Drive which can read NTFS so I can access this data. If booting via a CD-ROM, I would prefer being able to connect a disk-on-key/My Passport to the computer and be able to access it to transfer the data to it. How can I do it? (free 3rd party applications are most welcome)

  Read the article

• Using Fantom USB Driver from JNI

  - by Starky

  I'm having some difficulty with JNI. I'm using JNI to call some Java methods from a C++ program. This implementation of JNI is working fine. The goal of the Java program is to send commands over USB to a LEGO robot using LEJOS. This works fine when running the Java program by itself but for some reason when I call the methods from C++ the robot cannot be detected. My only lead so far is that there may be some problem using the Fantom USB driver from a JNI call. This is the driver that's used for the USB connection to the robot. I've had a quick look at the code for the driver and it looks like it makes use of JNI too. So I guess I'm asking the following things: What differences could there be between calling code from JNI and executing it through command prompt with the 'java classname args' method which could cause this problem? Could it be that there is some problem with me using JNI in C++ when the driver that's being used uses JNI as well? I won't post any code just now as I don't think it's really relevant but if anyone thinks that they need to see it then I can add it.

  Read the article

• Opening my application when a usb device is inserted on Windows using WMI

  - by rsteckly

  Hi, I'm trying to launch an event when someone plugs in a usb device. For now, I'm content to simply print something to the console (in the finished product, it will launch an application). This code is very loosely adapted from: http://serverfault.com/questions/115496/use-wmi-to-detect-a-usb-drive-was-connected-regardless-of-whether-it-was-mounted There's two problems: 1) I need to pass the argument to Management scope dynamically because this will be installed on computers I don't use or whose name I don't know. 2) I'm getting an invalid namespace exception when I call w.Start(); Any ideas what I'm doing wrong? static ManagementEventWatcher w=null; static void Main(string[] args) { AddInstUSBHandler(); for(;;); } public static void USBRemoved(object sneder, EventArgs e) { Console.WriteLine("A USB device inserted"); } static void AddInstUSBHandler() { WqlEventQuery q; ManagementScope scope = new ManagementScope("HQ\\DEV1"); scope.Options.EnablePrivileges=true; q=new WqlEventQuery(); q.EventClassName+="_InstanceCreationEvent"; q.WithinInterval=new TimeSpan(0,0,3); q.Condition=@"TargetInstance ISA 'Win32_USBControllerdevice'"; w=new ManagementEventWatcher(scope,q); w.EventArrived+=new EventArrivedEventHandler(USBRemoved); w.Start(); }

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >