Search Results

Search found 3993 results on 160 pages for 'broken pipe'.

Page 91/160 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

  • password limitations in SQL Server and MySql

    - by asteroid
    Does MySql 5.1 and SQL Server 2008 (Web edition, Standard) have any functional password limitations other than length limits? Are metacharacters in any form a bad idea to use, like bang, pipe, hash, any slash, carrot, and so on? I know that MySql 5.1 has a password length limitation of 16 characters that is hardcoded, but I was wondering, are any metacharacters (i.e. non alphanumerics) a bad idea to use? And is this true in SQL Server 2008 Web edition, Standard? So specifically: can symbols like: /`~:}{[]^ be used successfully? I would hope it doesn't matter to the database, but I don't understand enough about password storage in enterprise database systems yet to know for sure, and I was looking for confirmation or an explanation.

    Read the article

  • If a command line program is unsure of stdout's encoding, what encoding should it output?

    - by mackstann
    I have a command line program written in Python, and when I pipe it through another program on the command line, sys.stdout.encoding is None. This makes sense, I suppose -- the output could be another program, or a file you're redirecting it into, or whatever, and it doesn't know what encoding is desired. But neither do I! This program will be used by many different people (humor me) in different ways. Should I play it safe and output only ascii (replacing non-ascii chars with question marks)? Or should I output UTF-8, since it's so widespread these days?

    Read the article

  • Using popen() to invoke a shell command?

    - by Anvar
    When running the following code through xcode I get inconsistent behavior. Sometimes it prints the git version correctly, other times it doesn't print anything. The return code from the shell command is always 0 though. Any ideas on why this might be? What am I doing wrong? #define BUFFER_SIZE 256 int main (int argc, const char * argv[]) { FILE *fpipe; char *command="/opt/local/bin/git --version"; char line[BUFFER_SIZE]; if ( !(fpipe = (FILE*)popen(command, "r")) ) { // If fpipe is NULL perror("Problems with pipe"); exit(1); } while ( fgets( line, sizeof(char) * BUFFER_SIZE, fpipe)) { // Inconsistent (happens sometimes) printf("READING LINE"); printf("%s", line); } int status = pclose(fpipe); if (status != 0) { // Never happens printf("Strange error code: %d", status); } return 0; }

    Read the article

  • Limit output of all Linux commands

    - by daniel
    I'm looking for a way to limit the amount of output produced by all command line programs in Linux, and preferably tell me when it is limited. I'm working over a server which has a lag on the display. Occasionally I will accidentally run a command which outputs a large amount of text to the terminal, such as cat on a large file or ls on a directory with many files. I then have to wait a while for all the output to be printed to the terminal. So is there a way to automatically pipe all output into a command like head or wc to prevent too much output having to be printed to terminal?

    Read the article

  • Is there a way to redirect ONLY stderr to stdout (not combine the two) so it can be piped to other programs

    - by James K
    I'm working in a Windows CMD.EXE environment and would like to change the output of stdout to match that of stderr so that I can pipe error messages to other programs without the intermediary of a file. I'm aware of the 2>&1 notation, but that combines stdout and stderr into a single stream. What I'm thinking of would be something like this: program.exe 2>&1 | find " " But that combines stdout and stderr just like: program.exe | find " " 2>&1 I realize that I could do... program 2>file type file | find " " del file But this does not have the flexibility and power of a program | find " " sort of notation. Doing this requires that program has finished with it's output before that output can be processed.

    Read the article

  • Best way to convert Stream (of unknown length) to byte array, in .NET?

    - by Frank Hamming
    Hello, I have the following code to read data from a Stream (in this case, from a named pipe) and into a byte array: // NPSS is an instance of NamedPipeServerStream int BytesRead; byte[] StreamBuffer = new byte[BUFFER_SIZE]; // defined elsewhere (less than total possible message size, though) MemoryStream MessageStream = new MemoryStream(); do { BytesRead = NPSS.Read(StreamBuffer, 0, StreamBuffer.Length); MessageStream.Write(StreamBuffer, 0, BytesRead); } while (!NPSS.IsMessageComplete); byte[] Message = MessageStream.ToArray(); // final data Could you please take a look and let me know if it can be done more efficiently or neatly? Seems a bit messy as it is, using a MemoryStream. Thanks!

    Read the article

  • check if a process is running in python

    - by shash
    I am trying to find if the process is running based on process id. The code is as follows based on one of the post on the forum. I cannot consider process name as there are more than one process running with the same name. def findProcess( processId ): ps= subprocess.Popen("ps -ef | grep "+processId, shell=True, stdout=subprocess.PIPE) output = ps.stdout.read() ps.stdout.close() ps.wait() return output def isProcessRunning( processId): output = findProcess( processId ) if re.search(processId, output) is None: return true else: return False Output : 1111 72312 72311 0 0:00.00 ttys000 0:00.00 /bin/sh -c ps -ef | grep 71676 1111 72314 72312 0 0:00.00 ttys000 0:00.00 grep 71676 It always return true as it can find the process id in the output string. Any suggestions? Thanks for any help.

    Read the article

  • In 12.04: Failed to load session 'ubuntu' [closed]

    - by Stéphane
    Possible Duplicate: There's an issue with an Alpha/Beta Release of Ubuntu, what should I do? I'm using 12.04 beta. Today I was prompted to install some updates, which I did, followed by a reboot. On reboot, X starts, but all I see is a single dialog window in the middle of the screen with the text: Failed to load session 'ubuntu' I don't even see the mouse, or the login screen, just this 1 line of text. When I hit CTRL+ALT+F1 to run dist-upgrade from a command prompt, I get this: The following packages have been kept back: libgnome-desktop-3-2 So to see why it was kept back, I tried the following: $ sudo apt-get install libgnome-desktop-3-2 ... The following packages have unmet dependencies: libgnome-desktop-3-2 : Depends: gnome-desktop3-data (= 3.3.92-0ubuntu1) but 3.3.91-0ubuntu2 is to be installed E: Unable to correct problems, you have held broken packages. Anyone else seeing this, or have an idea how to fix it? If you're going to close it as a duplicate, can you please link to the duplicate question?

    Read the article

  • Resolve a URL from a Partial View (ASP.NET MVC)

    Working on an ASP.NET MVC application and needed the ability to resolve a URL from a partial view. For example, I have an image I want to display, but I need to resolve the virtual path (say, ~/Content/Images/New.png) into a relative path that the browser can use, such as ../../Content/Images/New.png or /MyAppName/Content/Images/New.png. Astandard view derives from the System.Web.UI.Page class, meaning you have access to the ResolveUrl and ResolveClientUrl methods. Consequently, you can write markup/code like the following:' /The problem is that the above code does not work as expected in a partial view. What's a little confusing is that while the above code compiles and the page, when visited through a browser, renders, the call to Page.ResolveClientUrl returns precisely what you pass in, ~/Content/Images/New.png, in this instance. The browser doesn't know what to do with ~, it presumes it's part of the URL, so it sends the request to the server for the image with the ~ in the URL, which results in a broken image.I did a bit of searching online and found this handy tip from Stephen Walther - Using ResolveUrl in an HTML Helper. In a nutshell, Stephen shows how to create an extension method for the HtmlHelper class that uses the UrlHelper class to resolve a URL. Specifically, Stephen shows how to add an Image extension method to HtmlHelper. I incorporated Stephen's code into my codebase and also created a more generic extension method, which I named ResolveUrl.public static MvcHtmlString ResolveUrl(this HtmlHelper htmlHelper, string url) { var urlHelper = new UrlHelper(htmlHelper.ViewContext.RequestContext); return MvcHtmlString.Create(urlHelper.Content(url)); }With this method in place you can resolve a URL in a partial view like so:' /Or you could use Stephen's Html.Image extension method (althoughmy more generic Html.ResolveUrl method could be used in non-image related scenarios where you needed to get a relative URL from a virtual one in a partial view). Thanks for the helpful tip, Stephen!Happy Programming!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Resolve a URL from a Partial View (ASP.NET MVC)

    Working on an ASP.NET MVC application and needed the ability to resolve a URL from a partial view. For example, I have an image I want to display, but I need to resolve the virtual path (say, ~/Content/Images/New.png) into a relative path that the browser can use, such as ../../Content/Images/New.png or /MyAppName/Content/Images/New.png. Astandard view derives from the System.Web.UI.Page class, meaning you have access to the ResolveUrl and ResolveClientUrl methods. Consequently, you can write markup/code like the following:' /The problem is that the above code does not work as expected in a partial view. What's a little confusing is that while the above code compiles and the page, when visited through a browser, renders, the call to Page.ResolveClientUrl returns precisely what you pass in, ~/Content/Images/New.png, in this instance. The browser doesn't know what to do with ~, it presumes it's part of the URL, so it sends the request to the server for the image with the ~ in the URL, which results in a broken image.I did a bit of searching online and found this handy tip from Stephen Walther - Using ResolveUrl in an HTML Helper. In a nutshell, Stephen shows how to create an extension method for the HtmlHelper class that uses the UrlHelper class to resolve a URL. Specifically, Stephen shows how to add an Image extension method to HtmlHelper. I incorporated Stephen's code into my codebase and also created a more generic extension method, which I named ResolveUrl.public static MvcHtmlString ResolveUrl(this HtmlHelper htmlHelper, string url) { var urlHelper = new UrlHelper(htmlHelper.ViewContext.RequestContext); return MvcHtmlString.Create(urlHelper.Content(url)); }With this method in place you can resolve a URL in a partial view like so:' /Or you could use Stephen's Html.Image extension method (althoughmy more generic Html.ResolveUrl method could be used in non-image related scenarios where you needed to get a relative URL from a virtual one in a partial view). Thanks for the helpful tip, Stephen!Happy Programming!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Upgrading log shipping from 2005 to 2008 or 2008R2

    - by DavidWimbush
    If you're using log shipping you need to be aware of some small print. The general idea is to upgrade the secondary server first and then the primary server because you can continue to log ship from 2005 to 2008R2. But this won't work if you're keeping your secondary databases in STANDBY mode rather than IN RECOVERY. If you're using native log shipping you'll have some work to do. If you've rolled your own log shipping (ahem) you can convert a STANDBY database to IN RECOVERY like this:   restore database [dw]   with norecovery; and then change your restore code to use WITH NORECOVERY instead of WITH STANDBY. (Finally all that aggravation pays off!) You can either upgrade the secondary server in place or rebuild it. A secondary database doesn't actually get upgraded until you recover it so the log sequence chain is not broken and you can continue shipping from the primary. Just remember that it can take quite some time to upgrade a database so you need to factor that into the expectations you give people about how long it will take to fail over. For more details, check this out: http://msdn.microsoft.com/en-us/library/cc645954(SQL.105).aspx

    Read the article

  • CodePlex Daily Summary for Wednesday, January 12, 2011

    CodePlex Daily Summary for Wednesday, January 12, 2011Popular ReleasesGoogle URL Shortener API for .NET: Google URL Shortener API v1: According follow specification: http://code.google.com/apis/urlshortener/v1/reference.htmljGestures: a jQuery plugin for gesture events: 0.81: added event substitution for IE updated index.htmlStyleCop for ReSharper: StyleCop for ReSharper 5.1.14986.000: A considerable amount of work has gone into this release: Features: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new ObjectBasedEnvironment object does not resolve the StyleCop installation path, thus it does not return the ...SQL Monitor - tracking sql server activities: SQL Monitor 3.1 beta 1: 1. support alert message template 2. dynamic toolbar commands depending on functionality 3. fixed some bugs 4. refactored part of the code, now more stable and more clean upFacebook C# SDK: 4.2.1: - Authentication bug fixes - Updated Json.Net to version 4.0.0 - BREAKING CHANGE: Removed cookieSupport config setting, now automatic. This download is also availible on NuGet: Facebook FacebookWeb FacebookWebMvcUmbraco CMS: Umbraco 4.6: The Umbraco 4.6 (codename JUNO) release contains many new features focusing on an improved installation experience, a number of robust developer features, and contains nearly 200 bug fixes since the 4.5.2 release. Improved installer experience Updated Starter Kits (Simple, Blog, Personal, Business) Beautiful, free, customizable skins included Skinning engine and Skin customization (see Skinning Documentation Kit) Default dashboards on install with hide option Updated Login timeout ...ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OpenStreetMap 1.1 beta2: This is the beta2 release for the ArcGIS Editor for OpenStreetMap version 1.1. Changes from version 1.0: Multi-part geometries are now supported. Homogeneous relations (consisting of only lines or only polygons) are converted into the appropriate multi-part geometry. Mixed relations and super relations are maintained and tracked in a stand-alone relation table. The underlying editing logic has changed. As opposed to tracking the editing changes upon "Save edit" or "Stop edit" the changes a...Hawkeye - The .Net Runtime Object Editor: Hawkeye 1.2.5: In the case you are running an x86 Windows and you installed Release 1.2.4, you should consider upgrading to this release (1.2.5) as it appears Hawkeye is broken on x86 OS. I apologize for the inconvenience, but it appears Hawkeye 1.2.4 (and probably previous versions) doesn't run on x86 Windows (See issue http://hawkeye.codeplex.com/workitem/7791). This maintenance release fixes this broken behavior. This release comes in two flavors: Hawkeye.125.N2 is the standard .NET 2 build, was compile...Phalanger - The PHP Language Compiler for the .NET Framework: 2.0 (January 2011): Another release build for daily use; it contains many new features, enhanced compatibility with latest PHP opensource applications and several issue fixes. To improve the performance of your application using MySQL, please use Managed MySQL Extension for Phalanger. Changes made within this release include following: New features available only in Phalanger. Full support of Multi-Script-Assemblies was implemented; you can build your application into several DLLs now. Deploy them separately t...EnhSim: EnhSim 2.3.0: 2.3.0This release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Changed how flame shoc...AutoLoL: AutoLoL v1.5.3: A message will be displayed when there's an update available Shows a list of recent mastery files in the Editor Tab (requested by quite a few people) Updater: Update information is now scrollable Added a buton to launch AutoLoL after updating is finished Updated the UI to match that of AutoLoL Fix: Detects and resolves 'Read Only' state on Version.xmlTweetSharp: TweetSharp v2.0.0.0 - Preview 7: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 7 ChangesFixes the regression issue in OAuth from Preview 6 Preview 6 ChangesMaintenance release with user reported fixes Preview 5 ChangesMaintenance release with user reported fixes Third Party Library VersionsHammock v1.0.6: http://hammock.codeplex.com Json.NET 3.5 Release 8: http://json.codeplex.comExtended WPF Toolkit: Extended WPF Toolkit - 1.3.0: What's in the 1.3.0 Release?BusyIndicator ButtonSpinner ChildWindow ColorPicker - Updated (Breaking Changes) DateTimeUpDown - New Control Magnifier - New Control MaskedTextBox - New Control MessageBox NumericUpDown RichTextBox RichTextBoxFormatBar - Updated .NET 3.5 binaries and SourcePlease note: The Extended WPF Toolkit 3.5 is dependent on .NET Framework 3.5 and the WPFToolkit. You must install .NET Framework 3.5 and the WPFToolkit in order to use any features in the To...sNPCedit: sNPCedit v0.9d: added elementclient coordinate catcher to catch coordinates select a target (ingame) i.e. your char, npc or monster than click the button and coordinates+direction will be transfered to the selected row in the table corrected labels from Rot to Direction (because it is a vector)Ionics Isapi Rewrite Filter: 2.1 latest stable: V2.1 is stable, and is in maintenance mode. This is v2.1.1.25. It is a bug-fix release. There are no new features. 28629 29172 28722 27626 28074 29164 27659 27900 many documentation updates and fixes proper x64 build environment. This release includes x64 binaries in zip form, but no x64 MSI file. You'll have to manually install x64 servers, following the instructions in the documentation.VivoSocial: VivoSocial 7.4.1: New release with bug fixes and updates for performance.UltimateJB: Ultimate JB 2.03 PL3 KAKAROTO + HERMES + Spoof 3.5: Voici une version attendu avec impatience pour beaucoup : - La version PL3 KAKAROTO intégre ses dernières modification et intégre maintenant le firmware 2.43 !!! Conclusion : - UltimateJB203PSXXXDEFAULTKAKAROTO=> Pas de spoof mais disponible pour les PS3 suivantes : 3.41_kiosk 3.41 3.40 3.30 3.21 3.15 3.10 3.01 2.76 2.70 2.60 2.53 2.43 - UltimateJB203PS341_HERMES => Pas de spoof mais version hermes 4b - UltimateJB203PS341HERMESSPOOF35X => hermes 4b + spoof des firmwares 3.50 et 3.55 au li....NET Extensions - Extension Methods Library for C# and VB.NET: Release 2011.03: Added lot's of new extensions and new projects for MVC and Entity Framework. object.FindTypeByRecursion Int32.InRange String.RemoveAllSpecialCharacters String.IsEmptyOrWhiteSpace String.IsNotEmptyOrWhiteSpace String.IfEmptyOrWhiteSpace String.ToUpperFirstLetter String.GetBytes String.ToTitleCase String.ToPlural DateTime.GetDaysInYear DateTime.GetPeriodOfDay IEnumberable.RemoveAll IEnumberable.Distinct ICollection.RemoveAll IList.Join IList.Match IList.Cast Array.IsNullOrEmpty Array.W...EFMVC - ASP.NET MVC 3 and EF Code First: EFMVC 0.5- ASP.NET MVC 3 and EF Code First: Demo web app ASP.NET MVC 3, Razor and EF Code FirstVidCoder: 0.8.0: Added x64 version. Made the audio output preview more detailed and accurate. If the chosen encoder or mixdown is incompatible with the source, the fallback that will be used is displayed. Added "Auto" to the audio mixdown choices. Reworked non-anamorphic size calculation to work better with non-standard pixel aspect ratios and cropping. Reworked Custom anamorphic to be more intuitive and allow display width to be set automatically (Thanks, Statick). Allowing higher bitrates for 6-ch...New ProjectsASP.NET MVC Scaffolding: Scaffolding package for ASP.NETAstor: OData Explorer: OData ExplorerBasic Users Community: A simple user community with threads and posts.Bukkit Server Manager: BSM makes server managing easy we have multiple type and database support including: MySql, SQLite types: VPS, Dedicated, Home PCCh4CP: Chamber 4 control programDotNetNuke Telerik Library: A set of Telerik wrappers for DotNetNuke module developers to utilize which aren't yet included as of 5.6.1. Eventually this will be offloaded to the core. Enjoy Life: our fypFolderSizeChecker: It suppose to check the size of big folders in specific partition and help user to find the most disk usage location. (It's simple project so please don't expect big and complex algorithms)HomeTeamOnline: This is project of HomeTeamOnlineICSWorld: This is project of ICSWorldIMAP Client for .NET 4.0 using LumiSoft: Develop an IMAP client using this sample project based on the LumiSoft .NET open source project. This project compiles in .NET 4.0 and demonstrates how to pull email using IMAP. The purpose of the project is for email auto processing.MUIExt (Multilingual User Interface Extender): MUIExt makes it easier for SharePoint 2010 users to create multilingual sites. You'll no longer have to live with the MUI limitations or have to manage variations. It's developed in csharp.Phoenix Service Bus: The goal of this pServiceBus is to provide an API and Service Components that would make implementing an ESB Infrastructure in your environment. It's developed in C#, and also have API written for Javascript Clients PhotoSnapper: Home project just to rename photos or .mov files in a folder starting from from a user defined number.redditfier: A windows application to notify redditors with new posts.SharePoint Field Updater: Automatically update sub fields according to a lookup field. For example: Updating field "Contact" will automatically put "Contact Email" and "Address" in the appropriate text fields.TXLCMS: emptyUmbraco Spark engine: Spark macro engine for UmbracoUrdu Translation: Urdu Translation Project WFTestDesign: BizUnit WF is based on BizUnit solution that allows user to define a test using WorkFlow UI, custom activities designed in this extension and general Workflow activities.It's enable also to use breakpoint in test. It's developed in C#.WPF Date Range Slider: A WPF Date Range Slider user control written with C# to allow your users to choose a range of dates using a double thumbed slider control.WPMind Framework for WP7: This project is used to provide some Windows Phone 7 controls for Windows Phone 7 Silverlight developer. Please join us if you are interested in this project.

    Read the article

  • Ubuntu 13.04 running really slow and Hanging

    - by CAM
    Up till recently I have been running 13.04 on my laptop very happily. This morning however, I turned on my laptop to find it running really slow. Takes 5 min to load a program and even then the program freezes and I have had 3 system hangs this morning already. The Unity Desktop appears to run ok but programs do not. Things I have tried so far: Checking for Propitiatory graphics drivers - none shown available (I have bumblebee running already). Using the recovery boot options from Grub to repair broken packages. Recent changes - Updated computer, Installed some indicator applets which have worked fine for me before. System Specs: Asus U36s, Intel Core i5-2450M 2.5GHz, 4GB RAM, Nvidia Geforce 610M-1GB, Dual boot Win7 & Ubuntu 13.04 I'm a bit of a noob with Ubuntu but am happy enough running stuff in terminal if you will advise me on what to run. I'm just a bit stuck on what do to fix this without a reinstall. Thanks a lot for your help.

    Read the article

  • Getting WCF Services in a Silverlight solution to play nice on deployment

    - by brendonpage
    I have come across 2 issues with deploying WCF services in a Silverlight solution, admittedly the one is more of a hiccup, and only occurs if you take the easy way out and reference your services through visual studio. The First Issue This occurs when you deploy your WFC services to an IIS server. When browse to the services using your web browser, you are greeted with “This collection already contains an address with scheme http.  There can be at most one address per scheme in this collection.”. When you make a call to this service from your Silverlight application, you get the extremely helpful “NotFound” error, this error message can be found in the error property of the event arguments on the complete event handler for that call. As it did with me this will leave most people scratching their head, because the very same services work just fine on the ASP.NET Development Web Server and on my local IIS server. Now I’m no server/hosting/IIS expert so I did a bit of searching when I first encountered this issue. I found out this happens because IIS supports multiple address bindings per protocol (http/https/ftp … etc) per web site, but WCF only supports binding to one address per protocol. This causes a problem when the WCF service is hosted on a site with multiple address bindings, because IIS provides all of the bindings to the host factory when running the service. While this problem occurs mainly on shared hosting solutions, it is not limited to shared hosting, it just seems like all shared hosting providers setup sites on their servers with multiple address bindings. For interests sake I added functionality to the example project attached to this post to dump the addresses given to the WCF service by IIS into a log file. This was the output on the shared hosting solution I use: http://mydomain.co.za/Services/TestService.svc http://www.mydomain.co.za/Services/TestService.svc http://mydomain-co-za.win13.wadns.net/Services/TestService.svc http://win13/Services/TestService.svc As you can see all these addresses are for the http protocol, which is where it all goes wrong for WCF. Fixes for the First Issue There are a few ways to get around this. The first being the easiest, target .NET 4! Yes that's right in .NET 4 WCF services support multiple addresses per protocol. This functionality is enabled by an option, which is on by default if you create a new project, you will need to turn on if you are upgrading to .NET 4. To do this set the multipleSiteBindingsEnabled property of the serviceHostingEnviroment tag in the web.config file to true, as shown below: <system.serviceModel>     <serviceHostingEnvironment multipleSiteBindingsEnabled="true" /> </system.serviceModel> Beware this ONLY works in .NET 4, so if you don’t have a server with .NET 4 installed on that you can deploy to, you will need to employ one of the other work a rounds. The second option will work for .NET 3.5 & 4. For this option all you need to do is modify the web.config file and add baseAddressPrefixFilters to the serviceHostingEnviroment tag as shown below: <system.serviceModel>     <serviceHostingEnvironment>         <baseAddressPrefixFilters>              <add prefix="http://www.mydomain.co.za"/>         </baseAddressPrefixFilters>     </serviceHostingEnvironment> </system.serviceModel> These will be used to filter the list of base addresses that IIS provides to the host factory. When specifying these prefix filters be sure to specify filters which will only allow 1 result through, otherwise the entire exercise will be pointless. There is however a problem with this work a round, you are only allowed to specify 1 prefix filter per protocol. Which means you can’t add filters for all your environments, this will therefore add to the list of things to do before deploying or switching dev machines. The third option is the one I currently employ, it will work for .NET 3, 3.5 & 4, although it is not needed for .NET 4. For this option you create a custom host factory which inherits from the ServiceHostFactory class. In the implementation of the ServiceHostFactory you employ logic to figure out which of the base addresses, that are give by IIS, to use when creating the service host. The logic you use to do this is completely up to you, I have seen quite a few solutions that simply statically reference an index from the list of base addresses, this works for most situations but falls short in others. For instance, if the order of the base addresses where to change, it might end up returning an address that only resolves on the servers local network, like the last one in the example I gave at the beginning. Another instance, if a request comes in on a different protocol, like https, you will be creating the service host using an address which is on the incorrect protocol, like http. To reliably find the correct address to use, I use the address that the service was requested on. To accomplish this I use the HttpContext, which requires the service to operate with AspNetCompatibilityRequirements set on. If for some reason running you services with AspNetCompatibilityRequirements on isn’t an option, you can still use this method, you will just have to come up with your own logic for selecting the correct address. First you will need to enable AspNetCompatibilityRequirements for your hosting environment, to do this you will need to set it to true in the web.config file as shown below: <system.serviceModel>     <serviceHostingEnvironment AspNetCompatibilityRequirements="true" /> </system.serviceModel> You will then need to mark any services that are going to use the custom host factory, to allow AspNetCompatibilityRequirements, as shown below: [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class TestService { } Now for the custom host factory, this is where the logic lives that selects the correct address to create service host with. The one i use is shown below: public class CustomHostFactory : ServiceHostFactory { protected override ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) { // // Compose a prefix filter based on the requested uri // string prefixFilter = HttpContext.Current.Request.Url.Scheme + "://" + HttpContext.Current.Request.Url.DnsSafeHost; if (!HttpContext.Current.Request.Url.IsDefaultPort) { prefixFilter += ":" + HttpContext.Current.Request.Url.Port.ToString() + "/"; } // // Find a base address that matches the prefix filter // foreach (Uri baseAddress in baseAddresses) { if (baseAddress.OriginalString.StartsWith(prefixFilter)) { return new ServiceHost(serviceType, baseAddress); } } // // Throw exception if no matching base address was found // throw new Exception("Custom Host Factory: No base address matching '" + prefixFilter + "' was found."); } } The most important line in the custom host factory is the one that returns a new service host. This has to return a service host that specifies only one base address per protocol. Since I filter by the address the request came on in, I only need to create the service host with one address, since this address will always be of the correct protocol. Now you have a custom host factory you have to tell your services to use it. To do this you view the markup of the service by right clicking on it in the solution explorer and choosing “View Markup”. Then you add/set the value of the Factory property to the full namespace path of you custom host factory, as shown below. And that is it done, the service will now use the specified custom host factory. The Second Issue As I mentioned earlier this issue is more of a hiccup, but I thought worthy of a mention so I included it. This issue only occurs when you add a service reference to a Silverlight project. Visual Studio will generate a lot of code for you, part of that generated code is the ServiceReferences.ClientConfig file. This file stores the endpoint configuration that is used when accessing your services using the generated proxy classes. Here is what that file looks like: <configuration>     <system.serviceModel>         <bindings>             <customBinding>                 <binding name="CustomBinding_TestService">                     <binaryMessageEncoding />                     <httpTransport maxReceivedMessageSize="2147483647" maxBufferSize="2147483647" />                 </binding>                 <binding name="CustomBinding_BrokenService">                     <binaryMessageEncoding />                     <httpTransport maxReceivedMessageSize="2147483647" maxBufferSize="2147483647" />                 </binding>             </customBinding>         </bindings>         <client>             <endpoint address="http://localhost:49347/services/TestService.svc"                 binding="customBinding" bindingConfiguration="CustomBinding_TestService"                 contract="TestService.TestService" name="CustomBinding_TestService" />             <endpoint address="http://localhost:49347/Services/BrokenService.svc"                 binding="customBinding" bindingConfiguration="CustomBinding_BrokenService"                 contract="BrokenService.BrokenService" name="CustomBinding_BrokenService" />         </client>     </system.serviceModel> </configuration> As you will notice the addresses for the end points are set to the addresses of the services you added the service references from, so unless you are adding the service references from your live services, you will have to change these addresses before you deploy. This is little more than an annoyance really, but it adds to the list of things to do before you can deploy, and if left unchecked that list can get out of control. Fix for the Second Issue The way you would usually access a service added this way is to create an instance of the proxy class like so: BrokenServiceClient proxy = new BrokenServiceClient(); Closer inspection of these generated proxy classes reveals that there are a few overloaded constructors, one of which allows you to specify the end point address to use when creating the proxy. From here all you have to do is come up with some logic that will provide you with the relative path to your services. Since my WCF services are usually hosted in the same project as my Silverlight app I use the class shown below: public class ServiceProxyHelper { /// <summary> /// Create a broken service proxy /// </summary> /// <returns>A broken service proxy</returns> public static BrokenServiceClient CreateBrokenServiceProxy() { Uri address = new Uri(Application.Current.Host.Source, "../Services/BrokenService.svc"); return new BrokenServiceClient("CustomBinding_BrokenService", address.AbsoluteUri); } } Then I will create an instance of the proxy class using my service helper class like so: BrokenServiceClient proxy = ServiceProxyHelper.CreateBrokenServiceProxy(); The way this works is “Application.Current.Host.Source” will return the URL to the ClientBin folder the Silverlight app is hosted in, the “../Services/BrokenService.svc” is then used as the relative path to the service from the ClientBin folder, combined by the Uri object this gives me the URL to my service. The “CustomBinding_BrokenService” is a reference to the end point configuration in the ServiceReferences.ClientConfig file. Yes this means you still need the ServiceReferences.ClientConfig file. All this is doing is using a different end point address than the one specified in the ServiceReferences.ClientConfig file, all the other settings form the ServiceReferences.ClientConfig file are still used when creating the proxy. I have uploaded an example project which covers the custom host factory solution from the first issue and everything from the second issue. I included the code to write a list of base addresses to a log file in my implementation of the custom host factory, this is not need for the custom host factory to function and can safely be removed. Download (WCFServicesDeploymentExample.zip)

    Read the article

  • Little PM side post...

    - by edgaralgernon
    When adding new team memebers... off set the ramp up time by 1) having pre built machines ready and and easy method of getting the lastest tools, code base etc. I'm fortunate enough to be at a client that has a machine ready built and loaded when the dev arrives, all they have to do is grab the code. 2) have tasks broken down so that dependencies are as minimal as possible. In other words, to over come the mythical man month issue (as recently mentioned on slashdot) make sure the tasks you hand out have few dependencies on each other. That way the new dev is able to be productive fairly quickly. Here's our historical lead time... the bump in Jan is due to added work, by 2/18 we had added 4 new people over the last two weeks. And amazing the time starts coming down: Here's our averag work time: again time ramps up as we are adding more tasks, but then starts inching back down through out Feb and March. It's not that we beat the Mythical Man Month, and in fact I still believe the book and idea are highly relevant. But if you can break the tasks down and reduce the dependencies between the task then you can mitigate the effect. The tool used in this case is from AgileZen.com and some of the wild swings are due to inexperience with the system initially... but our average times as measured by the tool are matching real life. Also the tool appearst to measure in 24 hour days and 7 day weeks. so it isn't as bad as it looks. :-)

    Read the article

  • SQLAuthority News – 2 Security Updates for SQL Server 2000 SP 4 Users

    - by pinaldave
    If you are using SQL Server 2000 still today my very first recommendation to you is to upgrade to SQL Server 2012. SQL Server 2000 is now 12 years old product and since then many new enhancements as well features which are relevant to current growth and progress in Informational Industry. Now is the time to catch up with the latest trends. Here is one more point for you to notice if this helps you consider to upgrade to the latest version. One can’t upgrade directly from SQL Server 2000 to SQL Server 2012. You need to first upgrade to either SQL Server 2005/2008/R2 and then further plan to upgrade to SQL Server 2012. There is no direct upgrade path for SQL Server 2000 to SQL Server 2012. I strongly believe this is the time to upgrade to the latest version. Well, also there is a rule that to let something continue if it is not broken and working fine. If you are following that rule and still using SQL Server 2000 I strongly suggest that you upgrade your SQL Server 2000 SP4 and update it with latest Security updates. Here are two important SQL Server Security Updates. Security Update for SQL Server 2000 Service Pack 4 (KB983811) Security Update for SQL Server 2000 Service Pack 4 (KB983812) As we are talking about SQL Server 2000 let me ask you a quick question – how many of you are still using SQL Server 2000 or earlier version in a production system on at least one server? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Download, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Miami 311: Built on Windows Azure

    - by Josh Holmes
    This is a cool use of Azure. The city of Miami tool their “311” data around potholes, trash pickup issues, recycling issues, broken sidewalks and the like and put that data in Azure. The next step is that they leveraged Bing Maps and Silverlight to visualize those issues spread on a map of the city. The solution takes advantage of virtually unlimited storage and processing power, provides the ability to quickly address service requests and implement updates even during peak times such as hurricane season. If things change, the City can bring the solution on site or move to a physical facility, all based on  need and cost-effectiveness. As a result, residents logging on to Miami 311 can see on average 4,500 issues in progress - not represented as a ‘list', but located on a map in relation to other projects in their neighborhood .  A simple click on the map allows them to easily drill down to more and more specific details if they want. In short, they have turned what used to be represented by a meaningless list of data into useful information, and created  actionable and consumable knowledge that is relevant to the citizens of Miami. For Miami, their ‘service call to the city' becomes an interactive process they can follow - and the City has a new tool to manage and deliver outcomes. … When the city made the move to the web, they chose tools they knew and software they trust. The Microsoft Windows Azure cloud platform made it easy to do, and they used both Bing mapping and Silverlight to build a user friendly front end. According to Port25 (Miami 311: Built on Windows Azure - Port 25: The Open Source Community at Microsoft), it took two people 8 days to implement the whole system and they are going to open source their solution so that other cities can leverage it. I haven’t seen yet where and how they are going to release it but I’ll keep you posted if I find out.

    Read the article

  • How do I get KLIPS or NETKEY on 11.10 server?

    - by Incognito
    I'm attempting to run OpenSWAN on my Ubuntu11.10 server. All I've done so far is install openswan from the package manager and attempt to set up conf files. However, IPSec support seems to be broken, thus OpenSWAN can't do it's thing. Attempt to start IPSec $ sudo ipsec setup --start ipsec_setup: Starting Openswan IPsec 2.6.28... ipsec_setup: No KLIPS support found while requested, desperately falling back to netkey ipsec_setup: Even NETKEY support is not there, aborting Verify IPSec $ sudo ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.28/K(no kernel code presently loaded) Checking for IPsec support in kernel [FAILED] Checking that pluto is running [FAILED] whack: Pluto is not running (no "/var/run/pluto/pluto.ctl") Checking for 'ip' command [OK] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] IPSec Version $ sudo ipsec version Linux Openswan U2.6.28/K(no kernel code presently loaded) See `ipsec --copyright' for copyright information. Linux build: $ uname -a Linux metabox 2.6.18-028stab092.1 #1 SMP Wed Jul 20 19:47:12 MSD 2011 x86_64 x86_64 x86_64 GNU/Linux How can I go about correcting this problem with IPSec? This is a hosted VPS, and I'd like to avoid a kernel rebuild if I can find some other alternative.

    Read the article

  • Java-JDBC-MySQL Error

    - by LeonardPeris
    I'm trying to get my java program to talk to a MySQL DB. So i did some reading and downloaded MySQL Connector/J. I've extracted it into my home directory ~. Here are the contents. user@hamster:~$ ls LoadDriver.class LoadDriver.java mysql-connector-java-5.1.18-bin.jar The contents of LoadDriver.java are user@hamster:~$ cat LoadDriver.java import java.sql.Connection; import java.sql.DriverManager; import java.sql.SQLException; // Notice, do not import com.mysql.jdbc.* // or you will have problems! public class LoadDriver { public static void main(String[] args) { try { // The newInstance() call is a work around for some // broken Java implementations Class.forName("com.mysql.jdbc.Driver").newInstance(); } catch (Exception ex) { System.out.println(ex); } } } The contents are the same from http://dev.mysql.com/doc/refman/5.1/en/connector-j-usagenotes-basic.html#connector-j-usagenotes-connect-drivermanager with the only change that the Exception is being printed to console in the catch block. I compile it as follows leonard@hamster:~$ javac LoadDriver.java When I try to execute it, the following is the ouput. leonard@hamster:~$ java LoadDriver java.lang.ClassNotFoundException: com.mysql.jdbc.Driver This output is consistent with the executing command, but when trying to run it with the prescribed CLASSPATH method I run into the following issue. leonard@hamster:~$ java -cp /home/leonard/mysql-connector-java-5.1.18-bin.jar LoadDriver Exception in thread "main" java.lang.NoClassDefFoundError: LoadDriver Caused by: java.lang.ClassNotFoundException: LoadDriver at java.net.URLClassLoader$1.run(URLClassLoader.java:217) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:205) at java.lang.ClassLoader.loadClass(ClassLoader.java:321) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:294) at java.lang.ClassLoader.loadClass(ClassLoader.java:266) Could not find the main class: LoadDriver. Program will exit. Am I missing something? How do I get MySQL's own code samples running.

    Read the article

  • How do I set up pairing email addresses?

    - by James A. Rosen
    Our team uses the Ruby gem hitch to manage pairing. You set it up with a group email address (e.g. [email protected]) and then tell it who is pairing: $ hitch james tiffany Hitch then sets your Git author configuration so that our commits look like commit 629dbd4739eaa91a720dd432c7a8e6e1a511cb2d Author: James and Tiffany <[email protected]> Date: Thu Oct 31 13:59:05 2013 -0700 Unfortunately, we've only been able to come up with two options: [email protected] doesn't exist. The downside is that if Travis CI tries to notify us that we broke the build, we don't see it. [email protected] does exist and forwards to all the developers. Now the downside is that everyone gets spammed with every broken build by every pair. We have too many possible pair to do any of the following: set up actual [email protected] email addresses or groups (n^2 email addresses) set up forwarding rules for [email protected] (n^2 forwarding rules) set up forwarding rules for [email protected] (n forwarding rules for each of n developers) Does anyone have a system that works for them?

    Read the article

  • Nautilus crashes after Ubuntu Tweak Package Cleaner [fixed]

    - by Ka7anax
    Few days ago I started having some problems with nautilus. Basically when I'm trying to get into a folder it crashes. It's not happening all the time, but in 85% it does... Sometimes, after the crash all my desktop icons are also gone. The only thing that I think causes this is Ubuntu Tweak - I'm not sure, but the issues started after I did the Package cleaner from Ubuntu Tweaks... Any ideas? ------- EDIT 2 - IMPORTANT !!! ---------- It seems I fixed this problem doing these: 1) I uninstall this nautilus script - http://mundogeek.net/nautilus-scripts/#nautilus-send-gmail 2) I installed nautilus elementary So far is back to normal... If anything bad happens again I will come back! -------- EDIT 1 ---------- First time, after running the command (nautilus --quit; nautilus --no-desktop) 3 times all the system crashed (except the mouse, I could move the mouse). After restart I run it and obtain this: ----- Initializing nautilus-gdu extension Initializing nautilus-dropbox 0.6.7 (nautilus:2966): GConf-CRITICAL **: gconf_value_free: assertion value != NULL' failed (nautilus:2966): GConf-CRITICAL **: gconf_value_free: assertionvalue != NULL' failed Nautilus-Share-Message: Called "net usershare info" but it failed: 'net usershare' returned error 255: net usershare: cannot open usershare directory /var/lib/samba/usershares. Error No such file or directory Please ask your system administrator to enable user sharing. and then this: cristi@cris-laptop:~$ nautilus --quit; nautilus --no-desktop (nautilus:3810): Unique-DBus-WARNING **: Error while sending message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

    Read the article

  • Why Standards Only Get You So Far

    - by Tim Murphy
    Over the years I have been exposed to a number of standards.  EDI was the first.  More recently it has been the CIECA standard for Insurance and now the embattled document standards of Open XML and ODF. Standards actually came up at the last CAG meeting.  The debate was over how effective they really are.  Even back in the late 80’s to early 90’s people found they had to customize these standards to get any work done.  I even had one vendor about a year ago tell me that they really weren’t standards, they were more of a guideline. The problem is that standards are created either by committee or by companies trying to sell a product.  They never fit all situations.  This is why most of them leave extension points in their definition.  Of course if you use those extension points everyone has to have custom code to know how to consume the new product. Standards increase reliability but they stifle innovation and slow the time to market cycle of products.  In this age of ever shortening windows of opportunity that could mean that a company could lose its competitive advantage. I believe that standards are not only good, but essential.  I also believe that they are not a silver bullet.  People who turn competing standards into a type of holy war are really missing the point.  I think we should make the best standards we can, whether that is for a product so that customers can use API, or by committee so that they cross products.  But they also need to be as feature rich and flexible as possible.  They can’t be just the lowest common denominator since this type of standard will be broken the day it is published.  In the end though, it is the market will vote with their dollars. del.icio.us Tags: Office Open XML,ODF,Standards,EDI

    Read the article

  • How Can I Install LibreOffice Base?

    - by Rob
    Useful info: I have tried running sudo dpkg --configure -a and sudo apt-get install -f with no result. I am running Kubuntu 11.10 (the updater is far too unreliable to ever be trusted with performing a version upgrade) The rest of LibreOffice seems to work fine (apart from an annoying bug where tooltips are shown as black text on black background...) I have need to use LibreOffice Base to complete a mail merge document. However, I noticed it's not installed. When I go to install it however... rob@hydrogen:~$ sudo apt-get install libreoffice-base [sudo] password for rob: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies. libreoffice-base : Depends: libreoffice-core (= 1:3.4.4-0ubuntu1) but it is not going to be installed Depends: libreoffice-base-core (= 1:3.4.4-0ubuntu1) but it is not going to be installed Depends: libreoffice-java-common (>= 1:3.4.4~) but it is not going to be installed Suggests: libmyodbc but it is not going to be installed or odbc-postgresql but it is not going to be installed or libsqliteodbc but it is not going to be installed or tdsodbc but it is not going to be installed or mdbtools but it is not going to be installed Suggests: libreoffice-gcj but it is not installable Suggests: libreoffice-report-builder but it is not going to be installed E: Unable to correct problems, you have held broken packages. I'm bemused as to which packages it seems to think I have held. As far as I'm aware, Kubuntu doesn't give you the option to hold packages... So, how do I get out of this dependency hell?

    Read the article

  • TFS 2010–Bridging the gap between developers and testers

    - by guybarrette
    Last fall, the Montreal .NET Community presented a full day on ALM with a session called “Bridging the gap between developers and testers”. It was a huge success. TFS experts Etienne Tremblay and Vincent Grondin presented again this session at the Ottawa user group in January and this time, the event was recorded by DevTeach in collaboration with Microsoft.  This 7 hours training is broken in 13 videos that you can watch online for free on the DevTeach Website.  If you’re interested in TFS, how to migrate from VSS, the TFS testing tools, how to set the TFS testing lab, how to test a UI and how to automate the tests, this is a must see series.   Here’s the segments list: Intro Migrating from VSS to TFS Automating the build Where’s our backlog? Adding a tester to the team Tester at work Bridging the gap Stop, we have a problem! Let’s get back on track Multi-environment testing Testing in the lab UI Automation Validating UI automation Look boss, no hands! http://www.devteach.com/ALM-TFS2010-Bridgingthegap.aspx var addthis_pub="guybarrette";

    Read the article

  • How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk

    - by The Geek
    We’ve covered loads of different anti-virus, Linux, and other boot disks that help you repair or recover your system, but why limit yourself to just one? Here’s how to combine your favorite repair disks together to create the ultimate repair toolkit for broken Windows systems—all on a single flash drive. The ones we’ve covered already? Here’s a quick list of all the ways you can recover your system with a rescue disk: How to Use the Avira Rescue CD to Clean Your Infected PC How to Use the BitDefender Rescue CD to Clean Your Infected PC How to Use the Kaspersky Rescue Disk to Clean Your Infected PC Change or Reset Windows Password from a Ubuntu Live CD The 10 Cleverest Ways to Use Linux to Fix Your Windows PC Change Your Forgotten Windows Password with the Linux System Rescue CD Use Ubuntu Live CD to Backup Files from Your Dead Windows Computer If you need to clean up an infected system, we’d absolutely recommend the BitDefender CD, since it’s auto-updating. Best bet? Create your ultimate boot disk with as many of the different utilities as your flash drive can hold Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC Luigi Installs Any OS on Google’s Cr-48 Notebook DIY iPad Stylus Offers Pen-Based Interaction on the Cheap Serene Blue Ubuntu Wallpaper for Your Desktop Enjoy Old School Style Video Game Fun with Chicken Invaders Hide the Twitter “Litter” in Twitter’s Sidebar Area (Chrome and Iron) Public Domain Day: Reflections on Copyright and the Importance of Public Domain

    Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >