Search Results

Search found 2970 results on 119 pages for 'implicit typing'.

Page 91/119 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• Macbook Pro 2010 Ethernet Jumbo Frame(9k MTU) Support?

  - by Troggy

  Has anyone been able to use jumbo frame support on their 2010 Macbook Pros? This is kind of negative news here, but I am seeing many reports that this is not available anymore due to Apple's choice of network card in the new machines. I cannot set my MTU speed over 1500 on my new 2010 MBP i7, but my old early 2008 MBP (Core2) has the 9000 MTU setting for use. Everything I have is setup to use jumbo frames and I thought apple kept that feature in their "pro" lineup. It sounds like the Mac Pro still has it. Did they decide to use a chipset that doesn't support it? I am trying to pinpoint some solid chipset numbers and the feature support. Maybe they just need to update the drivers? Is there some more official information about this feature? This might seem minor, but this is really frustrating if apple removed this feature from their pro laptop line. From what I have read so far, it sounds like I am not alone in my frustrations with this. http://discussions.info.apple.com/message.jspa?messageID=12258067 http://discussions.apple.com/thread.jspa?messageID=12130158 Anyone have any experience or further knowledge about this issue ... beyond typing my question into google and giving the top 5 results as answers? :)

  Read the article

• Writing a script for ash?

  - by rumtscho

  My VPN is behaving funny sometimes, and I have to restart it often. I wanted to write a script which does that for me. It doesn't have to be anything fancy, just a shortcut for the commands I have to type into the terminal. More specifically: it will look at the running processes. If it finds a running vpnc process, it will kill it. Then it will start vpnc. I've written bash scripts of similar complexity, but now I don't have a bash, only an ash. Until now, the only difference I noticed is that there are much less commands available, but then, I don't use it very often. So I have some questions. Is writing ash scripts different than writing bash scripts? Is there something specific to consider when doing it? When the script is ready, how can I deploy it? For bash, I just put the executable file under /usr/lib and run it by typing the file name into the command line, will this work with ash? Are there any special pitfalls to watch out for in the script I want to write? I think that the killing process part may get hairy, if I write something that kills the wrong process, but even then running the script shouldn't break anything permanently, right?

  Read the article

• Don't let the mouse wake up displays from standby

  - by progo

  I like to put my displays to powersave/standby mode when I leave the computer for a while. It would be ok if it weren't for oversensitive mouse. Sometimes the driver reads in some movement that's not visible to the naked eye (the cursor, that is) and it breaks the power save. It would wait for another 10 minutes before going back to its standby. My workaround is the following script bound to C-S-q: xlock -startCmd 'xset dpms 2 2 2' -endCmd 'xset dpms 600 1200 1300' -mode blank -echokeys -timeelapsed +usefirst By using xset I set the values to 2 seconds each before going to standby. It's not nice, anyway. Sometimes there are cool fortunes that I want to read before typing in the password. I could keep the cursor moving but it's cludgy. (By the way, xlock's option mousemotion doesn't help -- it just hides the cursor but the displays fire up nevertheless.) So the question: is there a way to make displays go standby and stay there until a keyboard key is pressed? I'm running gentoo and recent Xorg, but I hope the answer doesn't have to be distro-specific. Basically the answer can be as simple as how to enable/disable mouse within command line? It think that would do the job if DPMS doesn't know the idea.

  Read the article

• P2v options within a hyper-v environment.

  - by tony roth

  I have a server that san boots that I want to p2v. I have many options disk2vhd, scvmm etc but I was thinking about cloning the lun (flexclone, netapp) presenting it to my hyper-v r2 server. Within the hv manager do a create new disk then have it copy the cloned lun to a vhd file. Then do the bcdedit\bootsect stuff to it. Should work right? I'm also curious if anybodys booting vhd's that are on bootable luns? I've booted native vhd's just fine was just curious about the running them off a bootable lun. I think that this has quite a few advantages like instant p2v etc.. any thoughts on this? hmm dang as I was typing this I realized that I should not use the hv manager new disk copy routine, I should just disk2vhd the mounted lun. This has advantages in that it should be a lot faster!! discovered that disk2vhd may be flaky, crashed the first time I ran it! thanks

  Read the article

• How a batch file runs on a remote machine started by PSEXEC

  - by user38780

  I am having an issue running a Batch file on a remote machine suing PSEXEC. The file runs but does not run like it does when run through remote desktop. The batch runs a file which is a 32 bit application, which opens multiple 16bit applications, this should all run under one ntvdm.exe (In one Memory Space). Through remote desktop the batch file runs under the explorer process, and works correctly opening only one ntvdm.exe. Using PSEXEC the batch runs but not under the explorer process, a separate ntvdm.exe is open for each process. I found running the batch from explorer in PSEXEC works, but comes up with a "File Download - Security Warning" eg. psexec.exe" \compname -u username -p passowrd -s -d -i 0 explorer C:\Program.bat I want to be able to run the batch successfully without receiving warnings, it is a local warning and not a network share warning. Possible to recreate warning typing "explorer C:\windows\system32\cmd.exe" in Run I would like to know if anyone knows of a way to get PSEXEC to open the batch file to run as though it was started by explorer. Or a way of removing the local "File Download - Security Warning" Thanks

  Read the article

• SSH garbling characters in vim/nano on remote server

  - by geerlingguy

  ... and it's driving me insane. Basically (this has been happening over the past couple months), I log into a few different CentOS servers (one Linode, another VPS, and a shared host to which I have shell access), running 5.5, 5.7, and 6, from my Mac running OS X Lion, using Terminal. Basically: $ ssh [email protected] [remote-host] $ nano somefile.txt Once I start editing the file, if I use the arrow keys to move around the cursor, or start deleting, then typing again, the cursor jumps around a bit, and if I save the file and reopen it, it's obvious that the cursor was, in fact, jumping all over the place on a line for no apparent reason. I end up getting things like "This is a neof text." When I had typed in (to the cursor-crazy editor) "This is a line of text." It's a big problem when it comes to editing configuration files, because I often have to edit one line, save and close, then reopen just to make sure that line is right... then edit another line... and it's getting quite annoying. I found Linode Lish Shell Vim and Nano rendering troubles: lines not appearing / cursor positions wrong, but I don't know if that relates much, since that's specifically referring to lish.

  Read the article

• How-to filter table filter input to only allow numeric input

  - by frank.nimphius

  In a previous ADF Code Corner post, I explained how to change the table filter behavior by intercepting the query condition in a query filter. See sample #30 at http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html In this OTN Harvest post I explain how to prevent users from providing invalid character entries as table filter criteria to avoid problems upon re-querying the table. In the example shown next, only numeric values are allowed for a table column filter. To create a table that allows data filtering, drag a View Object – or a data collection of a Web Service or JPA business service – from the DataControls panel and drop it as a table. Choose the Enable Filtering option in the Edit Table Columns dialog so the table renders with the column filter boxes displayed. The table filter fields are created using implicit af:inputText components that need to be customized for you to apply a custom filter input component, or to change the input behavior. To change the input filter, so only a defined set of input keys is allowed, you need to change the default filter field with your own af:inputText field to which you apply an af:clientListener tag that filters user keyboard entries. For this, in the Oracle JDeveloper visual editor, select the column which filter you want to change and expand the column node in the Oracle JDeveloper Structure Window. Part of the column definition is the Column facet node. Expand the facets so you see the filter facet entry. The filter facet is grayed out as there is no custom facet defined. In a next step, open theComponent Palette (ctrl+shift+P) and drag an Input Text component onto the facet. This demarks the first part in the filter customization. To make the custom filter component work, you need to map the af:inputText component value property to the ADF filter criteria that is exposed in the Expression Builder. Open the Expression Builder for the filter input component value property by clicking the arrow icon to its right. In the Expression Builder expand the JSP Objects | vs | filterCriteria node to select the attribute name represented by the table column. The vs entry is the name of a variable that is defined on the table and that grants you access to the table attributes. Now that the filter works as before – though using a custom filter input component – you can add the af:clientListener tag to your custom filter component – af:inputText – to call out to JavaScript when users type in the column filter field Point the client filter method property to a JavaScript function that you reference or add through using the af:resource tag and set the type property value to keyDown. <af:document id="d1">     <af:resource type="javascript" source="/js/filterHandler.js"/> … The filter definition looks as shown below <af:inputText label="Label 1" id="it1"                         value="#{vs.filterCriteria.Employe        <af:clientListener method="suppressCharacterInput"                                     type="keyDown"/> </af:inputText> The JavaScript code that you can use to either filter character inputs or numeric inputs is shown below. Just store this code in an external JavaScript (.js) file and reference it from the af:resource tag. //Allow numbers, cursor control keys and delete keys function suppressCharacterInput(evt) {     var _keyCode = evt.getKeyCode();     var _filterField = evt.getCurrentTarget();     var _oldValue = _filterField.getValue();     if (!((_keyCode < 57) ||(_keyCode > 96 && _keyCode < 105))) {         _filterField.setValue(_oldValue);         evt.cancel();     } } //Allow characters, cursor control keys and delete keys function suppressNumericInput(evt) {  var _keyCode = evt.getKeyCode();  var _filterField = evt.getCurrentTarget();  var _oldValue = _filterField.getValue();  //check for numbers  if ((_keyCode < 57 && _keyCode > 47) ||      (_keyCode > 96 && _keyCode < 105)){     _filterField.setValue(_oldValue);     evt.cancel();   } } But what if browsers don't allow JavaScript ? Don't worry about this. If browsers would not support JavaScript then ADF Faces as a whole would not work and you had a different problem.

  Read the article

• What's the best way to telnet from a remote Windows PC without using RDP?

  - by Rob D.

  Three Networks: 10.1.1.0 - Mine 172.1.1.0 - My Branch Office 172.2.2.0 - My Branch Office's VOIP VLAN. My PC is on 10.1.1.0. I need to telnet into a Cisco router on 172.2.2.0. The 10.1.1.0 network has no routes to 172.2.2.0, but a VPN connects 10.1.1.0 to 172.1.1.0. Traffic on 172.1.1.0 can route to 172.2.2.0. All PCs on 172.1.1.0 are running Windows XP. Without disrupting anyone using those PCs, I want to open a telnet session from one of those PCs to the router on 172.2.2.0. I've tried the following: psexec.exe \\branchpc telnet 172.2.2.1 psexec.exe \\branchpc cmd.exe telnet 172.2.2.1 psexec.exe \\branchpc -c plink -telnet 172.2.2.1 Methods 1 and 2 both failed because telnet.exe is not usable over psexec. Method 3 actually succeeded in creating the connection, but I cannot login because the session registers my carriage return twice. My password is always blank because at the "Username:" prompt I'm effectively typing: Routeruser[ENTER][ENTER] It's probably time to deploy WinRM... Does anyone know of any other alternatives? Does anyone know how I can fix plink.exe so it only receives one carriage return when I use it over psexec?

  Read the article

• DNS setup problems with Windows Azure VPS

  - by jbigelow

  What is the proper to setup the A record (or CNAME) for a Windows Azure VPS? I can't connect to my website after setting up IIS and believe I don't have the correct DNS setup. I created a small VPS instance with the default Windows Server 2012 configuration. I RDP'd in and added the Webserver role. In my DNSMadeEasy control panel I added an A record with my Public Virtual IP Address. In IIS I went to the default website and added bindings for the hostname of my website, so I should be able to type mywebsite.com and see the IIS 8 splash screen, but instead my browser cannot connect. I attempted to navigate to the site by typing in my Virtual IP address into the browser and still cannot connect. I RDP'd back into the machine and turned off Windows Firewall. No change, still cannot navigate to my website. From within IIS I double checked my binding. If I click "browse *:80" I can bring up my website in IE with the http:// localhost address. If I click "browse mywebsite on *.80" IE says "This page cannot be displayed.", from within the RDP session I can view the site if I navigate to http:// 127.0.0.1 but not if I navigate to my Virtual IP, nor can I view the page if I try navigating to http:// mywebservername.cloudapp.net I'm thinking I must be fundamentally not understanding how do DNS setup with Azure VPS but my initial Google searches aren't turning up any helpful information. (spaces added after the http:// so serverfault doesn't try and render them as valid urls.)

  Read the article

• Windows Server 2003 DHCP not handing out IPs

  - by SnOrfus

  I'm trying to setup a home server (to tinker with) as a domain controller. I've setup the domain and I've installed DHCP and setup a scope without any exclusions (with the default range of 192.168.0.1-254). My client machine is a Windows 7 (RC) machine and it has a connection but can't get an IP address. Even if I try setting the IP to a static 192.168.0.2 and there is still no connectivity. I can ping it from the server, but pinging the server from the client just times out. The only thing between the server and the client is a 24 port switch (D-Link DES-1024D). edit Ok, it turned out that the interfaces were setup backwards in the NAT settings (the internal nic connection was set to public and the external nic connection was set to private). I changed this and all was OK.... sort-of. Problem is now: If I set a static ip on the client (where I am typing this from) all is fine. BUT; when I set it to get it from DHCP, I get a correct IP from the server (192.168.0.2) but there is no internet on the client; but I can still ping the server fine from the client (which makes sense cause I was able to get an IP from it). edit I ended up just removing the Routing and DHCP server roles and just going with ICS for the time being until I get my hands on some better learning tools.

  Read the article

• Time not propagating to machines on Windows domain

  - by rbeier

  We have a two-domain Active Directory forest: ourcompany.com at the root, and prod.ourcompany.com for production servers. Time is propagating properly through the root domain, but servers in the child domain are unable to sync via NTP. So the time on these servers is starting to drift, since they're relying only on the hardware clock. WHen I type "net time" on one of the production servers, I get the following error: Could not locate a time-server. More help is available by typing NET HELPMSG 3912. When I type "w32tm /resync", i get the following: Sending resync command to local computer The computer did not resync because no time data was available. "w32tm /query /source" shows the following: Free-running System Clock We have three domain controllers in the prod.ourcompany.com subdomain (overkill, but the result of a migration - we haven't gotten rid of one of the old ones yet.) To complicate matters, the domain controllers are all virtualized, running on two different physical hosts. But the time on the domain controllers themselves is accurate - the servers that aren't DCs are the ones having problems. Two of the DCs are running Server 2003, including the PDC emulator. The third DC is running Server 2008. (I could move the PDC emulator role to the 2008 machine if that would help.) The non-DC servers are all running Server 2008. All other Active Directory functionality works fine in the production domain - we're only seeing problems with NTP. I can manually sync each machine to the time source (the PDC emulator) by doing the following: net time \\dc1.prod.ourcompany.com /set /y But this is just a one-off, and it doesn't cause automated time syncing to start working. I guess I could create a scheduled task which runs the above command periodically, but I'm hoping there's a better way. Does anyone have any ideas as to why this isn't working, and what we can do to fix it? Thanks for your help, Richard

  Read the article

• Running multiple services on different servers with IPv6 and a FQDN

  - by Mark Henderson

  One of the things NAT has permitted us to do in the past decade is split physical services onto different servers whilst hiding behind a single interface. For example, I have example.com behind a NAT on 192.0.2.10. I port-forward :80 and :443 to my web server. I'm also port forward :25 to my mail server, and :3389 to a terminal server and :8080 to the web interface of my computer that downloads torrents, and the story goes on. So I have 5 port forwardings going to 4 different computers on example.com. Then, I go and get me some neat IPv6. I assign example.com an IPv6 address of 2001:db8:88:200::10. That's great for my websites, but I want to go to example.com:8080 to get to my torrents, or example:3389 to log on to my terminal server. How can I do this with IPv6, as there is no NAT. Sure, I could create a bunch of new DNS entries for each new service, but then I have to update all my clients who are used to just typing example.com to get to either the website or the terminal server. My users are dumber than two bricks so they won't remember to connect to rdp.example.com. What options do I have for keeping NAT-style functionality with IPv6? In case you haven't figured it out, the above scenario is not a real scenario for me, or perhaps anyone yet, but it's bound to happen eventually. You know, with devops and all.

  Read the article

• INFORMIX - listener thread err 25582

  - by Samuel Lao

  I´ve been digging different forums in the last 7 days looking for a possible solution.... Our database is based on informix running in a Linux server (LINUX SUSE 11). Suddenly, last saturday informix began to show an error message: listener-thread err=-25582 oserr=0, network connection is broken End users started to call reporting about slow network performance to this server, moments where the database application lost connection with server...so we proceeded doing a ping to the db server, getting good responses (1ms) without losing packets. I tried typing telnet (ipserver) 1526 which is informix's port for the application, it works. We had to disconnect the server and enable a backup db server which is located on another branch. It has been working in a regular way because the backup server hasn´t good specs (it is an old dell server model). So, I scanned the main server looking for viruses using Trend Micro Server Protect, it didn´t find anything (0 viruses and spywares). I revised the switches and routers, but I haven´t find anything strange... What else could be ? Thanks in advanced for your time and help with this issue.....I would really appreciate any advice...

  Read the article

• Booting VM Directly from iSCSI (or FC) in Hyper-V R2

  - by tony roth

  I have a server that san boots that I want to p2v. I have many options disk2vhd, scvmm etc but I was thinking about cloning the lun (flexclone, netapp) presenting it to my hyper-v r2 server. Within the hv manager do a create new disk then have it copy the cloned lun to a vhd file. Then do the bcdedit\bootsect stuff to it. Should work right? I'm also curious if anybodys booting vhd's that are on bootable luns? I've booted native vhd's just fine was just curious about the running them off a bootable lun. I think that this has quite a few advantages like instant p2v etc.. any thoughts on this? hmm dang as I was typing this I realized that I should not use the hv manager new disk copy routine, I should just disk2vhd the mounted lun. This has advantages in that it should be a lot faster!! discovered that disk2vhd may be flaky, crashed the first time I ran it! thanks

  Read the article

• Compaq R4000 laptop randomly locking up

  - by Josh

  I have a Compaq R4000 laptop with 2GB of RAM, running Ubuntu Linux 9.10. It is randomly locking up on me, approximately once every two days. I have a second partition with Windows XP Home installed, and I have had the system lock up in XP as well, meaning I believe this is a hardware issue. I have run two passes of Memtest86+ with no errors. The system has a fan that has died, so I initially suspected overheating. However the system just locked up on me while I was in the middle of typing a script to warn me / shut down if the temperature was too high. When the lockup happened the temperature was 88°F, so I am now starting to believe that may not be the issue. When the system locks up, I cannot SSH in nor ping it. Nothing shows in syslog when I reboot. I have configured it to send syslog messages to a local server as well and no messages appear on that server when the lockup happens. I am open to any and all advice!

  Read the article

• Windows Server 2003 DHCP not handing out IPs

  - by SnOrfus

  I'm trying to setup a home server (to tinker with) as a domain controller. I've setup the domain and I've installed DHCP and setup a scope without any exclusions (with the default range of 192.168.0.1-254). My client machine is a Windows 7 (RC) machine and it has a connection but can't get an IP address. Even if I try setting the IP to a static 192.168.0.2 and there is still no connectivity. I can ping it from the server, but pinging the server from the client just times out. The only thing between the server and the client is a 24 port switch (D-Link DES-1024D). edit Ok, it turned out that the interfaces were setup backwards in the NAT settings (the internal nic connection was set to public and the external nic connection was set to private). I changed this and all was OK.... sort-of. Problem is now: If I set a static ip on the client (where I am typing this from) all is fine. BUT; when I set it to get it from DHCP, I get a correct IP from the server (192.168.0.2) but there is no internet on the client; but I can still ping the server fine from the client (which makes sense cause I was able to get an IP from it). edit I ended up just removing the Routing and DHCP server roles and just going with ICS for the time being until I get my hands on some better learning tools.

  Read the article

• Changing order of Thunderbird email address autocomplete?

  - by Brooks Moses

  I recently did a system wipe and installed Thunderbird 3.0, and imported all of my email setup from a previous Thunderbird 2.0 installation. Almost everything is working fine, but I'm having a problem with the autocomplete in email addresses when writing messages. The relevant behavior is this: In the old 2.0 installation, the autocomplete appeared to know which email addresses I used most frequently, and so when I typed "m" in the address line, it would pick as the default selection the "m"-person who I frequently write email to. (It's possible this is an illusion and it simply picked people in the order I added them to my address book.) Thus, I have become used to typing "m"-"enter" in the address field, and getting this person. In the current 3.0 installation, however, the autocomplete order has changed. It's not the same as it was, and it's not alphabetical. The result is that I'm spending extra time looking at the email address bar, and more annoyingly, half the time the old muscle-memory kicks in and I find myself with an email that's addressed to a couple of customers rather than to my boss and coworker. Thus, two questions: How does Thunderbird determine this autocomplete order, among a set of addresses all of which are in the same address book? How can I change this ordering to be what I want? (I have tried Google-searching, and found a number of incomplete answers, nearly all of which were for version 1.0 or thereabouts, and reference settings dialog boxes that no longer exist.)

  Read the article

• How do I create and conveniently search through Libraries in Windows 8?

  - by mtone

  In Windows 7, I took the habit of putting most of my frequently accessed disk areas as Libraries - there were about a dozen. Typing a word in the Start menu would then give me a summary of matches by Library. For example, searching for "WPF" would tell me that I've got some results in the Books library, in the Coding library and a few other PDFs in the Downloads library, one of which I could then expand to see all results within. In Windows 8, that functionality appears to be gone. The Search function in the Charms Bar lists tons of results by type (Documents, Pictures, et cetera) but not by Library. This is practically useless since Documents contains hundreds of .txt and .cs files, a few of which might be Books or Downloads. The only option I found is to go into Explorer and use the search bar in the Library section. However, there again, all search results are mixed together, and I can't seem to find a way to know which Library each result came from (in the Details view, I didn't find a Library column I could add). So, if I want to know which Library contains stuff about a given topic, I have to search the Libraries one by one. Very inconvenient. Is Microsoft slowly deprecating libraries? Any tips? How else can I search through libraries?

  Read the article

• Change XRDP keyboard layout to en-gb Ubuntu 12.04

  - by Earl Sven

  Does anybody know how to change the keyboard layout to en-gb in an XRDP session on Ubuntu 12.04? I am using mstsc.exe to connect to an XRDP server hosting an XVNC session, however I cannot work out how to apply the UK keyboard layout. A bit of googling has yeilded these instructions which allow me to change the keymap, however using the keymap file I downloaded from here I loose the ability to use the arrow keys, home/end etc. Comparing the file with the standard one there are substantially more differences than I would expect considering the similarity between the layouts. I only have RDP access to the box so i don't seem to be able to actually generate a new layout per the instructions above, maybe it's a local console thing? Also I can't change either the RDP client used or the RDP server as they are my only access to the system, I don't have local console access. I do have root priveleges on the OS however. Any thoughts? Edit: I have found http:// xrdp.sourceforge.net/documents/keymap/newkeymap.html (apologies for not typing the link properly but the antispam filter won't let me post more than 2 links) this documentation on the XRDP sourceforge page which describes keymap file format. It indicates the values in the keymap files are unicode 0x64 etc, however the files I have already on my system seem to use a different format 0:0 or 65307:27 etc, does anybody know what the difference is?

  Read the article

• Google Chrome doesn't respond user actions correctly

  - by Carlos A. Junior

  Recently I've changed my OS to Ubuntu 12.04 (Cinnamon, 64 bits) from Mint 13 (KDE, 64 bits) and one same bug still appears on new installation. The Google Chrome it seems that don't refresh (repaint) page based on my interactions. Example: When i'm try comment an Youtube vídeo, when i click on textarea, o cursor don't appear inside of textarea, BUT, when/if i change to another tab and return the cursor appears...OK... If i start write some text...according i'm typing the chars don't appers...again if i change to another tab and return the typed text appears on textarea. Other cases that this bug appears: Modal boxes link...don't show the modal; Forms inside modal boxes don't show typed chars; The common Discus comment plugin don't work when focused; I don't have any idea of reason of this bug. (video driver, window manager, Chrome bug ?, i don't know) Any idea to solve this ? Additional informations: Google Chrome 22.0.1229.79 (Official Build 158531) OS Linux WebKit 537.4 (@129177) JavaScript V8 3.12.19.11 Flash 11.3.31.331 User Agent Mozilla/5.0 (X11; Linux i686) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.79 Safari/537.4 Command Line /opt/google/chrome/google-chrome --flag-switches-begin --flag-switches-end Executable Path /opt/google/chrome/google-chrome Profile Path /home/carlos/.config/google-chrome/Default Kernel version: 3.2.0-31-generic-pae Ubuntu 12.04 Best regards.

  Read the article

• Windows 7 PC cannot see some LAN PCs, but can access them via path

  - by zoot

  In an office LAN, with Windows 7 Professional workstations and a FreeNAS Samba server, 2 workstations have intermittent problems in browsing for the other workstations, as well as the FreeNAS server. However, so far, it appears that typing in the path to any of the workstations which aren't visible via the "browse" function, works. ie. the machine Workstation7 is not visible while browsing via Windows Explorer, but is accessible if I type \\Workstation7 in the path field. Occasionally the workstations exhibiting these symptoms show errors that their connection to the FreeNAS server has failed and only rebooting resolves the issue. All other workstations on the network use identical Windows 7 Professional installations and never have these problems. I've checked all machines and they're not using Home Groups. All are setup on the same WorkGroup as the FreeNAS server and the network type is set to Work Network. Temporarily disabling the firewall on the workstations with the issue made no difference, so I know this has nothing to do with the firewall settings. Any pointers would be appreciated. Thanks.

  Read the article

• Running the LibreOffice MSI installer in English

  - by Scott Severance

  I'm trying to install LibreOffice on a machine running a Korean version of Windows XP. I don't know Korean. I haven't used Windows with any frequency in many years, so I'm pretty lost. When I run the installer, it shows up in Korean. But, I want to customize the installation, so I need the installer to be in English. Googling took me to this page, where I found an example command to run the installer in Gaelic, which I modified for my system as follows: msiexec /i LibO_3.6.1_Win_x86_install_multi.msi TRANSFORMS=:1084 This works, except that I know less about Gaelic than I do about Korean. The help page provided a link to a page where I could look up the ID codes. From that page, I determined that the correct code was 1033 for US English and 2057 for UK English. When I substituted the code, I got an error message. Here's the messages as translated by Google, followed by the original: Transform can not be applied.Verify that the specified transform paths are valid. ?? ??? ??? ? ????. ??? ?? ??? ???? ?????. I can't very well search on a machine translation, so I don't know where to go from here.What is the problem? How can I make the installer operate in English? Alternatively, how can I change XP to display its interface in English, while keeping full functionality for typing in Korean?

  Read the article

• IIS FTP error: 426 Connection closed; transfer aborted.

  - by Jiaoziren

  Hi, I have an IIS FTP set up on Windows 2003 SP2 (S1). Everyday in the early morning, a script on another server (S2) will run and initiate FTP transfer of pulling log files from S1 to S2. The FTP client we're using is built-in FTP.exe in Windows 2000 on S2. Recently we replaced S1 with a new server however we kept the IP address. There are multiple IP addresses on new S1. Ever since the new S1 was in place, the '426 Connection closed; transfer aborted.' errors haven been occuring randomly. The log indicated that the transfer started ok however the file cannot be transferred completely, as per log below: mget access*.log 200 Type set to A. 200 PORT command successful. 150 Opening ASCII mode data connection for access02232010.log(205777167 bytes). 426 Connection closed; transfer aborted. ftp: 20454832 bytes received in 283.95Seconds 72.04Kbytes/sec. The firewall monitor suggested that the connection was setup in passive mode however I've been told that MS FTP.exe doesn't support passive mode. Though I can see the response of 'entering passive mode' from server when typing in 'quote pasv'. My network admin has told me to try the transfer in active mode however I don't know how to open active mode on client side. It's getting really frustrating. Wish someone here has the right knowledge/experience could shed me a light. Cheers.

  Read the article

• Apache Alias Isn't In Directory Listing

  - by Phunt

  I've got a site running on my home server that's just a front end for me to grab files remotely. There's no pages, just a directory listing (Options Indexes...). I wanted to add a link to a directory outside of the webroot so I made an alias. After a minute of dealing with permissions, I can now navigate to the directory by typing the URL into the browser, but the directory isn't listed in the root index. Is there a way to do this without creating a symlink in the root? Server: Ubuntu 11.04, Apache 2.2.19 Relevant vhost: <VirtualHost *:80> ServerName some.url.net DocumentRoot "/var/www/some.url.net" <Directory /var/www/some.url.net> Options Indexes FollowSymLinks AllowOverride None Order Allow,Deny Allow From All AuthType Basic AuthName "TPS Reports" AuthUserFile /usr/local/apache2/passwd/some.url.net Require user user1 user2 </Directory> Alias /some_alias "/media/usb_drive/extra files" <Directory "/media/usb_drive/extra files"> Options Indexes FollowSymLinks Order Allow,Deny Allow From All </Directory> </VirtualHost>

  Read the article

• On Windows XP, Start > Run "My Documents" sometimes doesn't work

  - by Clayton Hughes

  On all of my home computers, I can enter "my documents" into the Start Run prompt and the My Documents folder of the current profile will open up. What's more, I can continue typing subfolders, files, etc. and auto-complete works and it's smart and enjoyable. I can't check at the moment, but I'm almost positive entries like "My Pictures" and "My Music" also go to their correct folders. On my work computers, if I enter "my documents" into the Start Run prompt, I get the following error: "Windows cannot find 'my'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start Button, and then click Search." I can sort of circumvent this by creating a shortcut in my PATH named 'my' that points to My Documents folder, but this doesn't solve the auto-complete option (and it's otherwise imperfect, of course, because "my pictures" or "my music" all direct to the same place. A google search doesn't provide much help on this, although it does identify a poster in 2007 with this same question at another board: http://www.msfn.org/board/lofiversion/index.php/t124813.html (Login required, but Google cache available here: http://preview.tinyurl.com/ygxhwwl) Is this just a limitation of the networks belonging to a domain, or is there some way I can get this functionality back? My documents folder does live in the standard place (C:\Documents and Settings{username}\My Documents), and not on a network drive or anything. It's probably worth adding that the computers are part of some freakish Novell domain thing, too. I'm not in IT here so I'm not too up on the details. Thanks for any help/suggestions!

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >