Search Results

Search found 6517 results on 261 pages for 'localhost'.

Page 91/261 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

  • Apache2 - Hosting two sites on the same domain with different ports

    - by user1026361
    I am hosting a staging site (test.mydomain.com) which currently work well on port 80 for two sites (test.mydomain.com and test.FRmydomain.com) I am working on a new backend and I would like to deploy a third site on this server for testing. My hope is that it will live at test.mydomain.com:4204. I've got some experience with apache and quickly added statements: Listen 4204 NameVirtualHost *:4204 and created a new config for my site. What I imagine are the relevant parts of my config: <VirtualHost *:4204 > ServerAdmin [email protected] ServerName test.mydomain.com:4204 However, the site is not publicly available, by name or ip. If i curl localhost:4204 from the server, I get the expected page content At this point, I'm a bit of a loss on how to go forwards. It seems like my config is correct but not available to be served. Am I better off defining a proxy definition so that, for instance: test.mydomain.com/4204 proxies to my localhost server or is there a way to make the site available via the internet? EDIT: I have added an iptable rule after further Googling with the command: iptables -I INPUT -p tcp --dport 4204 -j ACCEPT I can see apache listening on 4204 and the rule is definitely in place but cant reach the site

    Read the article

  • rsyslog - template - regex data for insertion into db

    - by Mike Purcell
    I've been googling around the last few days looking for a solid example of how to regex a log entry for desired data, which is then to be inserted into a database, but apparently my google-fu is lacking. What I am trying to do is track when an email is sent, and then track the remote mta response, specifically the dsn code. At this point I have two templates setup for each situation: # /etc/rsyslog.conf ... $Template tpl_custom_header, "MPurcell: CUSTOM HEADER Template: %msg%\n" $Template tpl_response_dsn, "MPurcell: RESPONSE DSN Template: %msg%\n" # /etc/rsyslog.d/mail if $programname == 'mail-myapp' then /var/log/mail/myapp.log if ($programname == 'mail-myapp') and ($msg contains 'X-custom_header') then /var/log/mail/test.log;tpl_custom_header if ($programname == 'mail-myapp') and ($msg contains 'dsn=') then /var/log/mail/test.log;tpl_response_dsn & ~ Example log entries: MPurcell: CUSTOM HEADER Template: D921940A1A: prepend: header X-custom_header: 101 from localhost[127.0.0.1]; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<localhost>: headername: message-id MPurcell: RESPONSE DSN Template: D921940A1A: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[2607:f8b0:400e:c02::1a]:25, delay=2, delays=0.12/0.01/0.82/1.1, dsn=2.0.0, status=sent (250 2.0.0 OK 1372378600 o4si2828280pac.279 - gsmtp) From the CUSTOM HEADER Template I would like to extract: D921940A1A, and X-custom_header value; 101 From the RESPONSE DSN Template I would like to extract: D921940A1A, and "dsn=2.0.0"

    Read the article

  • Postfix not working

    - by user1488723
    A while ago I installed the postfix mail server on my ubuntu 10.04 VPS. At the time it was working good but now it's just stopped working. I was trying to enable SASL authentification and somewhere it must have went really wrong. I've studied the postfix main.cf and done everything in an orderly fashion to ensure that it is nothing wrong. I also have Dovecot installed and configured dovecot.conf to run with Postfix. If I try to do telnet localhost 25 while logged in on the server I just get: Connection closed by foreign host. If I try to do telnet mail.example.com 25 "from the outside" I get: telnet: Unable to connect to remote host: No route to host And when I check the server log after the failed attempts I see this: Jun 28 15:49:31 msv postfix/smtpd[11839]: initializing the server-side TLS engine Jun 28 15:49:31 msv postfix/smtpd[11839]: connect from localhost.localdomain[127.0.0.1] Jun 28 15:49:31 msv postfix/smtpd[11839]: warning: SASL: Connect to /var/spool/postfix/private/auth failed: Connection refused Jun 28 15:49:31 msv postfix/smtpd[11839]: fatal: no SASL authentication mechanisms Jun 28 15:49:32 msv postfix/master[11598]: warning: process /usr/lib/postfix/smtpd pid 11839 exit status 1 Jun 28 15:49:32 msv postfix/master[11598]: warning: /usr/lib/postfix/smtpd: bad command startup -- throttling main.cf file looks like this: smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no delay_warning_time = 4h myhostname = mail.example.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydomain = example.com myorigin = $mydomain mydestination = $mydomain relayhost = mynetworks = 127.0.0.1 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all smtpd_use_tls = yes smtpd_tls_loglevel = 2 smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_sasl_auth_enable = yes smtpd_client_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination smtpd_sender_restrictions = permit_sasl_authenticated, permit_mynetworks smtpd_recipient_restrictions = permit_sasl_authenticated, reject_unauth_destination broken_sasl_auth_clients = yes smtpd_sasl_type = dovecot smtpd_sasl_path = /var/spool/postfix/private/auth smtpd_sasl_security_options = noanonymous Dovecot.conf file looks like this: protocols = imap imaps disable_plaintext_auth = no log_timestamp = "%b %d %H:%M:%S " ssl = yes ssl_cert_file = /etc/postfix/ssl/smtpd.crt ssl_key_file = /etc/postfix/ssl/smtpd.key mail_location = maildir:~/mail mail_access_groups = mail auth_username_chars = abcdefghijklmnopqrstuvwxyz protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep } auth default { mechanisms = plain login passdb pam { } userdb passwd { } socket listen { client { path = /var/spool/postfix/private/auth user = postfix group = postfix mode = 0660 } } }

    Read the article

  • Appears to be "randomly" switching between the acl matched backend and the default backend

    - by Xoor
    I have HAProxy acting as a proxy in front of: An NGinx instance An in-house load balancer in front of multiple dynamic services exposed with socket.io (websockets) My problem is that from time to time my connections are proxied correctly to my socket.io cluster, and then randomly it fallsback to routing to NGinx which obviously is annoying and meaningless since NGinx isn't mean't to handle the request. This happens when requesting for URLs of the format : http://mydomain.com/backends/* There's an ACL in the HAProxy config to match the '/backends/*' path. Here's a simplified version of my HAProxy config (removed extra unrelated entries and changed names): global daemon maxconn 4096 user haproxy group haproxy nbproc 4 defaults mode http timeout server 86400000 timeout connect 5000 log global #this frontend interface receives the incoming http requests frontend http-in mode http #process all requests made on port 80 bind *:80 #set a large timeout for websockets timeout client 86400000 # Default Backend default_backend www_backend # Loadfire (socket cluster) acl is_loadfire_backends path_beg /backends use_backend loadfire_backend if is_loadfire_backends # NGinx backend backend www_backend server www_nginx localhost:12346 maxconn 1024 # Loadfire backend backend loadfire_backend option forwardfor # This sets X-Forwarded-For option httpclose server loadfire localhost:7101 maxconn 2048 It's really quite confusing for me why the behaviour appears to be "random", since being hard to reproduce it's hard to debug. I appreciate any insight on this.

    Read the article

  • Getting a "403 access denied" error instead of serving file (using django, gunicorn nginx)

    - by Finglish
    Getting a "403 access denied" error instead of serving file (using django, gunicorn nginx) I am attempting to use nginx to serve private files from django. For X-Access-Redirect settings I followed the following guide http://www.chicagodjango.com/blog/permission-based-file-serving/ Here is my site config file (/etc/nginx/site-available/sitename): server { listen 80; listen 443 default_server ssl; server_name localhost; client_max_body_size 50M; ssl_certificate /home/user/site.crt; ssl_certificate_key /home/user/site.key; access_log /home/user/nginx/access.log; error_log /home/user/nginx/error.log; location / { access_log /home/user/gunicorn/access.log; error_log /home/user/gunicorn/error.log; alias /path_to/app; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Scheme $scheme; proxy_pass http://127.0.0.1:8000; proxy_connect_timeout 100s; proxy_send_timeout 100s; proxy_read_timeout 100s; } location /protected/ { internal; alias /home/user/protected; } } I then tried using the following in my django view to test the download: response = HttpResponse() response['Content-Type'] = "application/zip" response['X-Accel-Redirect'] = '/protected/test.zip' return response but instead of the file download I get: 403 Forbidden nginx/1.1.19 Please note: I have removed all the personal data from the the config file, so if there are any obvious mistakes not related to my error that is probably why. My nginx error log gives me the following: 2012/09/18 13:44:36 [error] 23705#0: *44 directory index of "/home/user/protected/" is forbidden, client: 80.221.147.225, server: localhost, request: "GET /icbdazzled/tmpdir/ HTTP/1.1", host: "www.icb.fi"

    Read the article

  • Why Ubuntu could treat hosts file so strange?

    - by z4y4ts
    I have almost fresh Ubuntu desktop box. OS was installed two weeks ago and updated from karmic repositories. Last week I had no problems with DNS. But this week something had changed. I'm not sure what and when, and not sure whether I changed any configs. So now I have some really weird situation. According to logs name resolving should work normally. /etc/hosts 127.0.0.1 localhost test 127.0.1.1 desktop /etc/host.conf order hosts,bind multi on /etc/resolv.conf # Generated by NetworkManager search search servers obtained via DHCP nameserver 192.168.0.3 /etc/nsswitch.conf passwd: compat group: compat shadow: compat hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis But if fact it is not. user@test ~ping test PING localhost (127.0.0.1) 56(84) bytes of data. [skip] Pinging is ok. user@test ~host test test.myviacube.com has address xx.xxx.161.201 But pure I suspect that NetworkManager might cause this misbehavior, but don't know where to start to check it. Any thoughts, suggestions?

    Read the article

  • Using Confluence with virtual hosts and mod_proxy

    - by Marcus
    Hi @all, on a test server I have installed the latest version of Confluence. I configured a apache with ajp. But I have a problem, when I login in Confluence, I get the following error message: Not Found The requested URL / / homepage.action was not found on this server. The problem seems to be known, I found following Link: http://confluence.atlassian.com/display/DOC/Using+Apache+with+virtual+hosts+and+mod_proxy But unfortunately the forwards have not helped, I still get the error messages. Does anyone have any idea how I could solve the problem? The following Apache configuration I have set up: LoadModule proxy_module /usr/lib/apache2/modules/mod_proxy.so LoadModule proxy_http_module /usr/lib/apache2/modules/mod_proxy_http.so LoadModule proxy_ajp_module /usr/lib/apache2/modules/mod_proxy_ajp.so <IfModule proxy_http_module> ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> <Location /> Order allow,deny Allow from all </Location> ProxyPass / http://localhost:8080/ ProxyPassReverse / http://localhost:8080/ </IfModule>

    Read the article

  • Can't login to phpMyAdmin on a WAMP server running Windows 2008

    - by Richard West
    I am setting up a new server. I have installed Apache 2.2.17, PHP 5.3.3, MySQL 5.1.53 and phpMyAdmin 3.3.8 running on a Windows 2008 (32 bit) OS. I have configured Apache and PHP so they appear to be working fine. I have created the standard test php page with the following code and everything appears to be working fine. <?php //index.php phpinfo(); ?> I also see the mySQL and mySQLi section in the above webpage, so it appears that that I have the proper extensions loaded for mySQL access. The problem that I am having centeres around myPHPAdmin. I have this installed and I can access to the login screen at http://localhost/pma I login using "root" and the password I have setup for root. After a delay of 30 seconds or so the web page goes to a blank screen, and the url is now http://localhost/pma/index.php?token= No error is ever displayed - however nothing usable is either. I have confirmed that mySQL is running by going to the command line and logging into mySQL from there. I have double checked my configuration but I am not having any luck getting this to work. I have also disabled the Windows firewall, but that did not change anything. I installed mySQL using the standard port 3306. Any advice would be greatly appreciated.

    Read the article

  • .ashx cannot find type error on IIS7 , no problems on webdev server

    - by Aivan Monceller
    I am trying to make AspNetComet.zip work on IIS7 (a simple comet chat implementation) Here is a portion of my web.config. <system.web> <httpHandlers> <add verb="POST" path="DefaultChannel.ashx" type="Server.Channels.DefaultChannelHandler, Server"/> </httpHandlers> </system.web> <system.webServer> <handlers> <add name="DefaultChannelHandler" verb="POST" path="DefaultChannel.ashx" type="Server.Channels.DefaultChannelHandler, Server"/> </handlers> </system.webServer> When I publish the website on my localhost IIS7 I receive an error: POST http://localhost/DefaultChannel.ashx 500 Internal Server Error Could not load type 'Server.Channels.DefaultChannelHandler The target framework of this project is .Net 2.0 I tried the Classic and Integrated Mode application pool for .Net 2.0 with no luck. I also tried converting the project to 4.0 and tried the Classic and Integrated Mode application pool for .Net 4.0 with no luck. I also tried adding the managed handler through IIS Manager's Handler Mappings. If you have time please download the source (184kb) to reproduce the problem on your own machine. The zip contains a VS2010 solution (.Net 2.0). You could also try to convert this to .Net 4.0 I am using Windows 7 anyway if that matters. If you need more details, please drop your comments below. This is working fine by the way on my webdev server.

    Read the article

  • HAProxy is caching the forwarding?

    - by shadow_of__soul
    i'm trying to set up a server structure for an application i'm building in Node.js with socket.io. My setup is: HAProxy frontend forward to -> apache2 as default backend (or nginx, is apache in this local test) -> node.js app if the url has socket.io in the request AND a domain name i have something like: global log 127.0.0.1 local0 log 127.0.0.1 local1 notice maxconn 4096 user haproxy group haproxy daemon defaults log global mode http maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 frontend all 0.0.0.0:80 timeout client 5000 default_backend www_backend acl is_soio url_dom(host) -i socket.io #if the request contains socket.io acl is_chat hdr_dom(host) -i chaturl #if the request comes from chaturl.com use_backend chat_backend if is_chat is_soio backend www_backend balance roundrobin option forwardfor # This sets X-Forwarded-For timeout server 5000 timeout connect 4000 server server1 localhost:6060 weight 1 maxconn 1024 check #forwards to apache2 backend chat_backend balance roundrobin option forwardfor # This sets X-Forwarded-For timeout queue 50000 timeout server 50000 timeout connect 50000 server server1 localhost:5558 weight 1 maxconn 1024 check #forward to node.js app The problem comes when i made a request to something like www.chaturl.com/index.html it load perfectly but fails to loads the socket.io files (www.chaturl.com/socket.io/socket.io.js) why it redirect to apache (and should redirect to the node.js app that serve the files). The weird thing is that if i access directly to the socket.io file, after refreshing a few times, it loads, so i suppose is "caching" the forwarding for the client when it makes the first request and reach the apache server. Any suggestion of how this can be solved? or what i can try or look about this?

    Read the article

  • wget is working only when used with sudo

    - by Yusuf
    I'm having quite a strange behavior with wget since yesterday. I can download files by using sudo wget, but when I try the same file with only wget, I can get this error: yusufh@ubuntu-yuh:~$ wget http://www.kegel.com/wine/winetricks --2010-12-17 09:34:11-- http://www.kegel.com/wine/winetricks Resolving www.kegel.com... failed: Name or service not known. wget: unable to resolve host address `www.kegel.com' and with sudo wget: yusufh@ubuntu-yuh:~$ sudo wget http://www.kegel.com/wine/winetricks --2010-12-17 09:35:37-- http://www.kegel.com/wine/winetricks Connecting to 127.0.0.1:5865... connected. Proxy request sent, awaiting response... 200 OK Length: 190672 (186K) [text/plain] Saving to: `winetricks' 100%[==================================================================================================>] 190,672 --.-K/s in 0.03s 2010-12-17 09:35:37 (6.92 MB/s) - `winetricks' saved [190672/190672] After the comments below, here is an update: I can use Google Chrome or Firefox perfectly without running it as root. I use ntlmaps to connect to the office proxy. So I need to use 127.0.0.1:5865 as the proxy for clients. Result for env | grep -i proxy: NO_PROXY=localhost,127.0.0.0/8,*.local, http_proxy=127.0.0.1:5865 ftp_proxy=127.0.0.1:5865 all_proxy=socks://127.0.0.1:5865/ ALL_PROXY=socks://127.0.0.1:5865/ https_proxy=127.0.0.1:5865 no_proxy=localhost,127.0.0.0/8,*.local while sudo env | grep -i proxy is empty! HELP!

    Read the article

  • nginx: how do I add new site/server_name in nginx?

    - by Neo
    I'm just starting to explore Nginx on my Ubuntu 10.04. I installed Nginx and I'm able to get the "Welcome to Nginx" page on localhost. However I'm not able to add a new server_name, even when I make the changes in site-available/default file. Tried reloading/restarting Nginx, but nothing works. One interesting observation. "http://mycomputername" in browser works. So somehow there is a command like 'server_name $hostname' somewhere over-riding my rule. File: sites-available/mine.enpass server { listen 80; server_name mine.enpass ; access_log /var/log/nginx/localhost.access.log; location / { root /var/www/nginx-default; index index.html index.htm; } } File: nginx.confg user www-data; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; # multi_accept on; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_comp_level 2; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; }

    Read the article

  • Can't connect to MySQL on CentOS 5 Error 13 - Permission Denied

    - by abszero
    Ok, I have an install of CentOS 5 running as a GuestOS in VirtualBox. The network card for the Cent box is bridged with that of my host OS so that the boxes can see each other. Cent has an IP of 192.168.1.108 and my Host box has an IP of .104. Everything, with regard to networking, seems to be working properly as I can access the Drupal install that is on the Cent box from a web browser on my host box by navigating to http://192.168.1.108 however when I try to configure the database for Drupal through the Drupal install interface I am getting the Can't connect to MySQL error. First I thought this might of been a Firewall issue so I stopped iptables but that had no effect. I thought maybe the user I had setup did not have access to the server so I tried root and that did not work. Searching on the net said that I needed to provide a bind-address parameter to my.cnf so I did that with no change. (As a side note the length of my my.cnf file was MUCH shorter than the ones presented online. In fact under mysqld all I have are datadir, socket, user, and bind-address. Is this normal or should the file be more verbose?) After a few hours of messing with permissions and such I tried using 'localhost' as the value for the database server, from my HOST OS, and the Drupal install kicked off without a problem. So while my issue is resolved I am curious as to why 'localhost' works and why 192.168.1.108 did not? Is there something i need to do to specifically access the MySQL box via the aforementioned IP? Thanks.

    Read the article

  • Attempting to set up xampp and zend server on the same machine

    - by umbregachoong
    I am attempting to set up the zend server and xampp on the same machine but I am running into problems. I came across documentation on the zend site that said you cannot do this. However the folks over at apachefriends said you can. I have since discovered that I can run some of the zendframework examples within xampp by downloading the zendframework2 library and the skeleton app from git and I am doing this right now. However, I would like to know how to set them both up without having any conflicts both for the apache2 server and phpmyadmin. (One of the frustrating things is trying to load phpmyadmin in the deployment dialog by using the zpk tool in Zend). What I did in trying to set up both servers on windows 7 is as follows: First I have tried to set up the httpd conf files separately for each server, xampp running on port 8082 , and zend running on port 8088. At the time xampp would work, but zend server would not. This is after setting up the virtual host files separately for each server. Question 1: Where are the zend server error logs? Earlier, I was able to get both of them running configuring the xampp server httpd-conf file alone, however, I experienced problems with phpmyadmin even after configuring phpmyadmin on xampp to work on a different port other than 3306. Second question here: how to set up the two mysql phpmyadmin instances so they do not conflict with each other? Here is the xampp virtual host section: ##ServerAdmin [email protected] DocumentRoot "C:/xampp/htdocs/" ServerName localhost 8082 ##ServerAlias www.dummy-host.example.com ##ErrorLog "logs/dummy-host.example.com-error.log" ##CustomLog "logs/dummy-host.example.com-access.log" common Here is the zend virtual host section: DocumentRoot "C:\Program Files (x86)\Zend\Apache2/htdocs" ServerName localhost:8088 </VirtualHost> I have looked at this httpd.apache.org/docs/2.2/vhosts/ and this http://survivethedeepend.com/zendframeworkbook/en/1.0/creating.a.local.domain.using.apache.virtual.hosts but I am obviously doing something wrong here. I also have the java sdk running on this machine with tomcat and apache and I have no conflicts- too bad this is not the case for zend server and xampp Thanks umbre gachoong

    Read the article

  • How to get nginx to pass HTTP_AUTHORIZATION header to Apache

    - by codeinthehole
    Am using Nginx as a reverse proxy to an Apache server that uses HTTP Auth. For some reason, I can't get the HTTP_AUTHORIZATION header through to Apache, it seems to get filtered out by Nginx. Hence, no requests can authenticate. Note that the Basic auth is dynamic so I don't want to hard-code it in my nginx config. My nginx config is: server { listen 80; server_name example.co.uk ; access_log /var/log/nginx/access.cdk-dev.tangentlabs.co.uk.log; gzip on; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_read_timeout 120; location / { proxy_pass http://localhost:81/; } location ~* \.(jpg|png|gif|jpeg|js|css|mp3|wav|swf|mov|doc|xls|ppt|docx|pptx|xlsx|swf)$ { if (!-f $request_filename) { break; proxy_pass http://localhost:81; } root /var/www/example; } } Anyone know why this is happening? Update - turns out the problem was something I had overlooked in my original question: mod_wsgi. The site in question here is a Django site, and it turns out that Apache does get the auth variables passed through, however mod_wsgi filters them out. The resolution is to use: WSGIPassAuthorization On See http://www.arnebrodowski.de/blog/508-Django,-mod_wsgi-and-HTTP-Authentication.html for more details

    Read the article

  • mysql.sock problem on Mac OS X, all Zend products

    - by Michael Stelly
    Hi folks. I posted this on the Zend forum, but I'm hoping I can get a speedier reply here. I've tried every solution provided on this forum with no luck. When I restart mysql, everything appears ok. sudo /usr/local/zend/bin/zendctl.sh restart Password: /usr/local/zend/bin/apachectl stop [OK] /usr/local/zend/bin/apachectl start [OK] Stopping Zend Server GUI [Lighttpd] [OK] spawn-fcgi: child spawned successfully: PID: 7943 Starting Zend Server GUI [Lighttpd] [OK] Stopping Java bridge [OK] Starting Java bridge [OK] Shutting down MySQL . SUCCESS! Starting MySQL . SUCCESS! Pinging locahost is also OK and resolve dns to IP. ping localhost PING localhost (127.0.0.1): 56 data bytes 64 bytes from 127.0.0.1: icmp_seq=0 ttl=64 time=0.048 ms 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.064 ms 64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.066 ms 64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.076 ms 64 bytes from 127.0.0.1: icmp_seq=4 ttl=64 time=0.064 ms But when I attempt to access the local url for my app, I get the dreaded: Message: SQLSTATE[HY000] [2002] Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2). This is a show-stopper for me. I appreciate any assistance. Thank you.

    Read the article

  • FastCGI Error when installing PHP on IIS7.5

    - by ytoledano
    I'm trying to install MediaWiki on a Win2008r2 server, but can't manage to install PHP. Here's what I did: Grabbed a Zip archive of PHP and unzipped it into C:\PHP. Created two subdirs: c:\PHP\sessiondata and c:\PHP\uploadtemp. Granted modify rights to the IUSR account for the subdirs. Copied php.ini-production as php.ini Edited php.ini and made the following changes: fastcgi.impersonate = 1 cgi.fix_pathinfo = 1 cgi.force_redirect = 0 open_basedir = "c:\inetpub\wwwroot;c:\PHP\uploadtemp;C:\PHP\sessiondata" extension = php_mysql.dll extension_dir = "./ext" upload_tmp_dir = C:\PHP\uploadtemp session.save_path = C:\php\sessiondata Install Web server role, selected CGI and HTTP Redirection options. In the Handler Mappings: Added Module Mapping. Entered the following values: Path = *.php, Module = FastCgiModule, Executable = c:\php\php-cgi.exe, Name = PHP via FastCGI. Created a test page into wwwroot directory: phpinfo.php and set the contents like this: < ?php phpinfo(); ? Browsed to http://localhost/phpinfo.php But then I get: HTTP Error 500.0 - Internal Server Error An unknown FastCGI error occured Detailed Error Information Module: FastCgiModule Notification: ExecuteRequestHandler Handler: PHP via FastCGI Error Code: 0x800736b1 Requested URL: http://localhost:80/phpinfo.php Physical Path: C:\inetpub\wwwroot\phpinfo.php Logon Method: Anonymous Logon User: Anonymous Does anyone know what I'm doing wrong here? Thanks.

    Read the article

  • How to configure IIS for SVG and web testing with Visual Studio?

    - by macias
    Let's say I have a simple web page with svg image in it: <img src="foobar.svg" alt="not working" /> If I make this page as static html page and view it directly svg is displayed. If I type the address of this svg -- it is displayed. But when I make this as .aspx page and launch it dynamically from Visual Studio I get alt text. If I type the address of this svg (from localhost, not as a local file) -- browser tries to download it instead of displaying. I already defined mime type in IIS (for entire server -- "image/svg+xml") and restarted IIS. Same effect as before. Question: what should I do more? Update WireShark won't work (it is in documentation), I tried also RawCap, but it cannot trace my connection (odd), luckily Fiddler worked: From client: GET http://127.0.0.1:1731/svg/document_edit.svg HTTP/1.1 Host: 127.0.0.1:1731 User-Agent: Mozilla/5.0 (Windows NT 6.1; rv:10.0.1) Gecko/20100101 Firefox/10.0.1 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip, deflate Connection: keep-alive Answer from server: HTTP/1.1 200 OK Server: ASP.NET Development Server/10.0.0.0 Date: Thu, 16 Feb 2012 11:14:38 GMT X-AspNet-Version: 4.0.30319 Cache-Control: private Content-Type: application/octet-stream Content-Length: 87924 Connection: Close <?xml version="1.0" encoding="UTF-8" standalone="no"?> <!-- Created with Inkscape (http://www.inkscape.org/) --> <svg xmlns: *** FIDDLER: RawDisplay truncated at 128 characters. Right-click to disable truncation. *** For the record, here is useful Q&A for Fiddler: http://stackoverflow.com/questions/826134/how-to-display-localhost-traffic-in-fiddler-while-debugging-an-asp-net-applicati

    Read the article

  • Forward real IP through Haproxy => Nginx => Unicorn

    - by Hendrik
    How do I forward the real visitors ip adress to Unicorn? The current setup is: Haproxy => Nginx => Unicorn How can I forward the real IP address from Haproxy, to Nginx, to Unicorn? Currently it is always only 127.0.0.1 I read that the X headers are going to be depreceated. http://tools.ietf.org/html/rfc6648 - how will this impact us? Haproxy Config: # haproxy config defaults log global mode http option httplog option dontlognull option httpclose retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 # Rails Backend backend deployer-production reqrep ^([^\ ]*)\ /api/(.*) \1\ /\2 balance roundrobin server deployer-production localhost:9000 check Nginx Config: upstream unicorn-production { server unix:/tmp/unicorn.ordify-backend-production.sock fail_timeout=0; } server { listen 9000 default; server_name manager.ordify.localhost; root /home/deployer/apps/ordify-backend-production/current/public; access_log /var/log/nginx/ordify-backend-production_access.log; rewrite_log on; try_files $uri/index.html $uri @unicorn; location @unicorn { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_redirect off; proxy_pass http://unicorn-production; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; } error_page 500 502 503 504 /500.html; client_max_body_size 4G; keepalive_timeout 10; }

    Read the article

  • Server unreachable without www

    - by deamon
    My server is unreachable without "www." prefix, even when trying it with ping. The DNS entry looks like this: $TTL 86400 @ IN SOA ns1.first-ns.de. postmaster.robot.first-ns.de. ( 2011010600 ; serial 14400 ; refresh 1800 ; retry 604800 ; expire 86400 ) ; minimum @ IN NS robotns3.second-ns.com. @ IN NS robotns2.second-ns.de. @ IN NS ns1.first-ns.de. @ IN A 1.2.3.4 localhost IN A 127.0.0.1 mail IN A 1.2.3.4 www IN A 1.2.3.4 ftp IN CNAME www imap IN CNAME www loopback IN CNAME localhost pop IN CNAME www relay IN CNAME www smtp IN CNAME www @ A DNS record of the same type for another domain on the same server is working with and without "www". And the VirualHost config looks like this: <VirtualHost *:80> ServerName somewhere.com ServerAlias www.somewhere.com ServerSignature Off ... </VirtualHost> Any idea what could be wrong?

    Read the article

  • how to debug when xinetd says : got signal 17 (child exited)

    - by Faizan Shaik
    I am trying to start services vsftpd and sshd using xinetd. my config files are as follows. /etc/xinetd.conf defaults { instances = 60 log_type = FILE /var/log/xinetdlog log_on_success = HOST PID log_on_failure = HOST cps = 25 30 only_from = localhost } includedir /etc/xinetd.d /etc/xinetd.d/ftp service ftp { disable = no server = /usr/sbin/vsftpd server_args = -l user = root socket_type = stream protocol = tcp wait = no instances = 4 flags = REUSE nice = 10 log_on_success += DURATION HOST USERID only_from = 127.0.0.1 10.0.0.0/24 } /etc/xinetd.d/ssh service ssh { disable = no log_on_failure += USERID server = /usr/sbin/sshd user = root socket_type = stream protocol = tcp wait = no instances = 20 flags = REUSE only_from = 127.0.0.1 10.0.0.0/24 } Even though i've included only_from attribute, vsftp server as well as ssh server are refusing connection from localhost. while vsftp and ssh servers are working fine individually when i check with "service vsftpd start" and "service ssh start". when i did debug using "xinetd -d" throug terminal i got the output as 13/10/20@00:06:08: DEBUG: 3592 {cnf_start_services} Started service: ftp 13/10/20@00:06:08: DEBUG: 3592 {cnf_start_services} Started service: ssh 13/10/20@00:06:08: DEBUG: 3592 {cnf_start_services} mask_max = 8, services_started = 2 13/10/20@00:06:08: NOTICE: 3592 {main} xinetd Version 2.3.14 started with libwrap loadavg options compiled in. 13/10/20@00:06:08: NOTICE: 3592 {main} Started working: 2 available services 13/10/20@00:06:08: DEBUG: 3592 {main_loop} active_services = 2 13/10/20@00:06:16: DEBUG: 3592 {main_loop} select returned 1 13/10/20@00:06:16: DEBUG: 3592 {server_start} Starting service ftp 13/10/20@00:06:16: DEBUG: 3592 {main_loop} active_services = 2 13/10/20@00:06:16: DEBUG: 3607 {exec_server} duping 9 13/10/20@00:06:16: DEBUG: 3592 {main_loop} active_services = 2 13/10/20@00:06:16: DEBUG: 3592 {main_loop} select returned 1 13/10/20@00:06:16: DEBUG: 3592 {check_pipe} Got signal 17 (Child exited) 13/10/20@00:06:16: DEBUG: 3592 {child_exit} waitpid returned = 3607 13/10/20@00:06:16: DEBUG: 3592 {server_end} ftp server 3607 exited 13/10/20@00:06:16: DEBUG: 3592 {svc_postmortem} Checking log size of ftp service 13/10/20@00:06:16: INFO: 3592 {conn_free} freeing connection 13/10/20@00:06:16: DEBUG: 3592 {child_exit} waitpid returned = -1 both services are getting started but neither of them is working. after banging for 3-4 hours i still don't have any clue about this error. Any help would be appreciated. thanks!

    Read the article

  • How to prevent remote hosts from delivering mail to Postfix with spoofed From header?

    - by Hongli Lai
    I have a host, let's call it foo.com, on which I'm running Postfix on Debian. Postfix is currently configured to do these things: All mail with @foo.com as recipient is handled by this Postfix server. It forwards all such mail to my Gmail account. The firewall thus allows port 25. All mail with another domain as recipient is rejected. SPF records have been set up for the foo.com domain, saying that foo.com is the sole origin of all mail from @foo.com. Applications running on foo.com can connect to localhost:25 to deliver mail, with [email protected] as sender. However I recently noticed that some spammers are able to send spam to me while passing the SPF checks. Upon further inspection, it looks like they connect to my Postfix server and then say HELO bar.com MAIL FROM:<[email protected]> <---- this! RCPT TO:<[email protected]> DATA From: "Buy Viagra" <[email protected]> <--- and this! ... How do I prevent this? I only want applications running on localhost to be able to say MAIL FROM:<[email protected]>. Here's my current config (main.cf): https://gist.github.com/1283647

    Read the article

  • postfix smtp_fallback_relay for deferred messages to a single domain

    - by EdwardTeach
    I use Postfix to send messages to a mail server outside my organization which frequently rejects/defers my mail. My Postfix server sees that these messages are deferred and tries again, eventually getting through. Final delivery can take up to an hour, which makes my users unhappy. In comparison, mail from my Postfix server to other hosts works normally. I have now found out about a second, unofficial MX for this domain that does not reject/defer mail. This second MX does not appear when doing a DNS MX query for the domain. Therefore, for the problem domain I would like to use this second MX as a fallback. That is: whenever mail is deferred by the primary MX, try again on the unofficial second MX. I see that there is already a postfix configuration "smtp_fallback_relay". However the documentation seems to indicate that I can not restrict usage of the fallback to a single domain. The documentation also doesn't mention deferred message handling. So is there a way to configure a single-domain, deferred-retry fallback host in Postfix? For reference, I am including my postconf output (the host names and ip addresses are fake): alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases, hash:/etc/postfix/legacy_mailman, ldap:/etc/postfix/ldap-aliases.cf append_dot_mydomain = no biff = no config_directory = /etc/postfix default_destination_concurrency_limit = 2 inet_interfaces = all inet_protocols = all local_destination_concurrency_limit = 2 local_recipient_maps = $alias_maps mailbox_size_limit = 0 mydestination = myhost.my.network, localhost.my.network, localhost, my.network myhostname = myhost.my.network mynetworks = 127.0.0.0/8, [::ffff:127.0.0.0]/104, [::1]/128, 10.10.10.0/24 myorigin = my.network readme_directory = no recipient_delimiter = + relay_domains = $mydestination relayhost = smtp_fallback_relay = the.problem.host smtp_header_checks = smtpd_banner = $myhostname ESMTP $mail_name virtual_alias_maps = hash:/etc/postfix/virtual

    Read the article

  • Truncated content with Apache on Vagrant VM

    - by Nev Stokes
    I'm using Vagrant to run a CentOS VM in order to try and achieve local development parity with our live servers. I've symlinked /var/www/html with the /vagrant shared directory and am forwarding port 80 for viewing at http://localhost:4567. I'm developing using SublimeText 2 on OS X Mountain Lion. Once I figured that iptables was tripping me up, all was well and good. Until I noticed something strange. I have a sample HTML page consisting of several paragraphs of lorem copy. I can view this fine in a browser on OS X. But when I make an edit, for example removing a paragraph, and refresh the content is truncated with the paragraph I deleted still visible. When I cat the files on the server I can see the changes I made but these aren't even reflected when I curl localhost. I strongly suspect that it's a problem with my Apache settings — with which I didn't really tinker — as the issue doesn't arise when I stop Apache and run sudo python -m SimpleHTTPServer 80 in the directory to view pages instead. What gives?

    Read the article

  • nginx projects in subfolders

    - by Timothy
    I'm getting frustrated with my nginx configuration and so I'm asking for help in writing my config file to serve multiple projects from sub-directories in the same root. This isn't virtual hosting as they are all using the same host value. Perhaps an example will clarify my attempt: request 192.168.1.1/ should serve index.php from /var/www/public/ request 192.168.1.1/wiki/ should serve index.php from /var/www/wiki/public/ request 192.168.1.1/blog/ should serve index.php from /var/www/blog/public/ These projects are using PHP and use fastcgi. My current configuration is very minimal. server { listen 80 default; server_name localhost; access_log /var/log/nginx/localhost.access.log; root /var/www; index index.php index.html; location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www$fastcgi_script_name; include fastcgi_params; } } I've tried various things with alias and rewrite but was not able to get things set correctly for fastcgi. It seems there should be a more eloquent way than writing location blocks and duplicating root, index, SCRIPT_FILENAME, etc. Any pointers to get me headed in the right direction are appreciated.

    Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >