Search Results

Search found 13104 results on 525 pages for 'malcolm box'.

Page 91/525 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• Linux Software RAID1 Rebuild Completes, but after reboot, its degraded again

  - by zimmy6996

  I have been beating my head with an issue here, and I'm now turning to the internet for help. I have a system running Mandrake Linux, with the following configuration: /dev/hda - This is a IDE drive. Has some partitions on it that boot the system and make up most of the file system. /dev/sda - This is drive 1 of 2 for a software raid /dev/md0 /dev/sdb - This is drive 2 of 2 for a software raid /dev/md0 md0 gets mounted but fstab as /data-storage, so it is not critical to the systems ability to boot. We can comment it out of fstab, and the system works just fine either way. The problem is, we have a failed sdb drive. So I shut the box down, and have pulled the failed disk and installed a new disk. When the system boots up, /proc/mdstat shows only sda as part of the raid. I then run the various command to rebuild the RAID to /dev/sdb. Everything rebuilds correctly, and upon completion, you look at /proc/mdstat and it shows 2 drives sda1(0) and sdb1(1). Everything looks great. Then you reboot the box ... UGH!!! Once rebooted, sdb is missing again from the RAID. It is like the rebuild never happened. I can walk through the commands to rebuild it again, and it will work, but again, after reboot, the box seems to make sdb just vanish! The real odd thing is, if after reboot, I pull sda out of the box, and try to get the system to load with the rebuilt sdb drive in the system, and when I do, the system actually throws and error just after grub, and says something about drive error, and the system has to shut down. Thoughts??? I'm starting to wonder if grub has something to do with this mess. That the drive isn't being setup within grub to be visible at boot? This RAID array isn't necessary for the system to boot, but when the replacement drive is in there, without SDA it won't boot system, so it makes me believe there is something to that. On top of that, there just seems to be something wonky here the drive falling off of RAID after reboot. I've hit the point of pounding my head on the keyboard. Any help would be greatly appreciated!!!

  Read the article

• postfix on same server as apache2 mysql php

  - by Sandro Dzneladze

  I've dedicated box that hosts wordpress blog with huge traffic. I need mail functionality for me and 2 other employees. I also need mail send capability for fail2ban and logwatch applications. I don't want to stress this box too much, so I wonder: How scure can postfix be? Will I stress server beyond needed with antivirus and mail filters? and postfix? Server is with 2gb ram, e5600 nothing fancy a simple pc.

  Read the article

• My network manager stop running very shotly when installed VirtualBox-4.0, reporting network manager not running

  - by wangolo joel

  I fell into a snare when i downloaded and install virtual box 4.0 on my ubuntu 10.4, when i started the virtualbox i tried i saw that my network icon on my desktop showed my red x showing iam disconnected and this happened shortily when i installed virtual box 4.0 I have searched through the web and found some people who have faced some problem. but the solution they gave them i tried but it coudn't work, of restarting,starting ,stoping the netowrk manager, i was even thinking of uninstalling this virutalbox but not netowrk connection truely i need your help

  Read the article

• display values within stacked boxes of rowstacked histograms in gnuplot?

  - by gojira

  I am using gnuplot (Version 4.4 patchlevel 2) to generate rowstacked histograms, very similar to the example called "Stacked histograms by percent" from the gnuplot demo site at http://www.gnuplot.info/demo/histograms.html I want to display the values of each stacked box within it. I.e. I want to display the actual numerical value (in percent and/or the absolute number) of each box. How can I do that?

  Read the article

• VMWare Question

  - by Foghail

  Was wondering if anyone knew how to get 3-4 virtual box's to share the same monitor (i.e. so i could potentially get 4 box's on one screen, each screen environment would need to maintain its 1280x1024 internal resolution (so scale i guess?) anyways if you could help it would be greatly appreciated. I'm new to VMWare so please be gentle :-P

  Read the article

• How can I unlock a HTG locker folder?

  - by anu

  I created a HTG locker folder with password a few months ago (I just looked it up on Google and found out how to create one). Now when I try to open the locker, the dialogue box appears where I have to punch in the password, but it does not let me enter. The dialogue box keeps blinking and all of my important docs and lot of pictures are stored in that folder. Now how would one unlock the locked folder?

  Read the article

• How to configure RHEL so users can access an app GUI remotely

  - by Rhyuk

  I have an application installed in my RHEL6 box that has a GUI (AppGui.sh). My problem is that a few non-tech users would like to access this GUI remotely. I've tried several guides over the internet but I still cant make it work. I tried: -Installing X Window System -Enabling FORWARDX11=yes in my sshd_config -Exporting $DISPLAY variable -Connecting through ssh -X user@host (simply stays there) How can I setup my box from scratch to make this work?

  Read the article

• Sending computer audio output to multiple devices

  - by barfoon

  I'm looking to take an audio signal from a computer (1/8"), or multiple computers if possible, and send its output to some sort of switch/audio box that would allow me to choose between different receiving devices - say between headphones and a receiver. I don't want to split the signal, and I don't want to send the signal to both at once, I want to be able to choose where the signal goes. Is there a box that will do this?

  Read the article

• Backup of Xen servers and laptops with encryption

  - by Konrads

  Hello, I have the following backup objects: Multiple Xen Linux instances running on same box. A few laptops Windows that contain also private data that needs to be stored encrypted I have this backup media: A disk attached to the Xen box A disk available remotely for off-site backups I want to do daily-weekly-monthly backups of Xen systems and to back-up laptops in approximately same mode but in push mode (backup initiated by laptop) with encryption. Any good free solutions?

  Read the article

• Word in office 2007 and Windows 7 ultimate cant navigate to folders

  - by Nick White

  In word 2007 I click office button top left I click open, I get the open box, in the top address bar, I if I click on the down arrow far right (previous Locations) the drop down menu is empty just a box with nothing in it. To go anywhere from here I have to navigate via the left had pane, on all other windows systems this dropdown has enabled me to go to any location on my computer. I'm wondering if because all my word documents are on my D drive that windows 7 doesn't like it.

  Read the article

• VirtualBox no network access

  - by Frantumn

  I'm on a work machine, setting up a virtual ubuntu image using virtual box. After I installed the image, I can't seem to connect to the internet. If I look at network and sharing center on my host OS (W7) I see that the VirtualBox Host-Only Network reads as "no network access" How can I set it up so that it uses the same network as the host OS. UPDATE! Okay, is there a way I can tell virtual box host-only network to use a proxy script?

  Read the article

• IIS Manager won't let me create an application

  - by U62

  Had a thing at work today on a Windows Server 2003 box. In IIS Manager I'm trying to create an application for a directory. So I've brought up the properties dialog and clicked the "Create" button and it did absolutely nothing - no error, the application name box stays greyed out and there's no gear icon on the folder. Also there was no event log message. Has anyone seen this happen or know of a solution?

  Read the article

• Virtualbox - USB Devices don't install correctly using Windows 7

  - by MetaDark

  I am trying to install the drivers for my HTC Magic (2.1) and my iPod Touch "3G" 8GB (4.1), but when I plug them in, neither of them successfully install their drivers. They work perfectly fine when running on Windows natively, why are they behaving like this on Virtual Box? I am using Windows 7 (AMD64) - Natively & Non Natively. Ubuntu 10.10 - Also Natively Virtual Box 4.0.0 Hopefully someone has encountered this before and has an answer XD

  Read the article

• Symbol LL500 Scanner Interface Not Detected

  - by agentfll

  I have an old Symbol LL500 scanner interface box and a scanner to go with it. The box's original cable used one of the old microsoft mouse connectors, but I got a converter to USB. The problem is that when I connect it to my MacBook, the interface powers up and works, but the computer dosen't recognize it or even say that a device is connected. Is there any way to make it see that the interface is there or am I just screwed?

  Read the article

• How to remove Hyper-v from a Windows 7 machine?

  - by Tony_Henrich

  I installed Hyper-v 2008 r2 on a Windows 7 box thinking it works like Virtual PC because I wanted to run a Windows 2008 R2 64 vm. Now my machine dual boots between Windows 7 and hyper-v. How do I completely remove hyper-v and get the box back to the state before the install?

  Read the article

• FreeBSD and Linux VLAN

  - by mezgani

  I have a LAN and i need to create a LAB with three VLAN on my boxes, Linux and FreeBSD. so i create a VLAN 1 on the linux box as follow: sudo vconfig add eth0 1 sudo ifconfig eth0.1 inet6 add 2001:470:9b36:1:1::2/64 and i do the same on the FreeBSD box: sudo ifconfig vlan1 create sudo ifconfig vlan1 inet6 2001:470:9b36:1:1::1 prefixlen 64 vlan 1 vlandev bge0 But i still not able to ping the VLANs from each side ? NB: the eth0 and bge0 are up and running

  Read the article

• How to tune system settings for mongoDB on Linux?

  - by jsh

  Trying to squeeze a lot out of one question here -- please bear with me. Although the MongoDB man pages make several useful recommendations about system settings like ulimit (http://docs.mongodb.org/manual/reference/ulimit/), and other production factors (http://docs.mongodb.org/manual/administration/production-notes/) they seem mysteriously silent on things like virtual memory and swap settings. The closest we get to a hint is that "...the operating system’s virtual memory subsystem manages MongoDB’s memory..." (http://docs.mongodb.org/manual/faq/fundamentals/#does-mongodb-require-a-lot-of-ram). Running the same job - high writes and high reads on about 10,000,000 records in a single collection -- on my 4-processor, 4GB RAM macbook and an 8-core ubuntu box with 64GB RAM I saw dramatically WORSE read performance on the linux box with factory settings, and could hear the disk constantly spinning, indicating high I/O and presumably swapping. Yes, other things were happening on the box, but there was plenty of free RAM, disk space, etc.; furthermore, I did not see evidence that Mongo was expanding to take advantage of all that free RAM as it is touted to do. Linux box default settings were as follows: vm.swappiness =60 vm.dirty_background_ratio = 10 vm.dirty_ratio = 20 vm.dirty_expire_centisecs =3000 vm.dirty_writeback_centisecs=500 I hazarded some guesses looking at docs and blogs for other types of databases (Oracle, MYSQL, etc.), experimented, and adjusted as below. vm.swappiness=10 vm.dirty_background_ratio=5 vm.dirty_ratio=5 vm.dirty_writeback_centisecs=250 vm.dirty_expire_centisecs=500 I saw some immediate apparent improvements in read time. However, when I ran my test jobs again, read performance continued to be painfully sluggish during heavy writes. Then, I REBUILT the collection from an available data source - and suddenly I can read at 1ms or less per record WHILE doing the write job! So the question is really two-fold: 1) What are appropriate VM settings for MongoDB on Linux? 2) (bonus) Does Mongo do some checking or optimization with the OS while data is being built? In other words, if I have built a large data set with suboptimal VM or I/O settings, does Mongo make assumptions during the memory-mapping process that will fail to take advantage of optimizations down the road? Obviously I don't fully grok memory mapping under the hood (I was hoping I wouldn't have to). Any help appreciated...thanks! -j

  Read the article

• Postfix configuration (relay access)

  - by jome

  I have just installed POSTFIX on a Debian box, I pointed the relay host config setting to an exchange server which will deliver the mail to external users. So what I am trying to do is telnet to the debian box and send an email to [email protected] which will then be past to the exchange server for delivery. The problem is I get the following: rcpt to:[email protected] 554 relay access denied I have seen a section in the config "mydestination" but i want the exchange server to decide which domains it will deliver for and not the POSTFIX server.

  Read the article

• linux + dialog bin tool

  - by Diana

  I used the dialog binary tool to create some msgbox on Linux screen as the following example dialog –colors –title “test” –msgbox “type <ENTER> 8 50 My question how to kill the dialog process in order to clear the screen without dialog BOX , there no dialog process , I check with ps –ef , I also try to dialog –clear this isn’t clear the screen and the dialog box still exist Please advice?

  Read the article

• Available shells in plesk

  - by jr0d

  Does anyone know where plesk pulls its list of available shells under the domain setup page? I am on a box which is missing /bin/bash (chroot), though the majority of the system users on the machine have the shell: /usr/local/psa/bin/chrootsh On a redhat/centos machine, chrootsh is provided by the base psa package. I have also checked that chrootsh is specified in /etc/shells. I have poked around the psa database, but have not been able to ascertain where the drop down box is populated from.

  Read the article

• mail directory of exim and courier and ftp accounts?

  - by shadow_of__soul

  i'm making a server migration from a cpanel centos 5 box to a plain centos box. i already migrated, files, ssl, user system permissions and installed the basic service: as proftpd, apache, dovecot, exim, dns etc.. now what i can't find is where are the email accounts and the ftp account (that ones of [email protected]) in terms of email i want to migrate the accounts AND the emails stored in the server at the moment. Regards.

  Read the article

• HP Proliant G7 hardware RAID configuration automation with ribcl

  - by karthik

  I have been trying to automate hardware RAID configuration of HP proliant machines before OS installation (So I can not use hpacucli) ssh into iLO3 doesn't have option for RAID configuration I use ribcl but there is no command for RAID config, however I see this under the command GET_EMBEDDED_HEALTH. <STORAGE> <CONTROLLER> <LABEL VALUE="Controller on System Board"/> <STATUS VALUE="OK"/> <CONTROLLER_STATUS VALUE="OK"/> <SERIAL_NUMBER VALUE="50014380215F0070"/> <MODEL VALUE="HP Smart Array P420i Controller"/> <FW_VERSION VALUE="3.41"/> <DRIVE_ENCLOSURE> <LABEL VALUE="Port 1I Box 1"/> <STATUS VALUE="OK"/> <DRIVE_BAY VALUE="04"/> </DRIVE_ENCLOSURE> <DRIVE_ENCLOSURE> <LABEL VALUE="Port 2I Box 0"/> <STATUS VALUE="OK"/> <DRIVE_BAY VALUE="01"/> </DRIVE_ENCLOSURE> <LOGICAL_DRIVE> <LABEL VALUE="01"/> <STATUS VALUE="OK"/> <CAPACITY VALUE="68 GB"/> <FAULT_TOLERANCE VALUE="RAID 0"/> <PHYSICAL_DRIVE> <LABEL VALUE="Port 1I Box 1 Bay 3"/> <STATUS VALUE="OK"/> <SERIAL_NUMBER VALUE="6TA0N3SZ0000B231CYDT"/> <MODEL VALUE="EH0072FAWJA"/> <CAPACITY VALUE="68 GB"/> <LOCATION VALUE="Port 1I Box 1 Bay 3"/> <FW_VERSION VALUE="HPDH"/> <DRIVE_CONFIGURATION VALUE="Configured"/> </PHYSICAL_DRIVE> </LOGICAL_DRIVE> </CONTROLLER> </STORAGE> My question is, is there a way I modify/create this xml piece (say I have 2 Logical drive with one spare) and reboot the server it takes effect ? If this approach is not correct are there any other ways to automate hardware raid config ?

  Read the article

• No internet connection with Cisco VPN

  - by Macros

  I have a VPN connection set up using the Cisco VPN Client, and whenever I connect to it I lose my internet connection. This is the first time I have used this software, all previous VPNs I have used have been setup through Windows and I can uncheck the 'use remote gateway' box in the TCP-IP properties box to get around this. Is there a similar option in the Cisco Client that I am missing? I am running on Windows 7 32 bit

  Read the article

• How can I add a keyboard shortcut for Find-In-Files in SQL Server Management Studio?

  - by Eric H.

  I'd like to make it Ctrl-Shift-F to match Visual Studio. I realize to do that I need to remove that binding from the Query-Save to File item. But, I can't even add ANY shortcut. When I pull up the Tools/Customize box, pick Edit in the Categories and then Find-in-Files in the Commands, the box for "Modify Selection", where I assume I could add a shortcut, is greyed out. Any clues?

  Read the article

• Command-line tool to disable IPv6 in 2K8R2?

  - by brianicus

  I'm in the process of deploying a bunch of Win2K8R2 VMs via vSphere's deployment template stuff, and in the deploy specification it allows you to punch a list of commands to run. Aside from activating Windows (which it doesn't do), it works pretty well. Does anyone know the command-line equivalent of going into a network adapter's properties and unchecking the IPv6 box? If I had that I could put that in the spec and not have to manually uncheck the IPv6 box.

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >