Search Results

Search found 16397 results on 656 pages for 'pass 2012'.

Page 91/656 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

  • PASS: Bylaw Changes

    - by Bill Graziano
    While you’re reading this, a post should be going up on the PASS blog on the plans to change our bylaws.  You should be able to find our old bylaws, our proposed bylaws and a red-lined version of the changes.  We plan to listen to feedback until March 31st.  At that point we’ll decide whether to vote on these changes or take other action. The executive summary is that we’re adding a restriction to prevent more than two people from the same company on the Board and eliminating the Board’s Officer Appointment Committee to have Officers directly elected by the Board.  This second change better matches how officer elections have been conducted in the past. The Gritty Details Our scope was to change bylaws to match how PASS actually works and tackle a limited set of issues.  Changing the bylaws is hard.  We’ve been working on these changes since the March board meeting last year.  At that meeting we met and talked through the issues we wanted to address.  In years past the Board has tried to come up with language and then we’ve discussed and negotiated to get to the result.  In March, we gave HQ guidance on what we wanted and asked them to come up with a starting point.  Hannes worked on building us an initial set of changes that we could work our way through.  Discussing changes like this over email is difficult wasn’t very productive.  We do a much better job on this at the in-person Board meetings.  Unfortunately there are only 2 or 3 of those a year. In August we met in Nashville and spent time discussing the changes.  That was also the day after we released the slate for the 2010 election. The discussion around that colored what we talked about in terms of these changes.  We talked very briefly at the Summit and again reviewed and revised the changes at the Board meeting in January.  This is the result of those changes and discussions. We made numerous small changes to clean up language and make wording more clear.  We also made two big changes. Director Employment Restrictions The first is that only two people from the same company can serve on the Board at the same time.  The actual language in section VI.3 reads: A maximum of two (2) Directors who are employed by, or who are joint owners or partners in, the same for-profit venture, company, organization, or other legal entity, may concurrently serve on the PASS Board of Directors at any time. The definition of “employed” is at the sole discretion of the Board. And what a mess this turns out to be in practice.  Our membership is a hodgepodge of interlocking relationships.  Let’s say three Board members get together and start a blog service for SQL Server bloggers.  It’s technically for-profit.  Let’s assume it makes $8 in the first year.  Does that trigger this clause?  (Technically yes.)  We had a horrible time trying to write language that covered everything.  All the sample bylaws that we found were just as vague as this. That led to the third clause in this section.  The first sentence reads: The Board of Directors reserves the right, strictly on a case-by-case basis, to overrule the requirements of Section VI.3 by majority decision for any single Director’s conflict of employment. We needed some way to handle the trivial issues and exercise some judgment.  It seems like a public vote is the best way.  This discloses the relationship and gets each Board member on record on the issue.   In practice I think this clause will rarely be used.  I think this entire section will only be invoked for actual employment issues and not for small side projects.  In either case we have the mechanisms in place to handle it in a public, transparent way. That’s the first and third clauses.  The second clause says that if your situation changes and you fall afoul of this restriction you need to notify the Board.  The clause further states that if this new job means a Board members violates the “two-per-company” rule the Board may request their resignation.  The Board can also  allow the person to continue serving with a majority vote.  I think this will also take some judgment.  Consider a person switching jobs that leads to three people from the same company.  I’m very likely to ask for someone to resign if all three are two weeks into a two year term.  I’m unlikely to ask anyone to resign if one is two weeks away from ending their term.  In either case, the decision will be a public vote that we can be held accountable for. One concern that was raised was whether this would affect someone choosing to accept a job.  I think that’s a choice for them to make.  PASS is clearly stating its intent that only two directors from any one organization should serve at any time.  Once these bylaws are approved, this policy should not come as a surprise to any potential or current Board members considering a job change.  This clause isn’t perfect.  The biggest hole is business relationships that aren’t defined above.  Let’s say that two employees from company “X” serve on the Board.  What happens if I accept a full-time consulting contract with that company?  Let’s assume I’m working directly for one of the two existing Board members.  That doesn’t violate section VI.3.  But I think it’s clearly the kind of relationship we’d like to prevent.  Unfortunately that was even harder to write than what we have now.  I fully expect that in the next revision of the bylaws we’ll address this.  It just didn’t make it into this one. Officer Elections The officer election process received a slightly different rewrite.  Our goal was to codify in the bylaws the actual process we used to elect the officers.  The officers are the President, Executive Vice-President (EVP) and Vice-President of Marketing.  The Immediate Past President (IPP) is also an officer but isn’t elected.  The IPP serves in that role for two years after completing their term as President.  We do that for continuity’s sake.  Some organizations have a President-elect that serves for one or two years.  The group that founded PASS chose to have an IPP. When I started on the Board, the Nominating Committee (NomCom) selected the slate for the at-large directors and the slate for the officers.  There was always one candidate for each officer position.  It wasn’t really an election so much as the NomCom decided who the next person would be for each officer position.  Behind the scenes the Board worked to select the best people for the role. In June 2009 that process was changed to bring it line with what actually happens.  An Officer Appointment Committee was created that was a subset of the Board.  That committee would take time to interview the candidates and present a slate to the Board for approval.  The majority vote of the Board would determine the officers for the next two years.  In practice the Board itself interviewed the candidates and conducted the elections.  That means it was time to change the bylaws again. Section VII.2 and VII.3 spell out the process used to select the officers.  We use the phrase “Officer Appointment” to separate it from the Director election but the end result is that the Board elects the officers.  Section VII.3 starts: Officers shall be appointed bi-annually by a majority of all the voting members of the Board of Directors. Everything else revolves around that sentence.  We use the word appoint but they truly are elected.  There are details in the bylaws for term limits, minimum requirements for President (1 prior term as an officer), tie breakers and filling vacancies. In practice we will have an election for President, then an election for EVP and then an election for VP Marketing.  That means that losing candidates will be able to fall down the ladder and run for the next open position.  Another point to note is that officers aren’t at-large directors.  That means if a current sitting officer loses all three elections they are off the Board.  Having Board member votes public will help with the transparency of this approach. This process has a number of positive and negatives.  The biggest concern I expect to hear is that our members don’t directly choose the officers.  I’m going to try and list all the positives and negatives of this approach. Many non-profits value continuity and are slower to change than a business.  On the plus side this promotes that.  On the negative side this promotes that.  If we change too slowly the members complain that we aren’t responsive.  If we change too quickly we make mistakes and fail at various things.  We’ve been criticized for both of those lately so I’m not entirely sure where to draw the line.  My rough assumption to this point is that we’re going too slow on governance and too quickly on becoming “more than a Summit.”  This approach creates competition in the officer elections.  If you are an at-large director there is no consequence to losing an election.  If you are an officer the only way to stay on the Board is to win an officer election or an at-large election.  If you are an officer and lose an election you can always run for the next office down.  This makes it very easy for multiple people to contest an election. There is value in a person moving through the officer positions up to the Presidency.  Having the Board select the officers promotes this.  The down side is that it takes a LOT of time to get to the Presidency.  We’ve had good people struggle with burnout.  We’ve had lots of discussion around this.  The process as we’ve described it here makes it possible for someone to move quickly through the ranks but doesn’t prevent people from working their way up through each role. We talked long and hard about having the officers elected by the members.  We had a self-imposed deadline to complete these changes prior to elections this summer. The other challenge was that our original goal was to make the bylaws reflect our actual process rather than create a new one.  I believe we accomplished this goal. We ran out of time to consider this option in the detail it needs.  Having member elections for officers needs a number of problems solved.  We would need a way for candidates to fall through the election.  This is what promotes competition.  Without this few people would risk an election and we’ll be back to one candidate per slot.  We need to do this without having multiple elections.  We may be able to copy what other organizations are doing but I was surprised at how little I could find on other organizations.  We also need a way for people that lose an officer election to win an at-large election.  Otherwise we’ll have very little competition for officers. This brings me to an area that I think we as a Board haven’t done a good job.  We haven’t built a strong process to tell you who is doing a good job and who isn’t.  This is a double-edged sword.  I don’t want to highlight Board members that are failing.  That’s not a good way to get people to volunteer and run for the Board.  But I also need a way let the members make an informed choice about who is doing a good job and would make a good officer.  Encouraging Board members to blog, publishing minutes and making votes public helps in that regard but isn’t the final answer.  I don’t know what the final answer is yet.  I do know that the Board members themselves are uniquely positioned to know which other Board members are doing good work.  They know who speaks up in meetings, who works to build consensus, who has good ideas and who works with the members.  What I Could Do Better I’ve learned a lot writing this about how we communicated with our members.  The next time we revise the bylaws I’d do a few things differently.  The biggest change would be to provide better documentation.  The March 2009 minutes provide a very detailed look into what changes we wanted to make to the bylaws.  Looking back, I’m a little surprised at how closely they matched our final changes and covered the various arguments.  If you just read those you’d get 90% of what we eventually changed.  Nearly everything else was just details around implementation.  I’d also consider publishing a scope document defining exactly what we were doing any why.  I think it really helped that we had a limited, defined goal in mind.  I don’t think we did a good job communicating that goal outside the meeting minutes though. That said, I wish I’d blogged more after the August and January meeting.  I think it would have helped more people to know that this change was coming and to be ready for it. Conclusion These changes address two big concerns that the Board had.  First, it prevents a single organization from dominating the Board.  Second, it codifies and clearly spells out how officers are elected.  This is the process that was previously followed but it was somewhat murky.  These changes bring clarity to this and clearly explain the process the Board will follow. We’re going to listen to feedback until March 31st.  At that time we’ll decide whether to approve these changes.  I’m also assuming that we’ll start another round of changes in the next year or two.  Are there other issues in the bylaws that we should tackle in the future?

    Read the article

  • EFMVC Migrated to .NET 4.5, Visual Studio 2012, ASP.NET MVC 4 and EF 5 Code First

    - by shiju
    I have just migrated my EFMVC app from .NET 4.0 and ASP.NET MVC 4 RC to .NET 4.5, ASP.NET MVC 4 RTM and Entity Framework 5 Code First. In this release, the EFMVC solution is built with Visual Studio 2012 RTM. The migration process was very smooth and did not made any major changes other than adding simple unit tests with NUnit and Moq. I will add more unit tests on later and will also modify the existing solution. Source Code You can download the source code from http://efmvc.codeplex.com/

    Read the article

  • Amazon Web Services promet de baisser ses prix en 2012, entretien avec Matt Wood, Technology Evangelist EMEA chez Amazon

    Amazon Web Services promet de baisser encore ses prix en 2012 Entretien avec Matt Wood, Technology Evangelist EMEA chez Amazon Les Cloud dédiés aux développeurs se multiplient. Ils mettent tous en avant les mêmes avantages : flexibilité, facturation à la demande, gestion externalisée de l'infrastructure, et aujourd'hui simplification des outils d'administration. Après avoir interviewé Laurent Lesaicherre, le responsable chez Microsoft France de la plateforme Windows Azure, il nous est apparu intéressant de continuer ce tour d'horizon du marché avec un de ses précurseurs : Amazon. Il y a maintenant cinq ans, ...

    Read the article

  • En direct des Qt DevDays 2012 : keynote de Lars Knoll sur les objectifs du Qt Project et Qt 5

    Bonjour à tous, Actuellement, je suis à Berlin, au Cafe Moskau pour assister aux Qt DevDays 2012. Comme chaque année, la première journée est réservée aux formations. J'assiste à la formation appelée "Modern OpenGL with Qt5" réalisée par Sean Harmer de KDAB. Nous avons passé les deux heures de la matinée à voir la création et l'initialisation d'une fenêtre OpenGL dans Qt 5 (il y a quelques changements mineurs par rapport à Qt 4) et l'affichage d'un joli triangle en OpenGL moderne.

    Read the article

  • PASS Summit – looking back on my first time

    - by Fatherjack
      So I was lucky enough to get my first experience of PASS Summit this year and took some time beforehand to read some blogs and reference material to get an idea on what to do and how to get the best out of my visit. Having been to other conferences – technical and non-technical – I had a reasonable idea on the routine and what to expect in general. Here is a list of a few things that I have learned/remembered as the week has gone by. Wear comfortable shoes. This actually needs to be broadened to Take several pairs of comfortable shoes. You will be spending many many hours, for several days one after another. Having comfortable feet that can literally support you for the duration will make the week in general a whole lot better. Not only at the conference but getting to and from you could well be walking. In the evenings you will be walking around town and standing talking in various bars and clubs. Looking back, on some days I was on my feet for over 20 hours. Make friends. This is a given for the long term benefits it brings but there is also an immediate reward in being at a conference with a friend or two. Some events are bigger and more popular than others and some have the type of session that every single attendee will want to be in. This is great for those that get in but if you are in the bathroom or queuing for coffee and you miss out it sucks. Having a friend that can get in to a room and reserve you a seat is a great advantage to make sure you get the content that you want to see and still have the coffee that you need. Don’t go to every session you want to see This might sound counter intuitive and it relies on the sessions being recorded in some way to guarantee you don’t totally miss out. Both PASS Summit and SQL Bits sessions are recorded (summit is audio, SQLBits is video) and this means that if you get into a good conversation with someone over a coffee you don’t have to break it up to go to a session. Obviously there is a trade-off here and you need to decide on the tipping point for yourself but a conversation at a place like this could make a big difference to the next contract or employer you have or it might simply be great catching up with some friends you don’t see so often. Go to at least one session you don’t want to Again, this will seem to be contrary to normal logic but there is no reason why you shouldn’t learn about a part of SQL Server that isn’t part of your daily routine. Not only will you learn something new but you will also pick up on the feelings and attitudes of the people in the session. So, if you are a DBA, head off to a BI session and so on. You’ll hear BI speakers speaking to a BI audience and get to understand their point of view and reasoning for making the decisions they do. You will also appreciate the way that your decisions and instructions affect the way they have to work. This will help you a lot when you are on a project, working with multiple teams and make you all more productive. Socialise While you are at the conference venue, speak to people. Ask questions, be interested in whoever you are speaking to. You get chances to talk to new friends at breakfast, dinner and every break between sessions. The only people that might not talk to you would be speakers that are about to go and give a session, in most cases speakers like peace and quiet before going on stage. Other than that the people around you are just waiting for someone to talk to them so make the first move. There is a whole lot going on outside of the conference hours and you should make an effort to join in with some of this too. At karaoke evenings or just out for a quiet drink with a few of the people you meet at the conference. Either way, don’t be a recluse and hide in your room or be alone out in the town. Don’t talk to people Once again this sounds wrong but stay with me. I have spoken to a number of speakers since Summit 2013 finished and they have all mentioned the time it has taken them to move about the conference venue due to people stopping them for a chat or to ask a question. 45 minutes to walk from a session room to the speaker room in one case. Wow. While none of the speakers were upset about this sort of delay I think delegates should take the situation into account and possibly defer their question to an email or to a time when the person they want is clearly less in demand. Give them a chance to enjoy the conference in the same way that you are, they may actually want to go to a session or just have a rest after giving their session – talking for 75 minutes is hard work, taking an extra 45 minutes right after is unbelievable. I certainly hope that they get good feedback on their sessions and perhaps if you spoke to a speaker outside a session you can give them a mention in the ‘any other comments’ part of the feedback, just to convey your gratitude for them giving up their time and expertise for free. Say thank you I just mentioned giving the speakers a clear, visible ‘thank you’ in the feedback but there are plenty of people that help make any conference the success it is that would really appreciate hearing that their efforts are valued. People on the registration desk, volunteers giving schedule guidance and directions, people on the community zone are all volunteers giving their time to help you have the best experience possible. Send an email to PASS and convey your thoughts about the work that was done. Maybe you want to be a volunteer next time so you could enquire how you get into that position at the same time. This isn’t an exclusive list and you may agree or disagree with the points I have made, please add anything you think is good advice in the comments. I’d like to finish by saying a huge thank you to all the people involved in planning, facilitating and executing the PASS Summit 2013, it was an excellent event and I know many others think it was a totally worthwhile event to attend.

    Read the article

  • MicroTraining: Managing SSIS Connections–10 Apr 2012 at 10:00 AM EDT!

    - by andyleonard
    I am pleased to announce another free Linchpin People MicroTraining Event! On Tuesday, 10 Apr 2012 at 10:00 AM EDT, I will present Managing SSIS Connections . In this presentation, I will show you several means for managing SSIS connectivity using built-in functionality and a custom trick or two I picked up over the past few years. Want to learn more? It’s free (and no phone number required)! Register today. :{>...(read more)

    Read the article

  • Oracle OpenWorld 2012 konferencia 9 nap múlva kezdodik, 09.30.-10.04.

    - by user645740
    San Franciscoban nemsokára elkezdodik a 2012. évi Oracle OpenWorld konferencia:http://www.oracle.com/openworld/. Rengeteg érdekes keynote, eloadás, demó, stb található a programban. Oracle OpenWorld keynote eloadások: http://www.oracle.com/openworld/keynotes/ Az Oracle OpenWorld-ön gyakran fontos bejelentések is elhangzanak, kíváncsian várom az idei újdonságokat! Továbbra is kulcsszavak: Cloud - felho Hardware and Software, Engineered to Work Together Engineered Systems A komplexitás csökkentése Business Analytics (üzleti intelligencia és barátai nagyobb keretben) Fusion Applications

    Read the article

  • L'ICANN approuve la création de nouvelles extensions de noms de domaines génériques et personnalisés à partir du 12 janvier 2012

    L'ICANN approuve la création de nouvelles extensions de noms de domaines génériques personnalisés A partir du 12 janvier 2012 Avec grafikm_fr C'est à Singapour que l'ICANN (Internet Corporation for Assigned Names and Numbres ) vient d'annoncer son accord pour la création de nouveaux noms domaines génériques de premier niveau (GTLD). Ces noms de domaines de premier niveau sont actuellement au nombre de 23, auxquels s'ajoutent près de 250 extensions correspondant chacune à des pays. Ce nouveau programme de l'ICANN permettra la création de nouveaux noms personnalisés pouvant s'achever par exemple avec des suffixes comme .auto (ou avec...

    Read the article

  • En direct des Qt DevDays 2012 : compte-rendu de la formation sur l'OpenGL moderne avec Qt 5

    Bonjour à tous, Actuellement, je suis à Berlin, au Cafe Moskau pour assister aux Qt DevDays 2012. Comme chaque année, la première journée est réservée aux formations. J'assiste à la formation appelée "Modern OpenGL with Qt5" réalisée par Sean Harmer de KDAB. Nous avons passé les deux heures de la matinée à voir la création et l'initialisation d'une fenêtre OpenGL dans Qt 5 (il y a quelques changements mineurs par rapport à Qt 4) et l'affichage d'un joli triangle en OpenGL moderne.

    Read the article

  • SAP France enchaîne les bons trimestres financiers, continue son virage vers le Cloud et se montre confiant pour 2012

    SAP France enchaîne les bons trimestres financiers Continue son virage vers le Cloud et se montre confiant pour 2012 SAP France vient d'enchaîner un 5ème trimestre de croissance consécutif (le 7ème pour SAP dans son ensmble). L'éditeur allemand enregistre même le meilleur troisième trimestre fiscal de toute son histoire. Ces très bonnes performances ont été l'occasion pour Nicolas Sekkaki, Directeur Général de la branche française, de revenir sur les évolutions en cours et sur la crise qui s'annonce. Depuis le rachat de Business Object, SAP ne cesse de le répéter : il n'est plus seulem...

    Read the article

  • En direct des Qt DevDays 2012 : compte-rendu sur la création de compositeurs avec le module Qt Wayland

    Bonjour à tous, Actuellement, je suis à Berlin, au Cafe Moskau pour assister aux Qt DevDays 2012. Comme chaque année, la première journée est réservée aux formations. J'assiste à la formation appelée "Modern OpenGL with Qt5" réalisée par Sean Harmer de KDAB. Nous avons passé les deux heures de la matinée à voir la création et l'initialisation d'une fenêtre OpenGL dans Qt 5 (il y a quelques changements mineurs par rapport à Qt 4) et l'affichage d'un joli triangle en OpenGL moderne.

    Read the article

  • E3 2012 : Du nouveau pour la XBox 360 : l'application Smart Glass, Internet Explorer et XBox Music débarqueront cette année

    E3 2012 : Des nouveautés pour la XBox 360 Smart Glass, Internet Explorer et Music Smart GlassIl faut dire que pour l'instant, peu de choses ont été dévoilées à propos de Smart Glass. Sous ce nom se cache une application pour Windows 8, Windows Phone mais aussi les périphériques sous iOS afin de les utiliser comme contrôleur pour la XBox. La technologie permettra d'utiliser son PC, sa tablette ou son smartphone, pour afficher l'image mais aussi pour contrôler la XBox, donnant ainsi une meilleure interface utilisateur pour des applications comme Internet Explorer. De plus, The Verge

    Read the article

  • E3 2012 : Square Enix dévoile "Luminous Studio ", son nouveau moteur de rendu, avec une vidéo rappelant l'univers de Final Fantasy

    E3 2012 : Square Enix dévoile "Luminous Studio " son nouveau moteur de rendu Une première démonstration dans la lignée des Final Fantasy Il y a sept mois, Square Enix avait présenté un nouveau moteur à la presse japonaise. Ce moteur vise les consoles à venir (XBox 720 / PS4). Voici les images qui avaient été présentées : [IMG]http://jeux.developpez.com/news/images/Luminous_Studio_1_thumb.jpg[/IMG] [IMG]http://jeux.developpez.com/news/images/Luminous_Studio_2_thumb.jpg[/IMG] Le développe...

    Read the article

  • Imagine Cup 2012 : les espoirs français de la 10ème finale du concours de Microsoft, l'Afrique francophone aligne six représentants

    Imagine Cup 2012 : les quatre espoirs français de la 10ème finale Du concours de Microsoft, l'Afrique francophone aligne six représentants Créé en 2002, Imagine Cup permet à des étudiants du monde entier de « s'affronter » pour révéler leur potentiel créatif et entrepreneurial avec une mission : répondre à un ou plusieurs des « Objectifs du Millénaire pour le Développement », adoptés par les Nations-Unies (à savoir « imaginer un monde où la technologie nous aide à répondre aux enjeux les plus cruciaux de notre société »). [IMG]http://ftp-developpez.com/gordon-fowler/ImagineCup20121.png[/IMG] Cette année, 4 équipes défendront les couleurs de la France lors de la finale...

    Read the article

  • Windows 8 Embedded preview sera publié au premier trimestre 2012, la version finale disponible trois mois après la sortie de Windows 8

    Windows 8 Embedded : la préversion de l'OS sera publiée au premier trimestre 2012 La version finale sera disponible trois trimestres après la sortie de Windows 8 Microsoft prévoit de mettre à la disposition des développeurs une préversion de Windows 8 Embedded, son OS pour l'embarqué pendant le premier trimestre de l'année prochaine. La prochaine version du système sera développée suivant une approche plus agile, ciblée et moins monolithique. Elle a pour vocation d'étendre les solutions d'entreprises et les services Cloud aux appareils de la vie quotidienne, tels que les terminaux de points de service, les systèmes d'info loisirs automobiles, les équipements médicaux, les machines...

    Read the article

  • Migration Guide: Migrating to SQL Server 2012 Failover Clustering and Availability Groups from Prior Clustering and Mirroring Deployments

    This paper provides guidance for customers who prior to SQL Server 2012 have deployed SQL Failover Clustering for local high availability and database mirroring for disaster recovery, and who want to migrate to SQL Server AlwaysOn. It describes the corresponding SQL Server AlwaysOn scenario and the migration paths to SQL Server AlwaysOn. It also contains the important knowledge and considerations that you must know in order to successfully migrate to a HADR solution based on SQL Server AlwaysOn technology, which implements AlwaysOn Failover Cluster Instances for high availability and AlwaysOn Availability Groups for disaster recovery.

    Read the article

  • PASS Summit 2013 Review

    - by Ajarn Mark Caldwell
    As a long-standing member of PASS who lives in the greater Seattle area and has attended about nine of these Summits, let me start out by saying how GREAT it was to go to Charlotte, North Carolina this year.  Many of the new folks that I met at the Summit this year, upon hearing that I was from Seattle, commented that I must have been disappointed to have to travel to the Summit this year after 5 years in a row in Seattle.  Well, nothing could be further from the truth.  I cheered loudly when I first heard that the 2013 Summit would be outside Seattle.  I have many fond memories of trips to Orlando, Florida and Grapevine, Texas for past Summits (missed out on Denver, unfortunately).  And there is a funny dynamic that takes place when the conference is local.  If you do as I have done the last several years and saved my company money by not getting a hotel, but rather just commuting from home, then both family and coworkers tend to act like you’re just on a normal schedule.  For example, I have a young family, and my wife and kids really wanted to still see me come home “after work”, but there are a whole lot of after-hours activities, social events, and great food to be enjoyed at the Summit each year.  Even more so if you really capitalize on the opportunities to meet face-to-face with people you either met at previous summits or have spoken to or heard of, from Twitter, blogs, and forums.  Then there is also the lovely commuting in Seattle traffic from neighboring cities rather than the convenience of just walking across the street from your hotel.  So I’m just saying, there are really nice aspects of having the conference 2500 miles away. Beyond that, the training was fantastic as usual.  The SQL Server community has many outstanding presenters and experts with deep knowledge of the tools who are extremely willing to share all of that with anyone who wants to listen.  The opening video with PASS President Bill Graziano in a NASCAR race turned dream sequence was very well done, and the keynotes, as usual, were great.  This year I was particularly impressed with how well attended were the Professional Development sessions.  Not too many years ago, those were very sparsely attended, but this year, the two that I attended were standing-room only, and these were not tiny rooms.  I would say this is a testament to both the maturity of the attendees realizing how important these topics are to career success, as well as to the ever-increasing skills of the presenters and the program committee for selecting speakers and topics that resonated with people.  If, as is usually the case, you were not able to get to every session that you wanted to because there were just too darn many good ones, I encourage you to get the recordings. Overall, it was a great time as these events always are.  It was wonderful to see old friends and make new ones, and the people of Charlotte did an awesome job hosting the event and letting their hospitality shine (extra kudos to SQLSentry for all they did with the shuttle, maps, and other event sponsorships).  We’re back in Seattle next year (it is a release year, after all) but I would say that with the success of this year’s event, I strongly encourage the Board and PASS HQ to firmly reestablish the location rotation schedule.  I’ll even go so far as to suggest standardizing on an alternating Seattle – Charlotte schedule, or something like that. If you missed the Summit this year, start saving now, and register early, so you can join us!

    Read the article

  • PASS Summit 2011 &ndash; Part I

    - by Tara Kizer
    What an amazing week I had at PASS Summit 2011 in Seattle, WA!  I hadn’t attended a PASS conference since September of 2005 when it was in Grapevine, Texas.  It has grown so much since then.  I am not sure how many people attended back then, but I’d guesstimate about 1500.  They announced that at this year’s conference there were 4000 attendees.  WOW! Here are my favorite aspects of this conference: Networking! – Not only did I meet a lot of new people, but I also got to meet people in person that I’ve known on the Internet for years like Mladen Prajdic (blog|twitter) and Rob Volk (blog|twitter).  I even met someone that I’d recently helped out in the SQLTeam forums.  Learning – I took a lot of notes during the sessions I attended and plan on blogging very soon about them.  It is amazing the amount of things you learn and the things that you unlearn.  Yes I said unlearn.  Some of the stuff that I thought I knew was either out-dated or just plain wrong.  Fun, fun, fun – To say that this conference was fun would be an understatement.  I had a blast!  I attended the “Welcome Reception and Quizbowl” on Tuesday night, the “Exhibitor Reception” on Wednesday night, and the “Community Appreciation Party” at GameWorks on Thursday night.  There were many other after-hours events to attend, but I had to make my kids a priority at night so I had to get back to my hotel room before 9pm so that I could Skype with them.   It was very entertaining reading and posting with #sqlpass on Twitter.  Twitter has changed the conference experience for the better.  I will definitely be able to do my job better due to attending this conference.  The return on investment is HUGE!

    Read the article

  • Partitioned Repository for WebCenter Content using Oracle Database 11g

    - by Adao Junior
    One of the biggest challenges for content management solutions is related to the storage management due the high volumes of the unstoppable growing of information. Even if you have storage appliances and a lot of terabytes, thinks like backup, compression, deduplication, storage relocation, encryption, availability could be a nightmare. One standard option that you have with the Oracle WebCenter Content is to store data to the database. And the Oracle Database allows you leverage features like compression, deduplication, encryption and seamless backup. But with a huge volume, the challenge is passed to the DBA to keep the WebCenter Content Database up and running. One solution is the use of DB partitions for your content repository, but what are the implications of this? Can I fit this with my business requirements? Well, yes. It’s up to you how you will manage that, you just need a good plan. During you “storage brainstorm plan” take in your mind what you need, such as storage petabytes of documents? You need everything on-line? There’s a way to logically separate the “good content” from the “legacy content”? The first thing that comes to my mind is to use the creation date of the document, but you need to remember that this document could receive a lot of revisions and maybe you can consider the revision creation date. Your plan can have also complex rules like per Document Type or per a custom metadata like department or an hybrid per date, per DocType and an specific virtual folder. Extrapolation the use, you can have your repository distributed in different servers, different disks, different disk types (Such as ssds, sas, sata, tape,…), separated accordingly your business requirements, separating the “hot” content from the legacy and easily matching your compliance requirements. If you think to use by revision, the simple way is to consider the dId, that is the sequential unique id for every content created using the WebCenter Content or the dLastModified that is the date field of the FileStorage table that contains the date of inclusion of the content to the DB Table using SecureFiles. Using the scenario of partitioned repository using an hierarchical separation by date, we will transform the FileStorage table in an partitioned table using  “Partition by Range” of the dLastModified column (You can use the dId or a join with other tables for other metadata such as dDocType, Security, etc…). The test scenario bellow covers: Previous existent data on the JDBC Storage to be migrated to the new partitioned JDBC Storage Partition by Date Automatically generation of new partitions based on a pre-defined interval (Available only with Oracle Database 11g+) Deduplication and Compression for legacy data Oracle WebCenter Content 11g PS5 (Could present some customizations that do not affect the test scenario) For the test case you need some data stored using JDBC Storage to be the “legacy” data. If you do not have done before, just create an Storage rule pointed to the JDBC Storage: Enable the metadata StorageRule in the UI and upload some documents using this rule. For this test case you can run using the schema owner or an dba user. We will use the schema owner TESTS_OCS. I can’t forgot to tell that this is just a test and you should do a proper backup of your environment. When you use the schema owner, you need some privileges, using the dba user grant the privileges needed: REM Grant privileges required for online redefinition. GRANT EXECUTE ON DBMS_REDEFINITION TO TESTS_OCS; GRANT ALTER ANY TABLE TO TESTS_OCS; GRANT DROP ANY TABLE TO TESTS_OCS; GRANT LOCK ANY TABLE TO TESTS_OCS; GRANT CREATE ANY TABLE TO TESTS_OCS; GRANT SELECT ANY TABLE TO TESTS_OCS; REM Privileges required to perform cloning of dependent objects. GRANT CREATE ANY TRIGGER TO TESTS_OCS; GRANT CREATE ANY INDEX TO TESTS_OCS; In our test scenario we will separate the content as Legacy, Day1, Day2, Day3 and Future. This last one will partitioned automatically using 3 tablespaces in a round robin mode. In a real scenario the partition rule could be per month, per year or any rule that you choose. Table spaces for the test scenario: CREATE TABLESPACE TESTS_OCS_PART_LEGACY DATAFILE 'tests_ocs_part_legacy.dat' SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_DAY1 DATAFILE 'tests_ocs_part_day1.dat' SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_DAY2 DATAFILE 'tests_ocs_part_day2.dat' SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_DAY3 DATAFILE 'tests_ocs_part_day3.dat' SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_ROUND_ROBIN_A 'tests_ocs_part_round_robin_a.dat' DATAFILE SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_ROUND_ROBIN_B 'tests_ocs_part_round_robin_b.dat' DATAFILE SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_ROUND_ROBIN_C 'tests_ocs_part_round_robin_c.dat' DATAFILE SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; Before start, gather optimizer statistics on the actual FileStorage table: EXEC DBMS_STATS.GATHER_TABLE_STATS(USER, 'FileStorage', cascade => TRUE); Now check if is possible execute the redefinition process: EXEC DBMS_REDEFINITION.CAN_REDEF_TABLE('TESTS_OCS', 'FileStorage',DBMS_REDEFINITION.CONS_USE_PK); If no errors messages, you are good to go. Create a Partitioned Interim FileStorage table. You need to create a new table with the partition information to act as an interim table: CREATE TABLE FILESTORAGE_Part ( DID NUMBER(*,0) NOT NULL ENABLE, DRENDITIONID VARCHAR2(30 CHAR) NOT NULL ENABLE, DLASTMODIFIED TIMESTAMP (6), DFILESIZE NUMBER(*,0), DISDELETED VARCHAR2(1 CHAR), BFILEDATA BLOB ) LOB (BFILEDATA) STORE AS SECUREFILE ( ENABLE STORAGE IN ROW NOCACHE LOGGING KEEP_DUPLICATES NOCOMPRESS ) PARTITION BY RANGE (DLASTMODIFIED) INTERVAL (NUMTODSINTERVAL(1,'DAY')) STORE IN (TESTS_OCS_PART_ROUND_ROBIN_A, TESTS_OCS_PART_ROUND_ROBIN_B, TESTS_OCS_PART_ROUND_ROBIN_C) ( PARTITION FILESTORAGE_PART_LEGACY VALUES LESS THAN (TO_DATE('05-APR-2012 12.00.00 AM', 'DD-MON-YYYY HH.MI.SS AM')) TABLESPACE TESTS_OCS_PART_LEGACY LOB (BFILEDATA) STORE AS SECUREFILE ( TABLESPACE TESTS_OCS_PART_LEGACY RETENTION NONE DEDUPLICATE COMPRESS HIGH ), PARTITION FILESTORAGE_PART_DAY1 VALUES LESS THAN (TO_DATE('06-APR-2012 07.25.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) TABLESPACE TESTS_OCS_PART_DAY1 LOB (BFILEDATA) STORE AS SECUREFILE ( TABLESPACE TESTS_OCS_PART_DAY1 RETENTION AUTO KEEP_DUPLICATES COMPRESS ), PARTITION FILESTORAGE_PART_DAY2 VALUES LESS THAN (TO_DATE('06-APR-2012 07.55.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) TABLESPACE TESTS_OCS_PART_DAY2 LOB (BFILEDATA) STORE AS SECUREFILE ( TABLESPACE TESTS_OCS_PART_DAY2 RETENTION AUTO KEEP_DUPLICATES NOCOMPRESS ), PARTITION FILESTORAGE_PART_DAY3 VALUES LESS THAN (TO_DATE('06-APR-2012 07.58.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) TABLESPACE TESTS_OCS_PART_DAY3 LOB (BFILEDATA) STORE AS SECUREFILE ( TABLESPACE TESTS_OCS_PART_DAY3 RETENTION AUTO KEEP_DUPLICATES NOCOMPRESS ) ); After the creation you should see your partitions defined. Note that only the fixed range partitions have been created, none of the interval partition have been created. Start the redefinition process: BEGIN DBMS_REDEFINITION.START_REDEF_TABLE( uname => 'TESTS_OCS' ,orig_table => 'FileStorage' ,int_table => 'FileStorage_PART' ,col_mapping => NULL ,options_flag => DBMS_REDEFINITION.CONS_USE_PK ); END; This operation can take some time to complete, depending how many contents that you have and on the size of the table. Using the DBA user you can check the progress with this command: SELECT * FROM v$sesstat WHERE sid = 1; Copy dependent objects: DECLARE redefinition_errors PLS_INTEGER := 0; BEGIN DBMS_REDEFINITION.COPY_TABLE_DEPENDENTS( uname => 'TESTS_OCS' ,orig_table => 'FileStorage' ,int_table => 'FileStorage_PART' ,copy_indexes => DBMS_REDEFINITION.CONS_ORIG_PARAMS ,copy_triggers => TRUE ,copy_constraints => TRUE ,copy_privileges => TRUE ,ignore_errors => TRUE ,num_errors => redefinition_errors ,copy_statistics => FALSE ,copy_mvlog => FALSE ); IF (redefinition_errors > 0) THEN DBMS_OUTPUT.PUT_LINE('>>> FileStorage to FileStorage_PART temp copy Errors: ' || TO_CHAR(redefinition_errors)); END IF; END; With the DBA user, verify that there's no errors: SELECT object_name, base_table_name, ddl_txt FROM DBA_REDEFINITION_ERRORS; *Note that will show 2 lines related to the constrains, this is expected. Synchronize the interim table FileStorage_PART: BEGIN DBMS_REDEFINITION.SYNC_INTERIM_TABLE( uname => 'TESTS_OCS', orig_table => 'FileStorage', int_table => 'FileStorage_PART'); END; Gather statistics on the new table: EXEC DBMS_STATS.GATHER_TABLE_STATS(USER, 'FileStorage_PART', cascade => TRUE); Complete the redefinition: BEGIN DBMS_REDEFINITION.FINISH_REDEF_TABLE( uname => 'TESTS_OCS', orig_table => 'FileStorage', int_table => 'FileStorage_PART'); END; During the execution the FileStorage table is locked in exclusive mode until finish the operation. After the last command the FileStorage table is partitioned. If you have contents out of the range partition, you should see the new partitions created automatically, not generating an error if you “forgot” to create all the future ranges. You will see something like: You now can drop the FileStorage_PART table: border-bottom-width: 1px; border-bottom-style: solid; text-align: left; border-left-color: silver; border-left-width: 1px; border-left-style: solid; padding-bottom: 4px; line-height: 12pt; background-color: #f4f4f4; margin-top: 20px; margin-right: 0px; margin-bottom: 10px; margin-left: 0px; padding-left: 4px; width: 97.5%; padding-right: 4px; font-family: 'Courier New', Courier, monospace; direction: ltr; max-height: 200px; font-size: 8pt; overflow-x: auto; overflow-y: auto; border-top-color: silver; border-top-width: 1px; border-top-style: solid; cursor: text; border-right-color: silver; border-right-width: 1px; border-right-style: solid; padding-top: 4px; " id="codeSnippetWrapper"> DROP TABLE FileStorage_PART PURGE; To check the FileStorage table is valid and is partitioned, use the command: SELECT num_rows,partitioned FROM user_tables WHERE table_name = 'FILESTORAGE'; You can list the contents of the FileStorage table in a specific partition, per example: SELECT * FROM FileStorage PARTITION (FILESTORAGE_PART_LEGACY) Some useful commands that you can use to check the partitions, note that you need to run using a DBA user: SELECT * FROM DBA_TAB_PARTITIONS WHERE table_name = 'FILESTORAGE';   SELECT * FROM DBA_TABLESPACES WHERE tablespace_name like 'TESTS_OCS%'; After the redefinition process complete you have a new FileStorage table storing all content that has the Storage rule pointed to the JDBC Storage and partitioned using the rule set during the creation of the temporary interim FileStorage_PART table. At this point you can test the WebCenter Content downloading the documents (Original and Renditions). Note that the content could be already in the cache area, take a look in the weblayout directory to see if a file with the same id is there, then click on the web rendition of your test file and see if have created the file and you can open, this means that is all working. The redefinition process can be repeated many times, this allow you test what the better layout, over and over again. Now some interesting maintenance actions related to the partitions: Make an tablespace read only. No issues viewing, the WebCenter Content do not alter the revisions When try to delete an content that is part of an read only tablespace, an error will occurs and the document will not be deleted The only way to prevent errors today is creating an custom component that checks the partitions and if you have an document in an “Read Only” repository, execute the deletion process of the metadata and mark the document to be deleted on the next db maintenance, like a new redefinition. Take an tablespace off-line for archiving purposes or any other reason. When you try open an document that is included in this tablespace will receive an error that was unable to retrieve the content, but the others online tablespaces are not affected. Same behavior when deleting documents. Again, an custom component is the solution. If you have an document “out of range”, the component can show an message that the repository for that document is offline. This can be extended to a option to the user to request to put online again. Moving some legacy content to an offline repository (table) using the Exchange option to move the content from one partition to a empty nonpartitioned table like FileStorage_LEGACY. Note that this option will remove the registers from the FileStorage and will not be able to open the stored content. You always need to keep in mind the indexes and constrains. An redefinition separating the original content (vault) from the renditions and separate by date ate the same time. This could be an option for DAM environments that want to have an special place for the renditions and put the original files in a storage with less performance. The process will be the same, you just need to change the script of the interim table to use composite partitioning. Will be something like: CREATE TABLE FILESTORAGE_RenditionPart ( DID NUMBER(*,0) NOT NULL ENABLE, DRENDITIONID VARCHAR2(30 CHAR) NOT NULL ENABLE, DLASTMODIFIED TIMESTAMP (6), DFILESIZE NUMBER(*,0), DISDELETED VARCHAR2(1 CHAR), BFILEDATA BLOB ) LOB (BFILEDATA) STORE AS SECUREFILE ( ENABLE STORAGE IN ROW NOCACHE LOGGING KEEP_DUPLICATES NOCOMPRESS ) PARTITION BY LIST (DRENDITIONID) SUBPARTITION BY RANGE (DLASTMODIFIED) ( PARTITION Vault VALUES ('primaryFile') ( SUBPARTITION FILESTORAGE_VAULT_LEGACY VALUES LESS THAN (TO_DATE('05-APR-2012 12.00.00 AM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_VAULT_DAY1 VALUES LESS THAN (TO_DATE('06-APR-2012 07.25.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_VAULT_DAY2 VALUES LESS THAN (TO_DATE('06-APR-2012 07.55.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_VAULT_DAY3 VALUES LESS THAN (TO_DATE('06-APR-2012 07.58.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_VAULT_FUTURE VALUES LESS THAN (MAXVALUE) ) ,PARTITION WebLayout VALUES ('webViewableFile') ( SUBPARTITION FILESTORAGE_WEBLAYOUT_LEGACY VALUES LESS THAN (TO_DATE('05-APR-2012 12.00.00 AM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_WEBLAYOUT_DAY1 VALUES LESS THAN (TO_DATE('06-APR-2012 07.25.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_WEBLAYOUT_DAY2 VALUES LESS THAN (TO_DATE('06-APR-2012 07.55.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_WEBLAYOUT_DAY3 VALUES LESS THAN (TO_DATE('06-APR-2012 07.58.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_WEBLAYOUT_FUTURE VALUES LESS THAN (MAXVALUE) ) ,PARTITION Special VALUES ('Special') ( SUBPARTITION FILESTORAGE_SPECIAL_LEGACY VALUES LESS THAN (TO_DATE('05-APR-2012 12.00.00 AM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_SPECIAL_DAY1 VALUES LESS THAN (TO_DATE('06-APR-2012 07.25.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_SPECIAL_DAY2 VALUES LESS THAN (TO_DATE('06-APR-2012 07.55.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_SPECIAL_DAY3 VALUES LESS THAN (TO_DATE('06-APR-2012 07.58.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_SPECIAL_FUTURE VALUES LESS THAN (MAXVALUE) ) )ENABLE ROW MOVEMENT; The next post related to partitioned repository will come with an sample component to handle the possible exceptions when you need to take off line an tablespace/partition or move to another place. Also, we can include some integration to the Retention Management and Records Management. Another subject related to partitioning is the ability to create an FileStore Provider pointed to a different database, raising the level of the distributed storage vs. performance. Let us know if this is important to you or you have an use case not listed, leave a comment. Cross-posted on the blog.ContentrA.com

    Read the article

  • PASS Summit 2010 Recap

    - by AjarnMark
    Last week I attended my eighth PASS Summit in nine years, and every year it is a fantastic event!  I was fortunate my first year to have a contact (Bill Graziano (blog | Twitter) from SQLTeam) that I was expecting to meet, and who got me started on a good track of making new contacts.  Each year I have made a few more, and renewed friendships from years past.  Many of the attendees agree that the pure networking opportunities are one of the best benefits of attending the Summit.  And there’s a lot of great technical stuff, too, some of the things that stick out for me this year include… Pre-Con Monday: PowerShell with Allen White (blog | Twitter).  This was the first time that I attended a pre-con.  For those not familiar with the concept, the regular sessions for the conference are 75-90 minutes long.  For an extra fee, you can attend a full-day session on a single topic during a pre- or post-conference training day.  I had been meaning for several months to dive in and learn PowerShell, but just never seemed to find (or make) the time for it, so when I saw this was one of the all-day sessions, and I was planning to be there on Monday anyway, I decided to go for it.  And it was well worth it!  I definitely came out of there with a good foundation to build my own PowerShell scripts, plus several sample scripts that he showed which already cover the first four or five things I was planning to do with PowerShell anyway.  This looks like the right tool for me to build an automated version of our software deployment process, which right now contains many repeated steps.  Thanks Allen! Service Broker with Denny Cherry (blog | Twitter).  I remembered reading Denny’s blog post on Using Service Broker instead of Replication, and ever since then I have been thinking about using this to populate a new reporting-focused Data Repository that we will be building in the near future.  When I saw he was doing this session, I thought it would be great to get more information and be able to ask the author questions.  When I brought this idea back to my boss, he really liked it, as we had previously been discussing doing nightly data loads, with an option to manually trigger a mid-day load if up-to-the-minute data was needed for something.  If we go the Service Broker route, we can keep the Repository current in near real-time.  Hooray! DBA Mythbusters with Paul Randal (blog | Twitter).  Even though I read every one of the posts in Paul’s blog series of the same name, I had to go see the legend in person.  It was great, and I still learned something new! How to Conduct Effective Meetings with Joe Webb (blog | Twitter).  I always like to sit in on a session that Joe does.  I met Joe several years ago when both he and Bill Graziano were on the PASS Board of Directors together, and we have kept in touch.  Joe is very well-spoken and has great experience with both SQL Server and business.  And we could certainly use some pointers at my work (probably yours, too) on making our meetings more effective and to run on-time.  Of course, now that I’m the Chapter Leader for the Professional Development virtual chapter, I also had to sit in on this ProfDev session and recruit Joe to do a presentation or two for the chapter next year. Query Optimization with David DeWitt.  Anyone who has seen Dr. David DeWitt present the 3rd keynote at a PASS Summit over the last three years knows what a great time it is to sit and listen to him make some really complicated and advanced topic easy to understand (although it still makes your head hurt).  It still amazes me that the simple two-table join query from pubs that he used in his example can possibly have 22 million possible physical query plans.  Ouch! Exhibit Hall:  This year I spent more serious time in the exhibit hall than any year past.  I have talked my boss into making a significant (for us) investment in monitoring tools next year, and this was a great opportunity to talk with all the big-hitters.  Readers of mine may recall that I fell in love with the SQL Sentry Power Suite several months ago and wrote a blog entry about it just from the trial version.  Well as things turned out, short-term budget priorities shifted, and we weren’t able to make the purchase then.  I have it in the budget for next year, but since I was going to the Summit, my boss wanted me to look at the other options to see if this was really the one that we wanted.  I spent a couple of hours talking with representatives from Red-Gate, Idera, Confio, and Quest about their offerings, and giving them each the same 3 scenarios that I wanted to be able to accomplish based on the questions and issues that arise in our company.  It was interesting to discover the different approaches or “world view” that each vendor takes to the subject of performance monitoring and troubleshooting.  I may write a separate article that goes into this in more depth, but the product that best aligned with our point of view, and met the current needs we have is still the SQL Sentry Power Suite.  I’m not saying that the others are bad or wrong or anything like that, just that the way they tackled the issue did not align as well with our particular needs as does SQL Sentry’s product.  And that was something I learned too, when you go shopping for these products, you really need to know what you want to get from them.  It’s best if you have a few example scenarios from work that you can use to test out how well each tool fits your particular needs. Overall, another GREAT event.  I can’t wait to get the DVDs so I can sit in on a bunch of other sessions that I couldn’t get to because I was in one of the ones above.  And I can hardly wait until next year!

    Read the article

  • 202 blog articles

    - by mprove
    All my blog articles under blogs.oracle.com since August 2005: 202 blog articles Apr 2012 blogs.oracle.com design patch Mar 2012 Interaction 12 - Critique Mar 2012 Typing. Clicking. Dancing. Feb 2012 Desktop Mobility in Hospitals with Oracle VDI /video Feb 2012 Interaction 12 in Dublin - Highlights of Day 3 Feb 2012 Interaction 12 in Dublin - Highlights of Day 2 Feb 2012 Interaction 12 in Dublin - Highlights of Day 1 Feb 2012 Shit Interaction Designers Say Feb 2012 Tips'n'Tricks for WebCenter #3: How to display custom page titles in Spaces Jan 2012 Tips'n'Tricks for WebCenter #2: How to create an Admin menu in Spaces and save a lot of time Jan 2012 Tips'n'Tricks for WebCenter #1: How to apply custom resources in Spaces Jan 2012 Merry XMas and a Happy 2012! Dec 2011 One Year Oracle SocialChat - The Movie Nov 2011 Frank Ludolph's Last Working Day Nov 2011 Hans Rosling at TED Oct 2011 200 Countries x 200 Years Oct 2011 Blog Aggregation for Desktop Virtualization Oct 2011 Oracle VDI at OOW 2011 Sep 2011 Design for Conversations & Conversations for Design Sep 2011 All Oracle UX Blogs Aug 2011 Farewell Loriot Aug 2011 Oracle VDI 3.3 Overview Aug 2011 Sutherland's Closing Remarks at HyperKult Aug 2011 Surface and Subface Aug 2011 Back to Childhood in UI Design Jul 2011 The Art of Engineering and The Engineering of Art Jul 2011 Oracle VDI Seminar - June-30 Jun 2011 SGD White Paper May 2011 TEDxHamburg Live Feed May 2011 Oracle VDI in 3 Minutes May 2011 Space Ship Earth 2011 May 2011 blog moving times Apr 2011 Frozen tag cloud Apr 2011 Oracle: Hardware Software Complete in 1953 Apr 2011 Interaction Design with Wireframes Apr 2011 A guide to closing down a project Feb 2011 Oracle VDI 3.2.2 Jan 2011 free VDI charts Jan 2011 Sun Founders Panel 2006 Dec 2010 Sutherland on Leadership Dec 2010 SocialChat: Efficiency of E20 Dec 2010 ALWAYS ON Desktop Virtualization Nov 2010 12,000 Desktops at JavaOne Nov 2010 SocialChat on Sharing Best Practices Oct 2010 Globe of Visitors Oct 2010 SocialChat about the Next Big Thing Oct 2010 Oracle VDI UX Story - Wireframes Oct 2010 What's a PC anyway? Oct 2010 SocialChat on Getting Things Done Oct 2010 SocialChat on Infoglut Oct 2010 IT Twenty Twenty Oct 2010 Desktop Virtualization Webcasts from OOW Oct 2010 Oracle VDI 3.2 Overview Sep 2010 Blog Usability Top 7 Sep 2010 100 and counting Aug 2010 Oracle'izing the VDI Blogs Aug 2010 SocialChat on Apple Aug 2010 SocialChat on Video Conferencing Aug 2010 Oracle VDI 3.2 - Features and Screenshots Aug 2010 SocialChat: Don't stop making waves Aug 2010 SocialChat: Giving Back to the Community Aug 2010 SocialChat on Learning in Meetings Aug 2010 iPAD's Natural User Interface Jul 2010 Last day for Sun Microsystems GmbH Jun 2010 SirValUse Celebration Snippets Jun 2010 10 years SirValUse - Happy Birthday! Jun 2010 Wim on Virtualization May 2010 New Home for Oracle VDI Apr 2010 Renaissance Slide Sorter Comments Apr 2010 Unboxing Sun Ray 3 Plus Apr 2010 Desktop Virtualisierung mit Sun VDI 3.1 Apr 2010 Blog Relaunch Mar 2010 Social Messaging Slides from CeBIT Mar 2010 Social Messaging Talk at CeBIT Feb 2010 Welcome Oracle Jan 2010 My last presentation at Sun Jan 2010 Ivan Sutherland on Leadership Jan 2010 Learning French with Sun VDI Jan 2010 Learning Danish with Sun Ray Jan 2010 VDI workshop in Nieuwegein Jan 2010 Happy New Year 2010 Jan 2010 On Creating Slides Dec 2009 Best VDI Ever Nov 2009 How to store the Big Bang Nov 2009 Social Enterprise Tools. Beipiel Sun. Nov 2009 Nov-19 Nov 2009 PDF and ODF links on your blog Nov 2009 Q&A on VDI and MySQL Cluster Nov 2009 Zürich next week: Swiss Intranet Summit 09 Nov 2009 Designing for a Sustainable World - World Usabiltiy Day, Nov-12 Nov 2009 How to export a desktop from VDI 3 Nov 2009 Virtualisation Roadshow in the UK Nov 2009 Project Wonderland at EDUCAUSE 09 Nov 2009 VDI Roadshow in Dublin, Nov-26, 2009 Nov 2009 Sun VDI at EDUCAUSE 09 Nov 2009 Sun VDI 3.1 Architecture and New Features Oct 2009 VDI 3.1 is Early-Access Sep 2009 Virtualization for MySQL on VMware Sep 2009 Silpion & 13. Stock Sommerparty Sep 2009 Sun Ray and VMware View 3.1.1 2009-08-31 New Set of Sun Ray Status Icons 2009-08-25 Virtualizing the VDI Core? 2009-08-23 World Usability Day Hamburg 2009 - CfP 2009-07-16 Rising Sun 2009-07-15 featuring twittermeme 2009-06-19 ISC09 Student Party on June-20 /Hamburg 2009-06-18 Before and behind the curtain of JavaOne 2009-06-09 20k desktops at JavaOne 2009-06-01 sweet microblogging 2009-05-25 VDI 3 - Why you need 3 VDI hosts and what you can do about that? 2009-05-21 IA Konferenz 2009 2009-05-20 Sun VDI 3 UX Story - Power of the Web 2009-05-06 Planet of Sun and Oracle User Experience Design 2009-04-22 Sun VDI 3 UX Story - User Research 2009-04-08 Sun VDI 3 UX Story - Concept Workshops 2009-04-06 Localized documentation for Sun Ray Connector for VMware View Manager 1.1 2009-04-03 Sun VDI 3 Press Release 2009-03-25 Sun VDI 3 launches today! 2009-03-25 Sun Ray Connector for VMware View Manager 1.1 Update 2009-03-11 desktop virtualization wiki relaunch 2009-03-06 VDI 3 at CeBIT hall 6, booth E36 2009-03-02 Keyboard layout problems with Sun Ray Connector for VMware VDM 2009-02-23 wikis.sun.com tips & tricks 2009-02-23 Sun VDI 3 is in Early Access 2009-02-09 VirtualCenter unable to decrypt passwords 2009-02-02 Sun & VMware Desktop Training 2009-01-30 VDI at next09? 2009-01-16 Sun VDI: How to use virtual machines with multiple network adapters 2009-01-07 Sun Ray and VMware View 2009-01-07 Hamburg World Usability Day 2008 - Webcasts 2009-01-06 Sun Ray Connector for VMware VDM slides 2008-12-15 mother of all demos 2008-12-08 Build your own Thumper 2008-12-03 Troubleshooting Sun Ray Connector for VMware VDM 2008-12-02 My Roller Tag Cloud 2008-11-28 Sun Ray Connector: SSL connection to VDM 2008-11-25 Setting up SSL and Sun Ray Connector for VMware VDM 2008-11-13 Inspiration for Today and Tomorrow 2008-10-23 Sun Ray Connector for VMware VDM released 2008-10-14 From Sketchpad to ILoveSketch 2008-10-09 Desktop Virtualization on Xing 2008-10-06 User Experience Forum on Xing 2008-10-06 Sun Ray Connector for VMware VDM certified 2008-09-17 Virtual Clouds over Las Vegas 2008-09-14 Bill Verplank sketches metaphors 2008-09-04 End of Early Access - Sun Ray Connector for VMware 2008-08-27 Early Access: Sun Ray Connector for VMware Virtual Desktop Manager 2008-08-12 Sun Virtual Desktop Connector - Insides on Recycling Part 2 2008-07-20 Sun Virtual Desktop Connector - Insides on Recycling Part 3 2008-07-20 Sun Virtual Desktop Connector - Insides on Recycling 2008-07-20 lost in wiki space 2008-07-07 Evolution of the Desktop 2008-06-17 Virtual Desktop Webcast 2008-06-16 Woodstock 2008-06-16 What's a Desktop PC anyway? 2008-06-09 Virtual-T-Box 2008-06-05 Virtualization Glossary 2008-05-06 Five User Experience Principles 2008-04-25 Virtualization News Feed 2008-04-21 Acetylcholinesterase - Second Season 2008-04-18 Acetylcholinesterase - End of Signal 2007-12-31 Produkt-Management ist... 2007-10-22 Usability Verbände, Verteiler und Netzwerke. 2007-10-02 The Meaning is the Message 2007-09-28 Visualization Methods 2007-09-10 Inhouse und Open Source Projekte – Usability verankern und Synergien nutzen 2007-09-03 Der Schwabe Darth Vader entdeckt das Virale Marketing 2007-08-29 Dick Hardt 3.0 on Identity 2.0 2007-08-27 quality of written text depends on the tool 2007-07-27 podcasts for reboot9 2007-06-04 It is the user's itch that need to be scratched 2007-05-25 A duel at reboot9 2007-05-14 Taxonomien und Folksonomien - Tagging als neues HCI-Element 2007-05-10 Dueling Interaction Models of Personal-Computing and Web-Computing 2007-03-01 22.März: Weizenbaum. Rebel at Work. /Filmpremiere Hamburg 2007-02-25 Bruce Sterling at UbiComp 2006 /webcast 2006-11-12 FSOSS 2006 /webcasts 2006-11-10 Highway 101 2006-11-09 User Experience Roundtable Hamburg: EuroGEL 2006 2006-11-08 Douglas Adams' Hyperland (BBC 1990) 2006-10-08 Taxonomien und Folksonomien – Tagging als neues HCI-Element 2006-09-13 Usability im Unternehmen 2006-09-13 Doug does HyperScope 2006-08-26 TED Talks and TechTalks 2006-08-21 Kai Krause über seine Freundschaft zu Douglas Adams 2006-07-20 Rebel At Work: Film Portrait on Weizenbaum 2006-07-04 Gabriele Fischer, mp3 2006-06-07 Dick Hardt at ETech 06 2006-06-05 Weinberger: From Control to Conversation 2006-04-16 Eye Tracking at User Experience Roundtable Hamburg 2006-04-14 dropping knowledge 2006-04-09 GEL 2005 2006-03-13 slide photos of reboot7 2006-03-04 Dick Hardt on Identity 2.0 2006-02-28 User Experience Newsletter #13: Versioning 2006-02-03 Ester Dyson on Choice and Happyness 2006-02-02 Requirements-Engineering im Spannungsfeld von Individual- und Produktsoftware 2006-01-15 User Experience Newsletter #12: Intuition Quiz 2005-11-30 User Experience und Requirements-Engineering für Software-Projekte 2005-10-31 Ivan Sutherland on "Research and Fun" 2005-10-18 Ars Electronica / Mensch und Computer 2005 2005-09-14 60 Jahre nach Memex: Über die Unvereinbarkeit von Desktop- und Web-Paradigma 2005-08-31 reboot 7 2005-06-30

    Read the article

  • Vagrant up doesn't load chef configs and doesn't keep an error log

    - by la_f0ka
    I'm trying to set up a vagrant box and I'm running with all sort of troubles. Right now I'm getting a strange error message where it states there's a stack trace file with more info, but that file is no where to be found. This is the error: stdin: is not a tty [Sun, 16 Sep 2012 18:31:47 +0000] INFO: *** Chef 0.10.0 *** [Sun, 16 Sep 2012 18:31:48 +0000] INFO: Setting the run_list to ["recipe[apt]", "recipe[openssl]", "recipe[apache2]", "recipe[mysql]", "recipe[mysql::server]", "recipe[php]", "recipe[php::module_apc]", "recipe[php::module_curl]", "recipe[php::module_mysql]", "recipe[apache2::mod_php5]", "recipe[apache2::mod_rewrite]"] from JSON [Sun, 16 Sep 2012 18:31:48 +0000] INFO: Run List is [recipe[apt], recipe[openssl], recipe[apache2], recipe[mysql], recipe[mysql::server], recipe[php], recipe[php::module_apc], recipe[php::module_curl], recipe[php::module_mysql], recipe[apache2::mod_php5], recipe[apache2::mod_rewrite]] [Sun, 16 Sep 2012 18:31:48 +0000] INFO: Run List expands to [apt, openssl, apache2, mysql, mysql::server, php, php::module_apc, php::module_curl, php::module_mysql, apache2::mod_php5, apache2::mod_rewrite] [Sun, 16 Sep 2012 18:31:48 +0000] INFO: Starting Chef Run for natty.talifun.com [Sun, 16 Sep 2012 18:31:48 +0000] ERROR: Running exception handlers [Sun, 16 Sep 2012 18:31:48 +0000] ERROR: Exception handlers complete [Sun, 16 Sep 2012 18:31:48 +0000] FATAL: Stacktrace dumped to /tmp/vagrant-chef-1/chef-stacktrace.out [Sun, 16 Sep 2012 18:31:48 +0000] FATAL: NameError: wrong constant name Chef-symfony2Console Chef never successfully completed! Any errors should be visible in the output above. Please fix your recipes so that they properly complete. And this is what my vagrantfile looks like: Vagrant::Config.run do |config| config.vm.box = "ubuntu-1104-server-i386" config.vm.network :hostonly, "33.33.33.33" config.vm.forward_port 80, 8000 config.vm.share_folder "symfony.tests", "/var/www/symfony.tests", "data", :nfs => true config.vm.provision :chef_solo do |chef| chef.cookbooks_path = ["../my-recipes/cookbooks", "site-cookbooks"] chef.add_recipe "apt" chef.add_recipe "openssl" chef.add_recipe "apache2" chef.add_recipe "mysql" chef.add_recipe "mysql::server" chef.add_recipe "php" chef.add_recipe "php::module_apc" chef.add_recipe "php::module_curl" chef.add_recipe "php::module_mysql" chef.add_recipe "apache2::mod_php5" chef.add_recipe "apache2::mod_rewrite" chef.add_recipe "Symfony" chef.json = { :mysql => { :server_root_password => 'root', :bind_address => '127.0.0.1' } } end end

    Read the article

  • JVM system time runs faster than HP UNIX OS system time

    - by winston
    Hello I have the following output from a simple debug jsp: Weblogic Startup Since: Friday, October 19, 2012, 08:36:12 AM Database Current Time: Wednesday, December 12, 2012, 11:43:44 AM Weblogic JVM Current Time: Wednesday, December 12, 2012, 11:45:38 AM Line 1 was a recorded variable during WebLogic webapp startup. Line 2 was output from database query select sysdate from dual; Line 3 was output from java code new Date() I have checked from shell date command that line 2 output conforms with OS time. The output of line 3 was mysterious. I don't know how it comes from Java VM. On another machine with same setting, the same jsp output like this: Weblogic Startup Since: Tuesday, December 11, 2012, 02:29:06 PM Database Current Time: Wednesday, December 12, 2012, 11:51:48 AM Weblogic JVM Current Time: Wednesday, December 12, 2012, 11:51:50 AM Another machine: Weblogic Startup Since: Monday, December 10, 2012, 05:00:34 PM Database Current Time: Wednesday, December 12, 2012, 11:52:03 AM Weblogic JVM Current Time: Wednesday, December 12, 2012, 11:52:07 AM Findings: the pattern shows that the longer Weblogic startup, the larger the discrepancy of OS time with JVM time. Anybody could help on HP JVM? On HP UNIX, NTP was done daily. Anyway here comes the server versions: HP-UX machinex B.11.31 U ia64 2426956366 unlimited-user license java version "1.6.0.04" Java(TM) SE Runtime Environment (build 1.6.0.04-jinteg_28_apr_2009_04_46-b00) Java HotSpot(TM) Server VM (build 11.3-b02-jre1.6.0.04-rc2, mixed mode) WebLogic Server Version: 10.3.2.0 Java properties java.runtime.name=Java(TM) SE Runtime Environment java.runtime.version=1.6.0.04-jinteg_28_apr_2009_04_46-b00 java.vendor=Hewlett-Packard Co. java.vendor.url=http\://www.hp.com/go/Java java.version=1.6.0.04 java.vm.name=Java HotSpot(TM) 64-Bit Server VM java.vm.info=mixed mode java.vm.specification.vendor=Sun Microsystems Inc. java.vm.vendor="Hewlett-Packard Company" sun.arch.data.model=64 sun.cpu.endian=big sun.cpu.isalist=ia64r0 sun.io.unicode.encoding=UnicodeBig sun.java.launcher=SUN_STANDARD sun.jnu.encoding=8859_1 sun.management.compiler=HotSpot 64-Bit Server Compiler sun.os.patch.level=unknown os.name=HP-UX os.version=B.11.31

    Read the article

  • Apache2 Segmentation fault with wsgi_module

    - by a coder
    Apache 2.2.3 is running as an existing web server under RHEL 5. Attempting to set up Trac using wsgi_module. RHEL 5 ships with python 2.4, so in order to use the current version of Trac (1.0) I needed to install it with easy_install-2.6. Trac works with the default mod_python, however users strongly encourage not using this module as it is officially dead. Using RHEL's package manager, I downloaded/installed python26-mod_wsgi.so. I backed up the httpd.conf, then made the following additions: LoadModule wsgi_module modules/python26-mod_wsgi.so #...# WSGIScriptAlias /trac /www/virtualhosts/trac/deploy/cgi-bin/trac.wsgi <Directory /www/virtualhosts/trac/deploy/cgi-bin> WSGIApplicationGroup %{GLOBAL} Order deny,allow Allow from all </Directory> Next I moved trac.conf to trac.conf.bak (contains mod_python calls). I tested the configuration using: apachectl configtest Syntax is OK. So I reloaded the server config using: service httpd reload At this time, all virtualhosted sites stopped responding. I restored my backup copy of httpd.conf, reloaded the server config, and the virtualhosted sites are being served again. A quick look at the httpd error_log shows: [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28282): Initializing Python. [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28280): Attach interpreter ''. [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1817): proxy: grabbed scoreboard slot 0 in child 28283 for worker proxy:reverse [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1836): proxy: worker proxy:reverse already initialized [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1930): proxy: initialized single connection worker 0 in child 28283 for (*) [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28283): Initializing Python. [Mon Oct 08 10:20:04 2012] [notice] child pid 28249 exit signal Segmentation fault (11) [Mon Oct 08 10:20:04 2012] [notice] child pid 28250 exit signal Segmentation fault (11) [Mon Oct 08 10:20:04 2012] [notice] child pid 28251 exit signal Segmentation fault (11) There are many similar lines, this is just a snip of the log file. Suggestions on what could be going on to cause the Segmentation faults?

    Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >