Search Results

Search found 2475 results on 99 pages for 'vmware vsphere'.

Page 91/99 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• BSOD trying to migrate Windows XP from a physical to a virtual machine

  - by pauldoo

  I am attempting to migrate a Windows XP Home installation from a physical machine to a virtual machine. The physical machine has two hard disks; the first is 250GB containing the "C:", the second is 1TB containing "D:". I'd like to create a new virtual machine stored on the D:, which is a copy of the Windows XP Home installation that is currently on the C:. (This will leave the 250GB drive clear for me to install a fresh copy of Windows 7, and still be able to access the old XP installation if necessary.) The first method I tried was to follow the instructions here: http://www.virtualbox.org/wiki/Migrate_Windows I booted up from an Ubuntu Live CD in order to execute the Linux commands whilst the Windows system wasn't running. With this method the virtual machine would always blue screen on startup with a "STOP 0x0000007B" message. The instructions above say to try a "repair install" using the Windows XP disc. Unfortunately for me my XP disc is scratched and will not boot so I was unable to try a repair install. The second method I tried was to use "VMWare Converter Standalone Client". This tool executed without any errors, but again produced a virtual machine that blue screens on startup with the same "STOP" message. Are there any other methods to move the Windows XP installation into a virtual machine? I think next I will try some more manual process to create the cloned virtual machine. I think I will try installing a fresh copy of Windows XP to a virtual machine, then once that is booting OK I will ntfsclone the source C: partition over the top. Perhaps this will fix the booting problems if the issue is related to the MBR or partition table in some way.

  Read the article

• Issues with creating USB bootable Mountain Lion

  - by Sidd

  I am trying to set up a triple boot Windows 8, Mountain Lion, and Ubuntu. I am stuck though. I have got Windows 8 on a partition, and I am trying to get Mountain Lion on there at this point. I installed a VMware with a Snow Leopard 10.6.2 image on the Windows 8 platform. I used the disk utility in this program in order to get Mountain Lion on there. This is what i did specifically: I got the installesd.dmg. I 'mounted' that file or whatever you call it, and out came something along the lines of "Install Mountain Lion OS x" (something like that - it was like a submenu under the installesd.dmg in the disk utility). I got my PNY 8 gb Attache Flash Drive and went to the Erase tab of disk utility. I erased it using the Mac OS Extended (Journaled) setting and called it "Mac". I went to the Restore tab, dragged "Mac" into destination, and dragged "Install Mountain Lion OS x" to the source. Everything seemed to go well, but it didn't. When trying to boot from the flash drive (and yes, I set the BIOS correctly), it skipped it, and loaded Windows 8 normally as if nothing was plugged in. When I try looking at the flash drive in windows 8, it comes up as a 200 mb capacity drive labeled "EFI" with nothing in it (remember, it was 8gb in the beginning). I downloaded Plop Boot Manager, but it did not recognize a USB being plugged in. Does anyone know how I could fix this?

  Read the article

• Virtualbox Headless Server on Ubuntu missing VRDP Options

  - by The Daemons Advocate

  I'm running VirtualBox headless server on an Ubuntu 64 bit host, and I want to use it remotely. However, I'm having problems connecting via RDP. The DNS names in my network show the host to be 'server', and the guest to be 'ubuntu-vm'. From the official documentation, I gather that I am to connect to server on the default RDP port in order to see the guest machine. I start the virtual machine like so: vboxheadless -startvm My_VM Then I connect on my laptop, and I get... rdesktop -a 16 server ERROR: server: unable to connect So next I consult the documentation further, and I find there are RDP flags that can be turned on (but should be on implicitly for a headless server). So I pull up information using 'vboxmanage showvminfo My_VM', and I find the VRDP property is off. VRDP Connection: not active To make things even weirder, RDP flag seems to be missing from vboxmanage. I've installed straight from the ubuntu repo's using the virutalbox-ose package, not sure how that measures up against the official docs. For instance, this command doesn't exist: VBoxManage modifyvm My_VM --vrdp on From the UI, the VM's Settings regarding Display have greyed out the 'remote Display' option. What I'm looking for is advice :). I'm open to suggestions that don't involve starting again with something like VMWare. Thanks in advance!

  Read the article

• ZFS - destroying deduplicated zvol or data set stalls the server. How to recover?

  - by ewwhite

  I'm using Nexentastor on a secondary storage server running on an HP ProLiant DL180 G6 with 12 Midline (7200 RPM) SAS drives. The system has an E5620 CPU and 8GB RAM. There is no ZIL or L2ARC device. Last week, I created a 750GB sparse zvol with dedup and compression enabled to share via iSCSI to a VMWare ESX host. I then created a Windows 2008 file server image and copied ~300GB of user data to the VM. Once happy with the system, I moved the virtual machine to an NFS store on the same pool. Once up and running with my VMs on the NFS datastore, I decided to remove the original 750GB zvol. Doing so stalled the system. Access to the Nexenta web interface and NMC halted. I was eventually able to get to a raw shell. Most OS operations were fine, but the system was hanging on the zfs destroy -r vol1/filesystem command. Ugly. I found the following two OpenSolaris bugzilla entries and now understand that the machine will be bricked for an unknown period of time. It's been 14 hours, so I need a plan to be able to regain access to the server. http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6924390 and http://bugs.opensolaris.org/bugdatabase/view_bug.do;jsessionid=593704962bcbe0743d82aa339988?bug_id=6924824 In the future, I'll probably take the advice given in one of the buzilla workarounds: Workaround Do not use dedupe, and do not attempt to destroy zvols that had dedupe enabled. Update: I had to force the system to power off. Upon reboot, the system stalls at Importing zfs filesystems. It's been that way for 2 hours now.

  Read the article

• Cisco ASA and static IPv6 tunnel endpoint?

  - by Martijn Heemels

  I recently installed a Cisco ASA 5505 firewall on the edge of our LAN. The setup is simple: Internet <-- ASA <-- LAN I would like provide the hosts in the LAN with IPv6 connectivity by setting up a 6in4 tunnel to SixXS. It would be nice to have the ASA as tunnel endpoint so it can firewall both IPv4 and IPv6 traffic. Unfortunately the ASA apparently can't create a tunnel itself, and can't port-forward protocol 41 traffic, so I believe I would have to do one of the following instead: Set up a host with it's own IP outside the firewall, and have that function as tunnel-endpoint. The ASA can then firewall and route the v6 subnet to the LAN. Set up a host inside the firewall that functions as endpoint, separated via vlan or whatever, and loop the traffic back into the ASA where it can be firewalled and routed. This seems contrived, but would allow me to use a VM instead of a physical machine as endpoint. Any other way? What would you suggest is the optimal way to set this up? P.S. I do have a spare public IP address available if needed, and can spin up another VM in our VMware infrastructure.

  Read the article

• How to speed up a HP M9517C

  - by Jen

  I bought a system with 8GB RAM, 1TB HD, Quad-Core AMD Phenom 9550, Nvidia Geforce 9300GE, 64-bit Windows Vista Machine. Bought it primarily because it was cheap and came with 25.5 inch screen. Problem: It's slow - if you can believe it. My Dell laptop 1525 is faster and more stable! I tried installing and dual-booting Linux Mint and ran into video and audio troubles. I need fast and stable and I'm going for awesome. Anyone have some suggestions on making this thing smoking hot? Vista is fine, but slows over time - suspect virus/spyware/etc.. But I need to use Photoshop, Fireworks, Dreamweaver, Illustrator. I've tried the alternatives and I just don't like them. When you've got deadlines looming you want to work with what you know. Also use Skype (and I had audio problems with it in Linux), gotomeeting, gotowebinar. Don't need MS Office. Tried VMWare, Virtualbox and again - I keep getting audio/video problems. I'd love someone's input on THEIR setup and how they got there. I'm sure I need to upgrade my video card, but what should I go to?

  Read the article

• time sync with ntpd

  - by guthrie

  I run Debian on several systems, and their times do not seem to stay in sync. I can run ntpdate manually, but I thought that I should have an ntpd running that would automate that. I did check with apt and apt-cache but don't find any ntpd (or associated ntpq), not any such names in my system (locate...), but ntp-doc does still describe them. Looking around I see that there is an ntpdate-debian command, and it uses /etc/default/ntpdate for servers (instead of the standard /etc/ntp.conf), but even thought that file is there and has "yes" indicated to use ntp.conf, it fails with "no servers can be used", although ntpdate works fine. Is this just a layer over ntpdate, any reason to use it instead? So, why are they missing, do I need them, how do I automate time updates? Associated, two of my machines are virtualized on a MSoft VM, how is it that their clocks drift, and both to different values? (The underlying Windows machine clock seems stable). I see a few old notes about time & ntp problems on VMware, didn't find anything either current or relating to MSoft VMs. Anything I did see says just to use ntpd, but as above, ...?!

  Read the article

• Multiple VM environment for developing/testing

  - by Hippo

  I was asked to create a setup for automated deployment, configuration, installation/updates of websites. A bunch of small websites will be bundled on one server. If more website will come up a new server will be created... I decided to us chef for this task. All servers will be running Ubuntu at the same version and configuration. The actual question: Everything needs to be tested properly before starting live deployment, so my question is: What is the best virtualisation tool to run multiple (5 - 10) virtual machines on a Ubuntu Laptop? Requirements: easy setup, fast (clone/snapshot of VMs) All VMs should be easily connected to the internet and should be able to communicate to each other (Open-Source / free would be great) So far I looked into: Virtual box is more for Desktop virtualisation, Cloning not possible, every new machine needs to be installed VMware Player Any suggestions? If there are any question about what I am doing please comment on this question, I will answer as soon as possible. This question is not about the actual set up, it is about a nice working environment.

  Read the article

• Simple P2V help from Linux to Windows

  - by Ke

  Hi, I have two OS's installed on different drives in my PC. One linux (Centos 5.4) and one windows 7. Its getting tiresome to constantly have to stop and restart the PC when I want to use either OS. I would very much like to use Windows 7 as my host OS and access my linux OS from within Windows. However, im having trouble deciphering exactly how to do this (many of the articles seem confusing and a bit overkill) From what i have seen its possible to use VMWare converter to convert the physical linux image to a virtual image so that I can use it in windows. As im having problems understanding how this is done, I would really appreciate a step by step guide (for a newbie), or any simple tutorials that you can point me at. Some questions beforehand: 1) My linux image is around 80gb, do i need to take this into consideration? The linux drive is around 180gb in total. All my other drives are NTFS non writeable in linux (as I use them in windows and ntfs is dodgy in linux), so probably not possible to move the image over to my ntfs drives 2) Can I just zip the linux files up somehow and transfer it to windows to create the p2v? 3) Is it possible to do the P2V conversion while I am logged into windows. I can see the actual linux drive loaded in disk manager, but windows doesnt read linux file systems so im confused as to how to access the linux drive if this is possible. 4) Or will i need to do the whole p2v conversion inside linux? Cheers, any help is much appreciated Ke (a confused p2v newbie)

  Read the article

• Issues with duplicating TFS 2005 to a virtual server

  - by Hitchhiker

  We have a problem with our current TFS installation. For some reason, which I won't get into, the Sharepoint DBs (sts_content, sts_config) were upgraded to WSS 3 (MOSS). So now, none of our team-project sites work, we have no access to our documents and can't create new team projects. We can still work with the version control, though. We wanted to "play" with the server and try to fix it, without affecting the users. So we used p2v for VmWare, to duplicate the server to a virtual one. We now continued and changed all of the relevant configuration to point to the new server, as explained in the MSDN article. The step of rebuilding the warehouse (with setupwarehouse) failed. Also, we can't access the VersionControl web service (ourserver:8080/VersionControl/v1.0/repository.asmx). We are seeing errors in the EventLog: TF53002: Unable to obtain registration data for application Build. TF53005: Unable to retrieve the Team Foundation Server installed UI culture. TF53002: Unable to obtain registration data for application VersionControl. TF30040: The database is not correctly configured. Contact your Team Foundation Server administrator. The solutions suggested in this blog post did not assist. So now we're kind of stuck. Any assistance will be appreciated.

  Read the article

• Restoring snapshot for Microsoft Exchange server

  - by Mugen

  Hi, The background: I need to do some testing with Microsoft exchange server. Specifically, I'll be installing some software on the Microsoft exchange server machine and uninstalling that same software again. The problem I face: While I repeatedly do this with different versions of my software there is a chance that sometime later the Exchange server installation might get corrupted. When that happens I would need to reinstall Exchange server which I feel is somewhat of a chore. So what I am planning to do is to install the Ms Exchange server on a virtual machine in VMware ESX server and take a snapshot so that during my work whenever the installation is corrupted I can restore the snapshot. So here's my question: Would restoring the snapshot for the Microsoft Exchange server virtual machine work correctly? I'm not familiar with the intricacies of exchange server and any changes (if any) that happen with the Domain controller when we use or install an exchange server (Personally I don't think that should happen but just making sure). I have a shortage of time and hence decided to post this question here. Could someone please tell me whether restoring a snapshot for Exchange server would work fine? Thanks a load, Mugen

  Read the article

• Error 53 - The network path was not found.

  - by Jack

  I have a machine in my Active Directory Domain that I can no longer "net view" from other machines in the domain. This is a Windows XP Pro machine. It is hosting a VMWare virtual of my Domain Controller. If I attempt to net view [machine name] I get system error 53, The network path was not found. This is not a DNS issue, the same thing happens with the machine's IP. I don't think it's a firewall issue, I turned the firewall off on this machine. As I mentioned, it has worked in the past, and then stopped for no reason that I can see. I (intentionally) didn't change the software. I CAN get to the VMs hosted on this machine, can connect to their shares, net view them, etc. All other machines can see each other. In fact, the problem machine can see other machines and access their shares just fine. I tried removing the machine from the domain and re-adding it. I tried deleting the shares and recreating them. Not sure how to troubleshoot this any further. Any ideas?

  Read the article

• OS X can't copy files from Windows Home Server...over wifi.

  - by John Clayton

  I'm a brand spanking new user of OS X, coming from a lifetime of Windows use. I've been setting up my new Macbook Pro and have run into a very unusual problem. Over wifi, I am unable to copy files to or from my Windows Home Server. The problem seems to exist only over wifi, and only to WHS. Here are the details of my setup: 2010 Macbook Pro (Core i7), OS X 10.6.3 Windows Home Server PP3 (virtualized in XenServer 5.5) Windows 7 Ultimate x64 desktop Windows 7 Ultimate x64 in Boot Camp D-Link DIR-655 wireless N router Here is what I've done to narrow down the problem: Files copy fine from WHS to OS X when using gigabit ethernet Files copy fine from desktop to OS X when using gigabit ethernet Files fail to copy from WHS to OS X when using wifi (error -51) Files copy fine from desktop to OS X when using wifi Files copy fine from WHS to Boot Camp when using wifi Files copy fine from desktop to Boot Camp when using wifi From what I can tell, it seems to be some sort of issue between OS X and WHS, but I can't for the life of me see what would be different between shares on WHS and my desktop. They are both connected using smb://ADDRESS (I've tried both by IP and name). I can browse the shares on the WHS, but copying to OS X fails. I originally found the issue while installing VS2010 off an ISO from WHS, mounted to a Windows 7 VM using VMware Fusion. During the installation the VM was unusable - even the clock got behind the host be about 8 minutes. Once I plugged in the ethernet and disabled the wifi things picked up and finished quickly. The Fusion 3.1 RC is the only I think of that I installed that may have messed with the wifi driver. I've also tried resetting the wifi router, and have changed it from being G & N to N-only. Under Boot Camp I get similar speeds as my wife's N laptop. Any ideas? Thanks!

  Read the article

• Redundant Microsoft server solution for small company

  - by MadBoy

  I'm planning to change one server Microsoft SBS 2003 with SharePoint, Exchange and SQL database into something that will provide me with some redundancy and won't be single point of failure. I was thinking to buy 2x exactly the same physical servers and put 2 virtualized servers on HyperV or VMWare on each. Then i would put SharePoint, Exchange and SQL on that 1 physical server (shared onto 2x VM's). I would like 2nd physical server to be exact duplicate of the first one so that when 1st server goes down (for reboot or hw failure), 2nd takes care of everything so that users don't even see anything changed (in terms all their emails, sharepoint stuff is available). My questions are: Will I have to pay for licenses for both servers even thou only one instance of SharePoint, Exchange, SQL will be used at same time? What are proposed solutions to do that? Any additional hardware I would need, any complicated software configuration to be expected to configure such redundancy so that when one physical server goes down 2nd one is taking care of rest? What problems should I expect? This solution is for 60 people. Later on it may or may expand.

  Read the article

• Dual boot nt4 and windows 98

  - by ItFinallyWorks

  I am trying to dual boot nt4 and windows 98 se (don't laugh - old computer). I have seen Microsoft's instructions for doing this, but it limits windows 98 to have a Fat16 partition (NT4's NTLDR doesn't understand FAT32) and therefore only 2GB of disk space. I really need it to have more than that. I started with Win 98 (on the 1st partition), repartitioned the disk, then added NT4 on the 2nd partition. NT4 took over the bootloader (as expected), so NT4 boots, but Win 98 doesn't. Right now I am working in VMWare so I can use nonpersistent hard drives (IDE like the real computer) to recover from errors easily. I've tried using XPs NTLDR using the instructions here: http://www.nu2.nu/fixnt4/ , but I got weird errors from NT4 and it never really worked. If XP's NTLDR would work, that should be able to boot both OSes. I've also tried using GRUB. In theory that should work. In fact when booting from super grub disk, it does. But as soon as I install grub to disk, Win 98 boots, but NT 4 blue screens at boot with a 0x0000007b inaccessible_boot_device error (that can be alot of things see MS kb 822051). The incantation I'm using for GRUB 1 is rootnoverify (hd0,1) makeactive chainloader +1 boot So, anybody have some suggestions?

  Read the article

• How can i get more low memory with the following setup:

  - by user539484

  Modules using memory below 1 MB: Name Total = Conventional + Upper Memory -------- ---------------- ---------------- ---------------- MSDOS 14 317 (14K) 14 317 (14K) 0 (0K) HIMEM 1 120 (1K) 1 120 (1K) 0 (0K) EMM386 3 120 (3K) 3 120 (3K) 0 (0K) OAKCDROM 36 064 (35K) 36 064 (35K) 0 (0K) POWER 80 (0K) 80 (0K) 0 (0K) NLSFUNC 2 784 (3K) 2 784 (3K) 0 (0K) COMMAND 2 928 (3K) 2 928 (3K) 0 (0K) MSCDEX 15 712 (15K) 15 712 (15K) 0 (0K) SMARTDRV 30 384 (30K) 13 984 (14K) 16 400 (16K) KEYB 6 752 (7K) 6 752 (7K) 0 (0K) MOUSE 17 296 (17K) 17 296 (17K) 0 (0K) DISPLAY 8 336 (8K) 0 (0K) 8 336 (8K) SETVER 512 (1K) 0 (0K) 512 (1K) DOSKEY 4 144 (4K) 0 (0K) 4 144 (4K) POWER 4 672 (5K) 0 (0K) 4 672 (5K) Free 552 944 (540K) 539 088 (526K) 13 856 (14K) Memory Summary: Type of Memory Total = Used + Free ---------------- ---------- ---------- ---------- Conventional 653 312 114 224 539 088 Upper 47 920 34 064 13 856 Reserved 0 0 0 Extended (XMS)* 64 898 256 2 671 824 62 226 432 ---------------- ---------- ---------- ---------- Total memory 65 599 488 2 820 112 62 779 376 Total under 1 MB 701 232 148 288 552 944 Total Expanded (EMS) 33 947 648 (33 152K Free Expanded (EMS)* 33 538 048 (32 752K * EMM386 is using XMS memory to simulate EMS memory as needed. Free EMS memory may change as free XMS memory changes. Largest executable program size 538 976 (526K) Largest free upper memory block 7 488 (7K) MS-DOS is resident in the high memory area. I'm running MS-DOS 6.22 on VMWare virtual hardware. This is memory state after memmaker pass, so i'm looking for optimization beyond memmaker. Note: NLS drivers (DISPLAY, KEYB, NSLFUNC) are essential for me. Thanks to @mtone for valuable reminder about MSCDEX /E which gave me 16KiB of low memory (see the diff)!

  Read the article

• Installing OEM Windows Server 2008 under KVM

  - by rancidfishbreath

  Issue I have an HP server that came with an OEM copy of Windows Server 2008. I have installed CentOS 5.4 on the hardware and am trying to install Windows Server 2008 as a KVM guest. When I attempt to install Windows Server 2008 it complains that I am trying to install on unsupported hardware. This issue is caused because the hardware SMBIOS information is not being passed to the KVM guest. Background Before I go any further I want to state that what I am trying to do is within the license. HP offers a supported solution for VMWare but does not have an official solution for KVM. After much research the platform I am going to use is CentOS and KVM so please do not suggest other platforms. I emailed the KVM developers mailing list and was told that this is possible and was given the advice that: "You can dump SLIC table of your host bios and provide it to guest bios using -acpitable parameter." I used dmidecode and got the parameters that need to be passed, but I do not know where to pass the parameters into. Update Looks like CentOS 5.4 uses virt-install instead of qemu. Qemu is in the package manager and I was able to install it after uninstalling qemu-img (they conflict and qemu contains the packages in qemu-img). So now I know how to pass the acpitable parameters, but I am having trouble mapping what came out of dmidecode into -acpitable.

  Read the article

• Is it possible to use XP visual styles (*.msstyles) or Windows Blinds in a thinapp portable applicat

  - by Camilo Martin

  It's been a while since I made a portable (Office 2007) Thinapp application, and since then I've uninstalled VMWare from my machine to free up space, so I'd like to know if someone already knows the answer to this before I set up everything again to try it. I'm thinking of installing a visual style (*.msstyles, for XP) along with the application to thinapp before post-setup capture. Failing that, maybe I'll try with visual mods such as Windows Blinds. The purpose is to be able to run a portable application with a specific visual style. So my question is: Is it possible? (I believe it somehow is, since VirtualBox does something similar to XP Mode) If it is, will it work on a computer with the "classic" Windows style? If it's not, will it work with another virtualization software? (Xenocode?) If it's not possible with *.msstyles, will it work with visual mods such as Windows Blinds? Thanks for any input! (P.S.: Awfully tagged due to lack of relevant tags or 100+ rep to create a tag :P)

  Read the article

• Linux Mint reset display resolution from console

  - by wullxz

  I have a Linux Mint 13 Xfce in a VMware Workstation 8 VM and set the resolution from 800x600 to 1280x768 and now I get permanently logged out when I try to login. I knew how to get back to my old resolution back in the xorg.conf days but Linux Mint now uses xrandr which won't display any displays when running # xrandr because X is not running (of course not - I can't login over GUI). I know that there are configuration files in /etc/X11/Xsession.d/ because I configured a debian based thinclient's resolution in a file called /etc/X11/Xsession.d/91configure_display but that file doesn't exist in my Linux Mint VM. So, how do I reset my X screen resolution from console? Edit: I forgot to tell you that I can't change resolution in console: # xrandr -s 800x600 Can't open display This message appears every time I use xrandr or xrandr -s *resolution* Update: I tried what bWowk suggested: # export DISPLAY=:0.0 # xrandr -s 800x600 No protocol specified No protocol specified Can't open display :0.0 So, that doesn't work either. Isn't there a configuration file that is executed every time X starts? X is running btw - ps aux | grep X shows one process /usr/bin/X running.

  Read the article

• Security and data backup for Ubuntu usb installation

  - by AMS949

  Due to encryption on my corporate laptop I opted to install Ubuntu 9.10 on a flash drive and just use it as my hard drive. I tried the vmware but it crashed my xp a couple of times. Now I have a couple of concerns since I am totally new to Ubuntu and Linux. First, would it be possible for me to transfer my installation to a new usb drive? I now have a 4gb and it may get filled up soon, I don't seem to be able to see my actual files when I browse the usb drive. I also tried copying all files from this usb to another and boot from it but that failed. Second, whenever the system boots up I am never prompted for a password, it is always the username ubuntu. Which I guess means if I lose my usb drive my data is open wide. Is there a way to secure it or to use users and groups as on a regular hard drive installation? As a background, I created this by going into a working Ubuntu installation, System - Administration - USB Starter Disk Creator (was that the right way to start with?) Thanks!

  Read the article

• Huge or minimal performance hit running game servers on a Virtual Machine? [closed]

  - by Damainman

  I have a two dedicated servers to choose from depending on which one would do a better job. I plan on updating the Hard Drive space and RAM at a later date depending on how I move forward. Server 1: 500GB Hard Drive 8GB RAM 2x 64bit Intel Xeon L5420(Quad Core) @ 2.50Ghz Server2: 500GB Hard Drive 8GB RAM 2x 64bit Intel Xeon E5420(Quad Core) @ 2.50GHz I want to run a virtual machine that will host about 10 game servers, with about 16 active slots per server. It will be a mix and match from: Minecraft Counter Strike( 1.6, Source, Global Offensive) Battlefield Team Fortress I know the general consensus is virtualization is a horrible idea if you plan on running virtual servers on them. The issue is, the discussions I read do not really clearly state whether they are speaking about a virtual server running inside an OS(ie: VMware Player running on Windows with the game server in a VM) or a Hypervisor such as Xen Cloud Platform. I am trying to get a definite answer on how feasible the above would be and how much of a performance hit it might be if the VM running the game servers is on a hypervisor such as Xen Cloud Platform. My initial research lead me to believe that there wouldn't be a performance hit since the virtualization is different than running it via inside of a OS.

  Read the article

• Cisco Multi-DMZ firewall

  - by BParker

  I need to find a firewall that will give me 1 LAN port, and 5-7 DMZ ports. I have a requirement to replace some FreeBSD systems that are used to run some testing equipment. It is essential that the DMZ ports cannot communicate with each other, but the LAN port can communicate with everyone. That way a user on the LAN can connect to the test systems, but the test systems are isolated entirely and cannot interfere with each other. One of the DMZ's will be connected to a VMWare ESXi server, one to a standard server, and the rest to various types of equipment. The lan port will be connected to the corporate LAN switch. Sorry if i am a little vague, I am just trying to work all this out myself! Currently we have a FreeBSD configured, but the quad port NIC's are pretty expensive, and the PC itself is old, so i would prefer to replace it with a dedicate piece of kit which can do the same job, but more reliably! These test rigs are used all over the place, and get moved quite often, so i am aiming for Cisco kit for ease of configuration and reliability of the hardware itself. Thanks

  Read the article

• Networking lost after update from Debian Wheezy to Jessie

  - by Charaf

  I am currently setting a Virtual Machine for development purposes. I did a big part of this configuration under Wheezy, but I need some debs that were available only on Jessie. So, I've updated the sources.list and did a dist-upgrade. Everything went well, but after the reboot, I noticed that I lost all the networking. Repositories are unreachable, as well as a simple ping google.fr returns nothing. What can I do to quickly restore networking so that I can continue my working. I have a poor connexion and can not afford to download the whole install DVDs. root@vm~# ifconfig lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:65536 Metric 1 RX packets:452 errors:0 dropped:0 overruns:0 frame:0 TX packets:452 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:164238 (160.3 KiB) TX bytes:164238 (160.3 KiB) root@vm~# I am running VMware 1.0.1 build 1379776 and the last update of Jessie (debian 3.14.4-1) Please help. Thanks.

  Read the article

• OS X won't see Windows 7 in network (and vice versa)

  - by meds

  I've enabled SMB sharing in OS X Lion and have added folders to share, it says 'Windows Sharing: On' with a green circle next to it (from the sharing window) and that to access the volume I will need to to go to \\192.168.0.17. It also says that the OS X should be visible as 'macbook' in the network. Both my WIndows 7 and OS X are connected to the same network, yet when I try to go to \\192.168.0.17 or from the Mac try to go to my Windows system (smb://192.168.0.6) the two OSs don't see each other. Any ideas why? Attempting to ping the Mac from Windows results in this output in the command prompt: Pinging 192.168.0.17 with 32 bytes of data: Reply from 192.168.0.6: Destination host unreachable. Request timed out. Request timed out. Request timed out. Ping statistics for 192.168.0.17: Packets: Sent = 4, Received = 1, Lost = 3 (75% loss), ipconfig in Windows is: Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::8918:efd1:b05c:890f%21 IPv4 Address. . . . . . . . . . . : 192.168.0.6 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 Ethernet adapter Bluetooth Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::98ab:63fc:3c07:d837%13 IPv4 Address. . . . . . . . . . . : 192.168.74.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::80ff:c575:7b50:3a10%14 IPv4 Address. . . . . . . . . . . : 192.168.21.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Tunnel adapter isatap.{2E97D0AE-9E18-4072-AC23-1979BA0DCB79}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{E260CE43-E9A7-4DE0-A88E-4EAFF68ACDDB}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{A5130812-59CE-4DDF-9C35-9433BCED9831}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{134BCAE7-CFFF-4A98-8DA0-3708806AABEB}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{8D9E3B8F-161C-4ACE-B211-3EDD694416B2}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : in OS X: lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4> ether c8:2a:14:01:24:c1 media: autoselect (none) status: inactive en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether e0:f8:47:0c:fe:04 inet6 fe80::e2f8:47ff:fe0c:fe04%en1 prefixlen 64 scopeid 0x5 inet 192.168.0.17 netmask 0xffffff00 broadcast 192.168.0.255 media: autoselect status: active p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 ether 02:f8:47:0c:fe:04 media: autoselect status: inactive fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078 lladdr 70:cd:60:ff:fe:d8:f1:32 media: autoselect <full-duplex> status: inactive

  Read the article

• Setting up CIFS ISO Repository for Xen

  - by user85610

  I recently started working with Xen, to try to make better use of an extra desktop box for development testing. I'd like to be able to do OS installs on it without having to burn discs, but I'm having some trouble actually being able to get it to boot OS ISOs from a Windows share. My Windows box is running Win 7, and it's on a domain. I created a CIFS ISO SR in Xen, specifying the correct username and password to use. Xen is able to scan the share, and I see the ISOs that are in the folder, and can select them in the list in XenCenter. However, when I try to start the VM, I get "Error: Starting VM 'linxcentos' - INVALID_SOURCE - Unable to access a required file in the specified repository: file:///tmp/cdrom-repo-hIz-H7/isolinux/vmlinuz." I tried booting a different Linux ISO and got the same result. I know that the ISOs are valid because I was able to install them without issue when I tried VMWare ESXi earlier. What am I missing here? It's Xen/XenCenter 6 and I'm trying to install the newest version of Centos. I may end up burning it for now, but I'd like to get this to work, at least just for the principle of not letting mysterious behaviors go unsolved...

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >