Search Results

Search found 25196 results on 1008 pages for 'hard drive cache'.

Page 92/1008 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• How To Dual Boot Windows 7 and Ubuntu in 32GB SSD

  - by Hussain

  In my System I have a 32GB SSD and a 500GB HDD. I want to dual Boot My Windows OS and Ubuntu OS in the Same SSD HardDisk..but i am Unable to do that...afterwards i tried to install Both the OS in my 500 GB HDD, but it then also is Not Dual Booting.... Then i have Tried to Boot my Ubuntu in 32 SSD & Windows 7 in HDD, So While Booting it Starts with Windows 7... So My Question is First of all How To Dual Boot Windows 7 and Ubuntu in 32 GB SSD.. and if Not Possible then... Why is it Not Booting From 500GB HDD.. Please Help Me..... Thanxx in Advance..

  Read the article

• How can I hard reset a USB device?

  - by Cory

  I have a USB device (a modem) that is really finicky. Sometimes it works fine, but other times it refuses to connect. The only solution I have found to fix it once it gets into a bad state is to physically unplug the device and plug it back in. However, I don't always have physical access to the machine it is plugged in on, so I'm looking for a way to do this through the command line. This post suggests running: sudo modprobe -w -r usb_storage; sudo modprobe usb_storage However I get an "unknown option -w" output. This slightly modified command: sudo modprobe -r usb_storage Fails with the message FATAL: Module usb_storage is in use. If I try to kill -9 the processes marked [usb-storage] before running they refuse to die (I think because they are deeply tied to the kernel). Anyone know of a way to do this? NOTE: I cross-posted this on superuser.com as I didn't know which was more appropriate. I will delete and/or link whichever one is answered first.

  Read the article

• How to implement Cache in web apps?

  - by Jhonnytunes

  This is really two questions. Im doing a project for the university for storing baseball players statitics, but from baseball data I have to calculate the score by year for the player who is beign displayed. The background is, lets say 10, 000 users hit the player "Alex Rodriguez", the application have to calculate 10, 000 the A-Rod stats by years intead of just read it from some where is temporal saved. Here I go: What is the best method for caching this type of data? Do I have to used the same database, and some temporal values on the same database, or create a Web Service for that? What reading about web caching so you recommend?

  Read the article

• Very slow write access to SSD disks on some Asus P8Z77 motherboards

  - by lenik

  I have Asus P8Z77-V LK motherboard, that ran Mint 13 (based on Ubuntu 12.04) just perfectly, but recently I've tried to install Mint 17 and noticed abysmal write performance. Write speed on SSD disk was about 1.5MB/sec, when it's supposed to be in 150-250MB/sec range. For write testing I've used dd if=/dev/zero of=/dev/sda bs=10M count=10 while booted up from LiveCD. I have also tested the read speed with hdparm -tT /dev/sda and got about 440MB/sec -- that's normal. I can tell, the read performance has not degraded at all and is not an issue here. Since I had a few different SSD disks and few motherboards, I've tested and tested and here are results: Asus P8H77 works fine with Mint13, has very slow write speed starting from Mint14. Asus P8Z77-V LK works with Mint13, has very slow write speed starting from Mint14. Asus P8Z77-V PRO works with Mint13, and works just fine with Mint14, 15, 16 and 17. The only difference between "PRO" version and others is that it has extra SATA controller onboard (in addition to the Z77 chipset SATA controller) providing extra 2 SATA ports. SSD disks work fine with "PRO" version when connected to the native SATA ports as well as to the ports provided by extra SATA controller, so this does not look like a hardware issue. As far as I can tell, there's something changed in the kernel while going from 3.2 to 3.5, that affects the detection of onboard SATA controller for Asus P8*77 motherboards, that screws up the write speed for SSD drives. Could anyone shed some light on how to fix this issue or, possibly, give a pointer to a more suitable place to ask this question?

  Read the article

• Qt question: hard-coded shortcuts

  - by miLo

  I have asked this question on several places but I still can't figure it out. What I am trying to do is to have a QKeySequence(Qt::CTRL + Qt::Key_X, Qt::CTRL + Qt::Key_C) in a MainWindow with QTextEdit as a central widget. The problem is that I have a shorcut for Cut(Ctrl+X) and when I press Ctrl+X,Ctrl+C it doesn't work. When the focus is on diffrent widget the shorcut works perfectly. I tried with overriding the QWidget::keyPressEvent and QWidget::event but it is the same. I have one more question: if I have these two shorcuts Ctrl+X and Ctrl+XCtrl+C why I don't receive the signal activatedAmbigiously() when I press Ctrl+X? According to the Qt documentation When a key sequence is being typed at the keyboard, it is said to be ambiguous as long as it matches the start of more than one shortcut.

  Read the article

• Podcast Show Notes: Old Habits Die Hard in the New SOA World

  - by OTN ArchBeat

  Like the previous series, the latest OTN ArchBeat Podcast program was also recorded in a hotel room just around the corner from Oracle OpenWorld in San Francisco just a few weeks ago. The gathered experts, all members of the OTN architect community, agreed to participate in an informal roundtable discussion of what's happening in Service Oriented Architecture. As you'll hear, the conversation ranged from the maturity of Service Oriented Architecture technology and tools, to the the lingering and typically self-imposed problems that can prevent organizations from realizing the full potential of SOA, to what SOA means in the era of *aaS, mobile computing, and big data. Hajo Normann, Torsten Winterberg, Ronald van Luttikhuizen, and Guido Schmutz (L-R) Hajo Normann, Torsten Winterberg, Danilo Schmeidel, and Lonneke Dikmans (L-R) The Panelists (Listed alphabetically) Lonneke Dikmans, Managing Partner at Vennster, Oracle ACE Director Ronald van Luttikuhuizen, Managing Partner at Vennster, Oracle ACE Director Hajo Normann, SOA & BPM Lead for ASG at Accenture, Oracle ACE Director Danilo Schmiedel, Solution Architect at Opitz Consulting Guido Schmutz, Technology Manager for SOA/BPM and Architecture Board at Trivadis, Oracle ACE Director Torsten Winterberg, Director of Strategy and Innnovation and head of SOA Competence Center at Opitz Consulting, Oracle ACE Director The Conversation Listen to Part 1: SOA technology and tools are mature, says this panel of experts, but why do some organizations still struggle to take full advantage of industrialized SOA? Listen to Part 2 (Nov 6): Human nature and a lack of trust among stakeholders can thwart successful SOA. Can a marketplace approach and social tools improve the situation? Listen to Part 3 (Nov 13): Do SOA stakeholders recognize the problems caused by poor communication among siloed service development teams? Coming Soon SOA and B2B: The authors of Getting Started with Oracle SOA B2B Integration: A Hands-On Tutorial discuss Business to Business capabilities in Oracle SOA Suite 11g. Be a Guest Producer for an ArchBeat Podcast Want to be a guest producer for an OTN ArchBeat podcast, put your topic and panelist suggestions in a comment on this post, or contact me at @OTNArchBeat.

  Read the article

• Live boot from hard disk problem

  - by user172277

  I've installed Ubuntu Desktop 13.04 32bit. Next I configured /etc/grub.d/40_custom to boot live system from ubuntu.iso (also Desktop 13.04 32 bit) I used configuration: menuentry "Ubuntu 13.04 Desktop" { loopback loop /boot/ubuntu.iso linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=/boot/ubuntu.iso noeject noprompt splash -- initrd (loop)/casper/initrd.lz } and it works OK. Later I made some changes on my installed ubuntu. I made some configuration, installed additional packages and so on. After that I made backup using remastersys tool. Remastersys gave me new ISO file. So I wanted to use it. And here was first problem. Remastersys creates only initrd.gz file. So I changed the grub configuration form: initrd (loop)/casper/initrd.lz to: initrd (loop)/casper/initrd.gz But after that, when I reboot my system I get error: /init: line 3: can't open /dev/sr0: No medium found Any ideas how to fix it? Best Regards, Bartosz

  Read the article

• md5sum repeatedly gives different checksum for same file on same machine

  - by Joel

  I have a very small and quite old hard drive disk, about 32G. On to this disk I have copied a largish tar file, about 5G. When I run md5sum to generate a checksum on this file I repeatedly get different results (on the same machine and the same file). This obviously should not happen. If I repeat the experiment with a much smaller file, as expected the checksum is the same each time. I can only assume that because the large file is spanning most of the disk, and it is an old drive, I am experiencing a lot of read errors on the hard drive - and it needs replacing? Could there be any other good reason for this? Something I can do to fix the problem other than buying a new disk? Update: sha1sum also produces inconsistent results.

  Read the article

• MacBook Pro - 72k vs 54k rpm drives - Heat and Noise

  - by webworm

  I am looking at a new 15" MacBook Pro for development purposes. I am planning to run a Virtual Machine for about 50% of my work (Windows 7 x64, IIS, SQL Server, and VS 2010). The upgrade from a 54000 rpm drive to a 72000 rpm is only $45. From what I understand the faster rotational speed of the 72000 rpm drive will help virtual machine performance. However, I am concerned that additional heat and fan noise might be an issue. I will be running mostly on A/C power so decreased battery life is not a major concern for me. Since I would be running with a Core i7 processor which gives off a fair amount of heat already I was wondering if it might be best to stay at 54000 rpm for the hard drive. What do you all think? Thanks!

  Read the article

• How to mount an external HDD?

  - by Slash

  I have Ubuntu Linux 12.04 version the latest right now.I want to mount an external HDD NTFS 1TB.I have followed many guides but still no success.The error I'm getting is this: Failed to read last sector (1953523119): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? Using Storage Device MAnager i get this error:Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/Skliros_Diskos {external disk name} When I use sudo fdisk -l, this is the output: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e0bc6 Device Boot Start End Blocks Id System /dev/sda1 * 2048 618854399 309426176 83 Linux /dev/sda2 618856446 625141759 3142657 5 Extended /dev/sda5 618856448 625141759 3142656 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000202043392 bytes 255 heads, 63 sectors/track, 121600 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002093a Device Boot Start End Blocks Id System /dev/sdb1 2048 1953525167 976761560 7 HPFS/NTFS/exFAT

  Read the article

• `power/persist` file not found in USB device sysfs directory

  - by intuited

  The file /usr/share/doc/linux-doc/usb/persist.txt.gz mentions that the USB-persist capability can be enabled for a given USB device by writing 1 to the file persist in that device's directory in /sys/bus/usb/devices/$device/power. This is said — if I understood correctly — to allow mountings of volumes on the drive to persist across power loss during suspend. However, I've discovered that the device I'd like to enable this facility for — a USB hard drive — does not have such a file in its corresponding directory, and that attempts to create it are rebuffed. Is there perhaps a kernel module that needs to be loaded for this to work? Do I need to build a custom kernel? I'm running ubuntu 10.10.

  Read the article

• continuous hard disk access - slowing down my machine

  - by suresh

  I find from the hard disk access LED on the front of my machine that the hard disk is being accessed more often and probably because of that, my machine is quite slow. The machine becomes unresponsive even when the load as seen from w command is around 1 or so. My desktop is optiplex 360 dell machine running Ubuntu 10.04. My questions are: How to quantify hard disk access and how to see if it is more than "normal" ? If it is more than normal, what are my solutions ? thanks suresh

  Read the article

• How to reload UBUNTU11.04 again which is hidden in the hard disk

  - by Yaskadeva

  I had installed Ubuntu 11.04 as another OS ( not inside Windows). means every time i used to get a Ubuntu screen and i can select Ubuntu or windows. but once i formatted my windows. after that the 38 gb memory which was used under Ubuntu is missing means the ubuntu is there and as it is EXT type windows is not able to access that. and i am not able to boot into it.I need ubuntu i can install new version but my memory is being wasted i do not kno what to do. pl reply me asap.

  Read the article

• How to automaticaly mount luks-partition only when disk is plugged in

  - by Frederick Roth

  I have the following scenario: I want to automatically backup some data from my Laptop(Fedora Core 17) to a external encrypted(luks) hard disk. The disk can be opened by a key file, which lies on the also encrypted root partition of my laptop. The hard disk is attached to my docking station and therefore only "present" when I am at home (which is approximately 1/2 of the time the Laptop runs) I have everything set up the way I want it with one exception. I don't get a decent way to mount the hard disk automatically at boot if and only if it is present. If I add it to crypttab and fstab without noauto it tries to mount it at boot and takes a lot(!) of time and error messages when it is not present. If I add noauto, well it does not mount automatically ;) Is there a way to configure luks/crypttab to do the following: check whether the disk is present if yes: decrypt/mount if no: just don't

  Read the article

• Do SSD hybrid drives perform better than HDD + ReadyBoost flash?

  - by Chris W. Rea

  Seagate has released a product called the Momentus XT Solid State Hybrid Drive. This looks exactly like what Windows ReadyBoost attempts to do with software at the OS level: Pairing the benefits of a large hard drive together with the performance of solid-state flash memory. Does the Momentus XT out-perform a similar ad-hoc pairing of a decent hard drive with similar flash memory storage under Windows ReadyBoost? Other than the obvious "a hardware implementation ought to be faster than a software implementation", why would ReadyBoost not be able to perform as well as such a hybrid device?

  Read the article

• Week in Geek: Google Drive Desktop Client Allows Backdoor Access to Google Accounts

  - by Asian Angel

  Our last edition of WIG for October is filled with news link coverage on topics such as Microsoft may not issue a second Windows 7 service pack, Windows Media Center is free for Windows 8 Pro users for limited time, CyanogenMod logged swipe gestures used to unlock Android devices, and more. What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8 HTG Explains: Why You Shouldn’t Use a Task Killer On Android

  Read the article

• Deleted Partition Recovery

  - by ankur.trapasiya

  Recently i was installing ubuntu 12.04 on my system. There were 4 partitions on my system and i selected one of the four partition for the installation and chose the option of re sizing the partition. Initially my partition was of size 100+GB and i created another partition out of it of size 15GB (EXT4). Now the moment i changed this partition structure my original partition got lost along with its data and i am left with 50GB partition and 50GB unallocated free space. Now the data that i have lost is meant a lot to me and i want to recover that data. So is there any way i can recover it ? And i haven't checked "format" option while resizing the partition. Thanks in advance.

  Read the article

• Using a non-validated SED on a Dell R720

  - by a coder

  We were given a Dell R720 a couple years ago, and the machine currently has standard 300GB 3.5" SAS 15k drives. Our RAID controller is a Perc H710. We need to update our disks to FIPS 140-2 certified SED. According to Dell, they have only one tested/validated FIPS SED for this machine/controller, but it is a 7200rpm 3.5" unit. I'm showing that Dell offers a 600GB 15k FIPS SED in 3.5" configuration (Dell part number 342-0605), but they say they haven't validated or tested to know if it works. They informed us that we would not void our warranty in using this non-validated drive. How likely is it that our R720 with H710 controller will work with the non-validated drive? Are there significant differences in how drive manufacturers build SED that would prevent them from working consistently across different controllers?

  Read the article

• 12.10 does not boot sometimes from the hard drive, but it does consistently from the CD

  - by Robert

  I have recently switched from Windows 7 to Ubuntu 12.10. I have installed Ubuntu 12.10 and I cleared everything from my computer, but it randomly stops at different screens. Only a purple screen comes up. I can choose Ubuntu from a list and a blinking white dot appears in the top left corner. The previous things happen and the Ubuntu login screen appears an I can log in. It is random. and I have not changed anything. I can always insert the bootable CD and it will work every time.

  Read the article

• Why is NDA so hard to understand?

  - by Dave Campbell

  Maybe this concept is simpler for me because of all the jobs I've been on over the years requiring security clearances. I've signed quite a few NDA forms. Some for big companies, some for small, but the meaning of "NDA" remains constant: Non-Disclosure Agreement. To me, that takes no further explanation, but apparently it's confusing to some people, and I don't understand how you can be confused. The papers I signed with the U.S. Army in 1970 read "10 years and $10,000" for a violation... can't imagine what it's up to now, but THAT is a strict NDA :) So those things I've been told, I cannot talk about, period. Even if the entire world knows about them, I cannot speak about them until the information goes off NDA. An example was a Silverlight release a while back. It might have been Silverlight 3, I don't remember. Everyone was anxiously awaiting the release so they could post their material. Of course the entire world knew it was coming out and imminently so. Some enterprising folks had even found the bits on a server before the official announcement. So then the situation became: everyone knew about it, some were even coding with it and blogging about it and yet we couldn't talk about it. Scott Guthrie's posting about it opened the flood gates and then it went off NDA, but up until that moment, we were locked. Sitting out on the edge you're uninstalling and re-installing all the time and you get frustrated when things that used to work don't, but hey... those bits were still warm when you got 'em, and that's the fun. But that fun comes at a price, and the price is the NDA. Awkward yes, confusing no... See you at MIX10, and Stay in the 'Light! MIX10

  Read the article

• Does the advanced format tool bundled by manufacturers actually do anything which mkntfs doesn't?

  - by neurolysis

  I recently bought a new drive (specifically, a 2TB Samsung Spinpoint) that says on the label that it supports advanced format, and that I should download the tool from their site. Unless I'm missing something, mkntfs has always had its maximum sector size at 4096b: -s, --sector-size BYTES Specify the size of sectors in bytes. Valid sector size values are 256, 512, 1024, 2048 and 4096 bytes per sector. If omitted, mkntfs attempts to determine the sector-size automatically and if that fails a default of 512 bytes per sector is used. Will this tool on Samsung's site do anything other than format the drive in the same way doing mkntfs -s 4K /dev/sdb1 would do? To be specific, I'm intending to use this drive on a machine that will primarily run Windows XP, but I'd rather boot into Linux/BSD and format the disk manually than have bloated software. I do want to have the new AF style sectors though -- that's essential. So if I did the command above, would it have exactly the same effect as using the advanced format tool?

  Read the article

• How to change harddrive spindown time?

  - by norpol

  if I run my notebook on battery mode, ubuntu spindown my hardrive every few seconds. How can I fix that? I have tried it with sudo hdparm -S 127 /dev/sda* but I am not able to disable the spindown and can´t find the reason for this "bug". Running Ubuntu 12.04 - Bug is since 12.04 Recent updates are installed, the problem is still recent. I can change the settings via. sudo hdparm -B 127 but if I change hdparm.conf, Ubuntu does not recognize it. /dev/sda { apm_battery=127 }

  Read the article

• changing drive nodes & hdparm

  - by Kalamalka Kid

  I am currently attempting to create a command that works at startup to kill the power on two of my very noisy hard drives. I have edited the etc/rc.local file to include this command: sudo hdparm -y /dev/sdc sudo hdparm -y /dev/sdd exit 0 While I think this should work, it seems the allocated drives keep switching around every time I reboot. I have sda, sdb, sdc, sdd, and sde but they keep getting jumbled around (making the drive I wish to shut different than sdd which is making the task of shutting down the right drive on start-up quite cumbersome. I had a perfectly functioning ftstab file working which disappeard, but I restored it from the back up into the etc/ dir: # <file system> <mount point> <type> <options> <dump> <pass> #Entry for /dev/sda1 : UUID=43c09daf-08a5-44f2-89b0-fc7c6f0d1e67 / ext4 errors=remount-ro 0 1 #Entry for /dev/sdd1 : UUID=443AFBAD7FE50945 /media/DX100 ntfs-3g defaults,nosuid,nodev,locale=en_CA.UTF-8 0 0 #Entry for /dev/sdb1 : UUID=FCE456F5E456B21E /media/GalaxyM83 ntfs-3g defaults,nosuid,nodev,locale=en_CA.UTF-8 0 0 #Entry for /dev/sdf1 : UUID=1CA057FDA057DBB8 /media/Holideck ntfs-3g defaults,nosuid,nodev,locale=en_CA.UTF-8 0 0 #Entry for /dev/sdc1 : UUID=7ABB49654B799D40 /media/JX3P ntfs defaults,nosuid,nodev,locale=en_CA.UTF-8 0 0 it seems every time I boot the order of the drives changes. I do not know how to resolve this. A quick workaround the problem was to go with UUID instead of the DEV letter by editing the etc/rc.local file to include: hdparm -y /dev/disk/by-uuid/443AFBAD7FE50945 hdparm -y /dev/disk/by-uuid/7ABB49654B799D40 So I thought I was in the clear, as I heard both hard drives die down during the boot sequence, BUT, as soon as I log in both drives start up again! so now I have to figure out what is making them start up again after log in, or perhaps another way to get them to turn off. Is there some kind of command i can get to execute after log in? I tried editing the startup applications to include an autossh with: autoshh - sudo hdparm -y /dev/disk/by-uuid/7ABB49654B799D40 autoshh - sudo hdparm -y /dev/disk/by-uuid/443AFBAD7FE50945 but this did not seem to work to turn off the disks after log in.

  Read the article

• Programming is easy, Designing is hard

  - by Rachel

  I work as Programmer and I feel if design documents are properly in place and requirements are clearly specified than programming is not that difficult but when I think in terms of Designing a Software than it gives chills to me and I think its a very difficult part. I want to develop my Design Skills so, How should I go about it ? Are there any books, blogs, websites or other approaches that SO community can suggest ? Update: By Design I meant Design of overall Application or particular problem at hand and not UI Design.

  Read the article

• Harddrive in the freezer ever work for you?

  - by Stefan Thyberg

  Once upon a time, my little 10 GB drive in my webserver failed and of course I had no backup, teaching me to immediately set up an automatic backup job afterwards. Anyhow, this drive refused to start and as a last-ditch effort I put it in a plastic bag and put it in the freezer overnight, since I had heard somewhere that it might work and I really didn't have any other options. The next day I take it out, immediately plug it in outside the case and lo and behold, the drive works long enough for me to copy my data off it. Have you ever had a similar experience with this method?

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >