Search Results

Search found 3022 results on 121 pages for 'loose typing'.

Page 92/121 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• External DNS and IIS Webserver requirement for Outlook Anywhere 2007 ?

  - by Albert Widjaja

  Hi, I just would like some clarification about which External hostname / DNS entries that I need to publish in my external facing DNS server to enable Outlook Anywhere on my Exchange Server 2007 for external user: ExCAS01.domain.com - Exchange CAS A Record Autodiscover.domain.com - Autodiscover CNAME to the CAS Server above _autodiscover._tcp.domain.com - SRV type record and do I have to expect anything by typing this address in bowser "https://autodiscover.domain.com/AutoDiscover/AutoDiscover.xml" ? because i get request time out at the moment. here are the error log from https://testexchangeconnectivity.com: Host Excas01.domain.com couldn't be resolved in DNS Exception details: Message: The requested name is valid, but no data of the requested type was found Type: System.Net.Sockets.SocketException Stack trace: at System.Net.Dns.GetAddrInfo(String name) at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6) at System.Net.Dns.GetHostAddresses(String hostNameOrAddress) at Microsoft.Exchange.Tools.ExRca.Tests.ResolveHostTest.PerformTestReally() Host autodiscover.domain.com couldn't be resolved in DNS Exception details: Message: The requested name is valid, but no data of the requested type was found Type: System.Net.Sockets.SocketException Stack trace: at System.Net.Dns.GetAddrInfo(String name) at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6) at System.Net.Dns.GetHostAddresses(String hostNameOrAddress) at Microsoft.Exchange.Tools.ExRca.Tests.ResolveHostTest.PerformTestReally() Attempting to locate SRV record _autodiscover._tcp.domain.com in DNS. The Autodiscover SRV record wasn't found in DNS.

  Read the article

• mysql.proc has gone corrupt. How can I fix it?

  - by Metalcoder

  I have a server running Debian 5.0, and MySQL. Suddendly, MySQL stopped working, and after many attempts to fix it, I decided to reinstall it. I installed MySQL 5.1.63, and when started it goes to safe mode. I made some typing, and when I executed mysql_upgrade as root, it complained: ... Running 'mysql_fix_privilege_tables'... ERROR 1548 (HY000) at line 1111: Cannot load from mysql.proc. The table is probably corrupted ERROR 1064 (42000) at line 1112: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'sqlstate 'HY000' set message_text='Unexpected content found in the performance_s' at line 1 ERROR 1548 (HY000) at line 1125: Cannot load from mysql.proc. The table is probably corrupted FATAL ERROR: Upgrade failed I checked the mysql.proc table, and it's comment column was slightly different from my backup. -- My backup says: `comment` char(64) CHARACTER SET utf8 COLLATE utf8_bin NOT NULL DEFAULT '', -- But it were: `comment` text CHARACTER SET utf8 COLLATE utf8_bin NOT NULL, So, I restored my mysql database backup, and now they all match, but mysql_upgrade still trigger the same errors. I also tried do check and repair the mysql.proc table, but got no success.

  Read the article

• Web server with static IP from cable provider

  - by Dmitri

  I have a subscription to 5 static IP addresses. I want to run a web server from behind a router. My network config is as follows: Server's local address is 10.1.10.2, has IIS running on it, port 80 and 443 (IIS is not my fault, had to be done) the server's ip address is static, the subnet mask is 255.255.255.0, gateway is 10.1.10.1, which is the local address of the cable modem / router / gateway thingy. All looks to be in textbook order as far as the LAN goes. I can get to anything on my LAN from any computer on my LAN, whether they have static IP or get it through DHCP from the cable modem/router thingy. however, I have no internet access form any of my LAN computers. I called Comcast tech support and they say they can connect to my modem/router just fine and can actually use it to ping any computer on the internet or any computer on my LAN from the router/modem (i checked, myself, this is in fact the case). However, nothing on my LAN has internet connectivity. I tried pinging the DNS servers, nothing. I tried directly typing in web sites' IP addresses, nothing, so doesn't seem to be a DNS issue. Any Ideas? What malfunction of a router could be causing such weird behavior? nay ideas or educated guesses are very much appreciated.

  Read the article

• Postgresql server will not start

  - by Claudiu

  I'm on Windows 7. I restarted my computer. I then tried to connect to the database and got an error. I don't remember which one in particular but it was some connection issue. I decided to try to restart the server, so I clicked on "Restart server" from the start menu. This blocked. After a few minutes I killed the process and tried again, only to get a "The service is starting or stopping. Please try again later." message. I rebooted the computer again, tried to start again, and got the same error. I killed the pg_ctl process and tried starting it manually, but that didn't work either: C:\Users\DrClaud>cscript "C:\Program Files\PostgreSQL\8.3\scripts\serverctl.vbs" start wait Microsoft (R) Windows Script Host Version 5.8 Copyright (C) Microsoft Corporation. All rights reserved. The PostgreSQL Server 8.3 service is starting................................... ....................................... The PostgreSQL Server 8.3 service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534. The start command returned an error (2) Any ideas?

  Read the article

• Macbook Pro 2010 Ethernet Jumbo Frame(9k MTU) Support?

  - by Troggy

  Has anyone been able to use jumbo frame support on their 2010 Macbook Pros? This is kind of negative news here, but I am seeing many reports that this is not available anymore due to Apple's choice of network card in the new machines. I cannot set my MTU speed over 1500 on my new 2010 MBP i7, but my old early 2008 MBP (Core2) has the 9000 MTU setting for use. Everything I have is setup to use jumbo frames and I thought apple kept that feature in their "pro" lineup. It sounds like the Mac Pro still has it. Did they decide to use a chipset that doesn't support it? I am trying to pinpoint some solid chipset numbers and the feature support. Maybe they just need to update the drivers? Is there some more official information about this feature? This might seem minor, but this is really frustrating if apple removed this feature from their pro laptop line. From what I have read so far, it sounds like I am not alone in my frustrations with this. http://discussions.info.apple.com/message.jspa?messageID=12258067 http://discussions.apple.com/thread.jspa?messageID=12130158 Anyone have any experience or further knowledge about this issue ... beyond typing my question into google and giving the top 5 results as answers? :)

  Read the article

• Don't let the mouse wake up displays from standby

  - by progo

  I like to put my displays to powersave/standby mode when I leave the computer for a while. It would be ok if it weren't for oversensitive mouse. Sometimes the driver reads in some movement that's not visible to the naked eye (the cursor, that is) and it breaks the power save. It would wait for another 10 minutes before going back to its standby. My workaround is the following script bound to C-S-q: xlock -startCmd 'xset dpms 2 2 2' -endCmd 'xset dpms 600 1200 1300' -mode blank -echokeys -timeelapsed +usefirst By using xset I set the values to 2 seconds each before going to standby. It's not nice, anyway. Sometimes there are cool fortunes that I want to read before typing in the password. I could keep the cursor moving but it's cludgy. (By the way, xlock's option mousemotion doesn't help -- it just hides the cursor but the displays fire up nevertheless.) So the question: is there a way to make displays go standby and stay there until a keyboard key is pressed? I'm running gentoo and recent Xorg, but I hope the answer doesn't have to be distro-specific. Basically the answer can be as simple as how to enable/disable mouse within command line? It think that would do the job if DPMS doesn't know the idea.

  Read the article

• Writing a script for ash?

  - by rumtscho

  My VPN is behaving funny sometimes, and I have to restart it often. I wanted to write a script which does that for me. It doesn't have to be anything fancy, just a shortcut for the commands I have to type into the terminal. More specifically: it will look at the running processes. If it finds a running vpnc process, it will kill it. Then it will start vpnc. I've written bash scripts of similar complexity, but now I don't have a bash, only an ash. Until now, the only difference I noticed is that there are much less commands available, but then, I don't use it very often. So I have some questions. Is writing ash scripts different than writing bash scripts? Is there something specific to consider when doing it? When the script is ready, how can I deploy it? For bash, I just put the executable file under /usr/lib and run it by typing the file name into the command line, will this work with ash? Are there any special pitfalls to watch out for in the script I want to write? I think that the killing process part may get hairy, if I write something that kills the wrong process, but even then running the script shouldn't break anything permanently, right?

  Read the article

• P2v options within a hyper-v environment.

  - by tony roth

  I have a server that san boots that I want to p2v. I have many options disk2vhd, scvmm etc but I was thinking about cloning the lun (flexclone, netapp) presenting it to my hyper-v r2 server. Within the hv manager do a create new disk then have it copy the cloned lun to a vhd file. Then do the bcdedit\bootsect stuff to it. Should work right? I'm also curious if anybodys booting vhd's that are on bootable luns? I've booted native vhd's just fine was just curious about the running them off a bootable lun. I think that this has quite a few advantages like instant p2v etc.. any thoughts on this? hmm dang as I was typing this I realized that I should not use the hv manager new disk copy routine, I should just disk2vhd the mounted lun. This has advantages in that it should be a lot faster!! discovered that disk2vhd may be flaky, crashed the first time I ran it! thanks

  Read the article

• SQL SERVER – An Efficiency Tool to Compare and Synchronize SQL Server Databases

  - by Pinal Dave

  There is no need to reinvent the wheel if it is already invented and if the wheel is already available at ease, there is no need to wait to grab it. Here is the similar situation. I came across a very interesting situation and I had to look for an efficient tool which can make my life easier and solve my business problem. Here is the scenario. One of the developers had deleted few rows from the very important mapping table of our development server (thankfully, it was not the production server). Though it was a development server, the entire development team had to stop working as the application started to crash on every page. Think about the lost of manpower and efficiency which we started to loose.  Pretty much every department had to stop working as our internal development application stopped working. Thankfully, we even take a backup of our development server and we had access to full backup of the entire database at 6 AM morning. We do not take as a frequent backup of development server as production server (naturally!). Even though we had a full backup, the solution was not to restore the database. Think about it, there were plenty of the other operations since the last good full backup and if we restore a full backup, we will pretty much overwrite on the top of the work done by developers since morning. Now, as restoring the full backup was not an option we decided to restore the same database on another server. Once we had restored our database to another server, the challenge was to compare the table from where the database was deleted. The mapping table from where the data were deleted contained over 5000 rows and it was humanly impossible to compare both the tables manually. Finally we decided to use efficiency tool dbForge Data Compare for SQL Server from DevArt. dbForge Data Compare for SQL Server is a powerful, fast and easy to use SQL compare tool, capable of using native SQL Server backups as metadata source. (FYI we Downloaded dbForge Data Compare) Once we discovered the product, we immediately downloaded the product and installed on our development server. After we installed the product, we were greeted with the following screen. We clicked on the New Data Comparision to start our new comparison project. It brought up following screen. Here is the best part of the product, we just had to enter our database connection username and password along with source and destination details and we are done. The entire process is very simple and self intuiting. The best part was that for the source, we can either select database or even backup. This was indeed fantastic feature. Think about this, if you have a very big database, it will take long time to restore on the server. Once it is restored, you will be able to work with it. However, when you are working with dbForge Data Compare it will accept database backup as your source or destination. Once I click on the execute it brought up following screen where it displayed an excellent summary of the data compare. It has dedicated tabs for the what is changing in what table as well had details of the changed data. The best part is that, once we had reviewed the change. We click on the Synchronize button in the menu bar and it brought up following screen. You can see that the screen has very simple straight forward but very powerful features. You can generate a script to synchronize from target to source or even from source to target. Additionally, the database is a very complicated world and there are extensive options to configure various database options on the next screen. We also have the option to either generate script or directly execute the script to target server. I like to play on the safe side and I generated the script for my synchronization and later on after review I deployed the scripts on the server. Well, my team and we were able to get going from our disaster in less than 10 minutes. There were few people in our team were indeed disappointed as they were thinking of going home early that day but in less than 10 minutes they had to get back to work. There are so many other features in  dbForge Data Compare for SQL Server, I am already planning to make this product company wide recommended product for Data Compare tool. Hats off to the team who have build this product. Here are few of the features salient features of the dbForge Data Compare for SQL Server Perform SQL Server database comparison to detect changes Compare SQL Server backups with live databases Analyze data differences between two databases Synchronize two databases that went out of sync Restore data of a particular table from the backup Generate data comparison reports in Excel and HTML formats Copy look-up data from development database to production Automate routine data synchronization tasks with command-line interface Go Ahead and Download the dbForge Data Compare for SQL Server right away. It is always a good idea to get familiar with the important tools before hand instead of learning it under pressure of disaster. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL, Technology

  Read the article

• How a batch file runs on a remote machine started by PSEXEC

  - by user38780

  I am having an issue running a Batch file on a remote machine suing PSEXEC. The file runs but does not run like it does when run through remote desktop. The batch runs a file which is a 32 bit application, which opens multiple 16bit applications, this should all run under one ntvdm.exe (In one Memory Space). Through remote desktop the batch file runs under the explorer process, and works correctly opening only one ntvdm.exe. Using PSEXEC the batch runs but not under the explorer process, a separate ntvdm.exe is open for each process. I found running the batch from explorer in PSEXEC works, but comes up with a "File Download - Security Warning" eg. psexec.exe" \compname -u username -p passowrd -s -d -i 0 explorer C:\Program.bat I want to be able to run the batch successfully without receiving warnings, it is a local warning and not a network share warning. Possible to recreate warning typing "explorer C:\windows\system32\cmd.exe" in Run I would like to know if anyone knows of a way to get PSEXEC to open the batch file to run as though it was started by explorer. Or a way of removing the local "File Download - Security Warning" Thanks

  Read the article

• SSH garbling characters in vim/nano on remote server

  - by geerlingguy

  ... and it's driving me insane. Basically (this has been happening over the past couple months), I log into a few different CentOS servers (one Linode, another VPS, and a shared host to which I have shell access), running 5.5, 5.7, and 6, from my Mac running OS X Lion, using Terminal. Basically: $ ssh [email protected] [remote-host] $ nano somefile.txt Once I start editing the file, if I use the arrow keys to move around the cursor, or start deleting, then typing again, the cursor jumps around a bit, and if I save the file and reopen it, it's obvious that the cursor was, in fact, jumping all over the place on a line for no apparent reason. I end up getting things like "This is a neof text." When I had typed in (to the cursor-crazy editor) "This is a line of text." It's a big problem when it comes to editing configuration files, because I often have to edit one line, save and close, then reopen just to make sure that line is right... then edit another line... and it's getting quite annoying. I found Linode Lish Shell Vim and Nano rendering troubles: lines not appearing / cursor positions wrong, but I don't know if that relates much, since that's specifically referring to lish.

  Read the article

• What's the best way to telnet from a remote Windows PC without using RDP?

  - by Rob D.

  Three Networks: 10.1.1.0 - Mine 172.1.1.0 - My Branch Office 172.2.2.0 - My Branch Office's VOIP VLAN. My PC is on 10.1.1.0. I need to telnet into a Cisco router on 172.2.2.0. The 10.1.1.0 network has no routes to 172.2.2.0, but a VPN connects 10.1.1.0 to 172.1.1.0. Traffic on 172.1.1.0 can route to 172.2.2.0. All PCs on 172.1.1.0 are running Windows XP. Without disrupting anyone using those PCs, I want to open a telnet session from one of those PCs to the router on 172.2.2.0. I've tried the following: psexec.exe \\branchpc telnet 172.2.2.1 psexec.exe \\branchpc cmd.exe telnet 172.2.2.1 psexec.exe \\branchpc -c plink -telnet 172.2.2.1 Methods 1 and 2 both failed because telnet.exe is not usable over psexec. Method 3 actually succeeded in creating the connection, but I cannot login because the session registers my carriage return twice. My password is always blank because at the "Username:" prompt I'm effectively typing: Routeruser[ENTER][ENTER] It's probably time to deploy WinRM... Does anyone know of any other alternatives? Does anyone know how I can fix plink.exe so it only receives one carriage return when I use it over psexec?

  Read the article

• DNS setup problems with Windows Azure VPS

  - by jbigelow

  What is the proper to setup the A record (or CNAME) for a Windows Azure VPS? I can't connect to my website after setting up IIS and believe I don't have the correct DNS setup. I created a small VPS instance with the default Windows Server 2012 configuration. I RDP'd in and added the Webserver role. In my DNSMadeEasy control panel I added an A record with my Public Virtual IP Address. In IIS I went to the default website and added bindings for the hostname of my website, so I should be able to type mywebsite.com and see the IIS 8 splash screen, but instead my browser cannot connect. I attempted to navigate to the site by typing in my Virtual IP address into the browser and still cannot connect. I RDP'd back into the machine and turned off Windows Firewall. No change, still cannot navigate to my website. From within IIS I double checked my binding. If I click "browse *:80" I can bring up my website in IE with the http:// localhost address. If I click "browse mywebsite on *.80" IE says "This page cannot be displayed.", from within the RDP session I can view the site if I navigate to http:// 127.0.0.1 but not if I navigate to my Virtual IP, nor can I view the page if I try navigating to http:// mywebservername.cloudapp.net I'm thinking I must be fundamentally not understanding how do DNS setup with Azure VPS but my initial Google searches aren't turning up any helpful information. (spaces added after the http:// so serverfault doesn't try and render them as valid urls.)

  Read the article

• Windows Server 2003 DHCP not handing out IPs

  - by SnOrfus

  I'm trying to setup a home server (to tinker with) as a domain controller. I've setup the domain and I've installed DHCP and setup a scope without any exclusions (with the default range of 192.168.0.1-254). My client machine is a Windows 7 (RC) machine and it has a connection but can't get an IP address. Even if I try setting the IP to a static 192.168.0.2 and there is still no connectivity. I can ping it from the server, but pinging the server from the client just times out. The only thing between the server and the client is a 24 port switch (D-Link DES-1024D). edit Ok, it turned out that the interfaces were setup backwards in the NAT settings (the internal nic connection was set to public and the external nic connection was set to private). I changed this and all was OK.... sort-of. Problem is now: If I set a static ip on the client (where I am typing this from) all is fine. BUT; when I set it to get it from DHCP, I get a correct IP from the server (192.168.0.2) but there is no internet on the client; but I can still ping the server fine from the client (which makes sense cause I was able to get an IP from it). edit I ended up just removing the Routing and DHCP server roles and just going with ICS for the time being until I get my hands on some better learning tools.

  Read the article

• Time not propagating to machines on Windows domain

  - by rbeier

  We have a two-domain Active Directory forest: ourcompany.com at the root, and prod.ourcompany.com for production servers. Time is propagating properly through the root domain, but servers in the child domain are unable to sync via NTP. So the time on these servers is starting to drift, since they're relying only on the hardware clock. WHen I type "net time" on one of the production servers, I get the following error: Could not locate a time-server. More help is available by typing NET HELPMSG 3912. When I type "w32tm /resync", i get the following: Sending resync command to local computer The computer did not resync because no time data was available. "w32tm /query /source" shows the following: Free-running System Clock We have three domain controllers in the prod.ourcompany.com subdomain (overkill, but the result of a migration - we haven't gotten rid of one of the old ones yet.) To complicate matters, the domain controllers are all virtualized, running on two different physical hosts. But the time on the domain controllers themselves is accurate - the servers that aren't DCs are the ones having problems. Two of the DCs are running Server 2003, including the PDC emulator. The third DC is running Server 2008. (I could move the PDC emulator role to the 2008 machine if that would help.) The non-DC servers are all running Server 2008. All other Active Directory functionality works fine in the production domain - we're only seeing problems with NTP. I can manually sync each machine to the time source (the PDC emulator) by doing the following: net time \\dc1.prod.ourcompany.com /set /y But this is just a one-off, and it doesn't cause automated time syncing to start working. I guess I could create a scheduled task which runs the above command periodically, but I'm hoping there's a better way. Does anyone have any ideas as to why this isn't working, and what we can do to fix it? Thanks for your help, Richard

  Read the article

• Running multiple services on different servers with IPv6 and a FQDN

  - by Mark Henderson

  One of the things NAT has permitted us to do in the past decade is split physical services onto different servers whilst hiding behind a single interface. For example, I have example.com behind a NAT on 192.0.2.10. I port-forward :80 and :443 to my web server. I'm also port forward :25 to my mail server, and :3389 to a terminal server and :8080 to the web interface of my computer that downloads torrents, and the story goes on. So I have 5 port forwardings going to 4 different computers on example.com. Then, I go and get me some neat IPv6. I assign example.com an IPv6 address of 2001:db8:88:200::10. That's great for my websites, but I want to go to example.com:8080 to get to my torrents, or example:3389 to log on to my terminal server. How can I do this with IPv6, as there is no NAT. Sure, I could create a bunch of new DNS entries for each new service, but then I have to update all my clients who are used to just typing example.com to get to either the website or the terminal server. My users are dumber than two bricks so they won't remember to connect to rdp.example.com. What options do I have for keeping NAT-style functionality with IPv6? In case you haven't figured it out, the above scenario is not a real scenario for me, or perhaps anyone yet, but it's bound to happen eventually. You know, with devops and all.

  Read the article

• INFORMIX - listener thread err 25582

  - by Samuel Lao

  I´ve been digging different forums in the last 7 days looking for a possible solution.... Our database is based on informix running in a Linux server (LINUX SUSE 11). Suddenly, last saturday informix began to show an error message: listener-thread err=-25582 oserr=0, network connection is broken End users started to call reporting about slow network performance to this server, moments where the database application lost connection with server...so we proceeded doing a ping to the db server, getting good responses (1ms) without losing packets. I tried typing telnet (ipserver) 1526 which is informix's port for the application, it works. We had to disconnect the server and enable a backup db server which is located on another branch. It has been working in a regular way because the backup server hasn´t good specs (it is an old dell server model). So, I scanned the main server looking for viruses using Trend Micro Server Protect, it didn´t find anything (0 viruses and spywares). I revised the switches and routers, but I haven´t find anything strange... What else could be ? Thanks in advanced for your time and help with this issue.....I would really appreciate any advice...

  Read the article

• Booting VM Directly from iSCSI (or FC) in Hyper-V R2

  - by tony roth

  I have a server that san boots that I want to p2v. I have many options disk2vhd, scvmm etc but I was thinking about cloning the lun (flexclone, netapp) presenting it to my hyper-v r2 server. Within the hv manager do a create new disk then have it copy the cloned lun to a vhd file. Then do the bcdedit\bootsect stuff to it. Should work right? I'm also curious if anybodys booting vhd's that are on bootable luns? I've booted native vhd's just fine was just curious about the running them off a bootable lun. I think that this has quite a few advantages like instant p2v etc.. any thoughts on this? hmm dang as I was typing this I realized that I should not use the hv manager new disk copy routine, I should just disk2vhd the mounted lun. This has advantages in that it should be a lot faster!! discovered that disk2vhd may be flaky, crashed the first time I ran it! thanks

  Read the article

• Compaq R4000 laptop randomly locking up

  - by Josh

  I have a Compaq R4000 laptop with 2GB of RAM, running Ubuntu Linux 9.10. It is randomly locking up on me, approximately once every two days. I have a second partition with Windows XP Home installed, and I have had the system lock up in XP as well, meaning I believe this is a hardware issue. I have run two passes of Memtest86+ with no errors. The system has a fan that has died, so I initially suspected overheating. However the system just locked up on me while I was in the middle of typing a script to warn me / shut down if the temperature was too high. When the lockup happened the temperature was 88°F, so I am now starting to believe that may not be the issue. When the system locks up, I cannot SSH in nor ping it. Nothing shows in syslog when I reboot. I have configured it to send syslog messages to a local server as well and no messages appear on that server when the lockup happens. I am open to any and all advice!

  Read the article

• Windows Server 2003 DHCP not handing out IPs

  - by SnOrfus

  I'm trying to setup a home server (to tinker with) as a domain controller. I've setup the domain and I've installed DHCP and setup a scope without any exclusions (with the default range of 192.168.0.1-254). My client machine is a Windows 7 (RC) machine and it has a connection but can't get an IP address. Even if I try setting the IP to a static 192.168.0.2 and there is still no connectivity. I can ping it from the server, but pinging the server from the client just times out. The only thing between the server and the client is a 24 port switch (D-Link DES-1024D). edit Ok, it turned out that the interfaces were setup backwards in the NAT settings (the internal nic connection was set to public and the external nic connection was set to private). I changed this and all was OK.... sort-of. Problem is now: If I set a static ip on the client (where I am typing this from) all is fine. BUT; when I set it to get it from DHCP, I get a correct IP from the server (192.168.0.2) but there is no internet on the client; but I can still ping the server fine from the client (which makes sense cause I was able to get an IP from it). edit I ended up just removing the Routing and DHCP server roles and just going with ICS for the time being until I get my hands on some better learning tools.

  Read the article

• Changing order of Thunderbird email address autocomplete?

  - by Brooks Moses

  I recently did a system wipe and installed Thunderbird 3.0, and imported all of my email setup from a previous Thunderbird 2.0 installation. Almost everything is working fine, but I'm having a problem with the autocomplete in email addresses when writing messages. The relevant behavior is this: In the old 2.0 installation, the autocomplete appeared to know which email addresses I used most frequently, and so when I typed "m" in the address line, it would pick as the default selection the "m"-person who I frequently write email to. (It's possible this is an illusion and it simply picked people in the order I added them to my address book.) Thus, I have become used to typing "m"-"enter" in the address field, and getting this person. In the current 3.0 installation, however, the autocomplete order has changed. It's not the same as it was, and it's not alphabetical. The result is that I'm spending extra time looking at the email address bar, and more annoyingly, half the time the old muscle-memory kicks in and I find myself with an email that's addressed to a couple of customers rather than to my boss and coworker. Thus, two questions: How does Thunderbird determine this autocomplete order, among a set of addresses all of which are in the same address book? How can I change this ordering to be what I want? (I have tried Google-searching, and found a number of incomplete answers, nearly all of which were for version 1.0 or thereabouts, and reference settings dialog boxes that no longer exist.)

  Read the article

• How do I create and conveniently search through Libraries in Windows 8?

  - by mtone

  In Windows 7, I took the habit of putting most of my frequently accessed disk areas as Libraries - there were about a dozen. Typing a word in the Start menu would then give me a summary of matches by Library. For example, searching for "WPF" would tell me that I've got some results in the Books library, in the Coding library and a few other PDFs in the Downloads library, one of which I could then expand to see all results within. In Windows 8, that functionality appears to be gone. The Search function in the Charms Bar lists tons of results by type (Documents, Pictures, et cetera) but not by Library. This is practically useless since Documents contains hundreds of .txt and .cs files, a few of which might be Books or Downloads. The only option I found is to go into Explorer and use the search bar in the Library section. However, there again, all search results are mixed together, and I can't seem to find a way to know which Library each result came from (in the Details view, I didn't find a Library column I could add). So, if I want to know which Library contains stuff about a given topic, I have to search the Libraries one by one. Very inconvenient. Is Microsoft slowly deprecating libraries? Any tips? How else can I search through libraries?

  Read the article

• Google Chrome doesn't respond user actions correctly

  - by Carlos A. Junior

  Recently I've changed my OS to Ubuntu 12.04 (Cinnamon, 64 bits) from Mint 13 (KDE, 64 bits) and one same bug still appears on new installation. The Google Chrome it seems that don't refresh (repaint) page based on my interactions. Example: When i'm try comment an Youtube vídeo, when i click on textarea, o cursor don't appear inside of textarea, BUT, when/if i change to another tab and return the cursor appears...OK... If i start write some text...according i'm typing the chars don't appers...again if i change to another tab and return the typed text appears on textarea. Other cases that this bug appears: Modal boxes link...don't show the modal; Forms inside modal boxes don't show typed chars; The common Discus comment plugin don't work when focused; I don't have any idea of reason of this bug. (video driver, window manager, Chrome bug ?, i don't know) Any idea to solve this ? Additional informations: Google Chrome 22.0.1229.79 (Official Build 158531) OS Linux WebKit 537.4 (@129177) JavaScript V8 3.12.19.11 Flash 11.3.31.331 User Agent Mozilla/5.0 (X11; Linux i686) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.79 Safari/537.4 Command Line /opt/google/chrome/google-chrome --flag-switches-begin --flag-switches-end Executable Path /opt/google/chrome/google-chrome Profile Path /home/carlos/.config/google-chrome/Default Kernel version: 3.2.0-31-generic-pae Ubuntu 12.04 Best regards.

  Read the article

• Windows 7 PC cannot see some LAN PCs, but can access them via path

  - by zoot

  In an office LAN, with Windows 7 Professional workstations and a FreeNAS Samba server, 2 workstations have intermittent problems in browsing for the other workstations, as well as the FreeNAS server. However, so far, it appears that typing in the path to any of the workstations which aren't visible via the "browse" function, works. ie. the machine Workstation7 is not visible while browsing via Windows Explorer, but is accessible if I type \\Workstation7 in the path field. Occasionally the workstations exhibiting these symptoms show errors that their connection to the FreeNAS server has failed and only rebooting resolves the issue. All other workstations on the network use identical Windows 7 Professional installations and never have these problems. I've checked all machines and they're not using Home Groups. All are setup on the same WorkGroup as the FreeNAS server and the network type is set to Work Network. Temporarily disabling the firewall on the workstations with the issue made no difference, so I know this has nothing to do with the firewall settings. Any pointers would be appreciated. Thanks.

  Read the article

• Apache Alias Isn't In Directory Listing

  - by Phunt

  I've got a site running on my home server that's just a front end for me to grab files remotely. There's no pages, just a directory listing (Options Indexes...). I wanted to add a link to a directory outside of the webroot so I made an alias. After a minute of dealing with permissions, I can now navigate to the directory by typing the URL into the browser, but the directory isn't listed in the root index. Is there a way to do this without creating a symlink in the root? Server: Ubuntu 11.04, Apache 2.2.19 Relevant vhost: <VirtualHost *:80> ServerName some.url.net DocumentRoot "/var/www/some.url.net" <Directory /var/www/some.url.net> Options Indexes FollowSymLinks AllowOverride None Order Allow,Deny Allow From All AuthType Basic AuthName "TPS Reports" AuthUserFile /usr/local/apache2/passwd/some.url.net Require user user1 user2 </Directory> Alias /some_alias "/media/usb_drive/extra files" <Directory "/media/usb_drive/extra files"> Options Indexes FollowSymLinks Order Allow,Deny Allow From All </Directory> </VirtualHost>

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >