Search Results

Search found 14546 results on 582 pages for 'mod authz host'.

Page 92/582 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

  • Two Network Adapters on Hyper-V Host - Best way to configure?

    - by GoNorthWest
    Hi, I have two physical network adapters installed in my Hyper-V host. I want one to be dedicated to the host, and the other to provide external network services to the VMs. Would the appropriate configuration be as such: Leave the first physical network adapter alone, assigning it the host IP, but not using it to create any Virtual Netorks For the second physical adapter, I would create an External Network, along with a Microsoft Virtual Switch, and use that to provide network services to the VMs. Each virtual NIC for the VM would be associated with that External Network. A static IP would be assigned to this adapter, and each VM would be assigned a static IP as well. The above seems reasonable to me, but I'm not sure if it's correct. Does anyone have any thoughts? Thanks! Mark

    Read the article

  • How do I make Linux recognize a new SATA /dev/sda drive I hot swapped in without rebooting?

    - by Philip Durbin
    Hot swapping out a failed SATA /dev/sda drive worked fine, but when I went to swap in a new drive, it wasn't recognized: [root@fs-2 ~]# tail -18 /var/log/messages May 5 16:54:35 fs-2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen May 5 16:54:35 fs-2 kernel: ata1: SError: { PHYRdyChg CommWake } May 5 16:54:40 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:45 fs-2 kernel: ata1: device not ready (errno=-16), forcing hardreset May 5 16:54:45 fs-2 kernel: ata1: soft resetting link May 5 16:54:50 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:55 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:54:55 fs-2 kernel: ata1: soft resetting link May 5 16:55:00 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:05 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:05 fs-2 kernel: ata1: soft resetting link May 5 16:55:10 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:40 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:40 fs-2 kernel: ata1: limiting SATA link speed to 1.5 Gbps May 5 16:55:40 fs-2 kernel: ata1: soft resetting link May 5 16:55:45 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:45 fs-2 kernel: ata1: reset failed, giving up May 5 16:55:45 fs-2 kernel: ata1: EH complete I tried a couple things to make the server find the new /dev/sda, such as rescan-scsi-bus.sh but they didn't work: [root@fs-2 ~]# echo "---" > /sys/class/scsi_host/host0/scan -bash: echo: write error: Invalid argument [root@fs-2 ~]# [root@fs-2 ~]# /root/rescan-scsi-bus.sh -l [snip] 0 new device(s) found. 0 device(s) removed. [root@fs-2 ~]# [root@fs-2 ~]# ls /dev/sda ls: /dev/sda: No such file or directory I ended up rebooting the server. /dev/sda was recognized, I fixed the software RAID, and everything is fine now. But for next time, how can I make Linux recognize a new SATA drive I have hot swapped in without rebooting? The operating system in question is RHEL5.3: [root@fs-2 ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.3 (Tikanga) The hard drive is a Seagate Barracuda ES.2 SATA 3.0-Gb/s 500-GB, model ST3500320NS. Here is the lscpi output: [root@fs-2 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) Update: In perhaps a dozen cases, we've been forced to reboot servers because hot swap hasn't "just worked." Thanks for the answers to look more into the SATA controller. I've included the lspci output for the problematic system above (hostname: fs-2). I could still use some help understanding what exactly isn't supported hardware-wise in terms of hot swap for that system. Please let me know what other output besides lspci might be useful. The good news is that hot swap "just worked" today on one of our servers (hostname: www-1), which is very rare for us. Here is the lspci output: [root@www-1 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 09:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS (rev 04)

    Read the article

  • How do I make Linux recognize a new SATA /dev/sda drive I hot swapped in without rebooting?

    - by Philip Durbin
    Hot swapping out a failed SATA /dev/sda drive worked fine, but when I went to swap in a new drive, it wasn't recognized: [root@fs-2 ~]# tail -18 /var/log/messages May 5 16:54:35 fs-2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen May 5 16:54:35 fs-2 kernel: ata1: SError: { PHYRdyChg CommWake } May 5 16:54:40 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:45 fs-2 kernel: ata1: device not ready (errno=-16), forcing hardreset May 5 16:54:45 fs-2 kernel: ata1: soft resetting link May 5 16:54:50 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:55 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:54:55 fs-2 kernel: ata1: soft resetting link May 5 16:55:00 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:05 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:05 fs-2 kernel: ata1: soft resetting link May 5 16:55:10 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:40 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:40 fs-2 kernel: ata1: limiting SATA link speed to 1.5 Gbps May 5 16:55:40 fs-2 kernel: ata1: soft resetting link May 5 16:55:45 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:45 fs-2 kernel: ata1: reset failed, giving up May 5 16:55:45 fs-2 kernel: ata1: EH complete I tried a couple things to make the server find the new /dev/sda, such as rescan-scsi-bus.sh but they didn't work: [root@fs-2 ~]# echo "---" > /sys/class/scsi_host/host0/scan -bash: echo: write error: Invalid argument [root@fs-2 ~]# [root@fs-2 ~]# /root/rescan-scsi-bus.sh -l [snip] 0 new device(s) found. 0 device(s) removed. [root@fs-2 ~]# [root@fs-2 ~]# ls /dev/sda ls: /dev/sda: No such file or directory I ended up rebooting the server. /dev/sda was recognized, I fixed the software RAID, and everything is fine now. But for next time, how can I make Linux recognize a new SATA drive I have hot swapped in without rebooting? The operating system in question is RHEL5.3: [root@fs-2 ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.3 (Tikanga) The hard drive is a Seagate Barracuda ES.2 SATA 3.0-Gb/s 500-GB, model ST3500320NS. Here is the lscpi output: [root@fs-2 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) Update: In perhaps a dozen cases, we've been forced to reboot servers because hot swap hasn't "just worked." Thanks for the answers to look more into the SATA controller. I've included the lspci output for the problematic system above (hostname: fs-2). I could still use some help understanding what exactly isn't supported hardware-wise in terms of hot swap for that system. Please let me know what other output besides lspci might be useful. The good news is that hot swap "just worked" today on one of our servers (hostname: www-1), which is very rare for us. Here is the lspci output: [root@www-1 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 09:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS (rev 04)

    Read the article

  • How to connect XP mode VM to the host so as to simulate LAN Activities?

    - by rsjethani
    First of all my PC config: Host:Windows 7(32-bit) Guest: Windows XP SP3 as XP Mode. Integration Features Disabled(I don't think it has any thing to do with networking). Network Connections on Host : 1.Local Area Connection(Realtek...) - unplugged(as no other PC is connected). 2.Nokia 2730 classic USB Modem - I use this connect to the internet. Now,How can I connect the guest to the host as if they were on a LAN. Please give specific steps as I am using Windows XP Mode/Virtual machine for the first time.

    Read the article

  • Can I temporarily leave other roles active when converting a 2008 R2 server to a hyper-v host?

    - by Eric
    I currently have a Windows 2008 R2 box that I want to convert to a hyper-v host. Currently I have the following running on it: File Services, Web Server (IIS), and Sql Server 2008 R2 with a few different DBs. In the long term, I'd like to move all of those over to the VMs that will be created. However, in the short term I'd like to leave them running on the server. Are there any complications/problems with leaving them running on the hyper-v server for a day or two? How long will those services typically go down during the addition of the hyper-v role? Right now my plan is to back up everything, enable the hyper-v role, set up VMs, and migrate stuff off of the host. However, if there is a good probability that something may cease to function I might need to migrate everything over to a temporary host before doing the conversion.

    Read the article

  • Cacti is not monitoring the correct host... How do I change SNMP target?

    - by wil
    I have been handed a Cacti server that monitors a few hosts. I noticed that three of the targets were displaying the exact same data - the cacti machine, machine a and machine b. After doing a bit of digging, I noticed that machine a and machine b had "Local Linux Machine" set under "Host Template". I have since changed the host template to "Generic SNMP-enabled Host", however, all the graphs still only display data from the local cacti machine (Updates every 5 minutes - I changed this yesterday - 12 hours). I can't think what else is wrong and was wondering if anyone knows/can recommend anything?

    Read the article

  • Virtual PC "The page cannot be displayed" error connecting to iis7.5 site on Win7 host.

    - by stan
    I setup virtual pc with the Windows XP IE6 VHD to test a site on Windows 7 host. I created a loopback adapter connection on the host. I have several sites on IIS 7.5, I'm able to connect to all of them except one. And it's the site I need to test... I get "The page cannot be displayed" error. The site loads fine from the host(Windows 7). I've made sure the permissions match that of the other sites that do load. I've recreated the application in IIS manager. Does anyone know what the problem might be?

    Read the article

  • AppFabric named cache, what happens if you lose a cache host?

    - by Liam
    I'm getting my head around how app fabric clustering works and there's something I'm not sure about. Given a structure where we have one named cache, with two lead hosts and (say) three cache hosts and high availability turned off and the lead host(s) performing the management role. When one cache host goes down do you loose the data that was on that cache host? In this MSDN article it states: Data on the non-lead hosts would be lost (assuming high availability was not enabled), but the rest of the cluster could continue serving and storing data But I was unsure if redundancy is built into the system. Would you loose x amount of data or would one of the other cache hosts store this data also and pick up the slack?

    Read the article

  • Deploying virtual machines - Windows Guest/Linux Host or vice versa?

    - by samoz
    I'm looking to deploy several virtual machines for users. They need access to both Windows and Linux. They also need to use the computers graphics card (for Photoshop, modeling, etc) under Windows. My question is, will an Ubuntu host/Windows guest or a Windows host/Ubuntu guest be faster? I'm somewhat worried about Windows getting a cluttered registry and slow, but on the otherhand, a Windows host would have direct access to hardware (Unless I'm just unaware of how to grant hardware access to a guest). Does the choice of software (VMware or VirtualBox) effect the choice?

    Read the article

  • Two Network Adapters on Hyper-V Host - Best way to configure?

    - by GoNorthWest
    I have two physical network adapters installed in my Hyper-V host. I want one to be dedicated to the host, and the other to provide external network services to the VMs. Would the appropriate configuration be as such: Leave the first physical network adapter alone, assigning it the host IP, but not using it to create any Virtual Netorks For the second physical adapter, I would create an External Network, along with a Microsoft Virtual Switch, and use that to provide network services to the VMs. Each virtual NIC for the VM would be associated with that External Network. A static IP would be assigned to this adapter, and each VM would be assigned a static IP as well. The above seems reasonable to me, but I'm not sure if it's correct. Does anyone have any thoughts? Thanks! Mark

    Read the article

  • Should the virtualization host be allowed to run any service?

    - by Giordano
    I recently setup a virtualization server for the small company I'm running. This server runs few virtual machines that are used for development, testing, etc... My business partner works from a remote location, thus I also installed a vpn server on the virtualization host to make it possible for him to safely reach the company services. Moreover, again on the virtualization host, I installed bacula to perform the backup of the data. Is it advisable/good practice to do so or should I create one more virtual machine to do backups and VPN? Is it a bad idea to run these services on the host itself? If yes, why? Thanks in advance!

    Read the article

  • Powershell: Install-dotNET4 function

    - by marc dekeyser
    This function will download and install ,NET 4.0. It uses the Get-Framework-Versions function to determine if the installation is necessary or not. Internet Connectivity will be required as the script auto downloads the setup file (and sleeps for 360 seconds... I had a function in there to monitor for install completion at first, turns out the setup file spawns so many childprocesses the function just got confused and locked up -_-)Alternatively you could drop the installation file in the folder specified on the $folderPath variable too. That will skip the download and use the file. This function easily adapts in to other versions f.e. I use it for Powershell 3 installs as well!Function install-dotNet4 () {    if(($InstalledDotNET -eq "4.0") -or ($InstalledDotNET -eq "4.0c")){        write-host ".NET 4.0 Framework is already installed" -foregroundcolor Green    } else{            #set a var for the folder you are looking for        $folderPath = 'C:\Temp'        #Check if folder exists, if not, create it        if (Test-Path $folderpath){            Write-Host "The folder $folderPath exists." -ForeGroundColor Green        } else{            Write-Host "The folder $folderPath does not exist, creating..." -NoNewline -ForegroundColor Red            New-Item $folderpath -type directory | Out-Null            Write-Host " - done!" -ForegroundColor Green        }        # Check if file exists, if not, download it        $file = $folderPath+"\dotNetFx40_Full_x86_x64.exe"        if (Test-Path $file){            write-host "The file $file exists." -ForeGroundColor Green        } else {            #Download Microsoft .Net 4.0 Framework            Write-Host "Downloading Microsoft .Net 4.0 Framework..." -nonewline -ForeGroundColor DarkYellow            $clnt = New-Object System.Net.WebClient            $url = "http://download.microsoft.com/download/9/5/A/95A9616B-7A37-4AF6-BC36-D6EA96C8DAAE/dotNetFx40_Full_x86_x64.exe"            $clnt.DownloadFile($url,$file)            Write-Host " - done!" -ForegroundColor Green        }        #Install Microsoft .Net Framework        Write-Host "Installing Microsoft .Net Framework..." -nonewline -ForegroundColor DarkYellow        $dotNET4 = $folderPath+"\dotNetFx40_Full_x86_x64.exe /quiet /norestart"        Invoke-Expression $dotNET4        write-host " - done!" -ForegroundColor Green        start-sleep -seconds 360    }}

    Read the article

  • Can't install the wireless driver in HP Pavilion dv2419us

    - by maqtanim
    I've just installed Ubuntu 13.04 in an old HP Pavilion dv2419us. The problem is, Ubuntu doesn't detect the wireless card. But it works fine in Windows 7. The following command returns nothing! lspci -vvnn | grep 14e4 And the lspci output is: 00:00.1 RAM memory: NVIDIA Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: NVIDIA Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: NVIDIA Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: NVIDIA Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: NVIDIA Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: NVIDIA Corporation C51 [GeForce Go 6150] (rev a2) 00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: NVIDIA Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: NVIDIA Corporation MCP51 PMU (rev a3) 00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev f1) 00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev f1) 00:10.0 PCI bridge: NVIDIA Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 05:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 05:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 05:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 05:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) The command lspci -nn | grep 0280 gives no output. Any suggestion regarding this?

    Read the article

  • Computer becomes unreachable on lan after some time

    - by Ashfame
    I work on my laptop and ssh into my desktop. I use a lot of key based authentication for many servers for work but recently I couldn't login because ssh would pick up and try all the keys and it stops trying before ultimately falling back to password based login. So right now I am using this command: ssh -X -o PubkeyAuthentication=no [email protected] #deskto The issue is after sometime the desktop would just become unreachable from laptop. I won't be able to open its localhost through IP and today I tried ping'in it and found a weird thing. Instead of 192.168.1.4, it tries to ping 192.168.1.3 which I am sure is the root cause as it just can't reach 192.168.1.4 when its actually trying for 192.168.1.3 Ping command output: ashfame@ashfame-xps:~$ ping 192.168.1.4 PING 192.168.1.4 (192.168.1.4) 56(84) bytes of data. From 192.168.1.3 icmp_seq=1 Destination Host Unreachable From 192.168.1.3 icmp_seq=2 Destination Host Unreachable From 192.168.1.3 icmp_seq=3 Destination Host Unreachable From 192.168.1.3 icmp_seq=4 Destination Host Unreachable From 192.168.1.3 icmp_seq=5 Destination Host Unreachable From 192.168.1.3 icmp_seq=6 Destination Host Unreachable From 192.168.1.3 icmp_seq=7 Destination Host Unreachable From 192.168.1.3 icmp_seq=8 Destination Host Unreachable From 192.168.1.3 icmp_seq=9 Destination Host Unreachable ^C --- 192.168.1.4 ping statistics --- 10 packets transmitted, 0 received, +9 errors, 100% packet loss, time 9047ms pipe 3 Also the ping command message comes in multiple and not one by one. (izx answer's the weirdness I thought there was in ping command.) I did check for desktop, its local IP is still the same, so something is going on in my laptop. Any ideas? P.S. - Laptop runs Ubuntu 12.04 & Desktop runs Ubuntu 11.10 Laptop is connected through wifi to router and Desktop is connected through LAN to router. Update: Even after setting up static IP leases in router settings, I again ran into this issue.

    Read the article

  • How to bridge Debian guest VM to VPN via Cisco AnyConnect Client running on Windows Vista host

    - by bgoodr
    I am running Cisco Anyconnect VPN Client version 2.5.3054 on a laptop running Windows Vista Home Premium (version 6.0.6002) Service Pack 2. I am running the VMware Player version 4.0.2 build-591240. The host operating system running under VMware Player is Debian 6.0.2.1 i386. The laptop is connected to a wireless connection, and I can browse the web from Windows Vista using Firefox just fine. I am able to boot into the Debian VM and open up a browser and access websites on the WAN from within the VM just fine. I can ping real Linux hosts on my LAN via: ping <lan_system>.local where <lan_system> is the hostname returned from uname -a on that system on my LAN. From a DOS CMD shell, I am able to ping hosts that exist on the remote network served by the Cisco AnyConnect Client's VPN network (and without the .local suffix applied as above): ping <remote_system> However, from within the Debian VM, I expect to be able to also ping those same remote hosts (<remote_system>) that are tunnelled over the VPN set up by Cisco AnyConnect Client. Let's say that I can ping a <remote_system> called flubber from a DOS CMD prompt just fine. When I execute Linux ping command from inside the Debian VM via: ping flubber It returns immediately with this output: ping: unknown host flubber For reference since I suspect it will be useful, here is the output of the route print command from the DOS CMD prompt: route print =========================================================================== Interface List 30 ...00 05 9a 3c 7a 00 ...... Cisco AnyConnect VPN Virtual Miniport Adapter for Windows 11 ...00 1b 9e c4 de e5 ...... Atheros AR5007EG Wireless Network Adapter 26 ...00 50 56 c0 00 01 ...... VMware Virtual Ethernet Adapter for VMnet1 28 ...00 50 56 c0 00 08 ...... VMware Virtual Ethernet Adapter for VMnet8 1 ........................... Software Loopback Interface 1 12 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 13 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 32 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #4 27 ...00 00 00 00 00 00 00 e0 isatap.{E5292CF6-4FBB-4320-806D-A6B366769255} 17 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 20 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #8 22 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #10 24 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #11 25 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #12 29 ...00 00 00 00 00 00 00 e0 isatap.{C3852986-5053-4E2E-BE60-52EA2FCF5899} 41 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #14 =========================================================================== At the top window border of the VM, clicking on Virtual Machine, then clicking on Virtual Machine Settings, then clicking on Network Adapter, I have these two options checked: [X] Bridged: Connected directly to the physical Network [X] Replicate physical network connection state [ ] NAT: used to share the hosts's IP address [ ] Host-only: A private network shared with the host [ ] LAN segment: [ ] <LAN Segments...> <Advanced> I've toyed with the other options such as NAT and Host-only but that had no effect. Is there some way to allow the VM to access those <remote_system>'s?

    Read the article

  • KVM guest io is much slower than host io: is that normal?

    - by Evolver
    I have a Qemu-KVM host system setup on CentOS 6.3. Four 1TB SATA HDDs working in Software RAID10. Guest CentOS 6.3 is installed on separate LVM. People say that they see guest performance almost equal to host performance, but I don't see that. My i/o tests are showing 30-70% slower performance on guest than on host system. I tried to change scheduler (set elevator=deadline on host and elevator=noop on guest), set blkio.weight to 1000 in cgroup, change io to virtio... But none of these changes gave me any significant results. This is a guest .xml config part: <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/dev/vgkvmnode/lv2'/> <target dev='vda' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </disk> There are my tests: Host system: iozone test # iozone -a -i0 -i1 -i2 -s8G -r64k random random KB reclen write rewrite read reread read write 8388608 64 189930 197436 266786 267254 28644 66642 dd read test: one process and then four simultaneous processes # dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct 1073741824 bytes (1.1 GB) copied, 4.23044 s, 254 MB/s # dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct skip=1024 & dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct skip=2048 & dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct skip=3072 & dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct skip=4096 1073741824 bytes (1.1 GB) copied, 14.4528 s, 74.3 MB/s 1073741824 bytes (1.1 GB) copied, 14.562 s, 73.7 MB/s 1073741824 bytes (1.1 GB) copied, 14.6341 s, 73.4 MB/s 1073741824 bytes (1.1 GB) copied, 14.7006 s, 73.0 MB/s dd write test: one process and then four simultaneous processes # dd if=/dev/zero of=test bs=1M count=1024 oflag=direct 1073741824 bytes (1.1 GB) copied, 6.2039 s, 173 MB/s # dd if=/dev/zero of=test bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test2 bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test3 bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test4 bs=1M count=1024 oflag=direct 1073741824 bytes (1.1 GB) copied, 32.7173 s, 32.8 MB/s 1073741824 bytes (1.1 GB) copied, 32.8868 s, 32.6 MB/s 1073741824 bytes (1.1 GB) copied, 32.9097 s, 32.6 MB/s 1073741824 bytes (1.1 GB) copied, 32.9688 s, 32.6 MB/s Guest system: iozone test # iozone -a -i0 -i1 -i2 -s512M -r64k random random KB reclen write rewrite read reread read write 524288 64 93374 154596 141193 149865 21394 46264 dd read test: one process and then four simultaneous processes # dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=1024 1073741824 bytes (1.1 GB) copied, 5.04356 s, 213 MB/s # dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=1024 & dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=2048 & dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=3072 & dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=4096 1073741824 bytes (1.1 GB) copied, 24.7348 s, 43.4 MB/s 1073741824 bytes (1.1 GB) copied, 24.7378 s, 43.4 MB/s 1073741824 bytes (1.1 GB) copied, 24.7408 s, 43.4 MB/s 1073741824 bytes (1.1 GB) copied, 24.744 s, 43.4 MB/s dd write test: one process and then four simultaneous processes # dd if=/dev/zero of=test bs=1M count=1024 oflag=direct 1073741824 bytes (1.1 GB) copied, 10.415 s, 103 MB/s # dd if=/dev/zero of=test bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test2 bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test3 bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test4 bs=1M count=1024 oflag=direct 1073741824 bytes (1.1 GB) copied, 49.8874 s, 21.5 MB/s 1073741824 bytes (1.1 GB) copied, 49.8608 s, 21.5 MB/s 1073741824 bytes (1.1 GB) copied, 49.8693 s, 21.5 MB/s 1073741824 bytes (1.1 GB) copied, 49.9427 s, 21.5 MB/s I wonder is that normal situation or did I missed something?

    Read the article

  • Configure IPv6 routing

    - by godlark
    I've got IPv6 addresses from SIXXS. My host is connected with SIXXS network over a AICCU tunnel ("sixxs" interface). My host address is 2001:::2, the host on the end has address 2001:::1. On my host IPv6 is fully accessible. I have problem with configuring IPv6 network on VMs. I use VirtualBox, the VM (Ubuntu) uses tap1 (on the host bridged by br0) #!/bin/sh PATH=/sbin:/usr/bin:/bin:/usr/bin:/usr/sbin # create a tap tunctl -t tap1 ip link set up dev tap1 # create the bridge brctl addbr br0 brctl addif br0 tap1 # set the IP address and routing ip link set up dev br0 ip -6 route del 2001:6a0:200:172::/64 dev sixxs ip -6 route add 2001:6a0:200:172::1 dev sixxs ip -6 addr add 2001:6a0:200:172::2/64 dev br0 ip -6 route add 2001:6a0:200:172::2/64 dev br0 Host: routing table: 2001:6a0:200:172::1 dev sixxs metric 1024 2001:6a0:200:172::/64 dev br0 proto kernel metric 256 2001:6a0:200:172::/64 dev br0 metric 1024 2000::/3 dev sixxs metric 1024 fe80::/64 dev eth0 proto kernel metric 256 fe80::/64 dev sixxs proto kernel metric 256 fe80::/64 dev br0 proto kernel metric 256 fe80::/64 dev tap1 proto kernel metric 256 default via 2001:6a0:200:172::1 dev sixxs metric 1024 Guest: interface eth1 (it is connected with tap1): auto eth1 iface eth1 inet6 static address 2001:6a0:200:172::3 netmask 64 gateway 2001:6a0:200:172::2 Guest: routing table 2001:6a0:200:172::/64 dev eth1 proto kernel metric 256 fe80::/64 dev eth0 proto kernel metric 256 fe80::/64 dev eth1 proto kernel metric 256 default via 2001:6a0:200:172::2 dev eth1 metric 1024 The guest pings to the host, the host pings to the guest, the host pings to 2001:6a0:200:172::1, but the guest doesn't ping to 2001:6a0:200:172::1. The guest tries to ping, on the host (by tcdump) I can capture its packets, but the host doesn't send them to 2001:6a0:200:172::1. What have I missed in configuration?

    Read the article

  • Why does nmap ping scan over a VPN link return all hosts alive?

    - by ewwhite
    I'm curious as to why running an nmap -sP (ping scan) on a remote subnet linked via a Cisco site-to-site IPSec tunnel returns "host up" status for every IP in the range. [root@xt ~]# nmap -sP 192.168.108.* Starting Nmap 4.11 ( http://www.insecure.org/nmap/ ) at 2012-11-22 14:08 CST Host 192.168.108.0 appears to be up. Host 192.168.108.1 appears to be up. Host 192.168.108.2 appears to be up. Host 192.168.108.3 appears to be up. Host 192.168.108.4 appears to be up. Host 192.168.108.5 appears to be up. . . . Host 192.168.108.252 appears to be up. Host 192.168.108.253 appears to be up. Host 192.168.108.254 appears to be up. Host 192.168.108.255 appears to be up. Nmap finished: 256 IP addresses (256 hosts up) scanned in 14.830 seconds However, a ping of a known-down IP simply times out or doesn't return anything... [root@xt ~]# ping 192.168.108.201 PING 192.168.108.201 (192.168.108.201) 56(84) bytes of data. --- 192.168.108.201 ping statistics --- 144 packets transmitted, 0 received, 100% packet loss, time 143001ms Is there a more effective way to scan live devices connected in this manner?

    Read the article

  • Deploying Django on EC2 using Bitnami Djangostack: WSGI script cannot be loadded

    - by Arman
    I've been struggling to deploy Django application on Amazon EC2 using Bitnami Djangostack for the last couple of days. When I go to http://dewey.io I see the default bitnami page (/opt/bitnami/apache2/htdocs/index.html), however, when I open http://dewey.io/portnoy, I get 'Internal Server Error'. But it's known that if mod_wsgi is setup correctly, the DocumentRoot value from httpd.conf is ignored, thus, I should see my Django application when accessing http://dewey.io. Essentially, the main error is this - 'Target WSGI script cannot be loaded as Python module'. Two questions: 1) any ideas how to fix these mod_wsgi errors (the Apache logs are below)? 2) how to disable the default /opt/bitnami/apache2/htdocs/index.html page and show my homepage from django application when accessing http://dewey.io? Thank you in advance! The details On my EC2 instance I"m running 64-bit Ubuntu 12.04 with DjangoStack 1.4-1. My Django project is located here - /opt/bitnami/apps/django/django_projects/portnoy. root@dewey:/opt/bitnami/apps/django/django_projects/portnoy# ls manage.py README.md settings.py site_media users Procfile sandbox static test.py topics urls.py views.py __init__.pyc templates testviews.py Apache error logs (/opt/bitnami/apache2/logs/error_log): [Wed Jul 04 02:29:00 2012] [error] [client 140.180.6.212] File does not exist: /opt/bitnami/apache2/htdocs/favicon.ico [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] mod_wsgi (pid=3990): Target WSGI script '/opt/bitnami/apps/django/scripts/django.wsgi' cannot be loaded as Python module. [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] mod_wsgi (pid=3990): Exception occurred processing WSGI script '/opt/bitnami/apps/django/scripts/django.wsgi'. [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] Traceback (most recent call last): [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/apps/django/scripts/django.wsgi", line 8, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] import django.core.handlers.wsgi [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/apps/django/lib/python2.7/site-packages/django/core/handlers/wsgi.py", line 8, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] from django import http [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/apps/django/lib/python2.7/site-packages/django/http/__init__.py", line 119, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] from django.http.multipartparser import MultiPartParser [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/apps/django/lib/python2.7/site-packages/django/http/multipartparser.py", line 13, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] from django.utils.text import unescape_entities [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/apps/django/lib/python2.7/site-packages/django/utils/text.py", line 4, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] from gzip import GzipFile [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/python/lib/python2.7/gzip.py", line 10, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] import io [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/python/lib/python2.7/io.py", line 60, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] import _io [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] ImportError: /opt/bitnami/python/lib/python2.7/lib-dynload/_io.so: undefined symbol: PyUnicodeUCS2_AsEncodedString [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File does not exist: /opt/bitnami/apache2/htdocs/favicon.ico [Wed Jul 04 02:44:00 2012] [error] [client 140.180.6.212] File does not exist: /opt/bitnami/apache2/htdocs/favicon.ico Let me quickly introduce the contents of the files to make the case more concrete. This is my /etc/apache2/sites-available/default file <VirtualHost *:80> ServerAdmin [email protected] ServerName dewey.io Alias /site_media/ /opt/bitnami/apps/django/django_projects/portnoy/site_media/ Alias /static/ /opt/bitnami/apps/django/lib/python2.7/site-packages/django/contrib/admin/static/ Alias /robots.txt /opt/bitnami/apps/django/django_projects/portnoy/site_media/robots.txt Alias /favicon.ico /opt/bitnami/apps/django/django_projects/portnoy/site_media/favicon.ico CustomLog "|/usr/sbin/rotatelogs /opt/bitnami/apps/django/django_projects/logs/access.log.%Y%m%d-%H%M%S 5M" combined ErrorLog "|/usr/sbin/rotatelogs /opt/bitnami/apps/django/django_projects/logs/error.log.%Y%m%d-%H%M%S 5M" LogLevel warn WSGIProcessGroup dewey.io WSGIScriptAlias / /opt/bitnami/apps/django/scripts/django.wsgi <Directory /opt/bitnami/apps/django/django_projects/portnoy/site_media> Order deny,allow Allow from all Options -Indexes FollowSymLinks </Directory> <Directory /opt/bitnami/apps/django/django_projects/portnoy/conf/apache> Order deny,allow Allow from all </Directory> </VirtualHost> This is my /opt/bitnami/apps/django/scripts/django.wsgi file import os, sys sys.path.append('/opt/bitnami/apps/django/lib/python2.7/site-packages/') sys.path.append('/opt/bitnami/apps/django/django_projects') sys.path.append('/opt/bitnami/apps/django/django_projects/portnoy') os.environ['DJANGO_SETTINGS_MODULE'] = 'portnoy.settings' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler() Here is the relevant portion of /opt/bitnami/apache2/conf/httpd.conf file: ServerRoot "/opt/bitnami/apache2" Listen 80 ServerName dewey.io DocumentRoot "/opt/bitnami/apache2/htdocs" LoadModule wsgi_module modules/mod_wsgi.so WSGIPythonHome /opt/bitnami/python Include "/opt/bitnami/apache2/conf/ssi.conf" Include "/opt/bitnami/apps/django/conf/django.conf" Include "/opt/bitnami/apache2/conf/bitnami/httpd.conf"

    Read the article

  • Internal Server Error with mod_wsgi [django] on windows xp

    - by sacabuche
    when i run development server it works very well, even an empty project runing in mod_wsgi i have no problem but when i want to put my own project i get an Internal Server Error (500) in my apache conf i put WSGIScriptAlias /codevents C:/django/apache/CODEvents.wsgi <Directory "C:/django/apache"> Order allow,deny Allow from all </Directory> Alias /codevents/media C:/django/projects/CODEvents/html <Directory "C:/django/projects/CODEvents/html"> Order allow,deny Allow from all </Directory> in CODEvents.wsgi import os, sys sys.path.append('C:\\Python26\\Lib\\site-packages\\django') sys.path.append('C:\\django\\projects') sys.path.append('C:\\django\\apps') sys.path.append('C:\\django\\projects\\CODEvents') os.environ['DJANGO_SETTINGS_MODULE'] = 'CODEvents.settings' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler() and in my error_log it said: [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] mod_wsgi (pid=1848): Exception occurred processing WSGI script 'C:/django/apache/CODEvents.wsgi'. [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] Traceback (most recent call last): [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\core\\handlers\\wsgi.py", line 241, in __call__ [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] response = self.get_response(request) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\core\\handlers\\base.py", line 142, in get_response [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return self.handle_uncaught_exception(request, resolver, exc_info) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\core\\handlers\\base.py", line 166, in handle_uncaught_exception [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return debug.technical_500_response(request, *exc_info) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\views\\debug.py", line 58, in technical_500_response [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] html = reporter.get_traceback_html() [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\views\\debug.py", line 137, in get_traceback_html [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return t.render(c) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\template\\__init__.py", line 173, in render [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return self._render(context) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\template\\__init__.py", line 167, in _render [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return self.nodelist.render(context) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\template\\__init__.py", line 796, in render [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] bits.append(self.render_node(node, context)) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\template\\debug.py", line 72, in render_node [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] result = node.render(context) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\template\\debug.py", line 89, in render [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] output = self.filter_expression.resolve(context) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\template\\__init__.py", line 579, in resolve [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] new_obj = func(obj, *arg_vals) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\template\\defaultfilters.py", line 693, in date [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return format(value, arg) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\dateformat.py", line 281, in format [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return df.format(format_string) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\dateformat.py", line 30, in format [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] pieces.append(force_unicode(getattr(self, piece)())) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\dateformat.py", line 187, in r [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return self.format('D, j M Y H:i:s O') [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\dateformat.py", line 30, in format [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] pieces.append(force_unicode(getattr(self, piece)())) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\encoding.py", line 66, in force_unicode [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] s = unicode(s) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\functional.py", line 206, in __unicode_cast [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return self.__func(*self.__args, **self.__kw) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\translation\\__init__.py", line 55, in ugettext [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return real_ugettext(message) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\functional.py", line 55, in _curried [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return _curried_func(*(args+moreargs), **dict(kwargs, **morekwargs)) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\translation\\__init__.py", line 36, in delayed_loader [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return getattr(trans, real_name)(*args, **kwargs) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\translation\\trans_real.py", line 276, in ugettext [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return do_translate(message, 'ugettext') [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\translation\\trans_real.py", line 266, in do_translate [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] _default = translation(settings.LANGUAGE_CODE) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\translation\\trans_real.py", line 176, in translation [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] default_translation = _fetch(settings.LANGUAGE_CODE) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\translation\\trans_real.py", line 159, in _fetch [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] app = import_module(appname) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\importlib.py", line 35, in import_module [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] __import__(name) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\contrib\\admin\\__init__.py", line 1, in <module> [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] from django.contrib.admin.helpers import ACTION_CHECKBOX_NAME [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\contrib\\admin\\helpers.py", line 1, in <module> [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] from django import forms [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\forms\\__init__.py", line 17, in <module> [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] from models import * [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\forms\\models.py", line 6, in <module> [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] from django.db import connections [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\db\\__init__.py", line 75, in <module> [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] connection = connections[DEFAULT_DB_ALIAS] [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\db\\utils.py", line 91, in __getitem__ [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] backend = load_backend(db['ENGINE']) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\db\\utils.py", line 49, in load_backend [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] raise ImproperlyConfigured(error_msg) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] TemplateSyntaxError: Caught ImproperlyConfigured while rendering: 'django.db.backends.postgresql_psycopg2' isn't an available database backend. [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] Try using django.db.backends.XXX, where XXX is one of: [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] 'dummy', 'mysql', 'oracle', 'postgresql', 'postgresql_psycopg2', 'sqlite3' [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] Error was: cannot import name utils please help me!!

    Read the article

  • How to Exclude Directory Effectively from Mod_REWRITE

    - by Codex73
    The problem: 'css' directory gets rewritten also to 'index.php' and displays somehow 'index.php' without style. Should display error as it has it's own htaccess with 'Options All -Indexes' Facts: 'css' subdir doesn't have an index file.(no htaccess on this folder) 'store' subdir does have index file and doesn't get rewritten. (no htaccess on this folder) RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^.+/?$ index.php [NC,L] How can i effectively remove 'css' and 'css/' from the above rule? Tried some variations already.

    Read the article

  • Internal Server Error with mod_wgsi [django] on windows xp

    - by sacabuche
    when i run development server it works very well, even an empty project runing in mod_wsgi i have no problem but when i want to put my own project i get an Internal Server Error (500) in my apache conf i put WSGIScriptAlias /codevents C:/django/apache/CODEvents.wsgi <Directory "C:/django/apache"> Order allow,deny Allow from all </Directory> Alias /codevents/media C:/django/projects/CODEvents/html <Directory "C:/django/projects/CODEvents/html"> Order allow,deny Allow from all </Directory> in CODEvents.wsgi import os, sys sys.path.append('C:\\Python26\\Lib\\site-packages\\django') sys.path.append('C:\\django\\projects') sys.path.append('C:\\django\\apps') sys.path.append('C:\\django\\projects\\CODEvents') os.environ['DJANGO_SETTINGS_MODULE'] = 'CODEvents.settings' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler() and in my error_log it said: [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] mod_wsgi (pid=1848): Exception occurred processing WSGI script 'C:/django/apache/CODEvents.wsgi'. [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] Traceback (most recent call last): [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\core\\handlers\\wsgi.py", line 241, in __call__ [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] response = self.get_response(request) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\core\\handlers\\base.py", line 142, in get_response [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return self.handle_uncaught_exception(request, resolver, exc_info) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\core\\handlers\\base.py", line 166, in handle_uncaught_exception [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return debug.technical_500_response(request, *exc_info) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\views\\debug.py", line 58, in technical_500_response [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] html = reporter.get_traceback_html() [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\views\\debug.py", line 137, in get_traceback_html [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return t.render(c) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\template\\__init__.py", line 173, in render [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return self._render(context) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\template\\__init__.py", line 167, in _render [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return self.nodelist.render(context) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\template\\__init__.py", line 796, in render [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] bits.append(self.render_node(node, context)) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\template\\debug.py", line 72, in render_node [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] result = node.render(context) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\template\\debug.py", line 89, in render [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] output = self.filter_expression.resolve(context) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\template\\__init__.py", line 579, in resolve [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] new_obj = func(obj, *arg_vals) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\template\\defaultfilters.py", line 693, in date [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return format(value, arg) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\dateformat.py", line 281, in format [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return df.format(format_string) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\dateformat.py", line 30, in format [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] pieces.append(force_unicode(getattr(self, piece)())) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\dateformat.py", line 187, in r [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return self.format('D, j M Y H:i:s O') [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\dateformat.py", line 30, in format [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] pieces.append(force_unicode(getattr(self, piece)())) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\encoding.py", line 66, in force_unicode [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] s = unicode(s) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\functional.py", line 206, in __unicode_cast [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return self.__func(*self.__args, **self.__kw) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\translation\\__init__.py", line 55, in ugettext [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return real_ugettext(message) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\functional.py", line 55, in _curried [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return _curried_func(*(args+moreargs), **dict(kwargs, **morekwargs)) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\translation\\__init__.py", line 36, in delayed_loader [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return getattr(trans, real_name)(*args, **kwargs) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\translation\\trans_real.py", line 276, in ugettext [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] return do_translate(message, 'ugettext') [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\translation\\trans_real.py", line 266, in do_translate [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] _default = translation(settings.LANGUAGE_CODE) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\translation\\trans_real.py", line 176, in translation [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] default_translation = _fetch(settings.LANGUAGE_CODE) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\translation\\trans_real.py", line 159, in _fetch [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] app = import_module(appname) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\utils\\importlib.py", line 35, in import_module [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] __import__(name) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\contrib\\admin\\__init__.py", line 1, in <module> [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] from django.contrib.admin.helpers import ACTION_CHECKBOX_NAME [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\contrib\\admin\\helpers.py", line 1, in <module> [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] from django import forms [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\forms\\__init__.py", line 17, in <module> [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] from models import * [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\forms\\models.py", line 6, in <module> [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] from django.db import connections [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\db\\__init__.py", line 75, in <module> [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] connection = connections[DEFAULT_DB_ALIAS] [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\db\\utils.py", line 91, in __getitem__ [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] backend = load_backend(db['ENGINE']) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] File "C:\\Python26\\lib\\site-packages\\django\\db\\utils.py", line 49, in load_backend [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] raise ImproperlyConfigured(error_msg) [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] TemplateSyntaxError: Caught ImproperlyConfigured while rendering: 'django.db.backends.postgresql_psycopg2' isn't an available database backend. [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] Try using django.db.backends.XXX, where XXX is one of: [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] 'dummy', 'mysql', 'oracle', 'postgresql', 'postgresql_psycopg2', 'sqlite3' [Mon May 24 23:31:39 2010] [error] [client 127.0.0.1] Error was: cannot import name utils please help me!!

    Read the article

  • Perl character encoding

    - by Kartlee
    Hi People, I have an environment variable set in Windows as TEST=abc£ which uses Windows-1252 code page. Now when I run a perl program - 'test.pl', this environment value comes properly. When I call another perl code - 'test2.pl' from 'test1.pl' either by system(..) or Win32::process(..), the environment comes garbled. Can someone provide information why this could be and way to resolve it? The version of perl I am using is 5.8. If my understanding is right, perl internally uses 'utf-8', so the initial process - 'test1.pl' received it right from windows1252-utf-8. When we call another process, should we convert back to windows 1252 code page? -Kartlee

    Read the article

  • Django/Mod_WSGI error: UnboundLocalError: local variable 'resolver' referenced before assignment

    - by ycseattle
    Hello, I've setup the Django with mod_wsgi and run into this error. I thought maybe the sys.path was not setup correctly but I tried everything I could think of with no luck. Any suggestions? The following is the apache2 log for the error: mod_wsgi (pid=2579): Exception occurred processing WSGI script '/home/myapp/myapp.wsgi'. Traceback (most recent call last): File "/usr/local/lib/python2.6/dist-packages/django/core/handlers/wsgi.py", line 241, in __call__ response = self.get_response(request) File "/usr/local/lib/python2.6/dist-packages/django/core/handlers/base.py", line 142, in get_response return self.handle_uncaught_exception(request, resolver, exc_info) UnboundLocalError: local variable 'resolver' referenced before assignment The following is the content in the myapp.wsgi: import os import sys # put the Django project on sys.path sys.path.insert(0, os.path.abspath(os.path.join(os.path.dirname(__file__), "../"))) os.environ["DJANGO_SETTINGS_MODULE"] = "photopier.settings" #os.environ["PYTHONPATH"]="/home" from django.core.handlers.wsgi import WSGIHandler application = WSGIHandler()

    Read the article

  • 301 Redirect adding incorrect extra segments to a url

    - by Pentland_web
    I need to 301 redirect one segment of a url to a new version of it. My aim is redirect www.domain.co.uk/farm/whatever/ to www.domain.co.uk/farm_cottages/whatever/ The rule I am using to do this is: RedirectMatch 301 ^/farm/ /farm_cottages/ However for some reason it partially works but appends ?/farm/ after farm_cottages/ in the final url ie. www.domain.co.uk/farm_cottages/?/farm/whatever/ Here is my entire rewrite rule set as I believe one of the rewrite rules could be interfering with the redirect rule. #redirect /farm/ to /farm_cottages/ RedirectMatch 301 ^/farm/ /farm_cottages/ <IfModule mod_rewrite.c> RewriteEngine on # no WWW to WWW RewriteCond %{HTTP_HOST} !^www.domain.co.uk$ [NC] RewriteRule ^(.*)$ http://www.domain.co.uk/$1 [R=301,L] # Force trailing slash on URLs RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_URI} !(.*)/$ RewriteRule ^(.*)$ http://www.domain.co.uk/$1/ [L,R=301] #Remove index.php RewriteCond $1 !\.(gif|jpe?g|png)$ [NC] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ /index.php?/$1 [L] RewriteCond %{THE_REQUEST} ^[^/]*/index\.php [NC] RewriteRule ^index\.php(.+) $1 [R=301,L] </IfModule> The site is built in Expressionengine and so the segments of url do not represent actual folders - I don't think this should matter though. Any ideas would be much appreciated! Thanks

    Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >